You are on page 1of 14

www.strobotix.

com

LIST FOR MECHANICAL PROJECTS

MATERIAL HANDLING
1. MOTORISED OBJECT LIFTING JACK : The object lifting Jack works with the help
of geared motors and worm gear arrangement to lift the objects. The modified version
can even lift car using the same principle
.
2. KEY CONTROLLED- FORK LIFTER: - This Fork lifter lift the floor items and
place at the required space as instructed by Key controls.

3. MATERIAL HANDLING (X, Y, Z MOTION CONTROL): - A switch controlled


material handling mechanical assembly that can pick or place the goods in all three axis
using three gear motors.

4. STEPPER MOTOR CONTROL WITH SELECTED STEPS FOR CONVEYOR


BELT: -An automatic system that moves the stepper motor for bottle vending /material
dispenser control system.

5. OBJECT REJECTION & COUNTING MACHINE: - A conveyor belt based project


that carries goods of different height or material. The object rejection setup removes the
item from the moving belt if it does not fulfill the condition
.
6. ROBOTIC ARM WITH GRIPPER: - A three-geared motor setup of robotic arm is an
interesting project under material handling. Six keys operation controls the whole setup
of the model.

7. PNEUMATIC/HYDRAULIC ROBO ARM: The air pressure is the base behind this to
move the arm to grip, to lift and to rotate the material to handle. A mini compressor will
create the air pressure
.
8. PNEUMATIC/HYDRAULIC CRANE: The air pressure is the base behind this to move
the arm to pick and to lift the material handling crane. A mini compressor will create the
air pressure.

9. PNEUMATIC/HYDRAULIC JACK: The air pressure will lift the material using a single
piston. The up/down valves will control the whole operation. A mini compressor will
create the air pressure.

10. ROBOTIC CRANE : A dual motor crane to lift material from ground level and and
place the material at the other side of it by a moving arm using other motor. One can put
the whole crane on a robotic vehicle with another two motors as moving crane for maetial
handling

Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road


Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

.
11. ROBOTIC TROLLEY FOR MATERIAL HANDLING: This trolley can be
implanted on rough surface to carry material and drop at a specific area.

12. AUTOMATIC STAMPING AND SORTING MACHINE FOR POST CARD: This
machine with a conveyor belt will check the four major cities and sort the post cards in
their corresponding boxes with auto stamped on it.

ALTERNATE ENERGY GENERATION

13. WIND MILL: The Actual wind mill model that produce electrical energy from wind and
charge the battery to run inverter directly.

14. SOLAR SUN SEEKER: - It actually track the sun as per its position and move the solar
cell/water heating plates accordingly so as to get maximum power from sun light.

15. THERMAL POWER PLANT USING STEAM: Steam energy is alternatively used to
generate electrical energy. A traditional arrangement commonly used by any thermal
plant but still very useful to display as teaching aid.

16. HYDEL POWER DAM: A Device SETUP that generate electrical energy from running
water. The model comprises a pump, a water reservoir, an alternator to gen. electrical
energy.

17. ELECTRICAL ENERGY FROM AMUSEMENT PARK RIDES (SEA-SAW,


SWING, SLIDE, ROLLER ETC.) : The different amusement rides can be designed to
generate electrical enegy while children are using actually the park.

18. ELECTRICAL ENERGY FROM SPEED BREAKER: This can be designed to


generate electrical energy when vehicles cross the breaker and roll the roller based speed
breakers connected with an alternator.

19. PADDLE CONTROLLED MOBILE CHARGER CUM EMERGENCY LIGHT: - It


works as we do cycling for exercise. Besides charging Mobile battery, it burns the extra
calories too. Further it can modified to churn any thing.

20. HYBRID CHIMNEY : The dual natural energy sources say Wind and Sun energy is
used to generate electrical energy. A good alternate source of energy for areas like deserts
or barren land, where sun light is available but low speed of wind flow is there.

21. SOLAR POWERED REFREGERATOR: Compressor less refrigerator to provide 12-


15 degree temperature while cooling and is also used to heat if required with the same
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

Thermo-EMF peltier junction based system works on 12V battery to be charged with
Solar Cells/ Panel.

22. ELECTRICAL ENERGY FROM COMPRESSED AIR- This ‘AIR GENERATOR’


generate electrical energy from the air stored in a storage chamber using suitable air
compressor.

23. ELECTRICITY FROM D.J. DANCE FLOOR: An alternate source or energy can be
generated by the modified dance floor using pressure sensor based electricity generators.

24. WIND BELT: Another alternate energy generation to charge battery by low power wind,
say simple fan etc. A moving belt vibrate when wind strike it from any side.The magnets
on both ends make the generation of electrical energy .

ROBOTIC VEHICLES AND RELATED PROJECTS


25. ROBOTIC CAR WITH SENSORS: - This is a simple geared motorized vehicle with
free wheel at front will always take right turn when the Infrared sensors sense any
obstacle in front. An emergency brake can be applied if required.

26. JOY STICK CONTROLLED ROBOTIC CRANE WITH UP/DOWN PULLEY


ARRANGEMENT AND CIRCULAR MOTION: - This is an interesting project in the
field of material handling. A moving trolley carries a circular disc type-rotating platform
with crane arm. It moves all 360 degree.

27. LINE TRACER INDUSTRIAL VEHICLE: A material handling vehicle to carry goods
in industry and that follow black line to follow. Any obstacle in front will stop the vehicle
to avoid any accident by using IR or ultrasonic sensors.

28. ROBOTIC RADAR SYSTEM: - This robotic radar moves 180 degree carries an IR or
light sensor fires with an electromechanical Gun if finds some object.

29. ROBOTIC FIRE BRIGADE TROLLEY: - This robotic motorized trolley carries with
water tank with it and work automatically if finds the fine in its route.

30. ROBOTIC LIFT/ ESCALATOR: - This electromechanically System control the model
with keys operation for its clockwise and anticlock movement. It may also controlled
automatically with human sensor to save energy.

OTHER PROJECTS
31. LOCOMOTIVE COACH CLEANER: - The model shows how the locomotives can be
washed from both sides using brush arrangement with motors.

32. EXERCISE/PYSCIOTHEREPY MACHINES: - Numerous types of machines can be


Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

made under this topic with automation.

33. GAS BURNER TYPE WATER HEATER: The modified arrangement ot heat water
with burner and gas cylinder. It saves 25 to 30% of LPG gas in comparison to ordinary
gas stove to heat water.

34. COMPRESSOR LESS THERMO-EMF REFRIGERATOR: The fibre made box is


being modified as simple compressor less refrigerator to provide 12-15 degree
temperature while cooling and is also used to heat if required with the same Thermo-
EMF peltier junction based system.

35. DEEP FREEZER USING COMPRESSOR: A simple compressor based food stuff
storage system with the top opening glass lid. The project shows the use of compressor
in practical shape with voltmeter, ampere meter at display.

36. COOLING TOWER: The multi layer cooling tower will cool the liquid or water with
the help of water pump.

37. COMPRESSOR BASED SPRAY GUN: The mini electric compressor is used to spray
the water colours.

38. PAPER SHREDDING MACHINE: The project will cut the papers in small pieces to
make the use for packing etc.

39. SUN BLIND CONTROL: - It control the movement of sun shade as per Sun light
falling on the window.

40. HEAT EXCHANGER-PIPES: The smart cooling system to cool the heat effected area
required continuous cooling as on CPU of systems or machines that radiates heat.

41. ANALYSIS OF RECTANGULAR /TRIANGULAR FINS IN HEAT EXCHANGE


MACHANISM: An arrangement will help to study the heat exchange efficiency using
different types of fins in a rectangular heat pipe.

42. MOTORISED ELECTRIC AIR COMPRESSOR: The motorized arrangement with


air pump to store air to be required later.

43. ENGINE BASED AIR COMPRESSOR: A 12000 rpm 2.5 CC or 3.2 CC diesel engine
work on the mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will
create a sufficient air pressure to show the working.

44. 360 MOTION AIR FLOW COOLER WITH DUAL SIDE AIR FLOW: A smart
cooler with moving blower that circulated the air in all 360 degree of motion all around.
45. DOOR OPENER: - Automatic gate/Door opener that sense the human presence and
open the door with mechanical motorized arrangement.
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

46. MOVING BRIDGE: The geared motor arrangement to lift the bridge on river in case of
free movement of Ships/Boats required.

47. CURTAIN MOVER: - A mechanical arrangement with optional battery operated


sutomatic remote controlled curtain movers. Useful for stage show etc.

1. SOLENOID BASED HAMMER: A electro-mechanical arrangement with IR sensor in


front to drill any hard surface area using solenoid coil arrangement.

2. TORQUE TESTING DEVICE: The device comprises a moving wheel with motor and
an arrangement to check the torque of that motor to carry the weight etc.

3. LIQUID DISPENSER MACHINE (WITH AIR CONTROL SYSTEM): The timer


operated arrangement can be used to dispense liquid from the source to fill any liquid say
milk/juice/petrol etc. This can be displayed using conveyor belt system to make the
model more presentable.

4. AIR COMPRESSED SPRAY GUN (WITH ELECTRIC AIR PUMP): The air pump
controlled spray gun for minor paint jobs normally required by automobile workshops or
artists.

5. LATHE TOOL PRESSURE DYNAMOMETER: A microcontroller based project is to


calculate the pressure formed at the tip of lathe tool so that one must sure that

6. SOLENOID BASED DRILLING /PUNCHING MACHINE WITH AUTOMATIC


TIMER BASED/IR SENSOR: The good project for automation in mechanical using a
drilling or punching system that operates automatically when object or work piece is
placed under this.

7. SUN TRAKKING WATER HEATER WITH MECH. PROCESS (WATER DROP


ETC.) A unique system that uses water itself to get maximum energy to heat water from
sun energy. The concept is to tap sun energy by means of sun tracking system. Also
known as Solar Oven
.
8. DRINKING WATER FROM OCEAN WATER: An arrangement to convert sea water
into drinkable water with high speed evaporation and cooling & condensation process.

9. TEST-TUBE VIBRATING MACHINE WITH DUAL CONTROL- The arrangement


allows the bottles placed in a chamber to rotate with different angle and at different speed
to mix the setup.

10. AUTOMATIC VENTILATOR FOR WINDOWS PANELS: The mechanical


arrangement open the ventilators automatically when it sensor more heat or humidity in a
closed area.
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

11. LATH MACHINE CONTROLLER: A digital arrangement to move two motors


automatically to complete a process job with a specified speed and time frame.

12. AC COIL CLEANING SYSTEM : Project will ease the process of cleaning for coils or
similar system normally used in AC plants or even wire mesh in chimneys.

13. MOTORISED WHEEL CHAIR: The useful device for handicapped person to mive the
chair with the help of battery and motor arrangement. The keys will help to turn left or
right side.

14. ENGINE BASED GENERATOR : A 2.5 CC or 3.2 CC diesel engine work on the mix
blend of Kerosene, Ether Solvent and Castor Oil with manual start will charge the battery
or directly run small current operated devices.

15. PADDLE CONTROLLED DOOR OPENING SYSTEM: A very good project for
security persons to open or close the barrier or iron grill gates using paddle system.

16. ACCIDENTAL PROOF TRAINS USING RF SIGNALS : The automatic braking


system that makes an emergency brakes if two trains are coming on the same track. The
model showing with one static and one moving train on a track.

17. HEART BEAT PULSE PLOTTER MACHINE : This will draw the pulses from heart
using a finger sensor and will put on paper with the help of solenoid coil assembly.

18. LAPPING MACHINE: Lapping is an abrading process that is used to produce


geometrically true surfaces, correct minor surface imperfections, improve dimensional
accuracy , or provide a very close fit close between two contact surfaces.

19. MAGNETIC LEVITATION PLATEFORM: (A) A permanent magnet parallel rails


pulls up the small platform upward and a electromagnetic system pushes the same from
one end to other.(B) Same rail and platform system as above with a dc motor propeller
system to run the car.

20. MOVING ESCALATORS: The moving arrangement of stairs to move persons from
one floor to another by using IR sensor to detect human presence to save energy.

21. AUTOMATIC MOPPING MACHINE: The sensor based mopping machine will
change the path automatically and runs in a room to clean the floor area.

22. AUTOMATIC MILLING MACHINE: The three/two axis motor control system to be
run automatically with a digital circuit.

23. PCB FABRICATION: Every electronic workbench needs a PCB (PRINTED CIRCUIT
BOARD) to be fabricated to make any electronic circuit.
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

24. UNMANNED RAILWAY CROSSING : A crossing barrier gates will automatically


close doun mechanically when it sense the train is coming and open it after the train
crosses the barrier gate at unmanned crossing area to prevent accident.
25. AUTOMATIC PAPER LIFTING AND STAMPING MACHINE:
26. EARTH MOVERS:
27. TOFFEE/PACKET VENDING MACHINE: - An automatic coin vending machine
that give you a packet (say Matchbox) or Toffee when you insert a 1 rupee coin in it. This
is a timer based motorized Mechanical arrangement.
PROJECTS IN AUTOMOBILE/TRANSPORT
MECHANICAL:

1. REGENERATIVE BRAKING SYSTEM: - The system will generate electrical energy


while the wheel is about is stop when applying brakes. The model comprises a moving
wheel arrangement with induction braking system that create regeneration of electrical
energy to charge the battery again to save energy about 20%.

2. INDUCTION BRAKING: An alternate Electomagnetic braking arrangement to stop the


vehicle without wear n tear of shoe brakes. It can be used by Industries to stop machines
using this SWITCH BRAKES.

3. ANTI LOCK SENSOTRONIC BRAKING SYSTEM: The concept behind this project
is to demonstrate the wheel braking by electronic system with change in brake timing
using simple shoe brake.

4. PROPELLER BASED FORMULA CAR: A 2.5 CC or 3.2 CC diesel engine work on


the mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will rotate the
propeller blade in front of car and the air pressure provides the power to run this Formula
Car . An RF remote control unit can be used to provide direction on either side.

5. DIESEL ENGINE BASED CLUCH CONTROLLED CAR:


A 2.5 CC or 3.2 CC diesel engine work on the mix blend of Kerosene, Ether Solvent and
Castor Oil with manual start will rotate provides the power to run this Car . A clutch
arrangement operates on RF link will control the whole assembly for speed and direction
on either side.

6. DIESEL ENGINE LOCOMOTIVE MODEL: A 2.5 CC or 3.2 CC diesel engine work


on the mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will rotate
the gears assembly that provides the power to run this Locomotive engine. The whole
structure can be placed on rail tracks.

7. PROPELLER/MOTORISED MONO RAIL: This simple propeller based vehicle will


run on the principle of air propel ion. The speed of vehicle is directly propotional to the
speed of propeller blades.
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

8. PNEMATIC TRANSPORT SYSTEM: An Age old technique can be used again to


transport the low weight material from one place to another in industries.

9. HYDRAULIC BREAKES: - A same mech. System that uses fluid as pressure to move
the brake shoes in moving wheels for braking systems.

10. HYBRID CAR – ENGINE AND DC MOTOR OPERATED DUAL POWER CAR:
A 2.5 CC or 3.2 CC diesel engine work on the mix blend of Kerosene, Ether Solvent and
Castor Oil with manual start will rotate the propeller blade in front of car and the air
pressure provides the power to run this Formula Car .The solar cells on the top provide
additional power to charge battery and it will also run the car to save fuel. An RF remote
control unit can be used to provide direction on either side.

11. WIRELESS TYRE PRESSURE GAUGE: The microcontroller based project send the
data from tube/tyre rim to the dash board for the pressure of each tube. One can read at
the attached LCD on the project.

12. DRIVER LESS CAR: The three wheeler car that sense the path at its own (or follow
black line at the surface). It will aply brakes in someone comes in front of it or change the
path left or right as per requirement.

13. HYDRAULIC BRAKING SYSTEM FOR CAR/IND. APPLICATION : The paddle


operated or IR sensor operated hydraulic braking system with piston and oil chamber
connected to a motorized rotating wheel.

14. STEERING CONROLLED HEADLIGHT: The four wheeler usually find difficulty to
drive in hills specially at sharp turns. The model help them to change the focus of
headlight as the steering moves on either direction.

15. ENGINE/MOTOR VIBRATION CHECKER: The microcontroller based setup reads


the vibration of engine or motor. This helps to tune the engine to get maximum efficiency
with fuel savings.

16. IR AUTO BRAKING: A simple auto braking in material handling robot that stops
automatically when the obstracle comes in between. It create a switch, induction or
paddle brake to apply to stop the vehicle.

17. SEAT BELT AUTOMATIC: - An innovative idea to automat the seat belt locking
system using motor with parallel gear arrangement with timer circuit. The arrangement
itself attached inside the car to provide the facility.

Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road


Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

18. ACTUAL CAR LIFTING JACK: A MOTORISED JACK: It actually lift the car
using its own car battery as power source.

19. ELECTROMAGNETIC SHOCK ABSORBER: A modified shock absorber that


activates automatically when it sense the pothholes on the road. It comprises road sensors
that provide instant response to act while driving.

20. STEERING BY WIRE : A DC geared motorized arrangement to replace existing


steering system by switch arrangement.

21. HYDRAULIC /COMPRESSED AIR BASED LIFTING JACK: An air engine


provide pressure to uplift the jack comprises piston filled with oil.

22. HOOVER CRAFT USING ENGINE: A 2.5 CC or 3.2 CC diesel engine work on the
mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will rotate the
propeller blade and the air pressure provides the power to run the Hoover Craft. An RF
remote control unit can be used to provide direction on either side.

23. AIR PROPELLED MOTOR BOAT: A DC motor operated boat operates on propeller
blade and the air pressure provides the power to run the boat. An RF remote control unit
can be used to provide direction on either side.

24. AMPHIBEAN ROBOTIC CAR: The Air propelled or water propelled boat cum car
that runs on water and surface both. The RF modules can be placed to control the same
remotely.

25. MICROCONTROLLER AT-89C51 BASED AUTO GEAR SHIFTING SYSTEM:


The circuit shows the demo of auto shifting of gears using stepper motor with the change
in speed of vehicle. One can change the speed of DC motor as actual vehicle running
wheel

26. MICROCONTROLLER AT-89C51 BASED AUTO SPEED LIMITER WITH


AUTO BREAKING: The project is to read the rpm of a automobile and according to
that it limits the speed as Speed Governor. One can change the speed with variable
control.
27. DIGITAL AUTO SPEED LIMITER: For limit the speed suto.. if a school or
hospital comes in way.

28. ELECTROMACHANICAL BRAKE : A moving wheel with permanent magnets will


change the flux at the outer ring. The electromagnets can produce electrical energy to
charge battery or can be used to make brake on that wheel.

29. SOLAR TRICYCLE FOR KIDS: It runs on DC motor placed under the seat with chain
drive. The mains operated charger with Solar power charging option is an added
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

attraction of this model.

30. SOLAR TOY CAR: -The solar panel charge the battery. From this rechargeable battery
a dc geared motor drive the mini toy car. RF remote operation for steering control is also
an optional attachment.

31. COLLAPSIBLE STEERING MACHANISM: The model shows the basics of Steering
system with collapsible mechanism. The project consist of two front wheels with steering
system and an attachment for collapsible parts in case of frontal accident.

32. HYBRID MOTORBIKE: The ordinary bike can be converted into HYBRID vehicle as
the bike battery will provide power as alternative source when it get fully charged.
33. FOUR WHEEL STEERING SYSTEM: The driving on the hills will get more easy
with this mechanism.

34. CONTINEOUS VARIABLE TRANSMISSION: A new technique to run a vehicle


without using clutch to change the speed in continuous mode.

35. ELECTROMAGNETIC BRAKE USING BRAKE SHOE: The electromaganet will


expand the brake shoes to activate the braking machanism. More the current ,
Easy to brake.

36. DISC OR CLUCTH BRAKE SYSTEM IN AUTOMOBILES:

PC BASED MECHANICAL PROJECTS


.
37. PC BASED IC-INTERNAL COMBUSTION ENGINE: An animated software project
shows the working of combustion engine and the hardware connected will actually shows
the rpm of engine.

38. PC BASED SEWER LINE CLEANING ROBOT: It’s a 3d moving circular cleaner
that rotates and clean the inner surfaces of sewer pipes and communicate with PC of its
presence etc.

39. PC BASED ROBOTIC TROLLEY: - A single/double stepper motor based trolley with
an additional MOTOR will run in straight direction to load/unload the material handling.
One can select the stoppage as per requirement and it automatically return back if
obstruction comes into the path.

40. PC BASED LIFT/ELEVATOR CONTROLLER: - A useful project for all multistory


building to monitor lift operation and control both from lift switches and computer
keyboard. The PC screen will show the graphical representation of the lift up/down
movement. Operates with single stepper Or geared motor control.

Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road


Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

41. PC BASED DISTANCE MEASUREMENT ROBOT: - The IR based robotic trolley


with to and fro movement can travel in a straight pipe to measure the distance traveled till
the obstruction come.

42. PC BASED LATH MACHINE CONTROL: - A CNC machine control system to


operate two stepper motors in a desired mode to cut works a work piece in specific shape
and size.

43. PC BASED AUTO BRAKING SYSTEM: - A unique project for automobiles/vehicles


that sense the rpm of the engine and automatically apply the brakes if speed exceeds the
specified limit.

44. PC BASED FORK LIFTER: - This Fork lifter lift the floor items and place at the
required space as instructed by the computer using stepper motor
45. PC BASED EARTHQUAKE PROOF BUILDING: - The center of gravity of a
building can be motorized controlled by a moving weights placed on the rooftop. The PC
will sense the earthquake and weight move accordingly.

46. PC BASED STICKER/PAPER CUTTING MACHINE: - This PC based parallel port


interfaced cutter and motor control circuit will cut the paper or sticker according to one’s
requirement.

47. PC BASED THREAD/COIL WINDING MACHINE: - This PC based automatic


thread winding machine needs the no of turns required as input. The cutters will
automatically cut after the desired output

48. PC BASED CONTINEOUS WELDING VEHICLE: An GV(Automatic guided


Vehicle) controlled with computer will follow the routes specified once using keyboard
and further it will follow the same to work as contineous welding vehicle or Fire brigade
vehicle or material handling vehicle to drop things.

49. PC BASED DIE CUTTING: - A CNC based automatic system controlled with digital
circuit or PC controlled that operates two motors to do the job for up/doun of the tool and
movement of the base sheet to cut.

50. PC BASED HELICOPTER CONTROL: - This PC based system control the top fan
and tail fan with balance movement when you would like to

51. PC BASED JOINT ASSEMBLY PROJECT: - A mechanical graphic project to plot


two type of joint viz. cotter & knuckle. The hardware assembly can be connected as per
requirement.

52. PC BASED AUTO PACKET VENDING MACHINE: The packets/juice cans or any
other items can be vend by putting password in the computer.

Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road


Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

53. PC BASED ROBOTIC SWEEPER: The PC controlled sweeper will perform the job as
per schedule and the area /route defined.

54. PC BASED ATM MACHINE: One can open the account and get the hard money in the
shape of coins.

55. PC BASED PROGRAMMABLE PAINT MACHINE: - A PC based Programmable


paint machine is CNC type system that completes its work as shedule task given.

56. PC BASED CAR PARKING MONITOR: - A 20 cars parking monitor cum control
system that check and enter the time and registration no. of each can while entry and exit
with IR/LASER sensors at gate. Parking full indication

57. PC/MECHINICAL BASED TIME OPERATED FOIL BENDING / DONA


MAKING MACHINE: The stepper motorized based system that manufacture/process
time operated system like bending machine.

58. PC BASED 3D XYZ AXIS MOTOR (MATRIX) CONTROL: - (a) The two stepper
motors can be controlled jointly with the single command operation to operate two XY
Axis motions to form a matrix at PC screen and a geared motor can be manually operated
to lift or release the material picked by hook or electromagnet.

59. PC BASED SCREW/DRILL SYSTEM: - This two stepper motor controlled system
either use to screw with the moving bolt jack arrangement or it can be used to drill up to
desired depth at a specific space.

60. PC BASED HEIGHT MEASUREMENT TOOL: - A rotating disk operated with


stepper motor stops at every 180 degree and read the height of the present

61. Tidal Wave Harvesting Mechanism


62. 2. 90degrees turning robot
63. 3. Shrimp (stair climbing rover)
64. 4. Generation of Magnetic deflection from 15000rpm running copper rods
65. 5. Drill Tool Dynamo-meter
66. (for measuring downward force and rotating torque on a job under drill)
67. 6. Paddle Operated Washing Machine
68. 7. Unidirectional Shaft Rotation Mechanism from bidirectional fluctuating motion
69. 8. Automatic gear changer
70. 9. Automatic gear display
71. 10. AUTOMATIC MOTOR COIL WINDING SYSTEM USING MICROCONROLLER
72. 11. Automatic Poor Quality Rejecter
73. 12. Automatic Quality Checking System
74. 13. Automatic Sealing Machine
75. 14. Battery Operated Portable Pump
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

76. 15. CIRCULAR CUTTING MACHINE


77. 16. CNC BAR FEEDING MACHINE
78. 17. COIR MAKING MACHINE
79. 18. Conveyer for Quality control
80. 19. Electrical Comparator With Digital Display
81. 20. Electrical Spot Welding Machine
82. 21. Electrified Two Axis Sliding Table
83. 22. Electromagnetic Breaking System
84. 23. Electronic Power Steering
85. 24. Electronic Wise
86. 25. Emergency Breaking System
87. 26. Energy Efficient Conveyor with Auto Dimensioning Mechanism
88. Fabrication Of Hydraulic Or Pneumatic Vice
89. Fabrication Of Pneumatic Pick And Place Robo
90. Fabrication of Solid Fuel Fabrication machine
91. Fabrication of Windmill Power Generator
92. Foot Step Pressure Electrical Power Generator
93. Frictionless Electromagnetic Breaking System
94. Glass Cutting Machine
95. High Speed Material Transferring Robo
96. Hydraulic Noodles Machine
97. Jigs and Fixture
98. Material handling system
99. Micro hole drilling machine
100. Mini milling machine
101. Motorized jack
102. Multi purpose magnetic locker system
103. Multipurpose Tool Changer
104. Pneumatic hag saw cutter
105. Over Load Indicator for machines
106. Peddling Washing Machine
107. Peddling pump
108. Pneumatic Hand Grinder
109. Pneumatic Punch
110. Pneumatic Comparator
111. Automatic PNEUMATIC DOOR OPENER
112. Power generation using Footsteps
113. Power generation using Speed breaker
114. Rain activated wiper
115. Remote Controlled Screw jack
116. Remote Operated Wireless Crane Control System
117. Safety Locking System
118. Salt water into pure water
119. Sheet Metal Bend removing Machine
120. Soft hand gear system
Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road
Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building
www.strobotix.com

121. Solar Energy Power Sprayer


122. Solar Panel Tracking System Mechanism
123. Thermocoal cutting machine using CNC
124. Tidal Power Plant
125. Utilization of Used Air in Cylinder or Pneumatic Air Saver
126. Vertical Axis Windmill
127. Fabrication Hydraulic press
128. Fabrication Hydraulic bending
129. Fabrication Hydraulic forklift
130. Fabrication of Spy robo
131. Fabrication of voice operated wheel chair
132. Fabrication of pedaling compressor
133. Fabrication of auto feed drilling machine
134. Food process control station
135. Automatic ration system
136. Library automation system
137. Motorized wheel chair
138. Programmable Pick and place robo
139. Pneumatic bearing press
140. Computerized boiler automation plant
141. Blind guiding robo
142. Fuel vending machine
143. Automatic store management system
144. Mechanized Physiotherapy
145. Automatic pollution control system
146. Milk packing machine
147. Intelligent Electronic breaking for vehicles
148. Auto Drain Valve With Air Drier for Compressor
149. Auto side stand indicator and center stand
150. Auto hammer striker
151. AUTOMATIC LUBRICATING MACHINE
152. AUTOMATIC DISC PARKING SYSTEM
153. AUTOMATIC DRILLING AND TAPPING MACHINE
154. Automatic Dimensioning Machine

Tejinder Devgon 9988218770 Sec- 41 B , Chandigarh , Shivalik Public School Road


Sakshi Rana 9888091747 Building No.-135/5 , Near Cheema Complex
0172-2636402 Road Side Building

You might also like