You are on page 1of 1

MADANAPALLE INSTITUTE OF TECHNOLOGY & SCIENCE;MADANAPALLE

III B Tech II Semester First Mid term Examinations :FEB 2011


MICROWAVE ENGINEERING
(ECE )
DATE: Time: 90 min Max.Marks:30
Answer any three of the following
1) a) Write advantages of Microwave over low frequency?

b) Discuss about Excitation of modes in rectangular waveguides?


2) Derive the field equation for TE modes in rectangular waveguides?

3) a) TE10 mode is propagate in rectangular waveguide a=6cm b=4cm by means of travelling detector
the distance between maximum and minimum is found to be 4.55cm. Find frequency of wave.

b)An air filled waveguide has dimension a=6cm, b=4cm, and signal frequency 3GHZ. Compute
i)cut-off frequency ii)wavelength of waveguide iii)phase constant iv)phase velocity v)group
velocity vi)characteristic impedance for TE10 mode.

4) Explain why TEM modes not exist in circular waveguide?

5) a)TE11 mode is propagating in circular waveguide a=5cm and guide contains air dielectric
i)Determine cut-off frequency? ii) Determine wavelength ƛg in the guide for an operating
frequency of 3GHZ. iii) Determine wave impedance Zg in the guide. (X’11=1.841)

b) An air filled circular waveguide is to be operated at frequency of 6GHZ and is to have dimension such
that fc=0.8f for the dominant mode. Determine i)the diameter of the guide ii)wavelength ƛg iii)phase
velocity Vp in the guide.(X’11=1.841)

You might also like