Professional Documents
Culture Documents
by Keith Troester
NOTE: This guide assumes you are using SDI video and embedded SDI
audio.
- OUTPUTTING TO TAPE
STRIPING A TAPE
Remove any deck inputs.
Press P1: HOME, then MENU.
o Item 710: Set to BLACK
o Item 808: Set to SILENCE
Press HOME, then TCG SET. Enter your start TC for striping by altering
digits with the MULTI-CONTROL knob, and pressing NEXT or PREV to
move between digits. When satisfied, press SET.
Rewind the tape. Press REC & PLAY at the same time until you’ve
striped to your liking.
Press HOME, then F1 – VIDEO IN so it reads SDI.
Press P4: AUD INP. Hold ALT/DELETE and press AUDIO SG so it is
OFF.
Press P2: TC. From top to bottom on the left:
o INTERNAL
o RGN:LTC
o REC RUN
o DF (varies)