You are on page 1of 2

Motto________________________

W20D3 Trigonometry Intro

Name_________________________ Period____________ Date____________

On the other page of this assignment you will see a diagram showing a circle with a radius of one. There is a 40degree angle drawn on top of it. Please check now to see that the angle ends (approximately) at the point . We can approximate to the hundredths place from this diagram. Below you see a table with rows for every angle between and , in increments of ten degrees. In the row for , please enter 0.76 under the -coordinate, because 0.76 is the -coordinate of the end of the angle on the diagram. Please enter 0.64 under the -coordinate, because 0.64 is the -coordinate of the end of the angle. Finally, please enter 0.84 under ratio of , because is approximately 0.84. Your assignment is to fill out this chart completely, for all 35 of the other angles listed. The coordinates you get will vary as you choose other angles. You will need a protractor to draw angles please actually draw the angles you need to measure, and do not attempt to estimate angles without a protractor. If you find a logical shortcut, you may use it.

Angle 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Ratio of coordinate coordinate

Angle 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360

Ratio of coordinate coordinate

You might also like