Professional Documents
Culture Documents
0M
Ceramic Resonator
1. SCOPE This specification shall cover the characteristics of the ceramic resonator with the type Z4.0M 2. PART NO.:
PART NUMBER CUSTOMER PART NO SPECIFICATION NO
Z4.0M 3. OUTLINE DRAWING AND DIMENSIONS: Appearance: No visible damage and dirt. Construction: Leads are soldered on electrode and body is molded by resin. Dimensions:
Z4.0M
UNITmm
http://www.luguang.cn
mail:lge@luguang.cn
Z4.0M
Ceramic Resonator
4. ELECTRICAL SPECIFICATIONS:
Oscillation Frequency FoscMHz Frequency Accuracy % Resonant Impedance Romax 4.0 0.5 30 0.3 Oscillation Frequency drift -25+85 0.3 For Ten Years 6VDC 15Vp-p 100 100V1min 50VDC1min
Temperature Coefficient of Oscillation Frequency %max Aging Rate %max Rating Voltage URVmax
5. MEASUREMENT: Measurement Conditions: Parts shall be measured under a condition ( Temp. 2015 ,Humidity 6520% R.H.) unless the standard condition(Temp. 253 ,Humidity 655% R.H.) is regulated to measure. Test Circuit:
http://www.luguang.cn
mail:lge@luguang.cn
Z4.0M
Ceramic Resonator
6.2
6.3
6.4
6.5
6.6
6.7
6.8
http://www.luguang.cn
mail:lge@luguang.cn
Z4.0M
Ceramic Resonator
Table 1 Item
Oscillation Frequency Change fosc/fosc %max Resonant Impedance Ro max
Note The limits in the above table are referenced to the initial measurements. 7. REVIEW OF SPECIFICATIONS When something gets doubtful with this specifications, we shall jointly work to get an agreement.
http://www.luguang.cn
mail:lge@luguang.cn
Z4.0M
Ceramic Resonator
within 10 sec
Temperature()
Pre-heating
within 80-120sec.
within 20-40sec
http://www.luguang.cn
mail:lge@luguang.cn