Dexin Su-440l is a polyether polyol based on sucrose with an average functionality of 4.42. It is a general purpose polyol that can be used to manufacture various rigid foams. Typical properties include a yellow viscous liquid appearance, 425-455 mgKOH/g OH number, 0.20% water content, and 4800-6200 mPa.s/25 viscosity. Storage requires dry nitrogen or low dew point air and drums should be kept tightly closed to prevent contamination, with a recommended temperature range of 10-40 degrees. While toxicity has not been specifically evaluated, polyols generally present minimal hazards with low acute oral toxicity and no significant inhalation hazard, though
Dexin Su-440l is a polyether polyol based on sucrose with an average functionality of 4.42. It is a general purpose polyol that can be used to manufacture various rigid foams. Typical properties include a yellow viscous liquid appearance, 425-455 mgKOH/g OH number, 0.20% water content, and 4800-6200 mPa.s/25 viscosity. Storage requires dry nitrogen or low dew point air and drums should be kept tightly closed to prevent contamination, with a recommended temperature range of 10-40 degrees. While toxicity has not been specifically evaluated, polyols generally present minimal hazards with low acute oral toxicity and no significant inhalation hazard, though
Dexin Su-440l is a polyether polyol based on sucrose with an average functionality of 4.42. It is a general purpose polyol that can be used to manufacture various rigid foams. Typical properties include a yellow viscous liquid appearance, 425-455 mgKOH/g OH number, 0.20% water content, and 4800-6200 mPa.s/25 viscosity. Storage requires dry nitrogen or low dew point air and drums should be kept tightly closed to prevent contamination, with a recommended temperature range of 10-40 degrees. While toxicity has not been specifically evaluated, polyols generally present minimal hazards with low acute oral toxicity and no significant inhalation hazard, though
Dexin Su-440l is a polyether polyol based on sucrose with avg. functionality of 4.42.Su-440l is a general purpose based polyether polyol , which can be used in the manufacture of various rigid foam.
Typical Properties:
Appearance Yellow viscous liquid OH Number 425-455 MgKOH/g Acid Number 0.20 MgKOH/g Water Content 0.20 % Viscosity 4800-6200 Mpa.s/25 Color 8 Gardner
Storage & Handling: Su-440l is hygroscopic, and dry nitrogen or low dew point air is recommended for tank padding. Drums should be kept tightly to prevent contamination. The recommended storage temperature is 10-40.
Toxicological Properties: Dexin Su-440l has not been specifically evaluated for their toxicological properties. However, the similarity of these products to others, about which health hazard data is available, provides assurance that they represent minimum hazard. Polyols are very low in acute oral toxicity. Because of their low vapor pressure, polyols present no significant inhalation hazard. These materials generally are not irritants to the skin but can cause mild irritation to the eyes. More detailed safety, health and environmental information related to the proper use. Handling and disposal of these products is available from the material safety data sheet. Please request one from our salesman and make your employees and customers aware of any potential hazards which they may encounter as a result of their contact with these products.