Professional Documents
Culture Documents
http://autocad.compago.it/manuale2012/en/filesAUG/WS1a9193826455...
Home
Search
These settings are available on the Modify/New Dimension Style dialog box, Primary Units tab. Control the Display of Alternate Units You can create dimensions in two systems of measurement simultaneously. A common use of this feature is to add feet and inches dimensions to drawings created using metric units. The alternate units appear in square brackets ([ ]) in the dimension text. Alternate units cannot be applied to angular dimensions. If alternate-units dimensioning is on when you edit a linear dimension, the measurement is multiplied by an alternate scale value that you specify. This value represents the number of alternate units per current unit of measurement. The default value for imperial units is 25.4, which is the number of millimeters per inch. The default value for metric units is about 0.0394, which is the number of inches per millimeter. The number of decimal places is specified by the precision value for alternate units. For example, for imperial units, if the alternate scale setting is the default value, 25.4, and the alternate precision is 0.00, the dimension might look like the following figure.
1 of 3
03/09/2013 10:50
http://autocad.compago.it/manuale2012/en/filesAUG/WS1a9193826455...
Procedure
To add and format primary units
Annotation panel
2. In the Dimension Style Manager, select the style you want to change. Click Modify. 3. In the Modify Dimension Style dialog box, Primary Units tab, under Linear or Angular Dimensions, select a unit format and precision value for the primary units. 4. Under Linear Dimensions, enter any prefix and suffix for the displayed dimension. 5. Click OK. 6. Click Close to exit the Dimension Style Manager.
To add and format alternate units
Annotation panel
2. In the Dimension Style Manager, select the style you want to change. Click Modify. 3. In the Modify Dimension Style dialog box, Alternate Units tab, select Display Alternate Units. 4. Under Alternate Units Select a unit format from the list. Select a precision value for the alternate units. Enter any prefix and suffix for the displayed dimension, including a space character if you want a gap between the dimension and the prefix or suffix. 5. Click OK. 6. Click Close to exit the Dimension Style Manager.
2 of 3
03/09/2013 10:50
http://autocad.compago.it/manuale2012/en/filesAUG/WS1a9193826455...
Quick Reference
Commands System Variables
3 of 3
03/09/2013 10:50