Professional Documents
Culture Documents
Women
A Seminar Report On
i7 Processor
Academic Session
2006-2010
Branch: Information Technology
Submitted To: Submitted
By:
Ms. Saumya Bajpai Ms. Disha
Goyal
The Intel i7 Processor
LIST OF AREAS
I7 Processor – An Introduction
About Processor
Types Of Processors
Types Of Platforms
Operation Of Processor
Performance Of Processor
Ram Vs Processor
I5 Processor Vs I7 Processor
Conclusive Report
Works Cited
i7 PROCESSOR: AN INTRODUCTION
Product Overview:
Intel Core i7 is Intel's brand name for several families of desktop and laptop 64-
bit x86-64 processors using the Intel Nehalem micro architecture. It is a
successor to the Intel Core 2 brand. The Core i7 identifier was first applied to
the initial family of processors codenamed Bloomfield introduced in 2008. In
2009 the name was applied to Lynnfield and Clarkefield models. Prior to 2010,
all models re quad-core processors. In 2010, the name was applied to dual-core
Arran dale models, and the Gulf town Core i7-980X Extreme processor which
has six hyper threaded cores.
Launch of i7
Processor:
Product information:
Intel officially unveiled all details regarding its Core i3, Core i5 and Core i7
Mobile as ll as Desktop processors in CES 2010. The introduction of new chips
coincides with the arrival of Intel’s new 32 nm architecture, manufacturing
process and integration high-definition graphics inside the processor. It is the
successor of the 45 nm architecture.
Intel is expecting good results from better-integrated graphics of the Core i3 and
i5 processors, as the sales in the last two years re rather flat. The new “Arran
dale” graphics technology has 20% more shades which is an important
component for 3D graphics, Intel senior vice president Sean Maloney said. Intel
claims that the graphics performance is roughly 70% better than the integrated
graphics in the current Core 2 Duo.
ABOUT PROCESSOR
The Central Processing Unit (CPU) or the processor is the portion of a computer
system that carries out the instructions of a computer program, and is the
primary element carrying out the computer's functions. This term has been in
use in the computer industry at least since the early 1960s. The form, design and
implementation ofCPUs have changed dramatically since the earliest examples,
but their fundamental operation remains much the same.
Moore's Law from 1965 predicts that processing por should double every
18 months, but was revised in 1975 to every 2 years. This prediction was
made on the basis that the circuitry, resistors, and other processor parts
are being made smaller and smaller.
Currently, an average CPU can have processing speeds from about 2.0
GHz to 3.4 GHz, with the manufacturers fast approaching the 4.0 GHz
mark.
into ICs. CPUs based upon these "building block" ICs are generally referred to
as "small-scale integration" (SSI) devices.
TYPES OF PROCESSORS
Reduce costs and increase productivity with the new 2010 Intel Core processor
family. Delivering intelligent performance and energy efficiency, processors
from Intel offer the best choice for smart, safe, and reliable computing in the
office, at home, and on-the-go. Integrating advanced hardware-based
technologies built-in, the Intel Core processor family has Intel Turbo Boost
Technology and Intel Hyper-Threading Technology (Intel HT Technology) to
bring even greater performance and productivity by automatically adapting to
each user's unique needs.
1) Desktop processors:
4) Laptop processors:
Shatter Your Limits: It’s time for digital content creation that’s
limited only by your imagination. Experience total creative freedom with
the poor to encode video up to 40% faster.5 and enjoy incredible
TYPES OF PLATFORMS
Mobile Platform:
Just three months after their Developer Forum 2009 in September, Intel has
introduced new dual-core 2.66GHz Intel Core i7-620M processor with TDP
rating of 35W. Four other dual-core Intel Core i7 chips re introduced of which
two are for low-voltage family (2.0GHz Core i7-620LM and 2.13GHz Core i7-
640LM) and other two are for ultra-low voltage family (1.06GHz Core i7-
620UM and 1.2GHz Core i7-640UM).
Both pairs of low-voltage and ultra-low voltage processors will offer Intel
Turbo Boost Technology to increase the performance. The low-voltage Intel
Core i7 mobile chips have TDP rating of 25W while the ultra-low Core i7 chips
have TDP rating of 18W.
Two new Intel Core i3 and three new Core i5 mobile processors re also unveiled
at the same time. Out of these the new Core i3 processors are clocked beten
2.13GHz for Core i3-330M and 2.26GHz for Core i3-350M. Both processors
have Thermal Design Poor rating of 35W. These Core i3 are mostly made for
light-light notebooks but won’t offer Intel Turbo Boost Technology to increase
the CPU clock speed for higher performance.
Desktop Platform:
For the desktop segment, the “Clarkdale” processors include two Core i3 and
four Core i5 processors. The two dual-core Core i3 processors include 2.93GHz
Core i3-530 and 3.06GHz Core i3-540 processor. These processors won’t have
Intel Turbo Boost Technology support but can support Intel Virtualization
Technology. These Core i3 chips will have TDP rating of 73W.
Moving ahead, the four dual-core Core i5 chips include 3.2GHz Core i5-650,
3.33GHz Core i5-660, 3.33GHz Core i5-661 and 3.46GHz Core i5-670
microprocessors. These Core i5 chips will feature Intel Turbo Boost technology,
Intel Virtualization Technology and will have TDP of 73W while Core i5 will
have TDP of 83W.
OPERATION OF PROCESSOR
Arithmetic and Logic Unit (ALU) are two units that perform different
operations, but in similar operations. The Arithmetic unit processes the data for
math purposes or for additional processing like combination or deletion or
interruption processes. That is done with the logic unit.
Registers are special memory elements used by the CPU for storing data
temporarily during execution of instruction. For instance, the Instruction
Register (IR) holds the instruction being executed. Meanwhile the Process
Status Register holds "processor bit" about operations done by ALU. These
registers are pseudo memory modules; useful because they don't have to leave
the CPU so they are in the same "room" when the ALU or Control unit needs
them again.
The fundamental operation of most CPUs, regardless of the physical form they
take, is to execute a sequence of stored instructions called a program. The
program is represented by a series of numbers that are kept in some kind of
computer memory. There are four steps that nearly all CPUs use in their
operation: fetch, decode, execute, and write back.
2) Decode: The instruction that the CPU fetches from memory is used to
determine what the CPU is to do. In the decode step, the instruction is broken
up into parts that have significance to other portions of the CPU. The way in
which the numerical instruction value is interpreted is defined by the CPU's
instruction set architecture (ISA). In older designs the portions of the CPU
responsible for instruction decoding re unchangeable hardware devices.
3) Execute: During this step, various portions of the CPU are connected so
they can perform the desired operation. If, for instance, an addition operation
was requested, an arithmetic logic unit (ALU) will be connected to a set of
inputs and a set of outputs. The inputs provide the numbers to be added, and the
outputs will contain the final sum. The ALU contains the circuitry to perform
simple arithmetic and logical operations on the inputs.
4) Write back: Simply "writes back" the results of the execute step to some
form of memory. Very often the results are written to some internal CPU
register for quick access by subsequent instructions. In other cases results may
be written to slot, but cheaper and larger, main memory. Some types of
instructions manipulate the program counter rather than directly produce result
data. These are generally called "jumps" and facilitate behaviours like loops,
conditional program execution (through the use of a conditional jump), and
functions in programs. Many instructions will also change the state of digits in a
"flags" register.
The way a CPU represents numbers is a design choice that affects the
most basic ways in which the device functions. Some early digital
computers used an electrical model of the common decimal (base ten)
numeral system to represent numbers internally. A few other computers
have used more exotic numeral systems like ternary (base three).
Nearly all modern CPUs represent numbers in binary form; with each
digit being represented by some two-valued physical quantity such as a
"high" or "low" voltage related to number representation is the size and
precision of numbers that a CPU can represent. In the case of a binary CPU,
a bit refers to one significant place in the numbers a CPU deals with. The
number of bits (or numeral places) a CPU uses to represent numbers is
often called "word size", "bit width", "data path width", or "integer
precision" when dealing with strictly integer numbers (as opposed to
floating point). This number differs beten architectures, and often within
different parts of the very same CPU.
PERFORMANCE OF PROCESSOR
--The performance or speed of a processor depends on e.g. the clock rate and
the Instructions per Clock (IPC), which together are the factors for the
Instructions Per Second (IPS) that the CPU can perform.
-- Ideally, a dual core processor would be nearly twice as porful as a single core
processor. In practice, hover, the performance gain is far less, only about fifty
percent, due to, e.g. imperfect software algorithms and implementation.
RAM Vs PROCESSOR
Often, the first thing which comes to our mind when thinking of upgrading
our computer are either adding more memory modules (RAM) or going for a
faster processor (CPU).
The main reason is that these two components form the very basic core of a
machine, allowing it to store program instructions (gathered from your hard
drive) and subsequently access and process these via the CPU.
Adding more RAM to system doesn’t hurt and, if the system requires, will
certainly notice an improvement.
It isn’t recommended that upgrade one component if all the rest is terribly
outdated compared. Won’t notice any improvements and old technology won’t
be able to make use of improved.
As briefly stated in the previous paragraphs, RAM is the area of your computer
which stores information required by your operating system, games,
video/audio and other programs. This information typically needs to be
accessed quickly and it is possible, thanks to a processing unit (i.e. your CPU or
one present on a graphics card for instance), for any of this information to be
gathered at any one time: hence the word “Random” in the acronym. RAM is
also volatile, which means it will be flushed each time you turn your computer
off.
This is where random access differs from serial access, where one needs to
search through from the very beginning in order to access the required
information. Magnetic tape is an example of serial access.
It is important to point out that RAM cannot process information but can only
serve as storage. Upgrading your computer with more or larger storage RAM
modules will not add more system resources for processing information or
allow you to run more than one processor intensive application (as in the case of
hyper-threading or a multi-core CPU).
The CPU is the brain of your machine which gathers information, via the
control unit, from your installed memory modules, and processes instructions,
via the logic unit, in order to run your programs. The CPU comes with varying
clock speeds, which determine the number of instructions executable per
second, and many other features which allow for faster and smoother execution.
A faster-clock CPU installed in your machine will allow you to perform these
calculations and instructions faster, which in practical terms means being able to
quickly access programs, read memory and execute the functions within those
programs. For example, in a video conversion operation (converting one format
to another), the processing times will be much less if you have a dual-core
processor installed. When using a program like Photoshop or Paint Shop Pro,
the effects you apply to an image use processing pore also.
i5 PROCESSOR Vs i7 PROCESSOR
The new Core i5 processors re released in September 2009. As the name would
suggest, these processors do not represent a new architecture but rather a
mainstream release of processors based on the Nehalem architecture, which re
previously available only as part of the Core i7 line. Of course, the marketing of
the new products indicates that they are intended to be seen as less capable
products than the existing Core i7 processors.
One of the most importance differences between Core i5 and Core i7 is the use
of a new socket, known as LGA1156. This new socket will also be used by
some Core i7 products, but current
Core i7s use the LGA1366 socket.
The new LGA1156 socket is
partnered with a new chipset, the
P55. As those who follow
computing would guess, the P55 is
designed as a mainstream chipset.
This means fewer features, but lot
cost.
Turbo Mode:
- The Core i7-965, for example, could hit 3.46 GHz when the turbo mode was
fully active. Its stock speed is 3.2 GHz.
- Intel has said this will be enhanced with the new Core i5 products as ll as with
the new Core i7 860 and 870. The Core i5 750, for example, should be able to
accelerate from its stock speed of 2.66Ghz to speeds as high as 3.2Ghz.
- The original Core i7 products, and their associated X58 chipset, make use of
triple-channel DDR3 memory. This meant that it was best to purchase RAM
sticks in multiples of three.
- This is a turn off to many users because it makes RAM less flexible and
requires more spending upfront. Gamers may enjoy spending the money to see
the i7 really perform.
-Core i5, however uses traditional dual-channel memory. This should make
RAM less expensive for most users. Some new Core i7s will also support dual-
channel memory instead of triple-channel. The performance difference should
be insignificant for most users.
Difference in Hyper-Threading:
- While Core i7 products have all been quad-cores, they appear in Windows as
having eight cores. This further improves performance when using programs
that make good use of multi-threading.
-Some Core i5 products have this feature, but some do not. Currently, the Core
i5 750 does not have hyper-threading, but it does have four physical cores. The
dual-core Core i5 products, on the other hand, do have hyper-threading.
Multi-graphics:
- Another significant change with the Core i7/X58 landscape had to do with
graphics cards. Intel's Skull trail platform of last year supported both standards
as ll, but the specialized CPUs that made the board worthwhile re prohibitively
expensive.
- With the X58 chipset, yes, it comes on an expensive motherboard, but you can
purchase a Core i7 chip to go with it for less than $300. The Core 2 Extreme
QX9775 Skull trail CPU started at $1,500.
- Gamers who stay current with graphics cards should be especially happy with
this flexibility, as changing 3D card vendors will no longer require a wholesale
system rebuild.
-- One mechanism Intel uses to make its caches more effective is prefetching, in
which the hardware examines memory access patterns and attempts to fill the
caches speculatively with data that's likely to be requested soon.
-- Intel claims the Core i7's prefetching algorithm is both more efficient than
Penryn's—some server admin wound up disabling hardware prefect in Xeons
because it harmed performance with certain workloads, a measure Intel says
should no longer be needed—and more aggressive, as ll.
--The Core i7 can get to main memory very quickly, too, thanks to its integrated
memory controller, which eliminates the chip-to-chip "hop" required when
going over a front-side bus to an external north bridge.
The Seminar Report Page 31
The Intel i7 Processor
-- Again, this is a familiar page from AMD's template, but Intel has raised the
stakes by incorporating support for three channels of DDR3 memory.
-- In fact, tested it with 1600 MHz memory, since this is a more likely
configuration for a thousand-dollar processor.
-- For a CPU, the bandwidth numbers involved here are considerable. Three
channels of memory at 1066 MHz can achieve an aggregate of 25.6 GB/s of
bandwidth.
-- At 1333 MHz, you're looking at 32 GB/s. At 1600 MHz, the peak would be
38.4 GB/s, and at 2000 MHz, 48 GB/s.
--With dual channels of DDR2 memory at 1066MHz, the Phenom's peak would
be 17.1 GB/s.
-- The Core i7 is simply in another league. In fact, our Core i7-965 Extreme test
rig with 1600MHz memory has the same total bus width (192 bits) and
theoretical memory bandwidth as a GeForce 9600 GSO graphics card.
CONCLUSIVE REPORT
The first is performance, which considers how effective the Intel Core i7
processor performs in operation against similar desktop products. While any
conspicuous benefits to video game performance, it didn't harm frame rate,
either. The new 32nm Westmere micro architecture reduces power drain down
to only 12W at idle, which is a 'Green' step in the right direction and conserves
energy.
Overclockers may be sorely disappointed if they expect the 980X to beat the i7-
975 to 5 GHz, because the extra cores make this chip a little less nimble when it
comes to dancing around boundaries. Ultimately the Intel Core i7 is not meant
to be a value-driving SKU, and the PC-hardware elite have always understood
this. Much like Lexus automobiles, which are little more than decorated
Toyota's, Intel saves the bells and whistles for their exclusive Extreme Edition
product line.
WORKS CITED
i7 Processor
By Andrew S. Tavermann
Hyper -Threading
www.intel.com
www.answers.com
www.wikipedia.com