Professional Documents
Culture Documents
INTRODUCTION
????
2
TABLE FLOWMASTER
OF CONTENTS
INTRODUCTION
????
This new service is all part of our directive to make sure you get
the information you need, when you need it to ensure customer
satisfaction.
USE THIS CATALOG IN CONJUNCTION WITH OUR APPLICATION GUIDE TO REFERENCE ALL PRODUCTS, PART NUMBERS
AND FITMENT OR VISIT OUR WEBSITE:
www.flowmastermufflers.com • www.hushpower.com
3
FLOWMASTER INTRO
TECHNOLOGY
???? EXPLAINED
FLOWMASTER
IT’S WHATS IN THE CASE
THAT MAKES THE DIFFERENCE
MUFFLER TECHNOLOGY
Flowmaster and Hushpower mufflers are
the result of extensive scientific research and
real world testing. Flowmaster products deliver
improved horsepower, torque, fuel efficiency
and throttle response. In many cases our pat-
ented muffler designs can actually flow more
air than an open pipe. This is accomplished by
“scavenging” the exhaust gases from the cylin-
ders by creating a slight “low pressure” on the
exhaust side of the engine. By creating a low
pressure the cylinder has less residual burnt
gases in the cylinder and thus can have a more
complete burn of the fuel that is introduced
into it. This simply means that more power can
be made by the engine. Flowmaster and Hush-
power mufflers both contain patented technol-
ogy which makes it possible to have greater fuel
efficiency!
4
TABLE FLOWMASTER
OF CONTENTS
ACCOMPLISHMENTS
????
First design of Flowmaster chambered mufflers are introduced in Sprint car racing in Northern
California. To make it easier to carry around at racetracks, Ray attaches a handle on the muffler which
quickly gets attention and is nick-named by racers, the “Suitcase Muffler.”
The second design of the quieter three chamber is born. It is called the 50 series and incorporates
a “Tuning Chamber” that removes some of the interior resonance that is common with the two
chamber 20 series™. That same year, the second design of the “two chamber” muffler is introduced and
replaces the 20 series. It is named the 40 series.
Scavenger D-port collector technology introduced as “two into one” Y-collectors and also
as a header collector replacement with the four-two-one header collector that was developed &
tested in numerous forms of racing, including teams racing in the NASCAR Winston Cup circuit.
The third design three chamber 50 Series is released. The technology is named the Pressure Buster
line of mufflers. They have increased scavenging over the previous designs and an improved resonance
chamber.
Flowmaster’s “Delta Flow” technology is introduced into all series of Flowmaster muf-
flers. It decreases sound and increased scavenging in the mufflers. The fourth design of the three
chamber 50 Series also incorporates an improved Two-Stage Tuning Chamber design
that removes most all interior resonance from the vehicle.
Using technology developed at racetracks, Flowmaster releases our most powerful street muffler to date,
the Super 40 Series muffler. Packaged in a larger case, with an improved Delta Flow design that has
a deeper sound.
The Hushpower HP-2 street line of mufflers are introduced. They are available in a compact
T304 or T409 stainless steel case and quickly become very popular.
Hushpower develops the PRO Series line of mufflers for everything from race applications, light,
medium, heavy duty gas, diesel trucks, buses, industrial applications and more.
Flowmaster is inducted into the inaugural Hot Rod Magazine “Speed Parts Hall Of Fame”, as one
of the most significant automotive parts of all time. Flowmaster also introduces the Super 44 muffler in to
its line. The Super 44 adds greater flow and a deeper aggressive tone in a 4.00” case.
Flowmaster launches extensive lineup of 409S Stainless Steel performance products covered by a
10-year warranty. In an addition Flowmaster debuts it’s Special Project Development division to
create unique, one-of-a-kind custom parts – the solution for hard to fit, totally specialized muffler design
problems.
5
FLOWMASTER INTRO
RACE
???? PRODUCTS
6
TABLE FLOWMASTER
OF CONTENTS
RACE PRODUCTS
????
- Mike Moran
Moran Motorsports
7
FLOWMASTER
RACE PRODUCTS
Flowmaster’s patented Scavenger Series Technology improves the exhaust cycle and scavenging efficiency of the cylinders
combustion chambers. This results in a cleaner burn during the power cycle netting an overall increase in performance.
The Scavenger Series technology does this by utilizing the energy contained in the engines exhaust pulses to help scavenge alternating
pulses, in turn maximizing the engines efficiency. These pulses are comprised of burned and unburned gases, heat and sound, and can
be thought of as a mass of leftover energy traveling down the pipe. When the exhaust valve opens, the pulse begins traveling through
the exhaust port. When the exhaust valve suddenly closes, a low pressure area is created behind the pulse. In traditional collector
designs these exhaust pulses are essentially dumped into a large volume tube where a great deal of their energy is wasted or lost.
The Scavenger Series technology pairs tubing from the headers, or the exhaust system, into slightly larger tubes that incorporate
“D-shaped ports” and then joins them into a single larger tube. This allows the pulse to remain sealed against the outer wall of
the tube and thereby maintains the low pressure behind it.The low pressure area is then “seen” by the paired tube or cylinder where
it will actually help scavenge, or pull, the following pulse through. This cycle is continually repeated as the engine progresses through
its firing order. The process can be so effective that in many cases the increased efficiency may require a fuel jetting change to avoid
a lean condition as a result of the increase in cleaner air now in the cylinders; which means more power.
Our Scavenger Series Flowmaster’s unique, pat- Flowmaster’s “Y” Collec- Our Scavenger Turndowns
X-Pipe Kits mount ented Scavenger Se- mount directly to our Scavenger
tors utilize the same pat-
Series race mufflers and are high-
ahead of the mufflers in ries “C” Collector is ented PULSE TECHNOLOGY ly recommended for even greater
the center of the vehicle founded on the principle as our Scavenger Series sound reduction.
(in place of a traditional of PULSE TECHNOLOGY. “C” collectors, but are
H-pipe) and can provide The large “D-shaped” designed to be used to
significant torque improve- ports in the Scavenger
maximize a “two into one”
ments along with a smooth Series Collectors cre-
single exhaust system.
distinctive tone. Utilizing ate a larger surface area
Whether it’s your race-
our patented Scavenger to help pull the exhaust
car, tow vehicle or RV, the
D-Port technology, these pulses from the opposing
easy to fit kits function connected cylinders. This Scavenger “Y” collectors
exceptionally well on creates a cleaner burn for will make sure you’re get-
modified GM, Ford, Mo- the incoming fuel and air ting maximum power from
par “Muscle Car” applica- resulting in an increased your engine. Sizes range
tions while maintaining the and broader torque curve, from dual 2.00” inlets up This Header Collector Ball Flange
to dual 3.50” inlets, with Kit takes the place of messy three
classic Flowmaster sound. putting more power in the
bolt flange type connections and
Available in Direct-fit kits rpm range were you need outlet sizes ranging from a allows for a leak free and gasket
as well as Universal kits in it most. After all, its torque single 2.50” up to a single free ball flange type connection.
a variety of sizes. that moves your vehicle. (sold in pairs)
massive 5.00” outlet.
8
FLOWMASTER
FAMILY OF MUFFLERS
FLOWMASTER
FAMILY OF MUFFLERS
• Trucks, SUVs, RVs and High Performance Street & Strip
• Heavy Duty Towing
• Mild Exterior Tone
M • Trucks, SUVs, RVs and High Performance Street & Strip
I • Heavy Duty Towing
L • Mild Exterior Tone
D • Trucks, SUVs, RVs and High Performance Street & Strip
• Heavy Duty Towing
• Mild Exterior Tone
biles and trucks. Flowmaster mufflers produce more • High Performance Street/Strip & Trucks
• Mild Interior Resonance
power than Original Equipment (OE) and competi- • Aggressive Exterior Tone
• High Performance Street/Strip & Trucks
tive aftermarket products. What makes Flowmas- A • Aggressive Interior Resonance
ter so unique is our performance improvements G • Aggressive Exterior Tone
G • High Performance Street/Strip & Trucks
are paired with our “signature” exhaust tones. The R • Aggressive Interior Resonance
E • Aggressive Exterior Tone
“Flowmaster Sound” is offered in many different S • High Performance Trucks & Off-Road Applications
S • Moderate Interior Resonance
tones depending upon the muffler series. From the • Aggressive Exterior Tone
I
deep, aggressive sound of the Super 44 to the quiet V • High Performance Street/Strip & Trucks
• Moderate Interior Resonance
E • Aggressive Exterior Tone
and subtle Flowmaster tone of the 70 Series, Flow-
• High Performance Street/Strip & Trucks
master offers the perfect performance and exhaust • Moderate Interior Resonance
• Aggressive Exterior Tone
tone to fit your application!
• Truck and RV Applications & High Performance Street
• All Forms of Motorsports
H • Mild to Moderate Exterior Tone
U
• High Performance Street Cars, Rods & Trucks
S • Mild Interior Tone
H • Moderate Exterior Tone
P • Farm, Hunting and Recreational Applications
O • No Loss of Power
W • Maximum Sound Attenuation
E • Tig-Welded T304 Stainless Case
R • Increased Performance
• Moderate Exterior Tone
9
FLOWMASTER INTRO
MILD
???? TONE MUFFLERS
Deep Smooth Tone Outside,
Minimal Resonance
50 SERIES™ BIG BLOCK® TONE LEVELS 70 SERIES™ BIG BLOCK II® TONE LEVELS SUPER 50 SERIES™ SUV TONE LEVELS
TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR
LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS
DESCRIPTIONS LEVEL LEVEL 28.00” OVERALL LENGTH
DESCRIPTIONS LEVEL LEVEL 28.00” OVERALL LENGTH
DESCRIPTIONS LEVEL LEVEL
23.00” OVERALL LENGTH
10.00” WIDE
10.00” WIDE
Deep Deep Deep 50
SERIES
The 50 Series Big Block Muf- The 70 Series Big Block II Muf- The Flowmaster Super 50 Se-
fler is our largest and quietest muf- fler uses a longer 5.00”x10.00” ries (SUV) Muffler incorporates
fler made for tow vehicles, full-size case for increased volume and the 5.00”x10.00” case size with the
trucks, large SUV’s and RV’s / Mo- added sound reduction that will technology from the 50 Series Delta
torhomes. This muffler is made for
still fit many applications that our Flow muffler. Made for all SUV’s and
more than just big cubic inch engine
wider 50 Series Big Block muffler large displacement engine vehicles,
applications and has a very large
Resonance Tuning Cham- won’t fit. It utilizes Flowmaster’s the Super 50 Series larger case size
ber to almost completely reduce patented Delta Flow Technol-
allows for optimum exhaust flow,
interior resonance in large cab ve- ogy for maximum efficiency and
increased mileage, and reduced in-
hicles and enough case volume to minimum interior resonance. The
terior resonance. Also excellent for
handle engines under heavy loads. 70 Series mufflers are perfect for
Significant improvements in mileage, use on full-sized, high performance
high performance street cars, most
torque, and horsepower are to be street cars looking to reduce inte-
trucks, SUV’s, RVs and tow vehicles
expected from this muffler, as well that require quiet operation with rior resonance and tone levels for
as decreased engine heat and wear. everyday driving.
improved sound.
10
TABLE FLOWMASTER
OF CONTENTS
MODERATE TONE MUFFLERS
????
Deep Smooth Tone Outside,
Moderate To Minimal Resonance
60 SERIES™ DELTA FLOW® TONE LEVELS 50 SERIES™ HEAVY DUTY TONE LEVELS DELTA 50 SERIES™ DELTA FLOW® TONE LEVELS
TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR
LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS
DESCRIPTIONS LEVEL LEVEL DESCRIPTIONS LEVEL LEVEL DESCRIPTIONS LEVEL LEVEL
19.00” OVERALL LENGTH 24.00” OVERALL LENGTH 23.00” OVERALL LENGTH
10.00” WIDE
9.50” WIDE
SERIES 50
50
SERIES SERIES
60 60
SERIES
Mellow SERIES
Mellow Mellow 50
SERIES
OEM
Mild Mild Mild
OEM OEM OEM OEM OEM
13.00” CASE LENGTH 18.00” CASE LENGTH 17.00” CASE LENGTH
5.00” THICK 5.00” THICK 4.00” THICK
All 60 Series Mufflers feature The 50 Series Heavy Duty Greatly reduced interior resonance,
Delta Flow Technology to increase Muffler is appropriately named, a smaller case size, and moderate
horsepower and torque in most tough customer just like the trucks it exterior tone are just some of the
benefits to the 50 Series Delta
four and six cylinder vehicles. The was designed for. With 4.00” internal
Flow Mufflers. With a specially
60 Series mufflers have shown sig- components and 5.00”x10.00” case
designed Resonance Tuning Cham-
nificant improvements in mileage, size, these mufflers help to signifi- ber, the 50 Series Delta Flow gives
helping to save fuel on many com- cantly increase mileage, torque, and all the performance, while reducing
muter vehicles, the mellow tone horsepower while greatly improving the tone inside and outside of your
making for a pleasant and quiet towing power and acceleration. The vehicle. Simply stated, it delivers
driving experience. Just by adding a 50 Series Heavy Duty is great for the same great performance from
Flowmaster, without the increased
larger diameter tailpipe and Flow- all gas and diesel applications, and
sound. Available in Aluminized Steel
master stainless tip you can create a late-model trucks used in the most or 409S Stainless for harsh weather
deeper tone overall inside and out. extreme working conditions. applications.
11
FLOWMASTER INTRO
????
AGGRESSIVE TONE MUFFLERS
DELTA 40 SERIES™ DELTA FLOW® TONE LEVELS SUPER 40™ DELTA FLOW® TONE LEVELS 40 SERIES™ ORIGINAL TONE LEVELS
TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR
LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS
DESCRIPTIONS LEVEL LEVEL DESCRIPTIONS LEVEL LEVEL DESCRIPTIONS LEVEL LEVEL
19.00” OVERALL LENGTH 19.50” OVERALL LENGTH 19.00” OVERALL LENGTH
Powerful 40
Powerful SUPER
40 Powerful 40
SERIES SERIES
10.00” WIDE
9.50” WIDE
SUPER
40
40 40
SERIES SERIES
Designed to minimize interior reso- The Super 40 Muffler was de- The muffler that started it all, the
nance, the 40 Series Delta Flow veloped from our Top Ten race muf- original 40 Series Muffler is an
fler lineup for use on the street and aggressive sounding street/strip
Muffler offers an aggressive exte-
strip. Utilizing Delta Flow Tech- muffler that delivers a powerful
rior tone. The 40 Series Delta Flow
nology, this muffler gives the best
“Flowmaster Sound”. If you really
helps increase torque and horse- performance to higher horsepower
want to hear your exhaust system
power on many late-model perfor- vehicles. The Super 40 features a
– from both inside and outside of
black, 5.00”x10.00” aluminized case,
mance cars and trucks. Available in the vehicle, the 40 Series is for you.
which keeps the resonance down
Aluminized and 409S Stainless Available in either aluminized steel
while the deep outside tone says it’s
for harsh weather applications. or 409S Stainless Steel.
a Flowmaster!
12
TABLE FLOWMASTER
OF CONTENTS
AGGRESSIVE TONE MUFFLERS
????
SUPER 44™ EXTREME SPECIFICATIONS SUPER 44™ DELTA FLOW® TONE LEVELS 80 SERIES™ CROSS FLOW TONE LEVELS
TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR TONE INTERIOR EXTERIOR
LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS LEVEL TONE TONE MUFFLER DIMENSIONS
DESCRIPTIONS LEVEL LEVEL DESCRIPTIONS LEVEL LEVEL DESCRIPTIONS LEVEL LEVEL
19.00” OVERALL LENGTH 19.00” OVERALL LENGTH VARIABLE LENGTHS
9.50” WIDE
VARIABLE
44EX 44
Flowmaster’s tough Super 44 Ex- Two Chamber Mufflers. Flowmas- For true dual exhaust performance
treme Mufflers offer a massive ter’s Super 44 Muffler uses the where only a single exhaust system
improvement in crush resistance - same Delta Flow Technology found in will fit such as is commonly found
sixteen times that of standard OEM our larger Super 40 mufflers.The Su- in classic Camaros and Firebirds, the
mufflers making them perfect for per 44 delivers a powerful rich tone 80 Series Cross-Flow Muffler
aggressive off road vehicles from
and is the most aggressive, deepest fits transversely behind the rear
rock crawlers to full sized trucks.
sounding, highest performing four- axle and in front of the fuel tank, the
These heavy-duty off-road mufflers
inch case street muffler we’ve ever OE placement. With single or dual
are built for abuse with a 14-gauge
built! Constructed from 16-guage inlets, the 80 Series gives excellent
diamond plate steel case, and are
offered in ten offset/pipe diameter aluminized or 409S Stainless ground clearance, aggressive tone
configurations for a wide range of Steel and fully MIG-welded for and dual outlets to fit muscle cars
applications. maximum durability. requiring this specialized fitment.
13
HUSHPOWER
HUSHPOWER MUFFLERS
14
HUSHPOWER
HUSHPOWER MUFFLERS
Hot Rods, Customs, Sport Trucks and Noise Reduction for Hunting, Security,
Off-Road Military and Everyday use
The Hushpower HP-2 Performance Hushpower’s unique line of ATV
Our Special Projects Division also
Muffler is a real hot rod muffler that Silencers are designed for hunters,
offers a variety of “Specialty Mufflers”
delivers all the required benefits of a security and military applications where
for a range of vehicles where tradi-
high performance street and race muf- sound control and full power are a ne-
tional mufflers are too large and smaller,
fler, yet is small enough for street rod cessity. Developed from our HP-2™
purpose built mufflers are required.
applications. Built from either T409 or street mufflers, the ATV Silencers™
These products have proven to be ex-
T304 stainless steel, this smooth, don’t diminish power yet can reduce
tremely successful in applications rang-
stylish muffler can be polished or coat- sound levels by up to 10dB. They offer
ing from Cobra side pipes and Vintage
ed for a great looking finish. The HP-2 “easy on and off” installation with little
motorsports, to import “Tuners”
or no modification to your ATV. Hush-
muffler is designed for use with street where sound requirements often
power offers 14 models for Honda,
rods, customs, lowriders and sport equate to lost power. By applying our
Yamaha, Polaris, Bombardier and Arctic
trucks or industrial applications where cutting edge technology drawn from
Cat applications, plus a universal model
heat control and space are an issue. our HP-2 and Pro series lines, we en-
for unique installations. The Hushpower
The HP-2 mufflers feature an innovative gineer these custom products to meet
silencers quiet exhaust noise using our
“Cool Shell” casing, a key feature in even the strictest sound level require-
patented Hushpower Wide Spectrum
contributing to the muffler’s sound and ments with no loss in power. The key
Sound Cancellation Technology. The
heat control design. Advanced “flow” to its success is in the patented internal
rugged, insulated Cool Shell case is
technology produces broadband sound core design which delivers maximum
constructed with rust-resistant, T409
cancellation for a rich ‘50’s tone. The exhaust efficiency while at the same
stainless-steel and the internal core is
HP-2 mufflers use a 4.00” X 5.50” X time minimizing the interior drone that
perforated T409 stainless steel for du-
18.00” case and can be ordered with is associated with other performance
rability. Like all Hushpower products,
inlet/outlet diameters including 2.00”, mufflers. Please call to speak with one
these silencers are manufactured in the
2.25” and 2.50”. of our techs for more information.
USA and carry a three-year warranty.
15
FLOWMASTER
409S® STAINLESS STEEL
Flowmaster Standard 40 Series, Super 44, 40 and 50 Series Delta Flow Mufflers and popular
exhaust systems are now available in 409S Stainless Steel.
Flowmaster has gone stainless announcing the arrival of a wide variety of Flowmaster products in 409S Stainless
Steel for the first time ever. Featuring a 10-Year limited warranty, the new stainless steel products, including the entire
listing of standard 40 Series mufflers and aggressive Super 44 series mufflers, are in addition to the highly popular alu-
minized products offering a distinct choice for the buyer. These performance and sound enhancing products deliver the
same fine benefits as found in their aluminized versions but with enhanced durability.
PART# 817480
’05 - ’10 Dodge Magnum RT / Charger RT / 300C
AMERICAN THUNDER 409S STAINLESS STEEL
CAT-BACK SYSTEM DOR(Dual Out Rear)
PART# 843046
Super 44 Muffler
O/C (Offset in / Center out)
PART# 817116 ~ ’87 - ’93 Ford Mustang GT 5.0L PART# 817421 ~ ’05 - ’10 Ford Mustang V6
AMERICAN THUNDER CAT-BACK SYSTEM DOR(Dual Out Rear) AMERICAN THUNDER AXLE-BACK SYSTEM SOR(Single Out Rear)
PART# 817213 ~ ’87 - ’93 Ford Mustang LX 5.0L / ’86 GT 5.0L PART# 817460 ~ ’05 - ’10 Ford Mustang GT 4.6L
AMERICAN THUNDER CAT-BACK DOR(Dual Out Rear) AMERICAN THUNDER CLASSIC AXLE-BACK SYSTEM DOR(Dual Out Rear)
PART# 817312 ~ ’99 - ’04 Ford Mustang GT 4.6L / Mach I / Bullitt PART# 817461 ~ ’09 - ’10 Dodge Challenger RT 5.7L V-8
AMERICAN THUNDER CAT-BACK SYSTEM DOR(Dual Out Rear) FORCE II CAT-BACK SYSTEM DOR(Dual Out Rear) uses factory tips
PART# 817405 ~ ’05 - ’10 Dodge Magnum RT/Charger RT/Chrysler 300C 5.7L PART# 817479 ~ ’09 - ’10 Dodge Challenger RT 5.7L V-8
FORCE II CAT-BACK SYSTEM DOR(Dual Out Rear) AMERICAN THUNDER CAT-BACK SYSTEM DOR(Dual Out Rear) uses factory tips
PART# 817410 ~ ’05 - ’10 Ford Mustang GT 4.6L Axle-Back PART# 817480 ~ ’05 - ’10 Dodge Magnum RT/Charger RT/300C 5.7L
AMERICAN THUNDER AXLE-BACK SYSTEM DOR(Dual Out Rear) AMERICAN THUNDER CAT-BACK SYSTEM DOR(Dual Out Rear)
16
FLOWMASTER
TOP PROS AGREE
TOP PROFESSIONALS . . .
. . . ALL AGREE,
FLOWMASTER IS THE RIGHT CHOICE!
Ted Yamashiro
Top of the Hill Performance
I’ve used Flowmaster mufflers for many years, on lots of my Corvettes. In all
the years I’ve used Flowmaster/Hushpower, I’ve never had a problem with
the sound, performance, fit, or the life of the mufflers. I’m very well pleased!
Eddie Hill
NHRA Top Fuel champion in 1993, and First in the Fours
Top Fuel Drag boat champion
17
FLOWMASTER
EXHAUST SYSTEMS
EXHAUST SYSTEMS
Best Fitting Systems on the Market!
All Flowmaster exhaust systems are designed with the latest technology to provide even better performance
than a Flowmaster muffler alone. Flowmaster’s systems will improve acceleration and passing power as well as
increase fuel mileage. Every system is individually engineered and dyno-tested for each application and includes
all required mounting hardware. All tubing is mandrel bent for superior exhaust gas flow, and is a key to the
system’s performance improvements. Both mufflers and tubing are fabricated from either 16 gauge aluminized
or 409S stainless steel.
PART# 17470
’96 - ’99 Chevrolet / GMC C/K 1500 Trucks
5.7L EX/SB
AMERICAN THUNDER® DOR/S
(Dual Out Rear/Side)
Flowmaster’s line of American Thunder Exhaust Systems are as the name implies, bolt this system on an you’ll let people
know that you have arrived. If you are looking for the famous , full on “Flowmaster Sound”, look no further. American Thunder
will deliver the aggressive tone you want, as well as the performance you demand from Flowmaster.
Flowmaster’s line of Force II Exhaust Systems are designed to let folks you know you’ve got a Flowmaster system under your
vehicle when you “open it up”, but don’t want a lot of interior resonance.The Force II system provides plenty of “Flowmaster Sound”
under acceleration but lower sound levels while cruising, it may just be the perfect system for you.
IN TERIOR TONE LEV EL E XTERIOR TO N E L E V E L TONE LEVE L K E Y
AMERICAN THUNDER FORCE II AMERICAN THUNDER FORCE II
OEM
MILD
AGGRESSIVE
18
FLOWMASTER
EXHAUST CONFIGURATIONS EXHAUST SYSTEMS
Cat-Back Systems
Cat-Back exhaust systems leave the factory-delivered emissions control equip-
ment in place and add specially-designed exhaust pipes and performance mufflers after the
catalytic converter to complete the exhaust system. The net result is increased exhaust system efficiency,
lower exhaust backpressure, more horsepower and torque, better throttle response and a much better performance
tone, while still retaining the emissions legality of the vehicle.
Axle-Back Systems
Axle-Back exhaust systems generally apply to vehicles which utilize rear mounted mufflers. These kits also leave the factory-
delivered emissions control equipment in place and add a performance-tuned muffler, short tubing section and exhaust tip to
the exhaust system. Designed to bolt on or weld up to the factory tubing, most kits require only slip-on clamps to attach, and
use factory hanger mount locations. The net result is increased exhaust system efficiency, lower exhaust backpressure, more
horsepower and torque, better throttle response and a much better performance tone, while still retaining the emissions legality
of the vehicle.
Single Rear Exit (SOR) and Single Side Exit (SOS) Exhaust Systems
These systems are for the person who wants a subdued but custom look with all
the benefits of a Flowmaster exhaust system. They feature mandrel bent 16-gauge
aluminized steel tubing, either weld-on or flanged inlet pipe/pipes, specially tuned
muffler, clamps, hangers and stainless steel exhaust tip exiting in the factory location
either under the bumper, or through the valance at the rear of the vehicle (SOR) or
out the side (SOS) behind the rear tires.
Dual Rear Exit (DOR) and Dual Side Exit (DOS) Exhaust Systems
The D.O.R. systems are designed for the person who wants that custom look of a
dual exhaust on a late model vehicle that came with a factory single exhaust. These
systems feature mandrel bent 16-gauge aluminized steel tubing, either weld-on or
flanged inlet pipe/pipes, a specially tuned muffler, clamps, hangers and stainless steel
exhaust tips for that aggressive look and sound of a dual exhaust system. Our Dual
Side Exit systems are recommended for towing applications.
19
FLOWMASTER
TESTIMONIAL
Troy Trepanier
Selects Flowmaster
America’s leading custom and performance car builders
know what they want . . . and they want Flowmaster for
performance and sound!
Rad Rides by Troy is a leading custom car shop headed up by the amazingly talented
Troy Trepanier who creates rolling works of art.Troy is a huge fan of Flowmaster and
uses both Flowmaster and Hushpower mufflers and systems on his highly regarded
creations not only because of the enhanced performance, but the great tone they
create.
Troy’s leap into car building began in 1986 when his grandfather gave him a 1966
Chevelle to “fix up.” In 1990, he took that car to the DuQuoins Street Machine Na-
tionals and was amazed at the building techniques he saw. Motivated by the experi-
ence, he redid his Chevelle shortly thereafter with a unique blend of ideas. He called
it Pro Box and it was a huge hit . . . and launched a new company.
Rad Rides by Troy was established in 1995 as a father and son business that has
grown to become one of America’s top automotive shops. Along the way Troy has
become a team builder, employing a close-knit group of skilled fabricators, mechan-
ics, painters and machinists. Over the years, Troy has carefully forged essential part-
nerships with some of the industry’s leading suppliers.
Today, Rad Rides by Troy is one of the most well-known and respected names in
the business. In addition to building cars for many of the top car collectors in the
country, Troy has worked closely with Ford, GM, Chrysler, Toyota… both sports and
Hollywood celebrities… and is now developing an environmentally friendly etha-
nol kit that is the only EPA certified E85 kit available in America. He was fea-
tured on “Rides” and participated with Chip Foose on two
“Overhaulin” episodes.
20
FLOWMASTER
SPECIAL PROJECTS
SPECIAL
PROJECT
DEVELOPMENT
The Solution to your exhaust system challenges
For many hot rodders, racers and general performance enthusiasts, a one-size-
fits-all exhaust system simply won’t cut it. Perhaps your vehicle is a hard to fit
application and requires a unique muffler/exhaust system creation. That kind of
personalized, one-on-one service during product design and creation has been
tough to find in the past, but thanks to Flowmaster’s Special Project Develop-
ment, enthusiasts and racers can now dream big.
Flowmaster launched this new service to their customers in 2008 and it has been
well received by customers around the world. With over 25 years of exhaust
technology experience, Flowmaster can fabricate a muffler for virtually any ap-
plication and tailor it to meet your fitment, sound and appearance specifications.
Imagine a perfectly tuned and fitted exhaust system designed specifically for your
ride! Our skilled fabricators can modify existing Flowmaster products or create
a completely one-off systems product from a wide range of materials – mild steel,
stainless steel, etc. – with personalized one-on-one service during the product
design and manufacturing process. If your racecar, show car or street car de-
serves this custom approach, Flowmaster is ready and willing to provide you with
cutting-edge fabrication and technology.
Best of all, we’re not just talking mufflers and exhaust tubing. The Special Project
Development considers every facet of the exhaust installation from the flange
to the hangers including every auxiliary component necessary. Let our skilled
fabricators build your next exhaust system. Contact Flowmaster’s Special Project
Development (800) 544-4761 Ext 710.
21
FLOWMASTER
INSTALLATION ACCESSORIES
Flowmaster’s line of Installation Accessories are designed for the professional installer and the Do-It-Yourself
builder. These accessories are designed to work with Flowmaster mufflers in custom installations to allow for a high
quality installation and years of reliable service. Universal Pipes can be fit to any application to build a system for your
needs. Incorporate the Universal Scavenger Pipe Kit or Universal Balance Pipe Kit to balance out your system.
Form a smooth bend to transition from one pipe The Turbo Diesel Down Pipe Kits are de-
to another, Flowmaster Mandrel Bend tubing signed for use with Ford F-Series and Chevrolet
is the wise solution. diesel trucks. Increases air flow 25-percent. In-
18.00” Length cludes two pipes and installation hardware.
22
FLOWMASTER
APPAREL & TIPS
Flowmaster
License Plate
Holder
Set of 2
Part# 651010
Flowmaster Oval Logo T-Shirt
PART# 61033 - charcoal
PART# 61034 - light grey
PART# 61031 - black
PART# 61032 - white
SM > 3XL Flowmaster Logo Banner
78” X 22” - Part# 651410
36“ X 12” - Part# 651310
“Classic” Shark T-Shirt
PART# 61041 - black
PART# 61041 - white
SM > 3XL
Flowmaster
Team Flowmaster Trailer Hitch
Baseball Hat Cover
UNIVERSAL FIT Part# 651910
PART# 600210 - black
PART# 600110 - beige
EXHAUST TIPS
Flowmaster’s line of Stainless Steel Exhaust Tips
are a great way to let people know that you have Flow-
masters under your ride! They come in a variety of styles
from brushed to polished and will greatly enhance the
look of your vehicle! 5.00”/4.00”/12”L 3.50”/2.50”/6.75”L
Stainless Rolled Edge R Polished Stainless
** DENOTES FLOWMASTER EMBOSSED LOGO “HUSHPOWER” Laser Etched Logo C6 Corvette Dual Outlet **
R DENOTES WELD ON INSTALLATION REQUIRED Part# 15370 Part# 15369
23
Flowmaster® Inc.
100 Stony Point Road, Suite 125
Santa Rosa, CA 95401
toll free: 800 • 544 • 4761
direct: 707 • 544 • 4761
fax: 800 • 544 • 4784
www.flowmastermufflers.com
TOLL FREE TECH SUPPORT - 800 • 544 • 4761 - FOR HELP WITH YOUR NEXT PERFORMANCE PROJECT