Professional Documents
Culture Documents
Product specification
NE/SA/SE4558
DESCRIPTION
The 4558 is a dual operational amplifier that is internally compensated. Excellent channel separation allows the use of a dual device in a single amp application, providing the highest packaging density. The NE/SA/SE4558 is a pin-for-pin replacement for the RC/RM/RV4558.
PIN CONFIGURATIONS
D and N Packages
AOUT 1 AIN 2 AIN+ 3 V 4 A + B + 8 7 6 5 V+ BOUT BIN BIN+
FEATURES
2MHz unity gain bandwidth guaranteed Supply voltage 22V for SE4558 and 18V for NE4558 Short-circuit protection No frequency compensation required No latch-up Large common-mode and differential voltage ranges Low power consumption
ORDERING INFORMATION
DESCRIPTION 8-Pin Plastic Small Outline (SO) Package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP)
TEMPERATURE RANGE 0 to +70C 0 to +70C -40 to +85C -40 to +85C -55 to +125C
EQUIVALENT SCHEMATIC
8 v+
OUYPUT 1(7)
4 V
65
853-0840 13721
Product specification
NE/SA/SE4558
NOTES: 1. Derate above 25C at the following rates: N package at 9.3mW/C D package at 6.2mW/C 2. For supply voltages less than 15V, the absolute maximum input voltage is equal to the supply voltage. 3. Short-circuit may be to ground on one amp only. Rating applies to +125C case temperature or +75C ambient temperature for NE4558 and to +85C ambient temperature for SA4558.
DC ELECTRICAL CHARACTERISTICS
VCC=+15V, TA= 25C unless otherwise specified. SYMBOL VOS IOS IBIAS RIN AV PARAMETER Input offset voltage VOS/T Input offset current IOS/T Input bias current IB/T Input resistance Large-signal voltage gain Output voltage swing VIN CMRR PSRR ISC Input voltage range Common-mode rejection ratio Power supply rejection ratio Short-circuit current Power consumption (all amplifiers) RL= RS10k RS10k 5 RL2k VOUT=10V RL10k RL2k Over temp. 0.3 50,00 0 12 10 12 70 Over temp. TEST CONDITIONS RS10k Over temp. SE4558 SA/NE4558 UNIT mV V/C 200 500 nA pA/C nA pA/C M V/V V V V dB 150 60 170 V/V mA mW
Min
Typ
1.0 4 50 20 40 40 1.0 300,0 00 14 13 13 100 10 25 120
Max
5.0 200 500
Min
Typ
2.0 4 30 20 200 40
Max
6.0
66
Product specification
NE/SA/SE4558
SE4558
SA/NE4558
Min
Typ
Max
Min
Typ
Max
UNIT
Transient response (unity gain) tR Rise time Overshoot SR Slew rate (unity gain) Channel separation (gain=100) GBW M VNOISE Unity gain bandwidth (gain=1) Phase margin Input noise voltage
NOTE: The following specifications apply over operating temperature range. VOS IOS IBIAS AV Input offset voltage Input offset current Input bias current Large-signal voltage gain Output voltage swing PC Power consumption RL2k VOUT=10V RL2k TA=HIGH TA=LOW 25,000 10 105 125 150 200 RS10k 6.0 500 1500 15,000 10 115 120 150 200 mV nA nA V/V V mW mW
67
Product specification
NE/SA/SE4558
15 10 5 0 5
10 15
CommonMode Range as a Function of Supply Voltage
TA = 25oC 4 6 8 10 12 14 16 18 SUPPLY VOLTAGE (V)
400K
200K
10 20 30
40 50
60 70
TEMPERATURE (oC)
TEMPERATURE (oC)
Typical Output Voltage as a Function of Supply Voltage
TA = 25oC 15 10 5 0 5 10 15 RL = 2K 6 8 4 10 12 14 16 SUPPLY VOLTAGE (V)
18
5.0
10
4 0 100
1K
10K
100K
1M
FREQUENCY (Hz)
68
Product specification
NE/SA/SE4558
Transient Response
10 8 6 4 2 0 2 4 6 8 10
0 5 10
20 TIME (S)
30
40
TIME (S)
10
10
FREQUENCY (Hz)
FREQUENCY (Hz)
Channel Separation
TOTAL HARMONIC DISTROTION ON (2) 1kHz (%) CHANNEL SEPARATION (dB) 140 120 100 80 60 40 20 0 10 VS = + 15V TA = 25oC 100 1K FREQUENCY (Hz) 10K 100k 6 5 4 3 2 1 0 1
10
100
1K FREQUENCY (Hz)
10K
100K
69