Professional Documents
Culture Documents
about Dek
Acquired in 2001 by Tyco Electronics Corporation, Dek
applications.
fax 919.557.8498
e-mail custserv@dekusa.com
2
If you are looking for a specific product and do not see it
phone 800-323-1419
fax 919-557-8498
e-mail custserv@dekusa.com
table of contents
PRODUCT INFORMATION AND SPECIFICATIONS
Product Information .................................................................................. 04
Material Specifications.............................................................................. 05
Adhesive Mounting System ...................................................................... 05
3
Tyco Electronics has assembled the following data regarding clip and
raceway specifications and mounting applications in a wide variety of
equipment and systems. Recommendations apply for most electronic,
electrical, and electromechanical applications.
Should you encounter any difficulty in mounting or using our clips or
raceway, contact Tyco Electronics. Our application engineers will be happy
to provide up-to-date assistance to assure the proper application of our
wire and cable management products.
MOUNTING SURFACES
Smoothness and cleanliness of the mounting surfaces are important in
achieving a strong bond. The pliable foam carrier adapts to minor surface
variations thus allowing adhesive to form a strong bond.
Mounting surfaces must be clean and dry for proper adhesive performance.
product information If you are not sure that the surface is clean and dry, it is advisable to perform
a cleaning procedure. Commonly encountered contaminants include dust,
dirt, grease, oil, moisture, and others such as mold release agents and
silicone residue.
For smooth surfaces of any type, extruded or molded clips are
recommended. For rough surfaces, a molded clip is advised since it has an
extremely flat base which contributes to a better adhesive bond on uneven
surfaces.
INSTALLATION
Adhesive is for use in interior environments only.
1. Peel backing from clip or raceway and press firmly onto the mounting
surface. Use approximately 12 lbs. of pressure for one second to assure a
good bond.
2. Leave newly mounted product undisturbed for at least five minutes prior to
any loading.
3. Clips and raceway will hold up to 50% of Rated Static Load five minutes
after mounting. We highly recommend a 24 hour wait period before
applying full Rated Static Loads.
DEKDUCT RACEWAY
Tyco Electronincs' Dek Cable Accessories are available in Dekduct raceways
with both a two piece (base and cover) and one piece latching variety. Each
version can be applied to power applications as well as for low voltage, class
2 circuits. When used for power applications, the raceway needs to be
mechanically mounted every 8 inches.
A center channel molded into each version of the Dekduct raceway provides
the means to connect additional lengths and fittings. The same channel
allows for installation of a divider strip thereby enabling both power and
communication cables to coexist in the 1 inch raceway.
Installation is quick and easy. Merely peel off the protective backing and press
clip firmly in place (12 lbs. of pressure for one second). Clips will hold wiring
and cable up to 50% of Rated Static Load just one minute after mounting.
For full Rated Static Loads, a 24 hour waiting period is highly recommended.
Mounting surfaces include: metal, glass, wood, plastic, and almost any
clean, smooth, dry surface (free from corrosion, moisture, oil, dust, dirt,
and other contaminants).
For tough surface mounting applications, Dek products have an adhesive for
applications such as sand finish dry wall, mild stucco, wood, and even cinder
block. Designed to fit harmoniously into any environment, this high performance
adhesive gets into surfaces instantly, saving you time and money.
material specifications
Material Material Characteristics Color
Nylon 6/6 High tensile strength. Excellent abrasive and chemical resistance. High impact
Natural, Light Gray
and flexural strength.
Nylon 6/6 Same characteristics as Nylon 6/6 above. Carbon added for weather resistance,
Black
Weather Resistant including U.V. light
Nylon 6/6 Same characteristics as Nylon 6/6 above. Heat stabilized for higher
Natural, Black
Heat Stabilized operating temperatures.
Polypropylene Non-hygroscopic. Extremely flexible. Will not become brittle over time. Excellent
White
General Purpose chemical resistance.
Polypropylene
Same characteristics as Polopropylene above. Chemical additives for flame retardant. Medium Gray
Flame Retardant
Polycarbonate High impact strength. Resists weather and U.V. light. Excellent clarity. Clear
PVC Ivory, Black, Clear,
Inherently flame retardant. High impact strength. Excellent chemical resistance.
Gray, White, Almond
UL
Tensile
Material Flammability Maximum Continuous Minimum Continuous % Water Absorption
Strength Use Temperature Use Temperature (24 Hours)
Rating
Nylon 6/6 12,000 PSI 94V-2 185˚F/85˚C -40˚F/-40˚C 1.0 - 2.8
Nylon 6/6 - Weather Resistant 12,000 PSI 94V-2 185˚F/85˚C -40˚F/-40˚C 1.0 - 2.8
Nylon 6/6 - Heat Stabilized 12,000 PSI 94V-2 260˚F/126˚C -40˚F/-40˚C 1.0 - 2.8
Polypropylene - General Purpose 4,400 PSI 94V-2 185˚F/85˚C -40˚F/-40˚C .01 - .03
Polypropylene - Flame Retardant 4,900 PSI 94V-0 220˚F/104˚C -40˚F/-40˚C .01
Polycarbonate 9,500 PSI 94V-2 220˚F/104˚C -40˚F/-40˚C .15
PVC 6,200 PSI 94V-0 150˚F/65˚C -20˚F/-28˚C .20
5
Series 011 Series 012
Flat and Round Wire Fasteners
6 Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com
Series 014 Series 016 Series 019
Deklamp series 016 dual cable clamps can be double stack mounted and uses
standard 5/16" nuts, washers, and bolts. The nut can be recessed for low
profile mounting and can be wrenched from either side thus eliminating the
need for special mounting tools, sockets, or drivers.
Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com 7
Series 020 Series 021
Flat and Round Wire Fasteners
/8
3
D
021-0500 1.000 1.210 0.110 0.680 0.640 1/
✔
C 2
Holds Various Types 021-0750 1.150 1.450 0.125 0.990 0.640 3/4
✔ Available in V-O
Polypropylene Material
8 Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com
Series 021R Series 022 Series 023
Part Number Mounting Surface Radius Max. Wire Bundle Dia (in.)
✔ Exclusive Quick
Lock/Release Feature 021-0225R 3 /
5 16 /
13 16
021-0331R 2 1/4 /
13 16
✔ Exclusive Quick
Lock/Release Feature
✔ Economy with Excellent
Performance
C
✔ Advanced Adhesive
Mounting System
✔ Extruded,
A B
Flame
Resistant PVC Copolymer
✔ Wide
Sizes
Selection of
Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com 9
Series 024 Series 025
Flat and Round Wire Fasteners
Extruded from transparent rigid PVC, Series 024 wire mounting clips blend with
today’s color-coordinated homes, offices, institutions, and factories.
Installation is quick and easy. Simply peel the backing and press the clip
into place.
1
⁄16
⁄4
B 024-0040 1.250 1.750 5
⁄16
✔ Large
A
Adhesive 024-0050 1.250 2.000 3
⁄8
Area For Mounting 024-0060 2.000 2.250 1
⁄2
Extruded from durable gray PVC, Series 025 shell clips are ideal for economical
wire and cable retention applications.
The flame and chemical resistant PVC also has excellent flexural strength
and electrical properties.
Installing Series 025 is quick and easy with Tyco Electronics' advanced
adhesive mounting system. Simply remove backing from adhesive and press
the clip firmly into place.
Note: Deklip series 025 shell clips are designed with self-closing feature. When locking
clips are required, Tyco Electronics recommends Series 021, 022, and 023.
1
⁄4
⁄2
1
3
⁄2
⁄4
025-1000 1.250 1.500 0.740 3
⁄4 1
✔ Advanced
B
A
Adhesive
Mounting System
✔ Rugged,
Open
Flame
Resistant V-O PVC E
✔ Self-Closing
10 Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com
Series 026 Series 027
✔ Holds
E
Various Types A
D
C
of Tubing
✔ Available in V-O
Polypropylene Material
B
Side Entry
C
✔ Locking Model Secures
A B A B C
C
Wire Runs or Bundles A B
✔ Lock/Release Feature D
Simplified Routing D
D
B
Dimensions (in.)
Part Number Entry Type
A B C D E
A
027-0110 0.166 0.425 0.610 0.221 FUNNEL ENTRY
027-0120 0.374 0.425 0.803 0.221 FUNNEL ENTRY
027-0130 0.721 0.425 1.160 0.221 FUNNEL ENTRY C
027-0140 1.040 0.425 1.470 0.221 FUNNEL ENTRY
027-0210 0.221 0.394 0.539 0.221 SIDE ENTRY D
027-0320 0.417 0.634 0.847 0.221 FUNNEL ENTRY
027-0410 0.236 0.433 0.543 0.217 LOCKING Part Dimensions (in.) Max.
027-0420 0.433 0.433 0.740 0.217 LOCKING Number Bundle
A B C D E Dia (in.)
027-0430 0.669 0.520 0.976 0.217 LOCKING
027-0440 0.906 0.709 1.264 0.217 LOCKING 027-0750 1.550 0.300 0.310 0.330 0.780 /
3 4
Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com 11
Series 028 Series 029 Series 030
Flat and Round Wire Fasteners
The quick clamp/release action of the Series 028 Foam Spacer speeds
rewiring and cable adjustments.
■ DEKLIP SERIES 029 AND 030 ROUND WIRE PUSH MOUNT CLIP
Deklip push mount clips are used in a wide variety of environmental conditions Material: UL Recognized 94V-2 Nylon
and on any surface up to 0.150" thick. Just snap into a 0.250" hole and the
push mount will hold 25 lbs. continuous load and 50 lbs. impact load. Each Color: Gray
series holds a minimum of 3/16" diameter wire bundle and a maximum of a 1" Specifying Notes: 1. To install, drill a 0.250" mounting hole and insert base
bundle. The clip material, UL 6/6 nylon, is self-extinguishing and will not creep of clip into hole.
or deform at elevated temperatures.
✔ Polypropylene Material A
Quick Lock/Release B
Feature .250”
Series 029 For Chassis and Panels 0.020” to 0.080” Thick Series 030 For Chassis and Panels 0.080” to 0.150” Thick
Part Dimensions (in.) Max. Part Dimensions (in.) Max.
Number Bundle Number Bundle
A B C D E F Dia (in.) A B C D E F Dia (in.)
029-0188 0.550 1.000 0.390 0.380 0.200 0.300 3/16 030-0188 0.550 1.000 0.390 0.380 0.200 0.370 3/16
029-0250 0.580 1.000 0.440 0.410 0.200 0.300 1/4 030-0250 0.580 1.000 0.440 0.410 0.200 0.370 1/4
029-0375 0.650 1.000 0.530 0.500 0.200 0.300 3/8 030-0375 0.650 1.000 0.530 0.500 0.200 0.370 3/8
029-0500 0.770 1.190 0.720 0.600 0.200 0.300 1/2 030-0500 0.770 1.190 0.720 0.600 0.200 0.370 1/2
029-0750 0.880 1.380 0.970 0.670 0.200 0.300 3.4 030-0750 0.880 1.380 0.970 0.670 0.200 0.370 3/4
029-1000 1.370 1.880 1.300 1.000 0.200 0.300 1 030-1000 1.370 1.880 1.300 1.000 0.200 0.370 1
12 Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com
Series 031
C
B
Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com 13
Series 033
Flat and Round Wire Fasteners
✔ Economical E
F
Series 033 & 034 For Chassis and Panels 0.020" to 0.080" Thick Series 033 & 034 For Chassis and Panels 0.020" to 0.080" Thick
Max. Max. Max. Max.
Part Dimensions (in.) Inside Inside Part Dimensions (in.) Inside Inside
Number Width Height Number Width Height
A B C D E F (in.) (in.) A B C D E F (in.) (in.)
033-0250 0.750 1.750 0.435 0.620 0.200 0.330 1 1/4 1/4 033-0250S 0.750 1.770 0.585 0.620 0.200 0.330 1 1/4 1/4
033-0500 0.750 1.750 0.695 0.620 0.200 0.330 1 1/4 1/2 033-0500S 0.750 1.770 0.959 0.620 0.200 0.330 1 1/4 1/2
034-0357DN1 0.750 4.000 0.430 0.615 0.200 0.330 3 1/2 5/16 034-0250S 0.750 3.00 0.585 0.620 0.200 0.330 2 1/2 1/4
034-0750 0.750 3.000 0.955 0.620 0.200 0.330 2 1/2 3/4 034-0250SD 0.750 3.00 0.585 0.620 0.200 0.330 2 1/2 1/4
034-0755 0.750 3.000 0.955 0.620 0.200 0.330 2 1/2 3/4
034-1000 0.750 3.570 0.955 0.620 0.200 0.330 3 3/4
Series 035 & 036 For Chassis and Panels 0.080" to 0.150" Thick Series 035 & 036 For Chassis and Panels 0.080" to 0.150" Thick
Max. Max. Max. Max.
Part Dimensions (in.) Inside Inside Part Dimensions (in.) Inside Inside
Number Width Height Number Width Height
A B C D E F (in.) (in.) A B C D E F (in.) (in.)
035-0250 0.750 1.750 0.435 0.620 0.200 0.390 1 1/4 1/4 035-0250S 0.750 1.770 0.585 0.620 0.200 0.390 1 1/4 1/4
035-0500 0.750 1.750 0.695 0.620 0.200 0.390 1 1/4 1/2 036-0250S 0.750 3.00 0.585 0.620 0.200 0.390 2 1/2 1/4
036-0750 0.750 3.00 0.955 0.620 0.200 0.390 2 1/2 3/4
036-1000 0.750 3.570 0.955 0.620 0.200 0.390 3 3/4
14 Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com
Series 037 Series 038
✔ Adhesive
Mounting
Base for Easy
D D
✔ Remarkable
B
Holding B
D
D
Power
✔ Available in V-O
Polypropylene Material
C
A
C
E
A B
B
037-0250 0.750 1.770 0.435 0.620 1 1/4 1/4 037-0250S 0.750 1.770 0.550 0.620 1 1/4 1/4
037-0500 0.750 1.770 0.695 0.620 1 1/4 1/2 037-0350S 0.750 2.350 0.550 0.620 1 3/4 3/8
038-0250 0.750 3.000 0.435 0.620 2 1/2 1/4 038-0250S 0.750 3.000 0.550 0.620 2 1/2 1/4
038-0500 0.750 3.000 0.695 0.620 2 1/2 1/2
038-0750 0.750 3.000 0.955 0.620 2 1/2 3/4
038-1000 0.750 3.570 0.955 0.620 3 3/4
Max. Max.
Dimensions (in.) Inside Inside
Part
Width Height
Number
A B C D E (in.) (in.)
037-0125S 0.500 1.595 0.200 0.375 0.080 1 1/4 1/8
038-0125S 0.500 2.830 0.200 0.375 0.080 2 1/2 1/8
Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com 15
Series 039 and 040 Series 050
Flat and Round Wire Fasteners
Size of wire tie opening is 0.220" x 0.075". Specifying Notes: 1. Select proper cable tie mounts for your specific panel
or frame thickness and size of wire tie. To install,
simply drill a mounting hole (0.250") and insert the
cable tie mount into the hole.
Dimensions (in.)
✔ Fast Installation Part
Number A B C D E
050-0014 0.315 0.800 0.184 0.315 0.490
✔ High Load Factors 050-0020 0.315 0.800 0.184 0.315 0.593
E
D
✔ Designed
Spaces
for Small
C
A
✔ High Reliability
1/4” Hole
16 Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com
Series 050 Series 050 Series 055
Dimensions (in.)
✔ Built Stronger to Last
Part Mounting
Number A B C
A
Longer 050-0003 0.750 0.750 0.150 #4 Screw
050-0003A 0.750 0.750 0.150 Adhesive
✔ Available in 3 Sizes C
050-0004
050-0004A
1.125
1.125
1.125
1.125
0.190
0.190
#8 Screw
Adhesive
B 050-0005 1.500 1.500 0.250 #8 Screw
050-0005A 1.500 1.500 0.250 Adhesive
Molded from tough 6/6 black nylon, Series 050 cable tie grommets are easy to Material: UL Recognized 94V-2 Nylon
install; simply snap grommet into a predrilled 0.500" hole. Then slide a wire tie
through the retaining slot, and the cable can be locked securely into place. The Color: Black
button top provides a smooth, well-finished appearance to exposed surfaces.
Grommets are designed for 0.146" panels, such as those used in telephone
and utility boxes.
A Dimensions (in.)
Part
✔ Easy Installation Number A B C D E
Dimensions (in.)
✔ Low Profile Part
Number A B C D
B 055-0001 0.424 0.550 1.000 0.750
✔ Large Adhesive Base
for Easy Mounting A
✔ Economical D
C
Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com 17
Series 058
Flat and Round Wire Fasteners
Manufactured from a glass filled polyamide material, the Dektight seals have Trumpeted Dektight seals are available to prevent sharp bending of cables.
exceptional strength and excellent long term locking capabilities. Once locked,
the threads will not creep, relax, or vibrate loose over time. Simply insert the cable into the Dektight seal, tighten the dome nut and cable is
automatically fixed, centered, and sealed, saving you both time and money.
Dektight seals also have a buttress thread which allows for high torque without
stripping the threads or cracking the dome. The tapered ring seal eliminates Material: Polyamide
the need for a thread sealing ring.
Color: Gray
Dektight seals and lock nuts, available in a wide range of sizes, handle cable Available in Black. Add K1 to part number when ordering.
diameters from 0.177" to 1.732".
18 Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com
Series 071
Choose either rapid "pop-in" mounting (for both round and square holes), or
an adhesive mounting system (071-0103).
Max. Max.
✔ Simple Re-locking Part
Number
Dimensions (in.) Bundle
Dia
Panel
Depth
Feature B
A B C D E F (in.) (in.)
A C
✔
E
Two Mounting D
071-0101 5.00 .250 .575 .060 - - 1 3⁄16 ⁄16
1
Styles B F
071-0102 7.00 .250 .645 .060 - - 1 3⁄4 ⁄10
1
Resistant Nylon
Tyco Electronics Dek Cable Accessories toll free 800.323.1419 fax 919.557.8498 e-mail custserv@dekusa.com 19
8000 Purfoy Road
Printed in USA
Fuquay-Varina, North Carolina 27526
www.dekusa.com ©2003 1654800 C350.10/03