Professional Documents
Culture Documents
Let's take oxygen which has a spectral response at a wavelength of 760 nm. With
mechanical vibration (sound) which propagate at 1493 m/s in water and 340 m/s in
air: i.e. for oxygen, frequency=velocity/lambda, so a mechanical vibration of 1.964G
cps would be needed to have its outer shell dissociate from the hydrogen atom. The
lower octave note would be close to B flat fifth octave. For hydrogen the first red
bar at 656 nm would need a vibration of 2.276G cps, which is close to the D flat 6th
octave.
Two ways could be considered to achieve this vibration rate: As Keely did, sample
of matter was positioned in the middle of a resonant cavity which was excited to
higher octave with low octave sound wave. Or maybe a longitudinal electric wave
which would be easier to produce at higher cycling rate aimed at the same cavity or
applied on the bulk material to dissociate with electrode or by induction, resonant
cavity being the preferred method.
Benoit Léveillé
monamiben@gmail.com
May 8, 2008