Professional Documents
Culture Documents
)
CLI views have passwords, but superviews do not have passwords.
Users logged in to a superview can access all commands specified within the associated CLI views.
2 What are two characteristics of the SDM Security Audit wizard? (Choose two.)
It uses interactive dialogs and prompts to implement AAA.
It automatically enables Cisco IOS firewall and implements Cisco IOS IPS security configurations to secure the router.
It displays a screen with Fix-it check boxes to let you choose which potential security-related configuration changes to impleme
It requires users to first identify which router interfaces connect to the inside network and which connect to the outside network
It is initiated from CLI and executes a script in which the managment plane functions and forwarding plane services are tested
against known vulnerabilities.
3 What is the minimum recommended modulus key length for keys generated to use with SSH?
256
512
768
1024
2048
Refer to the exhibit. Which statement regarding the JR-Admin account is true?
JR-Admin can issue show, ping, and reload commands.
JR-Admin cannot issue any command because the privilege level does not match one of those defined.
5 By default, how many seconds of delay between virtual login attempts is invoked when the login block-for command is configured?
one
two
three
four
five
6 Which statement describes the operation of the Cisco SDM Security Audit wizard?
The wizard configures a router to prevent unauthorized access.
The wizard monitors network data and logs possible unauthorized or malicious traffic.
The wizard logs the effectiveness of network security measures for baseline comparisons.
Refer to the exhibit. What is the significance of secret 5 in the generated output?
The ADMIN password is encrypted using DH group 5.
The ADMIN password is encrypted via the service password-encryption command.
Refer to the exhibit. Routers R1 and R2 are connected via a serial link. One router is configured as the NTP master, and the other is
NTP client. Which two pieces of information can be obtained from the partial output of the show ntp associations detail command
R2? (Choose two.)
Both routers are configured to use NTPv2.
9 Which three areas of router security must be maintained to secure an edge router at the network perimeter? (Choose three.)
physical security
flash security
router hardening
zone isolation
10 Which statement matches the CLI commands to the SDM wizard that performs similar configuration functions?
aaa configuration commands and the SDM Basic Firewall wizard
auto secure privileged EXEC command and the SDM One-Step Lockdown wizard
class-maps, policy-maps, and service-policy configuration commands and the SDM IPS wizard
setup privileged EXEC command and the SDM Security Audit wizard
Commonly known community strings should be used when configuring secure SNMP.
If the manager sends one of the correct read-only community strings, it can get information and set information in an agent.
SNMP read-only community strings can be used to get information from an SNMP-enabled device.
SNMP read-write community strings can be used to set information on an SNMP-enabled device.
12 Which three services on a router does Cisco SDM One-Step Lockdown enable? (Choose three.)
SNMP
TCP intercepts
13 Which service is enabled on a Cisco router by default that can reveal significant information about the router and potentially make it
more vulnerable to attack?
HTTP
CDP
FTP
NTP
TFTP
14 An administrator defined a local user account with a secret password on router R1 for use with SSH. Which three additional steps a
required to configure R1 to accept only encrypted SSH connections? (Choose three.)
configure the IP domain name on the router
15 If AAA is already enabled, which three CLI steps are required to configure a router with a specific view? (Choose three.)
assign a secret password to the view
SNMP
syslog
security banner
interface IP address
17
Refer to the exhibit. Based on the output of the show running-config command, which type of view is SUPPORT?
secret view, with a level 5 encrypted password
root view, with a level 5 encrypted secret password
18 Which two operations are required to implement Cisco SDM One-Step Lockdown? (Choose two.)
Choose the One-Step Lockdown feature.
Select the Firewall and ACL task on the SDM Configuration screen.
19
Refer to the exhibit. What two facts can be determined from the output? (Choose two.)
The Cisco IOS image and configuration files have been properly secured.
ROMmon mode will be inaccessible upon entering the privileged EXEC reload command.
The Cisco IOS Resilient Configuration feature has detected an image version mismatch.
20
Refer to the exhibit. Which two statements describe the current SDM logging setup? (Choose two.)
Buffered logging will be enabled on the router for Logging Level 7 messages.
Buffered logging will be enabled on the syslog server for Logging Level 7 messages.
All messages with a trap level of 4 and higher (less critical) will be logged.
All messages with a trap level of 4 and lower (more critical) will be logged.
The router interface IP address that is connected to the syslog server is 192.168.1.3.
The syslog server IP address is 192.168.1.3.
21 Which three commands are required to restore a primary bootset from a secure archive on a router on which Cisco IOS resilience is
enabled? (Choose three.)
Restart the router in ROM monitor mode and display the secure bootset Cisco IOS image name using the dir command.
Restart the router, enter privileged EXEC mode, and display the secure bootset Cisco IOS image name using the show flash
command.
Boot the secure bootset Cisco IOS image using the boot command with the filename.
Copy the secure bootset Cisco IOS image to flash using the copy IOS-backup-image flash command.
Restore the secure configuration file using the copy config-backup flash command.
Restore the secure configuration file using the secure boot-config restore filename command.
22 Which set of commands are required to create a username of admin, hash the password using MD5, and force the router to access
internal username database when a user attempts to access the console?
R1(config)# username admin password Admin01pa55
R1(config)# line con 0
R1(config-line)# login local
R1(config)# username admin password Admin01pa55
R1(config)# line con 0
R1(config-line)# login internal
R1(config)# username admin Admin01pa55 encr md5
R1(config)# line con 0
R1(config-line)# login local
R1(config)# username admin secret Admin01pa55
R1(config)# line con 0
R1(config-line)# login local
R1(config)# username admin secret Admin01pa55
R1(config)# line con 0
R1(config-line)# login internal
23 Which recommended security practice prevents attackers from performing password recovery on a Cisco IOS router for the purpose
gaining access to the privileged EXEC mode?
Keep a secure copy of the router Cisco IOS image and router configuration file as a backup.
Disable all unused ports and interfaces to reduce the number of ways that the router can be accessed.
Configure secure administrative control to ensure that only authorized personnel can access the router.
Locate the router in a secure locked room that is accessible only to authorized personnel.
24
Refer to the exhibit. What two pieces of information can be gathered from the generated message? (Choose two.)
This message is a level five notification message.
This message appeared because a minor error occurred requiring further investigation.
This message appeared because a major error occurred requiring immediate action.
This message indicates that service timestamps have been globally enabled.
This message indicates that enhanced security was configured on the vty ports.
25What are three requirements that must be met if an administrator wants to maintain device configurations via secure in-band managem
(Choose three.)
network devices configured to accommodate SSH
26 An administrator needs to create a user account with custom access to most privileged EXEC commands. Which privilege comman
used to create this custom account?
privilege exec level 0