You are on page 1of 47

CE 5510 - 2004

CE 5510 Advanced Structural Concrete Design

CE 5510 - 2004

Slender Column Design


Braced Slender Column Design Moments Unbraced Slender Columns Adjustments to Additional Moments

CE 5510 - 2004

Class Objectives
Explain the effect of second order moments on axial force-moment interaction diagram Identify a column as slender (or not) Slender means that slenderness effects are to be considered as per code of practice. Determine the design moments for a slender column.

CE 5510 - 2004

Recommended Reading
James G. MacGregor, REINFORCED CONCRETE:

Mechanics and Design, 3rd Ed., Prentice-Hall, 1997, Ch. 12. Allen, A. H., REINFORCED CONCRETE DESIGN TO BS8110 SIMPLY EXPLAINED, E&FN Spon, London 1988, Ch. 11 David A. Fanella, Time-saving design aids for reinforced concrete, Part 3: Column and walls, STRUCTURAL ENGINEER, November 2001, pp 42-47.
The next few slides are from the Reinforced Concrete Council

CE 5510 - 2004

Introduction

CE 5510 - 2004

CE 5510 - 2004

N M Relationship (BS 8110)

CE 5510 - 2004

N M Relationship (BS 8110)


Do you know why you can design for flexure only if the axial force is less than 0.1 fcuAc ?

CE 5510 - 2004

Design Charts for symmetrically reinforced rectangular cross-sections

CE 5510 - 2004

What is Buckling?

CE 5510 - 2004

What is buckling?

CE 5510 - 2004

What is Buckling?

CE 5510 - 2004

Slenderness Effects in Structures

CE 5510 - 2004

Classification of Structures

CE 5510 - 2004

Effective Length

CE 5510 - 2004

Effective Length

CE 5510 - 2004

Effective Length

CE 5510 - 2004

Effective Length (BS 8110)

CE 5510 - 2004

Effective Length

CE 5510 - 2004

Slenderness Ratio

CE 5510 - 2004

Slenderness Ratio

Bending and Axial Load

CE 5510 - 2004

Design Methods

CE 5510 - 2004

Design Methods

course

This is covered in detail later.

CE 5510 - 2004

Simplified Design Method

CE 5510 - 2004

Simplified Design Method

CE 5510 - 2004

Simplified Design Method

CE 5510 - 2004

Braced

CE 5510 - 2004

Simplified Design Method

CE 5510 - 2004

Simplified Design Method

CE 5510 - 2004

Simplified Design Method

CE 5510 - 2004

Bending about Both Axes

CE 5510 - 2004

Bending about Both Axes

CE 5510 - 2004

Bending about Both Axes

CE 5510 - 2004

Example: Calculate the area of steel required in the braced column

CE 5510 - 2004

CE 5510 - 2004

CE 5510 - 2004

CE 5510 - 2004

CE 5510 - 2004

CE 5510 - 2004

Example A. H. Allen, pp 113-115

CE 5510 - 2004

Example: Slender Braced Column (Allen)

CE 5510 - 2004

CE 5510 - 2004

CE 5510 - 2004

CE 5510 - 2004

CE 5510 - 2004

BS 8110 : 1985

CE 5510 - 2004

Slender Beams

You might also like