You are on page 1of 1

STRUCTURAL AND MODAL ANALYSYS OF A300 WING STRUCTURE:

In this project Structural and modal analysis of A300 wing structure, we aim to learn the process to solve many engineering problems with the help of a solver commonly known as SPARSE direct solver which is the default solver in ANSYS without preparing the prototype model and caring the actual experiments.

Methodology:
The methods used in solving any problem in ANSYS vary from person to person. In this project we aim at developing a CAD model of A300 (Airbus-300) using the modeling software CATIA V5.

Result:
The results obtained by ANSYS software are just approximate results which accounts for various conditions which cannot be considered in analytical method and cannot give 100% accurate results as experimental values are obtained.

Conclusion:
The main purpose of the project shall be to determine the structural parameters such as total deformation, equivalent stresses which is also known as Von-Mises stress, shear stress, shear intensity on the skin of the aircraft wing which has a thickness of 10mm.

You might also like