Professional Documents
Culture Documents
Materials of Construction
316" (80400mm) 18 & 20" (450 & 500mm)
A6 A8 A8 A7 A7 A1 A5 A1
A6
A4 A10 A2 A5
A2
A3
Description
Body NBR or EPDMseat is permanently bonded to the body
Material
Cast Iron ASTM A126 Class B Ductile Iron ASTM A536 Grade 65-45-12 Cast Iron ASTM A48 Class 40C Ductile Iron ASTM A536 Grade 65-45-12 316 Stainless Steel, ASTM A743, Type CF8M 316 Stainless Steel, ASTM A276, Type 316 316 Stainless Steel, ASTM A276, Type 316 (250B) 17-4 PH Stainless Steel, H1100 304 Stainless Steel, ASTM A276, Type 304 316 Stainless Steel, ASTM A276, Type 316 17-4 PH Stainless Steel, ASTM A564, Type 630 Condition 1150 Steel AISI 1018 Nylon and Molybdenum Disulphite Composition (NBR Seat) PTFE (EPDM Seat) (250B) Teflon/Dacron Fabric Liner, Fiberglass back-up shell Acrylonitrile Butadiene (NBR Seat) Ethylene Propylene Diene Terpolymer (EPDM Seat) 304 Stainless Steel, ASTM A276, Type 304 (250B) 17-4 PH Stainless Steel, Condition 1100 188 Stainless Steel 304 Stainless Steel, ASTM A276, Type 304 316 Stainless Steel, ASTM A276, Type 316 17-4 PH Stainless Steel, ASTM A564, Type 630 Condition 1150 188 Stainless Steel 38" (80200mm) Carbon Steel, SAE J403, Grade 1008/1010 1020" (250500mm) Malleable Iron, ASTM A47-52 Grade 35018 (250B, 36" (80150mm)) Carbon Steel, SAE J403, Grade 1008/1010 (250B, 820" (200500mm)) Malleable Iron, ASTM A47-52 Grade 35018 Nylon and Molybdenum Disulphide Composition (NBR Seat) PTFE (EPDM Seat) (250B) Teflon/Dacron Fabric Liner, Fiberglass back-up shell
A2 Disc A3 Disc Seating Edge A4 Tangential Pin 1420" (350500mm) Shaft 316" (80400mm) A5 Upper Shaft 1820" (450600mm) A6 Key A7 Upper Journal Bearing A8 Packing A10 Torque Screw 312" (80300mm) A10 Set Screw 1420" (350500mm) A11 Lower Shaft 1820" (450600mm) A12 Set Screw 1820" ( 450500mm) A16 Plug 320" (80500mm) A32 Lower Journal Bearing
Materials of Construction
2472" (6001800mm) Valve Sizes
Item Description
A1 Body A2 Seat A6 Thrust Bearing Cover A7 Screw A8 O-Ring A9 Thrust Collar Set Screw A10
2442" (6001100mm)
See Detail E A16 A20 A19 A17 A15 A13 A14 A33 Seat Side A11 A1 A25 A30 A31 See Detail A See Detail B
Material
Cast Iron, ASTM A126 Class B Ductile Iron, ASTM A536 Grade 65-45-12 Acrylonitrile-Butadiene (NBR) Terpolymer of Ethylene, Propylene and a Diene (EPDM) Cast Iron, ASTM A126 Class B Ductile Iron, A536 Grade 65-45-12 18-8 Stainless Steel Acrylonitrile-Butadiene (NBR) Terpolymer of Ethylene Propylene and a Diene (EPDM) Steel, ASTM 108 18-8 Stainless Steel Cast Iron ASTM A48 Class 40C Ductile Iron ATM A536 Grade 65-45-12 316 Stainless Steel, ASTM A240, Type 316 2448" (6001200mm) 304 Stainless Steel, ASTM A276, Type 304 5472" (14001800mm) 303 Stainless Steel, ASTM 582, Type 303 18-8 Stainless Steel 304 Stainless Steel, ASTM A276, Type 304 316 Stainless Steel, ASTM A276, Type 316 17-4 PH Stainless Steel, ASTM, Type 630 Condition 1150 Steel AISI 1018 Teflon/Dacron Fabric Liner, Fiberglass back-up shell NBR Acrylonitrile-Butadiene (NBR Seat) EPDM Ethylene Propylene and a Diene (EPDM Seat) 316 Stainless Steel, ASTM A276, Type 316 Bronze ASTM B-62 18-8 Stainless Steel 18-8 Stainless Steel 304 Stainless Steel, ASTM A276, Type 304 316 Stainless Steel, ASTM A276, Type 316 17-4 PH Stainless Steel, ASTM, Type 630 Condition 1150 303 Stainless Steel, ASTM A582, Type 303 18-8 Stainless Steel Carbon Steel AISI A108 18-8 Stainless Steel 18-8 Stainless Steel Epoxy Acrylonitrile-Butadiene (NBR) Terpolymer of Ethylene Propylene and a Diene (EPDM)
A11 Disc A12 Disc Edge A13 Disc Pin A14 Nut A15 Upper Shaft A16 A17 Key Bearing
A19 Packing A20 A22 A23 A24 Spacer 30-48" (7501200mm) Gland 60-72" (15001800mm) Screw (Used with A22) Washer (Used with A22)
4872" (12001800mm)
A16 See Detail E A15 A20 A19 A17 A13 A33 A14 A11 A11 A1
A25 Lower Shaft A26 A27 A29 A30 A31 A32 Adjusting Screw Jam Nut Thrust Plate Screw 2448" (6001200mm) Lockwasher 2448" (6001200mm) Epoxy
A33 O-Ring
Contact Sartell Valves, Inc. for materials of construction on valve sizes 78120" (20003000mm).
A12 A32 A2
A22
A29 A7
A19 Detail E Adjustable Packing Optional on 2448" (6001200mm) Standard on 5472" (14001800mm)
A10
Cv/Kv Values
Class 150B
Valve Size
3" 80mm 4" 100mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm
4872" (12001800mm)
Dome Cv/Kv
3 3 4 4 5 4 7 6 9 8 11 10 14 12 18 16 22 19 27 23 34 29 41 36 49 42 58 50 66 57 75 65 87 75 98 85 100 87
Dome Cv/Kv
356 308 646 559 1,360 1,176 2,390 2,067 3,840 3,322 5,630 4,870 7,700 6,661 9,980 8,633 12,400 10,726 15,500 13,408 22,500 19,463
Flat Cv/Kv
3 3 4 4 6 5 8 7 10 9 12 12 15 13 19 16 23 20 28 24 35 30 42 36 49 42 55 48 61 53 69 60 79 68 91 79 100 87
% Open
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
Flat Cv/Kv
1 1 2 2 4 4 5 4 6 5 7 6 9 8 13 11 15 13 18 16 23 20 28 24 35 30 44 38 55 48 67 58 79 68 96 83 100 87
Dome Cv/Kv
2 2 2 2 3 3 4 4 6 5 8 7 10 9 14 12 18 16 22 19 27 23 33 29 41 36 48 42 59 51 71 61 84 73 96 83 100 87
Contact Sartell Valves, Inc. for Cv/Kv Values on 78120" (20003000mm) valves and for Class 250B.
Applicable Standards
DeZURIK Water Controls AWWA valves are in conformance with the industry standards listed below.
Valves conform to AWWA Standard ANSI/AWWA C-504, Rubber-Seated Butterfly Valves. Dimensions and drilling of flanged end connections conform to Class 125 sections of ASME/ANSI B16.1, Cast Iron Pipe Flanges and Flanged Fittings. Mechanical-Joint bell dimensions conform to ANSI/AWWA C111/A21.11, Rubber Gasket Joints for Ductile Iron and Gray Iron Pressure Pipe and Fittings. Bonding of 3" (80mm) through 20" (600mm) seat conforms to ASTM D429, Standard Test Methods for Rubber Property Adhesion to Rigid Substrates. Ozone resistance of seat material conforms to ASTM D1149, Standard Test Method for Rubber Deterioration Surface Ozone Cracking in a Chamber. Seat material volume increase is less than 2% after immersion in distilled water for 70 hours, when tested in accordance with ASTM D471, Standard Test Method for Rubber Property Effect of Liquids. Materials conform to standards as listed in the Materials of Construction.
Ordering Information
Valve Style BAW = AWWA Butterfly Valve
Valve Size
3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 28" 30" 36" (80mm) (100mm) (150mm) (200mm) (250mm) (300mm) (350mm) (400mm) (450mm) (500mm) (600mm) (700mm) (750mm) (900mm) 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 102" 108 114" 120" (1100mm) (1200mm) (1400mm) (1500mm) (1700mm) (1800mm) (2000mm) (2100mm) (2300mm) (2400mm) (2600mm) (2700mm) (2900mm) (3000mm)
Seat Material
Note: All orders for 28" (700mm) and larger must include valve pipeline mounting position and shaft orientation as second line information.
EPDM =
150B = 250B =
DI = Ductile Iron
F1 = 372" (801800mm) (Standard Option) Class 25A, 75B, 150B, 250B 78120" (20003000mm) On Application F2 = 354" (801400mm) (Standard Option) Class 250B 60120" (15003000mm) On Application
DI = Ductile Iron disc with 316 stainless steel edge Class 25A 2848" (7001200mm) On Application Class 75B 2872" (7001800mm) Class 150B 372" (801800mm); 78120" (20003000mm) On Application Class 250B 354" (801400mm) Class 250B 60120" (15003000mm) On Application S2 = 316 stainless steel Class 150B 342" (801100mm) Class 150B 54120" (14003000mm) On Application S1 S2 = = 304 stainless steel shaft (Standard) 316 stainless steel shaft (Standard Option) 17-4 PH stainless steel shaft Class 250B 354" (801400mm) All others on application.
Shaft Material
S5 =
Options
TB = Standard Certified Hyrdostatic Shell Test and Bi-Directional Seat Leak Test. Stainless Steel bolting on valve.
B60
Handwheel actuator for 1420" (350500mm) and 24" (600mm) 75B valves.
Description
Housing Bearing (Housing) Yoke Yoke Nut Assembly Shaft Stop Nut Bearing Collar Pin Thrust Washer Yoke Guide Guide Block (450 ft. lb. Actuator only) O-Ring Bearing Screw (M-7 Actuator only) Expansion Plug O-Ring Pin Handwheel Driver Pointer Seal Wrenching Square
Material
Cast Iron, ASTM A126 Class B Bronze Oil Impregnated Ductile Iron, ASTM A536 80-55-06 Ductile Iron, ASTM A536 80-55-06 Steel, ASTM A29 1144 Steel, AISI 1018 Sintered Stainless Steel Steel, AISI 1215 Chrome Steel, Type 420 Bronze Oil Impregnated Steel, AISI 1018 Steel, AISI 1018 Nitrile Bronze Oil Impregnated Zinc Plated Steel Zinc Plated Steel Nitrile Zinc Plated Steel Cast Iron, ASTM A126 Class B Stainless Steel, 316L Steel 14 Gauge Steel with Nitrile Cast Iron, ASTM A126 Class B
Item Description
B35 B36 B38 B40 B41 Collar Chainwheel Chain Guide Link Closing Pin
Material
Steel, AISI 1215 Cast Iron, ASTM A126 Class B Cast Iron, ASTM A126 Class B Steel Zinc Plated Steel Zinc Plated Fiberglass with Steel Zinc Plated Back (M-7 Actuator) Steel, AISI 1215 Bronze Oil Impregnated Steel Zinc Plated Steel Zinc Plated Steel
B44 Thrust Washer B45 B46 B47 B48 B49 Collar Bearing Set Screw Washer Ring Retainer
B10 B11 B12 B13 B18 B21 B24 B25 B26 B27 B28 B29 B30 B31 B34
Adaptor A36 1220" (300500mm) Steel Hot Rolled Valves Seal 1220" (300500mm) Valves Bearing (Adaptor Plate) Gasket Adaptor 30 & 36" (750 & 900mm) O-Ring 30 & 36" (750 & 900mm) Shaft Extension Carbon Steel, Nitrile Bronze Oil Impregnated Fiber Non-Asbestos Steel, ASTM A36 Nitrile (NBR) Steel, ASTM A36 Bronze Oil Impregnated 30 & 36" (750 & 900mm)
B65 Bearing
Note: Fasteners are zinc plated steel unless stainless steel bolting is specified.
Nut
B34
B27
B57
B46 B45
B40
B38
Description
Housing Bearing Yoke Cover Packing Retainer Link Yoke Nut Guide Nut (LA-4 & LA-6) Retaining Ring Input Shaft O-Ring O-Ring Collar Pin
Material
Cast Iron, ASTM A126 Class B Bronze Oil Impregnated Ductile Iron, ASTM A536 80-55-06 Steel Plate, A36 HR Steel Plate, A36 HR Steel Ductile Iron, ASTM A536 80-55-06 Powder Metal 8020 23B Carbon Steel, SAE 1060-1090 Steel, AISI 1141 Acrylonitrile-Butadiene Acrylonitrile-Butadiene Steel, AISI 1215 Steel Teflon/Glass Fabric, Stainless Steel Backing Teflon/Glass Fabric, Stainless Steel Backing Bronze Oil Impregnated Steel Zinc Plated Stainless Steel, Type 18-8 Steel, AISI 1018 Steel, AISI 1018 Steel, AISI 1018 Steel, AISI 1018 Steel with Nitrile Steel, ASTM A36 Steel Zinc Plated Steel Zinc Plated Steel with Nitrile Steel, ASTM A569 Steel Zinc Plated Cast Iron, ASTM A126 Class B Vinyl Steel Steel Zinc Plated
Item
B48 B50 B51 B52 B53 B54 B55 B56 B57 B58 B62 B63 B64 B65 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B81 B82 B83 B84 B85 B88 B89 B90 B91 B92 B93
Description
Bushing Chain Guide Closing Link Collar Bearing Screw Washer Retaining Ring Adaptor Plate Seal Bearing Gasket Adaptor Gasket Housing (Spur Gear) Pin (Chainwheel) Gasket Screw Screw Seal Pin Pin Retainer Ring Cover Gear Gear Input Shaft (Spur Gear) O-Ring Chainwheel Adaptor (Adj. Packing) Bearing Shaft Extension Washer Expansion Plug Lockwasher
Material
Bronze Oil Impregnated Cast Iron, ASTM A126 Steel Steel, ASTM A36 Bronze Steel Zinc Plated Steel Zinc Plated Carbon Steel Steel, ASTM A36 Garlock Bronze Non-Asbestos Cast Iron, ASTM A126 Class B Non-Asbestos Cast Iron, ASTM A126 Steel Zinc Plated Fiber Non-Asbestos Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Plate, ASTM A36 Carbon Steel Carbon Steel Steel, ASTM A29 Nitrile Cast Iron, ASTM A126 Class B Steel, ASTM A36 Bronze Steel, AISI 1215 Steel Zinc Plated Zinc Plated Steel Zinc Plated Steel
B15 Thrust Washer B16 Thrust Washer B17 B18 B23 B24 B25 B26 B27 B28 B29 B32 B33 B34 B35 B40 B43 B44 B45 B47 Bearing Expansion Plug Retaining Washer Outer Guide Bar Inner Guide Bar Square Nut Stop Nut Seal Pointer Stud Nut Thread Seal Yoke Cover Pin Handwheel Position Plate Shim Expansion Plug
Note: All fasteners are zinc plated steel unless stainless steel bolting is specified.
Handwheel
B35 B44 B34 B91 B33 B29 B28 B32 B27 B15 B18 B17 B8 B47 B46 B34
B25
Chainwheel
B48 B16 B35 B44 B34 B91 B33 B29 B28 B25 B55 B53 B54 B52 B32 B4 B27 B15 B18 B17 B56 B57 B63 B64 B65 B13 B14 B1 B24 B45 B90 B58 B62 B50 B85 B51 B40 B10 B2 B11 B5 B3 B6 B7 B9 B8 B88
B70
Nut
B26 B40
B78
B90 B57 B64 B65 B50 B77 B23 B85 B82 B76 B72 B93 B16 B51 B69 B71 B48
B56
Description
Housing Bearing Yoke Yoke Nut Bearing Stop Nut Guide Rail Gasket
Material
Cast Iron, ASTM A126 Class B Bronze Cast Ductile Iron, A536 Cold Rolled Steel Sintered Stainless Steel Cold Rolled Steel Cold Rolled Steel Neoprene
B13
B25
B29 B30
B11 B13 B19 B23 B24 B25 B29 B30 B35 B49 B50 B55 B56
Lower Yoke Guide (TW-7 only) Steel, AISI 1215 Upper Yoke Guide (TW-7 only) Steel, ASTM A366 Guide Rail (TW-7 only) Gasket Cap Stay Pin Screw Key Adaptor (Hydraulic only) Wiper (Hydraulic only) Steel, ASTM A36 Neoprene Fiberglass Steel Alloy Steel Steel, AISI 1018 Cast Iron, ASTM A126 Class B Carbon Steel
Note: A ll fasteners are zinc plated steel unless stainless steel bolting is specified.
C-540 Construction
Ductile Iron, ASTM A536 65-45-12 Bronze Oil Impregnated Teflon with NBR Steel, AISI 1215 Chrome Plated Acrylonitrile-Butadiene Fiberglass Cast Iron, ASTM A126 Class B Acrylonitrile-Butadiene Virgin Teflon Zinc Plated Steel Ductile Iron, ASTM A536 65-45-12 Steel, AISI C1018 Zinc Plated Zinc Plated Steel Zinc Plated Steel Steel with Nitrile Zinc Plated Steel Zinc Plated Steel Acrylonitrile-Butadiene
10
C-540 Construction
Ductile Iron, ASTM A536 65-45-12 Nickel Plated Bronze Oil Impregnated Teflon with NBR Alemite 47200 Acrylonitrile-Butadiene Fiberglass Cast Iron, ASTM A126 Class B Nickel Plated Acrylonitrile-Butadiene Virgin Teflon Stainless Steel, Type 18-8 Ductile Iron, ASTM A536 65-45-12 Nickel Plated Steel, AISI C1018 Zinc Plated Zinc Plated Steel Zinc Plated Steel Steel with Nitrile Zinc Plated Steel Stainless Steel, Type 18-8 Acrylonitrile-Butadiene
Stainless Steel, ASTM A564, Type 17-4 Stainless Steel, Type 304 Chrome Plated
C16 C11 C12 C19 C13 C15 C14 C8 C7 C29 C6 C1 C4 C17 C18
11
Valve Accessories
Mechanical Joint Accessories
Accessories include bolts, nuts, packing and glands for both ends.
Manual Actuators
10-Position Levers
A 10-position dial provides positive latching in open, closed and eight intermediate positions. A pointer indicates position of disc plus a notch in the handle allows use of a padlock to prevent unauthorized valve operation.
Mounting
Lever actuators can be mounted at standard or 180. Levers are available on 38" (80200mm) valve sizes.
Standard Position 180 Position Seat Side Seat Side
Standard Position
90 Position
180 Position
270 Position
Chainwheel
Seat Side Seat Side
Standard Position
180 Position
Extension Rod
Extension rod is required for use with FSDI floorstand.
AWWA Class
150B 150B 150B 150B 75B 150B 25A 75A/75B 25A
Mounting Positions
Std., 90, 180, 270 Std., 180 Std., 90, 180, 270 Std., 180 Std., 90, 180, 270 Std., 180 Std., 90, 180, 270 Std., 180 Std., 180
Floorstand
For 336" (80900mm) valves with M-Series actuators. Included with floorstand are the couplings, extension pipe and mounting of actuator on floorstand. Contact Sartell Valves, Inc. for floorstands on larger valves and with LA-Series actuators.
12
Floorbox
For use with nut style actuators. It includes floorbox and cover. May be used with valves having standard or extended nut actuators. Top of nut must be 2" (50mm) from top of floorbox. Floorboxes are tee wrench actuated. Tee wrenches must be ordered separately. Box depth is available in 1" (25mm) increments from 6" (150mm) through 18" (450mm). Standard is 6" (150mm).
Neck Extensions
For use with 348" (801200mm) valves with M-Series or LA-Series actuators. Included is an extended valve neck and shaft. Valves for use with neck extensions must be furnished with non-adjust able packing and a non-buried actuator. Extensions are not recommended for use with positioners.
Tee Wrench
For use in actuating 2" (50mm) nut actuators. Available in 4, 5, 6, 7 or 8 foot lengths. Other lengths available on special order.
Cylinder Actuators
DeZURIK Water Controls cylinder actuators are available as double-acting pneumatic or water hydraulic cylinders for either on-off or positioning services. Cylinder actuators per AWWA C-540 should be specified.
Mounting
Cylinder actuators can be mounted at 90 increments from standard.
T- Series
Seat Side
Standard Position
90 Position
G- Series
Seat Side Seat Side Seat Side Seat Side
Standard Position
90 Position
180 Position
270 Position
Electric Motors
When ordering electric motor actuators, please provide information listed on Data Input Checklist at end of bulletin.
13
Floorstand
For 320" (80500mm) valves with T-Series cylinder actuator mounted on floorstand. Included with the floorstand are couplings, the extension pipe and mounting of the actuator on the floorstand.
Gauges
Pneumatic positioners are available with three gauges mounted and piped; electronic positioners are available with two gauges mounted and piped.
Neck Extension
For 320" (80500mm) valves using T-Series Cylinder actuators. Included is the extended valve neck and shaft with actuator mounted.
14
Dimensions
E
Seat Side C
A B C 250B
1.19 30 1.31 33 1.50 38 1.69 43 1.97 50 2.09 53 2.25 57 2.38 60 2.50 64 2.63 67 2.91 74 3.13 80 3.50 89 3.81 97 4.13 105
D 250B
4.12** 105 5.00** 127 6.25** 159 7.50** 191 8.75** 222 10.25** 260 11.50** 292 12.75** 324 14.50 368 17.50 445 20.19 513 23.75 603 27.38 695 30.91 785 35.38 899
E 250B
4.81 122 5.56 141 7.00 178 8.31 211 9.50 241 11.00 279 11.50 292 12.75 324 14.00 356 15.25 387 19.50 495 21.75 552 25.62 651 30.42 773 33.00 838
250B
5.00 127 5.00 127 5.00 127 6.00 152 8.00 203 8.00 203 8.00 203 8.00 203 8.00 203 8.00 203 12.00 305 12.00 305 15.00 381 15.00 381 15.00 381
250B Only
1.25 32 1.25 32 1.25 32 1.25 32
Inches Millimeter Contact Sartell Valves, Inc. for dimensions on valve sizes 54" (1400mm) and larger. *Available in AWWA Class 250B when ordered with 17-4 Shaft and 250 psi bearings. **Flange length exceeds thrust bearing cover in these valve sizes. Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layouts.
15
Dimensions
Basic Valve Mechanical Joint
Valve Size
4" 100mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm 30" 750mm 36" 900mm 42" 1100mm 48" 1200mm
A
8.56 217 8.88 226 9.50 241 9.88 251 10.00 254 12.38 315 12.75 324 13.42 341 13.38 340 13.75 349 17.75 451 18.00 458 18.75 476 19.62 498
B
4.75 121 4.75 121 5.00 127 5.25 133 5.38 137 6.62 168 6.75 171 7.00 178 7.12 181 7.50 191 9.62 244 10.00 254 10.25 260 10.62 270
C
4.75 121 6.03 153 7.16 182 8.38 213 9.66 245 10.91 277 12.06 306 14.03 356 15.02 382 19.00 483 23.00 584 27.38 696 30.91 785 35.38 898
D
5.56 141 7.00 178 8.31 211 9.50 241 11.00 279 11.50 292 12.75 324 13.50 343 15.25 387 18.41 468 22.62 575 25.62 651 30.41 772 33.00 838
E
2.50 64 2.50 64 2.50 64 2.50 64 2.50 64 3.50 89 3.50 89 3.50 89 3.50 89 3.50 89 4.00 102 4.00 102 4.00 102 4.00 102
Inches Millimeter Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layouts.
Seat Side
B E A
16
Lever Actuator
Valve Size
3-4" 80-100mm 6-8" 150-200mm
Seat Side M
2.56 65 2.88 73
N
3.56 90 3.56 90
P
3.00 76 3.00 76
R
14.00 356 14.00 356
P N R
F
7.44 189 11.69 297 9.81 249 14.06 357 10.06 256 13.06 332 15.69 399
G
4.75 121 4.75 121 7.25 184 7.25 184 7.25 184 7.25 184 7.25 184
H
1.62 41 1.62 41 3.50 89 3.50 89 3.50 89 3.50 89 3.50 89
I
3.62 92 3.62 92 7.19 183 7.19 183 7.19 183 7.19 183 7.19 183
J
8.00 203 16.00 406 8.00 203 16.00 406 12.00 305 16.00 406 24.00 610
K
2.25 57 2.25 57 2.19 56 2.19 56 2.19 56 2.19 56 2.19 56
L
5.00 127 5.00 127 5.19 132 5.19 132 5.19 132 5.19 132 5.19 132
Seat Side
Seat Side H
3.50 89 3.50 89
F
15.69 399 21.00 533
G
8.25 210 8.25 210
I
7.19 183 7.19 183
J
24.00 610 36.00 914
K
3.19 81 3.19 81
L
6.19 157 6.19 157
M H
8.25 210 8.25 210
M I
17
Dimensions (continued)
Chainwheel Actuator M-Series 320" (80500mm)
Valve Size
310" 8250mm 12" 300mm 1416" 350400mm 18" 450mm 20" 500mm
Seat Side
H I
3.62 92 3.62 92 3.62 92 7.19 183 7.19 183
F
10.38 264 12.78 325 14.78 375 15.19 386 16.00 406
G
4.75 121 4.75 121 4.75 121 7.25 184 7.25 184
H
1.62 41 1.62 41 1.62 41 3.50 89 3.50 89
J
9.19 233 9.19 233 20.06 510 9.19 233 20.06 510
K
2.25 57 2.25 57 2.25 57 2.19 56 2.19 56
L
5.00 127 5.00 127 5.00 127 5.19 132 5.19 132
Seat Side H J
20.06 510 20.06 510
F
25.62 651 25.62 651
G
7.25 184 8.25 210
H
3.50 89 3.50 89
I
7.19 183 7.19 183
K
2.19 56 3.19 81
L
5.19 132 6.19 157
I F
Nut (M-Series)
Valve Size
314" 80350mm 1624" 400600mm 30" 750mm
F
7.38 188 9.75 248 10.25 260
G
4.75 121 7.25 184 7.56 192
H
1.62 41 3.50 89 4.00 102
I
3.62 92 7.19 183 8.12 206
J
2.00 51 2.00 51 2.00 51
K
2.25 57 2.19 56 3.06 78
L
5.00 127 5.19 132 5.94 151
Seat Side
Inches Millimeter Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layouts.
J K L
18
G
16.31 414 16.31 414 17.88 454 17.88 454 17.88 454
H
3.25 83 3.25 83 4.44 113 4.44 113 4.44 113
I
5.94 151 5.94 151 8.12 206 8.12 206 8.12 206
J
5.38 137 7.88 200 7.88 200 7.88 200 10.25 260
K
1.81 46 1.81 46 3.12 79 3.12 79 3.12 79
L
4.69 119 4.69 119 5.84 148 6.03 153 6.03 153
Seat Side I F G
J Seat Side
F Pneumatic
31.50 800 31.62 803 43.88 1115 31.50 800 31.62 803 43.25 1099 44.62 1133
Hydraulic
32.75 832 33.88 861 41.78 1061 32.75 832 33.88 861 41.78 1061 43.50 1105
G
17.50 445 17.50 445 24.25 616 17.50 445 17.50 445 24.25 616 24.25 616
H
6.88 175 6.88 175 9.00 229 6.88 175 6.88 175 9.00 229 9.00 229
I
4.25 108 5.25 133 5.88 149 4.25 108 5.25 133 5.88 149 7.00 178
J
8.50 216 10.50 267 11.75 298 8.50 216 10.50 267 11.75 298 14.00 356
K
3.25 83 3.25 83 3.50 89 3.50 89 3.50 89 3.75 95 3.75 95
Nut (LA-Series)
Valve Size (Actuator Size)
3042" 7501100mm (LA-4) 3654" 9001400mm (LA-6) 4254" 11001400mm (LA-10) Inches Millimeter
G
9.38 238 12.12 308 16.81 427
H
8.25 210 8.25 210 8.25 210
I
9.44 240 11.12 282 16.12 409
J
2.00 51 2.00 51 2.00 51
K
4.41 112 4.41 112 4.81 122
L
6.25 159 6.25 159 5.84 148
Seat Side
L K I
19
Dimensions (continued)
Handwheel LA-Series 3048" (7501200mm)
Actuator Size
LA-4-HD12 LA-4-HD16 LA-4-HD24 LA-4-HD30 LA-4-HD36
F
11.62 295 12.25 311 20.25 514 22.88 581 25.50 648
G
9.38 238 9.38 238 9.38 238 9.38 238 9.38 238
H
8.25 210 8.25 210 8.25 210 8.25 210 8.25 210
I
9.44 240 9.44 240 9.44 240 9.44 240 9.44 240
J
12.00 305 16.00 406 24.00 610 30.00 762 36.00 914
K
4.41 112 4.41 112 4.41 112 4.41 112 4.41 112
L
6.25 159 6.25 159 6.25 159 6.25 159 6.25 159
Seat Side H I F G
F
13.62 346 14.25 362 22.25 565 24.88 632 27.50 699
G
12.12 308 12.12 308 12.12 308 12.12 308 12.12 308
H
8.25 210 8.25 210 8.25 210 8.25 210 8.25 210
I
11.12 282 11.12 282 11.12 282 11.12 282 11.12 282
J
12.00 305 16.00 406 24.00 610 30.00 762 36.00 914
K
4.41 112 4.41 112 4.41 112 4.41 112 4.41 112
L
6.25 159 6.25 159 6.25 159 6.25 159 6.25 159
L K
F
17.62 448 18.25 464 26.25 667 28.88 734 31.50 800
G
16.81 427 16.81 427 16.81 427 16.81 427 16.81 427
H
8.25 210 8.25 210 8.25 210 8.25 210 8.25 210
I
16.12 409 16.12 409 16.12 409 16.12 409 16.12 409
J
12.00 305 16.00 406 24.00 610 30.00 762 36.00 914
K
4.81 122 4.81 122 4.81 122 4.81 122 4.81 122
L
5.84 148 5.84 148 5.84 148 5.84 148 5.84 148
Inches Millimeter Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layouts.
20
F
35.00 889 35.00 889 35.00 889
G
9.38 238 9.38 238 9.38 238
H
8.25 210 8.25 210 8.25 210
I
9.44 240 9.44 240 9.44 240
J
12.75 324 20.06 510 29.75 756
K
4.41 112 4.41 112 4.41 112
L
6.25 159 6.25 159 6.25 159
Seat Side M H I
F
37.00 940 37.00 940 37.00 940
G
12.12 308 12.12 308 12.12 308
H
8.25 210 8.25 210 8.25 210
I
11.12 282 11.12 282 11.12 282
J
12.75 324 20.06 510 29.75 756
K
4.41 112 4.41 112 4.41 112
L
6.25 159 6.25 159 6.25 159
K L
F
41.00 1041 41.00 1041 41.00 1041
G
16.81 427 16.81 427 16.81 427
H
8.25 210 8.25 210 8.25 210
I
16.12 409 16.12 409 16.12 409
J
12.75 324 20.06 510 29.75 756
K
4.81 122 4.81 122 4.81 122
L
5.84 148 5.84 148 5.84 148
21
Basin/Tank Pump*
Basin/Tank
Other
Other
o Other?___________________________________________________
4. Maximum Fluid Temperature? _______________C _______________F 5. Line Size? _ _ _ _ _ _ _ _ _ _ _ ____inches _______________(mm) (nominal) 6. Normal Working Pressure? _______________psi _______________kPa Maximum (Shutoff) Pressure Differential? _______________psi _______________kPa 7. Normal Wide Open Valve Flow? _______________flow rate or _______________flow units 8. Emergency Maximum (Line Break, Etc.) Flow? _______________flow rate _______________flow units 9. (If Throttling or Modulating Control) Flow Range Desired? Maximum Flow? _______________flow rate _______________flow units Minimum Flow? _______________flow rate _______________flow units 10. Pipe Connection? _______________Flanged _______________Mechanical Joint _______________Other
b. Fail Safe? o Yes o No; If yes which way if valve fails? o Open o Close c. Operating Times? _________sec Open to Close; _________sec Close to Open
d. Accessories? o Speed Control o Limit Switches (ES) (Qty:_______O,_______C,_______I) o Solenoid W/Manual Override o Positioner o Manual Override (On loss of supply press.) o Solenoid W/O Manual Override o Other? ________________________________________________________________________________________________________________________________________________ 4. Electric Specifications: a. Supply?_ _ _ _ _ _ ___Volts_________Phase_________Hz b. Duty Cycle? o Intermittent o Continuous c. Starter/Control Needs?_____________________________________________________________________________________________ d. Operating Times?_________sec (Note: 60 sec per AWWA unless specified) e. Accessories? o AUX Switches o Potentiometer o Slidewire Receiver o Heaters o Control Station o Control Transformer o Reversing Starter o Other?__________________________
22
250 Riverside Ave. N. Sartell, Minnesota 56377 Phone: 320-259-2000 Fax: 320-259-2227
Sartell Valves, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by Sartell Valves, Inc. Certified drawings are available upon request.
Printed in the U.S.A.