You are on page 1of 10

From :Microshal.webs.

com
Mobile secrets : By marshal Ali Masri
Some info in case u have a NOKIA Mobile...

1 Imagine ur cell battery is very low, u r expecting an


important call and u don't have a charger.
Nokia instrument comes with a reserve battery. To
activate,
key is "*3370#"
Ur cell will restart with this reserve and ur instrument
will show a 50% incerase in battery.
This reserve will get charged when u charge ur cell
next
time.
*3370# Activate Enhanced Full Rate Codec (EFR)-Your phone
uses the best sound quality but talk time is reduced by approx.
5%
#3370# Deactivate Enhanced Full Rate Codec( EFR)

*#4720# Activate Half Rate Codec - Your phone uses a


lower
quality sound
but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec

2 *#0000# Displays your phones software version,

1st Line : Software Version,


2nd Line : Software Release Date,
3rd Line : Compression Type

3 *#9999# Phones software version if *#0000# does not work

4 *#06# For checking the International Mobile Equipment


Identity
(IMEI Number)

5 #pw+1234567890+1# Provider Lock Status. (use the "*"


button
to obtain the "p,w" and "+" symbols)

6 #pw+1234567890+2# Network Lock Status. (use the "*" button


to
obtain the "p,w" and "+" symbols)

7 #pw+1234567890+3# Country Lock Status. (use the "*" button


to
obtain the "p,w" and "+" symbols)

8 #pw+1234567890+4# SIM Card Lock Status.(use the "*" button


to
obtain the "p,w" and "+" symbols)

9 *#147# (vodafone) this lets you know who called you last
*#1471# Last call (Only vodofone)

10 *#21# Allows you to check the number that "All Calls" are
diverted To

11 *#2640# Displays security code in use

12 *#30# Lets you see the private number

13 *#43# Allows you to check the "Call Waiting" status of your


phone.

14 *#61# Allows you to check the number that "On No Reply"


calls
are diverted to

15 *#62# Allows you to check the number that "Divert If Unrea


chable(no service)" calls are diverted to

16 *#67# Allows you to check the number that "On Busy Calls"
are
diverted to

17 *#67705646#R emoves operator logo on 3310 & 3330

18 *#73# Reset phone timers and game scores

19 *#746025625# Displays the SIM Clock status, if your phone


supports this power saving feature "SIM Clock Stop Allowed", it
means you will get the best standby
time
possible

20 *#7760# Manufactures code

21 *#7780# Restorefa ctory settings

22 *#8110# Software version for the nokia 8110

23 *#92702689# (to rember *#WAR0ANTY#)


Displays -

1.Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no
repairs),
5.Transfer User Data.
To exit this mode -you need to
switch
your phone off then on again

24 *#94870345123456789# Deactivate the PWM-Mem

25 **21*number# Turn on "All Calls" diverting to the phone


number
entered

26 **61*number# Turn on "No Reply" diverting to the phone


number
entered

27 **67*number# Turn on "On Busy" diverting to the phone number


entered

28 12345 This is the default security code press and hold #

Nokia Codes Tips and Tricks


To check the IMEI (International Mobile Equipment Identity) Type-

*#06#

Information you get from the IMEI-

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

To check the phones Software revision type-

*#0000#

Information you get from the Software revision-

V 05.31

18-02-99

NSE-3

1ST Line = Software revision

2ND Line = The date of the software release

3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)
Serial number (IMEI)

Production date (MM/YY)

Purchase date (MM/YY) You can only enter the date once.

Date of last repair (0000=No repair)

Transfer user data to another Nokia phone via Infra-Red

Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory
default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to
where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word
"Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word
"Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.


3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow
twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus
like the "Profiles" menu.

EFR CALL QUALITY

To activate EFR (Enhanced Full Rate) Enter the code-

*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

#3370#

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections
touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do
this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute".
Now you can use your phone for checking out what people are talking about in a room. Just place it
under a table in a room and call it. The phone receives the call without ringing and you can listen to what
people are saying.
NETWORK MONITOR

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program
some chips inside of your phone.

Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

Take apart the phone.

De-solder the EEPROM (ATMEL AT 24C64).

Read out the data with an EEPROM programmer and save it to a file (Backup).

If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".

If you have v5.24 then change the address "0378" from "00" to "FF".

Write the new data to the EEPROM and solder it back to the phone,

Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

Carrier number

MS RX Level in DBM

Received signal quality

MS TX power level

C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

RTL (Radio link timeout).

Timeslot
Indication of the transmitter status

Information on the Network parameters.

TMSI (Temporary Mobile Subscriber Identity).

Cell identification (Cell ID, Number of cells being used).

MCC (Mobile country code)

MCN (Mobile network code)

LAC (Location area code)

Ciphering (On/Off)

Hopping (On/Off)

DTX (On/Off)

Discard cell barred information

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they
both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK
Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800.
To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to
transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other
network simcard. If you find that your phone is locked you can try different software to unlock it. (we
havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10
digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number,
because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.


COUNTRY-LOCK

NETWORK-LOCK

PROVIDER-LOCK

SIMCARD-LOCK

The code to read out the sim-lock status of your phone is

#PW+(MASTERCODE)+(Y)#

# = DOUBLE-CROSS

W = PRESS "*" THREE TIMES

P = PRESS "*" FOUR TIMES

+ = PRESS "*" TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO 4

The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter
every combination you want!

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for
the sim-card lock.

SIM-LOCK CHECKS

#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS

#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS

#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS


#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

You might also like