Professional Documents
Culture Documents
page
Manpower ……………… 4
Our services will address just where and what need to be developed in order to fulfill the
oilfield requirements of the chosen standard level. The service rendered will be
specifically tailored for oilfield emergency and online repairs concerned and will deal in
depth with sophisticated techniques, principles and enhance the innovative
maintenance development research both for Oil & Gas and Industrial companies,
include:
Assisting technical for all oilfield emergency and on-line repairs such as gas, air,
water, oil leakages.
A total solution for rehabilitation of severely corroded pipes and risers with
composites technology.
Perform Industrial Safety Cleanings, our services non conductive, non flammable,
quick evaporating, non corrosive, and offers high dielectric strength. The materials
do not leave any sticky, powdery, oil residues on the surface, CFC free,
environmental friendly product has strong degreasing & cleaning action and is
safe on well bonded paint and insulation varnishes. Prevents short circuiting and
leakages. Cuts down fire hazards in heavy duty cable and wiring system by
"online" cleaning of oily cables.
Metal repairs product, our services include general repairs or reclamations of
metal parts
Tank Cleaning and Sludge Treatment, provides in vessels, tank cleanings and
sludge treatment technology.
Corrosion prevention and protective coatings, protection & repair of various
industrial equipments against corrosion, erosion and chemical attack
The fascinating idea for the magic pipe cleaning systems with high pressure water
technology, etc
Under RUSTSHIELD, has already set the credibility and capability will actively engage in
developing solutions for controlling the corporate production impact.
Finally, we have clearly defined our objectives and we feel that we are well positioned
how to create reasonably security and control in often unpredictable business
environment
RUSTSHIELD Indonesia, pt, is RUSTSHIELD holds the minimize the risk from
a Indonesian company, exclusive licencing agent corrosion under
mainly focus on the from Merit Insulation Systems insulation (CUI)
development , application Sdn Bhd of Malaysia to sell
and construction of non and apply FibaRoll materials
metallic UV cured glass fiber and systems. Rustshield offers
reinforced plastic (UVGRP) GRP insulation protection
insulation protection and with improved physical
related services primarily for protection and weather
the power, oil and gas proofing necessary to
industry. improve the life of the
insulation system and
Consolidating our resources, distribution network and expertise, we are poised to handle
maintenance, repair, long term supply contracts, oilfield emergency and online repair,
and also urgent requirements. Our business is to add value and to solve your problems.
Team Work:
We serve on
line repairs for
your
emergency
case
As a socially responsible employer and corporate citizen, the health, safety and
well being of every employee and environment around the area where we
operate are important to the success of our business. RUSTSHIELD takes great
pride in maintaining the highest standards of HSEMS without any compromise. We
strongly believe that all mishaps are avoidable and hence
are continuously engaged at all levels to attain our goal A delivery of quality and
towards total excellence through continual improvement. business excellence
Our quality products are sourced globally and every item has
been carefully selected to meet the most stringent requirement for Our policy is introducing
the oil & gas, chemical and petrochemical, energy and new technique, adopting
infrastructure, marine and other industry. new skills, developing new
products, discovering new
field, guiding by market and
focusing on quality
a pre-fabricated fiber glass lining system
RUST FIBERWRAPP,
a hand lay-up fiber glass lining system
RUST FIBERWRAPP hand lay-up applies is constructed with polyester or vinyl ester resin
and reinforced layer that composed of chopped strand mat for the top corrosion layer
resistant.
In the laminate process can be cured with catalyst and promoter system.
RUST FIBERWRAPP lining provides well protection against leak caused by corrosion &
abrasive.
There can many molding methods to produce corrosion resistant FRP’s and in general,
following laminate composition is recommended:
Chemical liquid
Top corrosion resistant layer
Intermediate corrosion resistant layer
E
Reinforced layer
Outer layer
Unfilled resin is normally used for the typical laminate composition. For the top corrosion
resistant layer, a glass surface mat is used to form t thickness of 0.25 to 0.5 mm. The
intermediate corrosion resistant layer is composed of 2 plies of E glass chopped strand
mat (450g/m2) to form a thickness of 2.5 mm or more.
The reinforced layer is composed of roving cloths and chopped strand mats which are
alternatively laminated to obtain a specified thickness. The outer layer is to obtain a
good appearance and to protect from external corrosion, which is composed of 1 ply of
C glass
Applications:
Pipe & Pipeline
Pile & Riser
Steel storage & processing tank
Water treatment, waste treatment concrete basin & chemical pond
Industrial plant floor
Interior flooring
Water proofing at the roof flooring building
Bolt & Nut Cover was produced using silicon material based which can endure heat
temperature up to 105o Celcius and is excellent protection against ozone and oxidation
within the marine environment.
The epoxy essentially consists of a load bearing epoxy resin filler mixed
with load bearing polyamines. The physical properties allow its use in
applications requiring high load bearing strength and excellent
adhesion under adverse application conditions.
The product has a long working life and a low exothermic reaction (i.e. minimal
heat generation during cure) that make it suitable for applications where a
relatively large mass of adhesive is employed.
The coating is damaged by abrasion between the pipe and its support caused by
movement of the pipe during operation. Rainwater readily collects in this area to
act as the electrolyte.
Advantages:
protection pipe from potential impacts for damage while pipe laying
can used in pipe support areas in a wide range of situations including plants
and pipelines in hot, cold and humid
conditions in repair and construction.
simple to apply needing no special
equipment or tools and after the
appropriate training can be applied by a
wide range of contractors.
It provides a long working time for application, with no offensive odor. RUST STABILIZER may
also be thickened and used as a prime or finish coat depending upon the project
requirements.
ADVANTAGES:
• Good high temperature properties
• Good low temperature properties
• Long working time
• High elongation
• Ambient cure
• 100% solvent-free
ULTRATEC Lp MARINE,
For ultimate surface finish
Major Features:
Outstanding cosmetic surface appearance and long term UV protection
Maximum gloss retention wit minimal surface discoloration following outdoor
exposure and weathering.
Gelcoat shows exceptional flow, leveling and air release properties allowing easy
application and control of film thickness, with minimal porosity
Ultra resistant to osmotic blistering
Low profile cosmetic, minimal surface distortion
Low styrene emission structural laminating resin reduces workshop VOC emissions
High performance marine composites
KORROGUARD -GF
Two part 100% Solid Glass flake filled high performance epoxy coating systems.
The tortuous path formed by well aligned glass flakes increases the distance that
the corrosive ions need to travel through permeable binder to reach to the base
metal.
Extremely low permeability
Low lateral shrinkage during cure.
Co-efficient of thermal expansion is similar to low carbon steel.
Extremely good resistance to under cutting
Relatively high abrasion resistance
Good resistance to cathodic disbanding
Good chemical resistance.
Temperature resistance up to 110oC
Used for cooling water, pump internal, tank internal lining, steel structure, external
pipelines etc.
KORROGUARD TM
Recommended for outstanding resistance to moisture,
water, acid, alkalies, oil and corrosive media.
A specially developed anti corrosive 100% solids, high
performance coating system.
Provides a durable smooth finish with excellent
corrosion resistance.
Meets FDA guideline (Non -Toxicity certified)
Can also be used as protective coating on equipments
were food or drinking water is coming in contact.
Used for steel structures and equipment working under severe corrosive
environment
Can also be used as floor coatings against alkali/mild acid spillages.
KORROGUARD - 10
KORROGUARD - UW
MULTIGUARD
MULTIGUARD - PU
CHEMGUARD
CHEMGUARD -GF
Recommended for petrochemical, pulp & paper, offshore,
ballast tank, hull , high pressure vessel and other harsh
environment.
Three parts high-built heavy-duty Chemical resistant
multifunctional Modified Novolac Vinyl ester Epoxy Glass
Flake system, reinforced with Screened Glass flake
Provides an impermeable & Chemical resistance barrier,
suitable for Steel and Concrete surface.
Extremely good chemical resistance
Resist temp. Up to 107 oC.
Used for condenser water boxes & tube sheets, acid pumps, gas separator vessels
& other acid handling medias.
Fabricated specially for marine pile; riser, jetty pile, bridge pile etc,
protection and rehabilitation. They cater for wide range of sizes and wall
thickness.
They are supplied complete with spacers that ensure a uniform grout
thickness throughout the length of jacket.
Corroded
pipe/pile/riser
Final Result
Jacked Pile
IMPELLER
Product Description
1 Part Number
2 Product Code No. RFP-001-11IM-00XXX
3 Product Origin Indonesia
4 Brand Name OSI-R
5 Environment Safe
Material Ferro Casting
6
Different Size Customized PILONA
GUARDER ROD
Type : 01. Slot Type
Product Description
1 Part Number
2 Product Code No. RFP-00133-GR-01XXX
3 Product Origin Indonesia
4 Brand Name OSI-R
5 Standard Colour Black
Materials Hard Nylon
2 ½” x ¾”, PERTAMINA
6 Standard Size 2 ½” x 7/8”
For tubing 3”
Normal working temp. max 400 oF. Excellent resistant to most of petroleum
1 Characteristic
product, fuels & oil, H2S, CO2 and broad balance of high & low temperature.
2 Environment All product environmentally safe
3 Different Size Will be customized
GLAND PACKING
Product Description
1 Part Number
2 Product Code No. RFP-00122-GP-00XXX
3 Product Origin Indonesia
4 Brand Name OSI-R
5 Standard Colour Black
Material Nitrile Butadiene
6 Standard Hardness Shore 75 - 85
RUBBER PISTON
SWABBING RUBBER
Type : 01. Arrange Cup Type
Product Description
1 Part Number
2 Product Code No. RFP-00122-SR-01XXX
3 Substitute for MV Type of Guiberson
4 Product Origin Indonesia
5 Brand Name OSI-R
6 Standard Colour Black
7 Material Nitrile Butadiene
Standard Size 2 7/8” Tubing
8
Different Size Customized
9 Standard Hardness Shore 75 – 85
10 Standard Core Pipe Aluminium