Tea Bag Wallet
Fabrics
You need four 4x4’ pieces of fabric.
Won-on \aterSadng,
Outsides
the fabric 'S not fairly str Use an iron-on interfacing on the vurong Side oF
‘ihe piece you will use for the outside of your tea bag wallet. Otherwise, you
can Just go with the fabric Hself: I've usedt cotton oF thinly quitted fabric for the
outside. Bo not use quilted Fabric For all the layers or tt will become too bully,
insides
~Fold-two lengits of Fabric for the pockets and iron them lengthwise.
Now lay the Piece of fabric you are using for the inside of the wallet
face-u9 in front of you.
Measure up | inch from the bottom of the fabric. Place the bottom topen Side) of the
First pocket length I" up from the bottom of the wallet inside piece and pin in place.
Sew
long the bottom of #, across the length.
Take “he Second pocket length and pin tt across the bottom ofthe wallet. Sew along
the
bottom of tt, % ' in from the edge.
Marthe certter with chalk Sew up from the bottom only to the top Pocket edge.
ORS
aes
Ne 7]
Closures
Toke a +’ piece of 4 inch wide ribbon. Fold # in half and pin ttto the center of your
Pockets and interior fabric onthe left hand side, loop facing the riget.www quinceberry blogspot.com
Assembling?
~Pin outside to inside. Make Sure if pattern has atop of bottom, tts assembled
correctly, Sew Sides and top together wtth 14" Seam. Clip corners andtturn. Press.
“Turn bottom seam into close. Pin, Top sttich along bottom edge. Top stttch along top.
edge.
Button®
‘To attach button, lay ribbon across tea bag wallet. Place button under ribbon to
estimate placememt. Put one Finger inside the innermost Pocket So that you don't sew tt
down while affiting, a
Analthat's ttl! HF you make these, please Send me a Vink with photos. I'd love +o see
them! You can also make them a little bigger to hold creat cara .