You are on page 1of 15

EXPORT

The term "export" is derived from the conceptual meaning as to ship the goods and services out
of the port of a country. The seller of such goods and services is referred to an "exporter" who
is based in the country of export whereas the overseas based buyers referred to as an
"importer". In International Trade, "exports" refers to selling goods and services produced in
home country to other markets.

In economics, an export is any good or commodity, transported from one country to another
country in a legitimate fashion, typically for use in trade. Export goods or services are provided
to foreign consumers by domestic producers.

Export of commercial quantities of goods normally requires involvement of the customs


authorities in both the country of export and the country of import. The advent of small trades
over the internet such as through Amazon and e-Bay have largely bypassed the involvement of
Customs in many countries because of the low individual values of these trades. Nonetheless,
these small exports are still subject to legal restrictions applied by the country of export. An
export's counterpart is an import.

The definition of Export is when you trade something out of the country. In economics, an
export is any good or commodity, transported from one country to another country in a
legitimate fashion, typically for use in trade.

Barriers to Export
Trade barriers are generally defined as government laws, regulations, policy, or practices that
either protect domestic products from foreign competition or artificially stimulate exports of
particular domestic products. While restrictive business practices sometimes have a similar
effect, they are not usually regarded as trade barriers. The most common foreign trade barriers
are government-imposed measures and policies that restrict, prevent, or impede the
international exchange of goods and services.
Advantages of exporting
Ownership advantages are the firm's specific assets, international experience, and the ability to
develop either low-cost or differentiated products within the contacts of its value chain. The
locational advantages of a particular market are a combination of market potential and
investment risk. Internationalization advantages are the benefits of retaining a core competence
within the company and threading it though the value chain rather than obtain to license,
outsource, or sell it. In relation to the Eclectic paradigm, companies that have low levels of
ownership advantages either do not enter foreign markets. If the company and its products are
equipped with ownership advantage and internalization advantage, they enter through low-risk
modes such as exporting. Exporting requires significantly lower level of investment than other
modes of international expansion, such as FDI. As you might expect, the lower risk of export
typically results in a lower rate of return on sales than possible though other modes of
international business. In other words, the usual return on export sales may not be tremendous,
but neither is the risk. Exporting allows managers to exercise operation control but does not
provide them the option to exercise as much marketing control. An exporter usually resides far
from the end consumer and often enlists various intermediaries to manage marketing activities.

Disadvantages of exporting
For Small-and-Medium Enterprises (SME) with less than 250 employees, selling goods and
services to foreign markets seems to be more difficult than serving the domestic market. The
lack of knowledge for trade regulations, cultural differences, different languages and foreign-
exchange situations as well as the strain of resources and staff interact like a block for
exporting. Indeed there are some SME's which are exporting, but nearly two-third of them sells
in only to one foreign market. The following assumption shows the main disadvantages:
Financial management effort: To minimize the risk of exchange-rate fluctuation and
transactions processes of export activity the financial management needs more capacity
to cope the major effort
Customer demand: International customers demand more services from their vendor like
installation and startup of equipment, maintenance or more delivery services.
Communication technologies improvement: The improvement of communication
technologies in recent years enable the customer to interact with more suppliers while
receiving more information and cheaper communications cost at the same time like 20
years ago. This leads to more transparency. The vendor is in duty to follow the real-time
demand and to submit all transaction details.
Management mistakes: The management might tap in some of the organizational
pitfalls, like poor selection of oversea agents or distributors or chaotic global
organization.
IMPORT
The term "import" is derived from the conceptual meaning as to bring in the goods and services
into the port of a country. The buyer of such goods and services is refered to an "importer" who
is based in the country of import whereas the overseas based seller is refered to as an
"exporter". Thus an import is any good (e.g. a commodity) or service brought in from one
country to another country in a legitimate fashion, typically for use in trade. It is a good that is
brought in from another country for sale. Import goods or services are provided to domestic
consumers by foreign producers. An import in the receiving country is an export to the sending
country.
Imports, along with exports, form the basis of international trade. Import of goods normally
requires involvement of the customs authorities in both the country of import and the country
of export and are often subject to import quotas, tariffs and trade agreements. When the
"imports" are the set of goods and services imported, "Imports" also means the economic value
of all goods and services that are imported. The macroeconomic variable usually stands for the
value of these imports over a given period of time, usually one year.
Export and Import Documents
Documents are used to be prepared before the shipments of goods while some others are
required while completing customs formalities. In addition, some documents are issued by the
shipping company. All such documents are useful for completing the procedure of exporting
and are called Shipping Documents. The purposes of preparing these documents are:
Declaration of export as per exchange control regulation: In the Statutory Control
every exporter has to submit the declaration on specified form supported by evidence as
and when required.
Transportation of goods
Customs clearance of goods
Any other purpose.
Aligned Documentation System (ADS)
In India since 1991 new standardized documents are introduce by the government under
Aligned Documentation System (ADS). This new system is based on the UN layout key.
Exporter should use such standard forms while preparing various export documents. This gives
convenience to all concerned parties. Moreover, such standard forms are now used in more
than hundred countries. ADS have simplified export documentation procedure.
Objectives of ADS:
The main objective of ADS is to provide benefits to every party associated with international
trade. Documents pertaining to export trade are printed on uniform length and standard A-4
size of paper. Initially, information is entered in master document 1 and master document 2.
From this documents, common information required to be incorporated in all the relative
documents, is entered in this lots at the same locations. With the help of master document 1, an
exporter can developed 14 out of 16 commercial documents. The 2 commercial documents that
are not developed because they have not been standardized include Bills of Exchange and
Shipping Order. ADS facilitate easy entry of data and enables quick reading. Adoption of ADS
simplifies trade documentation on the global level thereby helping all parties involved in the
trade.
Advantages of ADS:
1) Uniformity of documents: The preparation of commercial and regulatory documents is
made easier when Master document have been updated. The documents are aligned to
one another. Moreover, all the documents are printed in the same size of paper. The
common items information on documents have uniform positioning e.g., signatures at
bottom right, references top right, shipper top left, etc.
2) Element of convenience: ADS has made it simpler and convenient to complete and
process export-import documents. It is possible to use the Master documents as common
positions are used for data items. Using a photocopier it is possible to prepare a large
number of documents.
3) Overall benefits: When documents comply with UN alignment standard, it expedites the
realization of payments on export bills. Documents are processed quickly, cost is
reduced & mistakes are removed.
4) Improving efficiency: When ADS is adopted by export firms it certainly improves the
corporate image as the office efficiency multiplies. It is very simple to check alignment
documents. Office staff dealing with export documents learns about the details in
various documents without difficulty. Their training on the job becomes simplified.
5) Computer – aid: Computerized export documentation has helped parties all over the
worlds to carry their business with ease, convenience and without errors. Banking
formalities has been made uniform & simple. Another area of improvement includes
transport.

Paper size & specifications:

Paper A4
Size Length 297 mm
Width 210 mm
Margins Top 10 mm
Left 20 mm
Right 6 mm
Bottom 7 mm

Classification of documents:
ADS has classified documents into two categories viz.,
1) Commercial Documents.
2) Regulatory Documents.
Commercial Documents: These documents need to be prepared in order to help export-import
trade. Out of 16 commercial documents, 14 documents have been standardized and aligned
with one another. Commercial documents have the following objectives:
A) To facilitate transfer of title of goods and property from the exporter to the importer.
B) To ensure safe transfer of goods from the country of the exporter to the country of the
importer.
C) To help the exporters to realize payments without problem & delay.

Commercial documents include commercial invoice, certificate of origin, bill of lading,


certificate of inspection, etc.
Regulatory Documents: Regulatory documents are needed under the law as they are
prescribed by various government departments and bodies covering foreign exchange
regulations, export inspection, custom formalities etc. Out of regulatory documents 4 have been
standardized. Common regulatory documents are Form GR, Shipping Bill, ARE 1 Form, etc.
Export Documents
INVOICE CERTIFICATE CUSTOMS TRANSPORT EXCHANGE PAYMENT MISCELLANEOUS
DOCUMENTS DOCUMENTS CONTROL DOCUMENTS DOCUMENTS
DOCUMENTS

1.Proforma 4.Certificate of 6.Shipping Bill 7.Mate Receipt 10.GR Form 12.Bill of 13.Marine Insurance
Invoice Origin Exchange Policy
8.Bill Of Lading 11.PP Form
2.Commercial 5.Combined 14.Insurance
9.Airway Bill
Invoice certificate of Certificate
Origin and Value
3.Consular Invoice 15.Health
Certificate

A. Invoice
1) Proforma Invoice:
A proforma invoice is a quote in an invoice format that may be required by the buyer to apply
for an import license, contract for pre-shipment inspection, open a letter of credit or arrange for
transfer of hard currency.
A proforma may not be a required shipping document, but it can provide detailed information
that buyers need in order to legally import the product.
Proforma invoices basically contain much of the same information as the formal quotation, and
in many cases can be used in place of one. It should give the buyer as much information about
the order as possible so arrangements can be made efficiently. The invoices inform the buyer
and the appropriate import government authorities details of the future shipment; changes
should not be made without the buyer’s consent.

As mentioned for the quotation, the points to be included in the proforma are:
1. Seller’s name and address
2. Buyer’s name and address
3. Buyer’s reference
4. Items quoted
5. Prices of items: per unit and extended totals
6. Weights and dimensions of quoted products
7. Discounts, if applicable
8. Terms of sale or Incoterm used (include delivery point)
9. Terms of payment
10. Estimated shipping date
11. Validity date

For example, country A does not require person X to have a visa before entering the country
but person X is in country B which requires a visa from country A in order to allow X to
depart. In that case country A may issue a pro-forma visa to X, meaning the only object of the
visa is to satisfy the formal requirement for X to have a visa and not any real requirement by
country A.
2) Commercial Invoice:
A commercial invoice is document used in foreign trade. It is used as a customs declaration
provided by the person or corporation that is exporting an item across international borders.
Although there is no standard format, the document must include a few specific pieces of
information such as the parties involved in the shipping transaction, the goods being
transported, the country of manufacture, and the Harmonized System codes for those goods. A
commercial invoice must also include a statement certifying that the invoice is true, and a
signature. A commercial invoice is primarily used to calculate tariffs.

3) Consular Invoice:
Certification by a consular or government official covering an international shipment of goods.
A consular invoice, obtained from the consul of the importing country at the point of shipment,
insures that the exporter's trade papers are in order and the goods being shipped do not violate
any laws or trade restrictions.

B. Certificate
4) Certificate Of Origin:
A Certificate of Origin (often abbreviated to CO or COO) is a document used in international
trade. It traditionally states from what country the shipped goods originate, but "originate" in a
CO does not mean the country the goods are shipped from, but the country where their goods
are actually made. This raises a definition problem in cases where less than 100% of the raw
materials and processes and added value are not all from one country. An often used practice is
that if more than 50% of the sales price of the goods originate from one country, that country is
acceptable as the country of origin (then the "national content" is more than 50%). In various
international agreements, other percentages of national content are acceptable.

5) Combined Certificate of Origin And Value:


This Document is applicable to commonwealth countries only. This document certifies not only
the origin of goods but also the value of goods.

C. Customs Documents
6) Shipping Bill:
It is the main custom document. It is required by the custom authorities for granting permission
for the shipment of goods.
Shipping Bill/ Bill of Export is the main document required by the Customs Authority for
allowing shipment. Usually the Shipping Bill is of four types and the major distinction lies
with regard to the goods being subject to certain conditions which are mentioned below:
• Export duty/ cess
• Free of duty/ cess
• Entitlement of duty drawback
• Entitlement of credit of duty under DEPB Scheme
• Re-export of imported goods

The following are the documents required for the processing of the Shipping Bill:
• GR forms (in duplicate) for shipment to all the countries.
• 4 copies of the packing list mentioning the contents, quantity, gross and net weight of
each package.
• 4 copies of invoices which contains all relevant particulars like number of packages,
quantity, unit rate, total f.o.b./ c.i.f. value, correct & full description of goods etc.
• Contract, L/C, Purchase Order of the overseas buyer.
• AR4 (both original and duplicate) and invoice.
• Inspection/ Examination Certificate.
The formats presented for the Shipping Bill are as given below:
• White Shipping Bill in triplicate for export of duty free of goods.
• Green Shipping Bill in quadruplicate for the export of goods which are under claim for
duty drawback.
• Yellow Shipping Bill in triplicate for the export of dutiable goods.
• Blue Shipping Bill in 7 copies for exports under the DEPB scheme.
Note: - For the goods which are cleared by Land Customs, Bill of Export (also of 4 types -
white, green, yellow & pink) is required instead of Shipping Bill.

D. Transport Documents
1) Mate Receipt:
A declaration issued by an officer of a vessel stating that certain goods have been received on
board his vessel. An archaic practice. An acknowledgement of cargo receipt signed by a mate
of the vessel. The possessor of the mate's receipt is entitled to the bill of lading, in exchange
for that receipt.

2) Bill of Lading:
A bill of lading (sometimes referred to as a BOL, or B/L) is a document issued by a carrier to
a shipper, acknowledging that specified goods have been received on board as cargo for
conveyance to a named place for delivery to the consignee who is usually identified. A through
bill of lading involves the use of at least two different modes of transport from road, rail, air,
and sea. The term derives from the verb "to lade" which means to load a cargo onto a ship or
other form of transportation.
A bill of lading can be used as a traded object. The standard short form bill of lading is
evidence of the contract of carriage of goods and it serves a number of purposes:
• It is evidence that a valid contract of carriage, or a chartering contract, exists, and it may
incorporate the full terms of the contract between the consignor and the carrier by
reference (i.e. the short form simply refers to the main contract as an existing document,
whereas the long form of a bill of lading (connaissement intégral) issued by the carrier
sets out all the terms of the contract of carriage);
• It is a receipt signed by the carrier confirming whether goods matching the contract
description have been received in good condition (a bill will be described as clean if the
goods have been received on board in apparent good condition and stowed ready for
transport); and
• It is also a document of transfer, being freely transferable but not a negotiable
instrument in the legal sense, i.e. it governs all the legal aspects of physical carriage,
and, like a cheque or other negotiable instrument, it may be endorsed affecting
ownership of the goods actually being carried. This matches everyday experience in that
the contract a person might make with a commercial carrier like FedEx for mostly
airway parcels, is separate from any contract for the sale of the goods to be carried,
however it binds the carrier to its terms, irrespectively of who the actual holder of the
B/L, and owner of the goods, may be at a specific moment.
Types of Bill of Lading
Straight bill of lading: This bill states that the goods are consigned to a specified person and it
is not negotiable free from existing equities, i.e. any endorsee acquires no better rights than
those held by the endorser. So, for example, if the carrier or another holds a lien over the goods
as security for unpaid debts, the endorsee is bound by the lien. Although, if the endorser
wrongfully failed to disclose the charge, the endorsee will have a right to claim damages for
failing to transfer an unencumbered title. Also known as a non-negotiable bill of lading; and
from the banker's point of view this type of bill of lading is not safe.
Order bill of lading: This bill uses express words to make the bill negotiable, e.g. it states that
delivery is to be made to the further order of the consignee using words such as "delivery to A
Ltd. or to order or assigns". Consequently, it can be endorsed by A Ltd. or the right to take
delivery can be transferred by physical delivery of the bill accompanied by adequate evidence
of A Limited’s intention to transfer.

Bearer bill of lading: This bill states that delivery shall be made to whosoever holds the bill.
Such bill may be created explicitly or it is an order bill that fails to nominate the consignee
whether in its original form or through an endorsement in blank. A bearer bill can be negotiated
by physical delivery.

Surrender bill of lading: Under a term import documentary credit the bank releases the
documents on receipt from the negotiating bank but the importer does not pay the bank until
the maturity of the draft under the relative credit. This direct liability is called Surrender Bill of
Lading (SBL), i.e. when we hand over the bill of lading we surrender title to the goods and our
power of sale over the goods.

1) Airway Bill:
Air Waybill (AWB) or air consignment note refers to a receipt issued by an international
courier company for goods and an evidence of the contract of carriage, but it is not a document
of title to the goods. Hence, the AWB is non-negotiable. The AWB has a tracking number
which can be used to check the status of delivery, and current position of the shipment. The
number consists of a three digits airline prefix issued by IATA and an 8 digit number.

The first three copies are classified as originals. The first copy is retained by the issuing carrier
or their appointed agent. The 2nd copy by the receiving carrier or their appointed agent. The
3rd copy is used as Proof Of Delivery (POD). The goods in the air consignment are consigned
directly to the party (the consignee) named in the letter of credit (L/C). Unless the goods are
consigned to a third party like the issuing bank, the importer can obtain the goods from the
carrier at destination without paying the issuing bank or the consignor. Therefore, unless a cash
payment has been received by the exporter or the buyer's integrity is unquestionable;
consigning goods directly to the importer is risky.

For air consignment to certain destinations, it is possible to arrange payment on a COD (cash
on delivery) basis and consign the goods directly to the importer. The goods are released to the
importer only after the importer makes the payment and complies with the instructions in the
AWB. The AWB must indicate that the goods have been accepted for carriage, and it must be
signed or authenticated by the carrier or the named agent for or on behalf of the carrier.

E. EXCHANGE CONTROL DOCUMENTS


2) GR FORM:
It is an exchange control document which is to be submitted to the RBI after clearance from the
customs authorities. It is designed mainly to furnished guarantee to the RBI to remit the foreign
exchange earned from the export shipment within 180 days from the date of export.

3) PP FORM:
It is also an exchange control document. It is used in place of form GR when goods are
exported by post parcel.

F. PAYMENT DOCUMENTS
12) Bill of exchange:
A bill of exchange or "draft" is a written order by the drawer to the drawee to pay money to the
payee. A common type of bill of exchange is the cheque, defined as a bill of exchange drawn
on a banker and payable on demand. Bills of exchange are used primarily in international trade,
and are written orders by one person to his bank to pay the bearer a specific sum on a specific
date. Prior to the advent of paper currency, bills of exchange were a common means of
exchange. They are not used as often today.

A bill of exchange is an unconditional order in writing addressed by one person to another,


signed by the person giving it, requiring the person to whom it is addressed to pay on demand
or at fixed or determinable future time a sum certain in money to order or to bearer. It is
essentially an order made by one person to another to pay money to a third person. A bill of
exchange requires in its inception three parties--the drawer, the drawee, and the payee.

The person who draws the bill is called the drawer. He gives the order to pay money to third
party. The party upon whom the bill is drawn is called the drawee. He is the person to whom
the bill is addressed and who is ordered to pay. He becomes an acceptor when he indicates his
willingness to pay the bill. The party in whose favor the bill is drawn or is payable is called the
payee. The parties need not all be distinct persons. Thus, the drawer may draw on himself
payable to his own order.

A bill of exchange may be endorsed by the payee in favour of a third party, who may in turn
endorse it to a fourth, and so on indefinitely. The "holder in due course" may claim the amount
of the bill against the drawee and all previous endorsers, regardless of any counterclaims that
may have disabled the previous payee or endorser from doing so. This is what is meant by
saying that a bill is negotiable. In some cases a bill is marked "not negotiable". In that case it
can still be transferred to a third party, but the third party can have no better right than the
transferor.

G. MISCELLANEOUS DOCUMENTS
13) MARINE INSURANCE:
Marine Insurance covers the loss or damage of ships, cargo, terminals, and any transport or
property by which cargo is transferred, acquired, or held between the points of origin and final
destination.
Cargo insurance—discussed here—is a sub-branch of marine insurance, though Marine also
includes Onshore and Offshore exposed property (container terminals, ports, oil platforms,
pipelines); Hull; Marine Casualty; and Marine Liability.

14) Certificate of Insurance:


A document issued by an insurance company/broker that is used to verify the existence of
insurance coverage under specific conditions granted to listed individuals. More specifically,
the document lists the effective date of the policy, the type of insurance coverage purchased,
and the types and dollar amount of applicable liability.

A certificate of insurance is often demanded in situations where liability and large losses are a
concern. For example, a company wishes to hire a driver from a temp agency. The company
will most likely ask the agency to show them a certificate of insurance that proves that certain
liabilities will be covered by insurance in the event the driver causes problems, such as
incurring damages from driving the company’s vehicles.

15) HEALTH CERTIFICATE:


It is required for export of food products, seeds, animal meat products, etc. This certificate is
issued by the health department of the exporting country certifying that these items are free
from infection and contamination.

IMPORT DOCUMENTS

1. BILL OF ENTRY:
A bill of entry is a formal declaration describing goods which are being imported or exported.
The bill of entry is examined by customs officials to confirm that the contents of a shipment
conform to the law, and to determine which taxes, tariffs, and restrictions may apply to the
shipment. This document must be prepared by the importer or exporter, with many companies
hiring a clerk specifically to handle the process of preparing bills of entry.
A typical bill of entry includes a description of the goods in the shipment, including details and
the quantity of the goods, along with an estimate of their value. Customs officials reserve the
right to inspect the shipment to determine whether or not it is consistent with the bill of entry,
and discrepancies can be grounds for legal proceedings. Once a bill of entry has been reviewed
and the shipment has been inspected, it can be cleared for sale or transfer. If there is a problem,
customs may opt to confiscate the goods.
Many nations have specific laws about how bills of entry should be formatted and presented. It
is important to have accurate documentation, or goods can be held up in customs. This can
cause an inconvenience in some cases, and spoilage or destruction of the goods in others; a
shipment of fruit, for example, will not hold up through a lengthy retention by customs while
details of the shipment are worked out.
In addition to a bill of entry, goods may also need additional supporting paperwork. Works of
art, for example, may need to be accompanied by certificates of provenance. Archaeological
artifacts also need to be accompanied by paperwork indicating that their release has been
approved by the government, and describing the purpose for which the artifacts are being
moved across international borders. This is designed to prevent the illegal sale and trade in
priceless cultural artifacts.
Companies keep copies of their bills of entry on record as part of their financial paperwork;
they need to be able to track the movement of shipments. These forms are also used by customs
officials to track the type of goods being moved over their borders, and in the case of objects
with import and export quotas, to make sure that these quotas are not exceeded. This paperwork
is also used in the preparation of statistics which are designed to shed light on a nation's
economic health and trade balance with other nations.

2. CERTIFICATE OF INSPECTION:
Inspection report or report of findings is required by some importers and/or importing
countries. Please see the sample Inspection Report. The export-trader uses such a report in the
inspection of goods purchased from a manufacturer. The export-manufacturer also uses such a
report in the inspection of its own productions.
In case an inspection certificate is required, the importer may stipulate in the letter of credit
(L/C) to use a specific independent surveyor.
In the case of a foreign government required pre-shipment inspection, which is stipulated in the
L/C, the report of findings can be in the form of a security label attached on the invoice. The
label bears the number and date of the corresponding report of findings issued by the foreign
government engaged surveyor.

3. CERTIFICATE OF MEASUREMENT:
There are two ways how freight can be charged i.e. on the basis of weight or measurement.
When freight is charged on the basis of weight, the weight declared by the exporter is accepted.
However, the exporter can obtain certificate of measurement either from the Indian chamber of
commerce or any other approved organization and submitted to the shipping company for
calculation of applicable freight. The certificate contains detail like name of the vessel, port of
destination, description of goods, length, breadth, quantity, depth, etc. of the packages.

4. FREIGHT DECLARATION:
When the importer agrees to pay the freight or the overseas supplier pays the freight; in both
the cases freight declaration is needed from the overseas supplier.

5. FUMIGATION CERTIFICATE:
In order to ensure safety against spread of harmful virus importer insist on fumigation
certificate where the cargo includes plants & weeds. Unless his certificate is provided the cargo
will not be allowed to enter into their countries. The exporter is responsible to carry out
fumigation & also obtain a certificate from the prescribed agency. Serious complications will
arise in the certificate from the exporter. The certificate will enable importers easy clearance of
goods.

You might also like