You are on page 1of 1

SWG to Metric conversion chart

NP-SWG/MM-2004

Standard Wire Gauge to Metric Conversion Chart Gauge 4 swg 6 swg 8 swg 10 swg 12 swg 14 swg 16 swg 18 swg 20 swg 22 swg 24 swg Note: We now manufacture the majority of our Rivet Bushes with spigot lengths to suit the standardised metric panel thicknesses as above. However, for anyone manufacturing using panels with a genuine SWG size, the revised spigot lengths should cause no problems. For specific information or advice contact our sales office on +44 (0) 1302 836010. mm 5.89 4.88 4.06 3.25 2.64 2.03 1.63 1.22 0.914 0.711 0.559 Standardised Metric Material 6.00 5.00 4.00 3.00 2.50 2.00 1.50 1.20 1.00 0.80 0.60

http://www.npfasteners.com email: sales@npfasteners.com


Head Office Northern Precision Ltd Unit 3 Durham Lane, Armthorpe Doncaster DN3 3FE United Kingdom Tel: +44 (0)1302 836010 Fax: +44 (0)1302 836012

This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any product using such information and to ensure that any publication or data used is up to date and has not been superseded. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.

You might also like