You are on page 1of 1

Specifications

Battery Voltage: 9 Volts DC (Alkaline Battery)


Optional Input Voltage: 6 - 12 Volts DC @500mA Wall Transformer/Adaptor, Automob
ile Battery, or Solar Panel.
Output Voltage at Colloidal Silver Wires: 31 Volts DC, (+/- 1 Volt) Constant-Vol
tage Output
Output Current at Colloidal Silver Wires: 1.0 milliamps (+/- 0.5ma) Constant-Cur
rent Output
Ionic-Colloid Silver Production: 3 - 5ppm (parts per million) for 2 hours for 16
ounces distilled water.
Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in th
e range of 0.005 - 0.015 microns when made as directed.
Ionic-Colloid Silver Color: Clear or Pale Gold.
Silver Wire Life: Can make many gallons ionic/colloidal silver per set of Fine S
ilver Wires, when made as directed.
Output Voltage at Gold Stimulator Probes: 31 Volts (Peak per Cycle, 62 Volts Pea
k-Peak) Bi-Phasic at ~3.92 Hertz (cycles per second) +/- 1 Hz.
Output Current at Gold Stimulator Probes: ~12 milliamps maximum when probes shor
ted and Control Knob on full intensity.
The Fine Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 8" long (1.5 mm diame
ter x 20.3 cm long) and are constructed of only Pure Fine (.9999 pure) Silver Wi
re.
Bio-Stimulator Probes are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long
) and are constructed of heavy copper.
Weight of The Silver Pulser unit is only a few ounces - very lightweight.

You might also like