Professional Documents
Culture Documents
Mobile Computer
CK70, CK70NI, CK71, CK71NI, CN70, CN70NI, CN70e, CN70eNI
Users Manual
Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. 2011 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
ii
Description of Change Revised to add information on nonincendive (NI) versions of the computer, provisioning the computer, the new ScanDiagnostics application, and how to use the 70 Series as a USB mass storage device. Also corrected the cold boot procedure and removed the compass.
iii
iv
Contents
Contents
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Send Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Service Location Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
..................................................... 1
About the 70 Series Mobile Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Whats New in This Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Overview of 70 Series Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 70 Series Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About Language Provisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 About the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Changing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 About Battery Life and Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 About the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Entering Characters on the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Entering Characters on the Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Entering Characters on the CK70 and CK71 Keypads . . . . . . . . . . . . . . . . . . . . . . . 23 About the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 About the Intermec Dashboard Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Configuring the Screen Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Reading Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Contents Inserting a microSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Installing a microSD Card in a CN70 or CN70e . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Installing a microSD Card in a CK70 or CK71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Transferring Files To and From Your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Using Microsoft ActiveSync to Transfer Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Using the Computer as a Mass Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
. . . . . 37
About the User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 About the Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Interacting With the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Title Bar Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Aligning the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 About Intermec Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Applications Available on the Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Applications You Can Download to the Mobile Computer. . . . . . . . . . . . . . . . . . . 45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
About the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Activating the UMTS Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Activating the CDMA Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Turning the Phone On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Making a Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Making an Emergency Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
About the Color Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Taking a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Recording a Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Saving Pictures and Videos to an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
vi
Contents
5 Using GPS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
About the Integrated GPS on Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Using the GPSID Installed on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Improving GPS Performance on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
How to Configure the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Using Intermec Settings on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Starting Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 About the Structure of Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Navigating in Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Configuring Profile Settings With Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . 70 Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Hiding Menu Items in Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Using Intermec Settings Remotely With SmartSystems Foundation . . . . . . . . . . . . . . . . . . 72 About Network Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Configuring 802.11a/b/g/n (Wi-Fi) Radio Communications . . . . . . . . . . . . . . . . . 72 Configuring Ethernet Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Configuring Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 About Serial and USB Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Creating an ISP Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Creating a VPN Server Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 About Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Choosing Between Microsoft and Funk Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Loading a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Managing the Computer in Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Managing the Computer Using SmartSystems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Managing the Computer Using Third-Party Software . . . . . . . . . . . . . . . . . . . . . . . 95 Developing and Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Packaging Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Choosing a Target Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Installing Applications Using SmartSystems Foundation Console. . . . . . . . . . . . 96 70 Series Mobile Computer Users Manual vii
Contents Installing Applications Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . 97 Installing Applications Using a Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Launching Applications Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Updating the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Updating Multiple Computers Using SmartSystems Console . . . . . . . . . . . . . . . . 99 Updating Individual Mobile Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
. . . . . . . . . . . . . . . . . . 103
About the Intermec Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 Troubleshooting Your Mobile Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Troubleshooting the Wi-Fi Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Troubleshooting 802.1x Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 Checking 802.11 Network Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 Troubleshooting Reading Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109 Using ScanDiagnostic to Troubleshoot the Scanner. . . . . . . . . . . . . . . . . . . . . . . .110 Troubleshooting Operating the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 Calling Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Finding Your Configuration Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Finding Your Operating System Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 Rebooting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 Cold Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 Clean Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 Cleaning the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Physical and Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 CN70 Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 CN70e Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 CK70 Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 CK71 Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 Power and Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 70 Series Non-Incendive Computer Specifications . . . . . . . . . . . . . . . . . . . . . . . . .119 Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 viii 70 Series Mobile Computer Users Manual
Contents Back Accessory Interface Pin-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Touch Screen Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Standard Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Regulatory Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Bar Code Symbologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Imager Reading Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Standard Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 CN70 Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 CN70e Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 CK70 Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149 CK71 Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Radio Configuration Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 2D Configuration Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 1D Configuration Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
ix
Contents
Safety Information
Your safety is extremely important. Read and follow cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety cautions. This section explains how to identify and understand cautions and notes that are in this document. A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances.
Web Support
Visit the Intermec web site at www.intermec.com to download our current manuals (in PDF).
70 Series Mobile Computer Users Manual xi
Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product.
Send Feedback
Your feedback is crucial to the continual improvement of our documentation. To provide feedback about this manual, please contact the Intermec Technical Communications department directly at TechnicalCommunications@intermec.com.
Telephone Support
In the U.S.A. and Canada, call 1-800-755-5505. Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click About Us > Contact Us.
xii
Related Documents
This is a list of related Intermec documents. Intermec Settings Command Reference Manual Intermec Developer Library (IDL) Resource Kit Developers Guide
The Intermec web site at www.intermec.com contains our documents (as PDF files) that you can download for free. To download documents 1 Visit the Intermec web site at www.intermec.com. 2 Click the Products tab. 3 Using the Products menu, navigate to your product page. For example, to find the CN70 computer product page, click Computers > Handheld Computers > CN70. 4 Click the Manuals tab. If your product does not have its own product page, click Support > Manuals. Use the Product Category field, the Product Family field, and the Product field to help you locate the documentation for your product.
xiii
Patent Information
Product is covered by one or more of the following patents: 4882476; 4894523; 4953113; 4961043; 4970379; 4988852; 5019699; 5021642; 5038024; 5081343; 5095197; 5144119; 5144121; 5182441; 5187355; 5187356; 5195183; 5216233; 5216550; 5195183; 5195183; 5218191; 5227614; 5233172; 5241488; 5243602; 5258606; 5278487; 5288985; 5308966; 5322991; 5331136; 5331580; 5342210; 5349678; 5359185; 5371858; 5373478; 5389770; 5397885; 5410141; 5414251; 5416463; 5442167; 5464972; 5468947; 5468950; 5477044; 5486689; 5488575; 5500516; 5502297; 5504367; 5508599; 5514858; 5530619; 5534684; 5536924; 5539191; 5541419; 5548108; 5550362; 5550364; 5565669; 5567925; 5568645; 5572007; 5576529; 5592512; 5594230; 5598007; 5608578; 5616909; 5619027; 5627360; 5640001; 5657317; 5659431; 5671436; 5672860; 5684290; 5719678; 5729003; 5742041; 5761219; 5764798; 5777308; 5777309; 5777310; 5786583; 5793604; 5798509; 5798513; 5804805; 5805807; 5811776; 5811777; 5818027; 5821523; 5828052; 5831819; 5834753; 5834749; 5837987; 5841121; 5842070; 5844222; 5854478; 5862267; 5869840; 5873070; 5877486; 5878395; 5883492; 5883493; 5886338; 5889386; 5892971; 5895906; 5898162; 5902987; 5902988; 5912452; 5923022; 5936224; 5949056; 5969321; 5969326; 5969328; 5979768; 5986435; 5987192; 5987499; 5992750; 6003775; 6012640; 6016960; 6018597; 6024289; 6034379; 6036093; 6039252; 6064763; 6075340; 6095422; 6097839; 6102289; 6102295; 6109528; 6119941; 6128414; 6138915; 6149061; 6149063; 6152370; 6155490; 6158661; 6164542; 6164545; 6173893; 6195053; 6234393; 6234395; 6244512; 6249008; 6328214; 6330975; 6345765; 6356949; 6367699; 6375075; 6375076; 6375344; 6431451; 6435411; 6484944; 6488209; 6497368; 6532152; 6538413; 6539422; 6621942; 6641046; 6681994; 6687403; 6688523; 6732930 There may be other U.S. and foreign patents pending.
xiv
1
Using the Computer
This chapter introduces the 70 Series Mobile Computers with Windows Embedded Handheld operating system. Use this chapter to learn about the basic features and functions of each computer, as well as the available accessories for it.
Scan button
Speaker port
Battery
IrDa port
Scan button
Battery
Battery
Green key status LED Shift key status LED (CK70 alphanumeric and CK71 function numeric)
Ready-to-Work Blue
Blinking ITE is running but not connected to the host. blue Battery Key Status Shift Green Orange Red See About Battery Status on page 13. The Green function key is enabled. The Orange function key is enabled. The Shift key is enabled.
70 Series Accessories
The 70 Series computer ships with a battery. All other accessories are sold and ordered separately. For help, contact your local Intermec sales representative. 70 Series Accessories
Accessory Audio Snap-On Adapter Back Accessory Interface Description Use the audio adapter to connect the computer to a headset. Use the back accessory interface to attach accessories such as the magstripe reader adapter to the CK70 and CK71. This battery provides main power to the CK70 and CK71. Use the magnetic stripe reader to be able to read magnetic cards with the CK70 and CK71 computer. This battery provides main power to the CN70 and CN70e. Use the magnetic stripe reader to be able to read magnetic cards with the CN70 and CN70e computer. Use the desktop stand to hold the 70 Series computer on your desk or a stable surface. Use this adapter to receive and send serial communications through a DEX/UCS connection. Use the desktop dock with the:
CK70/CK71 Battery CK70/CK71 Magstripe Reader Adapter CN70/CN70e Battery CN70/CN70e Magstripe Reader Snap-On Adapter Desktop Stand
Chapter 1 Using the Computer Accessory Ethernet Snap-On Adapter Description Use the Ethernet adapter to be able to connect the computer to an Ethernet network. You can order and install a replacement handstrap for the CN70, CN70e, and CK70/CK71. Each kit contains 5 handstraps. Use the holster to store the computer when you need your hands free. Use the RS-232 adapter to convert the connector on the bottom of the computer to a serial connector. Use the scan handle to provide better ergonomics to the computer for high-volume scanning applications.
Scan Handle
Tethered Stylus Replacement Kit You can order and install a replacement stylus. USB Snap-On Adapter Use this adapter to convert the bottom connector of the computer to a USB connector. Use the vehicle dock to provide power and hold your computer while you are using it in a vehicle. Use the vehicle holder to hold your computer while you are using it in a vehicle. Use the vehicle power adapter to provide power to the computer from your vehicle. Use this adapter to be able to use the Vocollect voice solution in your warehouse.
Vehicle Dock
Vehicle Holder
Make sure you select the correct language before you tap Provision. If you need to have the language provisioning changed, you will need to send your computer to an Intermec Global Repair Center.
10
4 Make sure the computer is in hibernate mode and that the screen has turned off. 5 Remove the battery.
11
On the CN70 or CN70e, push the battery release toward the bottom of the computer until the battery releases and then lift it away from the computer.
On the CK70 or CK71, push the battery release toward the top of the computer until the battery releases and then lift it away from the computer.
6 Insert the top end of a fully charged battery into the computer, and press down firmly on the bottom of the battery. Make sure that the battery release is fully engaged.
12
13
You can also use the battery status LED to see the charging status of your battery.
Battery status LED
Off
14
Use the computer and the Low Connect the computer to an external Battery status icon appears or the power source. Battery light comes on. Or, save your data and press the Power button and select Hibernate. After the computer turns off, remove the battery and insert a fully charged battery. Stop using the computer for 5 minutes or longer. Make sure that the low battery icon is not on the screen and the Battery LED is not on. Press the Power button and choose Suspend to suspend the computer.
Store the computer for more than If you are storing the computer for a few a day. days, like over the weekend, install a charged battery or connect the computer to a power source. If you are storing the computer for longer, remove and charge the battery, and then store both the battery and computer in a cool location. If you store the battery for several months, recharge the battery to keep it at peak performance. Store the battery outside the computer. Store the batteries in a charger.
15
Q
? &
E
/
T
4
Y
5
U
6
S Z
D X
Esc
F C
G
7
H
8
J
9
K M
Enter
V
sym
B
0
Space
1 4
Esc
Caps
2 5 8 0
ABC
3 6 9
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
Enter
Space
16
Q A
E D X
R F C
T G V
Y H B
U J N
I K M
O L
S Z
Space
Esc
1 4 7
2 5 8 0
3 6 9
E N T E R
F6
F7
F8
F9
F10
F1
F2
F3
F4
F5
1 4
Esc
Caps
2
GHI
ABC
3 6 9
DEF
5
PQRS
JKL
MNO
8 0
TUV
WXYZ
E N T E R
Space
17
The CK70 comes with either a large alpha or an alphanumeric keypad. The CK71 comes with either a numeric function keypad or an alphanumeric keypad. The computer has an ambient light sensor that detects low light and turns on the keypad backlight. By default, the keypad backlight is enabled in low light conditions. You can disable the keypad backlight to conserve power. Use Intermec Settings to configure the backlight. For help, see Using Intermec Settings on the Computer on page 64.
CK70 Large Alpha Keypad
Esc
Send
End
A
F1
B
F2
C
3
Enter
F3 sym
D
F4
E
F5
F
F6
Space
G
F7
H
F8
I
F9
J
< >
K
%
L
F10
M
(
N
)
O
@
P T
=
Q
\ [
R
]
S
+
U Y
Ctrl
V
Insert Delete
18
Alt
F6
Send
Esc
End
F1
F7
1
Insert
2 5 8 0
3
Delete
F2
F8
4 7
6 9
Enter
F3
F9
F4
F10
F5
F11 F12
Ctrl
F13
Space
F14 F15 F16
A
F17
B
F18
C
F19
D
F20
E
F21
F
F22
G
F23
H
F24
I O U
K Q W Z
L R X
M S
N T
P
V Y
19
Insert
Fld- Fld+
View
SysRq
Return
Enter
View
Page
Fld Exit
A PrvScr B
Roll
C NxtScr
7
D Delete E
8
Roll
9
F
Clear Reset
4
G
PA1
5
H
PA2
6
I
PA3
Esc
1
Home
2
J
Attn
3
K N
F15
Space
Return
0
L
F13
Enter
O
F16
F14
F1
P
F17
F2
Q
F18
F3
R
F19
F4
S
F20
F5
T
F21
F6
U
F22
F7
V
F23
F8
W
F24
F9
Z
Alt
20
View
Page
Alt Reset
Fld Exit
F6 PA1 PrvScr
Roll NxtScr
Esc
F1 F2
F8 PA3 Fld-
7 4
Fld+
8
Roll
9
Delete Clear
F7 PA2 Insert
5
Help
6 3
Return
F3
F9 Autolog
2 0
F4
F10 EEOF
Enter
Ctrl
F12 F13
F5
F11 Attn
Space
F14 Dup F15 Erase F16 Find
A G M S
B H N T
C I O U
D J
Print
E K
SysRq
F L
Remove
F21Keypd F22
P
V
?
Q W
Select
R X
21
To only type characters or access functions on the overlay: Press b twice to lock the orange modifier key to stay on, and then press the keys for the characters or functions. To type a single uppercase letter: Press y and then the letter key. To type all uppercase letters: Press y y to turn on Caps Lock, and then press the letter keys. You can still type orange modifier characters by pressing b and then the key for that character. To turn off Caps Lock, press y.
22
Note: If uppercase letters are enabled and you unlock the green modifier key, you may need to press c 1 to type lowercase letters.
23
Chapter 1 Using the Computer The Intermec Power Options Default Screen
Use the following table to understand the Intermec Power Options. Note: The Real Time Clock (RTC) will persist through all of the power options as long as it receives power from the Real Time Clock battery. Intermec Power Options
Option Hibernate (battery swap) Description High power saving mode. Use this setting only for swapping the battery. The computer saves the current system state, registry, and file system and then powers off all radios and internal devices. You can wake the computer by pressing the Power button or connecting the computer to external power. Medium power saving mode. The computer powers off all radios and internal devices not involved in saving the system state, but the phone stays on to receive calls. This option is the default setting. You can wake the computer by pressing the Power button, pulling the scanner trigger, receiving a call, scheduling an event such as an alarm, or by connecting external power. 70 Series Mobile Computer Users Manual
Suspend
24
Chapter 1 Using the Computer Option Reboot Description The computer does not save the current system state, but the registry and file systems are saved. The computer shuts down all running processes and restarts. The Power Options menu is cancelled. Lowest power saving mode. The screen turns off, but the phone, all radios, and internal devices stay on. Tap the screen to turn the screen back on. Very high power saving mode. The computer turns off everything. You must press Power or apply external power to restart the computer.
Shutdown
The Intermec Power Options screen is customizable. You can use Intermec Settings to determine which options are available to end users, the timeout until the default choice is selected, the default action if no option is selected, or to disable the Power Options screen. For more information on customizing the screen using Intermec Settings, see Using Intermec Settings on the Computer on page 64 or see the Intermec Settings Command Reference Manual.
To configure the screen backlight to turn off: 1 Tap Start > Settings > Power. 2 Tap Advanced on the horizontal scroll bar. 3 Select the screen power off settings for when the computer is on battery power or external power. To configure the screen brightness: 1 Tap Start > Settings > System > Backlight. 2 Adjust the slider to the desired brightness level. 3 Tap OK.
26
Note: You can also select the imager predefined mode in Profile Settings by tapping Start > Profile Settings > Scanning. 3 Point the imager window at the bar code label, and hold the computer steady a few inches from the label. 4 Press the Scan button. The laser pointer and illumination beam or frame appear.
70 Series Mobile Computer Users Manual 27
5 Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the illumination beam or frame covers the bar code you are trying to decode. When the computer successfully reads a bar code label, you hear a high beep, and the Good Read LED turns on briefly. 6 Release the Scan button.
28
3 Remove the two Phillips screws and open the card access door.
4 Slide the SIM card door to the left to unlock it and open the door.
29
5 Slide the microSD card door towards the top of the computer to unlock it and open the door.
7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Close the card access door and replace the two screws. 10 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged.
30
11 Reattach the handstrap. 12 Press the Power button. The computer cold boots.
31
4 Slide the SIM card door to the left to unlock it and open the door.
5 Slide the microSD card door towards the top of the computer to unlock it and open the door.
32
7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Replace the interface adapter cover and attach with the two screws removed in Step 2. 10 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 11 Reattach the handstrap. 12 Press the Power button. The computer cold boots.
33
34
35
36
2
Understanding the User Interface and Intermec Applications
Use this chapter to learn about the Windows Embedded Handheld user interface and how to interact with the screen. You can also use this chapter to learn about the Intermec applications on your computer, as well as additional Intermec applications you can download.
37
Tile bar
Use the Title bar icons to view the current status of information such as signal strength and battery power remaining. For more information on the Title bar icons, see Title Bar Status Icons on page 40.
38
A horizontal scroll bar appears when you tap an icon in the Title bar. This horizontal scroll bar makes it easy to access the applications associated with the Tile bar icons. The horizontal scroll bar also contains a magnifier which improves the touch experience by making parts of the screen large enough to tap with your finger. The horizontal scroll bar also replaces tabs within Windows screens and allows for easier navigation.
Clock & Alarms Screen With Horizontal Scroll Bar
Use the Tile bar to navigate between screens and within applications. The icons available on the Tile bar change depending on the application you are using.
Chapter 2 Understanding the User Interface and Intermec Applications Gesture Flick Pan Description Initiates scrolling in the direction (horizontal or vertical) the finger or stylus moves across the screen. Press and hold on the screen and then drag in any direction.
40
Chapter 2 Understanding the User Interface and Intermec Applications Icon Description An ActiveSync synchronization is in progress over USB. A UMTS network is available. Connecting to a UMTS network. A UMTS connection is active. A 3G+ network is available. An EDGE network is available. Connecting to an EDGE network. An EDGE connection is active. A GPRS network is available. Connecting to a GPRS network. A GPRS connection is active. An HSDPA network is available. Connecting to an HSDPA network. An HSDPA connection is active. Bluetooth is on. Wi-Fi is on but not connected, and no networks are detected. Wi-Fi is not connected to a network, and other networks are detected. Other wireless networks are detected. Connected to a wireless network.
41
Chapter 2 Understanding the User Interface and Intermec Applications Icon Description Synchronizing through a Wi-Fi connection. Connected to a wireless network, and other networks are detected. Information about a new wireless network is available. A network connection is active. A network connection is inactive. The phone has maximum signal strength. The phone has no signal. The phone capability is off. The phone has no service. The phone is searching for service. Data is being transferred. A voice call is in progress. A voice call is on hold. There is no SIM card present in the computer. The volume is off and the phone is set to vibrate. The volume is on. The volume is off. The battery has a full charge. The battery has a high charge.
42
Chapter 2 Understanding the User Interface and Intermec Applications Icon Description The battery has a medium charge. The battery has a low charge. The battery has a very low charge. The battery is attached to external power and is charging. No battery is installed in the computer. Call forwarding is on. Voice mail is off. GPS locator is off. GPS locator is on.
43
iGPS
Intermec Settings
ISpyWiFi
Profile Settings Use Profile Settings to easily configure the computer for a specific use. You can choose predefined values for the Camera, Power, and Scanning. To apply a profile setting:
44
Chapter 2 Understanding the User Interface and Intermec Applications Icon Application Description
ScanDiagnostic Use the ScanDiagnostic application to troubleshoot problems with the internal or external scanner. For more information, see Using ScanDiagnostic to Troubleshoot the Scanner on page 110. Wireless Center Use the Wireless Center to turn radios (Wi-Fi, Bluetooth, phone) on and off and configure settings for each radio. Wireless Printing Wireless Scanning Use the Wireless Printing application to connect to a Bluetooth printer. For more information, see Connecting to a Bluetooth Printer on page 76. Use the Wireless Scanning application to connect to a Bluetooth scanner. For more information, see Connecting to a Bluetooth Scanner on page 74.
About eMDI
Intermec Enhanced Mobile Document Imaging Application (eMDI) is a professional document capture application that enables you to capture images of full page documents (8.5 x 11 or A4 paper sizes) with the camera. You can transfer the images from your mobile computer to a PC or server. For more information, see the Intermec Enhanced Mobile Document Imaging User Guide. You can download and use eMDI for a 30-day evaluation period. After the evaluation period expires, you will need to purchase a license.
45
46
48
3
Using the Phone
You can use the phone feature to make and receive telephone calls, as well as transmit data through cellular wide-area networks (WANs).
49
50
3 On the CK70, remove the two screws and lift the card access door away from the computer.
4 Slide the SIM card door to the left to unlock it and open the door. 5 Slide the SIM card into the slot in the card access door.
6 Close the SIM card door and slide it to the right to lock it in place. 7 Close the card access door and replace the two screws.
51
8 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 9 Press the Power button. The computer cold boots.
The carrier will require the Electronic Serial Number (ESN) to start the activation process. You can find the ESN: on a label located in the upper right corner of the battery compartment. on the outside of the computer shipping box. The activation process is slightly different for each CDMA carrier. Your carrier sales contact and an Intermec representative can guide you through the process. After you supply the ESN to your carrier, they will respond with values that you must enter using the Windows Mobile Activation Wizard (if required). Some of the supported carriers do not require you to enter any values. The following table shows the carriers, the correct activation method to use, and the values that you need to activate your phone.
52
Master Subsidy Lock (MSL) or activation code MDN Mobile Station Identifier (MSID)
None. All parameters are automatically transferred wirelessly.
Verizon
After activation, the settings are permanently stored in the CDMA module. Changing the OS or SSPB loads will not affect any of the settings or activation parameters stored in the WAN modem.
53
54
4
Using the Camera
You can use the color camera to take pictures and record videos.
55
Taking a Picture
You can take photos in high, normal, or low quality, with image sizes up to 2048 x 1536 pixels. When you take a picture, the image is saved as a .jpg file and stored in the /My Documents/My Pictures folder. To take a picture: 1 Tap Start > Pictures & Videos. 2 Tap the Camera icon in the grid or the Camera button on the Tile bar, or press Enter. 3 Using the screen as a viewfinder, move the camera until you have the image you want to take a picture of. 4 Press Enter to take and save the picture. If you choose to save your pictures to Main memory, they are saved to permanent storage on your mobile computer.
56
Recording a Video
You need to switch to video mode to record video. When you record video, the video is saved as an .mp4 file and stored in the /My Documents/My Pictures folder. To switch to Video mode and record video: 1 Tap Start > Pictures & Videos. 2 Tap the Camera icon in the grid or the Camera button on the Tile bar, or press Enter. 3 Tap Menu > Video. 4 Using the screen as a viewfinder, move the video camera until you see the scene you want to video record. 5 Press Enter to start recording. 6 When you are done, tap Stop or press Enter to stop recording and save the video. If you choose to save your videos to Main memory, they are saved to permanent storage on the computer.
57
58
5
Using GPS
The 70 Series computer comes equipped with an integrated Global Positioning System (GPS) receiver if your computer has phone capability (WWAN radio). The GPS receiver can deliver standards-based National Marine Electronics Association (NMEA) data strings to GPS applications.
59
60
2 Select the COM port that you want your programs to use to get GPS data from your computer. 3 Tap Access in the horizontal scroll bar and select the Manage GPS automatically check box.
4 Tap OK.
61
In MS Assisted mode, the computer can determine position without receiving GPS signals directly from satellites; instead, the computer receives GPS signals and information provided by the cellular network. Even when the computer can receive a satellite signal, MS Assisted can improve position accuracy and reduce the time to determine initial position (Time-To-First-Fix). Check with your cell phone carrier for availability and pricing for MS Assisted service. Qualcomms gpsOneXTRA Assistance technology provides enhanced operation for Standalone GPS. This option enables the UMTS-enabled computer to automatically download a small assistance data file from the XTRA servers through a brief internet access session. Another option you can configure with iGPS is the fix interval. The fix interval defines how often the GPS should provide new information. Larger intervals use less power, but many applications require small intervals to work correctly. The default for fix interval is 4. Note: Anytime you change the GPS settings, the phone module will reset automatically. It will not affect the functionality of the computer. To improve GPS performance: 1 Go to Start > Settings > System > iGPS. 2 In the Fix Interval tab, enter a value for the fix interval. The default setting is 4 and should be optimized for most applications. 3 Tap the Fix Type tab and select one of these options: Standalone (1), MS assisted (2), or Enable gpsOneXTRA (check box). 4 Tap OK.
62
6
Configuring the Computer
Use this chapter to learn about the available methods for configuring your mobile computer and how to use Intermec Settings. You can also use this chapter to learn how to configure network communications and wireless security.
63
You can use a third-party device management product that supports the computer and Intermec Settings, such as Soti MobiControl or Wavelink Avalanche. For more information, visit the Device Management page on the Intermec web site. You can also configure the computer with configuration bundles that you create using SmartSystems Foundation. For more information, see the SmartSystems Foundation Online Help.
64
65
Bluetooth Scanner
Camera
Symbologies Scanner settings Imager settings Decode security Symbologies Scanner settings Imager settings Decode security Symbologies Scanner settings Scanner port settings Imager settings Decode security Symbologies Scanner settings Camera settings Decode security
Bluetooth-configure on connect
Communications Menu
Communications Options Device Name 802.11 Radio Parameters You Can Configure Device name
IP settings Certificates
Ethernet Adapter Bluetooth IP settings Bluetooth settings (power, discoverable, connectable, and so on)
66
Chapter 6 Configuring the Computer Communications Options WWAN Radio Parameters You Can Configure
Add WWAN connection Edit WWAN connections Manage WWAN radio WWAN information
Serial port switch settings (IrDA, docking connector, and back interface)
Sensors USB Connections System Component Versions IDL Runtime Versions Profile Settings Application
Power button Battery power External power Screen rotation Device off
USB connections System component versions (read-only) ITC50 (read-only) Whether these parameter options appear in Profile Settings:
67
Printer Menu
Printer Options Printer (if connected through Bluetooth) Parameters You Can Configure Printer settings (Auto detect printer, memory, display, and so on)
Note: The Printer menu displays settings for Bluetooth connected printers. The settings that appear in the menu are dependent on the printer that is paired with the device. The printer needs to be using the Wireless Printer applet. GPS Menu
GPS Options GPS Bread crumbing settings
68
Enable health data collection Enable Blue light Set rule file location Set data refresh periods
Device health screen capture settings (directory and screen capture allowed) None (read-only) Device wipe settings (enable wipe and interval)
For more information on all parameters in Intermec Settings, see the Intermec Settings Command Reference Manual.
69
To move back a level in Intermec Settings: Tap Back or Cancel on the Tile bar.
70
Note: When you restore default settings in Intermec Settings, only the settings for visible items are restored to defaults. The settings for hidden menu items are not affected.
71
The mobile computer contains an 802.11 radio to transfer data using wireless communications and to support the TCP/IP network protocols. This section of the manual assumes that your wireless network is set up, including your access points. By default, the 802.11 radio is disabled. Use the following procedure to enable the Wi-Fi radio using Intermec Settings. If you would like to use ScanNGo bar codes to easily enable the radio and set the default security settings, see Appendix C ScanNGo Wi-Fi Configuration Bar Codes on page 165. To enable the Wi-Fi radio on your computer and configure communications: 1 Tap Start > Settings > System > Intermec Settings. 2 From the Intermec Settings main menu, tap Communications > 802.11 Radio > Radio Enabled. 3 Select the Radio Enabled check box and tap OK. By default, the computer uses Funk security and enables DHCP. 4 Use Intermec Settings to configure any other parameters you need to use for communication with your network. 5 Configure 802.11 security. For help, see About Wireless Security on page 81.
73
3 (Optional) If you want your computer to be visible to other Bluetooth devices, choose Make this device visible to other devices. 4 Tap OK. The Bluetooth radio maintains its state through a reboot or cold boot and maintains virtual COM ports. But, if you clean boot your computer you need to recreate pairings to devices.
74
To connect to an Intermec Bluetooth scanner: 1 Tap Start > Settings > System > Wireless Scanning.
3 Select Quick Connect, Search, or Manual. Follow the onscreen instruction to add a wireless scanner.
75
2 Tap Search to find a printer, or tap Manual to enter a device address. Follow the onscreen instructions to select the current wireless printer. 3 (Optional) Tap Print Test Page. The printer prints out a test page.
76
2 Tap Search to find your Bluetooth headset or hands-free device. 3 Select your device from the list and configure any settings. 4 Click OK when you are done.
77
7 Connect the RS-232 snap-on adapter with the attached scanner to the bottom of the mobile computer.
78
To create an ISP Connection: 1 Tap Start > Settings > Connections > Connections. 2 Under My ISP, tap Add a new modem connection. 3 Enter a name for the connection, such as ISP Connection. 4 If you are using an external modem connected to your mobile computer with a cable, select Hayes Compatible on COM1 from the Select a modem list. 5 Tap Next. 6 Enter the access phone number and then tap Next. 7 Enter the User name, Password, and Domain (if provided by an ISP or your network administrator). 8 Tap Finish. 9 On the Connections screen, tap Advanced on the horizontal scroll.
10 Tap Dialing Rules. 11 When the Enable Dialing Rules box appears, tap OK. 12 Tap Edit.
79
13 In the Name field, enter your phone type (Home, Mobile, or Work). 14 Tap OK until you exit the Connections screen.
80
WEP This section explains how to configure wireless security on your mobile computer. Intermec recommends that you implement WPA2 security using PSK (Personal) or 802.1X (Enterprise) key management as appropriate. You must use either Funk or Microsoft security to implement your security solution. For details, see the next section, Choosing Between Microsoft and Funk Security. If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this section also assumes that your authentication server and authenticators are properly configured. Note: Your security choice does not depend on your authentication server. For example, you can choose Funk security if you use Microsoft Active Directory to issue certificates.
81
If you are primarily using the computer to connect to Wi-Fi hotspots, you may want to use Microsoft security. To use Microsoft security, you need to select it as your security choice. For help, see Selecting Microsoft as Your Security Choice on page 86.
82
4 Choose Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For Association, choose WPA or WPA2. Encryption automatically defaults to TKIP or AES, respectively. 7 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS. 8 If you choose TTLS, EAP-FAST, or PEAP: a For Prompt for Credentials, choose Enter credentials now. b Enter a User Name and User Password. c For Validate Server Certificate, choose Yes. Note: The correct date must be set on your computer when you enable Validate Server Certificate. 9 If you choose TLS: a Load a user and root certificate on your computer. For help, see Loading a Certificate on page 90. b Enter a User Name and Subject Name. c For Validate Server Certificate, choose Yes.
83
8 For Pre-Shared Key, enter the pre-shared key or passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the 70 Series internally converts it to a pre-shared key. This value must match the passphrase on the authenticator. 9 Save your settings.
84
4 For Association, choose Open. 5 For Encryption, choose None. 6 Tap OK. Your settings are saved.
3 Choose Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, choose Infrastructure. 5 For Network Authentication, choose WPA or WPA2. Data Encryption automatically defaults to TKIP for WPA and AES for WPA2. 6 For 802.1x Authentication, choose either TLS, or PEAP. 7 If you choose TLS: a Load a user and root certificate on your computer. For help, see Loading a Certificate on page 90. b Choose Properties. The Certificates dialog box appears. c Select the certificate you want to use from the list. The User Logon dialog box appears.
d Enter a User Name and Domain and tap OK. e Tap OK to exit the Certificates dialog box. f Press OK to save the Microsoft Security settings.
8 If you choose PEAP: a Load a root certificate of the authentication server on your computer. For help, see Loading a Certificate on page 90. b Press OK to save the security settings and the User Logon dialog box appears. c Enter a User Name, Password, and Domain. Select Save Password if you want to save the password for future authentication sessions.
87
3 Choose Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, choose Infrastructure. 5 For Network Authentication, choose WPA-PSK. Data Encryption automatically defaults to TKIP for WPA and AES for WPA2. 6 For Pre-Shared Key, enter the pre-shared key or the passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the authenticator. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the computer internally converts it to a pre-shared key. 7 Save your settings.
88
e Tap OK to exit the Certificates dialog box. f Press OK to save the Microsoft Security settings.
9 If you choose PEAP: a Load a root certificate of the authentication server on your computer. For help, see Loading a Certificate on page 90. b Press OK to save the security settings and the User Logon dialog box appears. c Enter a User Name, Password, and Domain. Select Save Password if you want to save the password for future authentication sessions.
d Press OK to save the Microsoft Security settings. 10 For Network Key Setting, choose Automatic. 11 Save your settings.
89
8 For Network Key Index, select the key you want to use for data transmission. 9 Save your settings.
Loading a Certificate
To use transport layer security (TLS) with WPA or 802.1x security, you need a unique client certificate on the computer and a trusted root certificate authority (CA) certificate. Certificates are pieces of cryptographic data that guarantee a public key is associated with a private key. They contain a public key and the entity name that owns the key. Each certificate is issued by a certificate authority. To import a certificate chain: 1 Start Intermec Settings. 2 Go to Start > Settings > System > Intermec Settings.
90
3 Tap Communications > 802.11 Radio > Certificates. The Certificates screen appears.
4 To import a certificate chain: a Tap Import Certificates to install the selected certificate. b In the CertImportUI screen, tap the <<< button next to the Select pfx to import text field. c Select the root certificate from the list. d Tap Import Certificate. 5 To import user and root certificates from a Microsoft IAS server: a Tap Import Certificates. b Tap Web Enrollment. c Enter the User, Password, and Server (IP address) to log into the server.
d Tap OK. A dialog box appears asking if you want to load the root certificate. e Tap OK. The Enrollment Tool message box appears telling you that the certificate has been added. f Tap OK to close the message box.
91
92
7
Managing the Computer
Use this chapter to learn how to remotely update, configure, and monitor your Intermec mobile computers. You will also find information on installing and developing software applications as well as how to upgrade the system software.
93
Through the Console, you can: drag-and-drop configuration bundles, operating system updates, and firmware upgrades to multiple computers.
94
save configuration settings from a single device and deploy those settings to many devices simultaneously. remotely change settings on SmartSystems-enabled computers and peripherals. The SmartSystems Foundation console can report on asset locations and battery status, making it easier to manage your mobile devices. With a Provisioning license, SmartSystems Foundation can automatically push software, configuration settings, and other files to connected mobile computers. The license also enables ScanNGo, which makes connecting additional mobile computers to your wireless network as easy as reading bar codes. You can download SmartSystems Foundation from the Intermec web site at no charge. For more information, visit www.intermec.com/SmartSystems. To purchase a Provisioning license, contact your local Intermec sales representative.
95
2 Double-click the application file to install it. The application file should appear in the Software Vault. 3 From the SmartSystems console in the Software Vault, drag-and-drop the application onto each mobile computer in your network, or drop the application on a group of computers contained in a folder.
97
Use AutoRun.exe to start your application at boot time. AutoRun ships on the computer and automates other operations. At boot time, AutoRun executes any commands found in its data file, Autouser.dat. For more information on how to use the AutoRun.exe feature, view the Readme.txt file located in the My Device\Flash File Store\2577 directory on your computer.
98
99
This process can take anywhere from 30 seconds to 15 minutes depending on the update. After the update is complete, the computer boots again. 7 When a confirmation dialog box appears requesting user input, dismiss it. Note: The SmartSystems console indicates that your mobile computer is offline, by displaying a red stop symbol, until the computer reboots and reconnects to the system.
100
4 Double-tap the package to start the installation. Your mobile computer begins the update process and automatically performs a cold boot. The computer then boots into a special Update Loader mode where the computer has no network connections and is completely unusable. This process can take anywhere from 30 seconds to 15 minutes depending on the update. After the update is complete, the mobile computer boots again. 5 When a confirmation dialog box appears requesting user input, dismiss it.
101
102
8
Troubleshooting and Maintaining the Computer
If you encounter any problems while using the 70 Series computer, look in this chapter to find a possible solution. You will also find information on routine maintenance.
103
Intermec Dashboard is highly integrated with SmartSystems Foundation. You can use SmartSystems Foundation to remotely monitor the health of your computers. For more information, refer to the SmartSystems online help.
104
The computer is connected to the network Move closer to an access point or to a different location and you move to a new site to collect data. to reestablish communications until you reconnect with the network. Your computer now shows you are not connected to the network. The computer appears to be connected to the network, but you cannot establish a terminal emulation session with the host computer. The computer appears to be connected to the network, but the host computer is not receiving any information from the 70 Series computer. There may be a problem with the host computer, or with the connection between the access point and the host computer. Check with the network administrator to make sure the host is running and allowing users to log in to the system. There may be a problem with the connection between the access point and the host computer. Check with the network administrator or use your access point users manual.
105
A network connection icon appears in the The computer may not be communicating with the toolbar, but then disappears. intended access point. Make sure the network name matches the access point network name. Default network name is INTERMEC. The access point may not be communicating with the server. Ensure the access point is turned on, properly configured, and has 802.1x security enabled.
You receive a message saying The Date and time are not saved when you perform a clean boot. server certificate has expired or Reenter the date and time, and then save your changes. your system date is incorrect after you perform a clean boot on the computer.
106
radio transmit power and signal strength information. 2 Tap the Scan tab to view a list of available 802.11 networks. The list includes the signal strength, channel, and MAC address for each network. Tap Scan to refresh the screen. 3 Tap the Supp tab to view radio supplicant information, including a list of supplicant events and authentication status. To verify the settings for the currently active security profile, tap Configure Profile. Intermec Settings launches for you to configure 802.11 Radio settings. To try reconnecting to the network, tap Reconnect. To delete the events in the list, tap Clear Events.
107
4 Tap the Ping tab to run a ping test to the host. To run a ping test: a In the Host field, enter the IP address of the host. b From the Repetitions list, choose the number of times the computer will ping the host. c Tap Ping. The graph shows the amount of time it takes for the host to return the ping. Tap List to see this information in a list format.
5 Tap the RSSI tab to view the received signal strength of the host signal. The information box includes the current signal strength, host SSID name, MAC address, data rate, and transmit power. Tap Mark to place an arrow marker above the graph. 6 Tap the Conf tab to set up a log file that lists RSSI history. This screen includes the 802.11 radio driver version and available radio modes. To create a log file: a Check the Log to File check box. b (Optional) Change the sample period and number of samples displayed. c Tap Log File. The Save As screen appears. d (Optional) Change the name of the saved log file, the folder to which the file will be saved, the content type (log or text), and the location. e Tap OK.
108
You cannot see the illumination You may be too far away from the bar code label. Try moving beam or frame from the imager closer to the bar code label and scan it again. when you press the Scan button You may be reading the bar code label straight on. Change and aim the imager at a bar code the reading angle and try again. label. The imager hardware trigger might be disabled in Intermec Settings. To check the setting go to Start > Settings > Systems > Data Collection > Scanner Settings. Hardware trigger should be checked. When you release a Scan button The Good Read light will remain on if you configure the or handle trigger, the Good Read computer to use continuous/edge triggering. If you configure light does not turn off. the computer for level triggering and the Good Read light remains on, there may be a problem. Press one of the Scan buttons or pull the trigger again without scanning a bar code label. If the light is still on, contact your local Intermec representative. The scanner will not read the bar Aim the scanner beam to cross the entire bar code label in code label. one pass. Vary the scanning angle. Check the quality of the bar code label. Scan a bar code label that you know will scan. Compare the two bar code labels to see if the bar code quality is too low. You may need to replace the label that you cannot scan. Make sure the bar code symbology is enabled and configured correctly. Use Intermec Settings to check the symbologies. Expand Data Collection > Symbologies beneath devices listed (scanner, virtual wedge) to check and enable symbologies, then scan the bar code label again. Make sure the computer application is expecting input from a bar code. You may need to type this information instead. The scanner may not be turned on or the scanner may be unable to scan a specific bar code. Run the ScanDiagnostic application to help you troubleshoot the problem. For more information, see
109
The scanner does not read the bar The scanner window may be dirty. Clean the window with a solution of ammonia and water. Wipe dry. Do not allow code labels quickly, or the scanning beam seems to be faint abrasive material to touch the window. or obscured. You scan a valid bar code label to enter data for your application. The data decoded by the scan module does not match the data encoded in the bar code label. The computer may have decoded the bar code label in a symbology other than the labels actual symbology. Try scanning the bar code label again. Make sure you scan the entire label.
The input device attached to the Set the Scanner Model command to the specific attached input computer does not work well or device. Check enabled bar code symbologies and enable only read bar code labels very quickly. the symbologies being used.
110
You press the Power button and Try the following solutions: nothing happens. Replace or charge the battery. The battery may be completely drained. Remove the battery and press the Reset button to perform a cold boot. For help, see Cold Booting the Computer on page 113. The computer appears to be locked up and you cannot enter data.
Press the Power button and select Suspend from the Power
Options menu. Press the Power button to turn the screen back on. Press the Power button and select Reboot from the Power Options menu. Remove the battery and press the Reset button to perform a cold boot. For help, see Cold Booting the Computer on page 113.
111
112
113
Note: Cold booting the computer does not guarantee that cached disk data will be saved, so transactional data may be lost during the reset. All other data, such as configuration and network settings, is preserved. To cold boot the mobile computer: 1 Press the Power button to suspend the computer. 2 Remove the handstrap and the battery pack. 3 Press the Reset button in the battery compartment on the back of the computer. 4 Replace the battery and the handstrap. 5 Press Power and wait while the mobile computer boots. When the cold boot is complete, the Home screen appears.
Location of CN70/CN70e Reset Button
Reset button
114
Chapter 8 Troubleshooting and Maintaining the Computer Location of CK70/CK71 Reset Button
Reset button
115
To clean boot the computer using the SmartSystems Console: Right-click the 70 Series computer and select Intermec Power Tools > Clean Boot Device.
116
A
Specifications and Default Settings
117
Environmental Specifications
Operating temperature Storage temperature Charging temperature Relative humidity (operating) Environmental rating Drop Specifications -20C to 60C (-4F to 140F) -30C to 70C (-22F to 158F) 0C to 45C (32F to 113F) 5% to 95% non-condensing IP67 compliant All corners and sides from 1.8 m (6 ft) per MIL-STD 810F
118
Operating System
Microsoft Windows Embedded Handheld.
Hardware
Main processor Memory Persistent storage Removable storage Keypad TI OMAP3, 600 MHz 512 MB RAM 1 GB Flash up to 32 GB user-accessible microSD card slot CN70: QWERTY, Numeric CN70e: QWERTY Numeric, Numeric CK70: Large Alpha, Alphanumeric CK71: Numeric Function, Alphanumeric 5 megapixel color camera and EA30 area imager (all), EV12 (CK71 only), or EX25 (CK71 only) 119
Imaging options
Standard Communications
UMTS (not available on CK71) CDMA (not available on CK71) GPS (not available on CK71) 802.11a/b/g/n Bluetooth USB high speed 2.0 OTG
Wireless LAN
Standards compliant IEEE 802.11a/b/g/n (2.4 GHz and 5 GHz), Single Stream Data rates Security up to 72Mbps 802.11i, WPA, WPA2, 802.1x (EAP-TLS, TTLS, LEAP, PEAP, EAP-FAST), WEP
120
Appendix A Specifications and Default Settings Certifications WPA2 (Enterprise, Personal), WPA (Enterprise, Personal), Wi-Fi, WMM, WMM Power Save, Cisco Compatible Extensions (CCX 4.0)
Regulatory Approvals
FCC, CE, cULus Listed, DEMKO
* These symbologies are not supported with the EV12 imager in the CK71.
121
4"
8"
12"
16"
20"
24"
28" 30
8"
PDF417 10 mils
20
4"
10
0"
4"
10
8"
20
12"
1 mm / 40 mils
30 cm
10
20
30
40
50
60
70
122
PDF417
4"
8"
12"
16"
20"
24"
28"
32"
36"
30
8"
PDF417 10 mils
20
4"
10
0"
4"
10
8"
20
12"
1 mm / 40 mils
30 cm
10
20
30
40
50
60
70
80
90
123
PDF417
124
in
8" 7" 6" 5" 4" 3" 2" 1" 0" 1" 2" 3"
2"
4"
6"
8"
10"
12"
14"
16"
20
15
EAN/UPC 100%
10
0.125 mm / 5 mils
10
0.5 mm / 20 mils
15
8"
20
cm
0 5 10 15 20 25 30 35 40
EAN/UPC
125
in
16" 14" 12" 10"
4"
8"
12"
16"
20"
24"
28"
32"
36"
40
30
EAN/UPC 100%
20
10
10
20
0.5 mm / 20 mils
30
16"
40
cm
0 10 20 30 40 50 60 70 80 90
EAN/UPC
126
16
32
48
64
80
96
112
128
144
160
EAN 100%
40
80
120
160
200
240
280
320
360
400
440
480
64 32 0 32 64 96 128 160 0 100 200 300 400 500 600 700 800 900 1000 1100 1200
0.25 mm 10 mils
EX25 1D Symbologies Typical Reading Distances With 0.24 cm (0.09 in) Setback
Symbology Code 39 Density 0.25 mm (10 mils) 0.5 mm (20 mils) 1 mm (40 mils) 1.4 mm (55 mils) 2.5 mm (100 mils) 2.5 mm (100 mils) 0.33 mm (13 mils) Minimum Distance 15 cm (5.91 in) 16 cm (6.30 in) 25 cm (9.84 in) 40 cm (15.75 in) ** ** 15 cm (5.91 in) Maximum Distance 135 cm (53.15 in) 280 cm (110.24 in) 550 cm (216.54 in) 720 cm (283.46 in) 1200 cm (472.44 in) 1300 cm (511.81 in) 160 cm (62.99 in)
128
40
80
120
160
200
240
280
320
360
400
440
480
64 32 0 32 64 96 128 160 0 100 200 300 400 500 600 700 800 900 1000 1100 1200
0.25 mm 10 mils
EX25 2D Symbologies Typical Reading Distances With 0.24 cm (0.09 in) Setback
Symbology DataMatrix Density 0.25 mm (10 mils) 0.76 mm (30 mils) 1.4 mm (55 mils) 2.5 mm (100 mils) 7.5 mm (300 mils) Minimum Distance 15 cm (5.91 in) 25 cm (9.84 in) ** ** 20 cm (7.87 in) Maximum Distance 90 cm (35.43 in) 310 cm (122.05 in) 450 cm (177.17 in) 1100 cm (433.07 in) 1524 cm (600 in)
129
Default Configuration
The following tables list the default values of the configuration settings supported on the mobile computer. If you restore the mobile computer to factory default settings, the mobile computer uses these values. The settings are grouped by function and reflect the organization of Intermec Settings. Not all of the configuration settings are listed in this appendix. For detailed information on most of the settings, see the Intermec Settings Command Reference Manual.
Symbology Settings
Symbology AustraliaPost Aztec BPO CanadaPost Codabar Codablock A Codablock F Code 11 Code 39 Code 93 Code 128/GS1-128 Default Value Disable Disable Disable Disable Disable Disable Disable Disable Enable Disable Enable
130
Appendix A Specifications and Default Settings Symbology DataMatrix DutchPost EAN/UPC GS1 Composite GS1 DataBar Expanded GS1 DataBar Limited GS1 DataBar Omni-Directional Infomail Intelligent Mail Interleaved 2 of 5 JapanPost Matrix 2 of 5 Maxicode Micro PDF417 MSI PDF417 Planet Plessey Postnet QR Code Standard 2 of 5 SwedenPost Telepen TLC 39 Default Value Enable Disable Enable UPC A, UPC E, EAN 8, EAN 13 Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Enable Disable Disable Disable Disable Disable Disable Disable Disable
131
Scanner Settings
Scanner Settings Trigger Predefined Modes Trigger Mode Aimer Mode Hardware Trigger Trigger Timeout (sec) Aiming Duration (msec) Turn Off After Good Read Default Value Level Level Typical aimer Enable 2 500 Enable/One-shot
Imager Settings
Imager Settings Predefined Modes Image File Location Signature Image Capture Document Imaging Image Capture Output Compression Output Compression Quality Edge Enhancement Noise Reduction Subsampling Image Rotation Image Lighting Correction Default Value 1D and 2D Standard \My Documents\MDI Disable Disable Bitmap 0 None 0 None None Disable
132
Communications
Use communications settings to configure how the mobile computer communicates with the network. Communications Settings
Communications Setting Device Name Default Value IntermecCXXX (where XXX indicates the model of mobile compuer)
Bluetooth Settings
Bluetooth Setting Bluetooth Power Default Value Off
133
Device Settings
Use device settings to configure settings on the mobile computer. Device Settings
Device Setting Date Time Beeper and Voice Headset Beeper Vibrate Mode Intensity Default Value N/A N/A Medium Very Low 1 Strong Pulse
Backlight Settings
Backlight Setting Display Backlight Adjustment Keypad Backlight Light Level Default Value Normal On Based on Light Level Low
Screen Settings
Screen Setting Default Value Portrait 0 Degrees
Screen Rotations
134
Keypad Settings
Keypad Setting Default Value Scanner
Default Value On Hibernate, Suspend, Reboot 5 Suspend 5 minutes Disabled Disabled Disabled
Sensors Settings
Sensors Setting Screen Rotation Device Off Default Value Disabled Disabled
135
GPS Settings
Use GPS settings to configure how the mobile computer communicates with the GPS network. GPS
GPS Setting Enable Bread Crumbing Default Value Disable
System Device Health Refresh (seconds) 90 Network Device Health Refresh (seconds) 45
136
Device Wipe
Device Wipe Setting Enable Wipe Interval (in days) Default Value Disabled Null
137
138
B
Keypads and Keystrokes
139
Standard Characters
Use the following tables to learn how to enter standard and other available characters and functions with the keypad. If there is no sequence of keystrokes for a particular character or function, it is only available through the soft input panel (SIP), which you can access by tapping the keyboard icon on the touch screen.
c2 c22 c222 c3 c33 c333 c4 c44 c444 c5 c55 c555 c6 c66 c666
A B C D E F G H I J K L M N O
70 Series Mobile Computer Users Manual
140
c7 c77 c777 c7777 c8 c88 c888 c9 c99 c999 c9999 c12 c122 c1222 c13 c133 c1333 c14 c144 c1444 c15
P Q R S T U V W X Y Z yA yB yC yD yE yF yG yH yI yJ
141
c155 c1555 c16 c166 c1666 c17 c177 c1777 c17777 c18 c188 c1888 c19 c199 c1999 c19999 0 1 2 3 4
yK yL yM yN yO yP yQ yR yS yT yU yV yW yX yY yZ b, bY bU bI bH
70 Series Mobile Computer Users Manual
142
5 6 7 8 9
Numeric Keypad N/A N/A
bJ bK bB bN bM
QWERTY Keypad
*
N/A N/A N/A N/A
N/A
. b#
N/A N/A
bQ bS bC bD bX bE bO bG bR . bT bV bA bZ
143
Appendix B Keypads and Keystrokes To Enter Forward Tab Backspace Up Arrow Down Arrow Left Arrow Right Arrow CapsLock Enter ok Shift Space Start (Windows) Esc Talk End Call Intermec Dashboard Numeric Keypad QWERTY Keypad
j { u d l r c1 e b| b or c c0 b m or c m | p w m
j { u d l r yy e bP b or y s bm | p w m
144
c2 c22 c222 c3 c33 c333 c4 c44 c444 c5 c55 c555 c6 c66 c666 c7 c77 c777 c7777
A B C D E F G H I J K L M N O P Q R S
145
Appendix B Keypads and Keystrokes Character t u v w x y z A B C D E F G H I J K L M N Numeric Keypad QWERTY Numeric Keypad
c8 c88 c888 c9 c99 c999 c9999 c12 c122 c1222 c13 c133 c1333 c14 c144 c1444 c15 c155 c1555 c16 c166
T U V W X Y Z yA yB yC yD yE yF yG yH yI yJ yK yL yM yN
70 Series Mobile Computer Users Manual
146
Appendix B Keypads and Keystrokes Character O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 Numeric Keypad QWERTY Numeric Keypad
c1666 c17 c177 c1777 c17777 c18 c188 c1888 c19 c199 c1999 c19999 0 1 2 3 4 5 6 7 8
yO yP yQ yR yS yT yU yV yW yX yY yZ 0 1 2 3 4 5 6 7 8
147
Appendix B Keypads and Keystrokes Character 9 Numeric Keypad QWERTY Numeric Keypad
9
Numeric Keypad N/A N/A
9
QWERTY Numeric Keypad
*
N/A N/A N/A N/A
N/A
. b#
N/A N/A
j { u d
bQ bU * bI , bE bO bR . b# bY bW j { u d
70 Series Mobile Computer Users Manual
148
Appendix B Keypads and Keystrokes To Enter Left Arrow Right Arrow CapsLock Enter ok Shift Space Start (Windows) Esc Talk End Call Intermec Dashboard Numeric Keypad QWERTY Numeric Keypad
l r c1 e b| b or c c0 b m or c m | p w m
l r yy e b| b or y s bm | p w m
A B C D E F
A B C D E F
149
Appendix B Keypads and Keystrokes Character g h i j k l m n o p q r s t u v w x y z A Large Alpha Keypad Alphanumeric Keypad
G H I J K L M N O P Q R S T U V W X Y Z yA
G H I J K L M N O P Q R S T U V W X Y Z yA
70 Series Mobile Computer Users Manual
150
Appendix B Keypads and Keystrokes Character B C D E F G H I J K L M N O P Q R S T U V Large Alpha Keypad Alphanumeric Keypad
yB yC yD yE yF yG yH yI yJ yK yL yM yN yO yP yQ yR yS yT yU yV
yB yC yD yE yF yG yH yI yJ yK yL yM yN yO yP yQ yR yS yT yU yV
151
Appendix B Keypads and Keystrokes Character W X Y Z 0 1 2 3 4 5 6 7 8 9 Large Alpha Keypad Alphanumeric Keypad
yW yX yY yZ bP bD bE bF bG bH bI bK bL bM
Large Alpha Keypad
yW yX yY yZ 0 1 2 3 4 5 6 7 8 9
Alphanumeric Keypad N/A
bS bW bO bJ cJ
bU b0 b2 b5
70 Series Mobile Computer Users Manual
152
Appendix B Keypads and Keystrokes To Enter , (comma) $ (dollar) ! (exclamation) - (hyphen or minus) % (percent) . (period) + (plus) # (pound) ? (question mark) (apostrophe) = (equals) _ (underscore) > (greater than) < (less than) [ (left square bracket) ] (right square bracket) { (left curly brace) } (right curly brace) ~ (tilde) \ (backslash) / (forward slash) Large Alpha Keypad Alphanumeric Keypad
bT cS cW cX cO . bX bQ cQ cT bY cY cN bN bV cV
N/A N/A N/A
cX
N/A N/A
cs
N/A
cU bU
. bs c0 cY bY bS cX cV bV bT cT bU cU bW c8 b8
153
Appendix B Keypads and Keystrokes To Enter (quotes) ( (left parenthesis) ) (right parenthesis) Insert Delete Sym (broken vertical bar) Large Alpha Keypad N/A Alphanumeric Keypad
bZ
N/A N/A
bR cR bZ cZ bs
N/A N/A
b4 b6
N/A
(grave)
Forward Tab Backspace Up Arrow Down Arrow Left Arrow Right Arrow CapsLock Enter ok Shift Space Start (Windows) Esc
j { u d l r yy e cm y s b m or c m |
cS cW j { u d l r yy e cm y s b m or c m |
70 Series Mobile Computer Users Manual
154
Appendix B Keypads and Keystrokes To Enter Alt Ctrl Send Call End Call Intermec Dashboard Large Alpha Keypad N/A Ctrl Alphanumeric Keypad Alt Ctrl
bA bC m
Large Alpha Keypad
c1 c3 m
Alphanumeric Keypad
cD cE cF cG cH cI cK cL cM cP
N/A N/A N/A N/A N/A
b b b b b bA bB bC bD bE
155
Appendix B Keypads and Keystrokes To Enter F16 F17 F18 F19 F20 F21 F22 F23 F24 Large Alpha Keypad N/A N/A N/A N/A N/A N/A N/A N/A N/A Alphanumeric Keypad
bF bG bH bI bJ bK bL bM bN
b7 b8 b9 b4 b5 b6 b1 b2 b3
A B C D E F G H I
70 Series Mobile Computer Users Manual
156
Appendix B Keypads and Keystrokes Character j k l m n o p q r s t u v w x y z A B C D Numeric With Function Keys Keypad Alphanumeric Keypad
J K L M N O P Q R S T U V W X Y Z yA yB yC yD
157
Appendix B Keypads and Keystrokes Character E F G H I J K L M N O P Q R S T U V W X Y Numeric With Function Keys Keypad Alphanumeric Keypad
yE yF yG yH yI yJ yK yL yM yN yO yP yQ yR yS yT yU yV yW yX yY
70 Series Mobile Computer Users Manual
158
Appendix B Keypads and Keystrokes Character Z 0 1 2 3 4 5 6 7 8 9 Numeric With Function Keys Keypad Alphanumeric Keypad
b y Alt 0 1 2 3 4 5 6 7 8 9
Numeric With Function Keys Keypad
yZ 0 1 2 3 4 5 6 7 8 9
Alphanumeric Keypad
cs
N/A N/A
b8 b5 cX
N/A N/A
cS cW .
N/A
cs . bs
159
Appendix B Keypads and Keystrokes To Enter (apostrophe) = (equals) _ (underscore) > (greater than) < (less than) [ (left square bracket) ] (right square bracket) { (left curly brace) } (right curly brace) ~ (tilde) \ (backslash) / (forward slash) (quotes) Insert Delete (broken vertical bar) Numeric With Function Keys Keypad N/A N/A Alphanumeric Keypad
c Alt c Ctrl
N/A
bl c4
N/A N/A
(grave)
Forward Tab Backspace Up Arrow Down Arrow
j { u d
bY bS cX cV bV bT cT bU cU bW c2 b2 bZ b4 b6 cS cW j { u d
70 Series Mobile Computer Users Manual
160
Appendix B Keypads and Keystrokes To Enter Left Arrow Right Arrow CapsLock Enter ok Shift Space Start (Windows) Esc Alt Ctrl Intermec Dashboard Numeric With Function Keys Keypad Alphanumeric Keypad
l r yy e cm y s b m or c m |
Alt Ctrl
l r yy e cm y s b m or c m | b|
Ctrl
m
Numeric With Function Keys Keypad
m
Alphanumeric Keypad
b b
161
Appendix B Keypads and Keystrokes To Enter F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 Numeric With Function Keys Keypad Alphanumeric Keypad
c c c c c c c c c c c c
b b b bA bB bC bD bE bF bG bH bI bJ bK bL bM bN
162
c0
N/A
b6
N/A N/A N/A N/A
cx bx
N/A N/A N/A
c.
N/A N/A N/A N/A
c9 c1 c2
cA c c6 cD c cE cF c1 c1 cG b3 cI cH cK cM cO cN b9 c c
163
Appendix B Keypads and Keystrokes To Enter PA3 Page Print Previous Screen Remove Reset Return Roll Down Roll Up System Request View View Down View Up Numeric With Function Keys Keypad Alphanumeric Keypad
c3 cd
N/A
c7
N/A
c| ce c5 c8 br
N/A
c cd cP c7 cR c| ce c5 c8 cQ bd
N/A N/A
bd bu
164
C
ScanNGo Wi-Fi Configuration Bar Codes
You can use the ScanNGo Wi-Fi configuration bar codes to quickly configure the 802.11 radio in your computer.
165
166
167
168
Appendix C ScanNGo Wi-Fi Configuration Bar Codes To Configure These Settings: Enable Wi-Fi - set Funk defaults (continued) Scan This Bar Code
169
Appendix C ScanNGo Wi-Fi Configuration Bar Codes To Configure These Settings: Enable Wi-Fi - set Funk defaults (continued) Scan This Bar Code
170
Appendix C ScanNGo Wi-Fi Configuration Bar Codes To Configure These Settings: Enable Wi-Fi radio - set Microsoft WZC defaults (continued) Scan This Bar Code
171
Appendix C ScanNGo Wi-Fi Configuration Bar Codes To Configure These Settings: Enable Wi-Fi radio - set Microsoft WZC defaults (continued) Scan This Bar Code
172
Appendix C ScanNGo Wi-Fi Configuration Bar Codes To Configure These Settings: Enable Wi-Fi radio - set Microsoft WZC defaults (continued) Scan This Bar Code
173
174
I
Index
175
Index Symbols .cab files, using to install applications 96 Numerics 70 Series computer models 2 features 5 802.11 communications, configuring 73 802.11 network status troubleshooting 107 802.11 radio, default settings 133 802.1x security configuring with Funk 84 configuring with Microsoft 88 troubleshooting 106 with Funk 84 A accessories, described 8 activation wizard, starting 53 ActiveSync downloading 100 establishing a partnership 34 using to install applications 97 aligning the screen 43 alpha with numeric keypad illustrated 18 keypresses, listed 149156 alphanumeric keypad illustrated 18 keypresses, listed 149164 applications developing with Intermec Resource Kits 95 installing with a storage card 97 installing with ActiveSync 97 installing with computer as mass storage device 35 installing with Console 96 Intermec 44 Intermec, available for download 45 Intermec, available on computer 44 launching automatically 97 packaging 96 troubleshooting 113 ASCII scanner, connecting 78 audio device, connecting with Bluetooth 77 audio snap-on adapter, described 8 AutoRun, description 96 AutoRun.exe, using to start application 97 B back accessory interface description 8 pin-outs 120 backlight configuring screen 25 keypad behavior 18 bar code default symbology settings 130 radio configuration 166 reading 27 reading, troubleshooting 109 symbologies 121 battery about 10 battery icons, described 13 changing 10 charging 10 charging accessories 10 checking the status 13 conserving battery life 15 descriptions 8 status LED 14 Bluetooth Audio application description 44 audio device, connecting to 77 communications, configuring 7477 printer, connecting to 76 scanner, connecting to 74 C calling product support 112 camera, description 56 CDMA phone activating 52 carriers 52 certificate, loading 90
176
Index characters entering on CK70/CK71 keypad 23 entering on numeric keypad 22 entering on QWERTY keypad 21 entering with keystrokes 140164 charging accessories, battery 10 charging the battery 10 CK70 keypads, illustrated 18 status LEDs 6, 7 CK70/CK71 battery, described 8 entering characters on keypad 23 magstripe reader adapter, described 8 CK71 keypads, illustrated 18 status LEDs 7 clean boot, performing 115 cleaning computer 116 CN70 keypads, illustrated 16 status LEDs 6 CN70/CN70e battery, described 8 vehicle dock, described 9 vehicle holder, described 9 cold boot, performing 113 communications 802.11, configuring 73 Bluetooth, configuring 7477 default settings 133 Ethernet, configuring 73 serial 77 USB 77 configuration number, finding 112 configuring parameters 64 conserving battery life 15 Console, using to install applications 96 contact information, Intermec ii D Dashboard about the button 25 button, using 104 description 104 illustration 104 70 Series Mobile Computer Users Manual launching 25 default settings bar code symbologies 130 communications 133 imager 132 listed 130137 restoring Intermec Settings 71 scanner 132 desktop stand, described 8 DX1 desktop dock, described 8 DX2 dual dock, described 8 DX4 quad dock, described 8 E EA30 area imager, reading distances 122 electrial specifications 119 eMDI, description 45 emergency phone call, making with computer 54 Enhanced Mobile Document Imaging (eMDI) application, description 45 environmental specifications 118 Ethernet communications, configuring 73 snap-on adapter, described 9 EV12 linear imager, reading distances 125 EX25 imager, reading distances 127 F Features Demo, description 46 features of 70 Series 5 files, transferring to and from PC 34 fix interval, configuring with iGPS 62 flash file store, using computer as 35 flick, screen gesture described 40 Funk security 802.1x 84 configuring 802.1x 84 configuring static WEP 85 configuring WPA Enterprise (802.1x) 82 configuring WPA Personal (PSK) 83 configuring WPA2 Enterprise (802.1x) 82 177
Index Funk security (continued) configuring WPA2 Personal (PSK) 83 profile, choosing 82 using open (no security) associations 85 G gestures, supported 39 Good Read LED description 7 troubleshooting 109 GPS configuring 60 GPSID, overview 60 improving performance 61 GPSID (GPS Intermediate Driver) overview 60 gpsOneXTRA, description 61 H handstrap replacement kit, described 9 hard reset, performing 113 health, monitoring computer 104 Hibernate (battery swap), description 24 holster, described 9 Home screen, understanding 38 horizontal scroll bar description 38 illustration 38 I IDL (Intermec Developer Library) 95 iGPS application description 44 iGPS, using to improve performance 61 Image Capture, description 46 Image Update silently updating system software 100 using to update system software 98 imager default settings 132 reading distances 122129 Intermec Browser, description 46 Intermec Connection Manager, description 46 Intermec Dashboard, about 104 178 Intermec Developer Library (IDL) 95 Intermec Launcher, description 47 Intermec Resource Kits described 95 downloading 95 Intermec Settings command reference manual link 69, 72 described 64 description 44, 64 hiding menu items 71 main menu illustration 65 menu options 6569 navigating in 70 restoring default settings 71 restoring menu items 71 starting 65 understanding structure 65 using remotely with SmartSystems 72 using to configure Profile Settings 70 Intermec, contact information ii Internet Service Provider (ISP) connection, creating 78 ISpyWiFi application description 44 diagnosing Wi-Fi status 107 K Key status LED, description 7 keypad backlight behavior 16, 18 keystrokes for entering characters 140164 keypads illustrated 16 troubleshooting keys 111 Knowledge Central web site 112 L language provisioning 9 launching applications automatically 97 LEDs battery status, described 14 status descriptions 7 Location of the CK70 Status LEDs 7 locked computer, troubleshooting 111 70 Series Mobile Computer Users Manual
Index M magstripe reader adapter, described 8 magstripe reader snap-on adapter, described 8 mass storage device, using computer as 35 memory, computer 119 microSD card about 28 installing in a CK70/CK71 31 installing in a CN70/CN70e 28 Microsoft security choosing 86 configuring 802.1x 88 configuring static WEP 89 configuring WPA Enterprise (802.1x) 86 configuring WPA Personal (PSK) 87 configuring WPA2 Enterprise (802.1x) 86 configuring WPA2 Personal (PSK) 87 using open (no security) associations 90 models of 70 Series computers 2 MS Assisted mode, description 61 N network connection, troubleshooting 105 non-incendive (NI) specifications 119 Notification LED, description 7 numeric function keypad, illustrated 18 numeric keypad entering characters on 22 illustrated 16 keypresses, listed 140 numeric with function keys keypad keypresses, listed 156164 O open associations configuring with Funk 85 configuring with Microsoft WZC 90 operating system finding version 113 version 2 P pan, screen gesture described 40 phone CDMA, activating 52 features 50 making a call 54 making an emergency call 54 turning on and off 53 UMTS, activating 50 physical specifications 118 picture saving to an SD card 57 storage location 56 taking with camera 56 pin-outs, back accessory interface 120 Power button, description of behavior 23 power options customizing 25 setting 23 power specifications 119 predefined imager mode, choosing 27 printer, connecting with Bluetooth 76 processor, computer 119 product support calling 112 Knowledge Central web site 112 product support, calling 112 Profile Settings configuring with Intermec Settings 70 Profile Settings application description 44 profile, choosing Funk security 82 Q QWERTY keypad entering characters on 21 illustrated 16
179
Index R reading bar codes 27 reading distances EA30 area imager 122 EV12 linear imager 125 EX25 imager 127 Ready-to-Work LED description 7 reboot performing 113 power option description 25 recording a video 57 regulatory approvals 121 Reset button, location 114 reset, performing 113 RS-232 snap-on adapter, described 9 S scan handle, described 9 ScanDiagnostic Intermec application description 45 using to troubleshoot 110 scanner Bluetooth, connecting to 74 default settings 132 tethered scanner, connecting 78 troubleshooting 109 scanners supported tethered and cordless 27 ScanNGo radio configuration bar codes 166 screen aligning 43 backlight, configuring 25 brightness, configuring 26 gestures 39 no response, troubleshooting 111 specifications 120 Screen Off power option description 25 SD card, using to save pictures and videos 57 security, wireless 802.1x with Funk 84 choosing Funk or WZC 81 serial communications, about 77 180 settings default, listed 130137 Shift status LED, description 7 Shutdown power option description 25 silently updating system software 100 SIM card, installing 50 SmartSystems Foundation console, illustration 94 Console, using to install applications 96 description 47 downloading 47, 95 monitoring computer health 104 ScanNGo description 95 updating system software 99 using the Console to install applications 96 using to manage computer 94 using with remote Intermec Settings 72 specifications non-incendive (NI) 119 physical and environmental 118 status icons, Title bar 40 status LEDs CK70 6 CN70 6 descriptions 7 storage card, using to install applications 97 storage, computer 119 Suspend, power option description 24 symbologies, supported 121 system software updating with SmartSystems Foundation 99 system software, updating 98 T terminal emulation, troubleshooting 105 tethered scanner, connecting 78 tethered stylus replacement kit, described 9 Tile bar description 38 illustration 38 70 Series Mobile Computer Users Manual
Index Title bar description 38 illustration 38 status icon descriptions 40 transferring files, to and from PC 34 troubleshooting 105110 802.11 network status 107 802.1x security 106 operation 111 reading bar codes 109 Wi-Fi connection 105 turning on or off phone 53, 54 U UMTS phone, activating 50 update packages, installing individual 100 USB communictions, about 77 USB snap-on adapter, described 9 V vehicle dock accessories, described 9 video recording 57 saving to an SD card 57 Virtual Private Network (VPN) connection, creating 80 volume, adjusting 26 W Wavelink Avalanche, downloading the enabler 95 WEP static, configuring with Funk 85 static, configuring with Microsoft 89 WiFi communications supported 5 Wi-Fi radio, enabling 73 Wi-Fi, troubleshooting 105 Windows Embedded Handheld, user interface 38 Windows Mobile Device Center downloading 100 wireless connectivity, troubleshooting 105 Wireless Center application description 45 Wireless Printing application description 45 Wireless Scanning application description 45 wireless security 8191 802.1x with Funk 84 certificate, loading 90 choosing Funk or WZC 81 configuration bar codes 166 Wireless Zero Configuration (WZC), selecting security choice 86 WPA Enterprise (802.1x) security, configuring with Funk 82 Enterprise (802.1x) security, configuring with Microsoft 86 Personal (PSK) security, configuring with Funk 83 Personal (PSK) security, configuring with Microsoft 87 WPA2 Enterprise (802.1x) security, configuring with Funk 82 Enterprise (802.1x) security, configuring with Microsoft 86 Personal (PSK) security, configuring with Funk 83 Personal (PSK) security, configuring with Microsoft 87 www.intermec.com Knowledge Central 112 manuals, downloading ix, xi Product Support 112 warranty information ix
181
Index
182
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com 2011 Intermec Technologies Corporation. All rights reserved.
*935-038-002*
P/N 935-038-002