Professional Documents
Culture Documents
Ans.
Central instance have message server and dialog, update, spool, enque, gateway,
background work processes.
Application server has only Dialog, update, spool, gateway and Background
workprocess.
Note: SAP server has only one message server and Enque server.
Ans.
Q. What are the prerequisites for applying a support pack? What is the Procedure for
applying support packs?
Go to Transaction SAPM.
From the menu support packages - > load package -> from Front End..
Then Select display button in the screen and select the patch and gives import.
Take care that no users are in online while u upload the support packages.
Q. Auto Start SAP on Windows Instance
Use transaction RZ10 to edit your startup profile. Add the following entry:
* Autostart = 1
Then save the profile. Next time your server reboots, your SAP instance will come up
automatically!
Then Select that Note goto Menu SAPNote -> implement Note.
Q. How to lock SAP Client? Is there any Tcode to lock the particular Client…?
1. Once the Linux OS is over u configure the network card and change the Host name .
5. Before install oracle u have to change the parameters in limits.conf. (Installation guide
for oracle in linux is available from oracle site)
7. In the 3rd phase it will ask u to create user for oracle (user should be
ora<ianstancename>). Suppose if u r going to install oracle in middle of sapinstallation
only.
Q. STAT, STAD and ST03N tcode is showing error “RFC error, No performance data
collected”.
Q. What is the difference between client 000 & 001? Why we use client 000 for client
copy, why don’t 001?
000 client is standard client and contain client independent setting. 000 client contain
simple organizational structure of test company and include all parameter for application,
standard setting
001 client is copy of 000 client. It is reserve for the activity for preparing the system for
production system.
Q. Which are the default SAP background jobs run for Basis data?
SAP_REORG_JOBS
SAP_REORG_SPOOL
SAP_REORG_BATCHINPUT
SAP_REORG_ABAPDUMPS
SAP_COLLECTOR_FOR_JOBSTATISTIC
SAP_COLLECTOR_FOR_PERFMONITOR
RSPO1043
Q. What are Homogenous system copy and Heterogeneous system copy and how you
will do that?
Q. What is SAPS?
The SAP Application Performance Standard (SAPS) is a hardware-independent unit that
describes the performance of a system configuration in the SAP environment.
Q. Which table space, gets filled frequently and we add datafile to that?
Q. What is SAP NETWEAVER, SAP XI, SAP BIW, SAP WAS and SAP BI.
2. BI: It is an OLAP (on line analytical processing), which provides a plate form to
collect the data and user extract the data from BI or BW (older version) to analyze it
3. EP: Enterprise portal provides web based secure access to all the application, services
and information. you can log in to EP using host name:port#/ <service name> and user
name and password
5. Web AS: Web Application Server is the platform for ABAP and J2EE stacks in
Netweaver.
1. What has changed since the performance is poor?
*
o System Parameter Changes (RZ10)?
o Increase in the number of users?
o Kernel patch?
o Support Packages?
o Linux and Oracle patches?
o Hardware Changes?
3. Places to look:
4. ST05: If the database times are high, you should generate an SQL trace of the
affected transactions to find out whether the database access is carried out in a useful
way.
5. Click on the first number under the Rows – Chg/Month header and click the
Sort button.
6. The sorted results shows the top tables when it comes to rows changes per
month. These tables are your “database hogs”.
Performance Standards:
Database Standards:
Changes – < 25 ms
Locked tasks
Whether you are trying to start a brand new SAP instance, or an old one, there are some
very specific places to look for information.
If this is a brand new SAP instance, and the installation completed 100% successfully,
you know that the instance itself must be viable. If your installaion was never able to
complete due to the instance not being able to start up, the issue is probably due to lack of
resources. Use the sapinst directory to search the installation logs and find your problem.
Sort them with “ls – ltr” is see the list sorted in descending order for the ease of viewing.
If you have a test searching tool, look for “error” in all files with the suffix “.log”.
If your SAP instance has been up and running fine for a good while, then something has
probably changed that makes it not come up.
· is your memory so fragmented that it can’t get enough primary space to start the
instance?
To investigate an unsuccessful start up, look at the logs in the /home/<sid>adm directory.
Sort them with “ls – ltr” is see the list sorted in descending order for the ease of viewing.
How often have you seen a posted message saying “I have searched through SAP Notes
and can find nothing related to this matter.”? And how often have you gone to SAP
Marketplace and done a search yourself and found a hit? If we only had a had a nickle…
Searching SAP Notes (formerly known as OSS notes) is a science as well as an art. Lets
use this error message as an example:
First, you should search the specific error message “BR602W No valid SAP license
found”. If you get at least one hit, you should read the SAP Note even if it didn’t look as
if it pertained 100%. Why? Because it might contain information leading to other notes
that did pertain, or give you new ideas for more search terms to help narrow the scope of
my query.
If you didn’t find a note that matched the problem, you could make your next search a
little less specifc, like “brbackup No valid SAP license found”. First you could search for
the phrase, and if you had no luck, you could search for all words. And if that produced
nothing tangible, you could make it even less specific as in “brbackup SAP license error”
or “SAP license error”.
Normally a very specific query will get you the results you need. But sometimes things
get lost in translation. For example, you are applying support packages and get an import
error with the following message “Panic! Panic! Panic! there’s no object header”. Since
we speak English and we realize that the SAP product was designed and implemented in
Germany, we have to guess that the English word “Panic!” somehow was translated from
the German word “Warning!” and that we can temporarily delay a panick attack until we
can research the error. Moral of the story? Realize that some things just don’t translate
correctly from language to language, and search accordingly. If you searched for “Panic!
Panic! Panic!” and got no hits, you could try “warning message no object header”.
Last, and not least, read and become familiar with your SAP Notes. There are certain
notes that you pull over and over again due to some task that needs fresh, current and
precise information. These are mostly lists of supported printer devices, known problems
with applying patches, etc.
· Is the user using a version of SAPGui that is too old for his workstation?
· Is the user using a version of SAPGui that is not certified for his operating system?
· Can a different user reproduce the same error on the same workstation?
· Are there any SAPGui patches that have not been applied?
Most SAPGui problems can be solved by either a) deleting and reinstalling SAPGui on
the workstation, or b) deleting and installing a newer version of SAPGui.
Make sure that these lines were added to the services file on the user’s workstation:
After you have successfully configured your SAPGui, add these three lines to the bottom
of your \Windows\system32\drivers\etc\services file:
sapdp00 3200/tcp
sapmsR3I 3600/tcp
If you have SAP Instances using System Numbers other than 00, you will have to add
their equivalents to the services file as well. Also, check if you are having connection
problems due to firewall restrictions. And, be sure that your Insert Key is set so that you
can type your password in properly – you can delete whatever is in the password field in
order to enter your password.
If you have never tested connectivity to a SAP instance on the workstation having the
connection problem, first you need to make sure that the workstation can connect to the
SAP server in some non-SAPGui way. Let’s say your user us trying to connect to
System ID (SID) DEV, System Number 00, and IP address 10.1.10.11. Open a DOS-
Windows and type this:
If the screen rolls and goes totally blank then your dispatcher is reachable. You can close
the DOS session. If your window never goes completely blank and you set a “Connecting
To 10.1.10.11… Could not open connection to the host, on port 3200: Connect failed”
error message right under the command you entered, the dispatcher is not reachable.
Also, make sure the \Windows\system32\drivers\etc\hosts file on the workstation is
correct.
For information regarding operating system, resource, and hardware requirements for
running SAPGui, see SAP Note 26417 -SAP GUI Resources: Hardware and software.
If CUA stops sending changes from DEV to QAS or PRD, something in the RFC setup
has changed. Either the password or the user type for RFC_USER was changed, or the
SM59 RFC connection to was changed and is no longer working.
Use SCUL in DEV in your DEV CUA parent to list the errors that are occurring. Look
for the user you tried to transport but could not. You might see “You are not authorized
to change users in group” or “No authorization for group users in role”. This does not
mean that YOU are not authorized, it means that the RFC_USER doing the ALE
communication between the SAP systems is not authorized.
First, reset the RFC_USER password in DEV, QAS, and PRD. And make sure that the
user type is Communication and not dialog. Now go to sm59 and do remote logins using
the QAS RFC connections. If they work (ie nothing seems to happen after you click the
remote logon button) everything should now be fixed. If you get a logon screen for QAS,
change the password in the sm59 screen to the same password you changed RFC_USER
to in DEV and QAS.
Retry your user change. If it still doesn’t go to QAS, maybe the QAS system is hosed
and down.
Step by Step Procedure to create a copy of a client locally in the same SAP server.
3. Go to change mode
4. Create a new client, assign client number & description as per request
8. Give reference client for copy and profile as per the request
1. Master data can not be copied without copying transactional data and transactional
data can not be copied without copying master data.
2. Application data (transactional and master) should not be copied without copying
configuration data.
3. Client copy requires a valid client as the destination client. Make sure that the
client exists in T000 table and you can logon to that client.
4. The transport system and the transport management system of 4.0 are the only
proper tool to be use to keep multiple systems in sync by transporting development and
customizing changes to another instance.
5. When you copy a client from one system to another, client-independent tables
should only be copied if they are not yet modified in the target system.
6. We recommend the users to read all the OSS notes regarding client copy that
applies to their SAP release. It is always better to schedule the client copy job in the
background for the night run when normal work is not taking place.
8. To avoid data inconsistencies all the users working in the source and target clients
should logoff from the system.
9. RSCLICHK program should be run in the target system remotely before doing a
client export. This program will give information about the missing definitions from the
data dictionary in the target. After executing this program and getting successful results
you can ensure that the client copy will have no problems. In case some tables are
different; you can use SE11 to compare and adjust the table structure in both the system
before the client copy. A remote test client copy also can be executed to know the
differences between source client and target client.
10. If you are not in release 2.2 then do not use R3trans to copy a client.
Kill the Work process--------------------------
2. Go to transaction SM50.
Overview screen until the stopped process has cleared from the
display.
If this does not kill the process, you can go to transaction SM04 and kill the user’s
session. If this does not kill the process, you can log on to the server, open a Task
Manager session, and End the Process. If this does not kill the session, there is an
executable in the RUN directory on the server called sapntkill.exe. Run it providing the
process ID number. If none of the above work, you have no choice but to “bounce” the
SAP instance and/or possibly the serve.
This procedure should allow the Basis team to create a RFC connection in any SAP
server.
4. On the new screen, give RFC destination name – Name by which the
connection would be identified
5. Give Connection Type ( 3 for any SAP to SAP communication ) F4 Help will list
down all possible types of connections
6. Give Description for the RFC Connection – Generally the purpose of the
connection is mentioned here
7. Click SAVE
9. Click SAVE
After the client export procedure is completed, if you chose the client independent data
then three transports are created in /usr/sap/trans/cofiles or there will be two transports:
<sid>KO<no> for the client-independent data ( if selected). For example if the client
export is done from development client 100 then the file will look like DEVKO0001.
<sid>KX<no> for the SAPscript objects as Texts and forms. For example DEVKX0001
The data export is performed automatically. The output of the export includes the name
of the COMMFILE that has to be imported. The following data files will be created
in/usr/sap/trans/data directory using the same example given above:
Tips: Make sure that all the cofiles and the datafiles exist in the data and cofile directories
before starting the import phase.
Then add all the command files to the buffer by using the TP command in
/usr/sap/trans/bin directory as following:
Then logon as <sid>adm to the target system and then use then import the transports as
following:
tp import devkt00001 qas client100 u148 – For the client dependent data
tp import devko00001 qas client100 u148 – For client independent data
(In the above example QAS is the target system and 100 is the target client)
After you import a client from another system, you must perform post-processing,
activities in order to adapt the runtime environment to the current state of the data. To
execute post-processing, choose Tools -> Administration- >Client admin ->Client
transport->client import or transaction SCC7. Transaction SCC7 will take you to the
client import post-processing screen . In that screen the transport from the last tp import
is proposed. Please check the transport number and if every thing is according to the
order then press enter and that will take care of the post processing activities. You can
also use SCC2 to execute the same process as in transaction SCC7. During this process,
the SAPscript texts are imported and application reports are generated. If there are
inconsistencies, you need to repeat the import after checking the log.
If you get any problem importing the SAPscript objects then use the RSTXR3TR
program in the target client to import those. In this screen you can enter the transport
request for the SAPscript object. According to the above example devkx00001. In the
second line you need to enter the path for the SAPscript data file as following:
You can choose the import option from the “mode” option. Then you can continue to
execute the program and it will successfully complete the import of SAPscript objects to
the target client.
Up to release 3.0, RSCLIEXP program can be used to create the command files. The tp
command is used to do the import as we have seen before and the RSCLIIMP program is
executed for the post-processing activities and the consistency of data.
In 4.0 after the client is exported from the source system using transaction SCC8 as we
have seen in the client export section, the following transport files are created.
<sid>KO<no>: For the client-independent data (if the copy profile selected includes
client independent data:
<sid>KR<no>: For the client-specific data.
When all the above transports get released from the source system, the data is exported to
the data files of /usr/sap/trans/data directory automatically. The cofiles are also created in
the /usr/sap/trans/cofiles directory.
Then the command files need to be added to the buffer for the import using the format
from the cofiles as following:
If you are transporting to a new client then the new client should be created in the target
system. Then you can start the import into the target system as shown in the following
UNIX example:
After the “tp import” process completes successfully, start transaction SCC2 and then
execute the import into the target client. This process imports all the SAPscript objects
and generates all the programs. After the client is imported successfully, you should
perform the post-processing activities by using the following path:
After the post processing is done, we recommend doing table compare between the
source client and the target client to check all the client dependent and independent tables
for consistency.
Step by Step Procedure to create a copy of a client locally in the same SAP server.
3. Go to change mode
4. Create a new client, assign client number & description as per request
5. Logoff from current client.
8. Give reference client for copy and profile as per the request
1. Master data can not be copied without copying transactional data and transactional
data can not be copied without copying master data.
2. Application data (transactional and master) should not be copied without copying
configuration data.
3. Client copy requires a valid client as the destination client. Make sure that the
client exists in T000 table and you can logon to that client.
4. The transport system and the transport management system of 4.0 are the only
proper tool to be use to keep multiple systems in sync by transporting development and
customizing changes to another instance.
5. When you copy a client from one system to another, client-independent tables
should only be copied if they are not yet modified in the target system.
6. We recommend the users to read all the OSS notes regarding client copy that
applies to their SAP release. It is always better to schedule the client copy job in the
background for the night run when normal work is not taking place.
8. To avoid data inconsistencies all the users working in the source and target clients
should logoff from the system.
9. RSCLICHK program should be run in the target system remotely before doing a
client export. This program will give information about the missing definitions from the
data dictionary in the target. After executing this program and getting successful results
you can ensure that the client copy will have no problems. In case some tables are
different; you can use SE11 to compare and adjust the table structure in both the system
before the client copy. A remote test client copy also can be executed to know the
differences between source client and target client.
10. If you are not in release 2.2 then do not use R3trans to copy a client.
* Go to change mode
* Create a new client, assign client number & description as per request
* Login to newly created client in destination SAP server using the following
credentials :
ii User Id : SAP*
* Use Transaction Code SM59 to create a RFC Connection for client copy if does not
exist already.
* RFC Connection should have Target Server as Destination and the test results should
say “Connection test OK”
* Use SCC9 Transaction code to go to client copy screen.
* Select RFC destination created for the purpose for the source client to client copy
* Use Transaction code SCC3 for monitoring the progress of client copy
___________________________________________________________________
Golden rules for CLIENT Copies
1. Master data can not be copied without copying transactional data and transactional
data can not be copied without copying master data.
2. Application data (transactional and master) should not be copied without copying
configuration data.
3. Client copy requires a valid client as the destination client. Make sure that the
client exists in T000 table and you can logon to that client.
4. The transport system and the transport management system of 4.0 are the only
proper tool to be use to keep multiple systems in sync by transporting development and
customizing changes to another instance.
5. When you copy a client from one system to another, client-independent tables
should only be copied if they are not yet modified in the target system.
6. We recommend the users to read all the OSS notes regarding client copy that
applies to their SAP release. It is always better to schedule the client copy job in the
background for the night run when normal work is not taking place.
8. To avoid data inconsistencies all the users working in the source and target clients
should logoff from the system.
9. RSCLICHK program should be run in the target system remotely before doing a
client export. This program will give information about the missing definitions from the
data dictionary in the target. After executing this program and getting successful results
you can ensure that the client copy will have no problems. In case some tables are
different; you can use SE11 to compare and adjust the table structure in both the system
before the client copy. A remote test client copy also can be executed to know the
differences between source client and target client.
10. If you are not in release 2.2 then do not use R3trans to copy a client.
1. Take offline backup of both the server (source and target servers)
a. Login as adm
b. svrmgrl
c. connect internal
e. exit;
g. Copy the text from CREATE CONTROLFILE until the (;) and paste it in to any
new .sql or controlfile.sql file.
i. Edit the file and replace the entire source SID to target SID.
j.. Edit the reuse database command with the set database command
4. Copy the generated during the backup file from the source system to target system.
(/oracle//sapbackup)
b. Only don’t change the backup volume name it must be target system .
c. Copy the above aft file name line from the source back.log to target.log file.
6. From this onwards all the command on the target system only.
a. Login as Orasid
c. select Restore/Recovery
i. svrmgrl
j. connect internal;
k. startup nomount (if the database is already mounted shutdown it using the
shutdown command)
n. After the run the above command it should give the “Statement Processed)
o. alter database open resetlogs
p. shutdown
10. If you want to change the Client number then use the local copy tool and remove the
original client after successful import to new client.
Replace SAP Splash Logo: Change default SAP Logo on front screen.
1. Identify a picture to replace the existing SAP logo. This picture can be in any valid
picture format - gif, bmp, jpg. But convert it to jpg since that is the smallest available
picture type. Store the picture somewhere on your workstation.
2. Go to transaction SMW0.
3. On the SAP Web Repository: Initial Screen, click “on” the radio button for Binary data
for WebRFC applications, and click the Find icon or press F8. On the SAP Web
Repository: Objection selection screen, click the Execute icon or press F8.
4. On the SAP Web Repository: Object display screen, first make sure that the mime
extension exists for your picture type. Click Settings -> Maintain MIME types. Look to
the far right of the Data Browser: Table MIMETYPES Select Entries screen, and if you
don’t see your file type - gif, jpg, bmp - then you need to add it. Once you at done, back
out to SAP Web Repository: Object display screen.
5. Now you can upload your picture. Click the Create icon or press F5. Fill in the name of
your picture and a brief description and click the Import icon. Then provide the location
of your picture and load it in.
6. Go to transaction SM30. Fill in the table name SSM_CUST and click Maintain.
7. On the Change View “Set Values for the Session Manager / Profile Generator” screen,
click New Entries and add an entry called START_IMAGE and set the value to the name
of your picture created in step #5. Then press the Save icon.
You have replaced the SAP splash screen picture. Log off and back on to view your
work!
2. Once both files have been downloaded, log on to the UNIX server as <sid>adm
and copy them up to a directory on the UNIX server - I use one called
/usr/sap/trans/NewKernel. unCAR the files with SAPCAR command “sapcar -xvf
“SAPEXE*.SAR”.
3. As <sid>adm, stop the SAP instance. Log on as ora<sid> and stop the TNS
listener, and log on as root and stop saposcol.
4. Make a backup of your run directory before patching. I usually create a
/usr/sap/<SID>/SYS/exe/backup_run and copy all the files in
/usr/sap/<SID>/SYS/exe/run to it.
6. Change the owner of saposcol to root, sapdba & all br* files to ora<sid>, and all
the rest to <sid>adm.
8. You have patched your UNIX SAP kernel. If you run into any problems starting
your SAP instances, stop everything, rename the directories /usr/sap/<SID>/SYS/exe/run
to /usr/sap/<SID>/SYS/exe/bad_run and /usr/sap/<SID>/SYS/exe/backup_run to
/usr/sap/<SID>/SYS/exe/run to restore your old kernel.
3. High-light the main transport in the list - not the subtasks contained in the list -
and click Ctrl+F11.
4. Turn “on” the radio button “Freely selected objects” that appears in the popup and
press Enter
or click the Copy button.
5. In the “Include objects in request” screen, turn “on” the “Selected Objects in the
Selection by
type and name” section.
6. Check “on” the check box on the appropriate line, and enter the name of the object
to be
added to the transport - ZPROGRAM in our case. Click the Execute button or press F8.
7. On the “Include objects in request” screen, click the “Include Request” button or
press F9. You will
see a confirmation message in the status bar at the bottom of the screen.
Now you can release your transport and let it move to QAS!
P 10.1.1.* 194.117.106.129 *
P 10.1.1.* 194.117.106.130 *
P 194.117.106.129 10.1.1.61 3200
6. Go to http://service.sap.com/system-data.
14. Under System tab, scroll down to SAP-router, and look for an edit icon to the right.
Click on the edit icon, and enter the saprouter’s NETBIOS name, and under Service-port
enter 3299.
15. Under DB server tab click on the change icon and enter the NETBIOS name of the
server, along with the local IP address. Unless you have two saprouters, do not enter
anything under Additional SAP-Router field.
16. Under Appl.Server tab do the same thing. If you have a system that has the db
server and the application server running on it, then the IP address will be the same.
17. On a workstation (Windows XP) that has the SAP GUI, install Service Connector
from SAP’s site.
19. To set-up the maximum time for SAP connection, click on Semi-Automatic
Opening and enter the number of days for connecting to SAP.
When you are done installing then, run first SAPServiceConnector, and the LOP.After
less than a minute, you can check on the SAP website if the connection is open.
SAP Startup Problems in Windows------------------------
There’s probably nothing worse than not being able to start your SAP system …
Especially the production system! Aside from the operating system and the database
server you must pay close attention to certain places in SAP to find out what caused the
problem and how to solve it. Here are the two places you will definitely need to check:
EventViewer (Application and System logs) and the SAP Management Console (MMC).
EventViewer can provide useful information and it may help you pinpoint where the
problem resides. The SAP MMC gives you the ability to visually see the system status
(green, yellow or red lights), view the work processes status and view the developer
traces, which are stored in the “work” directory. Example:
\usr\sap\TST\DVEBMGS00\work.
For a central SAP instance to start successfully, both the message server and the
dispatcher need to start. If one of them or both fail to start, users cannot log in to the
system. The following scenarios will illustrate possible causes of why an SAP instance
might not start and the reason of the message:
Developer Traces:
The “services” file, which contains TCP and UDP services and their respective port
numbers. This plain-text configuration file is located under %winnt
%/system32/drivers/etc.
Symptoms
Problem Analysis
Solution
If your server has a firewall client, disable it and attempt to start the SAP instance again.
If the instance starts successfully you can enable the client firewall back again.
If there is no firewall client at all, or if disabling it did not resolve the problem, edit the
“services” file and check what port the appropriate “sapdp” is using.
If the instance number is 00, look for sapdp00. If the instance number is 01 look for
sapdp01 and so on. You can use the following OS command to help you resolve port
conflicts:
netstat -p TCP
There are also utilities on the Internet that can help you list all the TCP and UDP ports a
system is using.
Scenario 2: Dispatcher dies due to a database connection problem
Symptoms
No database connections.
No work processes.
Problem Analysis
A connection to the database could not be established because either the SQL login
specified in parameter “dbs/mss/schema” is set incorrectly or the SQL login was deleted
from the database server. This parameter needs to be set in the DEFAULT.pfl system
profile (under \usr\sap\<SID>\sys\profile). In the messages above, we see that the SQL
login ‘tst’ is expected but it does not exist at the database level.
Solution
Set the entry to the appropriate database owner. If the system is based on Basis <= 4.6 or
if the system was upgraded from 4.x to 4.7 the database owner should be “dbo”. But, if
the system was installed from scratch and it’s based on the Web AS 6.x the database
owner should match the SID name in lower case. Example: if the SID is TST then the
database owner should be “tst”. If the parameter is set correctly in the DEFAULT.pfl
profile check at the database level if the SQL login exists. If it doesn’t, create it and give
it database ownership to the <SID>.
Scenario 3: SAP does not start at all: no message server and no dispatcher
Symptoms
The message server and the dispatcher do not start at all in the SAP MMC.
The following error when trying to view the developer traces within the SAP MMC: The
network path was not found.
Problem Analysis
The network shares “saploc” and “sapmnt” do not exist. That explains the “network path
not found” message when attempting to view the developer traces within the SAP MMC.
Solution
Re-create the “saploc” and “sapmnt” network shares. Both need to be created on the
\usr\sap directory.
Scenario 4: Users get ‘No logon possible’ messages when they attempt to log in
Symptoms
Users get the login screen but the system does not log them in. Instead, they get this
error: No logon possible (no hw ID received by mssg server).
In the SAP MMC, the message server (msg_server.exe) shows status “stopped”.
Problem Analysis
Work processes were able to start but the message server was not. The reason is because
the “services” file is missing the SAP System Message Port entry. Example: SAPmsTST
3600/tcp
Solution
Edit the “services” file and add the entry. Then, re-start the instance. Make sure you
specify the appropriate TCP port (e.g. 3600) for the message server.
Symptoms
Problem Analysis
The keyword in the messages above is “service unknown” followed by the entry name
“sapdp00″. The dispatcher entry “sapdp00″ is missing in the “services” file. Example:
sapdp00 3200/tcp
Solution
Add the necessary entry in the “services” file. Example: sapdp00 3200/tcp Then, re-start
the instance.
Symptoms
The SAP MMC Syslog shows the following error multiple times: “SAP-Basis System:
Shared Memory for PXA buffer not available”.
Problem Analysis
Solution
Edit the instance system profile at the OS level under \usr\sap\<SID>\sys\profile and
lower the value assigned to “abap/buffersize”. Then, restart the instance. Also, it’s
important to find out if any other memory parameter were changed. If not, the system
should start once the adequate memory allocation has been set to the the
“abap/buffersize” parameter.
There is a way to change entries of a table with SE16 even if you don’t have the
authorization:
Go in SE16, enter your table Name (ex: USR02). Display the entry (or entries) you want
to modify.
When you have your entry, write ‘/h’ to go in debug mode. Cross the line you want to
modify and press F7 (display function). Here, you are in the code… Press F7 again to
skip some code…
Change the value from SHOW to EDIT, click Change FLD Contents, and press F8…
or to delete an entry
Change the value from SHOW to DELE, click Change FLD Contents, and press F8…
Here we are… You can change the value to what you want, and don’t forget to save!
2. Go to transaction SM19.
3. From the top-most menu bar on the Security Audit: Administer Audit
Profile screen, click Profile -> Create.
4. On the Create new profile popup, type in a new Profile name and click
the green √ picture-icon.
6. Please note that while the user trace profile has been saved, it is not
yet active. To activate the user trace, see the next section Activating
a User Audit Profile.
2. Go to transaction SM19.
3. On the Security Audit: Administer Audit Profile screen, select the audit
profile to be activated from the Profile dropdown. Click the lit match
picture-icon to activate it. You will receive an Audit profile activated
for next system start in the status bar at the bottom of the screen.
The audit will not begin until after the SAP instance has been recycled.
2. Go to transaction SM20.
4. The resulting list is displayed. This list can be printed using the usual
methods.
Before opening a service connection for SAP, be sure that the SAPAG client has been
added to the appropriate SAP system and Client, and that a Security Audit Trace has been
activated for the SAPAG ID.
Before a Service Connection to a SAP server via your saprouter can be created, the
saprouter must run the LOP – Line Opener Program – to initiate the mode of SAP
connection. Please LOPInstalltion.exe on your saprouter server before trying to add and
open any Service Connections.
3. On the Service Connections – Overview screen, scroll down the page and find the
SAP instance you want to open. Click on the red X in that instance’s line.
4. In the Enter Data for the system’s semi-automatic opening popup, set the days,
hours, and minutes you want the service connection to stay open. Click the Continue
button.
Local or frontend printing is sometimes confusing in concept but actually very easy to
understand. As a rule, local printer is simply another way of saying that the user is going
to print to the default printer designated on his/her workstation. You probably do this all
the time with Windows to printerspreadsheets, Word documents, etc without thinking
about it. You can do the same thing using SAP.
2. Go to transaction SPAD.
3. On the Spool Administration: Initial Screen screen, click the Output Devices
button.
Output Name and Short name - I normally use a short name of “DESK” for
“Desktop Printing” but alot of people use a Short name “SWIN” or “LOCL”
Using this printer will cause print to go to SAPLPD which will use the default printer of
the current workstation.
* Dialog : Interpreting the ABAP code and execute the business logic. Used for
interactive online processing.
* Enqueue : Single “Central Lock Management Service” that controls the locking
mechanism between the different application servers and the database.
* Gateway : Used for transport of bigger amount of data between application servers as
well as external (non SAP) systems that communicate with SAP
Often this client does not have master users. If it is true, anyone
can log into the system using the client 066, user SAP*, and password PASS. Enjoy
yourself.
Using the command tp locksys «SysID» only the user SAP* will be allowed to login.
The command sapevt can be used to trigger an event from the operation system.
Run the command oerr ora «error number» under user ora«SysID».
The transaction BMV0 (direct input logs) shows all direct input logs.
Run the command imp help=yes under user ora«SysID». This format can also be used
with exp,impst,
and expst.
* Table analyses between two systems
The contents of a table between two systems can be checked through the transaction
OY19.
Almost all parameters can be set using the transactions ORFA (Asset Accounting),
Click on the message and hold the mouse button. After moving the mouse to the left
side.
* Graphics on SAPscript
The program RSTXLDMC can be used to upload graphics (file extension .tif on PC
files) into
individual standard text.
Since they have no postings you can use the transaction KA04 for deleting cost elements
Strike the key F4 (or click on matchcode symbol) and press ESCAPE. The current date
is automaticly set.
Soon after the lock try to access the transaction SU53. It reports the last objects verified
and
* Helpful reports
If you accidently applied hot packages out of sequence for instance. Use the transaction
SM31 to modify table PAT03.
You have to choose the desired patch and click on delete entry.
* Scheduling of system maintenance jobs
4. find . -name filename -print for checking the file in the present directory
6. df -k, bdf for checking all file system usages; df -k ., bdf. for individual file usages
10. rm < file> for removing file, gzip <file> for zipping the file.
11. Ps -ef is to check the how many running process and Kill any running process
12. gunzip to unzip file
13. tar -xvzf file name to run the zip folder of file content
guides