Professional Documents
Culture Documents
Firdiyono Pusat Penelitian Metalurgi LIPI Komplek PUSPIPTEK, Cisauk, Tangerang INTI SARI
Bijih laterit nikel terdiri dari bijih serpentin dan bijih limonit. Bijih limonit banyak mengandung goethit sebagai hidrat besi. Proses hidrometalurgi terhadap bijih leterit nikel kadar rendah dapat dikelompokkan sebagai berikut: a. Pelarutan amoniak-amonium karbonat setelah pemanggangan reduksi selektif. b. Pelarutan dengan larutan asam sulfat encer setelah pemanggangan reduksi. Direncanakan pemanfaatan bijih limonit sebagai katalis pengganti besi, magnetit atau wustit yang diperoleh dari hasil proses reduksi bijih limonit. Selanjutnya substitusi antara unsur FeO dan nikel di dalam forsterit, dan pengendapan NiO dipermukaan mineral forsterit yang kemudian dilanjutkan dengan pelarutan asam sulfat. Tulisan ini merupakan gambaran percobaan terhadap campuran bijih serpentin dan bijih limonit dengan 2 tahap proses, yaitu proses pertama merupakan proses pembentukkan logam besi, magnetit atau wustit dari goethit dalam bijih limonit dengan menggunakan gas hidrogen atau hidrogen dan uap air sebagai gas reduksi. Proses tahap kedua adalah proses pemanggangan untuk substitusi antara unsur nikel dan besi oksida yang kemudian dilanjutkan dengan proses pelarutan NiO dengan larutan asam sulfat.
Kata kunci : Nikel laterit, Serpentin, Limonit, Magnetit, Wustit, Goethit, Forsterit, Enstantit, Pemanggangan, Pelarutan.
ABSTRACT
Nickel laterite ore will be composed of serpentinic and limonitic ores. Limonitic ore includes a plenty of goethite as iron hydrat. Hydrometallurgical processing for low grade nickel laterite ore can be classified as follows,, a. Ammonical-ammonium carbonate leaching after selective reduction. b. Diluted sulfuric acid leaching after reduction roasting. It was thought the utilization of magnetite-wustite which could be obtained from limonitic nickel ore by the reduction process as a Substitution catalizer of Metalurgi, Volume 21, No. 2, Desember 2006 Metalurgi, Volume 21, No. 2, Desember 2006
metallic iron. The substitution between FeO element and nickel element in forsterite, and then NiO is segregated on the surface of the forsterite mineral and finally leaching with the diluted sulfuric acid. This paper is a description of the experimental studies on two stage processes, namely first stage process, which is the formation of magnetite or wustite from goethite in the limonitic ore with the reduction gas such as hydrogen and/or hydrogen plus steam and secondary stage, which is the substitution roasting process between nickel elements and iron oxides and then leaching of NiO with the diluted sulfuric acid.
Kata Kunci : pemurnian larutan nikel khlorida, penghilangan ion besi, oksidasi dengan gas khlor ABSTRACT
In present work, the experiment to remove ionic ferrous from aqueous Nickel chloride solution has been done by a precipitation method. Experiments were caried out by using 2 litres capacities beaker glass the variables of experiment covering temperature from 30 o C to 50 o C, aqueous solution pH from pH = 2 to pH = 5 and reaction time from 5 minutes to 60 minutes. The result of experiment showed that the ferrous ions which could be removed from the aqueous nickel chloride solution increased if the pH and temperature of solution were increased. However, during the precipitation process of ferrous ions from the aqueous nickel chloride solution, the role of pH adjustment gave more dominant effect on the precipitation process compared to temperature adjustment.
PENGARUH PENAMBAHAN SERBUK SiC & Al2O3 TERHADAP SIFAT KEKERASAN MATERIAL BERBASIS TITANIUM
Oleh :
Gadang Priyotomo Pusat Penelitian Metalurgi LIPI Komplek PUSPIPTEK, Cisauk, Tangerang INTI SARI
Logam titanium mempunyai sifat material yang baik. Peningkatan sifat material khususnya nilai kekerasan dapat dilakukan melalui pengerjaan pengerasan terdispersi. Material yang digunakan yaitu SiC dan Al2O3. Proses peleburan menggunakan tungku induksi vakum. Penambahan 1%wt SiC dan 1%wt Al2O3 dilakukan ke dalam logam titanium murni. Nilai kekerasan Titanium murni 160 HVN, Ti-1%wt SiC 264,33 HVN dan Ti-1%wt Al2O3 221,75. Pengaruh peningkatan kekerasan dikarenakan adanya butiranbutiran precipitasi yang tersebar di seluruh matrik titanium. Ini juga dapat mempengaruhi terjadinya hambatan dislokasi di batas butir titanium.
Kata Kunci : Kobal, Bijih Tembaga, Bijih Nikel, Proses HPAL dan Proses Caron ABSTRACT
There was a change on the resources for cobalt production which formerly is as a by -product of copper ore to nickel laterite ore processing in 2000. There are also facts that the demand of cobalt tends to increase in the future. Therefore as a top rank country for nickel laterite resources, Indonesia has to considerate this situation in a strategy for the development of its nickel laterite ore.
Kata kunci : Titanium, Silikon, Karbida, Alumina, Methoda levitasi dan Matrik ABSTRACT
Titanium metal has good material properties. The increasing of material properties especially hardness value can be carried out through dispersed hardening process. Material that is done in this research is SiC and Al2O3. Melting process uses vacuum induction furnace. The addition of 1%wt SiC and 1%wt Al2O3 is done inside pure titanium. The hardness value of pure titanium is 160 HVN. The hardness values of Ti-1%wt SiC are 264, 33 HVN and 221, 75 HVN for Ti-1%wt Al2O3. The influence of increased hardness can be caused by precipitated grains that are spreaed in all of titanium matrix. This phenomenon also can influence the occurrence of dislocation barrier between grain boundaries of titanium.
Yusuf Pusat Penelitian Metalurgi LIPI Komplek PUSPIPTEK, Cisauk, Tangerang INTI SARI
Dengan meningkatnya harga gas alam dan pelet bijih besi berkualitas tinggi seperti dipersyaratkan oleh reaktor HyL3 PT Krakatau Steel, daya saing industri baja berbasis gas alam menjadi sangat lemah. Untuk mengganti proses dengan jalur tanur tiup yang cukup populer, juga dihadapi kendala dalam bentuk ketersediaan batubara kokas (coking coal). Indonesia yang di tahun 2005 lalu telah menghasilkan sekitar 150 juta ton batubara, layak mempertimbangkan proses pembuatan baja berbasis batubara. Tulisan ini membahas berbagai pilihan proses peleburan baja berbasis batubara non kokas, mulai dari proses berjalur reduksi langsung, proses berjalur peleburan langsung, maupuntanur tiup mini. Tanur tiup mini diikutsertakan dalam pilihan proses, karena dia tidak memerlukan kokas dengan kualitas metalurgi seperti yang dipersyaratkan oleh tanur tiup konvensional. Tanpa persyaratan yang berat ini, energi untuk tanur tiup mini bisa dipasok dengan kokas dari batubara lokal.