Professional Documents
Culture Documents
1
III B.Tech I Semester Supplimentary Examinations, February 2008
MACHINE TOOLS
(Mechatronics)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) What is tool life? What is the significance of tool life to an engineer who is
interested in productivity?
(b) Define machinability index. What are the variables affecting machinability?
[8+8]
2. (a) What are the four major parts of a carriage? Describe them briefly.
(b) How the size of a turret lathe is specified?
(c) Determine the angle of taper, given the larger diameter as 50mm, small diam-
eter 35mm and length of the work piece 60 mm. [8+3+5]
3. (a) Draw the block diagram of a horizontal shaper and write about its important
parts.
(b) What are the main operations performed on a planer? [10+6]
4. (a) What are the various parts of boring mill? Explain them briefly.
(b) Define the following angles of a twist drill: [8+8]
i. Rake angle
ii. Lip clearance angle
iii. Point angle
iv. Chisel edge angle.
5. (a) With the help of neat diagrams describe the working of the following milling
attachments:
i. Knee
ii. Spindle nose
iii. Arbor.
(b) Explain the difference between straight and helical slab mills bringing out the
advantages to be gained by the use of helical teeth.
(c) What is feed on a milling machine? [9+5+2]
1 of 2
Code No: R05311404 Set No. 1
8. (a) What are the various types of jigs? Explain the applications of each type.
(b) What are the important principles of location? [10+6]
⋆⋆⋆⋆⋆
2 of 2
Code No: R05311404 Set No. 2
III B.Tech I Semester Supplimentary Examinations, February 2008
MACHINE TOOLS
(Mechatronics)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
⋆⋆⋆⋆⋆
1 of 1
Code No: R05311404 Set No. 3
III B.Tech I Semester Supplimentary Examinations, February 2008
MACHINE TOOLS
(Mechatronics)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) What is tool life? What is the significance of tool life to an engineer who is
interested in productivity?
(b) Define machinability index. What are the variables affecting machinability?
[8+8]
2. (a) Name any three lathe accessories and explain their functions.
(b) Enumerate the applications of capstan lathe and turret lathe. [8+8]
4. (a) Sketch and explain the various types of tools used on boring machines.
(b) Describe the procedure of boring on Vertical boring machine. [10+6]
5. (a) What are the various cutter holding devices used on a milling machine?
(b) Draw a neat sketch of a column and knee type horizontal milling machine and
explain its working. [6+10]
6. (a) What is the marking system followed in case of grinding wheels? Explain
the individual elements of the marking system from the standpoint of the
functioning of the wheel.
(b) What are the advantages and limitations of using centreless grinding? [10+6]
8. (a) Which system is the most basic and elementary form of modular fixtures?
Explain briefly.
(b) Discuss the 3-2-1 principle of location.
(c) Explain the various safety factors to be considered while designing the Jigs
and Fixtures. [6+4+6]
⋆⋆⋆⋆⋆
1 of 1
Code No: R05311404 Set No. 4
III B.Tech I Semester Supplimentary Examinations, February 2008
MACHINE TOOLS
(Mechatronics)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
⋆⋆⋆⋆⋆
1 of 1