You are on page 1of 41

STREET

TOOLS
BikeMaster ®

BikeMaster® MULTI TOOLS


EXHAUST • These are REAL quality tools, you can feel it from the minute you open the tool
• There is NO PLAY in the hinges, which are beautifully sprung
TIRES & • All the tools are made from stainless steel, with either quality wood, or aluminum bodies
WHEELS • They are made so well, you will be handing these down to your kids

SPORT BIKE

WINDSHIELDS

CRUISER &
TOURING

SEATS &
LUGGAGE
BikeMaster®
DECALS & BikeMaster® BikeMaster® WOOD HANDLE MULTI TOOL
GRAPHICS WOOD HANDLE WOOD HANDLE MULTI • Medium plus size with wood insets and
a polished stainless steel body
MINI MULTI TOOL TOOL SMALL L.E.D. LIGHT • Additional utility of outside access to
CONTROL • Making sure that you always have at • Medium size, wood inset and blades and tools without opening the
least a blade, a file, a flat head and beautifully polished stainless steel body pliers
cross head screwdriver • All the usual tools, which include spring • With the benefit of smooth grips when
• Along with small spring loaded needle loaded pliers, a 3” blade, a straight open in the pliers mode (which has wire
SUSPENSION nose pliers, a saw, a can and bottle and cross head screwdrivers, a can cutters)
openers, and an awl opener, a file, a saw, ruler, and awls • Complete with heavier duty tools and
• Folds up into a compact package of • Also hides a powerful miniature L.E.D. blades than standard medium body
DRIVE about 2-1/2” long light knives
15-1651 $9.95 15-1652 $14.95 • Features a can opener, straight and
cross head screwdrivers, and a 4mm
BRAKE square driver, saw, file, and ruler
combo, bottle opener, sharp and
smooth awls, and a 3” blade
ENGINE 15-1653 $14.95

FUEL & AIR

ELECTRICAL

CHEMICAL

SECURITY BikeMaster® BikeMaster®


& COVERS WOOD HANDLE MULTI BRIGHT ALUMINUM/
TOOL LARGE L.E.D. LIGHT RUBBER HANDLE BikeMaster®
TRAILER & • Our largest bodied tool with wood insets
STANDS
MULTI TOOL RED ALUMINUM/RUBBER
and polished stainless steel construction • Technical style with polished aluminum
• Additional utility of outside access to blades body with high grip rubber inserts HANDLE MULTI TOOL
TOOLS and tools without opening the pliers • Outside access to blades and tools • Super high tech style with red anodized
• With the benefit of smooth grips when without opening the pliers aluminum body with black inserts
open in the pliers mode (which has wire • High quality stainless steel tools and • Additional utility of outside access to blades
SHOP cutters) blades in a medium plus body and tools without opening the pliers
SUPPLIES • Complete with heavier duty tools and blades • Complete with heavier duty tools and • High quality stainless steel tools and
than standard medium body knives blades than a standard medium body blades, in a medium body
DISPLAY • Features a can opener, straight and knives • Complete with 2-1/2” blade plus a
& PROMO cross head screwdrivers and a 4mm • Features a can opener, straight and 2-1/2” serrated saw/knife blade
square driver, saw, file, and ruler cross head screwdrivers and a 4mm • Features an opener, straight and cross
combo, bottle opener, sharp and square driver, saw, file and ruler head screwdrivers, 4mm square driver,
CROSS
REFERENCE smooth awls, and a 3” blade combo, bottle opener, sharp and file and ruler combo, bottle opener,
• Hides a powerful miniature L.E.D. light smooth awls, and a 3” blade sharp and smooth awls
15-1654 $19.95 15-1656 $14.95 15-1658 $14.95
1356

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOL KITS

EXHAUST

TIRES &
WHEELS

SPORT BIKE
BikeMaster®
MULTI TOOL
BikeMaster® WITH SOCKETS WINDSHIELDS
17-PIECE TOOL KIT • Compact, rounded and
ready to work for you
• Designed specifically for • Pen type tire gauge CRUISER &
metric vehicles • 5 cable ties • 6 hex wrenches (2, 2.5, 3, 4, 5, 6mm) TOURING
• Great for bikes that have a • Electrical wire • 8, 10, 15 mm open end wrench
poor or no tool kit with them • Mechanic’s safety wire • 1/4” driver with ball detent to secure sockets
• Don’t get caught on the road • 10 piece metric hex key set • 8, 9, and 10mm sockets SEATS &
tool-less, this could save you (1.5, 2, 2.5, 3, 4, 5, 5.5, 6, LUGGAGE
• All in a compact package that fits easily in your fanny,
a long walk 8 and 10mm sizes) backpack or tank bags
• Open ended wrenches: • Flashlight • Comes in a handy belt loop carrier with hook and loop closure DECALS &
11, 12, 13, 14, 16 and • 6-in-1 screwdriver 15-1657 $9.95 GRAPHICS
17mm sizes • 21mm spark plug socket
• 10mm combination wrench • 18 mm spark plug socket
• 6” adjustable wrench • Spark plug gap gauge CONTROL
• 3/8” drive ratchet wrench • Electrical tape
• Locking pliers • Tool bag
15-1553 $65.95 SUSPENSION

DRIVE
BikeMaster®
MULTI FUNCTION
BRAKE
POCKET TOOL (10 FUNCTIONS)
• Aluminum body for lighter weight
• Anodized for corrosion protection and great looks
• Compact size packs multi function utility ENGINE
• Equipped with 2, 2.5, 3, 4, 5, and 6mm hex wrenches plus an
8mm hex tip, cross head and flat head screwdrivers
• All this and it fits in the palm of your hand FUEL & AIR
15-1590 $14.95

ELECTRICAL
WINDZONE GREAT ESCAPE™ TOOL KIT
• Lightweight and compact, the only motorcycle tool kit in the MOTION PRO ®
world small enough to wear on your belt, yet big enough to
repair 95% of all roadside mechanical emergencies
“MP” TOOL CHEMICAL
• Can be used to remove
• 2 specially-designed multi-tools, metric and SAE hex bits, as 8, 10, 12 & 14mm bolts,
well as Torx and numerous slotted and phillips screw bits #2 & #3 phillips screws, SECURITY
• Kit includes: Ultima-Tool™ Multi-Tool, Essenti-Tool™ Multi-Tool small and medium straight-slot & COVERS
and various bits screws and 5 and 6mm allen bolts
• All stainless steel • Includes a 1/4” and 3/8” socket driver
Ultima-Tool™ Multi-Tool Essenti-Tool™ Multi-Tool TRAILER &
• 10mm and 12mm 1/4”-drive sockets included STANDS
• Adjustable wrench • Needle nose pliers • Tool can be enhanced by adding your own 1/4” or
• Needle nose pliers • Small knife blade 3/8” drive socket attachments
(spring loaded) • Flat screwdriver • Includes convenient carrying case
• Large knife blade • File 15-8161 $59.95 TOOLS
• Wood saw • Wire-cutter/stripper
• Flat screwdriver • Hole punch
• File • 10mm wrench SHOP
• Wire cutter/stripper • Scissors SUPPLIES
• Bit driver with adapter
Various Bits Included: DISPLAY
• Slotted screwdrivers: 1/8”, 5/32”, 3/16”, 1/4” MSR® & PROMO
• Phillips screwdrivers: #0, #1, #2, #3 MULTI TOOL KIT
• Metric hex keys: 2mm, 2.5mm, 3mm, 4mm, 5mm, • 2-way speed ratchet
5.5mm, 6mm • 8, 10 and 12mm 6-point sockets CROSS
• SAE hex keys: 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, • 4, 5 and 6mm allen heads REFERENCE
7/32”, 1/4” • #2 phillips screwdriver and #2 slot head screwdriver
• Torx: T8, T9, T10, T15, T20, T25, T27, T30, T40 • Mounted in compact carrier 1357
49-0877 $34.95 34-2103 $24.95

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
CruzTOOLS ®

EXHAUST

TIRES &
WHEELS

SPORT BIKE

WINDSHIELDS CruzTOOLS® ROADTECH™ M3 TOOL KIT


• This tool kit has the metric cruiser rider covered
• This kit is essentially the Econo Kit M1 and MiniSet™ MSMI
CRUISER & combined into a handy roll-up pouch
TOURING • While the M3 kit is aimed at cruisers, it’s equally at home on
tourers, sport bikes and standards CruzTOOLS®
• Put this kit in your fork bag, tank bag or saddlebag and you
SEATS &
will be ready for just about anything
DMX™ FANNY PACK TOOL KIT
LUGGAGE • The ultimate offroad tool kit
15-4008 $84.95
• Complementing the long list of tools and other items is a stout
DECALS & and functional pouch with 5040 denier nylon shell, top grade
GRAPHICS hardware and zippers, plenty of storage, including a mesh
cash and document pocket and key clip
15-4010 $99.95
CONTROL

SUSPENSION CruzTOOLS®
OUTBACK’R™ M14
• 4 hex heads (3, 4, 5 and 6mm)
DRIVE • 2 screw drivers
• Socket driver with 8, 10 and 12mm sockets
• 13 and 14mm open end wrenches
BRAKE • 3 spoke wrenches
• Weighs 9 oz. and is 3.5” long
15-4013 $19.95
ENGINE

FUEL & AIR


CruzTOOLS®
ELECTRICAL
MINISET™ COMPACT METRIC KIT
• Precision 48-tooth ratchet with extension and 8-piece socket set
• Contains the most common metric sizes, including hex and
phillips bits
CHEMICAL • Tools are top grade polished chrome and stored in a durable
molded box
15-4009 $44.95
SECURITY
& COVERS
CruzTOOLS® DMX2™ TOOL KIT
TRAILER & • The ultimate fender-mounted tool kit
STANDS • Similar to the DMX1 except it contains a socket set for the
PackWrench instead of the mini T-driver
• Includes fender mount and rain fly
TOOLS 15-4016 $114.95

SHOP
SUPPLIES CruzTOOLS®
ECONO KIT® M2
DISPLAY • Major upgrade in quality
& PROMO
and content over O.E.M. kits CruzTOOLS®
• Contains the exclusive
CROSS Power Drive combination BMW KIT
REFERENCE wrenches, plus a host of • A specialized tool kit for BMW bikes
other essentials • Torx® bolt wrenches, and even a female Torx® wrench
1358 15-4011 $39.95 • Top grade tools in a sturdy roll-up pouch
49-0954 $119.95
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS
MOTION PRO®
PLASTIC TUBING & SPORT BIKE
HOSE SHEARS
• Scissor action, for fast cutting of
thin-wall and small diameter vinyl IMPERIAL BikeMaster® WINDSHIELDS
or nitrile type tubing MULTI CRIMP
• Teflon-coated tool steel blades can be
HOSE CLAMP TOOL
resharpened
• Pinches off fuel lines when changing filters LEVER PLIERS CRUISER &
• Prevents fuel loss and spillage • Professional crimpers come with the
06-2013 $36.95 TOURING
15-1301 $12.99 perfect jaw for each type of connector
• Made from hardened tool steel, they
will last a lifetime SEATS &
LUGGAGE
15-1660 $64.95

DECALS &
GRAPHICS
BikeMaster®
HOSE REMOVAL PLIERS CONTROL
• Taking off tight fitting fuel, vacuum and
coolant hoses can be a real challenge...
Worse if they are old BikeMaster® SUSPENSION
• Simply insert between the hose and the 2-PC HEAVY-DUTY STEEL
fitting (or grip the hose) and apply HOSE REMOVER
gentle pressure • Made of heat treated vanadium steel
ACCEL 300+ CRIMP DRIVE
• Hose slides off with no damage • Heavy-duty HEAVY-DUTY TOOL
15-1644 $19.95 15-1545 $20.95 • Hardened steel frame, molded
non-slip hand grips BRAKE
• Adjustable ratchet mechanism
• Includes 3 removable stripping/
crimping die type jaws: One for spark
ENGINE
plug 7-9mm wires and 2 styles for
primary wire terminals
21-0782 $90.99
FUEL & AIR

ELECTRICAL

15-8419 15-8420 15-8421 IMPERIAL OPEN BARREL CHEMICAL


MOTION PRO® TERMINAL TOOL
HEX SETS • A 5-station crimper for most open
• 180° swivel head with extra long barrel terminals found on motorcycles SECURITY
handle for accessing hard to reach 15-1303 $23.99 IMPERIAL WIRE TOOLS & COVERS
places • Crimps spark plug distributor
• Pivot design allows for easy rotation and coil terminals TRAILER &
around obstructions • Strips 7 and 8mm ignition wire plus STANDS
• Pivot design allows you to keep the 10-18 AWG
wrench and fastener engaged when 15-1304 $28.99
access is limited TOOLS
• Great time saver
• Heat-treated alloy tool steel
• Chrome-plated finish SHOP
• Includes heavy-duty folding canvas SUPPLIES
storage pouch
• Takes up less storage space than a
typical hex key set BikeMaster® DISPLAY
• Hex set includes 3/16, 7/32, 1/4, WIRE STRIPPERS NGK & PROMO
5/16 and 3/8 inch wrenches • Strips 4 insulation or wire diameters: CABLE SPLICER
• Torx set includes T-25, T-27, T-30,
T-40, T-45 and T-50 wrenches 1.0, 1.6, 2.0 and 2.6mm • Splices NGK cables to sealed CDI CROSS
• Fast and clean removal of insulation systems REFERENCE
Description P/N Retail
SAE Hex Set 15-8419 $43.95 • Automatic clamping and length gauge • Saves the expense of replacing the
Metric Hex Set 15-8420 45.95 facility ensure uniformly stripped ends entire ignition system 1359
Torx Hex set 15-8421 49.95 15-1533 $20.95 38-1024 $7.73

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

BikeMaster® BikeMaster®
WINDSHIELDS 1/4” T-HANDLE WRENCH 1/4” COMPACT SLIDING
WITH SOCKETS AND SWIVEL AND FOLDING T-HANDLE
• Heat-treated chrome vanadium steel
• Heat-treated chrome vanadium steel • Chrome-plated for durability and long life
CRUISER & • Chrome-plated for durability and long life
TOURING • Sliding and folding T-handle makes for
• Black chrome coating for a great look a compact tool
and an easy find in the tool box • Comes with sizes 8, 10, 12, 13 and
SEATS & • T-handle has ball bearing detent socket 14mm short sockets
LUGGAGE holders on each leg • T-handle has ball bearing detent socket
• Also has a 1/4” drive swivel for access holders on each leg
to tight spaces • 6-point sockets for a sure fit
DECALS & 15-1584 • Metric version comes with sizes 8, 10,
GRAPHICS 12, 13 and 14mm black 6-point sockets 15-1587 $21.95
• Standard version comes with 5/16”,
3/8”, 7/16”, 1/2” and 9/16” black
CONTROL sockets
Description P/N Retail 15-1574
Metric 15-1585 $28.95
SUSPENSION Standard 15-1586 28.95
15-1575
15-1583
DRIVE
15-1576
BikeMaster®
BRAKE 9-PIECE SECURITY L-TORX & S-TORX BikeMaster®
WRENCH SET AND HOLDER L-HANDLE BALL END HEX WRENCH
• Made from precision drawn chrome vanadium tool steel • These wrenches allow you to apply that extra torque that is
ENGINE • Extremely accurate machining makes for a perfect fit sometimes needed
• Has security hole in the center • Made from heat-treated tool steel
• L-Torx has extra long reach that allows access to obscured • Corrosion-resistant coating
bolts, and more torque • Extremely accurate dimensions for a perfect fit
FUEL & AIR • S-Torx is a short version that allows access to tight spaces • Ball end for reaching that hidden bolt at an angle
• Bead blasted surface for better grip • Impact-resistant plastic handles
• Corrosion-resistant coating Description P/N Retail
ELECTRICAL
• Includes a durable holder 4mm 15-1574 $7.95
• Comes with sizes T10, T15, T20, T25, T27, T40, T45 and T50 5mm 15-1575 7.95
Description P/N Retail 8mm 15-1576 8.95
L-Torx 15-1583 $29.95
CHEMICAL S-Torx 15-1584 28.95

SECURITY 15-1580 15-1582 15-1579 15-1581


& COVERS

TRAILER &
STANDS
BikeMaster®
TOOLS
BikeMaster® 9-PIECE L-BALL END HEX WRENCH SET
S-BALL END HEX WRENCH SET AND HOLDER
AND HOLDER • Made from precision drawn chrome vanadium tool steel
SHOP • Made from precision drawn chrome vanadium tool steel • Extremely accurate drawing makes for a perfect fit
SUPPLIES • Extremely accurate drawing makes for a perfect fit • Extra long with ball end allows angled reach and access to
• Short with ball end allows angled reach in tight places obscured bolts
• Bead-blasted surface for a better grip • Bead-blasted surface for a better grip
DISPLAY
• Corrosion-resistant coating • Corrosion-resistant coating
& PROMO
• Includes a durable holder • Includes a durable holder
• Metric comes with sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm • Metric comes with sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm
CROSS • Standard comes with sizes 1/16, 5/64, 3/32, 1/8, 5/32, • Standard comes with sizes 1/16, 5/64, 3/32, 1/8, 5/32,
REFERENCE 3/16, 5/16, & 3/8 3/16, 5/16, & 3/8
Description P/N Retail Description P/N Retail
1360 Metric 15-1580 $17.95 Metric 15-1579 $24.95
Standard 15-1582 17.95 Standard 15-1581 24.95

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
MSR® WHEELS
3-WAY SOCKET
• Compact sizing for easy fit
in many fanny packs
MSR® SPORT BIKE
• Solidly built from chrome REMOVABLE SOCKET
vanadium tool steel for T-HANDLE BikeMaster®
corrosion resistance • Perfect fanny pack tool WINDSHIELDS
and durability • Features removable socket T-HANDLES
• 8, 10, 12mm sockets are welded in place • Comes with 8, 10, 12, and 13mm sockets • Made from the highest quality Chrome
34-2102 $18.95 • Can be used with other socket sizes you Vanadium Tool Steel, 360° Mig CRUISER &
have in your tool box Welded shaft to handle TOURING
34-0478 $20.95 • Shot peened, ground, and plated finish,
for strength and longevity; with sockets SEATS &
formed to shaft! LUGGAGE
• Complete with the most popular sizes of
17, 14, 13, 12, 10, 8, 6 and a “Engine DECALS &
Case Screw” size cross head GRAPHICS
screwdriver
• All in a heavy-duty nylon carry case
with hook and loop closures CONTROL
15-1661 $49.95
MSR® SUSPENSION
T-HANDLE TOOL SET
• Chrome vanadium
• Includes 6, 8, 10, 12, 13, 14 and MSR® DRIVE
17mm sizes 3-WAY ALLEN
• Includes #3 phillips • Comes complete with 4, 5 and 6mm
• Heavy-duty vinyl carrying case allen heads swaged on ends of tri-allen
77-2704 $46.95 34-2101 $18.95 BRAKE

ENGINE

FUEL & AIR

CruzTOOLS®
POWER DRIVE™ ELECTRICAL
CruzTOOLS® 3-WAY 1/4” SLIDING T-DRIVER
PACKWRENCH • Standard 1/4” drive tip
• Compact T-style wrench to fit • At about 7”, it can be easily carried on CHEMICAL
into a fanny pack or under your bike
the seat • Sliding “T” feature
BikeMaster® • 3 sizes: 8mm, 10mm, 12mm • Polished chrome finish SECURITY
& COVERS
3/8” MULTI-JOINT SHAFT • Heat treated sockets with a 15-4012 $16.95
polished chrome finish
DRIVE RATCHET WRENCH 15-4007 $14.95 TRAILER &
• Not a swivel head, but an articulating
shaft with either a speed wrench handle STANDS
or ratcheting handle means that it can
fit and function where others just will not
• If you can get the socket on the nut, you TOOLS
can get it undone!
• The ergonomically designed comfort
handle rotates and drives the shaft SHOP
• Or pull out the telescoping handle with SUPPLIES
multi-joint shaft drive and you’ve got
even more torque! DISPLAY
• Made from forged chrome vanadium BikeMaster®
steel BikeMaster® 3/8” DRIVE T-HANDLE SET
& PROMO
• This is a professional quality tool 1/4” DRIVE T-HANDLE SET • Made of heat treated vanadium steel CROSS
• Multi-layer chrome for years of service • Made of heat treated vanadium steel • Comes with 8mm, 10mm, 12mm,
and good looks • Comes with 6mm, 8mm,10mm,12mm, REFERENCE
13mm, 14mm, 17mm and
• Works just like a standard ratchet 14mm and #2 phillips socket #2 phillips socket
wrench if you need it to • Fits in fanny pack 15-1547 $15.95 1361
15-1562 $45.95 15-1546 $12.95
SEE CATALOG UPDATES AT
TOOLS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

WINDSHIELDS
MOTION PRO® MOTION PRO®
DRIVE T-HANDLES T-HANDLE RATCHET MOTION PRO®
CRUISER & • Allows optional ways to use any 1/4” • Compact design allows for use DUAL L-HANDLE DRIVERS
TOURING in tight confines • Impact-resistant, ergonomic, molded
or 3/8” drive attachments such as
sockets, hex drives, crows foot or • Comfortable grip handle reduces hand fatigue
SEATS & • Patented design • Use handle drive to tighten/loosen
swivels
LUGGAGE Description P/N Retail fasteners and shaft drive for quick
• Made from chrome-vanadium tool steel installation/removal of fasteners
with carbon steel T-handles 1/4” 15-8231 $28.95
• Mini’s are compact 7-5/8” shaft length
DECALS & • Lifetime manufacturer’s replacement 3/8” 15-8226 28.95
for tight access and easy transport
GRAPHICS warranty • 1-piece, chrome-vanadium tool steel shaft
Description P/N Retail • Use with drive sockets, hex drives,
1/4” Drive (8-1/2” long) 15-8158 $9.95 crow’s foot, swivels, etc.
CONTROL 3/8” Drive (10-1/2” long) 15-8159 12.95 • Durable, hard nickel-pewter finish
• Lifetime manufacturer’s warranty
Description P/N Retail
SUSPENSION Standard 3/8” drive 250mm 15-8361 $16.99
Standard 1/4” drive 250mm 15-8363 15.99
Mini 3/8” drive 195mm 15-8362 16.99
DRIVE Mini 1/4” drive 195mm 15-8364 15.99

BRAKE

MOTION PRO® RACER MOTION PRO®


ENGINE
MINI T-HANDLE 6MM T-HANDLE SCREW DRIVERS
• Compact size for easy transport • Same design features as the
• European fasteners Motion Pro® T-handle sockets but with
FUEL & AIR • OEM hose clamps phillips bits MOTION PRO®
15-8401 $11.95 • Set of 3 phillips: #1, 2 and 3 RACER T-HANDLE DEEP
15-8146 $16.95
ELECTRICAL
SOCKET SET
• Includes 8, 10, 12 and 14mm sockets
and #2 and #3 phillips screwdrivers
• Lifetime manufacturer’s replacement
CHEMICAL warranty for sockets
15-8145 $57.95

SECURITY
& COVERS

TRAILER &
STANDS MOTION PRO® MOTION PRO®
T-HANDLE SOCKET T-HANDLE DEEP SOCKETS
TOOLS • Nickel-pewter finished chrome-vanadium, • Made from chrome-vanadium tool steel
deep-well • Deep 6-point sockets with carbon
• 6-point sockets with carbon steel handles steel T-handles MOTION PRO®
SHOP • The slim outside diameter of the sockets • Lifetime manufacturer’s replacement 5-PIECE T-HANDLE SET
SUPPLIES allow access to tight areas warranty • 5-piece set includes 8, 10, 12, 13
• Lifetime manufacturer’s warranty Description P/N Retail and 14mm sizes
Description P/N Retail 8mm 15-8128 $11.95 • Compact size for easy access
DISPLAY 8mm socket 15-8093 $11.95 10mm 15-8129 11.95 and transport
& PROMO 10mm socket 15-8094 11.95 12mm 15-8130 11.95 • 6-3/4” shaft length
12mm socket 15-8095 13.95 13mm 15-8317 11.99 • Chrome-vanadium tool steel shaft
CROSS 13mm socket 15-8096 13.95 Set (8, 10, 12) 15-8131 34.95 • Durable nickel pewter finish
REFERENCE 14mm socket 15-8097 13.95 Set (8, 10, 13mm) 15-8320 34.95 • Includes a vinyl storage pouch
17mm socket 15-8098 16.95 • Manufacturer’s lifetime replacement
1362 19mm socket 15-8099 16.95 warranty
Set of seven 15-8113 73.95 15-8340 $48.95
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

MOTION PRO® MOTION PRO®


BikeMaster® TRAIL T-HANDLE SET BALL-END T-HANDLE SET WINDSHIELDS
11-SLOT T-HANDLE HOLDER • Compact 1/4” drive folding T-handle • Use T-handle hex to tighten/loosen
• Organizes T-handle wrenches so they • Set includes T-handle and 8, 10, 12 fasteners and ball-end hex on shaft for
and 13mm 6-point sockets CRUISER &
won’t jam in tool box quick installation/removal of fasteners TOURING
15-1617 $19.95 • Comes with nylon carrying case with • Ball-end allows for better access to
internal pockets hard-to-reach allen-head bolts (up to
• Customize with your own 1/4” 25˚ working angle) SEATS &
accessories • Compact 6-3/4” shaft lengths for tight LUGGAGE
15-8297 $33.95 spaces and easy transport
• Chrome-vanadium tool steel shaft DECALS &
and T-Handle GRAPHICS
• Durable hard nickel-pewter finish
• Lifetime manufacturer’s replacement
warranty CONTROL
Description P/N Retail
Set 15-8383 $46.95
4mm 15-8374 13.95 SUSPENSION
5mm 15-8375 13.95
MOTION PRO® 6mm 15-8376 13.95
MOTION PRO® TRI-DRIVE MINI T-HANDLE 8mm 15-8377 14.95
DRIVE
• Use T-handle drive to tighten/loosen
DUAL DRIVE MINI fasteners and shaft drive for quick
T-HANDLES installation/removal of fasteners
• Use with 1/4” drive sockets, hex drives, BRAKE
• Use handle drive to tighten/loosen
fasteners and shaft drive for quick crow’s foot, swivels, etc.
installation/removal of fasteners • 1/4” drive has a compact 6” drive
• Compact shaft length for tight access shaft length ENGINE
and easy transport • Compact size for use in tight spaces
• Chrome vanadium tool steel shafts and is easy to carry
• Use with drive sockets, hex drives, • Includes 8mm, 10 mm, 12mm and
13mm sockets FUEL & AIR
crow’s foot, swivels, etc.
• Durable, hard nickel-pewter finish • Chrome-vanadium tool steel shaft and
• Lifetime, manufacturer’s warranty T-Handle MOTION PRO®
replacement • Durable nickel-pewter finish Ti PROLIGHT WRENCHES™ ELECTRICAL
Description P/N Retail • Lifetime manufacturer’s replacement • Less than 1/4 the weight of a standard
Mini 1/4” Drive 15-8359 $12.99 warranty steel wrench
1/4” Drive 15-8360 14.99 15-8389 $18.95 • Made of tool quality titanium alloy CHEMICAL
• Titanium alloy will never rust or corrode
• Patent pending design to optimize
strength and performance SECURITY
• Laser etched markings for easy & COVERS
identification
• Ergonomic handle
TRAILER &
• Recommended for trail and road tool STANDS
pack use
• Not recommended for everyday
shop use TOOLS
• Set of 4 (P/N 15-8466) contains 8, 10,
MOTION PRO® 12 & 14mm
WALL BRACKET FOR Description P/N Retail SHOP
T-HANDLE RACK Set of 4
8mm
15-8466
15-8461
$99.95
16.95
SUPPLIES
• For mounting the T-Handle Tool Rack
(P/N 15-8114) to the side of a toolbox, 10mm 15-8462 21.95
12mm 15-8463 30.95 DISPLAY
wall, post or any flat surface
MOTION PRO® T-HANDLE • Features a quick-release pin for 13mm 15-8464 35.95 & PROMO
TOOL RACK removing and attaching the T-Handle 14mm 15-8465 39.95
• Designed to hold the T-handle socket Rack CROSS
wrenches and screwdrivers • Includes built-in bottle opener REFERENCE
• Hooks onto most tool boxes or trays • Made from heavy-duty 12-gauge
15-8114 $22.95 zinc-plated steel 1363
15-8435 $24.95

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TOOLS

EXHAUST
15-1536

TIRES &
WHEELS

SPORT BIKE BikeMaster®


1/2” DRIVE HEAVY-DUTY
15-1535 STUD EXTRACTOR BikeMaster®
WINDSHIELDS
• Capacity 6 - 19mm 8-N-1 SOCKET WRENCH
15-1532 $24.95 • Forged from durable, drop forged
CRUISER & chrome vanadium steel
TOURING • Turn socket to tip to gain access to tight
spaces
SEATS & BikeMaster® • Turn socket to side to get extra leverage
LUGGAGE WOBBLE EXTENSION BARS • Replaces 8 wrenches or 8 sockets
• Allows sockets to be driven at up to 15˚ • 12-point style means you can index the
off vertical wrench in tight spaces
DECALS &
GRAPHICS • Hardened chrome and polished steel 15-1529 • Fits 10, 12, 13, 14,15, 17, 19 and
Description P/N Retail 21mm sizes
1/4” Sq. Dr. Bar Set 15-1548 $25.95
• Contents: 50, 100, 150, and 250mm long
CONTROL
Bar Set 15-1535 $18.95
3/8” Sq. Dr. Bar Set 15-1528
• Contents: 45, 75, 150, 250 mm
SUSPENSION Bar Set 15-1536 $25.95

DRIVE BikeMaster®
ADJUSTABLE MICROMETER
BRAKE
TORQUE WRENCHES 15-1594
• 3/8” Sq. Dr. marked range (5-80 Ft.Lbs)
• 1/2” Sq. Dr. marked range (10-150 Ft.Lbs)
• Reversible ratchet head
ENGINE • Micrometer-type sleeve allows accurate
BikeMaster® pre-set torque values to be set
Description P/N Retail
10-PIECE 3/8” DRIVE 3/8” Sq. Dr. 15-1528 $60.95
FUEL & AIR METRIC FLARE CROW FOOT 1/2” Sq. Dr. 15-1529 65.95
WRENCH SET ON RAIL 15-1595
• Contents: 10, 11, 12, 13, 14, 15, 16,
ELECTRICAL 17, 18, 19mm
• For use in confined areas
• Carbon steel hardened and heated with
CHEMICAL black finish
15-1530 $40.95
SECURITY
& COVERS BikeMaster®
ADJUSTABLE WRENCHES
TRAILER & • Unique sliding adjustment feature
STANDS • Just place the tool on the bolt or nut,
thumb the slider and it adjusts to the
perfect fit
TOOLS BikeMaster® • No wheel to turn
• Easier to position and reposition than
6, 8, 10, 12MM STUD conventional thumb wheels
BikeMaster® REMOVAL SOCKETS • Carbon steel construction, brass screw
SHOP
SUPPLIES 13-PIECE 1/4” DRIVE • Grip a larger area with rollers to head
SET OF METRIC SOCKETS confidently remove the studs • Metric and standard dimension etched
on tool
DISPLAY ON SOCKET RAIL • The socket slips over the stud protecting
it, and allows you to use the force • Extra convenient closed end wrench
& PROMO • Contents: 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, on the end
8.0, 9.0, 10.0, 11.0, 12.0, 13.0 and necessary • Comfortable rubber grip
14.0mm • No risk of open ended wrenches • Black chrome corrosion-resistant coating
CROSS slipping off
REFERENCE
• 6-point sockets Description P/N Retail
• Manufactured from chrome vanadium steel • Rollers are bidirectional, they can just 6” 15-1594 $19.95
• Chrome-plated and fully polished as easily and safely install the studs too 8” 15-1595 24.95
1364 15-1539 $14.95 15-1648 $39.95 10” 15-1596 29.95

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOLS

MOTION PRO® EXHAUST


6MM, 1/4” DRIVE
6-POINT SOCKET TIRES &
• European fasteners WHEELS
• O.E.M. hose clamps
15-0408 $3.95 MOTION PRO®
MOTION PRO® TORQUE WRENCH SPORT BIKE
ADJUSTABLE TORQUE ADAPTER 12MM/14MM
WRENCH ADAPTER • Used to properly torque 2-stroke
• Torque any fastener with a combination cylinder base nuts WINDSHIELDS
wrench or allen wrench • Extends the reach of 3/8” drive torque
• Will work with 6mm (1/4”) through wrench by 3”
19mm (3/4”) combination wrenches • Made from chrome-vanadium tool steel CRUISER &
• Will work with 6mm through 8mm allen with a satin chrome finish TOURING
wrenches • Multiply torque wrench readings by
• Heat-treated steel with a black oxide finish MOTION PRO® chart supplied with tool for proper SEATS &
• 3/8” square drive is rated for a torque specifications
maximum torque of 90 ft-lbs
HOLD-A-NUT 15-8134 $15.95
LUGGAGE

15-8380 $60.95 • Magnetic insert eliminates dropped nuts


and bolts DECALS &
• Lifetime manufacturer’s warranty GRAPHICS
Description P/N Retail
1/4” drive 4-16mm 15-8088 $20.70
CONTROL
MOTION PRO® 3/8” drive 9-19mm 15-8090 20.70
WING-NUT SOCKET SET
• Set includes large and small 3/8” drive SUSPENSION
wing nut sockets MOTION PRO®
• Designed to remove over-tightened or
stuck wing nuts BALL-END ALLEN SET
• Made of chrome-vanadium tool steel DRIVE
• Ideal for use on brake cables and rods
• Can be used with air tools • Sizes available 1.5, 2, 2.5, 3, 4, 5, 6,
15-8224 $35.95 8 and 10mm
MOTION PRO® • Ball end allows for better access to BRAKE
CLUTCH HUB HOLDER allen-head bolts (up to 25° working
• Holds clutch hub while nut is removed angle)
• Also has tangs for holding fly wheel • Convenient holder included ENGINE
sprockets 15-8185 $18.95
BikeMaster® • Adjustment 1” to 5”
15-0465 $31.95 FUEL & AIR
3/8” DRIVE
IMPACT DRIVER
• Removable 3/8” head
ELECTRICAL
• Can be used with standard or deep
3/8” drive sockets or extensions
• 2 flat and 2 phillips bits included
15-0625 $18.95 CHEMICAL

BikeMaster® SECURITY
EXTRA REACH KASTAR & COVERS
ADJUSTMENT LATCH-ON™ 5-PIECE,
SCREWDRIVER 12-POINT, RATCHETING TRAILER &
• Extra long for use with multi bank STANDS
carbs, or any other deep reach needed BikeMaster® BOX WRENCH SET
• Built-in non-slip retaining ring in each
• Gear drive, precision made, hardened HELI-COIL KIT ratchet wheel to create the ultimate in
tool steel bit • Save money and maybe a critical part! speed and safety when turning fasteners TOOLS
15-1578 $27.95 • Can save the day when a thread strips • A nut can be tightened or loosened up to
or is pulled out 5 times faster than with a conventional
• Kit comes complete with 2 high speed wrench or ratcheting wrench SHOP
• Metric Sizes: 7mm-8mm, 9mm-10mm, SUPPLIES
steel drill bits for M8 and M6 holes
• 2 HSS taps (with guides) in the most 11mm-12mm,13mm-14mm,
BikeMaster® popular M8 x 1.25 and M6 x 10 sizes 15mm-17mm DISPLAY
14-IN-1 SCREWDRIVER • Features Helical coil inserter tools, Helical
• Standard Sizes: 1/4”-5/16”, 3/8”
7/16”, 1/2”-9/16”, 5/8”-3/4”,
& PROMO
• Great multi-purpose tool coil tab removers, ratchet T-wrench to
• Better than the usual multi tip 11/16”-7/8”
use with the taps and Helical tools • Exceeds GSA torque specification CROSS
screwdrivers
• 12 different tips on 12 shafts • 3 different lengths of M6 and GGG-W-001405 for torque capacity REFERENCE
• Driver shaft is a 4mm socket wrench 2 different lengths M8 Helical Coils Description P/N Retail
• Has 1-meter tape measure in head • All in a convenient plastic carrying case Metric 15-1244 $79.95 1365
15-1559 $13.95 15-1640 $159.95 Standard 15-1247 79.95

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS
MSR® 6-IN-1 BikeMaster®
SCREWDRIVER 4-PIECE MINI HOOK BikeMaster®
SPORT BIKE • Fits conveniently into fanny packs
• 2 phillips and 2 flat blade
AND PICK SET LONG NECK NON-MAGNET
• Designed to ease the removal of O-rings,
screwdriver sizes split pins, seals and bushes and loose parts
HEAD THIN LIGHT
WINDSHIELDS • 6mm socket wrench (for carb jets) • Light right where you need it! Even
• Contents: Awl, Clevis - pin remover, ‘L’
• 8mm socket wrench (for side panel inside a cylinder
and ‘V’ hooks
and shroud bolts) • Thin L.E.D. technology means
CRUISER & 34-2100 15-1534 $10.95
$9.95 illumination in even the smallest spaces
TOURING • Narrow enough to put the light in, and
still see past the head
SEATS & • Couple this with the long flexible
LUGGAGE extension and there is almost nowhere
you can’t see
DECALS & • Included is a powerful magnetic base so
GRAPHICS that you can locate the light and still be
RAS HANDLEBAR BikeMaster®
hands free
• Extension stays where you bend it
CONTROL GRIP TOOL™ SHORT NECK MAGNET 15-1646 $29.95
• The fast and easy way to install or
remove handlebar grips HEAD THIN LIGHT
• No cutting and no mess • Like our Long Neck Light, but with a
SUSPENSION magnetic twist
• Works with any compressed air source
• Sold as a pack of 4, retail • Light right where you need it! Even
priced individually inside a cylinder, but with a magnet on
DRIVE 15-1202 $28.95 ea. the end BikeMaster®
• This thin head means illumination in TELESCOPIC MAGNET LIGHT
even the smallest spaces and a way to • Narrow head fits almost anywhere
BRAKE get that fallen screw • Low consumption, super bright LED
• Narrow enough to put the light in, and • Ergonomic grip handle
still see past the head • Chrome telescopic tubes for long life
ENGINE • Couple this with the flexible extension, 15-1659 $9.95
and there is almost nowhere you can’t
see or pick up
• Included is a powerful magnetic base so
FUEL & AIR
that you can locate the light and still be
hands free
• Extension stays where you bend it BikeMaster®
ELECTRICAL 15-1647 $29.95
BikeMaster® HEAVY-DUTY FLEX MAGNET
WORK LIGHTS PICK-UP TOOL
CHEMICAL • These compact folding units throw out • Flexible shaft holds shape
so much light you’ll be able to work on • Retrieve at hard-to-reach angles and
anything around obstructions
SECURITY • Will lift over 3 lbs
& COVERS • Comes in 2 styles, the first is operated
by AA batteries, and so doesn’t have 15-1537 $15.95
the extra weight
BikeMaster®
TRAILER & • Second come as a rechargeable, with L.E.D. FLASHLIGHT
STANDS both a cigarette lighter or a wall outlet • Ultra bright white light
power adaptors • Very long battery life (3 AAA batteries)
• Rechargeable is a little heavier, but it’s • Satin chrome finish
TOOLS • Water-resistant (sealed with O-rings)
always ready to go
15-1564 $19.95
• Both units come with a powerful magnet
SHOP built in to secure them to any convenient
SUPPLIES metal surface MOTION PRO®
• Plus, their heads tilt and stay in position MAGNETIC FINGER
DISPLAY so you can angle the light perfectly GLOVE/DISPLAY
& PROMO • They automatically turn on when you • Holds small metal objects
open them, and off when closed • Great for starting or removing fasteners
• Matt black rubberized finish for a non- BikeMaster® in hard to reach places
CROSS
REFERENCE
slip grip 3-PIECE 230MM BRUSH SET • 2-way stretch spandex
Desription P/N Retail • Brass, nylon and stainless steel brushes • Leatherette bottom and fingertip
Non-rechargeable 15-1662 $9.95 • Plastic handles • Stretch finger panels
1366 Rechargeable 15-1663 19.95 15-1538 $9.95 • Card of 6, priced individually
15-0491 $12.15 ea.
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

WINDSHIELDS
PARK TOOL USA
ALUMINUM VISE INSERT
• Provides a safe way to hold small CRUISER &
suspension shafts and fittings securely TOURING
without damage
• Aluminum jaws have 3 machined SEATS &
openings to hold small suspension LUGGAGE
shafts and fittings from 7mm-15mm
• Bridge spring allows the tool to DECALS &
automatically open GRAPHICS
15-1257 $26.95
PARK TOOL USA
STEERING RACE PRESS CONTROL
• Easily and accurately presses steering
head tube races, eliminating damaged
or misaligned bearing races SUSPENSION
PARK TOOL USA • Helps prevent dented and chipped
frames
FRAME/HANDLEBAR • Permits quick tool installation and DRIVE
STRAIGHTENER release after races are seated
• Open hook design enables it to • Now fits Gold Wing
straighten handlebars and subframes 15-1255 $200.95
• Vinyl coating on the hook and on the PARK TOOL USA BRAKE
fulcrum pad protects painted surfaces PP-1 PISTON PRESS
• Hook has over 8” of adjustments • Slides between the brake pads inside a
15-1256 $82.95 caliper allowing the user to spread the ENGINE
pads and compress the pistons when
servicing pads or wheels
• The PP-1 expands the gap between the FUEL & AIR
pads, making it easy to insert the disk
between the pads when re-installing a
caliper or wheel ELECTRICAL
• “Sure Grip” dual density handle
provides a positive grip
15-1259 $18.95
CHEMICAL

SECURITY
& COVERS

MOTION PRO® TRAILER &


FORK ALIGN TOOL STANDS
• Quick and easy-to-use method of
aligning your front forks to insure they
are parallel TOOLS
• Knurled adjustment screws for easy
PARK TOOL USA PARK TOOL USA setup
STEERING RACE REMOVER STEERING TUBE • Improve handling characteristics of
SHOP
SUPPLIES
• This tool makes head tube bearing race motorcycle
removal easy BEARING INSTALLER • Reduce seal and bushing wear
• Tool is pulled through the steering tube • Offers a safe approach to lower • Will work on 27mm - 62mm fork legs DISPLAY
until the flared ends snap in behind bearing installation & PROMO
and fork tubes
the race • Utilizes specially designed, aluminum • Will work on forks that are 150mm to
• A blow from a hammer on the tool inserts to quickly and accurately install 220mm on center CROSS
head removes the race nearly any lower bearing including • Patent pending REFERENCE
Description P/N Retail 1800 Gold Wings 15-8412 $34.95
Fits 35-55mm 15-1250 $32.99 • Reduce the risk of damage to the bike 1367
Fits 26-35mm 15-1258 32.99 15-1254 $75.95

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
SUSPENSION TOOLS

EXHAUST

07-0605
TIRES &
WHEELS

SPORT BIKE

RACE TECH RACE TECH 07-0661


WINDSHIELDS
FORK SPRING PRO SHOCK PROGRESSIVE®
COMPRESSOR
CRUISER & • Designed to work on most current sport
NITROGEN GAUGE SUSPENSION
• Special chuck allows proper charging
TOURING
bikes and road racers of shocks MINI GAUGE PUMP
• Allows the spring to be compressed • Reads from 0 to 300 psi • Perfect for air forks and air shocks
SEATS & while the fork cap is removed from 77-2646 $129.99 • Flexible hose
LUGGAGE the rod • Check valve prevents pressure drop
77-2640 $129.99 when pump is removed
DECALS & Description P/N Retail
GRAPHICS 0-30 psi gauge 07-0661 $51.95
0-60 psi gauge 07-0660 51.95
0-100 psi gauge 07-0662 51.95
CONTROL

SUSPENSION

DRIVE
Mounting Tab
(For Vise Clamping)
RACE TECH MOTION PRO®
BRAKE SHOCK SPRING FORK OIL LEVEL GAUGE
COMPRESSOR • Easy and accurate fork oil level
Safetygate Hinge Pin
• Designed to work on almost all offroad adjustment and measurement on
ENGINE and most current sport bike applications conventional and inverted forks
• Provides easy removal and installation • Adjustable ring will measure oil levels
Shock Spring “Shutter”
of most shock springs without touching for 0-300mm in 0.5mm increments
FUEL & AIR the spring collars, and features a safety • Syringe capacity of 60ml
shaft-locking device 15-8121 $29.95
77-2660 $99.99
ELECTRICAL
Razorback in use with
piggyback shock.
CHEMICAL (Shock Not Included)

K&L RAZORBACK
SECURITY SHOCK SPRING TOOL
& COVERS PRE-LOAD • Single shocks, dual shocks, even
SPANNER WRENCH piggyback reservoir shocks can be
TRAILER & • 3/8” drive designed to easily adjust safely handled with this tool
STANDS shock pre-load rings • Its safetygate system encloses the entire
07-0636 $8.95 shock while the spring is being
compressed, eliminating the chance of
TOOLS a spring breaking free under load
MOTION PRO® DAMPING • Has a tab for clamping in your bench
SHOP ROD BLEED TOOL vise, making spring changes safe,
SUPPLIES • Tool allows for effortless retrieval of simple, and profitable
damping rod after spring installation 29-2292 $337.99
• Perfect for working on Kayaba, Showa
DISPLAY
& PROMO
and WP inverted forks CruzTOOLS®
• Packaging includes tube for convenient
tool storage STAINLESS SHOCK SPANNER
CROSS 15-8337 $40.99 • Tough stainless steel
REFERENCE • Compact enough to fit inside tool kit
• Designed to fit most major makes of
1368 shocks
15-4015 $9.95
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
SUSPENSION TOOLS

EXHAUST

TIRES &
WHEELS
15-1127
15-1027 SPORT BIKE

MOTION PRO®
PRO BLEEDER WINDSHIELDS
• Fits most Kayaba and Showa™ MOTION PRO®
upside-down forks with O.E. bleeder DELUXE SUSPENSION
screws (M5 x 0.8) CRUISER &
• Easy to install - simply replace the O.E. BEARING SERVICE TOOL TOURING
bleeder screw with the Pro Bleeder • Designed for quick and easy removal
• Set includes 2 Pro Bleeder valves with and precise installation of suspension SEATS &
adapters, O-rings and instructions linkage and swingarm pivot bearings MSR® SAG SCALE LUGGAGE
(installed height of 7/8” or 22mm) • Designed for use on 20 & 22mm I.D. • Simplifies shock preload measuring
Description P/N Retail bearings • Easy-to-read millimeter scale on one
• Fits most offroad motorcycles and ATVs DECALS &
Bleeder 15-1127 $20.95 side and inches on the other GRAPHICS
Bleeder Valve Only 15-1027 7.95 • Includes blind bearing collet for removal 34-0277 $29.95
of 20mm blind bearings
• Kit includes Blind Bearing Puller adapter
CONTROL
which can also be used as an accessory
with the Motion Pro® Blind Bearing
Remover set
• Anodized aluminum mandrels reduce the SUSPENSION
possibility of damaging bearing surfaces
• Laser etched markings for easy size
identification
• Eliminates the need for a shop press MOTION PRO® DRIVE
• Protective blow-molded case for easy FOLDING SAG SCALE
storage • 6061-T6 aluminum construction
15-8294 $164.95 • Rigid folding design fits in most BRAKE
RACE TECH tool boxes
SAG MASTER™ • Stainless steel hinges
• Allows you to measure • Direct reading scale (no subtracting ENGINE
“Race Sag” without subtraction required) with white background and
• Useful in determining proper spring black lettering
rates and monitoring linkage and • Adjustable zero set point with extended FUEL & AIR
seal drag range
77-2625 $9.99 • Will work on mini and full size bikes
• Inch and metric scale combination
• Installs in rear axle ELECTRICAL
• For shock and fork sag
15-8336 $35.95
CHEMICAL

SECURITY
& COVERS

MOTION PRO® TRAILER &


SWINGARM MOTION PRO® STANDS
MOTION PRO® BEARING TOOL
COMPRESSION • Designed for installation and removal of T-STEM NUT WRENCH
the swingarm bearings on late model • Allows for loosening of the T-stem nut TOOLS
BOLT REMOVAL TOOL Japanese motorcycles without removing the handlebars
• For removing and installing the • Using the correct size insert and the • The opposite spanner allows for
compression valve assembly from the puller, the bearing can be drawn in or adjustment of the T-stem bearing SHOP
fork cap out of the swingarm without damaging it without moving the triple clamps SUPPLIES
• 17mm hex head with a hammer Application P/N Retail
• Made from billet 6061 T-6 aluminum 15-8213 $76.95 Honda 15-8232 $39.95 DISPLAY
• Orange anodized finish with laser Kawasaki 15-8233 39.95 & PROMO
engraving Suzuki 15-8234 39.95
• Made in USA Yamaha 15-8035 39.95
15-8436 $32.95 CROSS
REFERENCE

1369

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
SUSPENSION TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE MOTION PRO® MOTION PRO®


FORK SEAL BULLETS DAMPER ROD FORK TOOL
WINDSHIELDS
• Protects the fork seal and wiper on
inverted forks from damage by the
MOTION PRO® • Perfect for disassembly and assembly of
bushing groove during installation FORK SEAL DRIVERS most Kayaba and Showa™ inverted
forks in 41, 43, 46 and 47mm
• Eliminates the need to wrap the fork • Easy installation on either conventional
CRUISER & or inverted forks • 2 tools in one, one side for Kayaba
TOURING tube with tape forks and the other side for Showa™
• Manufactured from plated carbon steel
• Set of 7 includes 36, 41, 43, 45, 46, • Split design and weighted body forks
47mm and 48mm • Sold individually • Not needed for 91-92 Honda CR
SEATS & • Available separately models
LUGGAGE Description P/N Retail
Description P/N Retail 35/36mm 15-8221 $63.95 15-8117 $37.95
Set 15-8272 $67.95 39mm 15-8170 64.95
DECALS & 36mm Red Bullet 15-8273 9.95 41mm 15-8123 66.95
GRAPHICS 41mm Blue Bullet 15-8274 9.95 43mm 15-8124 62.95
43mm Green Bullet 15-8275 9.95 45mm 15-8125 66.95
45mm Yellow Bullet 15-8276 9.95 46/47mm 15-8138 66.95
CONTROL
46mm Black Bullet 15-8277 9.95 48mm 15-8331 59.99
47mm White Bullet 15-8278 9.95 49/50mm 15-8171 69.95
48mm Orange Bullet 15-8332 9.99
SUSPENSION
MSR®
STEERING STEM &
DRIVE
FORK CAP WRENCH
• 30-32mm steering/fork cap wrench
allows access with handlebars in place
BRAKE • 12-point design on steering/fork cap
NITROGEN NEEDLE wrench for easier tool placement
• Used to charge shocks with self-sealing 34-2104 $19.95
ENGINE valves
• Adapts to Nitrogen Shock Gauge
to fill rear shocks
FUEL & AIR
06-8075 $24.95

ELECTRICAL NOLEEN
FORK TRAVEL GAUGE
• Easily measures the amount of fork travel
CHEMICAL • For case order 12
PROGRESSIVE® 19-6254 $6.95
SECURITY
SUSPENSION
& COVERS FLUID LEVEL ADJUSTER
• An easy way to fill or adjust fluid volumes if the filler
TRAILER & hole is small
STANDS • This versatile tool works with forks or transmissions
77-0920 $15.95

TOOLS
BikeMaster®
SHOP
FORK SEAL INSTALLERS
SUPPLIES • 2-piece fork seal installer
• Evenly installs the seal into its seat
without damage to the seal or forks
DISPLAY RACE TECH • Nylon inserts insure a frictionless sliding
& PROMO SHOCK SEAL movement
HEAD SETTING TOOL RACE TECH • Variable diameter means it covers more
CROSS • Allows easy removal and installation of FORK SEAL DRIVERS sizes
REFERENCE shock seal assemblies • For inverted and conventional forks Desription P/N Retail
• 40-46mm • 48/47mm 32-47mm 15-1641 $59.95
1370 77-2695 $44.99 77-2656 $74.99 49-50mm 15-1642 59.95

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS
34-2110
BikeMaster®3-WAY 34-2111 SPORT BIKE
PLUG WRENCH MSR® AXLE WRENCHES
• Includes sizes for front and rear axle
• Fits all 10, 12 and 14mm spark plugs
• 6-point design on rider wrenches for
• Sold individually; for box order 10 MSR® WATER-COOLED firm grip on axle nuts WINDSHIELDS
15-0335 $7.95 PLUG WRENCH • Compact designs for easy fanny pack
• Low-profile design for easier access carrying
34-2110 $8.95 CRUISER &
Description P/N Retail TOURING
17mm x 24mm 34-2105 $19.95
MSR® STANDARD SPARK 17mm x 27mm 34-2106 19.95
SEATS &
PLUG WRENCH 19mm x 27mm 34-2107 19.95
LUGGAGE
• Standard design for open areas 22mm x 27mm 34-2108 19.95
34-2111 $6.95 32mm x 22mm 34-2109 19.95
DECALS &
GRAPHICS
MOTION PRO® 4-STROKE
SPARK PLUG TOOL
• Specially designed for water-cooled CONTROL
4-strokes with 5/8” plugs
• 2-step extension, swivel or fixed
• Socket can be used with a screwdriver
to hold the front 19mm hex axles of
MOTION PRO® SUSPENSION
late model 4-strokes 13/16” EXTENSION SOCKET
15-8239 $22.95 • 13/16” extension socket for #15-8147
15-8291 $10.99 DRIVE

KASTAR
MOTION PRO® RETRACTABLE TEST LEADS BRAKE
SPARK PLUG SOCKET • For testing electrical circuits
• Specially designed for Honda XR400s • Retractable test leads pull out and stay
as a trail tool at desired length ENGINE
• The socket is designed to fit into the • Rewind test leads when not in use
plug cavity and allow the user to choose • Insulated alligator clips
between the Motion Pro® spark plug KASTAR • 18-gauge copper wire FUEL & AIR
ratchet wrench, a 3/8” ratchet or 12MM SPARK PLUG 15-1224 $14.95
13/16” wrench as well as a tool kit bar RETHREADER
or phillips screwdriver through a • Used to clean-up dirty or damaged ELECTRICAL
8.5mm hole for removal and installation spark plug threads
• Will work on other XRs and bikes with • 5/8” hexagon with O-ring female
18mm spark plugs 3/8” square drive
• Other Applications: Honda: XR500R CHEMICAL
15-1226 $17.95
83-84, XR600R 92-98, XR650L 93-00.
KTM: 400SXC 2000, 620LC4 96-97,
SECURITY
620SX 97-98, 640 LCA 99. & COVERS
Yamaha: XT225 92-99, TT600 85
15-8175 $22.95
TRAILER &
STANDS
KASTAR SPARK PLUG
RAMP GAUGE TOOLS
AND DISPLAY
• Handy Ramp Gauge hangs on a
KASTAR EZ GRIP PLUG keychain SHOP
SUPPLIES
GAP GAUGE • Gauge covers all spark plug gapping
MOTION PRO® RATCHET • Pocket clip feature keeps ramp gauge at requirements from .020 to .100
DISPLAY
fingertips • Metric gapping scale shown on
SPARK PLUG WRENCH • Ramp gauge covers all spark plug reverse side & PROMO
• Made specifically for water cooled
2-stroke motorcycles gapping requirements from .020 to .080 • Available in an attractive counter
• Easy installation and removal of the • Metric gapping scale shown on display CROSS
spark plugs reverse side • Retail priced per gauge REFERENCE
• Use one side for installation and flip it • Specifically designed recess to adjust • 50 gauges per display, retail priced
over for removal ground electrodes individually 1371
15-8147 $18.95 15-1210 $5.95 15-1211 $2.22 ea.

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS

MOTION PRO®
SPORT BIKE CARB ADJUSTMENT TOOL
• For use on Honda, Kawasaki, Suzuki
and Yamaha multi-cylinder bikes MOTION PRO® PILOT
WINDSHIELDS • Fits both Keihin and Mikuni carbs SCREW ADJUSTING TOOL
15-0469 $20.95 MOTION PRO® • Fits most applications
CRUISER & FCR CARB TOOL • Features an angled head for those
TOURING • Contains longer bits for reaching into hard-to-reach pilot screws
recessed cavities to adjust Keihin FCR • Sold individually
carburetors 15-8119 $29.95
SEATS &
LUGGAGE • Ideal for trail riders and garage
mechanics alike
15-8181 $14.95
DECALS & MOTION PRO®
GRAPHICS
T-6 FLOAT BOWL WRENCH
• Designed to remove 17mm float bowl
CONTROL drain plugs
• Made from lightweight 6061
T-6 aluminum
• Compact design to carry in your
SUSPENSION tool pack MOTION PRO®
• 12-point hex and low profile design for PERMANENT BRASS
tight access
DRIVE 15-8366 $18.95 MOTION PRO® ADAPTERS
• Can be permanently installed on
PERMANENT motorcycles that only have a plug in the
BRAKE
HOSE ADAPTERS vacuum port
• Designed for permanent installation into • Eliminates the need to install adapters
the vacuum ports on the intake manifold before every carburetor synchronization
• Once installed, the hoses can be routed • Rubber caps are included to seal
ENGINE to an easily accessible location vacuum
• Reduces time necessary for carburetor Description P/N Retail
synchronization 5mm 15-8218 $7.95
FUEL & AIR • Sold individually 6mm 15-8219 7.95
MOTION PRO® Description P/N Retail
MINI-T CARB TOOL 5mm 15-8216 $11.95
ELECTRICAL • Designed to fit into fanny pack to take 6mm 15-8217 11.95
care of those “on-the-trail” jet changes
• Includes 1 piece each of #2 phillips bit,
CHEMICAL
#1 straight slot bit and 6mm hex socket
15-8136 $17.95

SECURITY
& COVERS

MOTION PRO® GAS TANK MOTION PRO®


TRAILER &
STANDS QUICK DISCONNECT FUEL SYSTEM QUICK
COUPLING DISCONNECT COUPLING
• Featuring Viton O-ring for leak-free • Straight through no shut off
TOOLS MOTION PRO® application • Available for 1/4” & 5/16” I.D. fuel line
90° HEX DRIVER • Fluid is cut-off when halves are • Capable of withstanding temperatures
of -40°F - 180°F
SHOP • High-grade aluminum and stainless steel separated
Description P/N Retail
SUPPLIES • Designed for hard-to-reach pilot air screws • May be used with any type of gas or
5/16” 15-0991 $20.95
• Gear-driven 1/4” hex racing fuel
• Includes 5, 1/4” hex drive bits • Sold individually 1/4” 15-0493 17.95
DISPLAY straight-slot, phillips, D-shaped pilot
& PROMO Description P/N Retail
screw, 6mm hex jet and Single Shut-Off
1/4”-hex-to-1/4” drive 1/4” I.D. 06-1229 $20.95
CROSS • Can be used with any 1/4” or 6mm 5/16” I.D. 06-1230 21.95
REFERENCE hex bits
Dual Shut-Off
• Max torque is 50 in. lbs.
• Limited 1 year manufacturer’s warranty 1/4” I.D. 15-0990 $28.95
1372 5/16” I.D. 15-0992 33.95
15-8229 $89.95

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
FUEL SYSTEM ACCESSORIES

EXHAUST

TIRES &
WHEELS

SPORT BIKE

WINDSHIELDS

MOTION PRO® CRUISER &


TOURING
AUXILIARY FUEL TANK
• For shop use when tuning with gas tank removed
• Takes the place of the regular fuel tank while SEATS &
synchronizing carbs
MOTION PRO® LUGGAGE
• Screw on top with O-ring seal DELUXE AUXILIARY FUEL TANK
• Includes 4 feet of 1/4” fuel line and in-line petcock • Redesigned to be used on fuel-injected models as well as DECALS &
03-1500 $53.95 standard carburetors GRAPHICS
• The petcock has been upgraded for easier opening and closing
• The bottle has been correctly graduated for those who want to
measure exact amounts of gear oil or other fluids CONTROL
15-8189 $84.95

SUSPENSION

MOTION PRO® DRIVE


SyncPRO™
• Precise 4 channel vacuum indicator designed
specifically BRAKE
for intake synchronization of engines with
multiple carburetors or throttle bodies
• Mercury free design
• Includes manometer fluid, hoses, 5mm adapters, ENGINE
MOTION PRO® in-line restrictors and instructions
COOLANT RECOVERY SYSTEM Description P/N Retail
• Prevents loss of coolant due to overheating SyncPro Carb Tuner 15-0411 $115.95 FUEL & AIR
• Used on most water-cooled motorcycles, snowmobiles 6mm Short Brass Adapters
and ATVs (set of 4) 15-8168 12.95
• Designed for hot weather or high 5mm Brass Adapters Honda/Suzuki
altitude riding conditions (set of 4) 15-0438 14.95 ELECTRICAL
• Mounts to frame or behind number plate 6mm Brass Adapters Yamaha
• Includes 8 oz. bottle, hoses, clamps, mounting strap (set of 4) 15-0442 14.95
and instructions Replacement Hose Set 15-8014 11.99 CHEMICAL
06-0025 $33.95 Refill 15-0415 5.95

SECURITY
& COVERS

TRAILER &
STANDS

TOOLS
29-2278 29-2279 29-2280
SHOP
K&L SUPPLIES
CARB SYNC ADAPTERS
Description P/N Retail DISPLAY
5 x 0.80mm Thread, 170mm Length (2 piece) 29-2278 $28.99 & PROMO
5 x 0.80mm Thread, 98mm Length (2 piece) 29-2279 28.99
6 x 0.85mm Thread, 53mm Length (2 piece) 29-2280 23.99
CROSS
6 x 1.0mm Thread, 60mm Length (4 piece) 29-2281 46.99 REFERENCE
29-2281
1373

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
EXHAUST TOOLS
15-1616
EXHAUST

TIRES &
WHEELS

SPORT BIKE MSR® 15-1615


SILENCER PLUG
• Protects silencer packing during washing BikeMaster®
WINDSHIELDS • Turning the handle expands the plug RUBBER MUFFLER PLUGS
Application P/N Retail
2-Stroke 34-0276 $8.50 • Protects the exhaust system from water
during pressure washing, keeps
CRUISER & 4-Stroke 34-0599 10.95
PROGRIP®
TOURING humidity from entering pipe as it cools
SILENCER PLUG down or prevents condensation inside
• Silencer plugs are made of soft rubber the pipe during storage
SEATS & • Display contains 6 2-stroke and • Formulated to be stiff enough to not fall
LUGGAGE 6 4-stroke plugs out but soft enough to insert into the
Application P/N Retail pipe without damage
DECALS & 2-Stroke 17-7851 $4.99
4-Stroke 17-7852 5.99 • Small fits most 2-stroke applications
GRAPHICS • Large fits most 4-stroke applications
Display 17-7824
• Display includes 6 small and
6 large plugs
CONTROL
MOTION PRO® Desription
Small
P/N
15-1615
Retail
$3.95
SPRING HOOK Large 15-1616 4.95
SUSPENSION • Will remove exhaust pipe springs, tank
or seat hold in springs, cotter pins and 12-Pack Display 15-1686 49.95
many other hard to access parts MOTION PRO®
06-8065 $9.95
DRIVE HEAVY-DUTY SPRING HOOK
• Specifically designed to handle large
diameter side-stand springs on
BRAKE street bikes
• Security added to grip when applying
tension to the spring
ENGINE 15-8127 $17.95

FUEL & AIR FMF WASHPLUG


• Now available from FMF the Washplug
CruzTOOLS® P.O.P. display box with 20 plugs
MSR® • Each plug includes “Remove before
ELECTRICAL MAXHOOK™ SPRING HOOK
HEAVY-DUTY flight” flag
• The tip is CNC-machined, using heat- SPRING HOOK • Sold as a kit. Throw it away and order
treated carbon steel another when it’s empty
CHEMICAL • PVC-coated handle
• Take the danger and difficulty out of
removing and installing the exhaust • Will fit most 2-stroke and 4-stroke bikes
15-4014 $9.95 • Sold in a box of 20, retail priced
pipe springs on your machine
SECURITY • Heavy duty construction individually
& COVERS 34-2112 $9.95 27-8050 $4.49

TRAILER & BikeMaster ® FEELER GAUGE SETS


STANDS

TOOLS
BikeMaster®
SHOP BikeMaster® 32-BLADE
SUPPLIES 12-BLADE DUAL READING
COMBINATION TAPPET COMBINATION FEELER
DISPLAY
AND FEELER GAUGE SET GAUGE SET BikeMaster®
& PROMO
• Blades: dual marked 0.203mm/0.008” • Dual marked 0.03mm/0.001” to 20-BLADE METRIC
to 0.660mm/0.026”
CROSS • 4” long taper blades, hardened and 1mm/0.040” FEELER GAUGE SET
REFERENCE • 4” long taper blades, • Contents: 0.05-1.0mm
polished hardened and polished • 4” long blades, hardened and polished
• 3 pack • 2 pack • 3 pack
1374 15-1525 $6.95 15-1527 $9.95 15-1526 $7.95

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
VALVE & TIMING TOOLS

EXHAUST

MOTION PRO®
TIRES &
MULTI-VALVE TOOLS WHEELS
• Used to install valve spring keepers
• Replaces the large cumbersome valve MOTION PRO®
spring compressor
TAPPET ADJUSTMENT BikeMaster® SPORT BIKE
• Designed to fit the valves of 4 and 5
valve-per-cylinder heads (5mm valve WRENCH SET VALVE CLEARANCE
stem diameter or smaller) • Chrome-plated heat-treated steel ADJUSTABLE WRENCHES WINDSHIELDS
• The perfect accessory is our flexible • Fits any screw type tappet adjuster with • Manufactured from Heat Treated
nylon magnetic pickup tool and our 8, 9 or 10mm adjusting nut combined, Hardened Tool Steel
impact tool with either a 3 or 4mm, square or • Chrome plated for a durable long
• Made in the USA CRUISER &
straight screw driver type lasting finish TOURING
15-8165 $115.95 adjusting screws • Color coded non-slip coated handles
• Interchangeable parts allows for 9 for easy use and recognition
different combinations • Comes with 3 hex wrench sizes, 8, 9, SEATS &
15-0460 $43.95 LUGGAGE
or 10mm and 3 interchangeable
MOTION PRO® adjustment heads (3 and 4mm square,
TIMING PLUG plus straight blade) DECALS &
GRAPHICS
WRENCH • Means you have 9 different combinations
available to cover most bikes
• For straight slot timing covers
• Designed for hard-to-reach timing plugs KASTAR • Comes as complete set
CONTROL
15-1643 $39.95
• 3 blade sizes: 16, 22, and 38mm 14-BLADE VALVE
15-8087 $22.95
LASH GAUGE SET
• 14-piece set of 4” x 1/4” feeler gauge SUSPENSION
blades, thickness .002” through .015”
• Used to check valve clearances of small
BikeMaster® diameter bucket and shim type BikeMaster® DRIVE
ALUMINUM TIMING valve trains VALVE SPRING
• Stored in bi-fold pocketed pouch with COMPRESSOR
DEGREE WHEEL Velcro® closure • Fully adjustable for just about any head BRAKE
• Made from durable, thick, 6061-T6 • Straight blades can be bent for custom
aircraft aluminum sheet and valve height
applications • Fully closed 2-3/4” (7 cm) to fully open
• 7” diameter with large, highly
visible markings 15-1222 $19.95 9” (23 cm) give a broad range ENGINE
• Extremely accurate marking makes 15-1649 $69.95
getting timing right the first time easy
• Lightweight and coated with
durable finish FUEL & AIR
• Can be used for crankshaft positioning,
ignition, and camshaft timing
15-1639 $18.95 MOTION PRO® ELECTRICAL
TAPPET FEELER GAUGES IMPERIAL VALVE
• Sold by card (6 pcs)
MOTION PRO® Size P/N Retail SPRING COMPRESSOR CHEMICAL
002”/.003” 15-8052 $28.95 • Compact cage design
DEGREE WHEEL 004”/.005” 15-8053 32.95 15-1300 $72.99
• Manufactured from .052” thick
aluminum with a 6-3/4”diameter and a 006”/.008” 15-8054 32.95 SECURITY
6mm center hole Assorted & COVERS
• Used for checking ignition and Set (2 each of the above sizes) 15-0826 $32.95
camshaft timing TRAILER &
15-8092 $19.95 STANDS
MOTION PRO®
MOTION PRO® KTM FEELER GAUGE/SPARK TOOLS
VALVE SPRING PLUG GAP TOOL
• For checking intake and exhaust valve
MOTION PRO® COMPRESSOR clearance (0.12mm/0.005in) SHOP
• Improved quick action design
VALVE SHIM TOOL • Both cup-type and ball-type tips are
• For checking the spark plug gap SUPPLIES
• For changing valve adjustment shims (0.60mm/0.024in)
included
• Made in the USA • Angled and tapered blade for easy access
• Replaces 07757-001000 and DISPLAY
HONDA P/N Retail • Makes valve and spark plug gap
AKS-215-0101 O.E.M. tool & PROMO
CB750/900,CBX 15-0431 $18.95 adjustments quick and easy
• Accepts Motion Pro® adapters
KAWASAKI • Packed 6 per display card, retail
(15-8248) as well as O.E.M. adapters CROSS
KZ750/1000/1100/1300 15-0468 $9.95 priced individually
07GME-KT0200, 07JME-KY20100 REFERENCE
SUZUKI Application P/N Retail
and 07959-KM30101 for use in “shim-
GS550/750/850/1000 15-0430 $18.95 250/450/525
under-bucket” and small diameter valve
YAMAHA spring keeper applications
4 strokes 02-05 15-8378 $10.99 ea. 1375
XS750/850/1100 15-0464 $15.95 15-8247 $119.95
SEE CATALOG UPDATES AT
TOOLS
STREET
TOOLS
CALIPERS & PLIERS

EXHAUST

TIRES &
WHEELS

SPORT BIKE
BikeMaster®
DUAL-READING
WINDSHIELDS
DIGITAL DIGITAL CALIPER
• Hardened stainless steel
VERNIER CALIPERS • Reading 0.01mm and 0.0005” PARK TOOL USA
CRUISER & • A quality, precise, high-tech measuring • Range 0-150mm / 0-6”
TOURING device 15-1531 $80.95
DIGITAL CALIPER
• LCD display • Displays metric, decimal inch and
SEATS & • Measures up to 150mm or 6” fractional inch to 1/128”
LUGGAGE 42-0446 $79.95 • Large LCD display
• Measures external, internal, depth and
stepped dimensions
DECALS & • Resolution:
GRAPHICS
+/- 0.01mm/0.0005”/1/128”
• Accuracy:
CONTROL +/- 0.02mm/0.001 (-100mm)
• Repeatability: +/- 0.01mm/0.0005”
• Protective case and battery included
• Includes 1 battery, size SR44
SUSPENSION
• Automatic shut off
• Weight: 2 lbs.
15-1260 $58.95
DRIVE

MOTION PRO® MOTION PRO®


BRAKE IGNITION SYSTEM TESTER SNAP RING PLIERS
• Tests the integrity and strength of • Economical pliers that easily open snap
ignition system rings or clips from the inside and outside
ENGINE 15-8122 $11.95 • Includes 3 extra sets of tips, 1 additional
straight tip and 2 offset or angled tips
15-8186 $15.95
FUEL & AIR

ELECTRICAL

CHEMICAL

SECURITY
& COVERS KASTAR
2-PC. RETAINING RING
TRAILER & PLIERS SET
STANDS • Convert between internal and external
BikeMaster® MOTION PRO® with a quick flip of a switch
TOOLS SNAP RING PLIERS SET MASTER CYLINDER • Each pliers includes a tip kit containing
SNAP-RING PLIERS 5 pairs of durable alloy, color-coded,
(4 JAWS) interchangeable tips and allen wrench,
• Reduce the frustration and get • Allows removal of internal snap rings
SHOP 8 tools in 1 used in hydraulic master cylinders all stored in a handy pouch
SUPPLIES • The correct tool for the job, avoid lost • Can be used to remove and replace • SAE Straight tips:
and damaged C-Clips small to medium internal snap rings up .023”, .036”, .047”, .070”
to 50mm deep, including those used for • SAE Bent 90° tips:
DISPLAY • 4 Jaws to fit every angle correctly
& PROMO • Will work on internal and external transmission gear locating, bearing .036”, .047”
snap rings retention and oil seal retention • Metric Straight tips:
• Durable hardened steel tips • Applicable to some fork seal retaining .6mm, .9mm, 1.2mm, 1.8mm
CROSS • Spring assisted pliers rings • Metric Bent 90° tips:
REFERENCE • Comfortable molded plastic handles • Replaces 07914-SA50001 and .9mm, 1.2mm
15-1588 $19.95 AKS-316-2010 • Packed in modular foam
1376 15-8279 $29.95 15-1229 $71.95

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
COMPRESSION TOOLS

EXHAUST

TIRES &
WHEELS
MOTION PRO®
MOTION PRO® LEAK DOWN TESTER SPORT BIKE
4-STROKE LEAK • Checks possible air leaks through seals
DOWN TESTER or gaskets on 2-stroke engines
• Complete with air pressure gauge,
• Designed to check percentage of WINDSHIELDS
cylinder leakage in a 4-stroke engine pump-up-bulb and adapter for single
and twin 2-cycle engines
• Can pressurize the cylinder with 60 psi of • Instructions included
BikeMaster® air with one air source of 70 to 160 psi 06-8071 $310.95
CRUISER &
• The gauge will register the total leakage TOURING
BEARING REMOVAL KIT past the rings, head gasket, intake and
• A bearing must be removed at 90° to
exhaust valves SEATS &
its fitted surface, and removed evenly all • Kit includes 10, 12 & 14mm spark plug
the way around LUGGAGE
adapters, regulator and gauge
• So, to avoid damage, or loading the 15-8126 $167.95
bearing too much on one side, use this DECALS &
bearing removal kit MOTION PRO® GRAPHICS
• Comes with collets in the most popular PISTON PIN TOOL
sizes 8, 10, 12, 15, 17, 20, 25, 30 mm • For removing pressed in piston pins
• Complete with slide hammer, and • May be used with engine in frame on CONTROL
comes in a durable plastic storage and single or multi-cylinder engines
carrying case 06-8068 $76.95
15-1645 $194.95 SUSPENSION
MOTION PRO®
COMPRESSION TEST SET DRIVE
• Contains hoses for 10, 12 and 14mm
15-8269 spark plug applications
• Kit includes a quick disconnect with
pressure release valve, 300 psi gauge BRAKE
and plastic carrying case
15-8188 $114.95
15-8260 ENGINE

MOTION PRO® FUEL & AIR


15-8261 PISTON PIN PULLER DELUXE
• Interchangeable piston adapters for use
on both long skirt and short skirt ELECTRICAL
(slipper) pistons
MOTION PRO® • Fits all piston pins from 12mm (1/2”)
ADAPTER/BORE to 24mm (1”) CHEMICAL
15-8262 15-8458 15-8459 PROTECTOR SET • Made of 6061 aluminum with non-
• Set includes 3 adapters and 3 bore marring aluminum adapters and
durable blue anodized finish
MOTION PRO® protectors of use with the quick action
valve spring compressor (15-8247) • Patent pending
SECURITY
& COVERS
BEARING REMOVER SET • 23mm bore protector can be used with 15-8472 $71.99
• Dependable split collect design
• Includes new metric sizes to allow use the small multi-valve tool (15-8165) in TRAILER &
with recent MX and Euro motorcycles shim-under-bucket applications STANDS
• Replacement pieces available • Replaces 2K-07-S04,
• 8 piece set includes large and small 07GME-KT70200, 07959-KM70100,
driver rod 10, 12, 15, 17, 20 and 07JME-KY20100, 07JMG-KY20100, TOOLS
25mm removers 07959-KM 30101 and
Description P/N Retail 07HRMG-MR70002
Bearing Remover Set 15-8269 $58.95 15-8248 $38.95 SHOP
Large Driver Rod 15-8260 16.95 SUPPLIES
Small Driver Rod 15-8261 9.95
10mm Remover 15-8262 3.99 MOTION PRO® STUD
12mm Remover 15-8263 5.95 MOTION PRO® DISPLAY
15mm Remover 15-8264 6.95 INSTALLATION TOOLS CRANKCASE SPLITTER & PROMO
17mm Remover 15-8268 7.95 • Installs the cylinder studs on most • Will work on most 2 and 4-stroke
20mm Remover 15-8266 8.95 motorcycles without damage to the engines with vertically split cases CROSS
25mm Remover 15-8267 10.95 threads • Includes 6 and 8mm mounting bolts REFERENCE
28mm Remover 15-84581 11.95 • Hex head is 3/4” or 19mm
30mm Remover 15-84591 11.95 • Eliminates binding under heavy loads
1 Not included in 8-piece set
• Set of 3 (6, 8, and 10mm)
15-8245 $190.95 1377
15-8152 $23.95

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

K&L K&L K&L


WINDSHIELDS CRANKCASE SEPARATOR CRANKCASE SPLITTING CRANKSHAFT INSTALLING
TOOL TOOL JIG TOOL
CRUISER & • Will work on most 2 and 4 stroke • Designed to remove crankcase halves • Supports and centers crankshaft webs
TOURING engines that have a vertically split on most 2-stroke engines safely while assembling 2-stroke engine
crankcase • Comes with 3 sets of adapter cases and rebuilding crankshafts
• Moveable fingers allow a multitude of mounting bolts: 5 x 0.80mm, • Prevents rod misalignment
SEATS &
LUGGAGE bolt patterns to be used so it will work 6 x 1.00mm, and 8 x 1.25mm • Adjustable tang ends
on a variety of models • Sold as a set 29-2275 $129.99
• Includes 6mm and 8mm mounting bolts, 29-2274 $118.99
DECALS & center pulling bolt and a 3 leg frame
GRAPHICS that is appropriate for many
applications
CONTROL 29-2273 $162.99

SUSPENSION

29-2290
DRIVE
MOTION PRO® MOTION PRO
GEAR JAMMER COUNTER BALANCER
BRAKE 29-2291 • Locks gears in place for easy installation & CLUTCH HUB SPANNER
and removal
K&L • Allows tightening lock nuts to proper
FOR HONDA
• Replaces 20mm end of Honda O.E.M.
ENGINE DIAL INDICATOR GAUGE torque setting tool 07716-0020100
• Works on virtually any motor
& MAGNETIC BASE STAND • Powerful magnet holds tool in place
• Used to remove Honda O.E.M. nut
Description P/N Retail 90231-Ky4-900
FUEL & AIR 2-1/4” Dial Indicator Gauge during use • 4-Pin spanner made of heat-treated steel
with Magnetic Base Stand 29-2290 $56.99 • Billet 6060 T-6 aluminum construction • Inside diameter is 20mm
2-1/4” Dial Indicator Gauge only, • Originally developed for removing • Use with 3/8” driver
ELECTRICAL 0” - 2-1/4” range in .001 increments 29-2315 30.99 and installing the primary gear on a • Fits counter balancer nut on: CRF450R
Flexible Magnetic Base Stand only 29-2291 78.99 Honda CRF450 02-06, CRF450X 2005
• Made in USA • Fits clutch hub nut on: PC50 69-70,
CHEMICAL 15-8427 $18.95 Z50 68-99, S65 65-69
• Fits crank shaft nut on: CA100 (Trail 50)
61-62, CA102 62-69, CA105 (Trail 50)
SECURITY 63-65, CA110 62-69
& COVERS 15-8385 $9.95

TRAILER &
STANDS

HELIX®
TOOLS
RADIATOR FIN
STRAIGHTENER MAGURA
SHOP • This 6-in-1 tool clears and straightens
SUPPLIES fins on radiators and oil coolers that HYDRAULIC CLUTCH
have been damaged or clogged with PRO BLEEDER
DISPLAY debris • Professional bleed kit BikeMaster®
& PROMO • Just select the right fin spacing and • Makes bleeding Magura clutches much CLUTCH & PRIMARY TOOL
restore the fins to their original shape
easier and cleaner • 6mm bolts supplied with 5/8” thru bolt
and spacing
CROSS • Very handy to remove dried mud and • Works with all Jack and O.E.M. • For removing clutch bodies, flywheels,
REFERENCE dead bugs from all types of bikes, clutches (KTM, Husqvarna, etc.) and primary gears
ATVs, and UTVs • Includes all fittings and Magura blood • For mini MX 50cc racers
1378 53-0374 $12.86 86-0128 $111.99 15-0619 $25.95

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
OIL FILTER WRENCHES

EXHAUST

TIRES &
WHEELS

SPORT BIKE
BikeMaster® BikeMaster®
65-80MM ADJUSTABLE OIL FILTER MOTION PRO® WINDSHIELDS
FILTER WRENCH SPANNER WRENCH OIL FILTER WRENCH
• Heavy-duty, forged and machined steel • Can be used with 3/8” drive impact, • Designed to remove and install spin-on
parts air impact, torque ratchet or other oil filters CRUISER &
• Tightens it’s grip on the filter the more drive tools • Fits V-4 Hondas TOURING
torque you apply • Compact 3/4” by 1-3/16” diameter • Fits most other Japanese bikes
• Fits all round filters from 2-3/8” to • 4-stroke Honda singles 90 thru 350cc • Allows you to torque filter to SEATS &
3-1/4” • 4-stroke Honda twins 160 thru 500cc proper spec LUGGAGE
15-1577 $69.95 15-0600 $13.95 15-0419 $9.95
DECALS &
GRAPHICS

CONTROL

SUSPENSION

MOTION PRO®
DRIVE
OIL FILTER STRAP WRENCH
• Fits all spin on type oil filters
06-8069 $9.95
BRAKE
MOTION PRO®
OIL FILTER REMOVAL TOOL ENGINE
• For easy removal of recessed KTM
oil filters
• Conical point screw to pierce and grab
sheet metal end cap FUEL & AIR
• Contoured handle for secure grip
15-8400 $13.95
ELECTRICAL
IMPERIAL OIL FILTER CUP
WRENCHES
• Makes even hard-to-reach filters easy CHEMICAL
to change
Size P/N Retail Size P/N Retail
65mm 76mm SECURITY
• Fram PH6017A • BMW OE#11421460845 & COVERS
• Honda OE# 15410-MM5-013 • (Perf-Form) BMW1
• Kaw OE# 16097-1061, 63, 64 • Harley Davidson® OE# 63805-80A, TRAILER &
15-1324 $9.99 80T STANDS
65/67mm • Harley Davidson® OE# 63806-83
• Fram PH6017A for Hon/Kaw/Yam • (Perf-Form) HD1 MOTION PRO® OIL FILTER
• Fram PH6018 for Suz 15-1320 $9.99
15-1326 $10.99 76mm
& CLUTCH HUB SPANNER TOOLS
• Made of heat-treated steel
68mm • Ducati OE# 090549960
• Suz OE# 16510-06B00, 01 • Use with a 3/8” drive ratchet SHOP
• Moto Guzzi OE# 1415300
15-1327 $9.99 15-1325 $9.99 • Inside diameter is 24mm SUPPLIES
74mm 80mm • Designed to fit oil filter and clutch hub
• Emgo 10-82411 for Harley-Davidson® • Fram PH6010A, PH6016 for HD 80mm on many Honda single and twin
DISPLAY
15-1321 $9.99 • Hon OE# 15400-MJO-003, 004 cylinder models
& PROMO
74/76mm • Hon OE# 15410-MBO-003 NOTE: Fits most pre-78 CB, CL, CT, SL XL
• Fram PH6010A, PH6016, PH6022 • Kaw OE# 16097-1054 models, XR200 80-84, XR200R 81-94,
XR250L 91-94 and XR250R 86-94 CROSS
for HD • Suz OE# 16510-05A00 REFERENCE
• Fram PH6010A for Hon/Kaw • Fram PH6010A for Hon/Kaw 15-8015 $9.95
• Fram PH6016 for Suz • Fram PH6016 for Suz
15-1322 $9.99 15-1323 $9.99 1379

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
BikeMaster ® MAGNETO FLYWHEEL PULLERS

EXHAUST

TIRES &
WHEELS 15-0601 15-0604 15-0606 15-0611 15-0612 15-0614 15-0615

SPORT BIKE

WINDSHIELDS
15-0616 15-0617 15-0618 15-0620 15-0621
CRUISER &
TOURING
15-0628

SEATS &
LUGGAGE

DECALS & BikeMaster® 15-0630 15-0640 15-0641 15-0644


GRAPHICS
MAGNETO FLYWHEEL PULLERS
HONDA P/N Retail
CONTROL Most late model CR 80cc-500cc, CRF/XR/XL 80cc-100cc, XR50R/CRF50F, 50cc-110cc 60-70's 15-0601 $13.95
Most early 4 cylinders, CB750A/K 69-78, CB750F SS 75-78, VF500, XL/XR 200cc & 250cc, XR650R 00-07, XR400R 00-03 15-0614 12.95
Early MX 2 cycle models 15-0605 9.90
SUSPENSION MT250 series, early MX 2 cycle models large diameter 15-0604 9.95
C175/350, CB350, C360, C400, CB500/550, CB650SC/700SC, CM185T/200T, CMX250/450, CM250/450,
CT90, CR125, CR250 early models, SL175/350 15-0612 12.95
DRIVE XL250/350/500/600/650R, XR250R/350/500/600R, VT500/500C/750C, VF500/700/750C/750F/750S/1100C/1100S,
V45/65, FT/GB500, NT, NX650, TL250, VFR750 15-0611 12.95
Most 79-82 4 cyl. Models CB750K/900C/1000, CB400T/450T/750K/900/900F SS/1000/1000C/1100F SS, CX500/650 15-0617 13.95
XR185/200/200R, XL125/185S/200, CB125 15-0606 11.95
BRAKE
CB400A/T 78-79, CB450SC, CM450, CMX450C, CX500/650, GL500/650, MR250, NX250, PC800,
VF700C 87-88, VF750C/1100C, VT700C/750C/800C 15-0621 13.95
Most 50cc-80cc mini's - QA50, MR50, CH80, CR60 & 95-Up RS125 15-0644 17.95
ENGINE CRF150R/RB, CRF250R, CRF250X, CRF450R (not for CRF450X) 15-0680 30.95
CRF450X 15-1610 21.95

FUEL & AIR HUSQVARNA


FEMSA, BOSCH, MOTOPLAT, 70-80 2 cycle w/CDI 15-0639 $18.95
WX 2 cycle Enduro 90-Up 15-0611 12.95
ELECTRICAL 4 cycle 250/450/510 TE, TC, SM, SMR 15-0624 16.95

HUSABERG
CHEMICAL FE250/FE650 4 cycle 15-0624 $16.95

KAWASAKI
SECURITY Most MX 2 cycle & late 4 cycle. KV75, MC190, G4T90/100, F6-125 Enduro, KD80, KM100, KE100/125/175, KDX80,
& COVERS KDX200/250/300, KX60/80/125/250/500 15-0601 $13.95
KLR250 85-95, KLR600A/B 84-86, KLR650A 87-95, KL650B 90-91, KLX250, KLX300 (20mm) 15-0614 12.95
TRAILER & KLR250 85-95, KLR600A/B 84-86, KLR650A 87-95, KL650B 90-91 (22mm) 15-0611 12.95
STANDS KL250, KZ250/400/440/550/650/750, KZ900A4/5/B1 76-77, KZ1000A/B 77-80, KZ1300A/B 81-85, EX250/500, EN500,
GPZ550/750/1100, VN750, ZX7600/750 15-0618 13.95
ZX600 Ninja, ZXRS600 Late models 15-0641 53.95
TOOLS 50 Mini 15-0644 17.95
KX250F, KX450F 15-0680 30.95
KLX450 15-1610 21.95
SHOP
SUPPLIES KTM
FEMSA, BOSCH & MOTOPLAT, 2 cycle liquid cooled w/internal rotor 15-0639 $18.95
DISPLAY 250/400/450/525/620 EXC, MXC, SMC, SX 1988 to current 4 cycle 15-0624 16.95
& PROMO 50 SX/SR 15-0616 23.95
50 SX/SR 15-06191 25.95
CROSS Electric Single Cylinder 620/625/640/660/690 LC4E 15-0682 52.95
REFERENCE 65 SX 99-04, 85 SX 04, 105 SX 04, 125/144 SX/EXC/MXC 98-08 200 EXC/MXC 98-05,
250 SX/EXC/MXC 98-05, 250/300/380 SX/EXC/MXC 97-05 2 cycle 15-0601 13.95
1380 1 7 hole disc w/6mm bolts to remove clutch bodies, flywheels & primary gears

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
BikeMaster ® MAGNETO FLYWHEEL PULLERS
MINI RACERS P/N Retail
LEM 50 LX, KTM 50 SX/SR, All Ducati 15-0616 $23.95 EXHAUST
Action Attack/Outlaw, KTM SX/SR, Cobra BM/CM, LEM CR/LX 15-06191 25.95

SUZUKI TIRES &


RM80, RM125, RM250, RMX250 88-Up, early 2 cycle 50/70/80/90/100/120/125 15-0601 $13.95 WHEELS
DR250, DR350/350S, GSF400 Bandit, GS1000, GS1100 (1" internal depth) 15-0640 38.95
DR250, DR350/350S, GSF400 Bandit, GS1000, GS1100 (3" internal depth) 15-0641 53.95 SPORT BIKE
TM125/250/450, TS250 early model (3" external depth) 15-0620 30.95
50 Mini 15-0644 17.95
RMZ250, RMZ450 15-0680 30.95
RMZ450 2008 15-1610 21.95 WINDSHIELDS

YAMAHA CRUISER &


AT125, CT175, DT250, RT360, SC500, IT200, YZ250/400/490, TT/XT500, YZ250F 04-08, YZ400F/426F, YZ450F 03-05 15-0601 $13.95 TOURING
YZ125 Liquid Cooled 15-0605 9.90
YZ/MX125/250/360, RD250/350/R5 15-0604 9.95
XV500/535/700/750/920/1100 Virago, XVZ12/13 Venture & Venture Royale, BW200/350, TT/XT600 15-0628 40.95 SEATS &
LUGGAGE
FZR400, XJ550H/J/K/RH/RJ/RK, FJ600L/LC/N/NC, FZ600S/SC/T/TC/U/UC, FZR600, XJ650G/H/J/K/LH/LJ/LK/RJ,
XJ700N/NC/S/SC, FZR750RT/RU, XJ750J/K/MK/RH/RJ/RK, XJ900RK/1100J, FZR1000, FJ1100/L/LC/N/NC/1200,
Most early 2 cycle electric start, most 4 cycle models, current YZF's 15-0612 12.95 DECALS &
XT350 15-0641 53.95 GRAPHICS
WR450F 04-09 15-0682 52.95
WR250F 03-09, WR450F 2003 15-0683 18.95
CONTROL
YZ450F 06-08 15-0680 30.95
1 7 hole disc w/6mm bolts to remove clutch bodies, flywheels & primary gears
SUSPENSION

DRIVE

FLYWHEEL PULLERS BRAKE

ENGINE

MOTION PRO®
MAGNETO FLYWHEEL PULLERS FUEL & AIR
• Heat treated
HONDA P/N Retail
CB175/CT90/350G/360/500/5005, 15-0462 $10.95 ELECTRICAL
CM185/200T/450, CMX250, 15-0462 10.95
Early SL175/350 15-0462 10.95
XL80/100/100S/170, 15-0463 15.95
FL250 15-0463 15.95 CHEMICAL
Single Cylinder TX/XL/XR/FT, NX250 Through 600 models, TL250 76, 06-8074 9.95
XL250, K1, K2, XL250 76, XL350, K1, 06-8074 9.95
SECURITY
XL350 76-78, XL350R 84-85, FT500 82-83 Ascot, GB500 89-90, 06-8074 9.95 & COVERS
VF500C 84-85, VT500C 83-86, VT500FT 83-84, XL500S 79-81, 06-8074 9.95
XL500R 82, XL600R 83-87, XL600V 06-8074 9.95
89-90 Transalp, VF700/750/1000/1100 06-8074 9.95 TRAILER &
KAWASAKI STANDS
KH400A, KLF300 86-87 15-0462 $10.95
KZ1000/1300, Z1 15-0462 10.95
KD80, KX80, KDX80, KM/KS100, KS125, 15-0463 15.95 TOOLS
Most large rotor flywheel models and early ignition point flywheel engines 15-0463 15.95
SUZUKI
GS550/650/750 Early 1100, Most 4 cycle street models 15-0462 $10.95 SHOP
50/70/50/90/100/125cc Trail & Street models 15-0463 15.95 SUPPLIES
YAMAHA
Most 4 cycle street models & 250/350 Electric Start 2 cycle Twins, 15-0462 $10.95 DISPLAY
FZ600, FZR600/750/1000, TT225, XJ550/650/700/750/900, 15-0462 10.95 & PROMO
FJ600/750/1000 15-0462 10.95
Most single cylinder off road enduros, MX, YZ & Quads W/External Flywheels, 15-0463 15.95 CROSS
1968 & later, BW80, Riva 50, PW50, YSR50, YT125/175, YZ400F, 15-0463 15.95 REFERENCE
RZ350 IT350/500, XT500/600
1381

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
FLYWHEEL PULLERS

EXHAUST 15-8321

TIRES &
WHEELS
15-8116
SPORT BIKE
MOTION PRO® MOTION PRO®
FLYWHEEL PULLER FLYWHEEL PULLER
WINDSHIELDS FOR HON/KAW/SUZ • Heat treated for durability
KAWASAKI Retail
• Fits Honda: CB750 (69-78), most XL250R
• Kawasaki: KLR250, KLR600 and KLR650 Fits: KZ200, KZ250, EX250, KL250, KZ400, KZ440, MOTION PRO® BLIND
CRUISER &
TOURING • Suzuki: SV650 (99-01) and SV650S
EN500, EX500, KZ550, GPZ550, ZX600, KZ650, BEARING REMOVAL SET
(01-02) GPZ750, VN750, KZ750, KZ900, KZ1000, KZ1100, • Set includes 30, 25, 20, 17, 15, 12, 10
• Thread 20mm X 1.5 R.H. internal thread GPZ1100, KZ1300 and 8mm collets
SEATS & 15-8085 $10.95 15-8116 $10.95 • 2 pound hammer
LUGGAGE SUZUKI • Crossbar type shaft allows easy collet
Fits: DS650 removal
15-8321 $28.95 • Fitted storage box included
DECALS & • Necessary tool for most transmission
GRAPHICS rebuilds
15-8292 $255.95
CONTROL

SUSPENSION

MOTION PRO®
DRIVE 20MM FLYWHEEL PULLER MOTION PRO®
FOR HONDA FLYWHEEL PULLER
• Fits CB400A/T (78-79), CB450SC, FOR 4-STROKE KTM
BRAKE
CM450, CMX450C, CX500TX, CX650, • Replaces O.E.M. tool 580.12.009.000 MOTION PRO® ROTOR/
GL500/650, MR250, NX250, PC800, • Includes shaft protector cap SPROCKET HOLDER
VF700C (1987), VFR800FI (98-00) (O.E. reference 510.12.016.000) • Keeps flywheels, rotors and sprockets
ENGINE VTR250 • Thread 26mm X 1.0 R.H. internal thread from rotating while removing or
15-8086 $11.95 15-8293 $20.95 tightening their fixing adjuster
• Holds sprockets and rotors with holes
FUEL & AIR center to center at a minimum distance
of 13mm and a maximum distance of
230mm
• Features 5 and 9mm pins
ELECTRICAL
• Adjustable stop-screw keeps tool open
at set distance
15-8270 $38.95
CHEMICAL PERFORMANCE FILTERS

SECURITY
& COVERS K&N®
MAGNETO FLYWHEEL PULLERS
TRAILER & HONDA P/N Retail
STANDS CT70, 110, CR125R, 250R, 480R, XL/XR
75/80/100,100S,100R,170 15-0608 $31.95
(All) XL/X-250/350/500/600, FT250 15-0609 41.95
TOOLS VT500C/FT,VF750S,C,F,VF1100C 15-0609 41.95
KAWASAKI
KV75, KD/KX80, KDX80, 15-0608 $31.95
SHOP
SUPPLIES
KE/KH/KM100, KD/KE/KS125
SUZUKI
15-0608 31.95 K&L
50,70,90,100,120,125 (except RM125) 15-0608 $31.95 6-IN-1 CROSS TYPE FLYWHEEL PULLER
DISPLAY YAMAHA • This puller has a compact design with multiple applications
& PROMO • Most other similar tools have only 4 sizes
CDI Flywheel Models, Tri-Moto YT125 15-0608 $31.95
• The following sizes can be used:
M10 x 1.25R, M14 x 1.5R, M16 x 1.5R, M18 x 1.5R, M24 x
CROSS 1.0R, M27 x 1.0R
REFERENCE
29-2288 $33.99
1382

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

BikeMaster® BikeMaster® WINDSHIELDS


ECONOMY VACUUM TESTING DELUXE VACUUM TESTING
BRAKE BLEEDING KIT BRAKE BLEEDING KIT CRUISER &
TOURING
• Remove all sponginess from brake system for a safer street ride • Professional level heavy-duty pump
or faster lap times • Brass body and fittings, rebuildable, pump, spare seal,
• Find vacuum leaks without an assistant, true “1 Person Operation” heavy-duty steel handles with thick shock reducing vinyl SEATS &
• Comes complete with everything you need to bleed both brakes handles, takes the work out of vacuum pumping for brake LUGGAGE
and test vacuum circuits on today’s modern motorcycles bleeding or testing
• 2 kits in 1 • Gauge with readings to -1.0 Bar (-30 inHg) DECALS &
• Comes with vacuum gauge equipped pump, fluid collector, • Extra long hoses and a myriad of adapters make this the GRAPHICS
hoses (long and short), adapters for just about any situation, choice for the professional or for the serious home mechanic
spare vacuum pump seal and protective carrying case • Can be used for automotive and marine uses too, including
15-1612 $84.95 engine vacuum systems for emissions, automatic transmission, etc. CONTROL
• Comes in a heavy-duty protective carrying and storage case
15-1613 $109.95
SUSPENSION

DRIVE

MOTION PRO® BRAKE


HYDRAULIC
BRAKE BLEEDER GOODRIDGE
• Aids in the bleeding and servicing of ENGINE
hydraulic brakes SPEED BLEEDERS
• Makes bleeding brakes a 1-person job • The Speed Bleeder has a built-in check
• Allows fluid and air to escape while valve to allow brakes to be bled by one FUEL & AIR
BikeMaster® preventing air from re-entering the person
• Sold in pairs
BRAKE BLEEDER TOOL system
• Instructions and hose included BMW P/N Retail
• Accomplish brake bleeding on your own R Models - Before early 1996 Front/Rear ELECTRICAL
• Attach provided hose to brake nipple, 15-8143 $20.95
R Models - Late 1996 - Present Front
then to bleeder tool K Models - All years Front/Rear
• Then crack bleeder and pump the lever 10mm x 1.0 03-6081 $15.50 CHEMICAL
• Valve will stop air from getting back DUCATI
into the bleeder All models
15-1619 $15.95 10mm x 1.0 03-6081 $15.50 SECURITY
HONDA & COVERS
All models except CBR1000R (Front/Rear/Clutch)
8mm x 1.25 03-6080 $15.50 TRAILER &
Goldwing Front/Rear/Clutch 03-6162 15.50 STANDS
KAWASAKI
All models Front/Rear
MOTION PRO® D.I.Y. 7mm x 1.00 03-6079 $15.50 TOOLS
BRAKE & CLUTCH BLEEDER NORTON
All models
• Handle and body are made of high
strength Zytel (glass reinforced nylon) 3/8 - 24 03-6039 $15.50 SHOP
• 10ml of fluid per injection stroke SUZUKI SUPPLIES
All models Clutch
BRAKE BLEEDER CAPS • RFI technology
• Ergonomic design is compact and 8mm x 1.25 03-6080 $15.50
• Hi-temp black replacement caps All models Front/Rear
DISPLAY
comfortable to use & PROMO
• Keeps dirt out of bleeder • Affordable for the individual technician 7mm x 1.00 03-6079 15.50
• Protects bleeder ends from stones or enthusiast YAMAHA
• 5 pack • Includes adapters to fit most brake All models Front/Rear/Clutch CROSS
53-0722 $11.60 systems and brake fluid cans 8mm x 1.25 03-6080 $15.50 REFERENCE
• Compatible with all brake fluids
• Main body colors may vary 1383
15-8316 $123.95

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TIRE ACCESSORIES

EXHAUST

TIRES &
WHEELS
MOTION PRO®
SPORT BIKE BEAD POPPER MOTION PRO®
• Designed for breaking the bead on
street and offroad motorcycle tires
SUPERMOTO
WINDSHIELDS • Compact and lightweight (only 3.7 oz.), “BEAD BUDDY” TIRE BEAD BREAKER
stores easily in your emergency tool • For use on 3-1/2” to 5” wheel widths
• Heavy-duty iron alloy tool makes easy
pack or tool box • Used to push the tire bead down into work of breaking stubborn tire beads
CRUISER & • Can be used with the wheel on or off the drop center of the rim on supermoto • Fits most touring tires, up to 160 in size
TOURING the motorcycle wheels while using tire tools to change 15-0211 $45.95
• Will not scratch the wheel the tires
• Hooks over spoke and pushes bead
SEATS & • Easier and more convenient than press
down on opposite side of tire from tire
LUGGAGE or lever tools levers
• Made of durable high-impact plastic • No more fighting to keep the bead
DECALS & • Not for use on ATV tires down while installing your tires
GRAPHICS • Made in the USA 15-8365 $27.99
06-8439 $19.95

CONTROL

SUSPENSION
MOTION PRO®
STEEL WHEEL WEIGHTS
DRIVE • Adhesive holds weight securely on
15-1592 spoked or cast wheels
MOTION PRO® • Powder-coated protective finish will
not rust
BRAKE “BEAD BUDDY II” • 1/4 oz. (7 g) segments
• New and improved design of the • 18 oz. card contains 6 strips with 12
original Bead Buddy segments per strip (72 total segments)
ENGINE • Durable 6061 aluminum construction • 90 oz. box contains 30 strips with 12
15-1593 with blue segments per strip (360 total segments)
BikeMaster® • A must for installing Bib Mousse tubes • Ideal size for motorcycle use
• Environmentally safe
• Used to push the tire bead down into the
FUEL & AIR WHEEL WEIGHTS drop center of the rim on offroad wheels Description P/N Retail
• Accurate and durable with super Silver 18 oz. 15-8454 $10.95
while using tire tools to change tires
strength adhesive for a secure and long Silver 90 oz. 15-8452 37.95
lasting balance job • Hooks over spoke and pushes bead
ELECTRICAL Black 18 oz. 15-8455 10.95
Description P/N Retail down on opposite side of the tire from
tire irons Black 90 oz. 15-8453 37.95
2.5g /60-pieces 15-1592 $6.95
• No more fighting to keep bead down
CHEMICAL 5g /60-pieces 15-1593 7.95
while installing offroad tires
• Patent pending
SECURITY
15-8471 $14.95
& COVERS

TRAILER &
STANDS

TOOLS
O.E.M. STYLE
BARNETT WHEEL WHEEL BALANCE WEIGHTS
SHOP
SUPPLIES
BALANCING WEIGHTS MOTION PRO® Description Color P/N
Adhesive Tape Style
Retail
• Crimp on ADHESIVE WHEEL WEIGHTS • Lead alloy weights are marked in
• Factory style weights with .270” • 6, 3 oz. strips pre-cut in 1/4 oz.
DISPLAY 1/4 oz. increments.
diameter nipple hole (7 gram) increments of 1/2” width
& PROMO Six 3 oz. Strips Silver 41-0434 $27.95
• Polished and chrome-plated • Ideal for racing or offroad use Six 3 oz. Strips Black 41-0462 27.95
Description P/N Retail • Special adhesive holds weight securely Six 3 oz. Strips Chrome 41-0463 45.95
CROSS 1/4 oz. (10) 49-8014 $25.30 to the rim Adhesive Shop Pack
REFERENCE 1/2 oz. (10) 49-8000 25.30 Description P/N Retail Pack of 360 Silver 15-0040 126.99
3/4 oz. (10) 49-8001 25.30 Card of 6 strips 15-0455 $13.95 Pack of 360 Black 15-0041 126.99
1384 1 oz. (10) 49-8002 25.30 Box of 30 strips 15-0456 62.95 Pack of 360 Chrome 15-0042 210.99

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
WHEEL WEIGHTS

EXHAUST

TIRES &
29-3027 29-3029 29-3033 29-3037 WHEELS

K&L UNIVERSAL ANGLED SPOKE P/N Retail


SPORT BIKE
10 grams 29-3022 $17.49
WHEEL WEIGHTS 20 grams 29-3023 18.69
• Sold in packs of 10 30 grams 29-3024 20.79
29-3040 WINDSHIELDS
HARLEY-DAVIDSON® O.E.M. Reference Weight Material P/N Retail
Harley-Davidson® Spoke 1/4 oz. Lead 29-3060 $9.99
Harley-Davidson® Spoke 1/2 oz. Lead 29-3061 9.99 CRUISER &
Harley-Davidson® Spoke 3/4 oz. Lead 29-3062 10.99 TOURING
Harley-Davidson® Spoke 1 oz. Lead 29-3063 11.99
Harley-Davidson® Spoke 1-1/2 oz. Lead 29-3064 9.99 SEATS &
Harley-Davidson® Spoke 1/4 oz. Chrome Steel 29-3065 12.99 29-3043 LUGGAGE
Harley-Davidson® Spoke 1/2 oz. Chrome Steel 29-3066 13.99
Harley-Davidson® Spoke 3/4 oz. Chrome Steel 29-3067 15.99
Harley-Davidson® Spoke 1 oz. Chrome Steel 29-3068 17.99 DECALS &
GRAPHICS
HONDA
Honda Spoke CB750K 44609-283-000 5 Grams Lead 29-3034 $26.99
Honda Spoke CB750K 44608-283-000 10 Grams Lead 29-3035 26.99 CONTROL
Honda Spoke CB750K 44607-283-000 15 Grams Lead 29-3036 26.99 29-3046
Honda Spoke CB750K 44606-283-000 20 Grams Lead 29-3037 26.99
Honda Comstar Wheel 42704-410-000 10 Grams Lead 29-3028 84.99 SUSPENSION
Honda Comstar Wheel 42705-410-000 20 Grams Lead 29-3029 83.99
Honda Comstar Wheel 42706-410-000 30 Grams Lead 29-3030 83.99
Honda Hurricane 600F (87-90) 42704-KT7-000 10 Grams Lead 29-3025 64.99
Honda Hurricane 600F (87-90) 42705-KT7-000 20 Grams Lead 29-3026 59.99 DRIVE
Honda Hurricane 600F (87-90) 42706-KT7-000 30 Grams Lead 29-3027 60.99
Honda Mag/Hurricane 1000 42704-MBO-000 10 Grams Lead 29-3031 52.99 29-3047
Honda Mag/Hurricane 1000 42705-MBO-000 20 Grams Lead 29-3032 52.99 BRAKE
Honda Mag/Hurricane 1000 42706-MBO-000 30 Grams Lead 29-3033 52.99

KAWASAKI
ENGINE
Kawasaki Mag/Ninja ZX7 41075-1014 10 Grams Lead 29-3038 $23.99
Kawasaki Mag/Ninja ZX7 41075-1015 20 Grams Lead 29-3039 23.99
Kawasaki Mag/Ninja ZX7 41075-1016 30 Grams Lead 29-3040 23.99
Kawasaki Mag VN1600B1 41075-0004 10 Grams Steel 29-3049 20.99 29-3049 FUEL & AIR
Kawasaki Mag VN1600B1 41075-0005 20 Grams Steel 29-3050 20.99
Kawasaki Mag VN1600B1 41075-0006 30 Grams Steel 29-3051 21.99
Kawasaki Mag ZX1000C1 41075-0007 10 Grams Steel 29-3054 20.99 ELECTRICAL
Kawasaki Mag ZX1000C1 41075-0008 20 Grams Steel 29-3055 20.99
Kawasaki Mag ZX1000C1 41075-0009 30 Grams Steel 29-3056 21.99
Kawasaki Mag VN1600D1 41075-0014 10 Grams Steel 29-3057 30.99
Kawasaki Mag VN1600D1 41075-0015 20 Grams Steel 29-3058 30.99 CHEMICAL
Kawasaki Mag VN1600D1 41075-0016 30 Grams Steel 29-3059 30.99 29-3052
SUZUKI SECURITY
Yamaha/Suzuki Mag 55410-47001 10 Grams Lead 29-3044 $17.99 & COVERS
Yamaha/Suzuki Mag 55411-47001 20 Grams Lead 29-3045 17.99
Yamaha/Suzuki Mag 55412-47001 30 Grams Lead 29-3046 17.99 TRAILER &
Suzuki Mag/GSXR 750 55411-00A00 10 Grams Lead 29-3047 7.99 STANDS
Suzuki Mag/GSXR 750 55412-45100 20 Grams Lead 29-3048 8.99 29-3054
Suzuki Mag GSXR1000 43222-73H10 10 Grams Steel 29-3049 20.99
Suzuki Mag GSXR1000 43224-73H10 20 Grams Steel 29-3050 20.99 TOOLS
Suzuki Mag GSXR1000 43226-73H10 30 Grams Steel 29-3051 21.99
Suzuki Spoke VL800 55412-38A00 20 Grams Lead 29-3052 22.99
Suzuki Spoke VL800 55413-38A00 30 Grams Lead 29-3053 24.99 SHOP
SUPPLIES
YAMAHA
Yamaha Mag 2MO-25399-10 10 Grams Lead 29-3041 $18.99 29-3057
Yamaha Mag 2MO-25399-20 20 Grams Lead 29-3042 17.99 DISPLAY
Yamaha Mag 2MO-25399-30 30 Grams Lead 29-3043 17.99 & PROMO
Yamaha/Suzuki Mag 55410-47001 10 Grams Lead 29-3044 17.99
Yamaha/Suzuki Mag 55411-47001 20 Grams Lead 29-3045 17.99 CROSS
Yamaha/Suzuki Mag 55412-47001 30 Grams Lead 29-3046 17.99 REFERENCE
Yamaha Mag FJR1300 5MT-25398-00-00 10 Grams Steel 29-3054 20.99
Yamaha Mag FJR1300 5MT-25398-10-00 20 Grams Steel 29-3055 20.99
Yamaha Mag FJR1300 5MT-25398-20-00 30 Grams Steel 29-3056 21.99 29-3060 1385

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TIRE & WHEEL TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

WINDSHIELDS
K&L
CRUISER & SPOKE WHEEL WEIGHT HAMMER
TOURING • Special hammer for reaching behind the disc rotor when
installing or removing spoke type wheel weights
SEATS & • Patent pending
K&L
LUGGAGE 29-2295 $12.99 SPOKE WHEEL WEIGHT REMOVER TOOL
• Designed to allow the tech to place the split tang of the tool
DECALS & between the rim and the weight and tap it off the nipple with
GRAPHICS the Wheel Weight Hammer
• Patent pending
29-2296 $15.99
CONTROL

SUSPENSION

DRIVE
K&L
BRAKE TIRE TAMER
• Holds the bead away from rim for easy valve stem, rim lock
and tube installation
• Patent pending
ENGINE
29-2294 $21.99

FUEL & AIR BikeMaster® K&L


2-PIECE TIRE MOUNTING WHEEL WEIGHT SCRAPER
• Easily removes most stick-on type wheel weights
ELECTRICAL
WHEEL RIM PROTECTOR • Sold in pack of 3
• If you own tire irons, then you should
29-2293 $1.99
own a set of these inexpensive protectors
• Slip them between the wheel and tire to
CHEMICAL avoid expensive and ugly damage to
your wheels
15-1591 $7.95
SECURITY
& COVERS
K&L
TRAILER &
STANDS NYLON RIM PROTECTORS
• Designed to protect alloy rims from getting scratched by tire
levers or tools while changing tires
TOOLS • Sold as a pair
NOTE: Must be trimmed for ATV use.
29-2312 $7.99
SHOP
SUPPLIES

DISPLAY
& PROMO
MOTION PRO®
RIM PROTECTORS
• Protects your wheel from scratches and
CROSS
REFERENCE
HELIX® RACING dings caused by tire changing tools
FOOT PUMP • Retrieval cords are included for
• Compact pump folds up to save space easy use
1386 15-8357 $10.95
53-0670 $10.25

STREET • TUCKER ROCKY DISTRIBUTING


TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TIRE TOOLS

EXHAUST

TIRES &
WHEELS

BikeMaster® 8 INCH TIRE SPORT BIKE


IRONS 2 PACK
• Everyone knows just one tire iron won’t BikeMaster® BikeMaster® STEEL
do it WINDSHIELDS
• 2 tire iron pack with equal length 3 PIECE TIRE IRON SET TIRE IRON WITH HANDLE
• Forged steel for light weight and super • Designed to be a superior product • Specially designed for every day use
strength • I-beam cross section for strength and with comfortable handle CRUISER &
• Not bent sheet metal like other brands bend resistance • Handle has high grip surface for TOURING
• Ergonomic design, rounded corners no • Forged chrome vanadium steel (no confident leverage
sharp edges stamped sheet metal) • Super smooth chrome end eases beads
• Designed not to pinch tubes • Shot peened surface for strength relief on and off SEATS &
• 8” length is perfect balance of • Nickel plated for corrosion resistance • Smooth rounded edges avoids rim LUGGAGE
portability (tool kit) vs. leverage • Rounded edges to avoid tube pinching, marring and tube pinching
• Sold in pairs tire damage • Tempered steel resists deformation DECALS &
15-1551 $12.95 • 3 lengths for the perfect fit for the • Cold formed end for strength GRAPHICS
application • 12” overall length
• Ergonomically rounded edges, 15-1549 $15.95
designed to avoid injury CONTROL
• Set includes 9-1/2”, 11” and 15”
tire irons
15-1552 $26.95
SUSPENSION

BikeMaster®
HEAVY-DUTY TIRE IRON 15-1544
DRIVE
• Specially designed for heavy-duty use
• CNC tuned billet aluminum
• Ergonomic handle designed especially
for slippery hands BRAKE
• Long shaft length gives you more
leverage on stubborn tires
• Plated shaft protects from corrosion ENGINE
• Rounded forged spoon end for high
strength and avoids pinching 15-1543
• Wide splayed spoon for confident grip
without bead damage FUEL & AIR
15-1550 $25.95
BikeMaster® BikeMaster®
STEEL TIRE IRON TIRE IRON SPOON ELECTRICAL
• Made of heat treated vanadium steel • Made of heat treated vanadium steel
Description P/N Retail • Overall length 10-1/4”
11” long 15-1543 $13.95 15-1542 $13.95 CHEMICAL
15-3/4” long 15-1544 15.95

SECURITY
& COVERS

TRAILER &
BikeMaster® STANDS
SPOKE WRENCH SET
(10 PIECE) BikeMaster® TOOLS
• Make sure your wheels are strong
and true BikeMaster® VALVE STEM
• Super accurate wrench ends make SHOP
spoke adjustment a snap TIRE VALVE PULLER MOUNTING TOOL SUPPLIES
• Simply thread the puller through the • The only way to go if you want a secure
• Made from chrome vanadium tool steel undamaged valve stem
for long life valve hole in the rim, screw the cap
• Allows a straight pull on the stem DISPLAY
• Chrome plated for corrosion resistance onto the valve stem of the inner tube,
• Force is evenly distributed on the stem so & PROMO
• Size range covers from mini bikes to full seat the tube inside the tire and once
the second tire bead is in place, simply it seats correctly and seals the first time
bore race bikes • Durable non-marring plastic coating on
• Includes heads: 5.2, 5.4, 5.6, 5.8, 6.0, pull the valve stem into place CROSS
shaft REFERENCE
6.2, 6.4, 6.6, 6.8 • Easy to use, you will wonder how you
• Made from forged chrome vanadium
• Comes with carrying case survived without it for a lifetime of service
15-1589 $59.95 15-1618 $9.95 15-1569 $17.95
1387

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TIRE TOOLS

EXHAUST
34-0289

TIRES & MSR®


WHEELS ULTIMATE MIGHTY MOTION PRO®
34-0490 TIRE IRON ASSORTED TIRE IRONS
SPORT BIKE • The wide “spoon” area is carefully
• Skin-packed kit includes one 8.5”, 11”
radiused to ensure smoothness and
MSR® TYRE IRON prevent accidental tube nicks
and 16” tire iron
• Form fitting handle for a secure grip 15-8049 $33.95
• 17.5” overall
WINDSHIELDS • Wide spoon area, carefully curved to 33-0001 $29.95
ensure smooth action and help prevent
pinched tubes
CRUISER & • 11” overall
TOURING
Description P/N Retail
Standard 34-0289 $16.95 MOTION PRO®
SEATS &
LUGGAGE
Fanny Pack Size 34-0490 16.95 EXTRA LONG STEEL
TIRE IRON
DECALS &
• Maximum leverage MOTION PRO®
• Measures 16” x 1”x 1-3/4”
GRAPHICS
• Both ends are curved ENDURO TIRE IRONS
• Sold individually • Tire irons designed for the professional
CONTROL 15-0450 $16.95 Six Day Enduro rider
MOTION PRO® • Perfect for tool kit on any offroad bike
SPOON TYPE TIRE IRON • Sold in pairs
• Curved end to fit hand better 15-0451 $21.95
SUSPENSION
• Hard nickel pewter finish
• 10” long and weighs 4.2 oz. each
Description P/N Retail
DRIVE Single 15-8115 $15.95
MOTION PRO®
Set of Two 15-8409 32.95 LONG STEEL TIRE IRONS
• Long zinc-plated tire irons give more
BRAKE leverage
• Measures 11-1/2” x 3/4” x 1/4”, with
1 curved and 1 straight end
ENGINE • Sold in pairs
MOTION PRO® 15-0473 $14.95
STANDARD LONG STEEL 15-8326 PARK TOOL
FUEL & AIR TIRE IRONS WHEEL TRUING STAND
• Zinc plated 8-1/2” x 3/4” x 1/4” with
1 curved end and 1 straight end • Constructed from heavy-gauge steel
ELECTRICAL • Designed to reduce marring of alloy • Allows for extremely accurate and
reliable wheel truing at an economical
rims price
• Sold as card of 10, priced individually • For wheels up to 7” wide and 29” in
CHEMICAL 15-8004 $59.95 15-8284
diameter
15-1251 $116.95
SECURITY MOTION PRO®
& COVERS T6 TIRE LEVERS
• Under 10” in length and weighs 3.5 oz.
TRAILER & • Hex ends are rated for a max torque
STANDS of 90 ft. lbs.
MOTION PRO® • Lightweight forged 7075 T-6 aluminum
T-6 COMBO LEVER construction
TOOLS • Allows your T-6 Combo Lever to be • Hard anodized finish
used as your primary 3/8” driver, • Tire spoon on one end and axle nut hex
32mm wrench on the other
SHOP • 3/8” male drive with 1/4” female drive • Perfect size for any fanny pack
SUPPLIES • For use with sockets for smaller front axles
• Lightweight billet 7075 T-6 aluminum Description P/N Retail
T6 Tire Iron Combo Wrench
DISPLAY
with chrome vanadium steel insert
• Features lightening holes 12/13mm 15-8284 $29.95 STRIDE TOOLS
& PROMO • Coin knurled to facilitate turning sockets 22mm 15-8286 29.95 TIRE VALVE TOOL
by hand 24mm 15-8287 29.95 • Replaces bothersome leaky or broken
CROSS • Blue anodized finish 27mm 15-8288 29.95 valve stems on ATVs and motorcycles
REFERENCE 15-8370 $18.95 32mm 15-8289 29.95 • Allows the user to replace the valve
Drive Adapters Drive Adapters stem without breaking down the tire
1388 24mm 3/8” drive 15-8326 $16.99 24mm 3/8” drive 15-8326 $16.99 from the wheel, a great time saver
27mm 3/8” drive 15-8327 16.99 27mm 3/8” drive 15-8327 16.99 15-1305 $34.99
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TIRE & WHEEL TOOLS

EXHAUST

K&L MSR® SPOKE WRENCH TIRES &


TIRE VALVE STEM
• Drop forged corrosion resistant steel
• Precision sized for all common O.E.M.
EXCEL WHEELS

INSERTER spoke nipples SPOKE TORQUE WRENCH


Description P/N Retail • Accurately build and maintain your
• Simplifies the installation of valve stems SPORT BIKE
5.1 x 5.7 34-2113 $18.95 wheels
in tubeless tires • Allows you to increase or decrease
29-2298 $16.99 6.0 x 6.3 34-2114 18.95
6.4 x 6.7 34-2115 18.95 torque on spokes
• Lightweight chrome, aluminum body, WINDSHIELDS
6.9/Spline Drive 34-2116 18.95
7mm KTM 34-2117 18.95 calibrated to + or - 2% accuracy
• 6pc. set includes chrome aluminum
bodied wrench, 1 chrome plated Pro CRUISER &
Series 6pt. spline drive head, and 4 TOURING
KASTAR™ VALVE STEM popular Japanese and other O.E.
conventional type head sizes: 6.1, 6.3, SEATS &
FISHING TOOL 6.5 and 6.7mm LUGGAGE
• Easily pulls the valve stem into place • All heads are made from S45C hi-
without fingers getting in the way of the carbon steel, heat treated to an HRC 40-
DECALS &
valve stem hole and pull through process EXCEL NIPPLE WRENCH 45 hardness
GRAPHICS
• The 3 functions of this tool make valve • Spline drive • Comes in a handy composite RK Excel
stem and inner tube jobs faster and 11-4829 $7.50 logo box (Blue)
easier • Wrench has adjustability ranges from
• Kastar’s valve stem puller threads into CONTROL
5-60Lbs. inch
the valve stem rather than over the valve • N.m and Kg.m cross reference chart
stem included
• Makes the work on laced or spoked 11-4826 $139.95 SUSPENSION
wheels easier since you do not have
enough clearance to allow over-the- MOTION PRO®
valve stem threaded types to pull
through
SPOKE WRENCH DRIVE
$11.60 • Chrome vanadium tool steel with a
15-1219
hard nickel-pewter finish
• Square end openings which grip the BRAKE
spoke nipple on all 4 sides
• Offset slotted ends make it easy and
quick to use
15-8296 $14.95 ENGINE

ROWE U.S.A™ FUEL & AIR


SPOKE WRENCH CAMEL ON-THE-WHEEL
• Steel
• Fits 6 common spoke nipple sizes TUBELESS TIRE KIT ELECTRICAL
• Made in U.S.A. • Includes 6 repair strips, cement and
15-1351 $8.95 insert tool
MOTION PRO® • For mounted tire repair
CHEMICAL
VALVE CORE REMOVER • Temporary repairs only
• Made from hex stock 15-0169 $7.95
• Allows for easy removal and installation SECURITY
of standard valve cores in tubed or & COVERS
tubeless valve stems
15-8183 $2.95
BikeMaster® TRAILER &
STANDS
SPOKE WRENCH
• Made of steel
• Fits 6 different sizes TOOLS
15-1521 $7.95
MOTION PRO® SHOP
SPOKE WRENCH SUPPLIES
• Designed for the professional wheel
builder
• Featuring unique square end openings DISPLAY
to grip the spoke nipple on all 4 sides
CAMEL ROUND & PROMO
during tightening TIRE PATCH KIT
BikeMaster® • Made from chrome vanadium tool steel Repair kit includes: CROSS
TIRE VALVE REPAIR TOOL with a satin chrome finish for long life • 4 small patches REFERENCE
• Cleans internal and external valve stem Description P/N Retail • 2 large patches
threads and remove valve cores 6mm and 6.3mm 15-8133 $14.95 • Cement and buffer 1389
15-1540 $5.95 6.5mm and 6.8mm 15-8157 14.95 15-0168 $4.95

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TIRE REPAIR KITS

EXHAUST

TIRES &
WHEELS

SPORT BIKE
BikeMaster® BikeMaster®
TIRE AND TUBE TIRE AND TUBE PATCH AND BikeMaster®
WINDSHIELDS FLAT REPAIR KIT PLUG REPLACEMENT KIT TIRE REPAIR KIT
• Covers tubes and tubeless repair • Complete kit with all the patches and • Latest design of insertion gun, with more
• Comes complete with patches, plugs, plugs that come in the BikeMaster® Tire leverage than old piston grip designs
CRUISER &
plug insertion tool, hole cleaner, glue, and Tube Flat Repair Kit
TOURING • Complete kit means you are ready to fix
pressure wheel with surface preparation • Perfect for restocking your repair kit
tool and knife for plug trimming after use or keep extra supplies around a flat on the road or at home
SEATS & • Includes 4 CO2 Compressed air the shop • Comes with insertion tool, plugs, awl,
LUGGAGE cylinders and an air valve which can 15-1508 $3.95 rubber cement and trimming
connect directly to the tire valve, or use • Everything you need to make sure you
the flexible air line, also included for make it to safety
DECALS &
GRAPHICS hard to reach valves • Durable carrying case included
15-1507 $44.95 15-1637 $35.95

CONTROL

SUSPENSION

DRIVE

BRAKE

TUBELESS TIRE PLUGGER TUBELESS TIRE PLUGGER TECH TUBELESS TIRE SHOP
ENGINE • Seals from inside/out WITH CO2 REPAIR KIT
• Repair punctures without dismounting • Seals from inside/out • Kit contains Uni-Seal repairs for 1/8”
tire from wheel • Repair punctures without dismounting and 1/4” max. holes
FUEL & AIR • Compact size (3 1/2” x 7 1/2” x 1”) tire from wheel • Uni-Seal cutters
• Comes in zipper pouch weighing only • Complete with CO2 to re-inflate tire • Rubber cleaner
12oz. • Compact size (8” x 5” x 1”) • Cement and spiral cement tool
Description P/N Retail • Comes in zipper pouch weighing only • Inner liner scraper and stitcher-buffer
ELECTRICAL
Plugger 15-0213 $32.95 22oz. • Handy carrying case included
Replacement Plugs 15-0209 14.95 Description P/N Retail Description P/N Retail
Plugger 15-0215 $48.95 Complete Kit 15-0239 $236.74
CHEMICAL
Replacement Plugs 15-0209 14.95 Uni-Seal 1/8” stem Box of 14 15-0246 37.95
Uni-Seal 1/4” stem Box of 14 15-0229 49.95
SECURITY Chemical cement 8 oz. can 15-0244 12.60
& COVERS Rubber Cleaner 16 oz. can 15-0245 17.86
Plug insertion tool 15-0234 10.65
TRAILER &
STANDS

TOOLS

TUBELESS TIRE SHOP


SHOP
SUPPLIES
REPAIR KIT DELUXE TIRE REPAIR
• Professional quality tubeless tire repair kit
• Allows permanent repair of puncture
TRAVEL KIT
• High quality tire repair kit
DISPLAY
& PROMO
damage while tire remains on rim • Provides everything necessary for THREEBOND
• In some cases removal of wheel from
vehicle may not even be required
“on the road” repair SEAL “N” AIR
of both tube and tubeless type tires • Temporary repair of flat tires
CROSS Application P/N Retail • Includes a unique engine driven air
REFERENCE • 6 oz. bottle
Tubeless Tires 15-0207 $44.95 pump for inflating tires • Sold as case of 24, priced
Replacement Plugs 15-0205 $45.95 individually
1390 For Use With #15-0207,
53-0407 $9.65
#15-0213 & #15-0215 15-0209 $14.95
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
TIRE REPAIR KITS

07-0609 EXHAUST

MICROFLATE TIRES &


• Lightweight mini CO2 inflater WHEELS
• Flow control valve
• Valve connection: push on fits presta,
screw on fits schrader SPORT BIKE
Description P/N Retail
Microflate 07-0652 $15.99
25g Threaded 07-0626 10.99 WINDSHIELDS
16g Threaded 6 pk 07-0643 21.99
16g Threaded 20 pk 07-0642 71.49
07-0613 TIRE REPAIR AND CRUISER &
INFLATION KIT STREET TOURING
• Featuring Monster Air Chuck and two
45g threaded CO2 cartridges
SEATS &
• Kit comes complete with a selection of
LUGGAGE
tire plugs, tube patches, glue, tire
reamer and plug installation tool GENUINE INNOVATIONS
• Packed in a convenient zippered nylon bag DECALS &
Description P/N Retail MONSTER AIR CHUCK KIT GRAPHICS
Premium Kit 07-0620 $61.99 • Fast and fully controllable mini inflator
Replacement Plugs (10 pk) 07-0633 5.95 • Push to inflate technology
Replacement Patches (10 pk) 07-0651 2.99 • All brass and aluminum construction CONTROL
• Includes two 45 gram CO2 cartridges
07-0658 $35.95
07-0654 45g 5/8” Threaded 2 pk SUSPENSION
07-0648 $29.99
SECOND WIND MTB
07-0622 • Compact hybrid CO2 hand pump
• Allows you to inflate using CO2 DRIVE
or hand pump feature simultaneously
without removing CO2 cartridge
• IH-intelligent head automatically BRAKE
detects and locks onto either presta
and schrader valves with no threads or
C02 PUSH ON
adapters AIR CHUCK SL 07-0653
ENGINE
Description P/N Retail • Top of the line mini CO2 inflator made
PROGRESSIVE® SUSPENSION Pump 07-0654 $31.99 of nickel plated alloy
EMERGENCY TIRE REPAIR 16g Non-Threaded 6 pk 07-0646 15.99 • Less than half the weight of previous
air chucks FUEL & AIR
KITS 16g Non-Threaded 20 pc. Tub 07-0647 45.99
• Push on presta or schrader valves
Application P/N Retail 16g Threaded 6 pk 07-0643 21.99
Description P/N Retail
Tube Type Kit 16g Threaded 20 pc. Tub 07-0642 71.49 Air Chuck SL 07-0653 $18.99 ELECTRICAL
• Includes patches, glue, CO2 cartridges 25g Cartridge Threaded 07-0626 10.99 16g Threaded 6 pk 07-0643 21.99
and a flex line adapter 16g Threaded 20 pc Tub 07-0642 71.49
Tube Type Tires 07-0613 $30.95 25g Threaded 07-0626 10.99 CHEMICAL
Tubeless Type Kit
• Includes CO2 cartridges, a flex line MOTOPUMP
adapter, glue and plugs 34-0341
Tubeless Type Tires 07-0609 $35.95 ULTRAFLATE SECURITY
& COVERS
Tube/Tubeless Type Kit TIRE INFLATOR
• Includes the Moto-Pump-Ultra, plugs and • Controllable tire inflation
• Uses any size, threaded CO2 TRAILER &
patches for both tube and tubeless type tires STANDS
• Accepts both threaded and non-threaded cartridges and the inexpensive
CO2 cartridges BB gun type non-threaded CO2 cartridges
Tube/Tubeless Type Tires 07-0622 $51.95 • New dual-purpose nozzle pushes on for TOOLS
Replacement Plugs with Cement presta valves and screws on for
• Sold in packs of 3 shrader valves 34-1020
07-0623 $7.95 Description P/N Retail SHOP
Pump w/16g Cartridge 07-0616 $16.99
Replacement Cartridges
Ultraflate Plus Pump MSR® SUPPLIES
• Sold in packs of 2 w/16g Non-Threaded Cartridge - Accepts TIRE INFLATION KIT
For #07-0613 and 07-0614 $10.95 all CO2 cartridges 07-0649 21.49 • Compact carrying pouch fits in fanny pack DISPLAY
#07-0609 Tire Repair Kit 12g Non-Threaded 3 pk 07-0612 6.99 • Comes with 3 CO2 cartridges and a & PROMO
CO2 Adapter Hose 07-0615 $8.29 25g Cartridge Threaded 07-0626 10.99 right-angle inflator
12g Non-Threaded 50 pc Tub 07-0641 85.99 Description P/N Retail CROSS
16g Threaded 20 pc Tub 07-0642 71.49 Inflation Kit 34-0341 $22.95 REFERENCE
16g Thread 6 pk 07-0643 21.99 Repl. CO2 Bottles 5 pk. 34-1020 15.95
16g Non-Threaded 6 pk 07-0646 15.99 Repl. Right Angle Inflator 1391
16g Non-Threaded 20 pc tub 07-0647 45.99 with 16g CO2 07-0652 15.99

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TIRE GAUGES

EXHAUST

TIRES &
WHEELS BikeMaster®
DIAL GAUGE
• Swivel angle chuck with
SPORT BIKE MOTION PRO® air release valve
PROFESSIONAL TIRE GAUGE Description P/N
0-15 psi in 1/4 lb. Increments 15-1505
Retail
$14.95
BikeMaster®
• 2.5 liquid filled gauge with multicolored DIAL GAUGE WITH HOSES
WINDSHIELDS face (psi & Kpa) and heavy duty 0-60 psi in 1 lb. Increments 15-1506 12.95
• Swivel angle chuck with air release valve
protective gauge boot
• Braided hose and extension bar angle
• 6061 aluminum trapezoidal body with
CRUISER & integrated push button bleeder valve for chuck
TOURING easy air pressure adjustments Description P/N Retail
• 18” premium hose with dual swivels and 0-15 psi in 1/4 lb. Increments 15-1503 $23.95
SEATS & brass push-on ball chuck BikeMaster® 0-60 psi in 1 lb. Increments 15-1504 21.95
LUGGAGE • 2.5” 0-60psi recommended for street
15-8402 $94.95
DIGITAL TIRE GAUGE
• Range from 0-100 psi
DECALS & • One button operation
GRAPHICS • Easy to read
• Digital accuracy
• Automatic shut-off after 15 seconds
CONTROL • Includes battery
15-1502 $17.95
AUTOMETER® TIRE GAUGE
SUSPENSION • 0-60 psi with peak hold
42-1034 $33.95
CruzTOOLS®
DRIVE
DIGITAL GAUGE
MOTION PRO® • Reads in 0.1 psi
DIGITAL TIRE PRESSURE 15-4017 $17.95 ACCUGAGE
BRAKE
GAUGE 0-60psi RUBBER “SHOCK
• Best professional tire pressure gauge ABSORBER” COVER
you will find anywhere • Protects Accugage head from damage
ENGINE • Precise digital readout to 1/100th psi STANDARD • Fits all Accugages
• Accurate to +/- 0.5% of maximum
gauge reading
ACCUGAGE 15-0256 $2.99
• Precision tire gauge with swivel chuck
FUEL & AIR • Programmable display allows choice of
Description P/N Retail
continuous pressure reading or retains
maximum pressure reading until reset 3-60 psi in 1 lb. incr. 15-0252 $11.99
• Mininum and maximum pressure 1-15 psi in 1/4 lb. incr. 15-0253 14.99
ELECTRICAL retained in memory TRU-FLATE
• 60 psi max LOW PRESSURE
• Programmable scales TIRE GAUGE
CHEMICAL (psi/bar/kpa/kg-cm2)
• Billet aluminum body • Calibrated to 20 lbs. in 1/2 lb. units
• High flow push button bleeder valve for • Originally known as Camel Tire
SECURITY quick pressure adjustment ACCUGAGE 15-1406 $9.95
& COVERS • 18” long high pressure hose with dual WITH HOSE
swivels and brass ball type air chuck • Accurate stop hand pressure reading
• Large easy to read display with back • Push-button valve bleeds off excess
TRAILER & light for low light conditions
STANDS pressure
• Rubber anti-shock protective boot
• Battery powered (1000 hrs continuous
• Flexible 14” hose KASTAR PEN TYPE
use) with battery strength indicator • Brass right angle chuck TIRE PRESSURE GAUGE
TOOLS • “Auto Off” to extend battery life Description P/N Retail • Solid brass construction
• Battery included 3-60 psi in 1lb. incr. 15-0255 $21.99 • Easy-to-read, 4-sided nylon bar
15-8468 $259.95 1-15 psi in 1/4 lb. incr. 15-0254 24.99 • Calibrated 0-20 lbs. in 1/2 lb. units
SHOP
SUPPLIES 15-1201 $6.99

DISPLAY BikeMaster®
& PROMO SX SERIES PEN-TYPE TIRE GAUGE
ACCUGAGE • Graduated 0-20 psi in 1/2 lb. increments
CAMEL
CROSS • Stop hand/bleeder valve assembly • Chrome-painted brass body TIRE GAUGE 10-75PSI
REFERENCE • Swivel angle chuck • Chrome plated barrel with nylon indicator
• Easy to read
• Ideal for ATV tires and forks • Sold as 3 pack, retail priced • 10-75psi
1392 • 1-15 psi in 1/4 lb. incr. individually • Metric pocket gauge
15-0251 $18.99 15-1501 $6.95 ea. 15-1408 $9.95
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
AXLE & CHAIN TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE
MOTION PRO® MOTION PRO®
T-6 HEX AXLE TOOL HEX AXLE TOOL
• Fits internal hex on many late model sportbike axles • Recommended for shop or home use at 6 oz. WINDSHIELDS
• 4 metric hex sizes: 17, 19, 22 and 24mm • Heavy-duty heat treated 4130 chrome moly construction
• 3/8” square drive on both ends • 3/8” square drives on both ends are rated for a maximum of
• 7075 T-6 aluminum construction 150 ft. lbs. CRUISER &
• 3/8” square drive is rated for a maximum torque of 90 ft-lbs • Fits internal hex on many late model sportbike and some TOURING
• Fits Buell (XB9R, XB9S,XB12R, XB12S 03-04), Honda offroad applications
(CBR600RR, CBR1000RR), Kawasaki (ZX6R, ZX6RR, • 4 metric hex sizes: 17, 19, 22 and 24mm SEATS &
ZX600E/K, ZX7R, ZX9R, Z1000), Suzuki (GSXR 00-04, All V- • Fits Buell (XB9R, XB9S,XB12R, XB12S 03-04), Honda LUGGAGE
Storm, SV1000; GSXR1300R 99-07) and Yamaha (R1, R6) (CBR600RR, CBR1000RR), Kawasaki (ZX6R, ZX6RR,
15-8355 $39.95 ZX600E/K, ZX7R, ZX9R, Z1000), Suzuki (GSXR 00-04, All V- DECALS &
Storm, SV1000; GSXR1300R 99-07) and Yamaha (R1, R6) GRAPHICS
15-8397 $32.95

CONTROL

SUSPENSION

MOTION PRO® MOTION PRO®


DRIVE
QUAD STAKE MASTERLINK PLIERS
CHAIN RIVET KIT • Simplify installation and removal of
clip-type masterlinks
• Use in conjunction with Jumbo Chain BRAKE
• One tip is shorter and notched to be
Tool P/N 15-8135
placed on the pin while the other is
• Sold separately from P/N 15-8135 longer to easily push the clip
15-8142 $19.95 15-8230 $28.95 ENGINE

FUEL & AIR

ELECTRICAL

MOTION PRO® MOTION PRO® PRIMARY MOTION PRO® CHEMICAL


CHAIN CUTTING BOARD CHAIN ALIGNMENT TOOL CHAIN ALIGNMENT TOOL
• Size chains to length quickly, easily and • For primary chain alignment • Allows visual alignment of sprocket for
accurately • For aligning the teeth on the clutch shell accurate alignment of drive chain and SECURITY
with the teeth on the motor sprocket rear wheel & COVERS
• No more improperly cut chains due to
miscounted links • Quick and easy to use 15-0125 $27.95
• Easy to read link counting system • Eliminates the need for taking TRAILER &
• Works on 40 and 50 series chains multiple measurements STANDS
• For use with Evo-type engines
• Made in the U.S.A. 15-8367 $27.99
15-8271 $72.99
TOOLS

SHOP
SUPPLIES

DISPLAY
& PROMO

CROSS
REFERENCE

1393

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
CHAIN REPAIR TOOLS

EXHAUST

TIRES &
WHEELS

SPORT BIKE

WINDSHIELDS MOTION PRO® MOTION PRO®


MOTION PRO® T-6 CHAIN TOOL CHAIN RIVETING TOOL
JUMBO CHAIN TOOL KIT • For breaking 520-530 chain and • Designed to rivet chain links to form
CRUISER & • Designed to break roller chain up to 630 pressing on and off 520 and some an endless chain such as cam and
TOURING (Fits all standard and O-ring chain sizes 525 master-link side-plates drive chains
520, 525, 530 and 630) • Lightweight, 6 oz. including press plates • May also be used to push pins out for
and handle (8 oz. with pouch) breaking chains.
SEATS & • Designed to rivet chain up to 530 Description P/N Retail
LUGGAGE (not 630) • Handle detaches for easy storage
• To reduce weight further, an MP Tool, Chain riveting tool 15-0122 $101.95
• Masterlink sideplate press kit included to 2mm repl. pin 15-8059 6.95
press on sideplates on chains up to 530 8mm combination wrench or 8mm socket
DECALS & with extension can be used as a handle 3mm repl. pin 15-8060 6.95
(not 630) 4mm repl. pin 15-8061 6.95
GRAPHICS • Custom pouch with individual storage
• Screws and attachments are made from Repl. rivet tip 15-8062 6.95
86L20 steel and then heat-treated for locations including a pocket for extra Press Plates 15-0123 20.95
strength and durability chain/master links and a large Use with P/N 15-0122
CONTROL
• Extractor pin is firmly guided by a accessory pocket
removable guide, ensuring long pin life • This tool does not rivet master-link
• May be bolted to a work bench, 15-8358 $74.95
SUSPENSION supported in a vise or held by handle
• When bolted to a solid surface, air or
electric wrenches may be used to break
DRIVE chain
• Recommended for heavy-duty use
• Made in USA
15-8135 $146.95 15-0123
BRAKE REPLACEMENT PIN
15-8235 $10.95

ENGINE 15-8066 15-8403

FUEL & AIR MOTION PRO® MOTION PRO®


CHAIN BREAKER PRESS CHAIN PRESS TOOL
AND RIVETING TOOL • Used to press side plates on all
ELECTRICAL • Complete chain tool for most 520, 525, 520-530 chain
MOTION PRO® 530 standard and o-ring chains • Can be used on O-ring chains
• Designed to install press fit
CHAIN BREAKER • Break, press and rivet your chain with
one compact tool connecting links
CHEMICAL • Heat-treated chrome moly body • Will rivet hollow nose master links • Conversion kit converts #15-8066
• (4”) with folding handle for easy storage press tool kit into chain breaker and
(will not rivet solid soft-nose pins)
• Fits chain sizes 420, 428, 520, 530, and • Will push pin completely through riveting tool for 520, 525 and 530 chain
SECURITY some 630 link/side plate Description P/N Retail
& COVERS • Will push link pin completely through link • Hardened body, riveting tip and Fits 530 Chain 15-8066 $56.95
• Replaceable pin is heat treated and breaker pin for strength and durability Press Plates Only 15-0123 20.95
TRAILER & hardened for long life • Removable handle for compact storage Chain Breaker Riveting
STANDS Description P/N Retail • Perfect for your trail/road tool pack if Conversion Kit for 15-8066 15-8403 19.95
Chain Breaker 15-0420 $32.95 you have a chain with a rivet
Replacement tip 15-0421 3.95 master link
TOOLS • 1-year limited warranty
15-8467 $72.95

SHOP
SUPPLIES

DISPLAY
& PROMO MOTION PRO®
MINI CHAIN PRESS TOOL
CROSS • Tool box size for pressing on press-fit
REFERENCE side plates
• Fits all 520-530 chain
1394 • Includes hex key wrench
06-8070 $17.95
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS
STREET
TOOLS
CHAIN REPAIR TOOLS

EXHAUST

TIRES &
BikeMaster® BikeMaster® WHEELS
CHAIN BREAKER 420-630 CHAIN BREAKER
• Fits chains from 420 through 630 • Heat treated SPORT BIKE
• Comes with standard 3.5mm and • For #25 to #60 chains
4.5mm super hardened pins
BikeMaster® • Cut your own chain for the perfect length
• Replacement tip included
Description P/N Retail WINDSHIELDS
CHAIN BREAKER 420-525 • Folding handle makes for a compact Chain Breaker 15-1523 $20.95
• Fits 420-525 chains design Replacement Tip 15-1524 4.95
• Comes with standard 3.5mm super • Perfect for the tool box or fanny pack
CRUISER &
hardened pin 15-1611 $32.95 TOURING
• Cut your own chain for the perfect length
• Folding handle makes for a compact
design for carrying in tool box or SEATS &
fanny pack LUGGAGE
15-1560 $25.95
BikeMaster®
DECALS &
CHAIN BREAKER TIP GRAPHICS
• Replacement tip for 15-1560
REGINA ASSEMBLY • Keep one handy
AND RIVET TOOL 15-1561 $4.95 CONTROL
• Compact design handles assembly
and riveting
• 2-sided carrier presses on large and
small sized plates SUSPENSION
BikeMaster® • Punch design rivets pin ends to match
the rest of the chain for a factory look
D.I.D
HEAVY-DUTY CHAIN • Heat-treated for strength and durability KM501E SPORT DRIVE
BREAKER & RIVET TOOL • Fits 520, 525 and 530 chains CUTTING &
• Makes installing tight tolerances, press
• Milled from a solid billet steel
fit O and Z ring chains with rivet style RIVETING TOOL
• Complete with all 3 tips • Easy to use with BRAKE
connecting links a breeze
15-1555 $126.95 • Made in Italy step-by-step instructions
18-8427 $136.95 • This compact tool is
designed to rivet
ENGINE
D.I.D Z J rivet style links
and to cut and press side plates onto
rivet or clip style connecting links
• All steel construction is incredibly FUEL & AIR
durable for maximum long life
• Designed to be used for D.I.D 520,
PATTON CHAIN BREAKERS 525, 530 and 532 size chains
• Heat-treated ELECTRICAL
BikeMaster® • A handy denim pouch is included
• Made in the USA for storage
• For #25-#60 chain CHAIN PRESS TOOL 12-0305 $130.33
Description P/N Retail • Hardened steel CHEMICAL
Chain Breaker 15-0113 $22.99 • Super compact
Replacement Tip 15-0115 2.69 • Rounded corners to avoid injury
• For trail pack or on road tool kit, SECURITY
perfect size & COVERS
• Sturdy enough for shop use
15-1556 $15.95
TRAILER &
THE GRUNGE BRUSH STANDS
• Enables you to clean your chain with ease
• 3-sided bristles allow you to clean all 4
sides of your chain and the long bristle TOOLS
side lets you clean other parts of your
D.I.D bike like sprockets and wheels
• Regular component cleaning prevents SHOP
CHAIN CUT & RIVET TOOL premature wear and tear on chain and SUPPLIES
• Combination chain cutter and riveting sprockets which assures smooth
RK CHAIN CUTTER AND tool built into one operation of the drive train
• Eliminates the problems of over riveting • Bristle blocks are adjustable to DISPLAY
PRESS FIT RIVET TOOL or riveting pinheads off center accommodate all sizes of chain & PROMO
• Cuts chain to length • The body strength is over 10 times • Brush available individually or with a
• Press fits side plates to proper depth stronger than the previous model mild degreaser
• Either clip or rivet type • One third the size and about half CROSS
Description P/N Retail
• Flares holes in pins on rivet links the weight of the previous model REFERENCE
The Grunge Brush 31-7121 $13.95
Description P/N Retail Description P/N Retail The Grunge Brush
Cutter Rivet Tool 60-1216 $161.95 Chain Cut/Rivet Tool 12-1292 $230.95 with Cleaner 31-7120 17.95 1395
Flare Pin 60-1217 12.95 Replacement Pin 12-1293 28.95 Replacement Block Set 31-7122 5.49

SEE CATALOG UPDATES AT


TOOLS
STREET
TOOLS
TWISTING PLIERS & SAFETY WIRE

EXHAUST

TIRES &
WHEELS

SPORT BIKE

WINDSHIELDS

CRUISER &
TOURING

SEATS & MSR® BikeMaster®


LUGGAGE TWISTING PLIERS SAFETY WIRE PLIERS
• Make quick, clean, professional safety WITH 25’ STAINLESS WIRE BikeMaster®
DECALS & wire twists • Forged steel pliers, shot peened and LARGE SAFETY WIRE
GRAPHICS • Jaws lock on wire for positive grip ground clamping surfaces PLIERS WITH 25’
• Just pull and they twist automatically • Heavy duty spring and chromed
• Includes 25 ft. of safety wire retainer slide STAINLESS STEEL WIRE
CONTROL 34-0488 $31.95 • Superior clamping force, for one time • 9” pliers with 25’ wire
set up and no wire slippage • A longer version of our standard pliers
• Quick twist helix • Allows quicker braiding of larger jobs
SUSPENSION • Spring loaded return • Forged steel, shot peened, ground
• Ball bearing puller for easier operation clamping surfaces
• Cool candy apple red rust resistant • Heavy-duty spring, chromed slider,
finish spring loaded return
DRIVE • Complete with tempered wire for secure • Ball bearing puller, quick-twist helix,
MSR® fastening superior clamping
SAFETY WIRE 15-1554 $30.95 • Candy apple red for a great rust-resistant
BRAKE look
• Aircraft grade 0.032”
diameter wire • Comes complete with wire
• Used by military, aircraft, 15-1568 $49.95
ENGINE and motorsports mechanics
• 304 stainless will never rust
• 1 lb. can
FUEL & AIR 34-0489 $26.95

ELECTRICAL BikeMaster®
SAFETY WIRE
DRILL GUIDE
CHEMICAL • It’s one thing to have safety wire and
pliers... Another to drill that 1/8” hole
HELIX® • This is the perfect way to avoid drill bit
SECURITY
& COVERS
RACING SAFETY WIRE breakage
• 1/4 lb. spool • Perfectly align, guide, and support
• Stainless Steel those tiny drill bits across the corners of 07-0631
TRAILER & • .032” diameter nuts and bolts
STANDS • 90 feet • This is the way it’s done in the racing,
53-0671 $11.81 and the aerospace industry, and should
be done everywhere
TOOLS
15-1650 $54.95
BikeMaster® SAFETY WIRE KIT
SHOP SAFETY WIRE 0.032” 15-1565 • Used to safely wire nuts and bolts
SUPPLIES
• Our own specially tempered stainless • Comes complete with winder tool, wire,
steel safety wire 15-1566 25 ft. of .032 stainless steel safety wire
DISPLAY • Stiffer than the “full soft” annealed temper and lock washers
& PROMO of other manufacturers Description P/N Retail
• Holds shape better Complete Kit (Starter Kit) 07-0631 $20.95
CROSS • Resists sheering better Replacement Parts
REFERENCE • Superior 300 series stainless steel Safety Wire (RL/25ft.) 07-0632 $8.95
Size P/N Retail Wapid Winder 07-0637 10.95
1396 1/4 lb. reel 15-1566 $11.95
1 lb. can 15-1565 25.95
STREET • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & OFFROAD CATALOGS

You might also like