Professional Documents
Culture Documents
=
Application K
t
Horizontal KO drum 0.25 fps
v
t
= terminal settling velocity (m/s)
=liquid density (kg/m
3
)
Vertical KO drum without
demister
0.15 fps
Vertical KO drum with
0 25 fps
t
= liquid density (kg/m
3
)
v
= vapour density (kg/m
3
)
D
p
= droplet diameter (m)
g =gravitational constant (9 81
demister
0.25 fps
Flare KO drum (essentially
dry vapor)
0.75 fps
g = gravitational constant (9.81
m/s
2
)
C = dimensionless drag coefficient
K
t
=separation factor, or gas
dry vapor)
Flare KO drum (wet vapor) 0.33 fps
System with have foaming
K
t
separation factor, or gas
handling capacity (m/s)
tendency (glycol or amine
solution)
0.75 fps
Compressor suction
0 75 fps
7
knockout drums
0.75 fps
2 Tinggi Vesel 2. Tinggi Vesel
2.1 LLL =0.2 m, for instrument 150 mm, and level instrument 50 mm
Service Hold-up(min)
2.1 LLL 0.2 m, for instrument 150 mm, and level instrument 50 mm
2.2. Liquid holdup = HLL-LLL
Feed to distillation column, reactor, heater 5-15
Reflux vessel 3-5
Fl KO d 20 30 Flare KO drum 20-30
Condensate Flash drum 3-5
2 3 J arak antara HLL dengan inlet nozzle =0 3 x D atau minimum0 3 m 2.3. J arak antara HLL dengan inlet nozzle 0.3 x D, atau minimum 0.3 m
2.4 Diameter inlet nozzle (lihat sub bab 3)
2.5 J arak antara inlet device dan TTL
T d i t j k 0 7D( t i i l 0 9 ) a. Tanpa demister, jarak = 0.7D (atau minimal 0.9 m)
b. Dengan demister,
- jarak = 0.45D (atau minimal 0.9 m)
plus 0 1 muntuk demister
8
- plus 0.1 m untuk demister
- plus dari demister ke TTL = 0.15D (atau minimal 0.15 m)
3 Diameter Nozel 3. Diameter Nozel
3 1 Di t i l t l d d th i l t d i d d th i l t fl 3.1 Diameter inlet nozzle, depend on the inlet device depends on the inlet flow
and on the type of inlet device
No inlet device:
m
x v
m
2
= 1000
m m
With inlet device:
m
x v
m
2
= 1500
m
= the density of mixture (M
G
+M
L
)/(Q
G
+Q
L
) (kg/m
3
)
m G L G L
v
m
= the density of mixture (Q
G
+Q
L
)/(1/4D
2
) (m/s)
3.2 Vapour outlet nozzle
G
x v
G
2
= 3750
=the vapour density (kg/m
3
)
G
= the vapour density (kg/m
3
)
v
G
= the vapour velocity (m/s)
3 3 Di t li id tl t b i 1 /
9
3.3 Diameter liquid outlet , basis v = 1m/s
Mist Eliminator (demister pad) Mist Eliminator (demister pad)
Mist eliminator diperlukan jika dalamproses ada butiran cairan yg Mist eliminator diperlukan jika dalam proses ada butiran cairan yg
harus dipisahkan dari aliran uap.
KO drumyang tanpa dilengkapi Mist eliminator akan memisahkan KO drum yang tanpa dilengkapi Mist eliminator akan memisahkan
butiran yang lebih besar dari 389 micron oleh gaya gravitasi.
Umumnya gaya gravitasi akan memisahkan lebih dari 90% cairan
umpan. Oleh karena itu, sisa butiran (droplet) yang memiliki ukuran p , ( p ) y g
dibawah 300 micron dapat menimbulkan masalah besar untuk unit
proses selanjutnya.
Mist eliminator yang berada di bagian atas KO drum akan
menghilangkan sisa droplet sampai diameter 6 micron atau
dibawahnya, tergantung pada tipe mist eliminator. KO drum dengan
mist eliminator dapat mencapai efisiensi overall 99 99%pemisahan mist eliminator dapat mencapai efisiensi overall 99.99% pemisahan.
10