You are on page 1of 0

Bearing

Handbook for
Electric Motors

SKF Equipped
The worlds best machinery is

Improve your products performance with SKF engineering


and application knowledge, design and testing expertise,
and a wide range of solutions.
Your customers are continually raising their expectations of
product performance and reliabilitydemanding equipment
that consumes less energy, runs quieter, faster and longer,
and requires less maintenance. Frequently, this also means
lighter, more compact designs.
To meet these growing challenges and stay competitive,
you need a trusted source of knowledge and application
experience to provide you with solutions that work.
And for long-term results, you need a working partner
that offers one source of responsibility from concept to
completion. That source is SKF.

Knowledgeable solutions
From a position as the worlds leading bearing manufacturer,
SKF has evolved to being a provider of cost-effective and
knowledgeable solutions. You can take advantage of SKF
knowledge through our proprietary services and software to
shorten the time required to develop and test your product.
SKF knowledge-engineering services, for example, include
life calculation analysis, dynamic systems modelling, and
3-dimensional virtual test rigs to simulate and troubleshoot
system vibration. SKF product solutions go beyond bearings,
housings and seals, to include complete lubrication systems,
industry-leading condition monitoring systems, advanced
linear and rotary actuation systems, and unique solutions
in mechatronicscombining mechanical and electronic
elements in a single design.
Get SKF Equipped
When your product is SKF Equipped, it tells your
customers that your resources include the best in
state-of-the-art technology, and that your products contain some of the very best components
available on the market.

Contents
Bearing Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
Speed Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5

6200 and 6300 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7


N, NJ, NU 200 EC and 300 EC Series . . . . . . . . . . . . . . . . 8, 9

Shaft and Housing Diameters

6200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6300 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

N, NJ, NU 200 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12


N, NJ, NU 300 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Shaft Shoulder Dimensions

6200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6300 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Minimum Radial Load

N, NJ, NU 200 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16


N, NJ, NU 300 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Grease Relube Recommendations

6200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6300 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

N, NJ, NU 200 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20


N, NJ, NU 300 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Vibration Frequencies

6200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6300 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

N, NJ, NU 200 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

N, NJ, NU 300 EC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ABMA-SKF Product Comparison . . . . . . . . . . . . . . . . . . . . . . . 26, 27

Installation tips for


maximum bearing operation
1.
Handle with care. Never pound directly on a bearing or ring. If a
bearing is dropped, it is best not to install it. Store bearings horizontally in a dry
place in their original unopened package and never place bearings on a dirty
surface; periodically turn over sealed and shielded bearings to prevent grease
from settling to one side.

2.
Inspect the shaft and housing. Check for size and damage; remove
nicks and burrs with emery paper, and wipe clean with a soft cloth. Replace or
repair shafts and housings showing obvious signs of wear or damage. A shaft
placed in a vise for mounting should be protected from vise jaws with a sheet of
soft metal.

3.
Avoid overheating. During heat-mounting operations, never bring a
flame in direct contact with the bearing and never heat beyond 230F. Also,
immediately hold a heat-mounted bearing in place against the shaft shoulder
until it cools and locks in place. Otherwise, the bearing may creep away from
the proper position.

4.
Use identical replacement bearings. Replacement bearings should be
identical to the bearings they replace. Contact an SKF Authorized Distributor or
SKF for interchange information.

5.
Use the right tool for the job. Induction heaters, oil injection kits, and
hydraulic nuts are among the specialized tools available for mounting and
dismounting bearings over 4 in. O.D. Their use lowers the possibility of
damaging bearings and speeds the process.
6.
Pay attention to the bearings press fit. Use a press for any bearing
under 4 in. O.D. Pressure should be applied only to the bearing ring with the
press fit, which is usually the ring that rotates after the bearing is installed.
Pressure to the ring without the press fit will damage the raceways.

7.
Dont wash new bearings. Bearing manufacturers take great care to
package and ship bearings that are dirt-free and ready for lubrication. Theres
usually no need to wash them or remove the protective slushing compound.

8.
Proper lube is critical. Bearing manufacturers evaluate several factors
before determining the type of lubricant required for specific bearings. Be sure
to follow their recommendations. Temperature and contamination conditions
will influence the frequency of lubrication changes.
9.
Rotate idle bearings. Bearings installed in equipment that is subject to
vibration while the shafts are stationary may incur false brinelling damage,
which also occurs when equipment is not properly protected during shipment.
It can appear as bright, polished depressions on the inner and/or outer races,
as well as on the rolling elements.

10.
Look for danger signs. Keep alert for three sure signs of improper
bearing operation: excessive noise and increases in vibration and temperature.
Troubleshooting instruments like hand-held vibration pens, digital
thermometers, and electronic stethoscopes help spot bearings in poor
operating condition.
11.
Find the cause of bearing failures. Bearings are built to last, so
frequent failures may point to an installation or lubrication problem. SKF
bearing analysis experts can identify the cause of bearing failure and help you
prevent it in the future.
12.
The contact between the bearing ring and a properly machined and
dimensioned bearing seat should not require the use of bonding agents to
prevent movement or turning.

Speed ratings
There is a speed limit to which rolling bearings can be operated. Generally, it is
the operating temperature that can be permitted with respect to the lubricant
being used or to the material of the bearing components that sets the limit. The
speed at which this limiting bearing temperature is reached depends on the
frictional heat generated in the bearing (including any externally applied heat)
and the amount of heat that can be transported away from the bearing.
Bearing type and size, internal design, load, lubrication and cooling conditions
as well as cage design, accuracy and internal clearance all play a part in determining speed capability. In the accompanying tables two speeds are listed:
(Thermal) Reference Speed and (Kinematic) Limiting Speed.
Warning: The new Reference and Limiting Speeds are not to be used as a
direct substitution for the previous Oil and Grease speed ratings. Consult SKF
to determine the actual reference speed limit for your operating conditions.

Reference speeds

The reference speed for a given bearing represents the permissible operating
speed of said bearing when subjected to the specific operating conditions of
load, lubrication type and method as outlined in ISO 15312. This standard has
been established for oil lubrication but is also valid for grease and uses the following reference conditions:

A temperature increase of 90 F (50 C) above an ambient temperature of


68 F (20 C), (thus a bearing temperature of 158 F (70 C), measured on
the bearing stationary outer ring or housing washer.
Radial bearing: a constant radial load, being 5% of the basic static load rating Co.
Thrust bearing: a constant axial load, being 2% of the basic static load rating Co.
Open bearings with Normal clearance.

For oil lubricated bearings:


Lubricant: mineral oil without EP-additives having a kinematic viscosity at
158 F (70 C) of: v = 12 mm2/s (ISO VG32) for radial bearings, and
v = 24 mm2/s (ISO VG68) for thrust roller bearings
Oil bath with the oil reaching up to the middle of the rolling element in the
lowest position.

For grease lubricated bearings:


Regular lithium soap grease with mineral base oil having a viscosity of 100 to
200 mm2/s at 104 F (40 C) (e.g. ISO VG 150).
Filling approximately 30% of the free space in the bearing.
The reference speed will be reached after 10 to 20 hours running time. Under
these specific conditions the reference speed for oil and grease lubrication will
be equal.
4

Speeds above the reference speed

It is possible to operate bearings at speeds above the reference speed if the


bearing friction can be reduced, for example by lubrication systems with small,
accurately measured quantities of lubricant or when heat can be removed
from the bearing by circulating oil lubrication with cooling of the oil, by cooling
ribs on the housing, or by directed cooling air streams.

Any increase in speed above the reference speed without taking any of
these precautions would only cause bearing temperature to rise excessively.
An increase of bearing temperature means that lubricant viscosity is lowered and film formation is made more difficult, leading to even higher friction and further temperature increases. If, at the same time, the operational
clearance in the bearing is reduced because of increased inner ring temperature, the final consequence would be bearing seizure.

Limiting speeds

The speed limit is determined by criteria that include: the stability and or
strength of the cage, lubrication of cage guiding surfaces, centrifugal and gyratory forces acting on the rolling elements, and other speed-limiting factors.
Experience gained from laboratory tests and practical applications indicates
that there are maximum speeds that should not be exceeded for technical reasons or because of the very high costs involved.
Limiting Speeds shown in the tables are based on the demands of high speed
running applications and are valid only for the specific design and cage design
shown in the tables. It is possible to run bearings faster than the limiting
speeds, but several factors must be reviewed and improved such as the running accuracy, cage material, lubrication, heat dissipation and design of the
bearing. It is therefore advisable to contact SKF Applications Engineering for
advice. For enclosed and open bearings using grease lubrication, additional
parameters have to be considered such as lubrication of cage guiding surfaces
and the shear strength of the lubricant, which is determined by the base oil
and thickener.

Open balls bearings with low friction typically have Reference Speeds greater
than the Limiting Speed. In these cases the permissible speed must be calculated from the operating conditions and the lower value between the permissible and Limiting speed used.

Speed ratings (RPM)


Deep groove ball bearings
6200 & 6300 series
Bearing

6200
6201
6202
6203
6204
6205
6206
6207
6208
6209
6210
6211
6212
6213
6214
6215
6216
6217
6218
6219
6220
6221
6222
6224
6226
6228
6230
6232
6234
6236
6238
6240

double sealed
limiting
r/min

17,000
15,000
13,000
12,000
10,000

8,500
7,500
6,300
5,600
5,000
4,800
4,300
4,000
3,600
3,400
3,200
3,000
2,800
2,600
2,400

double shielded
limiting
r/min

28,000
26,000
22,000
19,000
17,000

14,000
12,000
10,000
9,000
8,500
8,000
7,000
6,300
6,000
5,600
5,300
4,800
4,500
4,300
4,000

2,400
2,200

3,800
3,600
3,400
3,200
3,000

open
limiting
r/min

34,000
32,000
28,000
24,000
20,000

18,000
15,000
13,000
11,000
11,000

10,000
9,000
8,000
7,500
7,000
6,700
6,000
5,600
5,300
5,000

4,800
4,500
4,300
4,000
3,600

reference
speed
r/min

56,000
50,000
43,000
38,000
32,000

28,000
24,000
20,000
18,000
17,000
15,000
14,000
13,000
12,000
11,000
10,000
9,500
9,000
8,500
8,000

3,400
3,200
3,000
3,800
3,600
3,400
3,200

Warning: The new reference and limiting speeds are not to be used as a direct
substitution for the previous oil and grease speed ratings. See page 4/5 or contact
SKF Applications Engineering.
6

7,500
7,000
6,700
6,300
5,600

5,300
5,000
4,500
4,300
4,000
3,800
3,600

Speed Ratings (RPM)


Deep groove ball bearings
6200 & 6300 series
Bearing

6300
6301
6302
6303
6304
6305
6306
6307
6308
6309
6310
6311
6312
6313
6314
6315
6316
6317
6318
6319
6320
6321
6322
6324
6326
6328
6330
6332
6334
6336
6338

double sealed
limiting
r/min

15,000
14,000
12,000
11,000
9,500
7,500
6,300
6,000
5,000
4,500
4,300
3,800
3,400
3,200
3,000
2,800
2,600
2,400
2,400
2,200

double shielded
limiting
r/min

26,000
22,000
19,000
17,000
15,000
13,000
11,000
9,500
8,500
7,500
6,700
6,300
5,600
5,300
5,000
4,500
4,300
4,000
3,800
3,600

3,400
3,200
3,000

open
limiting
r/min

32,000
28,000
24,000
22,000
19,000

16,000
13,000
12,000
11,000
9,500
8,500
8,000
7,000
6,700
6,300
5,600
5,300
5,000
4,800
4,500

4,300
4,000
3,800
3,400
3,200
4,300
4,000
3,800
3,400
3,200
3,000

reference
speed
r/min

50,000
45,000
38,000
34,000
30,000

24,000
20,000
19,000
17,000
15,000
13,000
12,000
11,000
10,000
9,500
9,000
8,500
8,000
7,500
7,000

6,700
6,300
6,000
5,600
5,000
4,800
4,300
4,000
3,800
3,600
3,400

Note: Low-friction seals (2RZ, 2RSL) and double shielded bearings use same speed ratings. Single enclosure (Z, RSL, RZ) and open bearings use the same speed ratings.

Speed ratings (RPM)


Cylindrical roller bearings
N, NJ, NU 200 EC series
Bearing

reference
speed
r/min

limiting
speed
r/min

202
203
204
205
206

EC
EC
EC
EC
EC

22,000
19,000
16,000
14,000
13,000

26,000
22,000
19,000
16,000
14,000

212
213
214
215
216

EC
EC
EC
EC
EC

6,700
6,300
6,000
5,600
5,300

7,500
6,700
6,300
6,000
5,600

207
208
209
210
211

217
218
219
220
221
222
224
226
228
230

EC
EC
EC
EC
EC

EC
EC
EC
EC
EC
EC
EC
EC
EC
EC

232 EC
234 EC
236 ECMA
238 ECMA
240 ECMA

11,000
9,500
9,000
8,500
7,500

4,800
4,500
4,300
4,000
3,800
3,600
3,400
3,200
2,800
2,600
2,400
2,400
2,200
2,000
1,900

12,000
11,000
9,500
9,000
8,000

5,300
5,000
4,800
4,500
4,300

4,000
3,600
3,400
3,200
2,800
2,600
2,400
3,200
3,000
2,800

Warning: The new reference and limiting speeds are not to be used as a direct
substitution for the previous oil and grease speed ratings. See page 4/5 or contact
SKF Applications Engineering.
8

Speed ratings (RPM)


Cylindrical roller bearings
N, NJ, NU 300 EC series
Bearing

reference
speed
r/min

limiting
speed
r/min

303
304
305
306
307

EC
EC
EC
EC
EC

15,000
15,000
12,000
11,000
9,500

20,000
18,000
15,000
12,000
11,000

313
314
315
316
317

EC
EC
EC
EC
EC

5,300
4,800
4,500
4,300
4,000

6,000
5,600
5,300
5,000
4,800

308
309
310
311
312

318
319
320
321
322
324
326
328
330
332

EC
EC
EC
EC
EC

EC
EC
EC
EC
EC
EC
EC
EC
EC
EC

334 EC
336 EC
338 EC
340 ECMA

8,000
7,500
6,700
6,000
5,600

3,800
3,600
3,200
3,200
3,000
2,800
2,400
2,400
2,200
2,000
1,700
1,600
1,500
1,400

9,500
8,500
8,000
7,000
6,700

4,500
4,300
3,800
3,800
3,400
3,200
3,000
2,800
3,400
2,400

2,200
2,200
2,000
2,400

Shaft and housing diameters


Deep groove ball bearings
6200 series
Bearing

6200
6201
6202
6203
6204
6205
6206
6207
6208
6209
6210
6211
6212
6213
6214
6215
6216
6217
6218
6219

bearing
bore
diameter
(mm)

shaft
diameter (in.)
max.
min.

10
12
15
17
20

0.3939
0.4726
0.5908
0.6695
0.7878

0.3936
0.4723
0.5905
0.6692
0.7875

50
55
60
65
70

1.9690
2.1660
2.3628
2.5597
2.7565

1.9686
2.1655
2.3623
2.5592
2.7560

25
30
35
40
45

75
80
85
90
95

0.9847
1.1815
1.3785
1.5753
1.7722

2.9534
3.1502
3.3472
3.5440
3.7409

0.9844
1.1812
1.3781
1.5749
1.7718

2.9529
3.1497
3.3466
3.5434
3.7403

bearing
outside
diameter
(mm)

30
32
35
40
47

1.1816
1.2604
1.3786
1.5754
1.8510

1.1811
1.2598
1.3780
1.5748
1.8504

90
100
110
120
125

3.5442
3.9379
4.3316
4.7253
4.9223

3.5433
3.9370
4.3307
4.7244
4.9213

52
62
72
80
85

130
140
150
160
170

6220
6221
6222
6224
6226

100
105
110
120
130

3.9377
4.1350
4.3318
4.7255
5.1194

3.9371
4.1344
4.3312
4.7249
5.1187

180
190
200
215
230

6238
6240

190
200

7.4827
7.8764

7.4815
7.8752

340
360

6228
6230
6232
6234
6236

140
150
160
170
180

5.5131
5.9071
6.3012
6.6949
7.0886

5.5124
5.9061
6.3003
6.6940
7.0877

housing
diameter (in.)
max.
min.

250
270
290
310
320

2.0479
2.4416
2.8353
3.1503
3.3474

5.1191
5.5128
5.9065
6.3002
6.6939

7.0876
7.4814
7.8751
8.4657
9.0562

9.8436
10.6312
11.4186
12.2060
12.5998
13.3872
14.1746

2.0472
2.4409
2.8346
3.1496
3.3465

5.1181
5.5118
5.9055
6.2992
6.6929

7.0866
7.4803
7.8740
8.4646
9.0551

9.8425
10.6299
11.4173
12.2047
12.5984
13.3858
14.1732

Note: Diameters shown are based on normal loads, operating temperatures, and current
industry fitting practices. See SKF Bearing Installation and Maintenance Guide (#140-710)
for specific tolerance classes and corresponding fits.
10

Shaft and housing diameters


Deep groove ball bearings
6300 series
Bearing

6300
6301
6302
6303
6304
6305
6306
6307
6308
6309
6310
6311
6312
6313
6314
6315
6316
6317
6318
6319

bearing
bore
diameter
(mm)

shaft
diameter (in.)
max.
min.

bearing
outside
diameter
(mm)

0.9847
1.1815
1.3785
1.5753
1.7722

0.9844
1.1812
1.3781
1.5749
1.7718

62
72
80
90
100

2.9529
3.1497
3.3466
3.5434
3.7403

160
170
180
190
200

10
12
15
17
20

0.3939
0.4726
0.5908
0.6695
0.7878

0.3936
0.4723
0.5905
0.6692
0.7875

50
55
60
65
70

1.9690
2.1660
2.3628
2.5597
2.7565

1.9686
2.1655
2.3623
2.5592
2.7560

25
30
35
40
45

75
80
85
90
95

2.9534
3.1502
3.3472
3.5440
3.7409

housing
diameter (in.)
max.
min.

35
37
42
47
52

1.3786
1.4573
1.6541
1.8510
2.0472

1.3780
1.4567
1.6535
1.8504
2.0479

110
120
130
140
150

4.3316
4.7253
5.1191
5.5128
5.9065

4.3307
4.7244
5.1181
5.5118
5.9055

2.4416
2.8353
3.1503
3.5442
3.9379

6.3002
6.6939
7.0876
7.4814
7.8751

2.4409
2.8346
3.1496
3.5433
3.9370

6.2992
6.6929
7.0866
7.4803
7.8740

6320
6321
6322
6324
6326

100
105
110
120
130

3.9377
4.1350
4.3318
4.7255
5.1194

3.9371
4.1344
4.3312
4.7249
5.1187

215
225
240
260
360

8.4657
8.8594
9.4499
10.2375
11.0249

8.4646
8.8583
9.4488
10.2362
11.0236

6338
6340

190
200

7.4827
7.8764

7.4815
7.8752

400
420

15.7494
16.5370

15.7480
16.5354

6328
6330
6332
6334
6336

140
150
160
170
180

5.5131
5.9071
6.3012
6.6949
7.0886

5.5124
5.9061
6.3003
6.6940
7.0877

300
320
340
360
380

11.8123
12.5998
13.3872
14.1746
14.9620

11.8110
12.5984
13.3858
14.1732
14.9606

Note: Diameters shown are based on normal loads, operating temperatures, and current
industry fitting practices. See SKF Bearing Installation and Maintenance Guide (#140-710)
for specific tolerance classes and corresponding fits.
11

Shaft and housing diameters


Cylindrical roller bearings
N, NJ, NU 200 EC series
Bearing

202
203
204
205
206
207
208
209
210
211
212
213
214
215
216

bearing
bore
diameter
(mm)

shaft
diameter (in.)
max.
min.

bearing
outside
diameter
(mm)

1.3785
1.5753
1.7725
1.9693
2.1664

1.3781
1.5749
1.7721
1.9689
2.1659

72
80
85
90
100

150
160
170
180
190

15
17
20
25
30

0.5910
0.6697
0.7878
0.9847
1.1815

0.5906
0.6693
0.7875
0.9844
1.1812

60
65
70
75
80

2.3632
2.5601
2.7569
2.9538
3.1506

2.3627
2.5596
2.7564
2.9533
3.1501

35
40
47
50
55

217
218
219
220
221

85
90
95
100
105

3.3476
3.5444
3.7413
3.9381
4.1353

3.3470
3.5438
3.7407
3.9375
4.1344

232
234
236
238
240

160
170
180
190
200

6.3012
6.6949
7.0886
7.4827
7.8764

6.3003
6.6940
7.0877
7.4815
7.8752

222
224
226
228
230

110
120
130
140
150

4.3321
4.7258
5.1197
5.5134
5.9075

4.3312
4.7249
5.1187
5.5124
5.9066

housing
diameter (in.)
max.
min.

35
40
47
52
55

1.3786
1.5754
1.8510
2.0479
2.4416

1.3780
1.5748
1.8504
2.0472
2.4409

110
120
125
130
140

4.3316
4.7253
4.9223
5.1191
5.5128

4.3307
4.7244
4.9213
5.1181
5.5118

200
215
230
250
270
290
310
320
340
360

2.8353
3.1503
3.3474
3.5442
3.9379

5.9065
6.3002
6.6939
7.0876
7.4814

7.8751
8.4657
9.0562
9.8436
10.6312
11.4186
12.2060
12.5998
13.3872
14.1746

2.8346
3.1496
3.3465
3.5433
3.9370

5.9055
6.2992
6.6929
7.0866
7.4803

7.8740
8.4646
9.0551
9.8425
10.6299
11.4173
12.2047
12.5984
13.3858
14.1732

Note: Diameters shown are based on normal loads, operating temperatures, and
current industry fitting practices. See SKF Bearing Installation and Maintenance Guide
(#140-710) for specific tolerance classes and corresponding fits.
12

Shaft and housing diameters


Cylindrical roller bearings
N, NJ, NU 300 EC series
Bearing

302
303
304
305
306
307
308
309
310
311
312
313
314
315
316

bearing
bore
diameter
(mm)

shaft
diameter (in.)
max.
min.

bearing
outside
diameter
(mm)

1.3785
1.5753
1.7725
1.9693
2.1664

1.3781
1.5749
1.7721
1.9689
2.1659

80
90
100
110
120

180
190
200
215
225

15
17
20
25
30

0.5910
0.6697
0.7878
0.9847
1.1815

0.5906
0.6693
0.7875
0.9844
1.1812

60
65
70
75
80

2.3632
2.5601
2.7569
2.9538
3.1506

2.3627
2.5596
2.7564
2.9533
3.1501

35
40
45
50
55

317
318
319
320
321

85
90
95
100
105

3.3476
3.5444
3.7413
3.9381
4.1353

3.3470
3.5438
3.7407
3.9375
4.1344

332
334
336
338
340

160
170
180
190
200

6.3012
6.6949
7.0886
7.4827
7.8764

6.3003
6.6940
7.0877
7.4815
7.8752

322
324
326
328
330

110
120
130
140
150

4.3321
4.7258
5.1197
5.5134
5.9075

4.3312
4.7249
5.1187
5.5124
5.9066

housing
diameter (in.)
max.
min.

42
47
52
62
72

1.6541
1.8510
2.0479
2.4416
2.8353

1.6535
1.8504
2.0472
2.4409
2.8346

130
140
150
160
170

5.1191
5.5128
5.9065
6.3002
6.6939

5.1181
5.5118
5.9055
6.2992
6.6929

240
260
280
300
320
340
360
380
400
420

3.1503
3.5442
3.9379
4.3316
4.7253

7.0876
7.4814
7.8751
8.4657
8.8594

9.4499
10.2375
11.0249
11.8123
12.5998
13.3872
14.1746
14.9620
15.7494
16.5370

3.1496
3.5433
3.9370
4.3307
4.7244

7.0866
7.4803
7.8740
8.4646
8.8583

9.4488
10.2362
11.0236
11.8110
12.5984
13.3858
14.1732
14.9606
15.7480
16.5354

Note: Diameters shown are based on normal loads, operating temperatures, and
current industry fitting practices. See SKF Bearing Installation and Maintenance Guide
(#140-710) for specific tolerance classes and corresponding fits.
13

Shoulder dimensions for shafts and housings


Deep groove ball bearings
6200 series
d

Bearing

mm

6205
6206
6207
6208
6209

25
30
35
40
45

6200
6201
6202
6203
6204

6210
6211
6212
6213
6214
6215
6216
6217
6218
6219

shaft shoulder
da
da
min.
max.
in
in

10
12
15
17
20

0.551
0.630
0.748
0.827
0.984

0.571
0.650
0.768
0.847
1.004

50
55
60
65
70

2.224
2.480
2.677
2.874
3.071

75
80
85
90
95

1.181
1.378
1.634
1.831
2.028

3.268
3.504
3.701
3.898
4.173

mm

1.024
1.102
1.220
1.417
1.654

0.984
1.062
1.180
1.377
1.614

0.024
0.024
0.024
0.024
0.039

2.244
2.500
2.697
2.894
3.091

90
100
110
120
125

3.287
3.622
4.016
4.409
4.606

3.247
3.582
3.976
4.369
4.566

0.039
0.059
0.059
0.059
0.059

1.201
1.398
1.654
1.851
2.048

3.288
3.524
3.721
3.918
4.193

52
62
72
80
85

130
140
150
160
170

100
105
110
120
130

4.370
4.567
4.764
5.157
5.630

4.410
4.607
4.804
5.197
5.670

180
190
200
215
230

6238
6240

190
200

8.110
8.504

8.150
8.544

340
360

14

140
150
160
170
180

6.024
6.417
6.811
7.323
7.717

max.
in

30
32
35
40
47

6220
6221
6222
6224
6226
6228
6230
6232
6234
6236

housing shoulder
Da
Da
max.
min
in
in

shaft &
housing
corner

6.064
6.457
6.851
7.363
7.757

250
270
290
310
320

1.850
2.244
2.579
2.894
3.091

4.803
5.157
5.551
5.945
6.260

6.654
7.047
7.441
8.031
8.543

9.331
10.118
10.906
11.575
11.969
12.756
13.543

1.810
2.204
2.539
2.854
3.051

4.763
5.117
5.511
5.905
6.220

0.039
0.039
0.039
0.039
0.039

0.059
0.079
0.079
0.079
0.079

6.574
6.967
7.361
7.951
8.463

0.079
0.079
0.079
0.079
0.098

12.676
13.463

0.118
0.118

9.251
10.038
10.826
11.695
11.889

0.098
0.098
0.098
0.118
0.118

Shoulder dimensions for shafts and housings


Deep groove ball bearings
6300 series
d

Bearing

mm

6305
6306
6307
6308
6309

25
30
35
40
45

6300
6301
6302
6303
6304

shaft shoulder
da
da
min.
max.
in
in

10
12
15
17
20

0.551
0.669
0.787
0.866
1.043

0.571
0.689
0.807
0.886
1.063

50
55
60
65
70

2.323
2.520
2.795
2.992
3.189

6320
6321
6322
6324
6326

100
105
110
120
130

4.449
4.646
4.843
5.236
5.748

6338
6340

190
200

6310
6311
6312
6313
6314
6315
6316
6317
6318
6319

6328
6330
6332
6334
6336

75
80
85
90
95

140
150
160
170
180

1.240
1.437
1.693
1.890
2.087

3.386
3.583
3.858
4.055
4.252

6.142
6.535
6.929
7.323
7.717
8.268
8.661

mm

housing shoulder
Da
Da
max.
min
in
in

shaft &
housing
corner
max.
in

35
37
42
47
52

1.220
1.260
1.457
1.654
1.791

1.180
1.220
1.417
1.614
1.751

0.024
0.039
0.039
0.039
0.039

2.343
2.540
2.815
3.012
3.209

110
120
130
140
150

3.976
4.370
4.685
5.079
5.472

3.936
4.330
4.645
5.039
5.432

0.079
0.079
0.079
0.079
0.079

4.489
4.686
4.883
5.276
5.788

215
225
240
260
280

7.953
8.346
8.937
9.724
10.394

7.873
8.266
8.857
9.644
10.314

0.098
0.098
0.098
0.098
0.118

1.260
1.457
1.713
1.910
2.107

3.406
3.603
3.868
4.075
4.272

6.182
6.575
6.969
7.363
7.757
8.308
8.701

62
72
82
90
100

160
170
180
190
200

300
320
340
360
380

400
420

2.185
2.579
2.835
3.228
3.622

5.866
6.260
6.575
6.969
7.362

11.181
11.969
12.756
13.543
14.331

14.961
15.748

2.135
2.539
2.795
3.188
3.582

5.826
6.220
6.495
6.889
7.282

11.101
11.889
12.676
13.463
14.251

14.881
15.668

0.039
0.039
0.059
0.059
0.059

0.079
0.079
0.098
0.098
0.098

0.118
0.118
0.118
0.118
0.118

0.157
0.157
15

Minimum radial load requirements


Cylindrical roller bearings
200 EC series

Bearing

204
205
206
207
208

minimum radial load required @


900 rpm
1800 rpm
3600 rpm

24 lb.
32
45
62
76

25 lb.
33
48
65
83

27 lb.
36
52
72
93

209
210
211
212
213

92
108
132
160
183

99
116
143
174
211

112
131
164
202
248

219
220
221
222
224

383
429
514
572
681

463
522
588
658
796

568
648
735

214
215
216
217
218

226
228
230
232
234
236
238
240

204
225
261
299
339

797
948
1117
1305
1485
1646
1872
2117

235
261
307
355
405

280
310
368
429
494

938
1126
1340
1585
1803
2025
2321
2646

Note: Minimum radial loads are necessary for satisfactory rolling bearing operation.
This is particularly true for roller bearings running at high speeds, where inertia forces
and friction from the lubricant may cause damaging sliding rather than
rollingmovements between the rollers and raceways.
16

Minimum radial load requirements


Cylindrical roller bearings
300 EC series

Bearing

304
305
306
307
308

minimum radial load required @


900 rpm
1800 rpm
3600 rpm

28 lb.
41
56
72
79

29 lb.
43
59
76
84

309
310
311
312
313

115
143
197
216
240

124
156
216
239
266

319
320
321
322
324

524
603
670
764
914

606
704
788
907
1097

314
315
316
317
318

326
328
330
332
334
336
338
340

280
322
367
415
467

1084
1248
1454
1688
1924
2117
2468
2676

314
364
417
475
537

31 lb.
46
65
84
95

141
182
254
285
320
382
448
517
593
678

1316
1515
1790
2110
2426
2646

Note: Minimum radial loads are necessary for satisfactory rolling bearing operation.
This is particularly true for roller bearings running at high speeds, where inertia forces
and friction from the lubricant may cause damaging sliding rather than
rollingmovements between the rollers and raceways.
17

Grease relube recommendation


Deep groove ball bearings
6200 series
Bearing

quantity

6204
6205
6206
6207
6208

.10 oz.
.12 oz.
.15 oz.
.19 oz.
.23 oz.

20,000 hr
19,100
18,200
17,300
16,500

6214
6215
6216
6217
6218

.47 oz.
.50 oz.
.55 oz.
.65 oz.
.74 oz.

15,200
14,800
14,500
14,400
14,250

6209
6210
6211
6212
6213

6219
6220

.25 oz.
.28 oz.
.33 oz.
.38 oz.
.43 oz.

.84 oz.
.95 oz.

900 rpm

16,400
16,250
16,150
16,000
15,600

14,100
14,000

interval @
1800 rpm

14,000 hr
13,500
13,000
12,500
12,000
11,500
11,200
10,500
10,000
9,600
9,200
8,800
8,500
8.250
8,000
7,750
7,500

3600 rpm

12,200 hr
9,000
8,000
7,000
6,500
5,900
5,300
4,600
4,000
3,200

2,600
2,000
1,500
1,200
900
650

Note: The relubrication intervals shown are based on a good quality lithium based
grease at a maximum temperature of 160F. Reduce the interval by half for each
27F above 160F, or for vertical applications. (High temperature greases, like
polyurea, can operate for longer periods of time than those listed above.) Lubricate
more often in applications where there is a risk of heavy solid and chemical
contamination. Consult manufacturer or SKF application engineering for details.

LGHP 2 ball and roller bearing grease

LGHP 2 is a polyurea-based grease designed for use in electric motors. Unlike


many polyurea-based greases, which are inherently noisy during operation,
LGHP 2 meets strict SKF noise requirements. Each batch is blended and
selected for consistency and adherence to quietness standards. The grease is
also recommended for applications where long life is required.
With LGHP 2, users can often avoid compatibility problems when
relubricating bearings. LGHP 2 is the factory fill grease used in SKF
bearings under the designation GXN.
18

Grease relube recommendation


Deep groove ball bearings
6300 series
Bearing

quantity

6304
6305
6306
6307
6308

.12 oz.
.16 oz.
.21 oz.
.26 oz.
.32 oz.

6314
6315
6316
6317
6318

.81 oz.
.92 oz.
1.03 oz.
1.14 oz.
1.26 oz.

6309
6310
6311
6312
6313

6319
6320

.39 oz.
.46 oz.
.54 oz.
.63 oz.
.72 oz.

1.40 oz.
1.57 oz.

900 rpm

20,000 hr
19,100
18,200
17,300
16,500
16,400
16,250
16,150
16,000
15,600

15,200
14,800
14,500
14,400
14,250
14,100
14,000

interval @
1800 rpm

14,000 hr
13,500
13,000
12,500
12,000
11,500
11,200
10,500
10,000
9,600
9,200
8,800
8,500
8,250
8,000

3600 rpm

12,200 hr
9,000
8,000
7,000
6,500
5,900
5,300
4,600
4,000
3,200

2,600
2,000
1,500
1,200

7,750
7,500

Note: The relubrication intervals shown are based on a good quality lithium based
grease at a maximum temperature of 160F. Reduce the interval by half for each
27F above 160F, or for vertical applications. (High temperature greases, like
polyurea, can operate for longer periods of time than those listed above.) Lubricate
more often in applications where there is a risk of heavy solid and chemical
contamination. Consult manufacturer or SKF application engineering for details.
19

Grease relube recommendation


Cylindrical roller bearings
N, NJ, NU 200 EC series
Bearing

quantity

900 rpm

204
205
206
207
208

.10 oz.
.12 oz.
.15 oz.
.19 oz.
.23 oz.

15,000 hr
14,500
14,000
13,500
13,000

214
215
216
217
218

.47 oz.
.50 oz.
.55 oz.
.65 oz.
.74 oz.

10,500
10,250
10,000
9,500
9,000

209
210
211
212
213

219
220

.25 oz.
.28 oz.
.33 oz.
.38 oz.
.43 oz.

.84 oz.
.95 oz.

12,500
12,000
11,500
11,000
10,750

8,500
8,000

interval @
1800 rpm

10,000 hr
9,500
9,000
8,500
8,000
7,500
7,000
6,500
6,000
5,500
5,000
4,500
4,000
3,500
3,000
2,500
2,100

3600 rpm

5,000 hr
4,500
4,000
3,500
3,000
2,700
2,400
2,100
1,700
1,400
900
800
700
500
200

Note: The relubrication intervals shown are based on a good quality lithium based
grease at a maximum temperature of 160F. Reduce the interval by half for each
27F above 160F, or for vertical applications. (High temperature greases, can
operate for longer periods of time than those listed above.) Lubricate more often in
applications where there is a risk of heavy solid and chemical contamination. Consult
manufacturer or SKF application engineering for details.
20

Grease relube recommendation


Cylindrical roller bearings
N, NJ, NU 300 EC series
Bearing

quantity

304
305
306
307
308

.12 oz.
.16 oz.
.21 oz.
.26 oz.
.32 oz.

314
315
316
317
318

.81 oz.
.92 oz.
1.03 oz.
1.14 oz.
1.26 oz.

309
310
311
312
313

319
320

.39 oz.
.46 oz.
.54 oz.
.63 oz.
.72 oz.

1.40 oz.
1.57 oz.

900 rpm

15,000 hr
14,500
14,000
13,500
13,000
12,500
12,000
11,500
11,000
10,750

10,500
10,250
10,000
9,500
9,000
8,500
8,000

interval @
1800 rpm

10,000 hr
9,500
9,000
8,500
8,000
7,500
7,000
6,500
6,000
5,500

5,000
4,500
4,000
3,500
3,000

3600 rpm

5,000 hr
4,500
4,000
3,500
3,000
2,700
2,400
2,100
1,700
1,400
900

2,500
2,100

Note: The relubrication intervals shown are based on a good quality lithium based
grease at a maximum temperature of 160F. Reduce the interval by half for each
27F above 160F, or for vertical applications. (High temperature greases, can
operate for longer periods of time than those listed above.) Lubricate more often in
applications where there is a risk of heavy solid and chemical contamination. Consult
manufacturer or SKF application engineering for details.
21

SKF vibration data @ 1000 rpm inner ring rotation


Deep groove ball bearings
6200 series
Bearing

MRC
MRC
MRC

MRC
MRC
MRC

MRC

MRC

6200
6201
6202
6203
6204
6205
6206
6206*
6207
6207*
6208
6209
6209*
6210
6211
6212
6213
6213*
6214
6214*
6215
6215*
6216
6216
6217
6217
6218
6219
6220
6221
6222
6224
6226
6228
6230
6232

inner ring
defect
freq.(Hz)

82.540
74.242
82.502
82.449
82.464
90.250
90.530
81.429
90.578
81.503
90.379
99.106
90.633
98.452
98.697
98.119
107.348
98.733
107.338
98.259
107.284
98.334
115.633
98.367
107.082
97.970
107.345
98.309
98.452
98.581
98.696
88.505
88.229
96.902
105.526
114.111

*Old design; no longer produced


22

outer ring
defect
freq.(Hz)

50.793
42.424
50.831
50.884
50.870
59.750
59.470
51.904
59.422
51.831
59.621
67.560
59.367
68.214
67.970
68.548
75.986
67.934
75.995
68.408
76.049
68.333
84.367
68.300
76.251
68.696
75.988
68.357
68.214
68.086
67.970
61.495
61.771
69.765
77.808
85.889

cage
train
freq.(Hz)

6.349
6.061
6.354
6.361
6.359
6.639
6.608
6.488
6.602
6.479
6.625
6.756
6.596
6.821
6.797
6.855
6.908
6.793
6.909
6.841
6.914
6.833
7.031
6.830
6.932
6.870
6.908
6.836
6.821
6.809
6.797
6.833
6.863
6.976
7.073
7.157

ball
defect
freq.(Hz)

66.030
56.566
66.208
66.456
66.388
78.580
77.039
71.575
76.782
71.183
77.863
84.900
76.488
88.840
87.330
90.980
94.577
87.111
94.637
90.069
94.986
89.590
104.007
89.381
96.304
91.962
94.594
89.745
88.840
88.040
87.333
89.555
91.548
99.649
107.716
115.758

SKF vibration data @ 1000 rpm inner ring rotation


Deep groove ball bearings
6300 series
Bearing

6300
6301
6302
6303
6304
6305
6306
6307
MRC 6307*
6308
6309
MRC 6309*
6310
6311
6312
6313
6314
6315
6316
6317
6318
6319
6320
6321
6322
6324
6326
6328
6330

inner ring
defect
freq.(Hz)

66.081
66.204
74.472
74.247
73.767
73.755
82.440
82.307
73.632
82.134
82.722
73.025
82.542
82.391
82.267
82.153
82.061
81.980
81.909
81.842
81.786
81.736
82.121
82.061
82.392
81.151
81.122
81.100
90.201

outer ring
defect
freq.(Hz)

33.919
33.796
42.195
42.419
42.899
42.912
50.894
51.026
43.035
51.199
50.611
43.641
50.792
50.942
51.067
51.180
51.273
51.353
51.424
51.492
51.548
51.598
51.213
51.273
50.941
52.182
52.211
52.233
59.799

cage
train
freq.(Hz)

5.653
5.633
6.028
6.060
6.128
6.130
6.362
6.378
6.148
6.400
6.326
6.234
6.349
6.368
6.383
6.389
6.409
6.419
6.428
6.436
6.443
6.450
6.402
6.409
6.368
6.523
6.526
6.529
6.644

ball
defect
freq.(Hz)

46.460
46.026
55.633
56.545
58.582
58.637
66.500
67.130
59.179
67.967
65.192
61.976
66.023
66.731
67.325
67.877
68.330
68.729
69.084
69.427
69.711
69.968
68.035
68.330
66.724
73.091
73.252
73.374
78.853

*Old design; no longer produced


23

SKF vibration data @ 1000 rpm inner ring rotation


Cylindrical roller bearings
N, NJ, NU 200 EC series
Bearing

202
203
204
205
206

111.996
112.500
111.887
129.167
129.301

212
213
214
215
216

155.039
154.724
163.240
171.739
171.563

207
208
209
210
211

217
218
219
220
222
224
226
228
230
232

24

inner ring
defect
freq.(Hz)

outer ring
defect
freq.(Hz)

71.337
70.833
71.446
87.500
87.366

138.272
137.879
145.992
154.137
163.462

95.062
95.455
104.008
112.530
119.872

163.186
163.029
163.951
163.771
163.392

120.148
120.304
119.382
119.563
119.941

163.397
163.522
180.838
180.739
180.653

111.628
111.943
120.093
128.261
128.437

119.936
119.812
135.829
136.928
136.013

cage
train
freq.(Hz)

6.485
6.439
6.495
6.731
6.720

roller
defect
freq.(Hz)

71.455
69.545
71.879
83.462
82.885

6.790
6.818
6.934
7.033
7.051

86.914
88.636
96.443
104.218
105.769

7.068
7.077
7.022
7.033
7.055

107.191
108.013
103.331
104.218
106.125

6.977
6.996
7.064
7.126
7.135

7.055
7.048
7.149
7.154
7.159

99.668
101.215
106.906
112.585
113.542

106.097
105.465
114.893
115.419
115.880

SKF vibration data @ 1000 rpm inner ring rotation


Cylindrical roller bearings
N, NJ, NU 300 EC series
Bearing

inner ring
defect
freq.(Hz)

302
303
304
305
306

94.737
104.037
103.881
112.500
121.359

312
313
314
315
316

129.774
130.314
129.805
130.182
129.828

307
308
309
310
311

317
318
319
320
322
324
326
328
330
332

120.619
121.212
130.442
129.733
130.367

139.303
129.770
138.517
130.068
139.077
129.774
139.211
138.739
138.725
138.889

outer ring
defect
freq.(Hz)

55.263
62.629
62.785
70.833
78.641
79.381
78.788
86.224
86.934
86.299
86.892
86.353
86.862
86.485
86.839

94.030
86.896
94.816
86.599
94.256
86.892
94.122
94.595
94.608
94.444

cage
train
freq.(Hz)

roller
defect
freq.(Hz)

6.140
6.263
6.279
6.439
6.553

58.947
62.943
63.483
69.545
74.470

6.684
6.643
6.682
6.653
6.680

80.912
78.761
80.788
79.278
80.693

6.615
6.566
6.633
6.687
6.638

6.716
6.684
6.773
6.661
6.733
6.684
6.723
6.757
6.758
6.746

77.397
75.036
78.265
81.083
78.555

82.664
80.928
85.867
79.729
83.563

80.912
83.029
84.942
84.997
84.325

25

ABMAdSKF
Product number comparison
90

BC

03

PP

1.

2.

SKF

90

XX18

Bore diameter

Bearing type
BC
BL
BN
BA
BT

6XXX
XXX
7XXX CD
7XXX CC
7XXX ACD
7XXX B

00
02
03
04

X0XX
X2XX
X3XX
X4XX

X
J
Y, K
M

J
Y
M

X
P
E
RR
UU
TT

Z
RS,RS1,RSH
DB
DF
DT

3.

Dimension series

4.

Cage type

5.

26

ABMA

10

18

2Z

symbols

C3
4

description

ABMA/5 = SKF
exc. 17 = XX03
15 = XX02
12 = XX01
10 = XX00
Conrad
maximum capacity
angular contact (15)
angular contact (12)
angular contact (25)
angular contact (40)
extra light
light
medium
heavy
any type
pressed steel
pressed brass
machined brass

Seals/shields or duplex mounting

character separator
(PP 2Z, two shields)
(EE 2RS, two seals)
duplex back-to-back
duplex face-to-face
duplex tandem

GJN
10

ABMAdSKF
Product number comparison
90

BC

03

PP

6.

ABMA

SKF

N
A

N
NB

Snap ring and groove


G
C

7.

10

NR
NBR

Radial clearance/preload
0
1
2
3
4
5

18

2Z

symbols

C3
4

7
8
9

GA
GB
GC

0
6
5
4
2

P6
P5
P4
P9A

normal, ABEC1, ISO P7


ABEC 3, ISO P6
ABEC 5, ISO P5
ABEC 7, ISO P4
ABEC 9

X
A

X26
X27
X28

S0
S1

Lubricant

10. Special features

10

groove without ring


groove without ring on same
side as seal/shield
groove with ring
groove with ring on same
side as seal/shield
normal clearance
tighter than C2
tighter than normal
looser than normal
looser than C3
looser than C4

Tolerance class

description

C1
C2
C3
C4
C5

8.

GJN

light preload
medium preload
heavy preload

any slush or grease


refer to manufacturer
(consult SKF Engineering)
heat stabilized to 150 C
heat stabilized to 200 C

27

Comparative Viscosity Classifications


Viscosity equivalents

Kinematic
viscosities
mm2/s at
40C
2000

Saybolt
viscosities

mm2/s at
100C

800

400

40

680

30

200

460

100
10
9
8
7

20

8A

140W
7

220

100
68

4
3

32
22

90W

40W
30W
80W

1000
800

85W

600
500
400
300

200
10W

75W

5W

100

70
10

60

50

5
4
3

40

3
35

2
32
Viscosities based on 95 VI single-grade oils.
ISO grades are specified at 40 C.
AGMA grades are specified at 100F.
SAE 75W, 80W, 85W, and 5 and 10W
specified at low temperature (below -17F = 0C).
Equivalent viscosities for 100F and 210F are shown.
SAE 90 to 250 and 20 to 50 specified at 210F (100C).
Comparison of various viscosity classification methods

NOTE: ISO mineral lubricants are recommended over SAE and AGMA
lubricants for centrifugal pump applications.

28

100
90
80
70
60
55
50
45

150

80

8
6

200

3000

1500
50W

20W
46

300

2000

15
10

SUS/210F

6000
5000
4000

30

8000

320

150

50
40

SUS/100F

250W
1000

20

60

SAE grades
gear oils

10000

50

300

80

SAE grades
crankcase oils

1500

600
500

AGMA grades

70
60

1000

ISO VG

40

Prolong your life


The life of your electric motors
with INSOCOAT bearings from SKF.

Conventional motor bearings get fried by


the electrical current passing through them.
The result is premature failure and high
maintenance costs. The SKF solution is
INSOCOAT inverter-duty bearings that
require no rework prior to mounting.

These drop-in replacement bearings feature


a coating of aluminum oxide on the inner or
outer ring, providing an insulating barrier
which prevents electrical current from
causing microscopic melting of the bearing.
In addition, INSOCOAT bearings are treated
with a sealant that resists humid
environments, heat and chemicals.

INSOCOAT bearings are 100% performance


tested to 1,000 V DC with a minimum ohmic
resistance of 50 M and available for shaft
diameters up to 155 mm.

SKF USA Inc.


www.skfusa.com

Complete and return this postage-paid card to


schedule a meeting with SKF and to receive a copy
of the 116-page hard-cover Electric Motor Handbook.

E-mail: ______________________________________________________________

Phone: ______________________ Fax: __________________________________

______________________________________________________________________

Address: ______________________________________________________________

Company: ____________________________________________________________

Title: ________________________________________________________________

Name: ________________________________________________________________

To get a copy of the 116-page, hard-cover, Electric Motor


Handbook schedule a meeting with SKF by completing and
returning this postage paid card.

Complete and return this postage-paid card to


schedule a meeting with SKF and to receive a copy
of the 116-page hard-cover Electric Motor Handbook.
PERMIT NO. 13 KULPSVILLE, PA

SKF USA INC.


PO BOX 332
KULPSVILLE, PA 19443

POSTAGE WILL BE PAID BY ADDRESSEE

FIRST-CLASS MAIL

BUSINESS REPLY MAIL

NO POSTAGE
NECESSARY
IF MAILED
IN THE
UNITED STATES

SKF and INSOCOAT are registered trademarks


of SKF USA Inc.

The contents of this publication are the copyright of the


publisher and may not be reproduced (even extracts) unless
prior written permission is granted.
Every care has been taken to ensure the accuracy of the
information contained in this publication but no liability can
be accepted for any loss or damage whether direct, indirect
or consequential arising out of use of the information contained herein.
2000 SKF USA Inc.
Publication 140-430

(7.5M/AN 12/2005)Printed in U.S.A.

Version 11/2005

You might also like