Professional Documents
Culture Documents
Inverter welding machine, DC, pulse, gas-cooled Portable, compact Robust plastic casing with no corners or edges Polarity selection and display: superb for welding self-shielding flux cored wires 4-roller wire feed, equipped for 0.8 mm + 1.0 mm steel wires Spool diameter up to 200 mm 3.5 m mains supply lead with 16 A shock-proof plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage
Pulsed arc Controlled, short circuit-proof pulsed arc for all positions Setting range for welding current Duty cycle at ambient t.e 25% 30% 35% 60% 100% Open circuit voltage Mains frequency Mains fuses (slow-blow) Mains voltage (tolerances) Max. connected load Recommended generator power Dimensions, machine, LxWxH in mm Weight, machine Protection classification Insulation class Torch connection Standards 6.4kVA
TIG 5A - 180A 40C 180A 140A 120A 80V 50Hz/ 60Hz 1x 16A
1x 230V (-40%- +15%) 4.4kVA 7.5kVA 685x 280x 360 15kg IP 23 H Euro torch connector IEC 60 974-1;-5;-10/ CE/ S-Safety sign/ EMC class A 5.5kVA
Wide range of possible applications with convenient operation Pre-programmed JOBs for the most common welding tasks as well as Synergic operation with self-explanatory operating panel
Picomig ideal for self-shielding flux cored wires Cost-effective as with MMA welding, welding tasks with flux cored wire and MIG/MAG welding process can also be performed in the open air
Innovative pulse welding for stainless steel and aluminium The perfect pulse welding job guarantees superb welding results when joining stainless steel and aluminium, thanks to controlled globular transfer and targeted, adapted heat input
Four full welding processes Professionally equipped: MIG/MAG pulse, standard, MMA and TIG (lift arc) welding in a single machine
www.ewm-group.com