You are on page 1of 1

Deathskull Laboratories!

- Magnavox Odyssey² Video/Audio Página 1 de 1

Home | Lists | Deathskull Labs | Museum | Links

Magnavox Odyssey² Composite & Audio Output


Modification
This one is a snap.

Materials Needed
 [2] RCA jacks
 wire

Procedure
Choose a place to mount the jacks. It's tempting to slap them somewhere on the back of the unit, but that
would probably interfere with the Voice module. I drilled two holes in the side of the top half of the shell
for mine.

There's no point in producing schematics for this one.

Audio output = junction of C45 and R49


Video output = junction of C44 and R7

One wire from each of the above points to the center post of an RCA jack, outside conductor of the RCA
jacks to ground, badaboom badabing, away you go.

Jay Tilton
06/28/98

http://web.archive.org/web/20060317145118/users.erols.com/tiltonj/games/tech/o2av.html 17/6/2010

You might also like