Professional Documents
Culture Documents
Page 1 of 1
Sitemap
Calculation
NL | EN | FR
Home
Products
About us
Service
Information
Contact
News
Steel grades - Sheet piles Hot rolled sections (except GU sections) Mechanical properties according to EN 10248-1:1995 and comparable international standards. Other steel grades can be delivered on request.
Standard referred to: EN 10248-1:1995 Minimum yield strength ReH N/mm2 S 240 GP S 270 GP S 320 GP S 355 GP S 390 GP S 430 GP S 460 AP* 240 270 320 355 390 430 460 Minimum tensile strength Rm N/mm2 340 410 440 480 490 510 550 Minimum elongation % 26 24 23 22 20 19 17 Comparable international standards USA ASTM Canada CSA G 4021 Japan JIS A 5528
Steel grade Steel grades Sheet piles Tubes HP piles AutoCad files Calculation Documentation
Gr. 260 W Gr. 300 W A 572 Gr. 50; A 690 Gr. 350 W A 572 Gr. 55 SY 390 A 572 Gr. 60 Gr. 400 W A 572 Gr. 65
A 328
Hot rolled GU sections Mechanical properties according to EN 10248-1:1995 and comparable international standards.
Standard referred to: EN 10248-1:1995 Minimum yield strength ReH N/mm2 S 240 GP S 270 GP S 320 GP S 355 GP 240 270 320 355 Minimum tensile strength Rm N/mm2 340 410 440 480 Minimum elongation % 26 24 23 22 Comparable international standards USA ASTM Canada CSA G 4021 Gr. 260 W Gr. 300 W Gr. 350 W
Steel grade
Cold formed sections Mechanical properties according to EN 10249-1:1995 and corresponding former national standards. Other steel grades can be delivered on request.
Standard referred to: EN 10249-1:1995 Steel grade S 235 JRC S 275 JRC S 355 JOC Minimum yield strength ReH N/mm2 235 275 355 Minimum Tensile strength Rm N/mm2 340-470 410-560 490-630 Minimum elongation F % 26 22 22 E 24-2 St 37.2 40 B AE 235-B E 28-2 St 44.2 43 B AE 275-B E 36-3 St 52.3 U 50 C AE 355-C D GB B Former references
The C in JRC and J0C stands for cold forming aptitude according to EN 10025:1993.
Disclaimer
http://www.arcelorprojects.com/EN/steel_grades1.htm
6/21/2009