Professional Documents
Culture Documents
CAE Software
Engineering Services
Company
Blog
The file is not automatically configured at the installation stage, and an improper config will give you the following message when trying to send your first job: 'Please ensure your P3_TRANS.INI or site_setup file correctly points to the solver executable or that you have correctly set the proper environment variables to do the same.' An MD Nastran install supersedes an MSC Nastran install and so the MD Nastran parameters go into the [Nastran] section. Here is what it should look like: [Nastran] Host=LOCAL Hosttype=Windows Scratchdir=C:\SCRATCH Alocalcommand2010=C:\MSC.Software\MD_Nastran\20101\bin\mdnastranw.exe AcommandNasServer=C:\MSC.Software\Patran_x64\2010\mscnastran_files\servermode\nastran.exe Acommand2010=C:\MSC.Software\MD_Nastran\20101\bin\mdnastranw.exe Version=2010 ; Sample definitions for remote host ; Host=lansing ; Hosttype=UNIX ; Scratchdir=/tmp ; Acommand2008=/tmp/msc/nastran/bin/nast2008 ; definitions for local host ; Alocalcommand2008=/tmp/msc/nastran/bin/nast2008 ; definitions for both local and remote hosts ; Version=2008 ; Outputfiles=op2 ; OutputTypes=b Ohive's blog