You are on page 1of 3

KONFIG SWITCH Switch> Switch>ena Switch#conf t Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#int vlan1 Switch(config-if)#ip add 192.168.12.2 255.255.255.0 Switch(config-if)#no shut

KONFIGURASI ROUTER Router#ena Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname bandung bandung(config)#int fa0/0 bandung(config-if)#ip add 192.168.10.1 255.255.255.0 bandung(config-if)#no shut bandung(config-if)#int fa0/1 bandung(config-if)#ip add 192.168.11.1 255.255.255.0 bandung(config-if)#no shut bandung(config-if)#int serial0/0/0 bandung(config-if)#ip add 202.200.200.1 255.255.255.252 bandung(config-if)#clock rate 64000 bandung(config-if)#no shut

You might also like