HIMAX Electric Screwdriver Instruction

HOW TO OPERATE
ELECTRIC SCREWDRIVERS
This document is done by NINGBO TAI-LI A.E.T. CO. LTD.
We will demonstrate HIMAX T series DC electric screwdrivers here
Professional Electric Screwdrivers Tools & Equipment for accurate assembly line
Torque Meter Spring Separator
Screw Counter
寧波台力精密電子工具有限公司
NINGBO TAI-LI A.E.T. CO. LTD.
TEL: (574)8736-8178 FAX: (574)8736-8078
網站 : www.ehimax.com
E-MAIL: mail@ehimax.com
DC ELECTRIC SCREWDRIVERS
WITH POWER SUPPLY
DC electric screwdrivers need to be used with power supply, which apparently increase
s the stability and safety of the electric screwdrivers
HIMAX T series electric screwdrivers have to be used with power supply CLT-50(for all
models) & CLT-50S(for T2, T3, T4 only)
CLT-50 & CLT-50S can also be used with other compatible electric screwdriver brands
T2
T3
T4
T5
TEL: (574)8736-8178 FAX: (574)8736-8078
THE CATEGORIES OF
ELECTRIC SCREWDRIVERS
Electric screwdrivers classified by power source ：
A. DC type electric screwdriver ：
Used with power pack, which can switch
alternating current to direct current
DC electric screwdrivers are more stable, safer,
and have longer product lives
B. AC type electric screwdriver ：

Directly input alternating current (AC220V/110V)
Easy and convenient to use
TEL: (574)8736-8178 FAX: (574)8736-8078
DC TYPE ELECTRIC SCREWDRIVER
DC electric screwdrivers need to be used with power supply, which apparently increase
s the stability and safety of the electric screwdrivers
HIMAX T series electric screwdrivers have to be used with power supply CLT-50(for all
models) & CLT-50S(for T2, T3, T4 only)
CLT-50 & CLT-50S can also be used with other compatible electric screwdriver brands
電源供應器
Power Supply
Power Pack
TEL: (574)8736-8178 FAX: (574)8736-8078
AC TYPE ELECTRIC SCREWDRIVERS
AC type electric screwdrivers can be directly plugged in and use without additional po
wer pack. Convenient and easier to use.
However, compared with DC electric screwdrivers, AC electric screwdrivers are less sta
ble and more likely to break down.
Plug In
TEL: (574)8736-8178 FAX: (574)8736-8078
ILLUSTRATION OF MAIN PARTS
Bit Holder Collar: Push it to fit up/dismantle the bit

Switch Lever
Hanger
For/Rev Switch Bit
The Categories of bits

TEL: (574)8736-8178 FAX: (574)8736-8078
OPERATING INSTRUCTION
 Make sure the power is switched off to install or replace screwdriver bits; press the f
ront-end iron cap will allow the screwdriver bits to be inserted or released.
 It is recommended to suspend the electric screwdriver by a flexible balancer for eas
y operation and prevent its dropping.
 Adjust the torque dial to the proper position according to the dial/torque table for ea
ch model.
 The forward/reverse switch should be set to the forward position when fastening scr
ews. Press the start switch to complete the operation. The automatic control model
will shut off the power and stop the rotation of the screwdriver bit as soon as the set
torque value is reached.
 Position the forward/reverse switch to reverse to loosen screws.
TEL: (574)8736-8178 FAX: (574)8736-8078
Digital Torque Meter Balancer E-MAIL: mail@ehimax.com
OPERATING INSTRUCTION (CON
T.)
 Use hands to hold the electric screwdriver during operation. Keep it in a perpendicul
ar position with the screw and apply pressure slightly to prevent slipping.
 Use hands or other means to fix the object operated and operate the electrical power
screwdriver safely.
 Do not press the start key abruptly again after the completion of the fastening operat
ion each time.
 Do not switch the forward/reverse position and improper switch operations when the
motor is running to prevent the short-circuit of the start switch.
 Use it under the normal operation frequency ( 8 working hours per day and fasten 80
0-1000 screws per hour) without exceeding the operation load will extend the life tim
e of the electric screwdriver and reduce the occurrences of malfunction.
 Please do not use this type of electric screwdriver to fasten wooden screws.
TEL: (574)8736-8178 FAX: (574)8736-8078
NOTE
 This electric screwdriver is designed for indoor use only. Please do not use it in ou
tdoors or wet environment to prevent the danger of electrocution.
 Pay attention to the voltage specification. Make sure the switch is in the OFF positi
on when you plug in the power.
 Unless you are a trained maintenance personnel, do not disassemble the device le
st it cause dangers or more damages.
 Please use the original power transformers for the TL model lest it generates dang
ers or imprecise torque due to wrong output specification.
REGULAR SIMPLE MAINTENANCE

 Check to see whether all the parts, shell, and power lines are intact all the time to
ensure normal operations.
 Unplug the power plug and turn off the power before doing any maintenance
operation to ensure safety.
 For every 1000 hours operation or half year, the following cleaning and
maintenance operations to the machine body and the inside are required:
TEL: (574)8736-8178 FAX: (574)8736-8078
HIMAX T2, T3
HIMAX TL2000/3000
Torque Controlled DC Type electric screwdriver
Precise Low torque type 0.2~2.5 Kgf-cm
>Precise torque gives full power 　

>Stability
>Accuracy
>No noise
Main applicable products

Cameras, timekeepers, mobiles, digital cameras, HDD, CD, laser reading heads, UPS na
vigators, small VTR, computers, TFT panels and NB notebook PC.
TEL: (574)8736-8178 FAX: (574)8736-8078
HIMAX T4, T5, T6
HIMAX TL4000/5000/6000
Torque controlled DC Type electric screwdriver
Middle torque type 1.0~12.0 Kgf-cm
>Superior quality sustaining 15,000,000 cycles of test

>Stability 　
>Accuracy
>High efficiency

Digital cameras, HDD, CD, laser reading heads, car-carried sound equipment, UPS navi
gators, small VTR, small computers, TFT panels, NB notebook PC, facsimile sets, photo
printers, telescopic antenna, communication equipment, video recorders, video game
machines and car lamps etc.
TEL: (574)8736-8178 FAX: (574)8736-8078
HIMAX T65 DC ELECTRIC SCREWDRIVERS
HIMAX TL-6500
Torque controlled DC type electric screwdrivers
High torque type 2.0~20.0 Kgf-cm
>Best choice for high torque and high efficient operation

>Stability 　
>Durability
>High efficiency

Cameras, mobiles, HDD, CD, laser reading heads, car-carried sound equipment, small V
TR, UPS navigators, small computers, TFT panels, NB notebook PC, video game machi
nes, facsimile sets, TV sets, photo printers, telescopic antenna, communication equipm
ent, video recorders, car lamp and lighting fixtures etc. .
TEL: (574)8736-8178 FAX: (574)8736-8078

HIMAX Electric Screwdriver Instruction

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HIMAX Electric Screwdriver Instruction

Uploaded by

Copyright:

Available Formats

HOW TO OPERATE

B. AC type electric screwdriver ：

Bit Holder Collar: Push it to fit up/dismantle the bit

For/Rev Switch Bit

The Categories of bits

REGULAR SIMPLE MAINTENANCE

>Precise torque gives full power

Main applicable products

>Superior quality sustaining 15,000,000 cycles of test

Main applicable products

>Best choice for high torque and high efficient operation

Main applicable products

You might also like