Professional Documents
Culture Documents
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
I 1 1.1
EXCAVATION GENERAL EXCAVATION Oversite Excavation Excavate over site, commencing from ground level, to reduce level average 100mm deep average 200mm deep average 300mm deep over 300mm deep Pit/Trench Excavation Excavate to form pit or trench, commencing from reduced level ne 2.00m deep 2.00 - 4.00m deep 4.00 - 6.00m deep extra over for each 2.00m deep Basement Excavation Excavate to form basement, commencing from reduced level ne 2.00m deep 2.00 - 4.00m deep 4.00 - 6.00m deep extra over for each 2.00m deep Break Up Obstruction Extra over excavation for breaking up obstruction below ground level using mechanical means rock FILLING Backfilling Backfill around trench, column base, pile cap, foundation, beam and pier hole excavated material obtained within the site earthfilling obtained from contractor's own source Filling and Forming Embankments Deposit, spread, level, compact and consolidate in layers of 150mm thick to make up levels excavated material obtained within the site earthfilling obtained from contractor's own source
A B C D 1.2
m2 2 m m2 m3
A B C D 1.3
m3 m3 m3 3 m
A B C D 1.4
m3 m3 m3 m3
A 2 2.1
m3
92.17
92.17
92.17
92.67
93.00
A B
m3 m3
8.47 10.23
8.47 10.23
8.47 10.23
8.47 10.23
8.50 10.27
2.2
A B
m3 m3
7.33 10.93
7.33 10.93
7.33 10.93
7.33 10.93
7.37 10.97
Page 1/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
2.3
Hardcore and Aggregate Spread, level, compact, ram and consolidate hardcore, including blinding with sand DISPOSAL Excavated Material Remove excavated material off site to contractor's own dumping site
A 3 3.1
50.17
50.17
50.17
50.17
50.17
m3
12.57
12.57
12.57
12.57
12.83
Page 2/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
II 1 1.1
CONCRETE WORK IN-SITU CONCRETE Lean/Mass Concrete Lean or Mass concrete complying with BS 8110 in any location grade 15 grade 20 Reinforced Concrete Reinforced concrete complying with BS 8110 in any location grade 25 grade 30 grade 35 grade 40 grade 50 Extra over for waterproofing agent REINFORCEMENT Bar Reinforcement Mild steel bar reinforcement complying with SS 18 in any location 6mm diameter 10mm diameter 13mm diameter High tensile steel bar reinforcement complying with SS 2 in any location 10mm diameter 12/13mm diameter 16mm diameter 20mm diameter 25mm diameter 28mm diameter 32mm diameter 40mm diameter Fabric Reinforcement Welded fabric reinforcement complying with SS 32 and well lapped (measured net)
A B 1.2
m m3
187.33 196.67
192.50 202.17
193.90 203.97
199.57 210.97
204.00 212.67
A B C D E F 2 2.1
m m3 m3 m3 m3 m3
A B C
kg kg kg
D E F G H I J K 2.2
kg kg kg kg kg kg kg kg
A B C D E F G H I J
Reference No A6 Reference No A7 Reference No A8 Reference No A9 Reference No B6 Reference No B7 Reference No B8 Reference No B9 Reference No B10 Reference No D6
m2 m2 2 m 2 m 2 m m2 m2 2 m m2 m2
6.59 7.40 8.77 10.64 9.08 10.15 12.27 13.60 14.91 9.43
6.76 7.61 9.01 11.01 9.44 10.54 12.73 14.06 15.43 9.74
6.74 7.59 8.96 10.91 9.37 10.47 12.63 13.93 15.26 9.67
6.89 7.79 9.12 11.10 9.59 10.73 12.94 14.22 15.63 9.89
6.92 7.85 9.12 11.14 9.60 10.80 12.94 14.18 15.61 9.86
Page 3/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
2.2
Fabric Reinforcement Welded fabric reinforcement complying with SS 32 and well lapped (measured net)
K L 3 3.1
Reference No D8 Reference No D9 FORMWORK Timber Formwork Sawn formwork to in-situ concrete including strutting ne 3.50m high
m2 2 m
13.70 18.06
14.13 18.69
14.00 18.52
14.28 18.91
14.24 18.86
A B C D E F
flat surface of suspended slab vertical surface of pilecap, ground beam, etc. vertical surface of column, walls vertical curved surface of column, wall sides and soffits of beams vertical edge for each 100mm high Wrought formwork to in-situ concrete including strutting ne 3.50m high flat surface vertical surface curved surface Extra over formwork for strutting exceeding 3.50m each 1.50m high Metal Formwork Metal formwork to in-situ concrete including strutting ne 3.50m high vertical surface vertical curved surface 0.75mm Bondek/Condeck to flat surface of suspended slab 1.00mm Bondek/Condeck to flat surface of suspended slab Extra over formwork for strutting exceeding 3.50m high each 1.50m high PRECAST CONCRETE Precast Concrete Hollow Core Slab 265mm 340mm EXPANSION JOINTS Joint Fillers Compressible non-extruding bitumen impregnated fibreboard to joint, including all necessary formwork 10mm thick 12mm thick 25mm thick
m2 m2 m m2 m2 m
2
G H I
m2 m2 m2
J 3.2
m2
2.00
2.03
2.03
2.03
2.03
A B C D
m2 m2 m2 m2
E 4 4.1 A B 5 5.1
m2
5.67
5.83
5.83
5.87
5.87
m2 m2
95.82 111.37
95.82 111.37
95.82 111.37
96.47 111.93
95.33 110.33
A B C
m2 2 m 2 m
Page 4/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
5.2
Joint Sealant Polysulphide sealer squeezed into joint 25 x 15mm joint 25 x 25mm joint Prestressing Cables Cable stand in beams complete with sleeves,anchors and all necessary accessories 12x12.9mm diameter WATERPROOF MEMBRANE Damp Proof Membrane Waterproofing sheet laid to top,side or underside of concrete structure 0.6mm thick polyethylene moisture barrier 0.8mm thick polyethylene moisture barrier approved bituminous INTEGRATED FINISH Power floated finish to suspended slabs generally with `Mastercron' or approved equivalent nonmetallic hardener
A B 5.3
m m
14.99 21.14
14.99 21.14
14.99 21.14
14.99 21.14
14.99 21.14
A 6 6.1
kg
5.40
5.57
5.57
5.57
5.57
A B C 7
m2 2 m m2
A B
m2 m2
4.57 16.57
4.57 16.57
4.57 16.57
4.57 16.57
4.57 15.90
Page 5/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
III 1 1.1
BRICKWORK AND BLOCKWORK CLAY BRICKS Common Brickwork (Standard Size) Common brick in cement mortar (1:4) with mortar plasticiser
A B 1.2
115mm thick wall 230mm thick wall Facing Brickwork First quality facing brick in cement mortar (1:4) with plasticiser 115mm thick wall 215mm thick wall CONCRETE BLOCKS Hollow Blockwork Hollow concrete block in cement mortar (1:4) 390x190x90mm thick wall 390x190x190mm thick wall
m2 m2
30.13 60.25
30.88 61.25
30.88 61.25
30.88 61.25
30.88 61.25
A B 2 2.1
m2 m2
41.97 85.80
42.37 86.63
42.37 86.63
42.30 86.13
42.30 86.13
A B
m2 m2
25.33 48.80
25.60 49.27
25.60 49.27
25.43 48.97
25.67 49.17
Page 6/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
IV 1 1.1
ROOFING TILE ROOFING Clay Roof Tiles `GR 13' French clay interlocking roof tiles with galvanised nails on every 4th course generally Extra over `GR 13' French clay for roof accessories ridge or hip tile "Roman GR 13" or other equal roof tiles fixed to batten with galvanised nails at approximately 400mm centres generally Extra over GR13 for roof accessory
57.26
57.26
57.26
57.26
57.26
42.12
42.12
42.12
42.12
42.12
m2
47.78
47.78
47.78
47.78
47.78
ridge or hip tile TBF Romane tile fixed to battens (measured separately) with galvanised nails at approximately 400mm centres generally Extra over `TBF Romane tile' for roof necessary
39.25
39.25
39.25
39.25
39.25
55.99
55.99
55.99
55.99
55.99
F 1.2
ridge or hip tile Concrete Roof Tiles Redland `51' or Pelangi interlocking concrete roofing tile complying with SS310 and SS CP43 fixed to battens (measured separately) with galvanised nails at every other course
42.78
42.78
42.78
42.78
42.78
generally Extra over for Redland `51' or Pelangi roof accessories ridge tile Monier interlocking concrete roofing tile complying with SS310 and SS CP43 fixed to battens (measured separately) with galvanised nails at every other course
m2
21.60
21.60
21.60
21.60
21.60
13.84
13.84
13.84
13.84
13.84
35.07
35.07
35.07
35.07
35.07
21.10
21.10
21.10
21.10
21.10
Page 7/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
2 2.1
BUILT-UP ROOFING Insitu Finishes `Vermiculite' lightweight screed wood floated finish laid to falls on concrete to receive waterproof membrane
A B C
25mm 50mm add or deduct for each 10mm thickness `Ais-Texsa' lightweight concrete insulating underbeds to flat roof to falls 75mm add or deduct for each 10mm thickness Cement and sand (1:3) screed with `Sika' waterproofing additive
m2 m2 m2
D E
m m2
16.04 4.38
16.04 4.38
16.04 4.38
16.04 4.38
16.04 4.38
F G H
25mm 50mm add or deduct for each 10mm thickness Cement and sand (1:3) screed 25mm 50mm add or deduct for each 10mm thickness Waterproofing Membranes Roof waterproofing membrane system on screed (measured separately)
m m2 m2
I J K 2.2
m2 m2 m2
Nuralite sheet 3mm Mortar Plas waterproofing membrane with minimum 75mm laps to flat surface to vertical surface Bituthene 3000 waterproofing membrane to flat surface to vertical surface Hypalon waterproofing membrane
m2
53.67
53.67
53.67
53.67
53.67
B C
m2 m2
21.67 22.69
21.67 22.69
21.67 22.69
21.67 22.69
21.67 22.69
D E
m2 m2
26.80 26.80
26.80 26.80
26.80 26.80
26.80 26.80
26.80 26.80
F G
to flat surface to vertical surface `Apex' waterproofing membrane to flat surface to vertical surface Carboeol waterproof membrane to flat surface to vertical surface 2mm `Texsaplas' exposed synthetic waterproofing membrane gutter
m2 m2
30.73 30.73
30.73 30.73
30.73 30.73
30.73 30.73
30.73 30.73
H I
m m2
26.54 26.54
26.54 26.54
26.54 26.54
26.54 26.54
26.54 26.54
J K
m m2
27.69 29.97
27.69 29.97
27.69 29.97
27.69 29.97
27.69 29.97
20.98
20.98
20.98
20.98
20.98
Page 8/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
2.2
Waterproofing Membranes 0.90mm `Uniroof' waterproofing membrane flat surface vertical surface Panel Roofing Waterproofed cement and sand (1:3) screed 25mm thick (average) 50mm thick (average) Precast concrete panel grade 20 roof slab 600 x 600 x 50mm PROFILED SHEET ROOFING OR CLADDING Steel Deckings Galvanised steel roof or wall cladding with zincalume coating and colorbond finish on one side, fixed to steel or timber framing (measured separately) with fixing clips,bolts and nails 0.47mm thick Stramit `Multideck Hi-Ten' sheet 0.48mm thick BlueScope Lysaght `Trimdek HiTen' sheet 0.53mm thick Stramit `Speed Deck Hi-Ten' sheet 0.53mm thick BlueScope Lysaght Colorbond XRW Kliplok Hi-Ten roofing sheet Galvanised steel roof or wall cladding with zincalume coating and colorbond finish on one side, fixed to steel or timber framing (measured separately) with fixing clips,bolts and nails 0.47mm thick BlueScope Lysaght Colorbond XRW Crimp Curved Trimdek Hi-Ten roofing sheet 0.61mm thick Stramit `C-Clad' sheet 0.65mm thick Stramit `Sped Deck Hi-Ten' sheet RAINWATER GOODS Flashings/Cappings 0.61mm thick galvanised steel standard rainwater goods with zincalume coating and colorbond finish including fixing clips, bolts and nails girth flashing girth capping 1.0mm thick Zincalume (unpainted) box gutter including fixing accessories girth flashing girth capping
M N 2.3
m m2
29.41 30.57
29.41 30.57
29.41 30.57
29.41 30.57
29.41 30.57
A B
m m2
16.46 29.90
16.66 30.27
17.13 31.10
17.13 31.10
17.16 31.10
C 3 3.1
31.93
32.26
32.26
32.93
32.93
A B C D
m2 m2 m2
m2
45.63
45.63
45.63
45.63
45.63
F G
m2 m2
44.90 50.57
44.90 50.57
44.90 50.57
44.90 50.57
44.90 50.57
4 4.1
A B
m 2 m
34.50 44.70
34.50 44.70
34.50 44.70
34.50 44.70
35.20 45.23
C D
m2 2 m
49.70 52.81
49.70 52.81
49.70 52.81
49.70 52.81
49.73 52.81
Page 9/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
4.1
Flashings/Cappings 1mm thick natural anodised aluminium including fixing clips, bolts and nails girth flashing girth capping 2mm thick natural anodised aluminium including fixing clips, bolts and nails
E F
m2 2 m
48.77 57.03
48.77 57.03
48.77 57.03
48.77 57.03
47.37 55.66
G H
girth flashing girth capping Stainless steel in No 4 brush finish including fixing chips, bolts and nails
m2 m2
56.39 56.99
56.39 56.99
56.39 56.99
56.39 56.99
56.82 57.66
I 4.2
girth flashing Gutters 1.2mm thick galvanised steel open box gutter with zincalume coating and colorbond finish including brackets, fixing clips, bolts, nails and laying to falls
m2
67.09
67.09
67.09
67.09
67.09
A 4.3
gutter UPVC Downpipes Unplasticied polyvinyl chloride rainwater downpipe including solvent welded joints and jointing to sumps and drains 75mm diameter 100mm diameter 150mm diameter 250mm diameter SUNDRIES Insulation Insulation material to roof 50mm thick fibreglass insulation, density 16 kg/m3 25mm thick Insulation material to roof ACI Sisalation 450 double-sided, double reinforced aluminum foil insulation paper with 150mm laps 50mm `Roofmate' or equivalent extruded polystyrene insulation board
m2
95.40
95.40
95.40
95.40
95.40
A B C D 5 5.1
m m m m
A B
7.00 5.67
7.00 5.67
7.00 5.67
7.00 5.67
7.33 5.67
m2
m2
5.08
5.08
5.08
5.08
5.08
m2
18.67
18.67
18.67
18.67
18.67
5.2
Wire Mesh Wire mesh to roof space including dressing over purlins (measured net) BRC Reference No 3315 (75 x 75 x 1.5mm diameter) Purlin Lysaght Z20020 purlin Lysaght C20025 purlin m m 25.33 30.70 25.33 30.70 25.33 30.70 25.33 30.70 25.33 30.70
3.76
3.76
3.76
3.76
3.86
5.3 A B
Page 10/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
V 1 1.1
CARPENTRY AND JOINERY CARCASSING Structural Timber Sawn timber in carpenter's works kapur balau kempas chengal Timber Preservation Extra over structural timber for pressure impregnation with a suitable wood preservative to an average dry salt retention of 5.6kg/m3 and complying with SS 72 and treated in accordance with SS CP 1
A B C D 1.2
m m3 3 m m3
A 2 2.1
generally FRAMING Mouldings Bead, picture rail, architrave, fillet and cornice and the like not exceeding 500mm2 in sectional area including gluing and nailing
m3
74.67
74.67
74.67
74.67
74.67
A B C 2.2
teak chengal balau Joinery Framing Wrought kapur in frame and the like
m m m
per 1000mm2 sectional area Wrought tanalised chengal in frame and the like per 1000mm2 sectional in area Wrought teak in frame and the like
4.78
4.78
4.78
4.78
4.78
21.04
21.04
21.04
21.04
21.04
per 1000mm2 sectional in area Wrought oak in frame and the like
31.55
31.55
31.55
31.55
31.55
D 2.3
per 1000mm2 sectional in area Handrails Wrought oak in handrails and the like per 1000mm2 sectional area Wrought kapur in handrails and the like per 1000mm2 sectional area Wrought Balau in handrails and the like per 1000mm2 sectional area
39.87
39.87
39.87
39.87
39.87
69.48
69.48
69.48
69.48
69.48
26.38
26.38
26.38
26.38
26.38
33.66
33.66
33.66
33.66
33.66
Page 11/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
2.4
Stud Partition Framing Sawn kapur framing fixed at 600mm centres bothways
A B 3 3.1
50 x 50mm cross-section 50 x 75mm cross-section LININGS Calcium Silicate Boards Calcium silicate board reinforced with selected fibres and fillers (Class 0) including pointing
m 2 m
25.06 36.23
25.06 36.23
25.06 36.23
25.06 36.23
25.06 36.23
A B C 3.2
6mm thick 9mm thick 12mm thick Cement Building Boards Cement building board including pointing
m2 m2 2 m
A B 3.3
6mm thick 12mm thick Gypsum Boards Bare finish gypsum board including pointing
m2 m2
18.85 26.24
18.85 26.24
18.85 26.24
18.85 26.24
18.85 26.24
A B 3.4
10mm thick 13mm thick Plywoods Non-waterproofed plywood complying with SS1
m2 m2
16.92 20.85
16.92 20.85
16.92 20.85
16.92 20.85
17.39 21.45
A B C D
6mm thick 12mm thick 18mm thick 25mm thick Waterproofed plywood type WBP
m2 m2 m2 m2
E F G H 3.5
6mm thick 12mm thick 18mm thick 25mm thick Laminated Plastics Laminated plastic sheet to BS 3796 including compatible adhesive
m2 m2 m2 m2
A B C
0.8mm thick Formica 0.8mm thick Print 1.0mm thick Formica Laminated plastic sheet to BS 3796 including compatible adhesive
m 2 m 2 m
D E F G
1.0mm thick Print 1.2mm thick Print 1.3mm thick Print 1.3mm thick Formica
m2 m2 2 m 2 m
Page 12/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
4 4.1
WALL INSULATION Fibreglass Supply and fix fibreglass 50mm thick, 48 kg/m3 75mm thick, 48 kg/m3 Mineral Wool Supply and fix mineral wool
A B 4.2
m2 2 m
22.70 28.38
22.70 28.38
22.70 28.38
22.70 28.38
22.70 28.38
A B C 5 5.1
25mm thick, 48 kg/m3 50mm thick, 48 kg/m3 25mm thick, 80 kg/m3 PANELLING Timber Panelling 100mm wide tongued and grooved wrought boarding fixed to battens (measured separately)
m2 2 m 2 m
A B C D E 5.2
13mm thick ramin 19mm thick ramin 13mm thick chengal 19mm thick chengal 25mm thick chengal Woodwool Slab Wall Panelling Supply and fix woodwool slab to wall 50mm thick Glasal Panels `Glasal' fully compressed autoclaved fibre cement sheet panel fixed to timber frame
m m2 m2 m2 m2
A 5.3
m2
17.83
17.83
17.83
17.83
17.83
45mm thick panel fixed to timber frame and bend FLOORING Floor Boards 100mm wide wrought plain edge floor board fixed to bearers (measured separately)
m2
120.92
120.92
120.92
120.92
120.92
6 6.1
A B C D
19mm thick teak 25mm thick teak 19mm thick chengal 25mm thick chengal 100mm wide wrought tongued and grooved floor board fixed to bearers (measured separately)
m2 2 m 2 m m2
E F G H I
19mm thick teak 25mm thick teak 19mm thick chengal 25mm thick chengal 20mm thick oak
m 2 m 2 m m2 m2
Page 13/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
6.2
Block/Parquet Flooring Teak parquet floor laid to herring-bone pattern, bedded and jointed with and including one coat of bituminous emulsion
A B
m m2
43.25 54.63
43.25 54.63
43.25 54.63
43.82 56.13
43.82 56.13
C 7 7.1
8mm thick DOORS Kapur Flush Doors Solid core flush door complying with BS 459 comprising hardwood lipping around 16mm wide vertical core strips glued and well cramped together and covered on both sides with 6mm thick plywood 45mm thick 50mm thick Skeleton framed flush door complying with BS 459 comprising hardwood lipping all round stiles and rails covered on both sides with 6mm thick plywood
99.60
99.60
99.60
99.60
99.60
A B
m 2 m
243.27 260.97
243.27 260.97
248.17 266.23
248.17 266.23
250.00 268.33
C D E
38mm thick 45mm thick 50mm thick Hollow core flush door complying with BS 459 comprising skeleton framing, hardwood lipping all round and covered on both sides with 6mm thick plywood
m2 m2 m2
F G 7.2
38mm thick 45mm thick Kapur Panelled Doors Panelled door complying with BS 459 in 3 panels comprising stiles and rails framed around 20mm thick plywood
m2 m2
178.33 198.20
176.67 197.67
180.67 202.17
180.67 202.17
183.33 204.33
A B
38mm thick 45mm thick Labour only to form observation panels of any size in doors
m2 m2
186.29 220.72
186.29 220.72
186.29 220.72
186.29 220.72
186.29 220.72
C 7.3
generally Timber Fire Door 1/2 hour rated fire door complying with SS 332 complete with fire proofed cylinder lockset, stainless steel ball bearing hinges, flush bolt, door closer and frame 900x2100x45mm thick, double leaf 900x2100x45mm thick, single leaf 1200x2100x45mm thick, single unequal leaf 1200x2100x45mm thick, double unequal leaf 1800x2100x45mm thick, double leaf
No
31.68
31.68
31.68
31.68
31.76
A B C D E
No No No No No
Page 14/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
7.3
Timber Fire Door 1 hour rated fire door complying with SS 332 complete with fire proofed cylinder lockset, stainless steel ball bearing hinges, flush bolt, door closer and frame 900x2100x45mm thick, single leaf 1200x2100x45mm thick, double unequal leaf
F G
No No
826.21 1303.47
828.90 1307.90
828.90 1307.90
828.90 1307.90
828.90 1307.90
2 hour rated fire door complying with SS 332 complete with fire proofed cylinder lockset, stainless steel ball bearing hinges, flush bolt, door closer and frame H 8 900x2100x45mm thick, single leaf PARTITIONS Drywall partition covered both sides with 2 layers of 13mm gypsum plasterboards with fibreglass/rockwood insulation including steel studs,fixing and jointing accessories A wall 150mm one hour fire rated gypsum drywall partition covered both sides with 2 layers 13mm gypsum plasterboard including steel studs fixing and jointing accessories B wall 214mm two hour rated gypsum drywall partition covered both sides with 3 layers 19mm,gypsum plasterboard including steel studs, fixing and jointing accessory C wall m2 149.57 150.97 150.97 151.07 151.07 m2 80.90 81.63 81.63 81.83 81.83 m
2
No
1438.50
1438.50
1438.50
1438.50
1438.57
61.35
63.77
63.77
63.77
62.50
Page 15/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
VI 1 1.1
STRUCTURAL STEELWORK & METAL WORK STRUCTURAL STEELWORK Mild Steel Members Mild steel member complying with BS 4360 grade 55 in welded or bolted construction
A B C D
universal column universal beam connection plates composite beam Mild steel member complying with BS 4360 Grade 50 in welded or bolted construction
kg kg kg kg
E F G H I
universal column universal beam universal curved beam connection plate roof truss Mild steel member complying with BS 4360 grade 43 in stanchion, beam, girder, roof truss, purlin, cleat and bracket
kg kg kg kg kg
J K 2 2.1 A B C
solid section hollow section METAL WORK Mild Steel Members hollow section, flat, rod, angle and channel complying with BS 4360 Grade 43C 50mm diameter tubular rail complying with SS17; light duty 38mm diameter tubular baluster/balustrade complying with SS 17; light duty Aluminium Members Aluminium members complying with BS 1474
kg kg
5.03 5.10
5.23 5.30
5.23 5.30
5.30 5.37
5.33 5.40
kg m m
2.2
A B
50mm diameter, 1.5mm thick natural anodised tubular rail 38mm diameter, 1.5mm thick natural anodised tubular baluster/balustrade
m m
46.33 37.17
46.33 37.17
47.00 37.83
47.00 37.83
47.00 37.83
Page 16/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
2.3
Stainless Steel Members Stainless steel members (AISI 304) with 180 grit finish
A B
50mm diameter, 1.5mm thick natural anodised tubular rail 38mm diameter, 1.5mm thick natural anodised tubular baluster/balustrade Stainless steel 2mm thick No 8 mirror finish 70mm diameter 2.50mm thick tubular rail cladding with all necessary steel bracket ceiling lining Stud Partition Framing Galvanised steel `C' channel framing fixed at 600mm centres bothways including forming door opening in partition
m m
103.90 81.33
105.20 82.50
105.90 83.33
105.90 83.33
105.90 83.33
C D E 2.4
m m m2
2
2,506.67 2,744.67
2,555.10 2,795.17
2,573.30 2,811.30
2,573.30 2,811.30
2,573.30 2,811.30
A 3 3.1
76 x 40 x 1mm thick MILD STEEL CONNECTIONS Mild Steel Bolts Mild steel plain bolts complying with BS 4190 including head, nut and washer
m2
48.00
48.00
48.00
48.00
48.00
A B C
12mm diameter grade 8.8 black bolt, ne 75mm long 12mm diameter grade 8.8 black bolt, 75 150mm long 12mm diameter holding down bolt, 300mm long including grouting Mild steel galvanised bolt complying with BS 4190 including head, nut and washer
No No No
D E F
12mm diameter grade 8.8 black bolt, ne 75mm long 12mm diameter grade 8.8 black bolt, 75 150mm long 12mm diameter holding down bolt, 300mm long including grouting WINDOWS Casements and Sashes Dark coloured anodised aluminium section frames in single light, complete with ironmongery, fixing straps, vinyl weather strips including building-in and pointing frame (glass measured separately)
No No No
4 4.1
A B C D
side-hinged window and casement frames top-hung window frame and sash sliding window frame and sash fixed window frame
m2 2 m m2 m2
Page 17/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
4.1
Casements and Sashes Natural anodised aluminium section frames in single light, complete with ironmongery, fixing straps, vinyl weather strips including buildingin and pointing frame (glass measured separately)
E F G H 4.2
side-hinged window and casement frames top-hung window frame and sash sliding window frame and sash fixed window frame Louvre Window Frames Dark coloured anodised aluminium adjustable louvre window frame complying with SS 212 including 6mm thick clips
m2 m2 2 m m2
A B 4.3
set of frame with single control set of frame with dual control Shopfront Supply and fix aluminium shopfront frame complete with 10mm thick tinted float glass and fixing accessories, ironmongeries
m m
41.50 43.90
41.50 43.90
41.50 43.90
41.50 43.90
41.50 43.90
generally Supply and fix aluminium shopfront frame complete with 12mm thick tempered tinted glass and fixing accessories
m2
330.53
330.53
330.53
330.53
330.53
B 4.4
generally Cladding Supply and fix dark coloured anodised aluminium frame complete with all necessary fixing accessories
m2
382.50
382.50
382.50
382.50
382.50
A B C 5 5.1
670mm overall girth as cladding to concrete post 390mm overall girth as sill 560mm overall girth as blind pelmet DOORS Door Frames Welded pressed galvanised steel rebated door frame to suit 110mm wall complying with BS 1245
m2 m2 m2
1.2mm thick
37.37
37.37
37.37
37.37
37.40
Page 18/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
5.2
Roller Shutter Manually operated roller shutter constructed of zincalume and colorbond finished sheet steel panel curtain permanently lock-seamed and wrapped around drum assembly with extruded aluminium section, bottom rail including PVC weather seal and ironmongery
generally Motor operated roller shutter constructed of zincalume and colorbond finished sheet steel panel curtain permanently lock-seamed and wrapped around drum assembly with extruded aluminium section, bottom rail including PVC weather seal and ironmongery
316.67
318.37
318.37
318.37
320.00
B 5.3
generally Metal Fire Doors 1/2 hour rated steel fire door complying with SS 332 complete with fire proofed cylinder lockset, stainless steel ball bearing hinges, flush bolt, door closer and frame
m2
563.33
566.67
566.67
566.67
560.00
A B
1100 x 2150mm high 1100 x 2150mm high complete with approved 6.35mm thick clear glass vision panel 600 x 125mm high 1 hour rated steel fire door complying with SS 332 complete with fire proofed cylinder lockset, stainless steel ball bearing hinges,flush bolt,door closer and frame
No No
1,078.77 1,170.48
1,111.53 1,204.33
1,111.53 1,204.33
1,111.53 1,204.33
1,111.53 1,204.33
C D
1200 x 2100 x 47mm thick, single leaf 2400 x 2100 x 47mm thick, double leaf 2 hour rated steel fire door complying with SS 332 complete with fire proofed cylinder lockset, stainless steel ball bearing hinges, flush bolt, door closer and frame
No No
1,253.31 2,583.83
1,228.40 2,532.40
1,228.40 2,532.40
1,228.40 2,532.40
1,228.40 2,532.40
E F G
1200 x 2100 x 48mm thick, single leaf 1800 x 2650 x 48mm thick, double leaf 2400 x 2100 x 48mm thick, double leaf 4 hour rated metal fire and acoustic doors 900 x 2090mm high, single leaf 1800 x 2400mm high, double leaf
No No No
H I
No No
2,857.01 6,486.47
2,950.50 6,691.40
2,950.50 6,691.40
2,950.50 6,691.40
2,950.50 6,691.40
Page 19/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
6 6.1
BALUSTRADES AND HANDRAILS Stainless Steel 900mm stainless steel glass balustrades comprising 75mm diameter tubular top rail, 20mm vertical flat bars and 12mm thick etched pattern tempered glass panels fixed to balusters with stainless buttons with bottom ends of baluster cast into concrete
A B
horizontal balustrades raking balustrades 1200mm high balustrades comprising 100mm diameter tubular stainless steel hairline finish top rail and 12mm thick clear tempered glass infill panel complete with all necessary fixings and jointings
m m
856.00 927.33
860.00 931.73
856.00 927.30
856.00 927.30
856.00 927.30
C D
horizontal balustrades raking balustrades 950mm high balustrades comprising 75mm tubular satin finish stainless steel top rail with 20x40mm vertical frames welded to top rail at 1000 centres with 12mm thick tempered glass infill panels complete with all necessary fixings and jointings
m m
1,316.00 1,397.17
1,322.10 1,403.63
1,316.00 1,397.17
1,316.00 1,397.17
1,316.00 1,397.17
E F 6.2
horzontal balustrades raking balustrades Polished Stainless Steel 600mm high balustrades comprising 50mm diameter, two 20mm tubular intermediate and bottom rails with 32mm tubular balusters fixed with 100x100x6mm bearing plates at 800mm centres
m m
1,113.17 1,171.33
1,118.37 1,176.80
1,113.17 1,171.33
1,113.17 1,171.33
1,113.17 1,171.33
raking balustrades 1000mm high balustrades comprising 65mm diameter tubular handrails and bottom rails both ends fixed with 150x150x6mm bearing plates with and including two 13mm diameter bolts with masonry anchors,38x4mm flat L shaped grid rails with 50x50x4mm triangular stiffener plates,50x6mm flat balusters at 1000mm centres fixed with 150x150x6mm bearing plates with and including two 13mm diameter bolts with masonry anchors fixed to concrete kerbs
325.47
335.55
325.47
325.47
325.47
horizontal balustrades
471.67
485.75
471.67
471.67
471.67
Page 20/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
6.3
Mild Steel 900mm high mild steel balustrades comprising 50mm diameter tubular handrails infilled with 20 x 6 thick top and bottom flat bars welded to 20mm diameter vertical sections including 20 x 6mm bar baluster
A B
raking balustrades horizontal balustrades 1000mm high mild steel balustrades comprising 50mm diameter tubular handrails infilled with 20 x 6 thick top and bottom flat bars welded to 20mm diameter vertical sections including 20 x 6mm bar baluster
m m
134.67 131.00
135.33 131.67
135.33 131.67
135.33 131.67
135.33 131.67
C D
raking balustrades horizontal balustrades 1000mm high mild steel balustrades comprising 38x4mm flat core and bottom rails, 38x4mm flat L shaped grid rails with 50x50x4mm triangular stiffener plates, 50x6mm flat balusters at 1000mm centres
m m
123.33 120.33
124.00 121.00
124.00 121.00
124.00 121.00
124.00 121.00
E 7 7.1
horizontal balustrades PROPRIETORY DEMOUNTABLE PARTITIONS Proprietory Toilet Cubicle Supply & fix `Domo ZF' Series partition including fixing accessories
116.74
116.74
116.74
116.74
116.74
A B C D E
single cubicle 1800mm wide range of two cubicles overall size 2000x1800mmcubicles overall size range of three deep 2700x1800mm deep overall size range of four cubicles 3600x1800mm deep overall size range of five cubicles 4500x1800mm deep `Moflex Carey' 10mm thick phenolic toilet partition/cubicle in selected colour complete with accessories
No No No No No
F 7.2
generally Proprietory Partition `Huppe' Variplan system sliding and folding partition of double shell construction comprising laminated 13mm three-ply quality chipboard with individual lever spring mounted by plastic coated ball bearing rollers on aluminium ceiling track supported on steel trusses, with vertical magnetic strips at meeting stile including all necessary framing and ironmongery
m2
251.78
251.78
251.78
251.78
251.78
8800x3600mm
No
Page 21/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
7.2
Proprietory Partition `Huppe' Variflex 100U mechanically operated wall system of steel and aluminium cavity frames including all necessary framing and ironmongery
8800x3600mm Styroplast partitions including all necessary stop ends, angles and intersections
No
C 8 8.1
50mm partition SUNDRY Surface Treatment Hot dip galvanising complying with SS 117 to structural steelwork
m2
56.13
56.13
56.13
56.13
56.13
generally
5.61
5.61
5.61
5.61
5.62
Page 22/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
VII 1 1.1
WALL AND CEILING FINISHES IN-SITU FINISHES Smooth Finished Plaster Cement and sand (1:4) plaster mixed with mortar plasticiser to concrete or brick surface including trowelling smooth
A B C 1.2
6mm thick 13mm thick 20mm thick Screed Backing Cement and sand (1:3) screeded backing to concrete or brick surface to receive tiling
m2 2 m 2 m
A B 1.3
13mm thick 20mm thick Aggregate Plaster Granite aggregate plaster consisting of cement and granite chippings (1:2) with mortar plasticiser to concrete or brick surface including scrubbing to produce exposed aggregate finish 20mm thick 25mm thick TILE FINISHES Labour Supply labour and mortar for laying homogenous tiles to wall including pointing with coloured cement
m2 m2
12.20 14.85
12.83 15.50
13.63 16.50
13.63 16.55
13.70 16.63
A B 2 2.1
m2 m2
25.50 26.00
25.50 26.00
26.47 26.93
26.67 27.00
26.67 27.00
generally Supply labour and compatible adhesive for laying layng tiles to wall including pointing with coloured cement generally STONE FINISHES Labour Supply labour and mortar for laying granite slabs including pointing with coloured cement
m2
26.63
27.63
28.13
28.13
28.63
B 3 3.1
m2
31.20
32.13
32.63
32.63
32.88
generally Supply labour and mortar for laying marble slabs includng pointing with coloured cement
m2
66.38
66.38
67.63
67.63
67.63
generally
m2
66.88
66.88
68.13
68.13
68.13
Page 23/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
4 4.1
SHEET FINISHES Labour Supply labour and compatible adhesive for fixing decorative fabric or vinyl paper to wall including cutting border strips, corners and motifs to profile
A 5 5.1
generally SUSPENDED CEILINGS Metal Framed Ceilings (Exposed Grid) Exposed grid type suspended ceiling comprising galvanised steel suspension tees with aluminium flanged cappings arranged in grid including 6mm diameter steel rod hangers, clips and rivetting to all ends of grids along the boundaries
m2
4.30
4.30
4.30
4.30
4.33
A B C D E F G H I J
16mm thick Armstrong `Minaboard Tegular' mineral fibre board 19mm thick Armstrong`Second Look Cortega' acoustical mineral fibre board 6mm thick calcium silicate board 12mm thick calcium silicate board 6mm thick cement building board 12mm thick cement building board 10mm thick fibrous gypsum board 16mm thick fibrous gypsum board 8mm thick plain plasterglass board 16mm thick Aflco randomed fissured fibreglass ceiling panel
m m
29.51 31.37 31.21 37.31 29.29 41.33 29.81 36.78 36.84 23.06
29.32 31.05 31.22 37.32 29.28 41.33 29.63 36.55 36.83 23.07
29.32 31.05 31.22 37.32 29.28 41.33 29.63 36.55 36.83 23.07
29.33 31.50 31.22 37.32 29.28 41.33 29.63 36.55 36.83 23.07
29.33 31.50 31.00 37.00 29.28 41.33 29.83 36.67 36.83 23.07
m2 m2 m2 m2 m2 m2 m2 m2
5.2
Metal Framed Ceilings (Concealed Grid) Recessed grid type suspended ceiling comprising galvanised steel suspension tees with aluminium flanged cappings arranged in grid including 6mm diameter steel rod hangers,clips and rivetting to all ends of grids along the boundaries
A B C D 5.3
16mm thick Armstrong `Minatone Fissured' mineral fibre board 19mm thick Armstrong `Travertone Sanserra' acoustical mineral fibre board 12mm thick fibrous qypsum board 16mm thick fibrous gypsum board Timber Ceilings Ceiling board nailed, pinned or screwed to and including 50x50mm pressure impregnated kapur frames at 600mm centres bothways and hangers
m2 m2 m2 2 m
A B
12mm thick fibrous gypsum board,including pointing 8mm thick plain plasterglass board
m m
36.17 41.50
36.17 41.50
36.17 41.50
36.17 41.50
36.17 41.50
Page 24/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
5.3
Timber Ceilings `Celotex' Hytone baroque or other equal and approved non-combustible random fissured mineral fibre board ceiling of panel size
600 x 1200 x 19mm thick Suspended fibrous plasterboard ceiling with sealed joints fixed to & including suspension system
m2
27.30
27.30
27.30
27.30
27.30
D E 5.4
12mm thick 19mm thick Metal Ceilings Linear metal suspended ceiling with chromated and stove enamelled finishes including galvanised steel runners, hangers,adjustment clips and fixing accessories
m m2
35.74 43.77
35.74 43.77
35.74 43.77
35.74 43.77
35.73 43.83
A B C D
Luxalon type 84C aluminium perforated linear ceiling `Luxalon' lineal strip suspended ceiling system 101x0.6mm thick `Luxalon Type V100' aluminium screen ceiling 0.6mm Dampa 200 type perforated aluminium strip ceiling
m2 m2 m2 m2
Page 25/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
VIII FLOOR FINISHES 1 1.1 IN-SITU FINISHES Plain Paving Cement and sand (1:3) paving including trowelling smooth A B C D E F 1.2 average 20mm thick average 25mm thick average 32mm thick average 38mm thick average 50mm thick add or deduct each 10mm thickness Waterproofed Paving Waterproofed cement and sand (1:3) paving with Sika `No 1' waterproofing compound or equivalent including trowelling smooth A B C D E 1.3 average 20mm thick average 25mm thick average 32mm thick average 38mm thick average 50mm thick Hardened Paving 25mm thick cement and sand (1:3) paving mixed with hardener including trowelling smooth A B light duty metallic hardener (0.25kg of hardener per kg of cement) heavy duty metallic hardener (0.5kg of hardener per kg of cement) 50mm thick cement and sand (1:3) paving mixed with hardener including trowelling smooth C D E F G H light duty non- metallic hardener (0.25kg of hardener per kg of cement) heavy duty non-metallic hardener (0.5kg of hardener per kg of cement) 3 coats Lapidolith hardener Granolith non-metallic hardener `Mastercon' premixed non-metallic hardener prepare & apply `Korodor 04' floor hardener power trowelled smooth and finish with one spray coat of `Korotex' curing compound internally A-H Silica Quartz hardener m
2
m2 m2 2 m m2 2 m 2 m
m2 m2 m2 m2 m2
m2 m2
17.17 22.73
17.17 22.73
17.83 23.50
17.83 23.50
17.87 23.53
m2 m m2 m2 m2
2
m2
44.84
44.84
45.10
45.10
45.10
Page 26/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
1.4
Granolithic Paving Granolithic aggregate paving consisting of cement,sand and granite chippings of 5mm gauge (2:1:5) set out in panels with 15x15mm deep recessed joints laterally at 1.20m centres including scrubbing to produce exposed aggregate finish
A B C D 1.5
25mm thick 32mm thick 40mm thick 50mm thick Screed Bed Cement and sand (1:3) screed to receive floor finishes
m2 2 m 2 m m2
A B C D E F G 2 2.1
13mm thick 20mm thick 25mm thick 32mm thick 38mm thick 50mm thick add or deduct each 10mm thickness STONE FINISHES Labour Supply labour for laying slabs with and including pointing with coloured cement
m2 2 m m2 m2 2 m 2 m m2
A B 3 3.1
granite generally marble generally BRICK FINISHES Brick Paving Supply and lay brick-on-edge paving in standard size 215x102.5x65mm first quality red facing brick complying with SS103 in cement mortar (1:4) with mortar plasticiser including pointing in coloured cement
m2 m2
66.25 66.25
66.25 66.25
67.25 67.25
67.25 67.25
67.25 67.25
A 4 4.1
generally TILE FINISHES Labour for Tiling Supply labour and mortar for laying tiles including pointing in coloured cement
m2
38.59
38.59
38.59
38.59
38.83
A B C
floor and horizontal surface skirting ne 150mm high skirting 150-300mm high Supply labour and compatible adhesive for laying tiles including pointing with coloured cement
m2 m m
D E
m m
30.95 7.22
30.95 7.22
30.95 7.22
30.95 7.22
31.00 7.33
Page 27/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
4.1
Labour for Tiling Supply labour and compatible adhesive for laying tiles including pointing with coloured cement
F 5 5.1
skirting 150-300mm high GLASS BLOCKS Floors Supply and lay glass `Solaris' 190x190x95mm thick glass block including pointing with white cement
10.38
10.38
10.72
10.72
10.83
A 5.2
generally Walls 95mm `NEG' hollow glass block generally 80mm thick with 6mm galvanised mild steel rod reinforcement
345.23
345.23
345.23
345.23
345.23
310.58
310.58
310.58
310.58
310.58
B 6 6.1
generally VINYL FINISHES Vinyl Tiles Supply and lay vinyl tiles with and including compatible adhesive for laying vinyl finishes
299.39
299.39
299.39
299.39
299.78
A B C D 6.2
300x300x3mm Armstrong 305x305x2.4mm Armstrong `Imperial' 300x300x3.2mm Armstrong `Excelon' 300x300x4mm asbestos Labour for Laying Tiles/Sheet Supply labour and compatible adhesive for laying vinyl finishes including hot welding seam joints with matching welding cord and polishing
m2 m2 m2 m2 -
A B 7 7.1
PVC tiles PVC sheet CARPET FINISHES Labour for Carpeting Supply labour and compatible adhesive for laying carpet including foam rubber underlay and fixing at perimeter
m2 m2
10.17 11.55
10.17 11.55
10.17 11.55
10.17 11.55
10.17 11.55
A B
m2 m2
7.56 8.50
7.56 8.50
7.56 8.50
7.56 8.50
7.68 8.56
Page 28/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
8 8.1
SUNDRIES Dividing Strip Supply and fix 25mm high extruded aluminium dividing strip to receive edge of floor finish
A B C
m m m
Page 29/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
IX 1 1.1
GLAZING STANDARD GLASS In Panes Obscured glass to timber or metal frame 5mm thick 6mm thick Clear float glass to timber or metal frame 5mm thick 6mm thick 8mm thick 10mm thick 12mm thick Tinted float glass to timber or metal frame 5mm thick 6mm thick 8mm thick 10mm thick 12mm thick Clear laminated float glass to timber or metal framethick 6mm 8mm thick 10mm thick 12mm thick Tinted laminated float glass to timber or metal frame
A B
m2 m2
57.10 62.19
57.10 62.19
57.10 62.19
57.10 62.19
57.28 62.51
C D E F G
m m2 m2 2 m m2
H I J K L
m2 m2 m2 m2 m2
M N O P
m2 m2 m2 m2
Q R S T U
5mm thick 6mm thick 8mm thick 10mm thick 12mm thick Tempered glass 12mm thick Tinted wired glass 6mm thick In Louvres Obscured glass with ends housed in grooves of timber frame or fixed to metal clips
m2 m2 m2 m2 m2
m2
210.59
210.59
210.59
210.59
205.52
W 1.2
m2
145.61
145.14
145.14
145.14
145.44
A B C D
100x5mm thick 100x6mm thick 150x5mm thick 150x6mm thick Clear float glass with ends housed in grooves of timber frame or fixed to metal clips
m m m m
100x5mm thick
4.05
4.05
4.05
4.05
4.06
Page 30/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
1.2
In Louvres Clear float glass with ends housed in grooves of timber frame or fixed to metal clips
F G H
100x6mm thick 150x5mm thick 150x6mm thick Tinted float glass with ends housed in grooves of timber frame or fixed to metal clips
m m m
I J K L
100x5mm thick 100x6mm thick 150x5mm thick 150x6mm thick Georgian wired polished glass with ends housed in grooves of timber frame or fixed to metal clips
m m m m
M N 1.3
100x6mm thick 150x6mm thick In Panels/Doors Clear float toughened glass 6mm thick 8mm thick 10mm thick 12mm thick Tinted float toughened glass 6mm thick 8mm thick 10mm thick 12mm thick SPECIAL GLASS Mirrors Polished plate glass mirror with copper backing plugged to wall including chromium plated mirror screws and felt washers
m m
14.82 22.27
14.82 22.27
14.82 22.27
14.82 22.27
14.82 22.27
A B C D
m2 m2 m2 m2
E F G H 2 2.1
m2 m2 m2 m2
A B C D
3mm thick clear mirror 3mm thick tinted mirror 6mm thick clear mirror 6mm thick tinted mirror Bevelling to straight or circular edges including internal mitres and scallops
m2 m2 2 m m2
E F G
m m m
Page 31/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
X 1 1.1
PAINTING PAINT APPLICATION General Surfaces Painting concrete or plastered surface and the like
A B C
two coats of cement paint two coats of water repellant solution one base coat of cement paint, one undercoat and one finishing coat of acrylic emulsion paint
m2 m2 m2
Painting concrete or plastered surface and the like D one coat of anti-alkali sealer, one undercoat and one finishing coat of PVA based emulsion paint one coat of oil based anti-alkali sealer, one undercoat and one finishing coat of acrylic emulsion paint one coat of epoxy primer and one coat of polyurethane paint one coat of latex primer and two finishing coats of alkyd semi-gloss enamel paint one coat of metal primer and 2 coats of enamel paint one undercoat and two finishing coats of gloss oil paint one coat of primer sealer and three finishing coats of PVA based emulsion paint one undercoat two finishing coats synthetic emulsion paint two finishing coats of epoxy paint one coat of primer sealer and two finishing coats of emulsion paint spray applied two coats of `Flakeline 251' flake reinforced Bisphenol polyyester resin based lining two coats of `Sandtex Matt' one coat of primer sealer, one body texture coat and one finishing coat of polyurethane finish one undercoat and two finishing coats of weathershield emulsion Lenaluck acrylic texture spray coating finishes one undercoat and two finishing coats of gloss enamel three coats of `Methalack-C' coating system m2 3.68 3.65 3.65 3.65 3.68
m2
4.63
4.63
4.63
4.63
4.65
F G H I J K L M N
m2 m2 m2 m2 m2 m2 m2 m
2
m2
O P
m m
2 2
12.71 10.82
12.71 10.82
12.71 10.82
12.71 10.82
12.71 11.00
Q R S
m2 m2 m2
Page 32/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
1.1 T
General Surfaces one coat of plaster sealer, one undercoat and two coats of solvent based acrylic coating one undercoat and one finishing coat with transparent clear coating of `Cemetex' glazed coating m
2
3.91
3.91
3.91
3.91
3.94
m2
3.36
3.36
3.36
3.36
3.36
1.2
A B C D
two coats of aluminium wood primer two coats of wood preservative painting wrought woodwork surface two coats of stain and two coats of wax polish two coats of varnish Painting timber surfaces one coat of aluminium wood primer, one undercoat and two finishing coats of synthetic enamel paint one coat of stain and three coats of clear polyurethane two coats staining, varnishing three coats of translucent finish on wood Metal Surfaces Painting on metal surface two coats of aluminium paint one undercoat and two finishing coats of synthetic enamel paint two coats of zinc chromate primer, one undercoat and two finishing coats of synthetic enamel paint one coat of intergard EPA 500/EPA 5001 anticorrosive primer, one undercoat of intergard EPA 003/EPA 746 Mastic Mio aluminium and one recoatable finishing coat of series/PQA 015 or other similar approved paint
m2 m2 m2 m2
m2
9.10
9.10
9.10
9.10
9.10
F G
m2 m2
9.63 10.10
9.63 10.10
9.63 10.10
9.63 10.10
9.63 10.10
1.3
A B C
m2 m2 m2
m2
45.74
45.74
45.74
45.74
45.74
1.4
Weldmesh Surfaces Painting on both sides of weldmesh (measured flat on one side)
A B C
two coats of aluminium paint one undercoat and two finishing coats of synthetic enamel paint two coats of zinc chromate primer, one undercoat and two finishing coats of synthetic enamel paint Cast Iron Pipe Surfaces Knot and apply two coats of aluminium primer, one undercoat and two finishing coats of synthetic enamel paint
m2 2 m m
2
9.54 14.13 -
9.54 14.13 -
9.54 14.13 -
9.54 14.13 -
9.56 14.18
1.5
A B
m m
2.33 2.84
2.33 2.84
2.33 2.84
2.71 3.38
2.54 3.51
Page 33/34
ITEM
DESCRIPTION
UNIT
2010Q1 MEAN
2010Q2 MEAN
2010Q3 MEAN
2010Q4 MEAN
2011Q1 MEAN
1.6
Galvanised Pipe Surfaces Two coats of zinc chromate primer, one undercoat and two finishing coats of synthetic enamel paint
A B 1.7
small pipe large pipe Copper Pipe Surfaces One coat of etch primer, one undercoat and two finishing coats of synthetic enamel paint
m m
2.15 2.63
2.15 2.63
2.15 2.63
2.31 2.88
2.34 2.94
A B 1.8
small pipe large pipe UPVC Pipe Surfaces One coat of polyvinyl acetate primer, one undercoat and two finishing coats of synthetic enamel paint
m m
1.66 2.15
1.66 2.15
1.66 2.15
1.81 2.34
1.87 2.41
A B 1.9
small pipe large pipe Fire Protection Provide and spray vermiculite to general surface
m m
2.38 2.89
2.38 2.89
2.38 2.89
2.54 3.04
2.54 3.04
A B C
13mm thick 25mm thick 50mm thick GPG fire rating compound generally Mandolite P20 2 hours fire protection beam girders `Blobest-RS' 2 hours fire protection beam Labour Supply labour to prepare and apply paint on
m2 m2 m2
m2 -
m2
42.06
42.06
42.06
42.06
44.77
F 2.0
m2
42.06
42.06
42.06
42.06
44.77
A B C D E
concrete or plastered surface timber surface metal surface large pipe surface small pipe surface
m2 m2 m2 2 m m2
Page 34/34