Professional Documents
Culture Documents
be think innovate
Go green with E
The reasons for choosing Grundfos E-solutions in industrial applications are many. The advanced functionality offers extensive possibilities for complete process control just as significant energy savings can be gained by controlling the pumps speed according to demand.
Sustainability is at the very heart of Grundfos and our full line of E-solutions is just one of many contributions to a greener world. Using E-pumps in your system, combined with correct sizing and the right control strategy, you can achieve significant energy savings depending on your load profile up to 60% because the pump is performing according to demand. We were the first pump manufacturer in the world to market a pump solution with builtin frequency converter and we continue to use our experience to break new ground in E-pump technology. To offer you the most valuable solutions.
Challenge High ambient temperature Radio interference Power supply irregularities Tough environment Targeted functionality Dedicated user interface Limited space Commissioning advanced systems Energy savings
Solution Grundfos motors can operate in 60C ambient temperature. If the max. allowed temperature is exceeded the motors can continue with reduced performance. All E-motors have full EMC filters built in as standard. No extra filters are needed. The drive can handle high supply imbalance, industrial voltage spikes VDE160 and lightning induced interference. Delivered in IP55 and can handle high humidity, large temperature cycles and rough environment. It can be modified for special environments. Each motor is designed for pump use and can be further trimmed for special applications. E-motors can be delivered with a variety of operating panels, digital and analogue input and output, bus communication and a high tech PC operating tool. E-motors are compact and designed with easy handling and limited space in mind. Pre-configured pumps and custom-defined set-up remove the inconvenience of studying manuals, programming and testing during commissioning. The built-in frequency converter adjusts pump speed to actual demands to reduce energy consumption
Grundfos Blueflux is the best solution within energy-efficient motors and variable speed drives (MG motors, MGE motors and CUE drives). Grundfos Blueflux either meets or exceeds legislative requirements, such as the EUP IE3 grade.
4 / APPLICATION AREAS
Customise to go further
If a standard product is not enough to cover your specific needs customised software is available to take your system upgrade even further. Customised software enables you to embed exactly the functionalities you want in your pumps and to change the way they perform: > Pump curves can be stretched and bent > Inputs and outputs can be dedicated > Advanced functions and set-up can be selected > A variety of user interfaces can be chosen > Plus much more.
Temperature Control
E-solutions are the obvious solution to a variety of challenges encountered in temperature control applications, where regulating temperature is often crucial to ensure efficient processes. In addition to peace of mind, the E-solution may provide you with significant energy savings.
> Regulating differential temperature Set the E-solution to regulate the differential temperature across a heat exchanger, hydronic heating system or cooling tower to maintain a constant temperature for secondary regulating devices. > Constant flow regulation E-solutions keep the flow constant to optimise the performance of the heat exchangers when attached to other regulating equipment.
Boiler Feed
Industrial Booster
Compensate for unstable pump curves
The unstable part of the pump curve needs to be eliminated. The control compensates for pressure drop at low flow. Regulating loop can work as expected.
Hm 180 160 140 120 100 80 60 40 20 0 0 2 4 6 8 10 12 Q m3/h
Control unit The frequency converter efficiently controls the pump speed and adapts it to actual demand. The result is stable operation and reduced energy consumption. Choose between the wall- mounted CUE frequency converter or Pump protection The LiqTec sensor prolongs the pumps life by checking the temperature around the shaft seal and for presence of liquid. In case of dry-running the LiqTec function automatically shuts down the pump before any damage is done. the MGE variant which is integrated in the pumps motor.
Monitor Through reliable monitoring and supervision of critical parameters the intelligent CR monitor is able to predict pump and system failures long before they occur. This reduces costly downtime to an absolute minimum and increases your peace of mind.
DP
Bus communication Motor protection The electronic motor protection, MP204, protects the motor from overload, no load, overvoltage, undervoltage and other variations in the power supply in order to avoid expensive downtime. Grundfos industrial BUS communication interfaces enable connection to standard fieldbus networks, allowing you to minimise the time spent on reporting and data collection. The interface is compatible with any SCADA, PLC and Building Management System.
f
Flow Grundfos VFI flow sensor successfully combines the established vortex principle with our patented Silicoat technology, enabling direct contact between the sensor and the media to allow for fast response times. The silicone properties also offer extreme resistance to corrosion and make for flawless operation even in aggressive media.
DP + T
Differential Pressure & TEMPERATURE The DPI differential transmitter comes in a high grade stainless steel housing, or for very demanding applications in a titanium version. The Grundfos transmitters require no configuration upon installation, but simply need to be mounted and plugged in to begin reliable operation. The sensor comes in a version combined with temperature measurement two sensors in one!
P + T
PRESSURE, DIFFERENTIAL PRESSURE & TEMPERATURE Benefit from very accurate measurement in almost any liquid with the RPI pressure transmitter. The sensor comes in a version combined with temperature measurement two sensors in one!
>
TTisl ipit iriure veros augiatie velent velenisi. Na core magnim vendre feuguer iustrud magna feugait er sed magniam Efficiency meets innovation to create eugiatio consed dunt non eugiat. Urer alisim in henissectem astounding electricity savings iusciduisit amet, sequat. Im vel ipit alit alismodolor sequis nulputat. Velissit ipit doloborercil dolobore facip ese ex ex ea faccummodiam dolenisim volorpehas raesenim velenit nulluptat Putting sustainability first, Grundfos initiated Meet the Energy alis nim ilis enim velis nis am nit luptat. Od magna feugiam Challenge NOW. The purpose of this initiative is to position pumps on ectem dit nons ad magnismod dunt eraesequis et praessissi. the global climate agenda and to make a wide range of stakeholders Ecte magna facil in utatue magna aliqui te tet lore dolutat within different industries aware of the fact that energy savings and am, cons numodi onseui te delnt aliquat. CO2 reductions can be obtained by implementing already available technology. Pumps represent a massive and hidden potential for Heating savings, in both energy and cost. With 10% of the worlds electricity Cooling consumption used for pumps, optimisation of pump systems Water Supply evidently represents untapped potential. As a matter of fact it is Wastewater possible to save as much as 4% of the worlds electricity consumption Fire Fighting Dosingswitches to high efficiency pump systems. if everybody Industrial Processes As the pioneers of this agenda, Grundfos has developed the Grundfos Blueflux label. Motors and variable frequency drives bearing this label for pumps certify minimal electricity usage while ensuring top-of-the-line performance and reliability. Grundfos Blueflux is the result of constant advancements in integrated motor technology and is designed to continuously deliver the very highest possible level of efficiency. Explore the complete Grundfos portfolio at
Meet the energy challenge
www.grundfos.com
Poul Due Jensens Vej 7 www.grundfos.com DK-8850 Bjerringbro The name Grundfos, the Grundfos logo, and the payoff BeThinkInnovate are registered trademarks Tel: +45owned 87 50 14 00 Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide. by Grundfos www.grundfos.com
Poul Due Jensens Vej 7 DK-8850 Bjerringbro Tel: +45 87 50 14 00 Grundfos Holding A/S
The name Grundfos, the Grundfos logo, and the payoff BeThinkInnovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
98187122/0512