You are on page 1of 87

At Lacy West Supplies we strive to provide the best tools at the most competitive prices.

Our tools are for manufacturers, tradesmen and retailers in the jewellery micro industry areas. Our knowledgeable and friendly staff will be happy to assist you with stock or special order items. Over the years we have become distributors for most, if not all, of the major and minor brands in the jewellery area. We carry a full stock of 18,000 items and can access many more on a special order basis.

L A C Y W E S T S U P P L I E S LT D . (

since 1991 )

Accounts are available on approved credit. Phone for credit application. In addition, as a Canadian company we can provide the convenience of leasing programs in Canadian or U.S. funds. Thank you for your continued support. Prices are subject to change due to increases in cost of raw materials, fuel surcharges, currency fluctuations and customs duties.

102 - 480 SMITHE STREET, VANCOUVER BC V6B 5E4 Toll Free Canada 1-800-667-4118 Phone: 604-669-5229 or 604-628-1839 / FAX: 604-628-4480 Email: lacy@lacywest.com www.lacywest.com

Disclaimer - Please note: The description and picture representations in this catalogue resemble the actual product as closely as possible. However, because of product improvements, specifications will sometimes vary. We reserve the right to correct any errors in the catalogue.

8:30am - 4:30pm Monday to Friday Fax - 24 Hours

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

COARSENESS EXTRA COARSE COARSE MEDIUM MEDIUM FINE

GRIT 3 2 1 0

ABRASIVES
MESH 180 240 280 320

EMERY PAPER Sheets (9x11 inches) T414 Blue Back (413Q)


Order by Grit - Sheets $1.25 Each Box of 50 Sheets $49.95 Waterproof paper backing/curl resistant

COARSENESS FINE EXTRA FINE EXTRA EXTRA FINE XXX-FINE

GRIT 1/0 2/0 3/0 4/0

MESH 400 500 600 800

Premium, ultra fine silicon carbide abrasive Strong resin bond system Waterproof paper backing/curl resistant. Ideal for platinum!
Order by Grit - Sheets $1.75 Each 3MBlue/1 3MPink/1 #11271

NORTON BLACK ICE T402 (401Q 3M) Waterproof Sheets Grits - 1000 1200 1500 2000 2500
Box of 50 Sheets $69.95 Blue Pink Green

Order by Grit - Sheets $1.95 Each

Larger Sheets 9 x 13 inches Grits # 1, 2 , 3 , 3/0 , 2/0 , 4/0

GRITS - 120 220 240 280 320 360 400 500 600

Waterproof paper backing/curl resistant

Box of 100 Sheets $153.95

Code

WET OR DRY POLISHING PAPER Grit Color Price


9u Micron 3u Micron 400 Grit

#17870 #17871 #17875 #17876

Code

Fine Medium Fine Medium

Grit

NORTON MATTE FINISH DE-BURRING WHEELS


3 3 1 1

Polishing sheet which creates a super fine finish. Bulk pack available.

$1.95 ea $1.95 ea $2.95 ea

Size

$16.95 $16.95 $ 5.95 $ 5.95

Price

Code

CARTRIDGE EMERY ROLLS - Aluminum oxide abrasive


#1101270 #1101271 #1101272 #14617

Grit

Uses - Industrial, Dental, Goldsmith, Hobbyist. Discs must be mounted on screw mandrels. You can mount as many discs as you require on the 3/4 or 1 inch wheels. No compounds are required. Wear eye protection 5,000 RPM to 30,000 RPM.

Code

#332581 #332582 #332583 #332584 #332586 #332585

Grit

Mini screw mandrels available for mounting with use on flex shaft. Several styles $1.95 each

RADIAL BRISTLE DISC Dia/Hole

FINE MED COARSE MANDREL

Size

1 LENGTH 1 LENGTH 1 LENGTH 1/8 Shank

Qty

25PC 25PC 25PC 1 PC

Price
$10.95 $10.95 $10.95 $ 3.95

80 220 400 Pumice 1 Micron 6 Micron

Type

L A C Y WE ST SUPP LIES LTD. 604-669-5229

- CALL TO SPECIAL ORDER ITEMS www.lacywest.com

XCoarse Coarse Medium Fine XFine XXFine

*Assortment kit: 3/4 Assortment #332-597 $69.95 *Master Kit: 72 pieces & 4 mandrels #332-595 $79.95 Yellow Red Blue Pink Green Peach

Color

3/4/1/16 3/4/1/16 3/4/1/16 3/4/1/16 3/4/1/16 3/4/1/16

$11.95 $11.95 $11.95 $11.95 $11.95 $11.95

Price

(12 (12 (12 (12 (12 (12

Qty

pack) pack) pack) pack) pack) pack)

Toll Free 1-800-667 - 4 11 8

ABRASIVES
PACIFIC ABRASIVES, ITALIAN SILICONE POLISHERS

DARK GREY - Coarse/Flexible #G17820 - 7/8 Square Edge - $12.95 (20) #G27820 - 7/8 Knife Edge - $12.95 (20)

For Gold, Silver and Acrylic:

WHITE - Hard #GA7820 - 7/8 Square Edge - $12.95 (20) #GB7820 - 7/8 Knife Edge - $12.95 (20)

DARK BLUE - Coarse Pre-Polisher Soft #PPG1 - 7/8 Square Edge - $12.95 (20) #PPG2 - 7/8 Knife Edge - $12.95 (20) LIGHT BROWN - Pumice #R46S4P - 7/8 Square Edge - $13.95 (20) #L41S4P - 7/8 Knife Edge - $13.95 (20)

For Precious & Semi-Precious Metals:

Pumice Wheels:

PINK - High Shine #GF47820 - 7/8 Square Edge - $14.95 (20) #GF57820 - 7/8 Knife Edge - $14.95 (20)

#BR25 - Brown Med. Soft - $19.95 (25) #GN25 - Green High Shine - $19.95 (25)

Silicone Point 3MM:

#23400 - Pumice Flour 200 mesh $ 9.95 (1lb) #23401 - Pumice Fine 150 mesh $10.95 (1lb) #23402 - Pumice Medium 80 mesh $ 9.95 (1lb) TIN OXIDE - USED FOR LENS POLISHING & OTHER GLASSWARE, AS WELL AS FINE STEEL. #47516 - Tin Oxide Powder $26.95 (1lb) #47516/1 - Tin Oxide Powder $ 5.95 (1oz) RUBY POWDER - GIVES A HIGH LUSTER TO PLATINUM, GOLD, STEEL, PRECIOUS STONES, PEARL, IVORY, HORN SHELL AND PORCELAIN. #47525 - Ruby Powder $39.95 (1/2lb) #47524 - Ruby Powder $ 6.95 (1oz)

POWDERED COMPOSITIONS

TOPSTAR - SWISS EDENTA POLISHERS #AT06403 - Brown - Fine - $15.95 (10) - $2.00 each

(on mandrels) #243KM - Grey/White - Step 1 -`$2.00ea #243KF - Pink - Step 2 $2.00ea $2.00ea #243KS - Grey - Step 3 -

GEMPOL - SWISS EDENTA POLISHERS

Edenta

#C43PUD - BLUE - Coarse - $29.95 (12) #C43PIU - GREY - Fine - $29.95 (12) #C43P2F - GREEN - XFine - $29.95 (12) #C43P2L - PINK - High Shine - $29.95 (12)

Inside Ring Cylinder 1 x 1/2:

We are able to supply rubberized abrasives from any of the following brands: DEDECO EDENTA SHOFU CRATEX Please call to special IKFLEX PACIFIC ABRASIVES BRIGHTBOY

Silicon carbide - Soft and flexible for fine polishing of gold and other precious metals. #5007 - 7/8x1/8 - $19.95 (20)

DEDECO - RED FLEXIES (long lasting)

DARK BROWN - Hard #PAC42100 - 2mm $59.95 (100) #PAC4220 - 2mm $14.95 (20) BLUE - Coarse #PAC52100 - 2mm $59.95 (100) #PAC5220 - 2mm $14.95 (20) BLACK - Medium #PAC62100 - 2mm $59.95 (100) #PAC6220 - 2mm $14.95 (20) BROWN - Fine #PAC72100 - 2mm $59.95 (100) #PAC7220 - 2mm $14.95 (20) GREEN - Extra Fine #PAC82100 - 2mm $59.95 (100) #PAC8220 - 2mm $14.95 (20)

Micro Point for Gold & Silver:

PUMICE POWDER - USED FOR SCRUBBING, CLEANING OR POLISHING

order: 1-800-667-4118

Prices in Canadian Funds/Call for confirmation/Prices subject to change.

www.lacywest.com

MINIATURE MANDRELS Designed for use with flexible shaft units and drill presses, etc. Small felt cones, sanding discs, rubberized abrasives and grinding wheels are but a few of the many types of accessories that can be mounted on these mandrels. High quality stainless steel mandrels. Will not bend. Price break on quantities of twelve or more. Made in Germany unless otherwise specified.

M I N I AT U R E M A N D R E L S
D B F G

A - #MAN45003 - $5.95 each - NEW FROM WOLF TOOLS- 1/2 diameter, 4mm shank, stainless steel mandrel for sanding the B - #MAN45002 - $4.95 each - NEW FROM WOLF TOOLS- 3/8 diameter, 3mm shank, stainless
steel mandrel for sanding the inside of rings. (made in USA) C - #MAN45001 - $3.95 each - NEW FROM WOLF TOOLS - 1/4 diameter, 3mm shank, stainless steel mandrel for sanding the inside of rings. (made in USA) ABC - #MAN45000 - SET OF 3 MANDRELS - $11.95 (made in USA) inside of rings. (made in USA)

D F

E - #4013HP6 SWISS - $2.95 each - Tapered split mandrel, 3/32 shank G - #M14315 - $3.95 each - Mandrel for 3mm Rubber Rods, 3/32 shank H I
- #14301 - $1.95 each - Plain screw mandrel, 3/32 shank - #14313 GERMAN - $2.95 each - Moores disc mandrel, 3/32 shank

- #14318 GERMAN - $2.95 each - Straight split mandrel, 3/32 shank

- #14316 GERMAN - $2.95 each - Mandrel for 2mm Rubber Rods, 3/32 shank

J - #43128 - $1.95 each - Plain screw mandrel with reinforced screw, 3/32 shank K - #MAN308 - $1.95 each - Screw mandrel with extra large head, 3/32 shank L - #43160 - $1.95 each - Mandrel for grinding wheels, 1/8 shank N 4 M - #43126 - $1.95 each - Threaded mandrel with nut, 3/32 shank O

- #MAN311 - $1.95 each - Tapered threaded mandrel, 3/32 shank

- #14617 - $3.95 each - Cartridge roll mandrel 1/8x1, #14616 - $3.95each - Cartridge roll mandrel 1/8x1/12

L A CY WEST SUP PLIES LTD. 604-669-5229 Toll Free 1-800-6 6 7 - 4 11 8

www.lacywest.com

EMERY STICKS Round,


#11340 #11341 #11342 #11343 #11344 #11345 #11346 #11347

Half Round & Flat


4/0 Flat 3/0 Flat 2/0 Flat 1/0 Flat #1 Flat #2 Flat #3 Flat #4 Flat $1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95

ABRASIVES
each each each each each each each each

#BUF75198 - Half-Round $10.95 (set of 6 grits) #BUF75398 - Round - $13.95 (set of 6 grits)

GRIT

MITCHELL ABRASIVE CORD/TAPE

FINE MED. COARSE FINE MED. COARSE FINE MED. COARSE FINE MED COARSE

DIAMETER
1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4

MANDRELS FOR NO-LAP BANDS $2.95EACH $14.95 EACH BOXES OF 100

NO-LAP ABRASIVE BANDS


ITEM
#11217 #11218 #11219 #11220 #11221 #11222 #11223 #11224 #11225 #11226 #11227 #11228

QTY
10 10 10 10 10 10 10 10 10 10 10 10

PRICE
$1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95

#11435 - 7/8 x 3/32 #11435/12 - 7/8 x 3/32 #11433 - 3/4 X 1/8 #11433/12 - 3/4 x 1/8 #11429 - 5/8 x 3/32 #11429/12 - 5/8 x 3/32 -

MIZZY HEATLESS WHEELS

CORD AIO AIO CRO CRO CRO

AIO = ALUMINUM OXIDE (for cutting) CRO = CROCUS ULTRA-FINE IRON OXIDE (for finishing) STYLE WxTHICK GRIT ITEM TAPE #56 .093x.037 180 #21056 $24.95 AIO #57 .125x.037 180 #21057 $24.95 AIO CRO #56-C .093X.030 Ultra fine #C21006 $24.95 STYLE #54 #53 #55-C #60-C #66-C DIA. .030 .040 .018 .015 .012 GRIT 200 180 Ultra fine Ultra fine Ultra fine ITEM #21054 #21053 #C21055 #C21006 #C21066

$24.95 $24.95 $26.95 $26.95 $29.95

Heatless wheels for grinding plastics & metals.

#1101310 - 7/8 x 0.025 - $9.95 (100) #49891 - Circular saw 7/8 x 0.004 - $3.95ea #SD00625 - Pacific Abrasives Flexible 7/8 x 0.006 - $12.95 (25) (Super Flexies)

SEPARATING DISCS

$1.00 (each) $9.95 (12) $1.00 (each) $9.95 (12) $1.00 (each) $9.95 (12)

MOORES EMERY DISCS


These paper backed flexible discs come with a square arbor hole for use with a snap-on/off mandrel. Speed max. - 30,000 rpm

Combination Stone FINE/COARSE #10452 - 8x2x1 $26.95 #10608 - 4x1x1/2 #10609 - 5x2x7/8 #10610 - 6x2x1 Arkeram
Stones in wood box (made from Arkansa stone powder)

SHARPENING STONES

Arkansas TRUE HARD in cedar box. #XAB42C - 4x2x1/2 $49.95 #XAB62C - 6x2x1/2 $69.95 Arkansas HARD stone in cedar box. #10551 - 4x2x1/2 $19.95 #10555 - 6x2x1/2 $29.95 Arkansas Translucent XFINE boxed. #10552 - 4x2x1/2 $61.95 #10554 - 5x2x1/2 $75.95 #TAP14AL - 4x1x1/4 $39.95
(with leather pouch)

$29.95 $39.95 $49.95

#1/2EC - Coarse 1/2 - $5.95 (50) #1/2EM - Medium 1/2 - $5.95 (50) #1/2EF - Fine 1/2 - $5.95 (50)

#3/4EC - Coarse 3/4 - $5.95 (50) #3/4EM - Medium 3/4 - $5.95 (50) #3/4EF - Fine 3/4 - $5.95 (50)

#5/8EC - Coarse 5/8 - $5.95 (50) #5/8EM - Medium 5/8 - $5.95 (50) #5/8EF - Fine 5/8 - $5.95 (50)

#7/8EC - Coarse 7/8 - $5.95 (50) #7/8EM - Medium 7/8 - $5.95 (50) #7/8EF - Fine 7/8 - $5.95 (50)

COARSE - Gross reduction & shaping. MED. - Less reduction, smoother finish. FINE - Polishing smoothest surface.

10% DISCOUNT ON A CARTON (12 BOXES OF 50)

Primarily used as sharpening oil, but can be used as a general purpose machine oil. Net Contents 4-1/2 oz. Metal can.

NORTON PIKE OIL - Graver sharpening oil


Swiss

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

Ruby Bench Stones - For sharpening & flattening hard metals, as well as glass, quartz & porcelain. #10422 - 4 3/4x2x3/8 FINE $139.95 #10421 - 4x1x3/8 - MED.
$129.95

EDENTA - Diamond-Coated Wheel-Shaping Block Customize & renew your rubber & silicon grinding points & wheels. #4060DIA - $69.95

#42480 - $9.95

www.lacywest.com

DIAMOND SETTERS CEMENT


Melted & applied to a wooden dowel, it securely holds bracelets & rings for setting.

A D H E S I V E S

Lapidary-grade hard dop wax has a melt temperature of 160F.

SUPER-HARD DOP WAX


#206054 - $11.95

#12208 - $29.95

(4x4x5/16 - 1/4lb)

For making and repairing jewellery. Bonds: fiberglass, glass, ceramics, plastic, metal and wood. Clear, colorless and sets in four minutes.

VIGOR JEWELLERS EPOXY


#120451 - $5.95

Use the opaque stick to set stones or to temporarily hold work. The transparent stick inconspicuously fills holes, dents, & scratches.

SHELLAC STICKS
Heat to apply (7 in length).

(four 4oz sticks)

For repair and assembly of glass, metal, plastic, rubber and ceramic. Sets in 45 to 60 seconds.

VIGOR SUPER GLUE PEN


#12218 - $2.95

#12230 - Opaque - $11.95 #12231 - Transparent - $14.95

Seals packages & envelopes securely and efficiently. Also excellent as a setters cement. Melting point 170degrees.

SEALING WAX

For use with plastic, glass, watch crystal and bezels. Comes with pin-point applicator for precision application, great for use when beading. #10500 - $5.95

G-S HYPO CRYSTAL CEMENT

EPOXY 220 - Amber-Clear glue, line


bonds with a slow setting time for production bonding of gem materials to metal findings. EPOXY 330 - Water-Clear glue, line bonds with fast setting time.

Excellent way to pick up stones and other small items. Ideal for setting, leaves no marks on stones.

DIAMOND DOPPING WAX


#206050 - $4.95

#12225 - $14.95

(4 bars - 1/4 lb)

#220 - $5.95 #330 - $6.95

Melts easily and is used to attach items in boxwood slips for engraving. Can be cleaned with alcohol.

CHASERS CEMENT
#12203 - $35.95 (2 x 1/2lb)

Non-drip spout and transparent in color. Dries in approximately 30 seconds and will not drip or bleed.

ELFY SUPER GLUE


#80800 - $2.95

Holds objects for chasing, engraving, or setting. Heat to apply.

ORANGE SHELLAC
#99919 - $8.95

Dissolves cured epoxy & polyester resins. Use on glass, metal, stone and wood.

ATTACK 8OZ
#38325 - $12.95

OPTICON FRACTURE SEALER


A two part epoxy that penetrates hairline cracks, and is very effective for sealing fractures in stones.

#206033 - $29.95 (9oz set)

L A C Y WES T S UPP LIES LTD. 604-669-5229

Create custom handles for your pliers, gravers and other tools. Softens with heat. 11816 - $42.95 1 lb A general purpose securing material.

JET SETT Fixturing Compound

Softens with heat to a pliable clay-like consistency that you form around your work. Reusable time after time.

Work Holding Plastic


Starter Kit -

THERMO-LOC

#003-667 -

$37.95

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

We also carry BUSCH BURS!

MAILLIFER
HART 90 SETTING

BURS
CUP

PACKS

TUNGSTEN
= $3.95
EACH

VANADIUM
POINTED CONE

16.667% - DISCOUNT ON PACKS OF SIX BURS!!

STEEL

0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.95 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.3 3.5 3.7 4.0 4.2 4.5 4.7 5.0

MM

BALL

$ each

1.79 1.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.79 1.79 1.79 1.79 1.79 3.99 3.99 3.99

0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.3 3.5 3.7 4.0 4.2 4.4 4.5 4.6 4.7 4.8 5.0

MM

$ each

1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 3.99 3.99 3.99 3.99 3.99 3.99 3.99 3.99 3.99 3.99 4.95 6.39 6.39 6.39 6.39 6.39 6.39 6.39 6.39

MM

0.9 1.0 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.7 2.9 3.0 3.1 3.3 3.5 3.7 4.0 4.2 4.5 4.7 5.0 5.5 6.0 6.5 7.0 7.5 8.0

$ each

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 3.59 3.59 3.59 3.59 3.59 3.59 3.59 3.59 5.49 5.49 5.49 5.49 5.49 6.79 6.79 6.79 6.79 6.79 6.79

MM

MM

1.0 1.2

KRAUSE

$ each

3.55 3.55

1.8 2.1 2.3

MM

REAMER

$ each

9.95 9.95 9.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

0.9 1.0 1.2 1.3 1.4 1.6 2.0 2.3 2.5 2.7 2.9 3.0 3.5 4.0 5.0

MM

HART SHALLOW

$ each

1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 3.99 3.99 3.99 3.99 3.99 3.99 3.99

WAX BURS

#JX1450 #BV255 #BV256 #BV953H #JX1415 #JX1420 #JX1425 #JX1430 #JX1435 #JX1500 #JX1510 #JX1520 #Q235S #SFISET

16.667% - DISCOUNT ON PACKS OF SIX BURS!

- Deluxe Carving Kit - Ball Bur Set - Ball Bur Set of 12pc - Hart Bur Set of 12pc - Bud Bur Set - Hart Bur Set - Jumbo Ball Bur Set - Twist Drill Set - Jumbo Wheel Bur Set - Assorted Bur Set - Finishing Bur Set - Diamond Bur Set - Setting Bur Set of 15pc - Cup Bur Set of 14pc

0.8 0.9 1.0 1.1 1.15 1.2 1.25 1.3 1.375 1.4 1.5 1.6 1.65 1.7 1.75 1.8 1.9 2.0 2.1 2.2 2.3 2.5 2.7 2.9 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0

$ each

2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.99 2.99 2.99 2.99 2.99 4.79 4.79 4.79 7.95 7.95 7.95 7.95 7.95 7.95 9.95 9.95 9.95 9.95

MM

0.6 0.7 0.8 0.9 1.0 1.2 1.4 1.5 1.6 1.8 2.1 2.3 2.5 2.7 2.9 3.1 3.3 3.5 3.7 4.0 4.2 4.5 4.7 5.0

BUD

$ each

1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 3.39 3.39 3.39 3.39 3.39 3.39 3.39 6.39 6.39 6.39 6.39 6.39

MM

0.5 0.6 0.7 0.8 0.9 1.0 1.2 1.4 1.5 1.6 1.7 1.8 2.0 2.1 2.2 2.3 2.5 2.7 2.9

INVERTED CONE

$ each

0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 1.59 1.59 1.59

MM

0.8 0.9 1.0 1.2 1.4 1.6 1.8 1.9 2.1 2.3

$ each

MM $ each

1.5 2.5 5.0


MM

CONE 30degree 2.69 3.88 5.75

0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79

MM

MM

BUR & BLADE LUBRICANT #19928 $4.95


$19.95 $19.95 $36.95 $39.95 $44.95 $44.95 $59.95 $29.95 $59.95 $41.95 $35.95 $59.95 $49.95 $39.95

0.7 0.8 0.9 1.0 1.2 1.3 1.4 1.5 1.6 1.8 2.1 2.3 8.0

CONE SQUARE CROSS CUT $ each

1.0

CONE 60degree

0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.6 1.8 2.1 2.3 2.5 2.7 2.9 10.0

WHEEL

$ each

1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 11.95

MM

0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0

TWIST DRILLS

$ each

1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99 1.99

$ each

2.69

0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99

MM

MAILLEFER BUR SETS

0.7 0.8 0.9 1.0 1.1 1.2 1.4 1.6 1.8 2.1 2.3 7.0 8.0 9.0

CONE SQUARE

$ each

0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99

1.0 2.0 3.0 4.0 7.0

MM

KE WHEEL
$ each

2.95 2.95 4.95 7.95 9.95

MM

MM

7.0 5.95 8.0 5.95 9.0 11.95 10.0 12.95

ROUND WHEEL

$ each

0.7 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.1 2.3

CYLINDER SQUARE
$ each

0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99

MM

BUR ORGANIZER #19927 $25.95

1.0 2.00 1.5 2.00 2.0 2.00 2.5 3.50 3.0 3.50 3.5 3.50 4.0 4.50 5.0 4.50 6.0 5.95 7.0 5.95 8.0 9.95 9.0 9.95 10.0 12.95

CYLINDER WHEEL

MM

$ each

0.7 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.1 2.3 2.5

CYLINDER SQUARE XCUT

$ each

PEARL DRILLS $6.95


EACH

0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 2.95

www.lacywest.com

#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16

CODE

HSS 90 DEGREE BEARING BUR


1.05 1.20 1.35 1.50 1.70 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.80 4.00
MM SIZE

H I G H S P E E D B U R S HSS
PRICE

HSS SETTING BUR


1.05 1.20 1.35 1.50 1.70 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.80 4.00 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 5.95 5.95 5.95 6.95
PRICE CODE

4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 6.95

PRICE

CODE

#17 #18 #19 #20 #22 #23 #24 #25 #26 #27 #28 #29 #30 #32 #34

4.30 4.50 4.70 5.00 5.20 5.40 5.60 5.90 6.30 6.70 7.20 7.60 8.00 9.60 11.00

MM SIZE

6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95 7.95 7.95 7.95 7.95 8.95 8.95 9.95

CODE SIZE PRICE

HSS 45 DEGREE BEARING BUR


1.20 1.35 1.50 1.70 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.80 4.00
MM

#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16

MM CODE SIZE

#5 1.70 #8 2.30 #13 3.30 #16 4.00 #19 4.70 #26 6.30 #30 8.00 #34 11.00
CODE

CODE

HSS CYLINDER BUR INSIDE RING BUR


MM SIZE PRICE $

#17 4.30 6.95 #18 4.50 6.95 #19 4.70 6.95 #20 5.00 6.95 #22 5.20 6.95 #23 5.40 6.95 #24 5.60 6.95 #25 5.90 6.95 #26 6.30 7.95 #27 6.70 7.95 #28 7.20 7.95 #29 7.60 7.95 #30 8.00 8.95 #31 8.90 8.95 #32 9.60 8.95 #33 10.40 10.95 #34 11.00 10.95

MM SIZE

PRICE

CODE

#47 #48 #50 #51 #52 #53 #54 #55 #56 #57 #58 #59 #60 #61 #62 #63 #64

HSS TWIST DRILLS


MM SIZE

#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16

4.95 4.95 4.95 4.95 4.95 4.95 4.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 6.95

CODE SIZE PRICE

#17 #18 #19 #20 #22 #24 #26 #28 #30 #34

#19316 - 24PC SET $144.95 #55A - 17PC SET $109.00

4.30 4.50 4.70 5.00 5.20 5.60 6.30 7.20 8.00 11.00

MM

6.95 6.95 6.95 6.95 6.95 6.95 7.95 7.95 8.95 9.95

CODE

PRICE: PRICE: PRICE: PRICE:

#2 #4 #8 #10 #14 #16 #20 #22

HSS FLAME BUR 1.20 1.50 2.30 2.70 3.50 4.00 5.00 5.20
MM SIZE PRICE $

4.95 4.95 5.95 6.95 6.95 7.95 8.95 9.95

WE ALSO CARRY AN EXTENSIVE LINE OF SWISS EDENTA CARBIDE BURS IN VARIOUS SHAPES AND SIZES.

#47-#70 #71-#73 #74-#78 #79-#80

2.00 1.93 1.77 1.70 1.61 1.51 1.39 1.32 1.18 1.09 1.07 1.04 1.02 1.00 0.96 0.94 0.91

CODE

= = = =

$1.60 $1.70 $1.80 $2.00

#65 #66 #67 #68 #69 #70 #71 #72 #73 #74 #75 #76 #77 #78 #79 #80

EACH/$16.00 EACH/$17.00 EACH/$18.00 EACH/$20.00

0.89 0.84 0.81 0.79 0.74 0.71 0.66 0.64 0.61 0.57 0.53 0.50 0.45 0.40 0.36 0.34

MM SIZE

DIAMOND TWIST DRILLS


PRICE(ea)

#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17

1.05 1.20 1.35 1.50 1.70 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.80 4.00 4.30

MM SIZE

HSS BALL BUR


3.95 3.95 3.95 3.95 3.95 3.95 4.95 3.95 4.95 4.95 4.95 4.95 5.95 5.95 5.95 5.95 5.95
PRICE CODE

HSS BUR SETS

#18 #19 #20 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34

4.50 5.95 4.70 5.95 5.00 5.95 5.20 6.95 5.40 6.95 5.60 5.95 5.90 5.95 6.30 6.95 6.70 6.95 7.20 6.95 7.60 7.95 8.00 7.95 8.90 9.95 9.60 9.95 10.40 10.95 11.00 8.95

MM SIZE

PRICE

SIZE(mm)

0.9 1.0 1.2 1.3 1.4 1.6 1.8 2.1

6.95 6.95 6.95 6.95 6.95 6.95 6.95 6.95

CODE

Doz Doz Doz Doz

20pc DIAMOND BUR SET


MADE IN INDIA

$15.95

#19311 #19312 #19313 #19315 #19316 #19318 #19319 #19321 #19322 #19325 #19333 #19334 #19336

SHAPE

Ball Ball Ball 45 Bearing 45 Bearing 90 Bearing 90 Bearing Bud Bud Cone Setting Setting Setting

BUR #'S.

MM CODE SIZE

LA C Y WEST SUP PL IES LTD. 604-669-5229

4.95 4.95 4.95 5.95 6.95 6.95 6.95 6.95

#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12

1.20 1.35 1.50 1.70 1.90 2.10 2.30 2.50 2.70 2.90 3.10

PRICE $

4.95 4.95 3.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95

HSS BUD BUR


CODE

ASSORTED SIZES
MADE IN CANADA

1-15 1-30 1-34 2-28 2-34 2-28 1-34 2-18 2-34 2-34 1-30 1-34 1-26

$61.95 $149.95 $169.95 $89.95 $144.95 $79.95 $199.95 $71.95 $139.95 $129.95 $159.95 $199.95 $139.95

PRICE

*1.5mm - $9.95 *2.0mm - $9.95 *2.5mm -$10.95

DIAMOND CORE DRILLS


DIAMOND

#13 #14 #16 #18 #20 #22 #26 #28 #30 #34

3.30 5.95 3.50 5.95 4.00 5.95 4.50 5.95 5.00 6.95 5.20 6.95 6.30 6.95 7.20 6.95 8.00 7.95 11.00 10.95

MM SIZE

PRICE $

3MM SHANK

#F903 #F1203 #F1303 #F1503 #F1803 #F904 #F1204 #F1304 #F1504 #F1804

DIAMOND FLYWHEELS
ANGLE

4MM SHANK

ANGLE

90 120 130 150 180 90 120 130 150 180

PRICE $

PRICE $

89.95 89.95 89.95 89.95 89.95 89.95 89.95 89.95 89.95 89.95

LUBRICANT TO PROLONG LIFE.

COOLED BY WATER OR OTHER

BURS SHOULD BE

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

#49891 7/8 $9.95 each #49891/12 7/8 $49.95 dozen

CIRCULAR SAWS

NEUTECCASTING SUPPLIES
NEUTEC/USA GRAPHITE CRUCIBLES FOR J-2R High-quality graphite; use 8mm-hole crucible for 1/4 sprues and very fluid alloys. Use 9.5mm - hole crucible for 3/8 to 1/2 sprues and alloys. J-2R 60x8mm hole 710192 $54.95 J-2R 60x9.5mm hole 710193 $54.95 CRUCIBLE STAND FOR 60MM CRUCIBLE Crucible platform/insulator. Ceramic fibre. Package of 3 Series 111,1V 710090

Replacement o-ring for gasket recess area of flask adapters. Forms a seal between flask adapter and flask flange. Package of 6 111,1V 710545 $15.95 2.5 inch 111,1V 710560 $16.95 3 inch 3.5 inch 111,1V 710561 $19.95 4 inch 111,1V 710562 $32.95

FLASK ADAPTER INSIDE O-RING FOR J-2R

J-2R

$79.95

J-2R

STIRRING RODS Solid graphite rod fits in stirring rod holder inside hood for metal stirring. Package of 10. Series 1,11,111,1V 710034

O-Ring (rim)

FLASK ADAPTER OUTSIDE-RIM O-RING J-2R Replacement rim O-ring for flask adapter. Package of 6. 710197 $42.95

FILLING CONE New and improved. Longer lasting metal loading guide. Interlocks with casting crucible to eliminate metal spillage. Insulating material to reduce heat loss. Package of 2. Series 1,11,111,1V 710191 $98.95

$44.95

O-RING LUBRICANT Silicone lubricant for flask adapter o-rings. Use on all o-rings for maximum performance. 150 gram tube. Prevents o-rings from swelling. 710217 $32.95 3 4 5 6 7 9 NEUSPRUES WAX-SPRUES 30 PC. per package 71089630 $31.95 71089730 $31.95 71089830 $32.95 71089930 $34.95 71090030 $35.95 71090230 $39.95

FLASK ADAPTER Flask adapters for perforated flasks. Seals and centres flask in the flask chamber. Series Code Price Size J-2R 4 inches 111,1V 710198 $324.00 J-2R 3.5 inches 111,1V 710199 $317.00 J-2R 3 inches 111,1V 710200 $312.00 J-2R 2.5 inches 111,1V 710099 $312.00 We also carry consumables for J-z, J-zp, J-zp Autocast your Canadian Neutec Dealer.

Also available in boxes of 120 sprues. NEUSPRUE BASE ASSEMBLY 710907 710908 710910 710911

2.5 inches 3 inches 3.5 inches 4 inches

Includes a Neusprue rubber base and plastic holder with screw.

$6.95 $6.95 $7.95 $7.95

J-2R

CRUCIBLE BOTTOM GASKET Carbon-impregnated ceramic fiber insulating gasket and oxygen leach preserves crucible life. Package of 6. 60mm OD 710340 $26.95

Tree Fixture

Fully adjustable for just the right working angle. It tilts up or down and rotates 360 for perfect visibility and access to all sides. You can either place it on your work surface or permanently attach it using the built-in tabs.

NEUSPRUE UNIVERSAL TREE FIXTURE 710894 $75.95

R-46

ONE-PIECE GRAPHITE SEALING ROD One-piece hollow core.Transfers temperature to thermocouple faster than 2-piece rods. Package of 6 pieces 710373

GRAPHITE FLASK GASKETS Package of 6 2-1/2 inches 3 inches 3-1/2 inches 4 inches
For temperatures below 1200 F - 649C. Natural graphite, flexible and strong.

$109.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

710396 710397 710398 710399

$47.95 $87.95 $92.95 $94.95

www.lacywest.com

NEUTECCASTING SUPPLIES
This is the only type light weight oil that should be used with oil seal vacuum pumps. $13.95 21808 Use with Busch pump to extend your warranty by one year. Change your oil every month. J-2R 706016 $15.95

BUSCH VACUUM PUMP OIL 1 QUART GRIFFITH VACUUM PUMP OIL 32oz

NEUTEC/USA CRUCIBLE COOLING JAR Cooling jar allows crucibles to cool fully, protecting them from oxidation deterioration, without interrupting casting operation or compromising safety. Cooling Jar 710527 O-Rings (pkg 3) 710533 $655.95 $ 8.95

5 3

VACUUM PUMP Single phase. Two-stage direct 1/2 110V CFM 110V
CFM CFM CFM

hp motor. Includes 1 qt. oil.

8 3

ARBE VACUUM PUMPS 110V 110V VP-8 VP-3

700350 700364

$695.95 $595.95

Use this non-conductive, heat resistant dispenser for adding casting grain to a hot crucible. 1,11,111,1V 704116 $52.95 White Silicone rubber makes the best seal for flask temperature below 900F/482C. Package of 6

TEFLON METAL DISPENSER J-2R SILICONE FLASK GASKETS J-2R 2-1/2 inches 3 inches 3-1/2 inches 4 inches 710390 710391 710392 710393 Jz

$695.95 $595.95

710364

CASTING THERMOCOUPLE
Type K; NI-Cr-Ni 145mm long. Maximum service is 2200F (1204C)

$120.95

Specially designed to reach down into the flask chamber to grasp the top of a perforated flask. $148.95

NEUTEC/USA J-2R / JZ FLASK TONGS 3 inch 3.5 inch 4 inch 5 inch J-2R 710270 710271 710272 710274

$ 76.95 $ 87.95 $ 95.95 $104.95

Create a leak proof seal on perforated flasks. 1. Slide your hand through the shrink band

card it - no mess or residue! Streamline preparation time and maximize production efficiency.

the band over the flask for a leak-proof fit. 3. Easy removal- simply cut it, peel it off and dis-

and guide it over the flask. 2. A few seconds in a steam dewaxer or use dry heat, shrinks

DISPOSABLE SHRINK BANDS

Packages of 100 3-1/2 inch x 8 inch 4 inch x 6 inch 10 inch

#704117

BROWN FURNACE MARKERS PACKAGE OF 3 - For marking on flasks

ULTRALITE KILN FOR GRANULATION OR PMC

$ 13.95

NEUTEC CRUCIBLE REMOVAL TONGS J-2R Reverse action, inside-grasping Neutec tongs make it easy to remove a hot crucible for quick crucible changes. Use with cooling jar. 1,11,111,1V #710208 $131.95

#710957 /100 #710960 /100 #710964 /100

$14.95 $12.95 $19.95

Perfect for most delicate operations. Drying disc set includes 2 round discs for the kiln and 1 disc for preliminary drying of PMC. Spatula included. Made in USA.

This small, lightweight kiln is designed for firing hard enamel on metals or PMC . Its 3 inch

diameter, ceramic-embedded and recessed element reaches a working temp. of 1500F (815C). #703016 110 volt $264.95

PMC CLAY

10

LA C Y WEST SUP PL IES LTD. 604-669-5229

PMC clay PMC+ clay PMC3 clay PMC3 slip PMC3 slip PMC+ sheet 0.1 thick PMC+ strip 0.1thick

PRECIOUS METAL SILVER CLAY PMC * Price varies due to precious metal market.
31g 28g. 25g 15g 9g 3cm x12cm 3cm x12cm #100990 #100880 #100771 #100772 #100774 #100886 #100887 $57.95 $55.95 $52.95 $29.95 $29.95 $15.95 $17.95

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

CASTING SUPPLIES
This premier casting investment contains debubblizer and is a favorite among the worlds elite jewelers.

SATIN CAST 20

KERR INVESTMENT

$109.95 (100lb) - $19.95 (10lb)

This investment is specially formulated for stone in place casting while offering the benefits of Satin Cast 20.

SATIN CAST DIAMANTE

Contains a higher percentage of cristobalite, allowing for a higher temperature tolerance allowing easier casting of 18 & 19 karat white metals.

SATIN CAST XTREME

$129.95 (100lb) - $24.95 (10lb)

$149.95 (100lb) - $29.95 (10lb)


AQUA GREEN NYC PINK TUFFY GREEN SUPER PINK ACCUCARVE FLEX-PLAST

A platinum investment delivering incomparable surface finish and mold strength. Its high permeability produces crisp, dense patterns while minimizing inclusions.

OPTICAST

Code

#13360 #18428 #16181 #12138 #32456 #F18180

Item

FREEMAN INJECTION WAX FLAKES 1lb Bags (10% Discount on 50 1lb bags)
Inject.temp
65C/150F 68C/155F 73C/165F 65C/150F 79C/174F 68C/155F

$169.95 (77lb)

Flow
High Med. Med. High High Med.

Flexibility
Med. Med. High Low High Highest

Carvebility Shrinkage
Low Low Med. Med. High Med. Low Low Low Low Low Med.

Application

Code #21455 #21454 #28162 #28163 #CastBlue

WAX BEADS 1 lb Bags. Type SUPER RED AQUA BLUE ZIRCONIUM PINK TOURMALINE CASTALDO BLUE (5lb bag) E-Z CAST

Price $12.95 $12.95 $11.95 $11.95 $49.95

WE ARE NOW THE WESTERN CANADIAN DISTRIBUTOR OF RANSOM & RANDOLPH INVESTMENT!

All Purpose. Best Detail Highest Detail. Easy Removal. Large Pieces. Toughest. Bezel Settings. Quickest Solidification Highly Carvable Highest flexibility.

Price
$7.95 $7.95 $7.95 $7.95 $7.95 $7.95

Ultra-Vest MAXX investment - $69.95 per 50lb - $19.95 per 10lb 10% DISCOUNT ON QUANTITIES OF ARBE #10 KAYA CAST - Table top vacuum casting unit SIX OR MORE

- Draws 29.9 of Mercury in 30 seconds. - 9 x 8 bell jar - Comes complete with accessories kit as shown.

- Vacuum assist casting system -

#21810 #21812 #21813 #21814 #21817 #PGB9800

ACCESSORIES FOR VACUUM CASTING MACHINE

Replacement Bell Jar #P192115 - $69.95

#P19210 - $995.00

Black Rubber Pad for investing Red silicon pad 5 1/2 Flask Seal 3-1/2 Flask Seal 4 Flask Seal 5 Bell Jar 9W x 8H

Prices in Canadian Funds/Call for confirmation/Prices subject to change.

PRO-CRAFT VAC-U-COAT Reduces surface tension on wax models when investing. Eliminates bubbles. Spray on wax models before pouring investment. 21795 - $7.95

- Easy to use winding, locking and releasing function. -Crucible melting capacity is 9 T. oz. and can be cast in flasks up to 4W x 4H.insta-balance mechanism for balancing the arm.- The main drive unit consists of heavy duty shaft, spring and bearings surrounded by a protective safety shield. $895.00

NEYCRAFT CENTRIFUGAL CASTING MACHINE

$14.95 $12.95 $6.95 $9.95 $14.95 $89.95

HIGH TEMPERATURE SILICONE GASKETS #15942 #15943 #15944

- Three-in-one invests and casts both perforated and regular flasks under vacuum. - Investing is performed on an 11 x 11 spring supported table with a 9 x 8 bell jar. - Unit accommodates perforated flasks up to 5 in diameter and 7 in height. - Comes complete as shown. - Pump 1/2 H.P 3 CFM - Equipped with Arbe Exclusive EZ-FLOW oil changing system. $1495.95

When flask casting temperature exceeds 593C/1100F. * Regular gaskets available. Kerr Product.
- A dependable broken arm casting machine for all types of jewelry casting. - Precision engineered and built tough to last. - Casts all flask sizes 2-3/8 x 2-5/8 up to 4 x 6. - DRUM AVAILABLE #17764 - $595.00

3-3/8-85mm 4-100mm 5-130mm

$19.95 $21.95 $24.95

KERRLAB CENTRIFICO CASTING MACHINE

PRO-CRAFT Long Arm Centrifugal Machine


Takes flasks up to 3 1/2 in diameter & 5 high. The long 22 3/8 arm provides the extra force neeed for heavier casts.

22365G - Long arm machine only - $595.95 22366G - Long arm with accessorie kit - $739.95

www.lacywest.com

11

Casting Supplies
PARTS AVAILABLE Elements & Controllers Programmable units can be factory set to your specifications. J100

SC2

#9491001 - NeyCraft Oven JFF 2000 - Analog control and one piece molded fiber heating chamber, maximum operating temp. of 1100C. Inside chamber is 9 x 9 x 6 1/2H. $895.00
The Kerr standard electro-melt has an insulated lid to keep oxygen out during melting, a built-in pyrometer, a graphite crucible and stirring rod, and a long-life heating element. The maximum temperature attainable is 2000F. The manual model has a calibrated control dial that lets you increase power by increments. The unit is CE/UL and CUL certified. #31807 - 1Kg - $999.95 - Replacement 1Kg Graphite Crucible - #CU700 - $29.95 - AVAILABLE IN 2Kg and 3Kg - DIGITAL MODELS ALSO AVAILABLE Also Available - Saturn Italian Electro Melt - #CI100 $995.00 - 1Kg

#KLSC2 - Precious Metal Clay Oven SC2 - Inside chamber 8W x 7 3/4D x 5 3/4 H inches 36 lb - Sentry Digital 3-Key temp Control - Max temp. 2000F - BEAD DOOR AVAILABLE $849.00 #KLSC3 - Precious Metal Clay Oven SC3 - Inside chamber 7 3/4W x 8D x 7 3/4H inches 39 lb - Sentry Digital 3-Key temp. Control - Max temp. 2000F. - BEAD DOOR AVAILABLE $1095.95 ELECTRO MELT FURNACE TNFII Sentry 12-Key Controller $695.95 TNFII Sentry Xpress 4.0 3-Key Controller $595.95

#J100 - Small Manual Furnace J-100 - Standard electric furnace designed for small volume. Includes a built-in thermocouple and pyrometer. Temperatures reach a max of 1800F. Inside chamber 14 1/2W x 14D x 18H. - DIGITAL CONTROL AVAILABLE $595.95 #J200 - Large Manual Furnace J-200 - For quick, clean burn-out or slow controlled rises in temperature. Constructed of heavy gauge, galvanized sheet metal. The easily controlled temp. advances from 0 to 500F within 15 minutes, and from 500F to 1100F within 45 minutes. Max temperature is 1800F. Inside chamber 12W x 12D x 8 1/2H. - DIGITAL CONTROL AVAILABLE $795.95

Manual Units use the same basic step-less type of control. Operator can set the oven control knob to the desired temperature setting and the kiln/oven will automatically maintain that set temperature.The setting is changed by the operator. Operator must monitor the unit as unit temp. can drift. Automatic Units will maintain temperature by control set. Steel cased and well insulated. Automatic furnaces can be programmed for burn-out cycles.

- BURNOUT FURNACE OVEN/KILN - FOR CASTING OR ENAMELING - ONE YEAR WARRANTY -

JFF 2000

casting.100% density no pits. Proven to be reliable and easy to use. Oxide -free metal Fast cycles and large capacities. ture control program.

Neutec J2R

Paragon digital kilns are powered by either the 12-key Sentry micro processor or the smaller 3-key Sentry Xpress. The controllers add convenience and accuracy to your firings.

Gives you superior

and accurate tempera-

ever make! Leasing available. Call for current pricing. For more information see page 82.

This is the best investment you will

12

L A C Y WES T S UPP LIES LTD. 604-669-5229

#22949 #22952 #22957

For casting simple metal articles such as jewellery and small sculptures in sand. Preparation of the sand mold is simple and quick and the original pattern or article can be used over and over. Set contains all necessary items (except melting torch): parting powder, 5 lb. can of sand, crucible, crucible tongs, borax, asbestos-free pad, casting flask measuring 4 3/4"H x 3"W x 2"D, and manganese bronze casting metal. Sand casting set Replacement casting flask Sand only $89.95 $12.95 $19.95

COMPLETE SAND CASTING KIT.

The T-2 includes lead wires and type-K thermocouple. Needle indicator (maximum temperature 2200F).

T-2 PYROMETER

An alternative way of casting individual objects, producing a very smooth face and achieving excellent fine detail. Kit includes 2KG of clay, 2 aluminum rings to hold the clay together and an instructional video.

DELFT CLAY CASTING KIT

$169.95

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

#705136 - $119.95

Made of clay bonded fused silica for melting temperatures up to 2800F/1538C. Excellent for melting gold and silver. Available in a variety of sizes. ROUND. Capacity Code Diameter Depth DWT Grams Price #22780 1 3/4 5/8 16 25 $5.50 3/4 19 29 $5.75 #22781 2 1/4 1 25 39 $6.25 #22782 3 1 3/8 35 54 $6.75 #22783 4 #R281 5 1 1/2 40 62 $6.75 Code #22815 #22816 #22470 #22471 #22472 #22473 #22474 Designed for high temperature melting, including metals such as platinum. Style Capacity Straight side 8 oz. High back 10 oz. Small A 1 oz. Large A 3 oz. Slotted A 3 oz. Large D/ key 10 oz. Lrg D/Lrg Orifice 11 oz. Price $29.95 $30.95 $29.95 $32.95 $34.95 $49.95 $51.95

FUSED SILICA CRUCIBLES

CRUCIBLES ETC....
Code 21688 21689 21690 21691 21694 21695 21698 21699 21701 21702

CASTING FLASKS
Dia. 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 1/2 3 1/2 4 4 Height 2 2 1/2 3 4 3 4 4 5 5 6

WESGO CRUCIBLES

Price $6.95 $6.95 $7.95 $9.95 $8.95 $10.95 $14.95 $15.95 $15.95 $19.95

PERFORATED FLASKS
21703 21706 217081 21707 217041 Code

RUBBER SLEEVES
Code 21708 21709 21711 Dia. 3-3/8 4 4 Ht. 4 5-3/4 7

Size Price 4 x 2 4 x 4 $49.95 4 x 5 $51.95 4 X 6 $63.95 4 x 7 $64.95 4 X 8-1/2 $66.95 Price $7.95 $11.95 $15.95 $7.95 $4.95 $7.95 $7.95 $5.95 $11.95 $8.95 $9.95

SPRUE BASES
BUTTON

(larger size flask bases available)

MELTING DISH WITH HANDLE


Code #G5WH #G5 #22798 #G6 #22795 Description Dish with handle Dish only Handle only Large dish only High Back 20oz

Melting dish with wooden handle, dish can be heated to 2800F and can be used with all metals including platinum. Silica-fused dish with clay bond. Price $21.95 $11.95 $10.95 $14.95 $22.95

Code 21825 21824 21826 21827 21828 21829 21781 21782 21783 21784 21780 #21760 #21761 #21762 #21763 #21764

Code #22450 #22452 #22453 #22454(slotted) #CU712 #S2

ca with a clay bond, which will last through many uses. Best choice for metal melting up to 2500F/1371C.

CENTRIFUGAL CASTING CRUCIBLES - Made of fused sili-

RUBBER MIXING BOWLS


Rubber Rubber Rubber Rubber Rubber bowl bowl bowl bowl bowl 3x3 4x4 5x5 6x6 9x9

Style Tree Tree Tree Tree Tree Tree Button Button Button Button Universal

UNIVERSAL TREE SPRUE

Diameter 1-3/4 2 2 1/2 3 3 1/2 4 2 1/2 3 3 1/2 4 fits 2, 2 1/2, & 3

Price $1.95 $2.95 $1.95 $1.95 $2.50 $2.95 $3.95 $2.95 $2.95 $2.95 $4.95 $3.95 $4.95 $5.95 $7.95 $15.95

570881 Crucible/Flask 8 Burno Crucible 57060 Bent Crucible 19 57066 57080 Flask/Crucible 19 57068 Flask Tongs 15 Perforated Flask 99699 Crucible/Flask bent 13 507 Crucible/Flask bent 16 509

FLASK TONGS

99982 99983 99984

NEY SPRUE BASES


2 2 1/2 3 $11.95 $13.95 $29.95

Oz Grams DWT 2.75 77 50 13 372 240 22 620 400 10 279 180 Ney Crucible 9 oz.

#22755 #22756 #22757 Code #22766 #22768 #22769 #22771 #22773

BURNO STYLE CRUCIBLES GRAPHITE CRUCIBLES


Size 4/0 2 3 6 10 Height 3 1/8 4 9/16 5 1/4 6 5/8 8 1/16 25 DWT 50 DWT 100 DWT

Jug Crucible 350 cc - Italian

JUG CRUCIBLE

Price $9.95 $19.95 $19.95 $15.95 $15.95 $27.95 $12.95 $13.95 $15.95 Price $26.95 $39.95 $44.95 $59.95 $84.95

INGOT MOLDS

#21905 #22901 #22902 #M15

STIRRING RODS. -

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

For stirring molten metals. Quartz Stir Rod 12 $24.95 Carbon Stir Rod 9 $3.95 Carbon Stir Rod 12 $5.95 Ceramic Stir Rod $5.95

#P15390 - 2.5kg cast iron ingot mold - $39.95 #P15370 - 1.5kg cast iron ingot mold - $29.95 #P14830 - 85 DTW adjustable sheet mold - $44.95 #P14820 - 250 DTW adjustable sheet mold - $62.95 #P14810 - 175 DTW adjustable sheet mold - $44.95 #P14800 - 120 DTW adjustable sheet mold - $31.95 #22870 - open ingot mold - $11.95 #P14850 - strip ingot mold - $39.95 #P15204 - 5 groove strip open ingot mold - $29.95 #704110 - premium strip ingot mold - $39.95 #NS270 - strip ingot mold - $13.95 #P15203 - cast iron 4 groove ingot mold - $24.95 #P14910 - combo ingot mold 350 DWT - $79.95 #P14900 - reversible ingot mold 175 DWT - $3.9.95 #220501 - wire ingot mold extra long - $30.95 #220510 - wire ingot mold 7 - $16.95 #DP515 - reverse ingot mold, wire & plate - $48.95 #DP500 - 80DWT adjustable ingot mold - $29.95

Required for handling hot flasks and crucibles. A must when working around burnout vents, vulcanizers, and when melting gold. Fully lined inside with soft felt. Sold in pairs. One size fits all. #22753 - Gloves $61.95 #22754 - Mittens $61.95

ASBESTOS-FREE GLOVES FIRE RESISTANT

Looking for something you cant find? Please call us. We have sources worldwide to secure almost any tool required.

Retardant, Air Cushioned, High Heat Welding Glove WLA2900L - $59.95

COMFOflex, Flame

www.lacywest.com

13

CARVING WAX
FERRIS WAX TUBES ALSO AVAILABLE.
Style A -FLAT TOP Dia. Width . 1 . 1-1/8 . 1-1/4 B -OFF-CENTER HOLE 1-1/16. C -SOLID BAR 7/8 . 1-1/16. 1-5/16. D -CENTER HOLE 7/8 . 1-1/16. 1-5/16. -BUY ONE DOZEN ASSORTED WAX TUBES FOR Box 1lb Bar 1/2 lb Bar Size 1-7/16 x 3-1/8 x 6-1/2 1-7/16 x 3-1/8 x 3-3/8 DU-MATT WAX TUBES Height Hole Blue 1-1/8 5/8 CA2690 1-1/8 5/8 CA2693 1-1/4 5/8 CA2696 . 5/8 CA2699 . . CA2702 . . CA2705 . . CA2708 . 5/8 CA2711 . 5/8 CA2714 . 5/8 CA2717 $75.00 ($6.25 EACH) MATT WAX BARS Blue Purple CA2762 CA2761 CA2757 CA2756 Purple CA2691 CA2694 CA2697 CA2700 CA2703 CA2706 CA2709 CA2712 CA2715 CA2718 Green CA2692 CA2695 CA2698 CA2701 CA2704 CA2707 CA2710 CA2713 CA2716 CA2719 Price $7.50 $7.50 $7.50 $7.50 $7.50 $7.50 $7.50 $7.50 $7.50 $7.50 Price $13.95 $ 8.95 $11.95 $11.95 Green CA2770 CA2765 Price $19.95 $11.95 Price $24.95 $24.95 $24.95 $24.95 $24.95 $24.95

CONTAINS THREE 1/6lb BARS IN THREE COLORS: 1/2lb Box 1-7/8 x 1-1/8 x 3-1/8 CA2750 Size Box 1lb Box 1-7/16 x 3-1/8 (Assorted thickness from 1/8 to 1)

CONTAINS THREE 1/6lb BARS OF THE SAME COLOR: 1/2 lb Box 1-7/8 x 1-1/8 x 3-1/8 CA2753 CA2752 .

Green CA2760 CA2755 CA2751 .

MATT WAX SLICES Blue Purple CA2772 CA2771 CA2767 CA2766

1/2 lb Box 1-7/16 x 3-1/8 (Assorted thickness from 1/8 to 1/2) Green CA2775 CA2778 CA2783 CA2786 CA2789 CA2792

MATT WAX RODS Diameter Blue 1-5/16 CA2810 1-3/32 CA2815 7/8 CA2820

Set A B C D E F

(for use with Mini Lathe) Purple Green Price CA2812 CA2811 $12.95 CA2817 CA2816 $12.95 CA2822 CA2821 $12.95 ROUND BARS Pack of 2 $20.95

SMOOTH PRECISION TABLETS Amount of Tablets 3- 4.5mm, 1- 6mm, 1- 8mm, 1- 10.5mm 4- 4.5mm, 3- 6mm 2- 8mm, 2- 10..5mm 8- 4.5mm 6- 6mm 1- 15mm, 1- 22mm

Box of: 20 Pellets

MATT WAX PELLET (for working with Matt Gun) Blue Green Red CA951/1 CA951/2 CA951/5

RING TUBES

Price $11.95

BRACELETS Blue CA2899 Purple CA2898 Green CA2897 $20.95 each 1lb BLOCK

14

LA C Y WEST SUP PL IES LTD. 604-669-5229 Toll Free 1-800-6 6 7 - 4 11 8

#210403 - Silver 1 5/16 x 11 1/4 #210402 - Gold 1 5/16 x 11 1/4

Half Round Flat Tube Off-Centre Ring Tube Large Half-Round Flat Tube -

Flat Top - #CW475 - Silver


#CW474 #210413 #210412 #210417 #210416 #210419 #210418 -

Gold Silver Gold Silver Gold Silver Gold

$9.95 $9.95 $11.95 $11.95 $11.95 $11.95 $14.95 $14.95

#210404 - Gold $20.95 #210405 - Silver $20.95

www.lacywest.com

A hard fast-setting wax. Repairs wax patterns and welds waxes together. Melts at 73C/163F. #00623 -Kerr sticky wax - fifteen sticks - $13.95 #21515 - Grobet sticky wax - 24 sticks - $10.95 A superior wax for build-up. Melts at 73C/163F #00474 - Kerr Blue - 15 sticks - $13.95 #00481 - Kerr Ivory - 15 sticks - $14.95 #21458 - Grobet Blue Hard - $15.95 #21459 - Grobet Blue Regular - $15.95

STICKY WAX

UTILITY WAXES

A creamy wax used to repair wax pattern defects. Fills unwanted voids in wax patterns. Applies easily with finger or tool. #00610 - Kerr disclosing wax - Ivory - $25.95

DISCLOSING WAX

INLAY CASTING WAX

Extremely pliable wax for creating interesting pattern configurations. #00609 - Kerr boxing wax - 170grams - $29.95 A perfect build-up wax that carves easily. Melts at 73C/163F. #11493 - Kerr build-up wax - 1oz - $19.95 Soft, very pliable wax that is easily formed and shaped by hand without the use of heat. Perfect for forming large models. #21655 - 2lb box - (strips 1/4x11/4x24) - $19.95 Soft, easily shaped red wax adheres to practically any surface. Used for building and filling in marred surfaces. #21517 - Wax sticks - $14.95 #21518 - Wax sheets - $13.95 Removes scratches, smooths and cleans wax patterns prior to casting. Acidfree, water-soluble and 100% organic. Fast working. Rub on with cloth and let air dry. Ideal for keeping wax injectors clean.

BOXING WAX

PERFECT PURPLE WAX

Seals packages and envelopes securely. Also excellent as a setters cement. Four Bars - 1/4 lb. #12225 - $14.95 Dissolves in water, making it perfect for use as a core for beads and other hollow items. 1lb chunks. #21520 - soft white for melting and pouring - $10.95 When rubbed on surface, leaves a film on which design can be marked. Also used as a lubricant. #WAX12000 - 1oz bar - $1.95 #26100 - 10z tube, synthetic - $2.95 #26103 - 1lb cake - $13.95 Used to keep wax from sticking to mandrels, work plates or other wax. Also for sawblades, burs, etc..

SEALING WAX

SCULPTURE WAX STRIPS UTILITY WAX

WATER-SOLUBLE WAX BEESWAX

WAX KLEEN

PRO-CRAFT WAX LUBRICANT


#21280 - 8oz bottle - $10.95

A quality solvent and polish for wax and plastic models. #21792 - 4oz - $5.95

GRIFFITH WAXOLVENT

#210806 - 4oz - $7.95

Pliable, blue wax wire, 1/2lb spool. #K11013 - 6 gauge, round $39.95 #K11014 - 8 gauge, round $39.95 #K11015 - 10 gauge, round $39.95 #K11016 - 12 gauge, round $39.95 #K11017 - 14 gauge, round $39.95 #K11018 - 16 gauge, round $39.95 #K11019 - 18 gauge, round $39.95 #K11020 - 20 gauge, round $39.95

WAX WIRE ON SPOOLS

#21470 #210625/14 #21480 #21481 #21482 #21483 #21484 #210625/26

SHEET WAX 4 SQUARE SHEETS - $14.95 per box Pink (Soft) Gauge Green (Firm)
#21471 #210627/14 #21489 #21491 #21493 #21495 #21497 #210627/26 Assorted 14 16 18 20 22 24 26

Ample flexibility and sufficient rigidity make this wax particularly suited for making sprues. Melts at lower temperatures, permitting pattern waxes to be more easily eliminated during burn-out. #21510 - Gauge 8 - Box of 6 sticks - $12.95 #21511 - Gauge 10 - Box of 6 sticks - $12.95

SPRUE WAX

LABORATORY SOLITINE (Kerr wax solvent)


#22324 - 8oz Spray Bottle - $23.95

GAUGE 6 8 10 12 14 16 18

(IN) .162 .129 .102 .081 .064 .051 .040

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

(MM) 4.1 3.3 2.6 2.1 1.6 1.3 1.0

GAUGE CHART

GAUGE 20 22 24 26 28 30

(IN) .032 .025 .020 .016 .013 .010

(MM) 0.8 0.6 0.5 0.4 0.3 0.3

#21532 - Assortment Round - Contains gauges 6,8,10,12,14,16,18, and 20 - $18.95

#21530 - Assortment - Contains gauges 6,8,12, and 14 in half round; gauges 10,14, and 18 round; and gauge 6 half-pear shapes. - $19.95

Gauge 6 8 10 12 14 16 18 20

WAX WIRE (In boxes, contains blue wax wire approx. 4 long)
Half-Round #21540 #21542 #21544 #21546 #21548 ---------------------------Round #21560 #21562 #21564 #21566 #21568 #21570 #21572 #21574 Square #210658/6 #210658/8 #210658/10 #21616 #21618 #21620 ------------------Triangle ----------#210656/8 ----------#210656/12 #210656/14 -------------------------------

Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24 long. #21525 - 1/2 diameter - 1lb - $21.95 #21526 - 1/4 diameter - 2lb - $21.95 #21527 - 3/8 diameter - 2lb - $21.95 Price $9.95 $9.95 $9.95 $9.95 $9.95 $9.95 $9.95 $9.95

EXTRUDED SPRUE WAX

www.lacywest.com

15

WAX TOOLS

Enables you to precisely file shapes, flat or curved, at various angles. Fits the Foredom Handpiece #30 with an adjustable work platform. This feature is designed to simplify the operation while improving performance. Ideal for creating channels. Kit includes rotary files, ring templates, color waxes and an instruction manual. A hand held versatile lathe. Assembles directly to your Foredom Handpiece #30 for all types of turning and milling. You can easily produce bands, bezels, or settings with the tools provided. A stop gauge lets you achieve exact measurements on thickness and diameters. Kit includes lathe, collets, cutting tools, wax rods, wrench and 32 page booklet. FIND REPLACEMENT RODS ON PAGE 14 A unique, precision controlled method to transform pellets into extrusions of different profiles. Different design methods are possible: free form on mandrels, on water, and weaving. Kit contains gun, two brass tips, wrench, three colors of wax and an instruction book. FIND REPLACEMENT PELLETS ON PAGE 14 BLUE PELLETS: For designing on a mandrel or without a support. GREEN PELLETS: For creating graceful models in water. RED PELLETS: For producing flexible threads for weaving. Made of aluminum, with a steel support table, this accessory fits directly on to your handpiece. The table provides support for large or small workpieces and is adjustable for cuts at all angles. A removable fence regulates the depth of cut, ensuring a smooth safe operation. Kit contains accessory with rotary files, template wrench, and instruction booklet. A fixture for sawing wax bars, tubes, and rods to precise lengths. Set consists of aluminum miter box, steel hand saw, and stop lock.

MATT TRIMMER - #CA2880 - $169.95

MATT MINI LATHE WITH GAUGE - #CA2803 - $199.95

MATT WAX GUN KIT - #CA955 - $179.95

MATT SHAPER - #CA2895 - $159.95

MATT MITRE BOX SET - #CA2920 - $69.95

ECONO MITRE SAW SET - #SAW67000 - $19.95 MATT REAMER - #CA2887 - $89.95

Create perfect wax blanks with smooth parallel walls and bore finger sizes. Can also create bezels and coin holders for round diameters. The reamer consists of a precision ground steel rod with a holding knob and two specially designed carbide blades. The wing blade is for planing the tube surface while the boring bit is for the finger size. Enlarge the finger size of wax models evenly and accurately. Slide this tool through the hole in the wax ring tube and rotate clockwise. The embedded steel blade will scrape the inner wall to enlarge the hole. Size 5-12

MATT RING TUBE SIZER - #CA2890 - $29.95 / Econo #1134 - $19.95 WAX RING STAND #487 - $28.95

WAX RING DESIGNING SLEEVE SET #P29550 - $129.95

10 full size aluminum sleeves and 10 half size aluminum sleeves. Sizes range from 4 to 13 1/2. Sleeves sized to allow for metal shrinkage during casting.

Round graduated sizes 1 1/8 in size graduations.

WOLF TOOLS WICKED SHARP WAX CARVING TOOL SET - #700321 - Set of 18 - $199.95 ECONO WAX CARVING SET - #1098 - Set of 12 - $29.95

REVOLVING STEPPED MANDREL #P14600 - $33.95 CERAMIC RING STAND #54131 - $21.95

Rotates a full 360 degrees both vertically & horizontally

16

SWISS WAX FILE SET #33922 - Set of 6$49.95

SWISS GROBET VUL-CRYLIC FILE - #31385 - 7 - $26.95

Hold rings for wax modeling. Swivel base. Rod is easily replaced. Accommodates either ceramic or carbon soldering rod.

L A C Y WE ST SUP P LIES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

- #31384 - 8 - $29.95

WAX WORKING EQUIPMENT


#WI20011/3 - Arbe 1 1/3 Quart Injector with hand pump. #WI20011/3 - Arbe 1 1/3 Quart Injector #WI20123/4 - Arbe 2 3/4 Quart Injector
Features: Steel framed ceramic-mica heating elements. Double sealed no leak nozzle. Zinc plated heavy duty air pressure regulator with easy to read dial. Adjustable bi-metallic thermostat.

ARBE WAX INJECTORS

Digitally controlled, with an attached swing-back lid. The larger well measures 3 L x 2 W and is 3/4 deep. The two smaller wells measure 1 3/4 L x 1 3/8 W x 3/4 D.

3-WELL WAX TRAY WITH LID #21273 - $129.95

$399.95 $379.95 $495.00

ARBE RUBBER MOLD VULCANIZERS VD102 - Standard Vulcanizer - $499.95 Plate Size: 8W x 5D Max Opening: 2 3/4 Max Temp: 550F VD101 - Deluxe Vulcanizer - $795.95 Plate Size: 8 1/4W x 6D Max Opening: 4 Max Temp: 550F DC104 - Dual Control Deluxe - $995.00 Plate Size: 8 1/4W x 6D Max Opening: 4 Max Temp: 550F
Variable heat control and on/off indicator light. Features: Heavy duty aluminum cast construction. Ultra sensitive bulb and capillary thermostat ensure precise and consistent temperature control. Thick aluminum heating plates.

US made, thermostatically controlled electric pot keeps wax at proper temperature for patching and model making. May also be used as wax and resin dip pot for refractory models. Has 1 pint capacity.

PRO-CRAFT WAX POT #21288 - $229.95

For testing wax temperature during the melting process. All metal with an 8 long stem and 2 diameter dial. Readings in both Centigrade and Fahrenheit.

THERMOMETER

Unit switches on/off as one touches the pens collar. Continuous mode switch. Precision temp. control. Immediate heating response. 4 Nichrome tips included. Compact and durable.

PEPE TOUCH-AMATIC WAX PEN #700298 - $189.95 NICHROME TIPS (Set of 9) #700297 - $99.95 REPLACEMENT PEN #P273550 - $59.95 MAX WAX PEN

#2201455 - $19.95

SALE

GILES ELECTRIC WAX PEN

and power switch. Includes battery and micro-tip.

or repair wax models with specially shaped interchangeable micro-tips. Cover protects tip

Battery-operated, all-purpose wax pen. Instant heat with fingertip pressure control. Design

#PEN50000 - $24.95 #21261 - Set of 3 differently shaped tips - $24.95

#22119 - 12 X 12 X 3/4 - $49.95 #2211901 - 7 X 7 X 3/4 - $29.95 #22570 #1243 #22571 #C1243

WAX DRIP TRAYS

Used for holding rubber molds while injecting wax. Designed to apply even pressure across the entire mold.Accommodates a variety of mold thicknesses up to 1 7/8. Quick loading and release heavy-duty spring latch.

MOLD CLAMP

MasterTouch Kerr Versatile wax pen offering excellent wax control in pattern build-up, denture applications, and spruing. Exclusive feature offers instant tip heating and cooling when used with the optional foot control. Features; Ergonomic handpiece, 2 tips included (21878 & 21887), Temperature range: 66C / 150F to 538C / 1000F. Dual voltage unit. #22129 - Deluxe Kit - $359.95 Mastertouch Tips
Complete tip selection featuring Nichrome wire tips with immediate heat availability and rapid cooling. Tips have snap-in design that allows easy removal. $34.95 each K21885 K21875 K21874 K21879 K21878 F K21877 G K21876 H K25780 I K21888 J K21887 K L M N O K21884 K21883 K21882 K21881 K21880

#21269 - Unit with 3 tips - $179.95

#P19000 - $19.95

ALCOHOL LAMP #686 - $10.95


#687 - 3/16 WICK - $.99 #689 - 1/2 WICK - $1.95

MOLD FRAME PLATES -

#P13200 #P13300 #P13400 #P13500 #P13600 #P13700 #P13800 #P13900 #IC003 #B1242

3/4 THICK 1 THICK 1 1/4 THICK 1 THICK 1 1/4 THICK 3/4 THICK 1 THICK 1 1/4 THICK

SET OF TWO PIECES 5 X 7 1/8 X 1/8 $6.95 4 1/2 X 3 X 1/8 $6.95 3 1/2 X 5 X 1/8 $5.95 4 X 6 X 1/8 $7.95 1 7/8 x 2 7/8 (opening) Single 1 7/8 x 2 7/8 (opening) Single 1 7/8 x 2 7/8 (opening) Single 2 1/2 x 3 3/4 (opening) Single 3 1/2 x 4 3/4 (opening) Single 1 7/8 x 2 7/8 (opening) Double 1 7/8 x 2 7/8 (opening) Double 1 7/8 x 2 7/8 (opening) Double Aluminum mold frame 3 sizes 2 3/4 x 1 7/8 x 1 Quad

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

$15.95 $18.95 $24.95 $29.95 $49.95 $52.95 $64.95 $79.95 $49.95 $79.95

#22580 - $1.95 each

BRASS SPRUE FORMER

A B C D E

MOLD FRAMES

E-Z MOLD CUTTING CLAMP Designed to securely grip and separate rubber molds while cutting. #P28100 - $89.95

www.lacywest.com

17

RUBBER AND WAXES


PLAST-O-WAX
CASTALDO MOLD RUBBERS 5lb Bags $49.95
$44.95 $6.00 $43.95 $6.00
CASTALDO

Blue Plastic Injection Wax

Gold Label is for more intricate molds. Strips 5 lb. box. GOLD LABEL (soft) GOLD LABEL (soft) Strips ONE STRIP White Label is for firm molds, ideal for flat pieces. Strips 5 lb. box WHITE LABEL(firm) WHITE LABEl(firm) Strips ONE STRIP

The finest jewellery molding rubber. Molds are exceptionally long-lasting and have minimal shrinkage.

SUPER CERA INJECTION WAX (5lb bag)


#AQUA Extremely flexible, excellent for intricate filigree and difficult pieces. Inject at 140F/60C.

Has an extraordinary memory and long shelf life. It has a built-in flexibility that protects your wax patterns against breakage and has excellent flow characteristics. Plast-OWax is formulated to be very resilient and you may carve or file it.

MADE FROM 100% NATURAL INGREDIENTS

SILICONE Easy to work with and easy to cut. No release spray needed. High shine finish and high tear strength. Strips 5 lb. box $59.95 SILICONE

Pink- Eliminate casting shrinkage, can produce waxes the same size as model Strips 5 lb. box $59.95 NO SHRINK PINK NO SHRINK PINK Strips ONE STRIP $8.50

#ORANGE Very flexible and easy flowing, good all-purpose wax. Minimal sink. Inject at 155F/68C. $39.95

$39.95

Titanium Will bend, flex and stretch easily, make central core cut-outs and even spiral-cut plugs. Hard at the same time flexible, that means less pattern distortion.That means reduced shrinkage - only 1.4%. Strips 5 lb. box $43.95 TITANIUM (extra firm) Economical Silicone Jewellery Molding Rubber produces wax models with high shine and finish, minimal shrinkage. Low temperature metals such as Pewter can be cast directly into Econosil. ECONOSIL Strips 5 lb. box Strips ONE STRIP

1lb Bars $10.95 EACH

#GREEN Flexible with slow cooling time. Minimal shrinkage, very little sink. Excellent for large flat pieces or as a $39.95 general purpose wax. Inject at 150F/65C. Wax additive makes injection wax flow like water. No need to clean out wax pot with all the mess and delay in work. Just add a handful or two of Golden River wax additive to your current pot and see the improved flow immediately. Later you can add more of your original wax to return to normal conditions.

#GOLD Hard with little flexibility. Flows easily. Will hold sharp detail. Almost no shrinkage or sink. Can be carved. Recommended for large patterns with fine detail. Also, good for metal molds. Injects at 170F/76C. $39.95

#RED An all purpose wax, cools quickly, medium flexibility. Inject at 165F/74C. $39.95

CASTALDO GOLDEN RIVER #D866 - $10.95 1lb Bag

VLT Very Low Temperature for rapid molds from rapid prototypes. VLT Strips 5 lb. box $44.95

$49.95 $8.95

QUICK-SIL SILICONE RUBBER MOLDS #Quick-sil - 2 -lb. Kit - $ 49.95


Strong, long lasting, 0% shrinkage, makes molds with a high shine finish ALMOST INSTANTLY. - No measuring - No messy fluids - No vulcanizer needed - No release spray needed - Can be used for direct casting of pewter and other low temperature metals.

Ready-Cut GOLD Label $52.95 Ready-Cut WHITE Label $51.95 Ready-Cut PINK Label $67.95 Just open the box and these handy pre-cut sizes are ready to use. Pieces measure 1 7/8 x 2 7/8 x 1/8 and will fit most commonly available mold frames.

READY-CUT 5 lb. Box

MOLD RELEASE SPRAY

$16.95

For Mold Frames and Mold Plates, refer to page 17.

CASTALDO

RESIN RELEASE #RRS - $19.95 MOLD LOCK FORMERS

LOC12 - $1.95dz

LIQUID RUBBER MOLD FRAMES - FOR USE WITH LIQUACAST AND LIQUAGLASS 22626 - 2x3x3/4 - $24.95 22629 - 1-1/2x2x3-1/2 - $34.95

LIQUACAST 0% Shrinkage RTV Liquid Rubber Cures at room temperature. LC1 - 1lb Kit $29.95 LC10 - 10lb Kit $89.95 LIQUAGLASS RTV 0% Shrinkage Liquid Rubber - $49.95

JEWELLERY MOLD SEPARATION CREAM MOL2 - $9.95 The easy way to eliminate or reduce mold cutting.
#39259 Stainless Steel Handle $3.95 #259 Plastic Handle $3.95 #0103 #11 Straight Blade Carton $29.95 #0104 #12 Curved Blade Carton $29.95 #bladespk5 Curved Blades Pkg 5 $2.00 Cartons hold 20 packages of 5 blades, made of surgical steel.

MOLD CUTTING TOOLS

18

L A C Y WES T S UPP LIES LTD. 604-669-5229

Easy to measure, debubble & cure at room temperature in 24 hours. Clear liquid RTV jewelry molding rubber makes strong, tough, flexible production molds at a fraction of the price of clear silicone rubbers. Use 1:1 mix ratio. Clear as glass.

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

For hard soldering. Use on gold, silver, platinum, and other met-

SOLDERING FLUXES Self-Pickling Hard Flux Batterns


1 3 8 16 32 128 oz. oz. oz. oz. oz. oz.

CHEMICALS & FLUX


ACIDS and COMPOUNDS Sparex #2
Uses: Prepared pickling compound for silver and gold.

#54400 #54402 #54404 #54406 #54408 #54410

als with high melting points. Preserves temper and colour of metal. Adhesive qualities of this flux holds solder in place.

#SparexBag #45122 #45124

Jel-Flux
#54438

For hard soldering with flame. Produces less oxides and Biodegradable. residues, allows for faster pickling. No toxic fumes.

$2.95 $3.95 $5.95 $7.95 $11.95 $25.95

ProCraft Pickle
#99844

2.5 lb

$7.95 $5.95 $11.95 $19.95 $21.95 $49.95 $49.95

Acetone

Uses: Solvent to clean and dry precision equipment.

10 oz. 2.5 lb

Denatured Alcohol
#23204 #99851 #99852

Uses: Mix with Boric Acid to make flux for white gold. Use in Alcohol lamp for wax working.

1L

#54440 #54442 #54444

fluid between 1100F and 1600F. Contains no fluoride.

and non-ferrous metals. Dissolves oxides at 800F and is

Dan-Dix Paste Flux

For low temperature brazing and silver soldering of ferrous

2 oz.

$5.95

Hydrochloric Acid

Uses: Acidizing, pickling and metal cleaning.

1 Gal

Hydrogen Peroxide Methanol Alcohol Nitric Acid


Uses: Gold testing.

2.25 L 4L

Tix Flux
#54460

Non-corrosive flux, harmless to hands or clothing. Washes off

1.5 oz. 8 oz. 16 oz.

$4.95 $10.95 $15.95

Uses: Electroplating, oxidation, refining and cleaning metals. 35% solution.

#AL500 #Methanol

Uses: Agent in flux. Extremely flammable.

500 ml 1 Gal

$3.95 $12.95 $49.95 $19.95 $29.95 $14.95 $49.95

Tix Anti-Flux
#54462

with water even after drying. Works with any soft solder.

Prevents solder from flowing to unwanted areas. Brushes on.

1/2 oz.

$5.95

#NitricGall #Nit250

Stay-Clean Flux
#54454 #54452 #54252 #99848 #25676 #25677 #25678

For use with Stay-Brite solder.

1/2 oz. 16 oz.

$5.95

Sodium Cyanide
#SodCyan1lb #SodSulphide #99856.

Uses: Electroplating, cleaning of metals.

2.25 L 250ml

MATERIAL SAFETY DATA SHEET MSDS is a reference document that provides crucial safety data about a specific product. In addition to identifying potentially hazardous ingredients, the MSDS provides cautions and warnings about the potential side effects of improper use, and describes first-aid or emergency procedures. You should be familiar with the safe handling, storage and disposal of any product you use, and the MSDS is an excellent source for this information. The MSDS gives guidelines for safe disposal and spill control for different chemical substances. Operational guidelines for use of a specific chemical in your shop are provided by an instruction sheet, and not by an MSDS. If you have employees, you are required by law to keep an MSDS on file for every product you use in your operation and make it available to any employee. As more becomes known about the effects of different chemicals, its important to stay informed and take reasonable precautions to protect yourself and everyone who works with you from avoidable hazards.

-IMPORTANT-

Stay-Brite Solder & Flux Kit Borax

Contains:1/2oz. solder and 1/2oz. flux. Flows at 430F. Prepared borax for making flux for soldering.

$14.95

Sodium Sulphide Sulphuric Acid

Used for balming and stripping.

1 lb Powder

*Please note: Certain chemicals should only be used by experienced tradespersons. These chemicals are to be used with extreme caution. Safety Data Information is listed on packaging.

-ALL MSDS SHEETS ARE AVAILABLE ON THE INTERNET-

$16.95 $7.95 $6.95 $29.95 $39.95 $69.95 $6.50

Uses: Etching agent, electroplating.

Boraxin Liquid Rose Flux Boracic Acid Powder


250ml 500ml 1 litre

Maximizes fire-scale prevention. Made in Germany.

4 oz. cone 425g Powder

Used as an anti-oxidizer soldering or in making flux.

#handyflux #handyliquid #20001

#99849

Handy Flux

325g Powder 1/2 pound 1 quart

Flow Kleen Flux

comes off with warm water. No pickle required.

Firescoff Firescale Flux


#544413 #540020 #504032
MINI SIZE

A spray ceramic coating that prevents scale, acts as a flux, and

250ml 1 oz.

$16.95 $29.95

$7.95

Jax Pint (also available by the gallon) Code Color #45903 Brown/Black #45902 Brown #45900 Green #45904 Black #45905 Flemish Gray/Black #45906 Silver Blackener #45907 Pewter Blackener #45908 Iron Steel Blackener #45967 Aluminum Blackener #45960 Antique Rust #45911 Rust Remover #45914 Instant Silver Cleaner #45915 Copper/Brass Cleaner #45917 Gold/Marble Cleaner

JAX PATINA & CLEANERS

2.25 L

will appear as a darker line if present. Polish to remove.

Solder Prints - apply to suspected solder joints. Joints We also carry GRIFFITH, MAGIC, SUPERIOR and VIGOR FLUORON fluxes.
$29.95

$19.95 $ 2.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

Griffith Liver of Sulphur #45689 4 oz. $8.95 Cupric Nitrate (Green) #99850 100g $19.95 Pro-Craft Silver Oxidizer #45681 8 oz. $12.95 Griffith Nickel/Iron Black #45041 4 oz. $5.95 Vigor Silver Oxidizer #450329 8 oz. $21.95 Vigor Blackground Antique for Brass & Copper #450550 4 oz. $18.95

PATINAS/OXIDIZERS

Price $15.95 $15.95 $15.95 $15.95 $15.95 $16.95 $15.95 $15.95 $16.95 $14.95 $14.95 $14.95 $13.95 $11.95

Brush on articles to provide a tough, smooth, even surface that protects from tarnish and eliminates metal deposits from plating solutions. 45651 Pro-Craft LACQUER STRIPPER 45650 1 pt. 1 pt. $12.95

Pro-Craft High Grade LACQUER

Used for removing and thinning lacquer.

METRIC AND IMPERIAL CONVERSIONS


1 oz. = 0.0296 L 1 pt = 0.4732 L 1 qt. = 0.9464 L 1 gal. = 3.7854 L Wet Measure 115 g = 1/4 lb 230 g = 1/2 lb 460 g = 1 lb 1 kg = 2.2 lb Dry measure

$15.95

* If there is a chemical you are looking for and it is not listed here, please inquire.

Ounce (oz.) Pint (pt.) Quart (qt.) Gallon (gal.) Millilitre (ml)

ABBREVIATIONS

Pound (lb) Kilogram (kg) Gram (g) Litre (L)

www.lacywest.com

19

DAPPING AND BEZEL BLOCKS

Deluxe 62 Piece Dapping Set #P228500 - $595.00

THE AMBASSADOR COLLECTION

DAPPING & DIE SET 14 half-spheres on Designer Dapping Block. #P162500 - $129.95

DAPPING & DIE SET 21 full half-spheres on 2 1/2 x 2 1/2 Dapping Block. #P159500 - $199.95

DAPPING & DIE SET 17 full half-spheres on 2 x 2 dapping block. #P158500 - $149.95 DAPPING & DIE SET 27 half-spheres on flat Dapping Block. #P161500 - $169.95

Cube for making square edges and tubing. With 13 stakes Wooden Stand #CP17 $349.95

DAPPING GROOVE AND TUBING SET

DAPPING GROOVE CUBE

BEZEL BLOCKS WITH ONE PUNCH

#17 $179.95 Made of hardened steel Italian. For bending, creasing , grooving for box making and tubing. PRICE $129.95 $ 99.95 $179.95 $154.95 $159.95 $119.95 $149.95 $139.95 $335.95 $ 99.95 $159.95

PUNCH SETS 30 punches #P22830 - $179.95 24 punches #P22824 - $119.95 5 punches #P22805 - $89.95

We also carry forming and raising stakescall for details.

PLANISHING STAKE SET #P265500 - $295.95

Punch Sets Economy Made in India #DOM1312 Set of 12 with block $ 39.95

#D1328 - Brass doming block with grooves - $39.95 #D1329 - 4-Sided 8 bench block, round and oval - $59.95 #370p - Brass stamping plate - $29.95 #723 - Hexagonal hold plate - $19.95 #342 - Brass doming block 40mm - $29.95 #P15900 - Dapping cube, 2.5 x 2.5 - $89.95 #P16200 - Designer dapping block - $89.95

DAPPING AND FORMING BLOCKS

CODE SHAPE MIN. SIZE MAX. SIZE #8A ROUND 5 mm 20 mm ROUND 3 mm 13 mm #8P #8B OVAL 4 mm 14 mm 14 mm 21 mm #78181 OVAL SQUARE 4 mm 14 mm #10A 6 x 4 mm 15 X 13 mm #78216 EMERALD #78184 PEAR 5 x 4 mm 14 X 21 mm TRIANGLE 4 mm 14 mm #12 #C36 TRILLION 5 mm 15 mm #78204 OCTAGONAL 4 mm 14 mm #10K2 RECTANGLE 6 mm 16 mm Made of hardened steel. High quality, Made in Italy.

#P162500 - Dap & Die set - $165.00 #P161500 - Flat Dap & Die set 24pc - $189.95 #25055 - $54.95 COMBINATION CENTERING & RIVETING PUNCH
Adjustable for light, medium or heavy impressions.

#25064 - $65.95

#25074 $149.95

Made of high quality tool steel, hardness 46-50 rockwell, ground smooth.

#P19700 - 3/4 x 4 x 4 - $19.95 #P19800 - 3/4 x 2 1/2 x 2 1/2 - $11.95 #P19710 - 3/4 x 6 x 4 - $24.95 #P19720 - 3/4 x 6 x 6 - $29.95 #20 - 50mm x 50mm x 20mm Italian - $24.95 Other Italian made steel bench blocks available upon request.
#25400 #25401 #25403 #25390 #25455 #25456 #25457 #25392 #118074

STEEL BENCH BLOCKS

#P19610 - $129.95 COMBO - 1/8 to 1 #P19410 - $79.95 SMALL - 1/8 to 1/2

DISC CUTTING SETS

#P19620 - $134.95 LARGE - 1 1/8 & 2 REQUIRES HYDRAULIC


PRESS

CHASING TOOLS Set of 20 #25180 - $129.95 Miniature Anvils

#P19510 - $99.95 MED - 1/2 to 1

ECONO CENTER PUNCH #47900 - $1.95 WALLER SCRIBER #52950 - $6.95

#47802 - $34.95

20

For repouss work and chasing.

Pitch Bowls, Bases & Pitch

L A CY WEST SUP PLIES LTD. 604-669-5229 Toll Free 1-800-66 7 - 4 11 8

Shallow Bowl Deep Bowl 5 dia. Deep Bowl 8 dia. Black Pitch 8 oz. Base Base Base for 8 bowl Pitch 32 oz. Red german pitch 2kg

$7.95 $7.95 $10.95 $21.95 $4.95 $4.95 $8.95 $44.95 $89.95

#12305 #99920 #383

Size 5"L x 1 1/4"W x 1 3/4"H $19.95 Round base. $29.95 Double ended $29.95 Well made quality anvils of hardened steel. Small anvils weight 1/4 lb. Large Anvil 8 lb.

For flattening and shaping, with hole for riveting.

AUTOMATIC CENTER PUNCH - #47860 - $19.95

WOODEN DAP SET


25135 - $10.95

www.lacywest.com

H A L F R O U N D S T E E L D R AW P L AT E S CODE SIZE mm HOLES PRICE 9 - 12 31 High Dome $169.95 78015 6-9 31 High Dome $109.95 78016 78017 3-6 31 High Dome $149.95 1-3 20 High Dome $109.95 78018 9 - 12 31 High Dome $169.95 78019 6-9 31 Med Dome $149.95 78020 78021 3-6 31 Med Dome $149.95 1-3 20 Med Dome $ 95.95 78022 9 - 12 31 Low Dome $169.95 78023 78024 6- 9 31 Low Dome $169.95 78025 3-6 31 Low Dome $139.95 1-3 20 Low Dome $ 99.95 78026

D R AW P L AT E S F O R M A K I N G W I R E
78168 78169 78170 78171 TUNGSTEN CARBIDE STEEL DRAWPLATE CODE SIZE mm HOLES PRICE 0.25 1.25 0.25 0.26 1.20 2.20 2.20 2.80 20 20 36 39
Tungsten Carbide Drawplates polish wire, while being drawn .

$219.95 $219.95 $289.95 $149.95

PEAR SHAPE STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 31 $169.95 78027 9 TO 12 31 $169.95 78028 6 TO 9 78029 3 TO 6 31 $139.95 20 $ 99.95 78030 1 TO 3

OVAL SHAPE STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 31 $199.95 78031 9 TO 12 31 $179.95 78032 6 TO 9 78033 3 TO 6 31 $139.99 78034 1 TO 3 20 $ 89.95 MARQUISE SHAPE STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 78035 9 TO 12 31 $179.95 31 $159.95 78036 6 TO 9 31 $139.95 78037 3 TO 6 78038 1 TO 3 20 $ 89.95 SQUARE SHAPE 78053 Square 78049 Square 78047 Square STEEL DRAW PLATE .5 to 3 mm $ 99.95 3 to 6 mm $159.95 6 to 9 mm $169.95

ROUND AMERICAN STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 1.5 - 6 40 $149.95 78143 78145 0.5 - 6 60 $169.95 78146 1-7 60 $189.95 14 RAYS STEEL DRAWPLATES CODE SIZE mm HOLES 78111 3 - 6 31 20 78112 1 - 3 PRICE $149.95 $119.95

TUNGSTEN CARBIDE STEEL DRAWPLATE CODE SIZE mm HOLES PRICE #78172 2.30 - 6.00 24 $169.95 ROUND STEEL DRAWPLATES CODE SIZE mm HOLES 12 - 15 31 78001 78002 9 - 12 31 78003 12 - 14 20 10 - 12 20 78004 78005 8 - 10 20 78006 6-9 31 78007 5-8 31 78008 3-6 31 79009 3-5 31 78010 2-5 31 78011 0.5 - 3 31 78012 FIN - 2 31 78013 FIN - 1 20 78014 1-3 31 PRICE $169.95 $189.95 $119.95 $129.95 $119.95 $129.95 $119.95 $ 99.95 $ 99.95 $109.95 $ 89.95 $ 99.95 $ 89.95 $ 89.95

SQUARE SHAPE STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 78046 8 - 10 20 $169.95 78048 5- 8 31 $149.95 78050 3-5 20 $119.95 78051 2-5 31 $139.95 78052 1-3 31 $119.95 78054 Fin - 2 20 $ 99.95 78053 0.5 - 3 31 $ 99.95 SQUARE CHAMFERED CODE SIZE mm HOLES 78058 3-6 31 78059 1-3 20

PENTAGON SHAPE STEEL DRAW PLATE 78092 78091 Pentagonal Pentagonal 1 to 3 mm 3 to 6 mm

$89.95 $99.95

8 SLOT STEEL DRAW PLATE 78104 78103 8 slot 8 slot

PRICE $149.95 $119.95

TRIANGLE SHAPE STEEL DRAWPLATE CODE SIZE mm HOLES PRICE 78078 6-9 31 $169.95 78079 3-3 31 $129.95 78080 1-3 20 $ 99.95 STAR SHAPE STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 78099 3-6 31 $159.95 78100 1-3 20 $119.95 EMERALD CUT STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 78069 6-9 31 $159.95 78068 9 - 12 31 $159.95

78161

COMBINATION STEEL DRAWPLATES CODE SIZE mm HOLES PRICE 78157 1 - 3.5 20 Round $199.95 1.5 - 3.5 20 Half Round 1 - 3.5 20 Square 1-3 1.5 - 4 1.5 - 2.4 17 Round 17 Half Round 17 Square $249.95

Forged steel with serrated teeth for pulling wire. 515 $22.95 Length 10 inches.ECONOMY draw bench)

STEEL DRAW TONGS 57056 $49.95 Length 8 inches.GERMAN 57058 $69.95 Length 10 inches.GERMAN 113699 $139.95
9 ITALIAN DRAW TONGS (for

1 to 3mm 3 to 6mm

$ 89.95 $109.95

DURSTON MANUAL 4.5FT DRAW BENCH WITH DRAW TONGS #113510 - $1195.95

These drawplates are made of high grade, hardened tempered steel and are used to reduce wire size to your requirements. Made in Italy. Prices subject to changes due to fluctuations in Euro and fuel surcharges.

DRAWPLATE FOR PULLING TUBING CODE SIZE mm HOLES PRICE 43021

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

B EES WAX L UBRICANT

26100 - $2.95 - Small tube Beeswax 26103 - $13.95 - 1 lb cake Beeswax

3.00 - 10.00

18

$69.95

FOR DRAWING WIRE.

Looking for something you cant find? Please call us. We have sources worldwide to secure almost any tool required.

www.lacywest.com

21

EAR PIERCING SUPPLIES & CLOTHS


Increase your Sales! Offer ear piercing at your retail store. Easy to do, with clear instructions.

Ear Piercing Kit

#SK12 - Starter Kit #R993 - Universal Kit

With ear-piercing stud gun and one dozen studs. Comes with three adapters plus one pair of training studs, non-toxic marking pen, ear care gel, sterile prep pads and a window banner and counter sign. Easy-to-follow instructions.

COMPLETE STARTER KIT

$109.95 $89.95

#R901 125ml. bottle $3.95 DISCOUNT ON 12 OR MORE

Benzalkonium Chloride solution. General anti-septic. Ideal solution for ear piercing.

ANTI-SEPTIC

M100YCZG M213Y R502Y R501Y M307Y R1301Y R113Y M113Y 713 L204Y M200W M200Y M204W M204Y R200W R200Y R203Y R204W R204Y R213Y R301Y R513Y4 -

PACKAGED BY THE DOZEN

Mini CZ Gold Mini Birthstone Assorted Regular Heart Regular Star Mini Black Onyx Regular Tiffany Pearl Regular Birthstar Assorted Mini Assorted Birthstars Best Sellers Assortment Maxi april Birthstone Mini White Studs Mini Yellow Studs Mini April Birthstone in Silver Mini April Birthstone Yellow Regular White Studs Regular Yellow Studs March Birthstone Bezel Regular April Birthstones in Silver April Birthstone Bezel Regular Assorted Birthstone Bezel Regular Pearl Bezel Assorted Shapes Crystal

$65.95 $27.95 $29.95 $29.95 $29.95 $29.95 $29.95 $29.95 $24.95 $39.95 $19.95 $20.95 $26.95 $26.95 $16.95 $16.95 $21.95 $21.95 $21.95 $21.95 $21.95 $29.95

A double cloth impregnated with jewellers rouge and outer cloth used for final finish Packed in plastic pouches. Size: 9 x 11. 17076 single $5.95
DISCOUNT ON 1 DZ OR MORE

Fabulustre Cloths

Selvyt Cloths
17081 Washable. Single layer, lint-free, 100% cotton cloth. 14x14 10x10 $9.95

17082

ECONO ROUGE CLOTH #POL16900 - $4.95

SUNSHINE CLOTH #33701 - $2.95

$12.95

Protects jewellery from fingerprints and tarnish when polishing, finishing, or plating. 17102-Heavy weave $13.95 $7.95 17103- Light weave

Cotton Gloves

Shino Cloths

Double cloth, impregnated with jewellers rouge. Packaged in plastic pouch. Size 12 x 14. 17090 single $5.95
DISCOUNT ON 1 DZ OR MORE

Connoisseurs Cloth

A rouge-less, dual-cloth buffing system. Ultra soft for jewellery cleans and buffs gold and silver.Silver cloth lifts tarnish while leaving a anti-tarnish coating. 11x14 170270 Gold cloth $5.95 170271 Silver cloth $5.95

JSP BLUE CLOTH #PS216 - $3.95

22

LA C Y WEST SUP PL IES LTD. 604-669-5229

BRILLIANT POLISH CLOTHS #POL70000 - 4X6 #POL70500 - 12X7.5 #POL71000 - 12X15 #POL17000 - 8X12 double sided

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

$2.95 $4.95 $7.95 $5.95

EASY TO USE DISPOSABLE JEWELLERY WIPES. CONTAINS

CONNOISSEURS JEWELLERY WIPES 2301850 - $5.95

25 POP-UP WIPES.

NEEDLE FILES
EQUALING 6-1/4 EQUALING 7-3/4 3 SQUARE 6-1/4 3 SQUARE 7-3/4 KNIFE 6-1/4 STYLE HALF ROUND 6-1/4 HALF ROUND 7-3/4

FILES SWISS NEEDLE AND HAND


31505 $ 7.95 31619 $ 7.95 31626 $ 8.95 31637 $ 7.95 31645 $ 8.95 31590 $ 7.95 31458 $ 7.95 -

CUT 00 31524 $ 8.95 -

Grobet-Swiss Precision Files are made of tough, chrome alloy steel, tempered by a special process.

CUT O 31525 $ 9.95 31531 $10.95 31620 $ 8.95 31638 $ 8.95 -

SQUARE 6-1/4 SQUARE 7-3/4

31506 $ 7.95 31512 $ 7.95

CUT 2 31527 $ 9.95 31533 $10.95 31508 $ 7.95 31513 $ 7.95

CUT 4 31529 $10.95 31535 $10.95

31622 $ 8.95 31627 $ 9.95 31640 $ 8.95 31647 $ 9.95 31559 $ 8.95 31593 $ 7.95 31598 $ 9.95 31461 $ 7.95 31468 $ 8.95 31491 $ 8.95

31510 $ 8.95 31514 $ 8.95 31624 $ 9.95 31628 $10.95 31561 $ 9.95 31595 $ 7.95 31599 $ 9.95 31463 $ 8.95 31470 $ 9.95 31666 $ 8.95 31492 $ 9.95 31642 $ 8.95 31649 $ 9.95

CUT 6 31530 $12.95 31511 -

31625 $ 9.95 31643 $14.95 31650 $16.95 31562 $10.95

$ 9.95 -

FILE CLEANING BRUSHES


For unclogging teeth of files. 33981 10 long $ 7.95

ROUND 6-1/4 ROUND 7-3/4

31558 $ 8.95 31591 $ 7.95 31597 $ 9.95 31459 $ 7.95 31466 $ 9.95 31663 $ 8.95 31490 $ 8.95

BARRETTE 6-1/4 BARRETTE 7-3/4 WARDING 6-1/4 CROSSING 6-1/4

31596 $ 9.95 31464 $ 9.95 31471 $21.95 31667 $ 9.95


Crossing Warding

FILE HANDLES

$3.95 each

31664 $ 8.95
Knife

31493 $11.95

37782 Use for needle files - 37784 Use for hand files. Made of unbreakable nylon, handle has two metal threaded inserts which secure the file tang for maximum strength. 37820 - SKROO-ZON - wooden file handle.

$3.95 each

Cut flat side only. Tapered in width and thickness . Used mainly for removal of metal from sharp angled slots.

CODE 31027 31028 31029 31030 31031

Barrette Hand File


LENGTH 6 inch 6 inch 6 inch 6 inch 6 inch CUT 00 0 1 2 4

CODE LENGTH CUT PRICE 31143 6 inch 00 $14.95 31144 6 inch 0 $14.95 31145 6 inch 1 $16.95 31146 6 inch 2 $16.95 31147 6 inch 3 $16.95 31148 6 inch 4 $17.95 31149 6 inch 6 $27.95 Hand file 3/4 inches wide, parallel width, one safety edge. A general purpose file used primarily for working on flat surfaces. Finer cuts for precision finishing. Tapered in thickness (5/32 inches) to make possible perfectly flat filing. PRICE $19.95 $20.95 $23.95 $23.95 $26.95

Flat Hand File

Half Round

Equalling

Square

3-Square

Pillar Regular Hand File

Round

Barrette

CODE LENGTH CUT PRICE 31243 6 inch 00 $14.95 31244 6 inch 0 $15.95 31245 6 inch 1 $16.95 31246 6 inch 2 $16.95 31247 6 inch 3 $17.95 31248 6 inch 4 $19.95 31249 6 inch 6 $27.95 Pillar File 1/2 wide, 11/64 in thickness. A general purpose file used primarily for working on flat surfaces. While parallel in width they are tapered in thickness to make possible perfectly flat filing.

Half Round Slim Ring Hand File


CODE 31127 31128 31129 31130 31131 31132 LENGTH 6 inch 6 inch 6 inch 6 inch 6 inch 6 inch CUT 00 0 1 2 3 4 PRICE $27.95 $29.95 $31.95 $32.95 $34.95 $37.95

SETS OF 31770 31771 31772

BARRETTE cut 2 31701 31703 cut 4 31704 cut 6 THREE SQUARE 31761 cut 2 cut 4 31762 cut 6 31763 HALF-ROUND 31725 cut 2 31727 cut 4 31728 cut 6 PILLAR FLAT 31737 cut 2 ROUND 31743 cut 2 31745 cut 4 31746 cut 6

Escapement Files
$12.95 $13.95 $16.95 $12.95 $13.95 $13.95 $15.95 $16.95 $18.95 $ 9.95 $ 9.95 $12.95 $12.95

T HERE

Jewelers Needle File Sets


CODE 33906 (Swiss) FILES 6 6 CUT Fine

HAVE SHOWN ONLY THE MOST POPULAR P R E C I S I O N F I L E S .

ARE MANY DIFFERENT TYPES OF FILES AVAILABLE .

Diamond Needle File Set of 5 FL085 - $49.95

WE

Used for filing on curved surfaces and in corners. Gently tapered in width and thickness, they are cut and useable right to the point. Thinner in width than the half round files. Width 15/32 , Thickness 9/64 . Chisel cut used for rapid removal of metal where contour and finish is not too important. Etched cuts are used where shape and finish must be held. Etched cut file available in Cut 3 only #31131.

Overall length is 5 long, length of cut 1-9/16 to 2-9/16 depending on shape. Quality Swiss files.

12 ASSORTED cut 2 $149.95 cut 4 $169.95 cut 6 $189.95

33907 (Swiss)

Medium Medium

PRICE

$24.95

33908 (Swiss)

12

$28.95

$49.95 CUT 1 - MEDIUM

Double-end vulcanite file with open coarse teeth for filing plastics, waxes, and soft materials. One end is coarser than the other. CUT 2 - MEDIUM STANDARD CUT 3 - MEDIUM to FINE

31384 31385

Vul-Crylic File Vul-Crylic File

Swiss 8 Swiss 7

$29.95 $26.95

A set of six wax-cutting needle files, used for cutting and filing of wax . Coarse wide teeth eliminate clogging . SETS CONTAIN: Equalling Flat Half-Round Round Square Three Square CUT 6 - FINEST

Wax File Set Swiss 33922 $49.95

CUT 00 - COARSEST

Prices in Canadian Funds/Call for Confirmation/Prices subject to change

CUT 0 - COARSE

CUT 4 - FINE

www.lacywest.com

23

FLEXSHAFTS AND ACCESSORIES


Compact, lightweight table model designed for high productive performance and overall excellence. A micro-computer integrated controller precisely sets the speed for optimum cutting and polishing of a variety of materials. Motor handpiece delivers excellent torque with smooth, quiet, vibration-free operation. The control panel has a digital display with variable speed from 1,000 - 50,000 rpm. Standard Package includes: Control Unit Z500SB, Motor handpiece UM50T, Foot Pedal FC-40 and Collet Chucks (3 and 2.35mm). -

NSK 2500 MICROMOTOR

High Speed Applications up to 45,000 RPM

1070

For high speed applications up to 38,000 rpm, including light deburring of cast pieces, bright cutting in jewellery making and fine detailing in wood. Compared to flexshafts, micromotors have much less torque, however the higher speed results in a comparable rate of material removal with a lighter touch. The simple cord connection between the handpiece motor and control box is another key advantage. Unlike the "drag" and general restriction in maneuverability you have with a shaft and sheath, micro motors offer much greater freedom of movement. The NEW 1070 Kit includes: HP4-917 Control Box MH170 Handpiece with 3/32" (2.35mm) Collet HP4-960 Variable Speed Foot Control HP4-933 Handpiece Cradle Spare pair of motor brushes, spare fuse, collet changing wrenches. This new brushless micromotor is ideal for various applications at high, medium and low speed. High Speed Applications: Running at high speed, it provides smooth, clean , and sharp detailing in metal and wood. Its also great for bright-cutting, grinding, finishing, texturing, and polishing. Medium Speed Applications: At medium speeds it is ideal for effortless and fast stock removal in wood, diestone, or acrylics. Low Speed Applications: The low end offers extra control and power for stone setting and milling.

FOREDOM 1070 ROTARY MICROMOTOR KIT

FW2500 - $1895.00

Multi-purpose ultra-precision micro-grinder. Specifications: - 1,000 - 35,000 rpm - 100 V/ 50-60 Hz - 30 W power consumption - 71 W output power - Max torque - 4.1 N cm

NSK ELECTER E-MAX

F1070 - $595.00

MO300 - $1295.95

The Foredom Brushless, High Torque, High Speed Micromotor #1050


Up to 50,000 RPM - $1095.95

1050

Powerful variable speed bench lathe in a compact size for use at the workbench. Comes complete with tapered spindles and 1/4 collet holder. Ball bearing motor 1,800 to 7,000 RPM. Convert your lathe into a flexible shaft machine. with the Series Flexade B.

34376 Bench Lathe Foredom BL-1 BO14 Flexade Series B


Tapered Spindles Collet Holders

$249.95 $29.95

Drill Press

With the Flexade B 1/4 coupling and sheath, any Foredom can be attached to a Series B Flexade (except 25H,30H,44H,9D). Specify motor coupling size - ( 1/4, 1/2, 3/8, 5/16) Note - 1/4 supplied if not otherwise specified.
Wheel Mandrel Chuck Arbor

77 - Outer Sheath, CC motor - $19.95 93 - Inner-Coil, CC motor - $18.95

119P - Carbon Brushes 2pc - $9.95

10006 - Foredom Grease - $7.95 10005 - Foredom Oil - $6.95

FOREDOM MAINTENANCE PARTS

TM-3 Left TM-4 Right

CHA-1 Collet Holder for 3/32. CHA-4 Collet Holder for 1/4. WM-3 Wheel mandrel Left WM-4 Wheel mandrel Right JCA-A Chuck Arbor

Grobet Micro Motor

DP30 - $ 189.95 WITH DIAL GAUGE: DP39 - $ 259.95

A rugged and precise stand which converts your Foredom flexible shaft power tool into a drill press. The sturdy, all metal stand is fully adjustable, has a 2 throat capacity and a stroke length up to 11/4.For use with Foredom handpiece models- 30, 30H, 44 and 44H. Foredom

Chuck Key on Handle

24

28212

$ 5.95

Clamps onto 1/2" diameter or smaller pole and secures your handpiece when not in use.

Handpiece Rest HR2

Handpiece Holder Specify - #25, 30 or 35. This third-hand device clamps to the workbench, allowing the operator to bring work to tool. Includes handpiece clamp, rod, and BC1 bench clamp. HH30 $59.95

Dual volt 110/220 On/off foot pedal. Dial speed dial control. 5L x 3H x 4W 34,000 RPM Holds 3/32 burs. Durable steel casing. Quick change of burs One Year Warranty

34555

$399.95

L A C Y WES T S UPP LIES LTD. 604-669-5229

$10.95

shaft use.

Adjustable Flex Shaft Holder

Attaches to bench and adjusts from 26" to 41". Swivels for easy flex

HOL61900 - single (holds one motor) MH4 - double (holds two motors)

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

$29.95 $89.95

SALE!

FLEXSHAFTS
Series CC. SR motor 1/6 HP. Forward and reverse speed. FCT foot operated speed control. Standard #30 handpiece and chuck key with plastic handle. 54pc Accessory Kit with rotating bur and tool holder, flex shaft grease. 18,000 RPM and 66% more power than Series CC. All parts USA made Solid State.

SR2230

Jewellers Kit $ 219.95 Foredom New SR Series replacing

Allset Stone Setting Guide

FOREDOM
Used in combination with the #30 handpiece, is ideal for production stone setting. This system allows you to quickly and accurately cut the seats for prong and channel setting, as well as perform pav applications. With the Allset, you can achieve perfect, controlled results for all of your stone setting operations. The Allset is available as a complete system (Kit 820), or you can customize your Allset for your shops needs by selecting among the kits listed. (Video or DVD) - Pamphlet available.

1/6 HP

Call for more info. Brochure available.

Power assisted Engraving and Stone Setting. Bezel ,Channel Setting,raising beads,cutting grooves, chasing,turning prongs and decorating borders.Cut clean,bright,straight or curved lines.

Totally enclosed, permanent magnet, DC motor with built-in rectifier that eliminates the need for reduction gears to achieve high torque and power at low speeds. Operates at speeds up to 2,800 strokes per minute. Kit comes with instructional Video, EMG Dial Control, FCG Foot Switch, #9D Handpiece with 3 interchangeable collets 1/16, 3/32, 1/8 for holding gravers, beading, and setting tools. Adjusting ring changes impact force. Palm rest for comfort. Specifically designed for power engraving and does not require a compressor.

PowerGraver Flex Shaft

F825 F826 F827 F832 F828

F820

FCT control, #44T Handpiece with 3/32, 1/8 and 1/4 collets pin & wrench, accessory kit and grease.

Woodcarving Kit 5240

1/3 HP

This kit is for stone setters and other jewellers who need high torque at low speed. TXR Foot Control, # 30 Handpiece, up-graded 54 pc. accessory kit, Chuck key with plastic handle, Spare Motor Brushes, Grease. 15,000rpm. The motor comes supplied with Foredom's standard shaft and sheath. TXR Control - this foot operated speed control has special solid state electronics for use exclusively with TX and TXH motors. It comes in a heavy duty plastic housing with an extra wide design.

TX Motor Kit Jewellers Kit

2293CAN - $595.95

F844

Prepare channel settings with ease and consistency.

Master Kit with #30 handpiece,Allset handpiece attachment,Z bracket AK-820 $695.95 Master Kit contains all items listed above except #30 hand piece. AK-825 $529.95 Prong Guide Kit includes Allset handpiece attachment with Z bracket, 13 prong setting guides,finger nuts,allen wrench, and $219.95 instructions. Prong Guide Accessory Set includes 13-piece prong setting guide. $119.95 Channel Kit with Allset handpiece attachment, Z bracket, 3 channel setting guides for baguette, and double knife-edge for round stones, finger nuts, allen wrench, and instructions. $219.95 Pav Kit with Allset handpiece attachment, Z bracket, 7 pav guides, finger nuts, allen wrench, and instructions. $279.95 Fence Guide Kit converts the milling assembly above into fully operational table saw and planer. Use with cutters and burs to cut, grind or $359.95 plane gold, platinum, silver, wax and more.
Prepare 4 -prong settings fast and accurately. Create perfect, even seats of your settings on milling table.

S Motor - Foredom's 1/8 hp, ball bearing, hang-up style motor with speed up to 18,000 rpm. This is, Foredom's most popular motor, and its increased power (25% more power than CC, DD, and MM motors), makes it perfect for just about any application. FCT Control - this foot operated speed control has solid state electronics and comes in a heavy duty plastic housing with an extra wide design. No. 44T Handpiece. This collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4". It comes with 3/32", 1/8" and 1/4" collets. The tapered design allows for close and safe work. The No. 44T is a member of the Foredom system of interchangeable handpieces.

TX300 - $395.95

ALL SET GUIDE VHS VIDEO 125 - $22.95 Mini Vise

Manual Control EM1 - $69.95

Speed Controls for use with Flexible Shaft Power Tools


Solid state control in plastic housing. Control knob allows you to easily adjust the speed from low to full.

F372000

Zinc die cast Mini Vise firmly grasps small workpieces for precision drilling on the table top. Has horizontal and vertical Vgrooves for holding small round pieces. Jaw width 1-3/8,capacity 1-1/4

Foredom

$29.95

Foot Control
plastic - $49.95 SCT - cast iron housing - $79.95

FCT - heavy duty

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

5240 - $299.95

AC/DC

www.lacywest.com

25

F L E X S H A F T H A N D P I E CES
General Use Handpiece Model #30

Handpiece #30 Foredoms most popular handpiece. Geared 3-jaw Jacobs chuck takes any size accessory shank or drill bit up to 5/32 in diameter. Pre-lubricated ball bearings require no maintenance. Complete with chuck key. 1 dia., 5-1/4 long. Foredom

30

Rapid Release Handpiece Model #10

#10177 #CR-2 #DIB30000

Points for #15 and 15D Handpieces


Hammer Handpiece Model #15 Anvil Point Carbide Point Pave Point

$ 9.95 $13.95 $24.95

Foredom Hammer Handpiece Has 1/32 stroke with adjustable impact and comes with an anvil point. Can also be used with new pave point for special texturing. A stylus with carbide tip is available for texturing, marking or scribing hardened steel. Speed 0-5,000 rpm. Recommended for use with Series L Motor. Measures 1/2dia at tip 6 long - standard.

With Duplex spring.Same as #10. Handpiece measures 3/4 dia., 10 3/4 long. 10 Rapid Release Handpiece #10 standard $269.95 10D Rapid Release Handpiece #10 duplex spring $279.95 340251 Pfingst Faro quick release duplex Handpiece $319.95

Has a quick lever for easy bur changes, accepts 3/32 (2.35mm) shanks only. Pre-lubricated ball bearings require no maintenance. Ball bearings run cool for prolonged use. Handpiece measures 3/4 dia., 71/4 long. Foredom

Handpiece #30

$89.95

15 15D

Slimline Handpiece Model #8

Slimline Handpiece #55 Used for fine, detailed work. Its chuck guard sleeve protects fingers and permits close work. Guard slides back when changing accessories. Comes complete with 3/32 collet and wrench for changing collets. Speeds up to 10,000 rpm. Four collet sizes are available. Measures 9/16 diameter., 6-1/4 long Perfect for diamond flywheels. 35,000 RPM. Handpiece is supplied with a collet. Please specify 3 mm or 4 mm collet when ordering. Foredom 5 sizes: 1/16, 3/32, 3/16, 3 m, 4 mm. Individual 1/8 and 2.35 mm collets also available. Exclusive QuickChange press-to-release collet. Ideal for stone setting and other applications requiring frequent bur changes. Accepts 3/32 (2.35mm) shank size accessories. Pre-lubricated ball bearings require no maintenance. Slimmer grip for fingertip control. Measures 19/32 dia., 7 long. Foredom

With Duplex spring measures 9-1/2 long.

Handpiece #15 standard Handpiece #15 with Duplex Spring

$169.95 $179.95

8 8D

Handpiece standard Handpiece with duplex spring

$ 69.95 $119.95

High-Speed Handpiece Model #35

35

Handpiece #35

$249.95

QuikChange Handpiece Model #18

18 18D

QuickChange standard Quikchange with Duplex Spring

Foredom Quick Change 52SJ for use only with 2.35mm (3/32) shank burs or mandrels. Durable plastic barrel and grip that is comfortable to hold. It is smooth running with pre-lubricated ball bearings that do not require any lubrication.. A push/pull action on the handpiece body is all that is required to change accessories. 5-1/2 long without duplex. Foredom # 20 handpiece Quick Change Release The #20 has a molded plastic front grip with tapered sides for easy and close handling. It has pre-lubricated ball bearings that do not require lubrication. Light weight, only 4 oz. Measures: 5-5/8 long, 1-1/8 diameter ( center 3/8) diameter front taper. The #20 has easy lever action. To insert an accessory, rotate 90 away from handpiece body. Insert accessory , and move lever forward or back 90 into locked position. For use only with 3/32 ( 2.35mm) Burs. * Note: Even when not in use, it is important to always store a bur in the collet of a Quick Change handpiece.

With Duplex spring measures 19/32 dia., 10-3/4 long.

$219.95 $239.95

52SJ

With Duplex 10 Long 51/64 dia.

$279.95

PFINGST Handpiece

20

Faro Handpiece Light weight, one piece body, with permanently lubricated double sealed ball bearings. Quick tool change system provides real time savings. Comes with or without duplex connector and one 3/32 collet.

$ 99.95

FAC - with out duplex spring FABD - with duplex spring DIB30000

PavTron Diamond Tip for hammer handpiece.

$199.95 $219.95

26

L A C Y WE ST SUP P LIES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-66 7 -4 11 8

$ 24.95

E N G R AV E R S S U P P L I E S
37760 4 $5.95 Handle with chuck. Chuck opens -.085-.128. End of handle can fit onto tapered spindles. 3/32 & 1/8 mandrels will fit. 37764 $7.95 Handle with 2 chucks. Chucks opens 0-.128 Used mostly for beading and millgrain tools. 37767 $7.95 Handle for MilIgrain. Comfortable, fits in palm of hand. Just twist sleeve to open and close. 37769 $15.95 Swivel Tool Handle. Comes with 2 chucks. Chucks open 0-.089. Ball handle, used for holding burs and taps. 37865 37867 37868 37870 37856

Beading Blocks
1040 - 40 holes - $99.95

53100 $89.95 Set of 6 popular sizes. Millgrain Wheels $14.95 each 41710-01- #1 41710-08- #8 41710-02- #2 41710-09- #9 41710-10- #10 41710-03- #3 41710-04- #4 41710-12- #12 41710-05- #5 41710-13- #13 41710-06- #6 41710-14- #14 41710-15- #15 41710-07- #7

Millgrain Wheels and Handle

HARDWOOD GRAVER HANDLES 37874 ROUND 37872 PEAR 37857 HALF-HEAD - Small 37859 HALF HEAD - Med. 37860 HALF HEAD - Long

$1.95 each

53013 - 12 holes - $34.95

BEADING TOOL SET (23 PC.) BD629 $29.95


Sizes - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, Sizes - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12

13, 14, 15, 16, 17, 18, 19, 20, 21, 22.

GRS

MUSHROOM - Med. MUSHROOM - Short MUSHROOM - Long OVAL GOURD

BEADING TOOL SET (12 PCS.) BD628 $19.95 BEADING TOOLS SOLD SEPARATELY $ 1.75
EACH

36880

CROCKER GRAVER SHARPENER Roll over flat oilstone to sharpen.

Adjusts angles.

$ 49.95

*Can use #37764 Hand Carbide Tool Holder or GRS 002233 Handpieces.

002232

GRAVERS FOR PLATINUM


2

Blank Tungsten 2

Carbide

Square Tungsten

$11.95

$13.95

ROUND GRAVERS - or bead raising, block lettering, and line engraving.


EURO # USA# 2 4 6 8 10 12 14 16 18 20 22 24 26 28 QC-50 QC-51 QC-52 QC-53 QC-54 QC-55 QC-56 QC-57 QC-58 QC-59 QC-60 QC-61 QC-62 QC-63 MM 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8

Also available Special -Wood Gravers Set of 6 for Small Carving 002295 & Set of 6 for Large Carving 002371. Quick Change version available.

CODE

FLAT GRAVERS - For bright cutting, background removal, lettering, stylish borders.
EURO # USA# QC-36 QC-37 QC-39 QC-38 MM 0.2 0.4 0.8 0.6 CODE

GRS QC Gravers fit many power handpieces including GRS GraverMax & GraverMach, NgraveR, Foredom, PowerGraver and more. Ready to go shape, no shortening, no shaping. Special length and shape fit GRS QC holders and many power handpieces. Made of High-Speed Chrome Steel. - $10.95 EACH
ONGLETTE GRAVERS - for line engraving, stone setting, inlay work, borders
EURO # USA# QC-5/0 1.16 MM

KNIFE GRAVERS
EURO USA 18 20 22 24 26 28 30 32 MM

022450 2 022451 4 022452 6 022453 8

022436 5/0 022437 4/0 022438 3/0

022454 10 022455 12 022456 14 022457 16

022458 18 022459 20 022460 22 022461 24 022462 26 022463 28

QC-43

QC-42

QC-41

QC-40

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

QC-49

QC-48

QC-47

QC-46

QC-45

QC-44

1.6

1.4

1.2

1.0

2.8

2.6

2.4

2.2

2.0

1.8

022443

022442

022441

022440 0

022439 2/0

022449

022448

022447

022446

022445

022444

QC-8

QC-7

QC-6

QC-5

QC-4

QC-3

QC-2

QC-0

QC-1/0

QC-2/0

QC-3/0

QC-4/0

3.36

3.14

2.94

2.74

2.54

2.16

1.94

1.78

1.58

1.45

1.35

1.24

022408

022407

022406

022405

022404

022403

022402

022401

022400

022399

022398

022397

022396

CODE

CODE 022470 022471 022472 022473 022474 022475 022476 022477

QC-K0 1.8 QC-K1 2.0 QC-K2 2.2 QC-K3 2.4 QC-K4 2.6 QC-K5 2.8 QC-K6 3.0 QC-K7 3.2

www.lacywest.com

27

ONGLETTE

Swiss Made Glardon+Vallorbe High Speed Yellow Tang Carbon Steel suitable for use with all types of metals,

wood, bone, ivory, onyx. Used by engravers, stone setters, diesinkers, jewellers, and watchmakers.
GRAVER # HIGH-SPEED CARBON STEEL THICKNESS MM 5/0 36259 36113 1.16 4/0 36261 36114 1.24 3/0 36263 36115 1.35 2/0 36265 36116 1.45 0 36267 36117 1.58 1 36269 36118 1.78 2 36270 36119 1.94 3 36271 36120 2.16 4 36272 36121 2.54 5 36273 36122 2.74 6 36274 36123 2.94 7 36275 36124 3.14

E N G R AV E R S S U P P L I E S

FLAT

High Speed Gravers $9.95 ea. Glardon+Vallorbe

8 36276 36126 3.36

ROUND

Carbon Steel Gravers $ 5.95 $11.95 EACH

GRAVER # SWISS # HIGH-SPEED CARBON STEEL THICKNESS MM GRAVER # SWISS # HIGH-SPEED CARBON STEEL THICKNESS MM

36 2 36277 36136 .2 50 2 36289 36180 .2

37 4 36278 36137 .4 51 4 36290 36181 .4 0

38 6 36279 36138 .6 52 6 36291 36182 .6 1 22 36302 36151 2.2

39 10 36280 36139 1.0 53 10 36292 36183 1.0

40 12 36281 36140 1.2 54 12 36293 36184 1.2 2 26 36304 36152 2.6

41 14 36282 36141 1.4 55 14 36185 1.4 3 28 36305 36153 2.8 64 36174 2.1 8 36198 2.75 6 36166 2.50

42 18 36283 36142 1.8

43 20 36284 36143 2.0 56 18 36186 1.8

45 24 36285 36145 2.4

KNIFE

1.6 4

16 36294

2.0

20 36295

HSS $12.95

EACH

OVAL SQUARE LOZENGE ROUND

GRAVER # SWISS # HIGH- STEEL CARBON STEEL THICKNESS MM GRAVER # CARBON STEEL THICKNESS MM GRAVER # CARBON STEEL THICKNESS MM GRAVER # CARBON STEEL THICKNESS MM

36300 1.8

36301 2.0

36303 2.4

36306 3.0

3.2

36307

62 36172 1.7 4 36194 2.00 3 36163 1.75 52 6 0.60 36321 8 0.80 36322 53 10 1.00 36323 54 12 1.20 36324

63 36173 1.9 6 36196 2.50 4 36164 2.00 16 1.60 36325 20 20 2.00 36326 4 2.54 36335

65 36175 2.3 10 36200 3.25

ONGLETTE SWISS YELLOW TANG GRAVERS


PRE-SHAPED HIGH-SPEED

PRE-SHAPED HIGH-SPEED

GRAVER # SWISS # THICKNESS CODE

50 2 0.20 36319

51 4 0.40 36320

PRE-SHAPED HIGH-SPEED PRE-SHAPED HIGH-SPEED

FLAT

KNIFE

GRAVER # SWISS # THICKNESS CODE

GRAVER # THICKNESS CODE

28

PRICE BREAKS ON ONE DOZEN GRAVERS

GRAVER # SWISS # THICKNESS CODE

36 2 0.20 36308

5/0 4/0 1.16 1.24 36327 36328 37 4 0.40 36309

LA C Y WEST SUP PL IES LTD. 604-669-5229

18 1.80 36340

20 2.00 36341

1 22 2.20 36342

38 6 0.60 36310

3/0 1.35 36329

$12.95 each 2/0 0 1 1.45 1.58 1.78 36330 36331 36332 8 0.80 36311 39 10 1.00 36312 40 12 1.20 36313

SWISS YELLOW TANG GRAVERS 5 2.74 36336 6 2.94 36337 7 3.14 36338 8 3.36 36339

$12.95 each

24 2.40 36343

2 26 2.60 3634301

www.lacywest.com

Looking for a Graver you cant find? Call us. Most popular listed - over 1000 styles.

3 28 2.80 3634302

41 14 1.40 36314

2 1.94 36333

30 3.00 3634303

16 1.60 36315

3 2.16 36334

32 3.20 3634304

42 18 1.80 36316

43 20 2.00 36317

45 24 2.40 36318

SWISS YELLOW TANG GRAVERS $12.95 each

SWISS YELLOW TANG GRAVERS

Toll Free 1-800-6 6 7 - 4 11 8

$12.95 each

CZ MASTER SET - Diamond Colour Grading Set When it comes to determining diamond colour, the master set by GemOro really makes the grade. Each stone in the set has been electronically graded in the Grand Colorimeter. Certified by gemological laboratory A.G.A. 0.50 or 1 CT. Carat size stones . Colour grading approved UV inhibiting Acrylite container. White and yellow gold tiffany display ring stone holders. A Grand Colorimeter Colour Grade Certificate with each stones weight proportions and ID number. CERTIFIED AND REGISTERED Certified and registered cubic zirconium master set. Easily and professionally colour grade Each stone is electronically graded. $ 239.95 50pt. 5 Stone Set ( E, G, I, K, M) diamonds with these master stones. Each 1925 stone is expertly graded to master 1926 $ 239.95 50pt. 5 Stone Set ( F, H, J, L, N) diamond colour standards by GemOro 1930 $ 349.95 50pt.10 Stone Set (E, F, G, H, I, J, K, L, M, N) Instruments. The individual colour of each 1945 $ 319.95 1CT. 5 Stone Set ( E, G, I, K, M) stone is laser inscribed on the stones 1946 $ 319.95 1CT. 5 Stone Set ( F, H, J, L, N) table for easy viewing with a 10x loupe. 1950 $ 395.00 1CT.10 Stone Set (E, F, G, H, I, J, K, L, M, N)

GEMOLOGICAL INSTRUMENTS

The Ceres CZeckpoint Diamond Tester

Accurately measures the quality and quantity of light reflected through the stone, thus giving you an instant reading of its reflective index. PRM can therefore identify the nature of every uncoated stone. For your easy reference we have included a Reflectivity Chart. Instantly separates Diamond from all known simulants including Synthetic Moissanite. ONE YEAR WARRANTY.

PRM - Presidium Reflectivity Meter $249.95

Diapro diamond tester utilizes the feature of high thermal conductivity of diamond. It effectively and quickly distinguishes natural diamond from diamond simulants, except synthetic Moissanite which has similar thermal conductivity to Diamond. Equipped with ultraviolet light to test fluorescent reaction of stones or to detect counterfeit bills. JEM2 - $119.95
Presidium GEM TESTER Colour stone Estimator provides a. quick and easy way to identify diamonds and separate the most popular coloured gemstones from one another. The solid state probe pen requires no warm up time between tests and includes a built-in metal detector which will alert you if you accidentally touch the mount instead of the stone. Can be used with cut stones, mounted stones and even rough stones. This instrument does not distinguish between natural and synthetic stones. Can easily distinguish sapphire vs tanzanite, Iolite, spinel, citrine, topaz, tourmaline, emerald vs jadeite, garnet, jadeite vs garnet, chrysoprase, quartz, ruby vs spinel, garnet, topaz vs aqua, amethyst, citrine, spinel vs garnet, gemstone vs glass.

Diapro Jem 2 Diamond Tester w/ UV Light

PGT

Gem Tester

$279.95

ONE YEAR WARRANTY

The most advanced diamond tester on the market. Pocket size comes with a black carrying case. The latest in surface mount component technology. Audible and visual indicator of genuine diamond. Ceres diamond testers are the best on the market with superior electronics and design.

Czeckpoint - $159.95

LD909 - Chelsea Filter - $59.95 ECF - Econo Chelsea Filter- $39.95 Helpful in identifying certain red, blue and green stones. Used to determine whether a stone is synthetic or natural. Can also detect dyes in certain stones. A177 - Ruby Filter - $59.95 A136 - Jadeite Filter - $59.95 560507 - Dichroscope - $49.95

GEMPRO POLARISCOPE 0503 - $395.00 Visually shows if a stone is doubly or singularly refractive. Also used for identifying Moissanite and detecting strain in diamonds. Precision glass lens, as opposed to plastic. Includes light source.

Tester. Portable 9 Volt battery. and audio indications. 1 Year Warranty. Ease of use. Very popular Jewelers Fave. Low battery warning. Visual

Moissanite and Diamond

DiamondNite

DN1

$269.95

test results are indicated by visual light and audible tests. Pocket size. Low batteries indicator. Metal alkaline (AAA) batteries.No waiting time between

beeps. FEATURES (a) DiamondMate-A operates on

to instantly verify the authenticity of diamonds. The

The Presidium DiamondMate

Utilizes proven thermal conductivity testing method

continuous beep. Low battery consumption. DiamondMate-A 1 year factory warranty.

detector - intermittent beep. Measured diamond -

PDMTA

P ri c es i n C a nadian Funds/Call for Confirmation/Prices subject to ch a n g e .

$169.95

Combined thermal and electrical conductivity from our patented technology. The measuring probes together with the electronic circuits are designed to pick up and segregate data collected from the stones via a customized micro-controller. Within a split second, the test result will be displayed. No waiting time between tests. Clear LED display for diamond, moissanite, simulants and metal. Built-in metal detector. Low batteries indicator (AAA). Automatic power down. 1 year factory warranty

The Presidium Multi Tester (PMUT)

Presidium Moissanite Tester

(PMT11) This tester is developed with the sole objective of identifying synthetic Moissanite (Silicon Carbide). and uses the technology of capacitance for the capacitive measurement of electrical displacement. The measuring procedure is very simple. By touching a highly sensitive measuring probe, made of special grade polymer, the reading is instantaneous.

PMUT

$349.95

PMT11

$149.95

www.lacywest.com

29

SR 005

GEMOLOGICAL INSTRUMENTS
Direct and easy readable scale of 0.005 intervals from nD 1.30 - 1.81. Accuracy 0.001 to be interpolated. Wide refraction element of special SCHOTT / ZEISS LaSF colourless glass. Large 5x12mm contact surface, made of precisely polished high-end special glass LaSF.Resistant to scratches and chemicals. True sodium wavelength 589nm monochromatic interference filter. Polarizing filter and contact liquid included. Length and deliniation of STANDARD Refractometer SR 0.005 scale compared to other refractometer scales. GIA -(USA) 0.01 1.3 - 1.82 EURO-ASIA 1.30-1.81 0.01 EICKHORST 1.30-1.82 0.005* EICKHORST GIVES GREATER RANGE. R.I. Liquid included. Same specifications as Standard but has a some extra features: Liquid included. Dimmer LED intensity dimmable to increase contrast for easier reading. Plug in Power Supply Selectable world-voltages 100 - 120 / 220 - 240 Volt. 20 Watt dimmable halogen-quartz cold light (2000)Hrs., Polychromatic white light . To illuminate all refractometers with monochromatic filter. Eyepiece at comfortable level from table top. Refractometer set-up by two security plugs mounting to top side of Modul 3.

Refractometer Standard SR005

Refractometer GLD 0005

Modul 3-S Refractometer W/IIIuminator

Eickhorst SPO-HR

Modul 4

Call for Price Quote on Eickhorst Products. Canadian Distributor for Eickhorst Finest Gemological Instruments made, all parts made in Germany of highest industry standard.
- Cool, diffuse fluorescent lamp Polariscope Modul 4

Spectroscope - #104007 - $119.95

Spectroscope SPO-HR - High resolution prism spectroscope optical system - Directly readable wavelength scale - High quality precision slit, fine adjustable - Dust protection by front glass

The spectroscope breaks up the light being transmitted from a gemstone into its spectral colors, which allows the gemologist to see the various wavelengths that are being absorbed by the gemstone. Thereby allowing the gemologist to know what elements are contained in the gemstone that are causing the absorption.

- Flicker-free high frequency accessories

- Colour of light 6,000 Kelvin Daylight

- High colour rendering index

- Extendable with various optional

- Operation by electronic ballast

Eickhorst Gem Lab

professional, Moduls lock together. Spectroscope Modul 5/300, Modul 6 U.V. Lamp, Modul 1 Refractometer and Polariscope. State of the art in applied Gemological Technology. Call for pricing.

A complete gem lab for the

Optics High power fibre optic darkfield. Stereo Zoom magnification range with 10X , 6.5X - 50x or with 16X eyepieces and objectives. High-end precision and quality. Excellent for Digital Photomicrography.

Binocular Gemmaster Stereo Zoom Microscope with ZEISS

Trinocular Gemmaster Microscope with ZEISS


Optics. Extendable up to 250x, with optional eyepieces and objectives. Made in GERMANY

Binocular SYNTEST Horizontal StereoZOOM ImmersionScope

Stereo Zoom

Using the LEICA Stereo Zoom optical head easily changed over from Gemmaster darkfield base.High Intensity 180 swivelling illuminator, electronically dimmable and with iris diaphragm for additional light adjustment. Including two immersion cells of 40mm size. Immersion liquids of nD 1.57 and nD 1.66 refractive index. U-type polarizing unit. Can use for photomicrography.

Zeiss g DV4 Microscope

30

Made in GERMANY

L A C Y WE ST SUP PLIES LTD. 604-669-5229

All Eickhorst Microscopes are of the highest quality. All parts made in Germany. Professional Instruments

Darkfield/brightfield microscope with additional incident daylight illuminator, electronically dimmable and switchable as well. Iris Diaphragm for additional light adjustment. Magnetic stoneholder, to be placed left or right side. Unique Ringholder included. StereoZoom magnification range 8X...32X, extendable up to 64X with optional objectives. German made durable and precison engineered.

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

GemOro Elite 1067

GEMOLOGICAL INSTRUMENTS
GemOro Elite

- Superior Japanese optics - 10x - 67x zoom microscope, including built-in additional overhead light source and new European base. 1584 $1395.00

- Superior Japanese optics 10X to 30x magnification. Darkfield/Brightfield illumination with sliding baffle. Iris Diaphragm. Comfort Eye guards , Dust Cover. 1574 $399.95

Presidium Digital Leverage


- Solid state electronics - Digital readout - Harden platform - 0.01 resolution - Touch button zeroing - mm/karat conversion

Diamond Papers 3 Ply


Code 573 577 Use For #2opal Opal Papers 574 Diamond Diamond White White

Outside Inside Blue White Blue

PEGG

$329.95

Packages of 25

#2Diamond Blue

$5.95

Pearl Drilling Vice VO91 $29.95


-

Presidium Dial Gauge


Measure up to 23mm < 0.05mm instrumental error Ring size measurement Direct karat reading Harden platform Easy 3 way measurement

Nickel-plated adjustable pearl vise. Holds all popular size pearls secure for drilling. Knurled locknuts provide quick clamping and releasing action.

ARROWS

Gemstone Parcel Box

PDG

$245.00

BT1 Black $15.95 BT1 Red $15.95 Double door gem display box with removable gem containers (10pc). W3019 W3001 W3002

207 Small $19.95 2071 Small Wide $19.95 206 Large $21.95 2061 Large Wide $21.95 Red cloth interior, strong wood frame covered with black leatherette. European-style split top with fasteners. 8501 Large $19.95 8502 Small $14.95 Black simulated leather cover and adjustable partitions. Brass front clip.

This is a simple but highly important gemological tool that allows the gemologist to view the separate colors that a gemstone produces, as it selectively absorbs certain wavelengths of light, while allowing others to pass through to the viewer.

Dichroscope - $69.95 -

HAS - Cute Viewer (small) $29.95 A1015 - Large Viewer - $39.95

Displays the visual hearts and arrows symmetry that can be viewed when looking at brilliant cut diamonds. Only perfect grade cut and polished will show the hearts and arrows.

HEARTS & ARROWS LOUPE

HEARTS

The perfect way to determine whether diamonds have been fracture filled. Portable darkfield, allowing user to identify the fillings and flaws in diamonds. Featuring a high intensity miniature darkfield and distortion-free 18mm 10x triplet.

Darkfield Diamond Viewer with Maglite

DFL

Jo-Di Gauge 35551

We carry Best Quality Swiss Diamond Tweezers


$59.95

Rinse and clean diamonds and precious gem stones. Stainless steel inner container easily lifts out of external glass jar. A screw cap glass jar prevents evaporation of cleaning liquid.

Diamond Washing Cups

$69.95

DI103 - $9.95

Gem Display Box Security Wallets

Diamond Sieves

Deluxe Wood Parcel Box Single Gem Display Box


WS1 Rosewood

W207 Small $29.95 W206 Large $39.95 Rosewood finish with white faux leather lining and adjustable inner partitions. $10.95

Waist adj/strap Waist wallet/Belt Shoulder Wallet

$12.95 $12.95 $12.95

Long lasting chrome plated sieves to sort Diamonds and other stones. 545A - 23plates, 32mm - $49.95 545B - 42plates, 32mm - $69.95 545C - 23plates, 47mm - $59.95

Book of tables and gauge used for estimating weight of any shape stone mounted or loose.

Helps to distinguish a natural ruby from a synthetic ruby.

Ruby Filter A177 $59.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

550 551 552 553 554 555 560

Diamond Shovel
XSmall Small Medium Large XLarge XXLarge Curved

$1.50 $1.75 $1.95 $2.50 $3.00 $3.50 $3.95

549-Diamond Sellers-$49.95
Ideal for closing the sale without using expensive stones. Cubic zirconiums are mounted on stainless steel folding arms. Includes protective cover. 10 sizes from 0.10 to 2 carats.

Diamond and Stone Gauge 35558

Made of aluminum, will not scratch. A. Millimeter and carat measures for round cuts. B. Contains 4 discs, measures round and baguette cuts from 1/100 to 2 ct.

35560

$5.95

$3.95

www.lacywest.com

31

GRS PRECISION TOOLS


GraverMax SC
The tradition continues with this new design. This system shares many features with the GraverMach including its new air porting technology, quiet operation and a more ergononmic and compact chassis. The difference is the GraverMax SC has no throttle bias adjustment valve.

New air pulse porting technology (patent pending) inside the control unit gives each handpiece excellent range of power with perfect control throughout an expanded range of impact speeds. The GraverMach features 400 to 8000 strokes per minute, a newly developed throttle bias adjustment valve for tailoring throttle response to your work and dual-stage precision air regulator. Advanced ergonomics include front air pressure adjustment, quick change air couplings, rear mount throttle connection, and an advanced valve pulse unit that operates with virtually no noise or vibration. The GraverMach has connections for two impact handpieces plus an auxiliary air connection for other air tools including the GRS Ultra 850 Rotary handpiece. Requires compressed air 1.4cm at 45 psi minimum ( 40 liters per minute at 3 bar minimum. Two Year Warranty. Handpieces sold separately. 004960 GraverMach (less handpieces) $1260.00 004850 850 Ultra High Speed Rotary Handpiece $462.95 1600-2400 IMPACTS PER MINUTE * BUILT-IN AIR COMPRESSOR

GraverMach New Ultimate Power

Requires compressed air at 1.4 cm at 45 psi minimum (40 liters per minute at 3 bar minimum. Includes standard U.S. style IEC electrical cord plus Schuko adapter, foot control, multi-mount air filter and tools 100-240 Volt, 50-60 Hz. Handpieces sold separately: all GraverMax and GraverMate handpieces can be used with this Graver Max SC $1030.00 machine. 004980 New GRS Magnum Handpiece Unmatched combo of power and control in elegant, compact handpiece. This is a breakthrough in impact power from fine to heavy. Measures only 2.8 inches, exceeding all other models. Fine control with shading capability significantly better than any other handpiece. Two knobs are included with handpiece.(palm knob and oval knob) 004940 Magnum Handpiece Deluxe Set $346.95

Small block weighs 19 pounds, 25% heavier than look-alike blocks. Gives rotational freedom. Adaptor Plates offer holding methods for many different shapes. Inside is a double ball bearing system for smooth rotation without looseness or wear, and a brake that allows you to control the rotational resistance. Optional: thirty-piece attachment set and leather faced ring clamps 003530 Upper jaw plates, 4 pins/wrench $ 451.95 003531 With Attachment Set $ 510.95

GRS Engraving Block Standard

Large block weighs 30 lb. This heavy block adds more stability to your work, especially when using power tools or chasing hammers. Inside is a massive ball bearing system that turns smoothly and prevents internal wear. Has rotational brake & adjusts from free to solidly locked. $ 599.95 003021 Upper jaw plates, 5pins/wrench $ 647.95 003522 With Attachment Set See Inside Ring Holder for Vises.

GRS MagnaBlock

Grinds your gravers and tools quickly without heat. The calibrated dial on the GRS fixture lets you set the angle.

Pitch Bowl Fits into blocks. Filled with pitch. 003022 $ 68.95 Attachment Set 30 pieces. Ring clamps included. 003520MPV $ 115.95 Super Pins 3/8 shank. Can hold larger pieces. 003547 $ 6.95 Super Pins 1/4 shank. Can hold larger pieces. 003546 $ 10.95

Attachments for GRS Blocks.

001952 - GRAVERMEISTER SPECIAL PACKAGE Includes GraverMeister, Quick Change 915 handpiece, Quick Change 712 handpiece, Quick Change handle, Quick disconnect kit and manual. - $1995.00

The GraverMeister is recommended when you dont have access to compressed air. If you do have a compressed air supply, you may want a GraverMax or GraverMach. The GraverMeister is an air tool that makes its own special air pulses. These pulses move a hammer piston back and forth inside the handpiece creating impact power. A foot pedal lets you vary the power instantly as you work. The impact rate is adjustable from 1600 to 2400 impacts per minute. With the GraverMeister, you can engrave deeply in steel and delicately in gold, carve wood effortlessly, set large and small stones with confidence, texture metal quickly, sculpt stone precisely and more. Cuts smoother, is completely oil-free and features advanced Quick Change Handpieces. Unit includes air compressor unit, foot control, four tools, instructions. 115 volts, 60Hz. Handpieces order separately. Two Year manufacturer Warranty.

GraverMeister

Sharpen gravers and tools without heat in seconds. Gives a sharper, stronger tool edge that makes brighter cuts, leaner lines and scrolls, more precise beads and finer shading. Power hone is fast, accurate and produces longer lasting tools. Unit has heavy steel housing, continuous-duty motor and double-bearing spindle. Power Hone uses diamond wheels which last for years and stay flat for accuracy. 001525B 003510 Power Hone with 600* 6" Complete kit $ 437.95 $ 857.95

Diamond Power Hone Easy to use.

Complete System 3 Package

32

L A C Y WES T S UPP LIES LTD. 604-669-5229 Toll Free 1-800-66 7 - 4 11 8

002755

002754NF

002753

002415

002139

002055

002138

003100

Diamond spray COARSE

Diamond spray FINE

Diamond spray MEDIUM

6" Ceramic wheel

6" Grit 1200* fine

6" Grit 600* medium

6" Grit 260* coarse

Fixture only Standard

$ 28.95

$ 28.95 $ 28.95

$ 220.95

$ 102.95

$ 105.95

$ 115.95

$ 105.95

System 3 is the most affordable GRS air impact tool. Its relatives, GraverMeister, GraverMach, GraverMax produce special air pulses to control their impact handpieces. System 3 is a piston and port design which self-oscillates using normal compressed air. So, its simpler and less expensive. Comfortable, lightweight and delivers good impact power. Lets you engrave, set stones, hammer, texture and carve wood and other materials. The foot control starts the impact and varies its force. You can tune System 3 for fine to heavy work using the regulator to provide more or less air pressure. Gives you a wide range of impact power. Handpiece,Foot Control, Regulator, QC holder, 6 steel points, and instructions. 004780 Standard Package $ 514.95 004781 Deluxe Package $ 556.95

www.lacywest.com

GRS PRECISION TOOLS

Gravermeister Impact andpieces K. 004563 Bulino Handpiece - $210.95 Smallest, finest handpiece. Perfect for small stone setting, fine engraving. Set screw chuck holds square tools 1.9mm - 2.5mm and round tools .2.2-3.0mm dia. Handpiece 71mm long, wt. 43g. L. 004509 Large Handpiece - $249.95 Very powerful. Designed for heavy metal engraving, wood carving, other demanding jobs. Two jaw chuck holds tools 1.6-4.8mm round or square, and standard gravers. Handpiece length 114mm wt. 224g. M. 004612 612 Hammer Handpiece - $279.95 Wide power range. Great for stone setting, hammering, medium to deep engraving. Stainless steel construction. Set screw chuck holds square tools up to 2.5mm and round tools to 3.3mm. Handpiece length 114mm, wt. 156g. N. 004611 611 Hammer Handpiece - $279.95 Same as 854612, but for threaded hammer tips only. Includes one tip. O. 004915 QC 915 Handpiece - $294.95 Huge power range,plus fine control. 6 QC holders, 2.6 long. Stainless steel. Fits most engraving and stone setters needs & deep engraving. P. 004712 QC 712 Handpiece - $294.95 Wide power range,perfect for stone setting, hammering, medium to deep engraving. Quiet rear exhaust. Q is 004509 already listed. See L. Oil for the Sil-Air Compressor. 22oz refill 022-163 $23.95

Sil-Air

GraverMach/GraverMax SC Impact Handpieces A. 004609 609 Hammer Handpiece $ 252.95 same as 854610 but for threaded hammer tips only. Includes one tip. B. 004610 610 Hammer Handpiece $ 252.95 Wide power range. Great for stone setting, hammering, medium to deep engraving. Stainless steel construction. Set screw chuck holds square tools up to 2.5mm and round tools to 3.3mm. Handpiece length 114mm, wt. 156g. C. 004506 Large Handpiece $ 226.95 Very powerful. Designed for heavy metal engraving, wood carving, other demanding jobs. Two jaw chuck holds tools 1.6-4.8mm round or square, and standard gravers. Handpiece length 114mm wt. 224g. D. 004508 508 Handpiece $ 215.95 Medium power. General purpose for jewellers and engravers. Two-jaw chuck holds tools 1.6-3.6mm round or square, and standard gravers. Handpiece length 114mm, wt 102 g. E. 004710 QC 710 Handpiece Same as QC 915 But for GraverMax and GraverMate $ 294.95 F. 004720 QC 720 Handpiece Great for wood craving or heavy metal engraving or hammering. 6 QC Holders. $ 315.95 G. 004921 QC Monarch Impact Handpiece for ultra fine engraving including bulino and banknote styles. 6 QC Holders $ 304.95. H. 004901 QC 901 Handpiece Fits most engraving and stone setting needs including microscopic engraving, deep relief work and bead raising/hammer setting. Includes 6 QC holders. For GraverMate/GraverMax $294.95

Easily shape copper, silver and gold bracelets. Form flat strips of metal to a perfect C shape after you have engraved your design. The die seat is a soft alloy material that supports pressure from the die, but does not distort your work. Die can be reformed by heating 004725 - $229.95

Metal Former

Quiet Air Compressor No noise for you or your neighbors or customers. Sil-Air compressor incorperates European technology to produce the quietest compressor on the market. Its perfect for apartments, mall stores, bedrooms or anywhere air compressor noise is undesirable. In addition to its standard filter-regulator, this complete unit comes with a special oil-removal filter. 1.5 cfm, at 100 psi max. 1/2 hp,115 volts, 60 Hz, 4.9 Amps. 004678 Compressor $1365.00

Introducing the GraverSmith by GRS. This new power tool offers basic work capability and pneumatic impact power for stone setting and engraving at less cost than the more fully-featured GraverMach and GraverMax SC machines. Its ideal for production stone setters, multiple factory installations, and individual craftsmen on a budget. Item #004-895 - $795.00 A

The GraverSmith

Air Accessories Air Filter Oil Removal kit. Removes dirt and oil contamination from compressed air. 004579 $ 115.95

004801 for GraverMax/Mach $ 262.95 General purpose. Medium power and fine control for most stone setting and engraving. Ergonomic shape. Includes 3 QC holders, 71mm Long, wt. 123g.

Dual Angle Sharpening Fixture Adjusts to more angles, and holds more tools that the standard fixture. With two degree dials, you can set the elevation angle and the rotation angle of each tool. Now every tool or graver surface can be sharpened. Fixture is accurate and its degree dials are easy to read. Holds tools with or without handle, even those in QC holders. 003570 $ 231.95

B 003622 Knifemakers Contour Vice Special rubber lined chain-like linear jaws conforms to unusual and compound shapes.Grips firmly and securely totally adjustable. Wide range of depth and widths. Mounts onto any engraving block. $115.95 003623 Contour Vise Jaws Rubber lined jaws. Fast and safe way to hold unusual items for engraving or other important work. $68.95 C

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

GRS Tools help you master important skills in jewelry making, hand engraving and wood carving. The Gravermeister, GraverMach and GraverMax SC put you in control of bead raising, bright cutting, bezel and prong setting, plus the latest pav and channel setting techniques! Produce the same traditional results faster without tired muscles and worn-out nerves.

Stipple and Hammer Tools A. Diamond Point for glass and crystal stippling, jewellery texturing. 002123 $20.95 B. Threaded Hammer Tool Fits 854609 and 854611 GRS hammer handpieces. 011079 $19.95 C. Diamond Texture Tool Creates bright, sparkling texture on jewellery. Threaded steel shank. 002956 $37.95

Quick Disconnect Kit Allows quick switching of air handpieces. Includes one main body and two connectors 004615 $ 31.95

QC Quick Change Holders 004804 $ 18.95 Three (3) QC holders. 004806 $ 55.95 Ten (10) QC holders.

Softcover Books

022198 Firearms Engraving Theory $10.95

Scroll Design Template Kits available

022202 Jewellers Engraving Manual $13.95

022192 Basic Beginners Engraving $20.95

022199 Drawing Scroll Design $35.95

www.lacywest.com

33

GRS PRECISION TOOLS

BenchMate Work holding system for Jewellers. Stabilizes stone setting, speeds up soldering and simplifies jewelry repair. Special attachments turn Benchmate into an advanced soldering aid.

BenchMate Basic Includes basic benchmate holder, shellac pad, fixed mounting plate and hardware. 004542 $ 241.95
E F

BenchMate Deluxe Includes basic benchmate holder, shellac pad, narrow and wide solder fingers, third hand attachment, bench pin kit, fixed mounting plate and hardware. 004555 $ 309.95

BenchMate Plus Includes basic benchmate holder, shellac pad, narrow and wide solder fingers, two third hand attachments, bench pin kit, 4 solder station, fixed mounting plate and hardware. 004571 $ 379.95

004674

BenchMate Setters Package Includes basic benchmate holder, shellac pad, bench pin kit, inside ring holder, fixed mounting plate and hardware. $ 336.95

B H

G J

Inside Ring Holder This attachment adds inside ring-holding capability to any Benchmate. It gives 200% more access to the outside of the ring and keeps it from flexing while you work. Channel, bead and bezel settings are surprisingly easy using this inside holder. From the set of collets you select the closest size that fits inside the ring. The screw expands the collet to hold the ring securely. These hard plastic collets wont scratch or mark rings. With an extra collet set, you can double stack collets for extremely wide rings or hold several rings simultaneously for high volume work. 004589 Inside Ring Holder $ 80.95 Inside Ring Holder, 7 collets, expansion screw and wrench. 004616 Extra Collet Set $ 35.95

A. Narrow Solder Fingers B. Wide Solder Fingers C. Shellac Pad D. Pitch Cup E. Third hand attachment F. Sawing Plate (R or L) G. Bench Pin Kit H. Insulated solder clamp J. Extra plastic jaws (10) K. Solder station 4x4

BenchMate Attachments

004552 004553 004106 004660 004546 004680 004556 004592 004558 004569

$12.95 $12.95 $ 6.95 $27.95 $42.95 $34.95 $28.95 $57.95 $ 8.95 $34.95

003684 - with 30pc attachment set - $336.95

MicroBlock Ball Vise Workholding for engraving, stone setting and other precision work. 003683 - MicroBlock Ball Vise - $262.95

Multi-Purpose Vise Includes vise assembly and wrench. Fits any benchmate fixed mounting plate. Jaws are 2.3 wide, 1.6 tall and open to 1.8. Adjusts to any angle because it tilts and rotates in 2-axes. Uses same attachments as the GRS engraving block. 004628 $ 136.95 L

Inside Ring Holder for Vise This lets you hold rings from inside like the BenchMate inside ring holder. It works with all GRS engraving blocks and most vises. Great for stone setting and ring engraving. For extra wide bands get second set of collet and double stack. 004679 $ 52.95

Pitchbowl and Pitchcup The pitchbowl and pitchcup have a special material that softens when heated to hold small fragile or irregular pieces for engraving, setting and finishing. Fits any vise or engraving block. 003022 Pitchbowl $ 68.95 004660 Pitchcup $ 27.95

GRS Hand Ring Clamp Holds ring securely for stone setting, filing, finishing and polishing. Although similar to the benchmate holder, it is lighter for hand use. You can open and close the jaws by turning the bottom knob. Replaceable jaw inserts hold securely without marring. Made of solid aluminum or steel. 004625 GRS $54.95

Soldering with Benchmate solder fingers and third hand is more accurate and safer for you and your work.

34

L A C Y WES T S UPP LIES LTD. 604-669-5229 Toll Free 1-800-6 6 7 -4 11 8

Adjustable Graver Set These handles let you adjust graver length for more accurate and comfortable work. Set includes 3 coloured handles made from aircraft aluminum. 004670 $ 33.95

Ring Clamps Leather faced ring clamps let GRS Blocks hold ring securely from the outside. 003550 $ 24.95 Also available with 30-Piece Attachment Set.

Third Hand and Soldering Stations Precision soldering is made easy by holding parts in the exact position you want. These third hands can twist, rotate and bend in all directions. Special jaws are available for platinum and other high temperature work. GRS soldering Stations combine Third-Hands with durable non-asbestos solder boards. * #004570 Station is especially versatile because it also fits any Benchmate fixed mounting plate. L. 004568 Standard Third Hand on weighted base. $ 52.95 M. 004570 Double Third Hand Soldering Station $115.95 N. 004545 Short Third-hand Solder Station $ 80.95 P. 004689 Short Third Hand on weighted Base $ 63.95 004129 6 Solder Board $ 13.95 004130 4 Solder Board $ 9.95 004097 Tungsten Jaws $ 4.95

Shelf for Standard Engraving Block. (vise not included) 004578 Shelf $ 44.95 For MagnaBlock Vise 004665 Shelf $ 79.95

BenchMate Plates 004559 Optional mounting Adapter $ 27.95 004557 Fixed Mounting Plate $ 19.95 004666 Adjustable height bracket. Includes another fixed mounting plate that can be lowered up to 4 in 1/2 increments . $ 49.95

www.lacywest.com

Planishing/Polishing SILVERSMITH HAMMERS 37301 - 7oz - $64.95 37302 - 10oz - $63.95 37303 - 14oz - $64.95 37304 - 17oz - $63.95 Planishing

HAMMERS
BOXWOOD MALLET Excellent for removing dents and straightening and flattening metals. 1 diameter face 370183 - $6.95 Raising

Small End - 1 Large End - 1-1/16 Length - 4-1/4

373361 - $74.95

Planishing

37336 - 14 oz - $61.95 37350 - 7 oz - $58.95

EMBOSSING HAMMERS

Planishing

SPECIAL REQUESTS??? PLEASE FEEL FREE TO GIVE US A CALL AND INQUIRE. 1-800-667-4118
Raising

37335 - $64.95
Small End - 1 Large End - 1 Length - 4-1/16

GERMAN HAMMERS WITH HARDWOOD HANDLES

Small End - 1 Large End - 1 Length - 4

37332 - $65.95

Small End - 1-1/4 Large End - 1-1/4 Length - 4

37303 - $65.95

PRECISION FINISHED.

Small End - 1 Large End - 1-1/4 Length - 4-1/2

37329 - $72.95

37418 - $64.95
Small End - 1 Large End - 1 Length - 4-1/16

37110 37112 1165 37118 371191 371141 371181

Ball Pein General Use


3/8 5/16 3/4 1 1/2 3/4 1 Face Face Face Face Face Face Face

Dia.ECON. Dia.ECON. Dia.ECON. Dia.ECON. Dia.QUAL. Dia.QUAL. Dia.QUAL.

$ 5.95 $ 6.95 $ 7.95 $ 8.95 $29.95 $39.95 $49.95

No. 37534 37536 37582 37584 370181* *

Mallet with Detachable Heads,wood handle.


Faces Face Dia. brass & fiber 9/16 brass & nylon 9/16 brass & fiber 5/8 brass & nylon 5/8 brass & nylon 1/2 With aluminum handle. Extra Heads can be ordered Length 2 2 2-5/8 2-5/8 2 Price $8.95 $8.95 $9.95 $9.95 $9.95

separately.

No. 388 390 37184 37188 370410

Chasing Hammer

German
Price $14.95 $14.95 $41.95 $48.95 $ 6.95

Dia. 1 head ECON.India 1-1/4 head - ECON 1 headQUAL. 1-1/4headQ U A L . Pistol Handle

No. 37700 37701 37702 37703 37704

Rawhide Mallet

Dia. Length 1x2-1/8 1-1/4 2-3/4 1-1/2 3 1-3/4 3-1/8 2 3-1/4

Goldsmith
German

Price $15.95 $19.95 $23.95 $29.95 $32.95

Small End - 5/8 Large End - 5/8

37220 - $67.95

Prices in Canadian funds/Call for Confirmation/Prices subject to change.

Length - 3-1/2

Looking for something you cant find? Please call us. We have sources worldwide to secure almost any tool needed. There are over 200 different silversmithing stakes, anvils and hammers available. We can special order for you.

No. 37707 37708 15003 15004

Plastic Mallet-wood handle


Dia. 1-1/4 head 1-1/2 head 1-3/4 head 2- head

Price $10.95 $11.95 $15.95 $19.95

Riveting Hammer
No. H391 37216 372201 Dia. Econo 1/2 5/8

German Price $ 8.95 $45.95 $19.95

Length Square Head 3-5/8 German 4-1/4

Using Quality Tools will give you Quality Results.

37530 Brass Head Mallet


37530 1/2 dia. 2Long

$8.95

www.lacywest.com

35

CODE DA2 DA3 DA4 DA5 DA7 DA10

OPTIVISORS

LOUPES AND MAGNIFIERS


POWER 1 1/2x 1 3/4x 2x 2 1/2x 2 3/4x 3 1/2x WORK DISTANCE INCHES 20 14 10 8 6 4 $39.95 $39.95 $39.95 $39.95 $41.95 $41.95

Most popular head magnifier, comfortable headband, adjustable to fit any size. Prismatic lenses are ground and polished. Lens plates can be ordered separately. LENSES ONLY - $ 31.95 (Order by power strength.) OPTILOUPE LP1 - $ 10.95 Fits on either side of optivisor and adds 2-1/2x to the magnification. Optiloupe attachment can be adjusted away from lenses when not in use.

29260 29261 29262 29263 83500 29243 29244

B & L HASTINGS TRIPLET Lens, high quality prismatic. Eliminates colour degradation and gives an undistorted wide view. Finest Loupe.

Bausch & Lomb JEWELLERS LOUPES


7x 10 x 14 x 20 x $55.95 $59.95 $67.95 $69.95 $39.95 $42.95 $47.95

JEWELLERS TRIPLET LOUPES 18mm 10X


- Loupe with out rubber grip $27.95 - Loupe with rubber grip $29.95

Quality lenses

B & L CODDINGTON Single Lens Loupe Single lens with a grooved diaphragm around its circumference. High definition, distortion-free view.

18mm lens ground and bonded together to give an undistorted view, and no colour aberation, complete with leather case.

- Available in Plain or Fancy (colour)

EYE LOUPES
CODE X10010 X07015 X05020 X04025 X03330 X03035 X02540 X02345

10 x 14 x 20 x

TRIPLET HASTINGS LOUPE 20.5mm - 10X Quality lenses


- Available in Plain or Fancy (colour) - Loupe with out rubber grip $36.95 - Loupe with rubber grip $39.95

CODE POWER DISTANCE LENS PRICE 29080 4 X & 5 X 1-1/2 & 2-1/2 Double $32.95 29081 8 X & 13 X 1/2 & 1-1/4 Double $36.95 29075 10 X 1 *Triple $61.95 29130 10 X 1 Single $19.95 29131 7X 1-1/2 Single $19.95 29132 5X 2 Single $17.95 29133 4X 2-1/2 Single $16.95 Bausch & Lomb: the best optical lens. Double-lens provides two lenses, one removable. Single-lens in feather light soft black casing. *Colour
Corrected

BAUSCH & LOMB LOUPES

Inexpensive watchmakers type loupe in black plastic holder. Good quality lens.

POWER 10x 7x 5x 4x 3.3x 3x 2.5x 2.3

WORK DISTANCE 1 1 1/2 2 $4.95 2 1/2 each 3.3 3 1/2 4 4.5

Hexagonal Lens measures 21 mm, extra large corrected. Supplied with leather carrying case.

view. Optically corrected for distortion and colour

MAGNI-SPECS
POWER 1.75 X 2.25 X 2.75 X 2.50 X

CODE 29796 29797 29798 29731

Ophthalmic quality, hard-coated prismatic magnifying lenses. ABS plastic brow bar, nose piece and post. Zyl temples. Can be worn alone or over glasses. Lenses flip up when not in use. Case included. DISTANCE DIOPTER 14 +3D - $45.95 8 +5D - $51.95 6 +7D - $45.95 7 (clip on your glasses, scratch proof) $85.95

36

Note: the higher the power, the shorter the depth of field. Clarity of gemstones is viewed at 10x. Colour-corrected lens are used when viewing diamonds.

How to Select Magnifiers. The symbol x denotes the power of the lens. A 3x magnifier triples the size of an image. In addition, a magnifier is also classified by working distance. For example, 2x at a working distance of 5 means that the magnifier will provide double magnification and be in clear focus when held 5 from the object.

Heavy base prevents movement and multi-position swivel clamp permits adjustment for best viewing, leaving both hands free for more effective working. 1016 - $14.95

MAGNIFYING

ON STAND

GLASS

TWEEZER/MAGNIFIER COMBO 99831 - $9.95

Hands free combi-magnifier with 3 lenses. Instanlty adjustable comfort headband. Lightweight and durable with a large viewing area and easy to clean lenses.

OPTICAL SUPERVISOR

Comes with four lens plates - 1.2x, 1.8x, 2.5x and 3.5x. Choose the lens plate according to the magnification and working distance required. ELP55000 - $49.95

VERSATILE HEADBAND MAGNIFIER

LA C Y WEST SUP PL IES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

LO100 - $19.95

MANDRELS AND SIZERS


CODE 8063 8064 8065 SHAPE ROUND ROUND ROUND OVAL OVAL OVAL SIZE (mm) SMALL MEDIUM LARGE SMALL MEDIUM LARGE PRICE $ 69.95 $ 99.95 $ 99.95

BRACELET MANDRELS ITALY & USA


$129.95 $139.95 $199.95

STM - SHORT TAPER ROUND - $14.95 SR - ROUND - $22.95 SO - OVAL - $21.95 SRT - RECTANGULAR - $22.95 SSQ - SQUARE - $22.95 STD - PEAR - $21.95 STRI - TRIANGLE - $22.95
DESCRIPTION BLACK PLASTIC ALUMINUM

BEZEL MANDRELS

8066 8067 8068

Made of Hardened Steel.

BRACELET MANDRELS WITH TANG


CODE OTBM OSBM RTBM RSBM SHAPE OVAL STEPPED OVAL ROUND STEPPED ROUND SIZE 6 1/2 6 1/2 6 1/2 6 1/2 PRICE $55.95 $55.95 $52.95 $54.95

USA

CODE 533 530

RING MEASURING STICKS

SIZES SIZE 1-15 SIZE 1-15

NECKLACE FORMING Made of cast iron in Europe Small #P70000 $99.95

PRICE $ 6.95 $29.95

GRADUATED STEEL RING MANDRELS


CODE SIZES STYLE 1 - 16 NO GROOVE RL16 1 - 16 GROOVE RG16 BMX 16 - 24 NO GROOVE R16STP 4 - 16 STEPPED RSQMOD STIRRUP RSQ SOFT SQUARE E16 SOFT SQUARE ITALIAN LCCSQ SQUARE CUT CORNER LOCT OCTAGON LRT RECTANGLE LHEX HEXAGON LSQ SQUARE LTRI TRIANGLE OM OVAL TD PEAR CCRECT RECTANGLE CUT CORNER CCTRIAN TRIANGLE CUT CORNER PRICE $25.95 $25.95 $44.95 $39.95 $25.95 $25.95 $89.95 $49.95 $49.95 $44.95 $49.95 $39.95 $44.95 $29.95 $29.95 $44.95 $44.95

Holder can be fitted to the bench to hold tag mandrels.

USA

Medium #P70100 $129.95 Large #P70200 $139.95


CODE TYPE

All-purpose gauge for measuring flat stcok for proper size ring & bracelet shanks.

SHANK SIZE & BRACELET GAUGE 350425 - $5.95

FINGER RING SIZERS


SIZE

RING CLAMP SYSTEM

546 PLASTIC 1-13 PLAIN 534 METAL 1-13 FLAT PLAIN 535 METAL 1-13 HALF ROUND 540 METAL 1-15 EXTRA WIDE 25800 PLASTIC Pop out x10 1404A - MANDREL SIZING SET 1-15(half sizes) Metal Sizers are brightly plated with easy to read

STYLE

$ 1.95 $17.95 $17.95 $21.95 $ 9.95 $59.95 numbers.

PRICE

This multi-positioning collet system securely grips rings while distort ring shanks. Designed for delicate filigree

allowing you to work on entire perimeter. The split collet fits inside and tapered rings, or holding rings with stones while setting,

ring, spreads to tighten and holds ring in place. Will not mark or

Wooden Box with sliding top.

Prices Listed in Canadian Funds/Call for Confirmation/Prices subject to change.

CAMELVAS

nine collets sizes 4 to 13 and allen wrench.

pav, bezel setting and polishing. Hardwood handle. Comes with

Measures from 15 23 cm in circumference, width 16mm. Made in nickle steel.

BRACELET SIZER

$39.95

782491

$19.95

Yellow and White Gold Fill NA07 MENS YGF XL $24.95 DZ NA08 MENS WGF XL $24.95 DZ NA02 MENS REG. YGF $21.95 DZ NA06 MENS REG. WGF $21.95 DZ NA01 LADIES YGF $19.95 DZ NA05 LADIES WGF $19.95 DZ SINGLE RING GUARD $2.95 EACH

RING GUARDS

www.lacywest.com

37

P O L I S H I N G
1/2 HP motor 110 or 220 volts 3450 RPM. 45 lb. SL-400 On/Off switch Heavy cast iron base. Adjustable light. With 3 Outlet for connection to a Dust Collector Spindle supplied.

SL400 $495.95 Split Lapper

M A C H I N E S

Floor Model Polishers Heavy-Duty Industrial Sit down polisher and dust collector

Split Lapper Machines use Paramount Split Lap and Lap Buffs
1/2H.P. or 1 H.P. with 2 Polishing Motors.Heavy wall sealed cabinets, ensures maximum collection efficiency with minimum noise and no vibration. 3450 RPM 60 Hz/ 1 Ph Stack on silencers are standard. With filter bags, unit offers a workable formica covered working surface measuring 22x40. 400 CFM through two inlets connected to hoods.

New Cartridge System Dust Collectors State of the art design, consists of easily removable cartridge system that can capture dust down to 0.004 micron and reduces noise and vibration. CFS-4 2 Station $1695.00 CFS-8 4 Station $1895.00

15-1/2 W x 14-3/4 D x 21 H Motor - 1/2 HP 110V-3450 RPM Suction 1000 C.F.M 14 Filter Bags - Two 3 flanges 22 W x 20 D x 38-1/4 H Motor - 1 HP 115V-3450RPM Suction 1000 C.F.M 1 Phase 24 Filter Bags - Four 3 flanges Built-in Silencer

DUST COLLECTORS NEW SPECIFICATIONS: DC800 $929.95 85 lb.

DC802 $2195.95 150 lb.

Floor Model Polishers Heavy-Duty Sit down polisher and dust collector with 1 H.P. Polishing Motors. Heavy wall sealed

External metal foot shaker for filter bags. Larger Units available 3-HP, 7-1/2 HP.

MMD-948 Mini 1/2HP.Dust Collector 2 x 1/2 H.P. polisher motors 200 lb. 400 CFM Motors 450 lb.1000 CFM

FMD- 936 1 H.P. Dust Collector 2 x 1/2 H.P. Polisher

NEW POLISHING UNIT NOW AVAILABLE WITH SUPER FLOW POLISHING HOOD TOTALLY ENCLOSED Super Flow Hood 14 W x 15 D x 15.25 H inches. 25 lb.
B009 - $395.95
THESE HOODS ARE GREAT, PROTECT METAL WHILE POLISHING.

$3395.00

$1795.00

Single Floor Model Polisher Dust Collector

cabinets, ensures maximum collection efficiency with minimum noise and no vibration. Stack-on silencers are standard. With filter bags, unit offers a workable formica covered working surface 1000 CFM through two inlets connected to hoods. Wt. 400lb. FMD-940 - $3195.00

AGAINST LOSING ANY

Complete Unit - MMD948005 - $2395.00 One 1/2 H.P. Motor CFM 400 110 V/ 60 Hz / 1 Ph. also available in 1000 CFM 1 H.P. 38

L A C Y WE ST SUP PLIES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-66 7 - 4 11 8

MMD-946 - $1695.00

Heavy-duty all steel enclosure for sit down operation.With 1/2 H.P. Dust collector rated at 400CFM with one hood and and 3/4 H.P. polishing motor mounted on a formica counter top. Top measures 24x24. Two suction inlets connected to hood. Designed to capture particles down to 1 micron. If you dont have a lot of space in your workshop but need a professional polisher this is the perfect choice. Unit is designed for those who prefer the powerful suction of a unit with filter bags, 3450RPM. 190 lb. MMD-946

P O L I S H I N G
and Polishing Machine with Splash Hood Start your workshop now. Why wait? with lights.Mounted on steel table. Combination Lapping Machine

Leasing is available. Call for more details.

We also supply Paramount Split Laps and Compounds.

PBS426 4 Ft. Polishing Bench with two - 3/4 H.P. Motors and two Hoods. PBS430 4 Ft. Polishing Bench with one - 3/4 H.P. Motors and one hood and one Lapping Machine. PBS540 5 Ft. Polishing Bench with two - 3/4 H.P. Motors and two hoods. PBS544 5 Ft. Polishing Bench with one - 3/4 H.P. Motors and one hood and one Lapping Machine.

M A C H I N E S

Unit measures 11H x 33 1/2W x 22D. Comes with spindles Lights mounted under each side of hood. Easy to remove and replace filters. CFM : 465 Weight 73 pounds. 110V/60Hz/ 1Ph 47182 Filter - 12 x 32 x 2 $14.95 ea. We stock filters for Arbe and Grobet/ProCraft.

Heavy Duty Double Spindle Polisher with Motor DS204 Dust Collector $595.95 1/2HP Dust Collector ONLY $449.95

1/3HP motor. Unit measures 20 1/2W x19 3/4D x 12 1/2H. Comes with 5/8 tapered spindles, double work light, and on/off switch. With suction motor and filter. Replaceable fiberglass filter. CFM: 165. Weight 57 pounds. 110V/60Hz/ 1Ph

MD205 $495.95 Double Spindle Polisher/Dust Collector

PEPE DELUXE DUST COLLECTOR

47179 Filter -

Economy Polishing Motor

20 x 12 x 2.

$11.95 ea.

3450 RPM with 1/2 HP motor. Comes with one spindle. Unit measures 13 1/4W x 18D x 10H . With suction motor and filter. CFM: 165 Weight 47 pounds. 110V/60Hz/ 1Ph

SS206 $449.95 Single Spindle Polisher/ Dust Collector $11.95

47176 Filter -

Baldor Polishing Motor

9 3/4 x 12 3/4 x 2.

Heavy-duty construction 18 gauge steel, Supplied with 2 universal riser for low frame motors, dimensions: 11H x 32.5W x 22D, single switch operation. Easy filter and blower access.

P191100 - $649.00

470531 1/2 HP Motor 60 Hz Amps 8.6

3450 RPM - 115 Volts Spindles supplied 3 Prong Plug

$219.95

359T 1/2HP One Speed $ 399.95 340 1/4HP Two Speed $ 379.95 Sealed motors, single phase 1750/3450 Brass Baldor Spindles $29.95 each

Splash Hood
BHood $119.95

Made of heavy gauge steel, baked enamel surface. Inlet in bottom. With fuorescent lighting. 15lb. Measures 12 .75W x 16D x 17H.

Prices list in Canadian Funds/Call for Confirmation/Prices subject to change.

Steel Tapered Spindles For Polishing Motors. Fits straight motor shafts 1/4 Right or Left 5/8 Right or Left 3/8 Right or Left 1/2 Right or Left - $9.95 each

PR88

Skin protection, great for cleaning up after polishing with compounds. Applied to skin forms a dry elastic strong film protection. Hypoallergenic,silicon free. 100ml $ 11.95

PR88 Wash-off Hand protection.

Welding Respirator 3M-8515 10388 $42.95

Cool flow exhalation valve. M-Noseclip. Electret media. 3M welding web: fiber media is flame resistant. Not a substitute for a faceshield.

Particulate Respirator 3M-8511 10387 $31.95


10 filters in a box. Cool flow exhalation valve. M-Noseclip. Electret media. Filters 95% of particles fown to 0.3 microns.

Wheel Arbor - #47256 - $4.95 EACH Designed to hold grinding wheel on right side of motors with 1/2" straight shaft. For wheels with 1/2" hole. Steel.

www.lacywest.com

39

POLISHING LAPS & BRUSHES


1. 3. CHUNGKING BRUSHES WITH WOOD HUB
Code 16398 Rows one Size one 2-7/8" 3-1/8" 1B 1A Type $1.95 $1.95 Price

4.

5.

2.

1. Satin Finish Buffs Produces satin finish on gold, silver and other metals at a spindle speed of 3450 RPM. Synthetic fiber with reinforced leather center. Use dry for longer life. Sold individually. Fine Medium Coarse Dia. Ply 17891 $ 2.95 17892 $ 4.95 4 2 17893 $ 2.95 17894 $ 4.95 17895 $14.95 4 3 17896 $ 3.95 17897 $ 3.95 17898 $11.95 3 3 17899 $ 2.95

Mandrels for wheels. Priced per piece. 43134 stainless steel $1.95 43128 reinforced screw $1.95 Save 10% on 1 Dozen Packs. Strong stainless steel mandrels will not bend, Best Quality.

Screw Mandrel

7.

16391

16397

16403

16396

16399

16404

Miniature Satin Finish Buffs3/32 Mounted


Code 17901 17902 17908 17909 $1.95ea $1.95ea $10.95dz $11.95dz Diameter 3/4 3/4 1 1

four

two

two

two

one

2-1/4"

2-5/8"

2-7/8"

3-1/8"

2-5/8"

Super

2C

2B

2A

1C

$3.95

$1.95

$1.95

$1.95

$1.95

Black bristles are wedge shaped and securely mounted in hardwood hub with 1 7/8 dia. Tapered hole for screwing onto spindle of motor.

PRICE BREAKS

ON

QUANTITY

2. Matt Finish Wheels Nylon fibers impregnated with abrasive granules. Produces matte finish on metal, wood, and plastic . Unmounted leather centre.
Code 3 3 Dia. Medium Fine Grade $16.95 Diameter 1 1 1/2 2 2 1/2 3 4 $16.95 Price

Maximum 30,000 RPM recommended. Also available unmounted. Please specify style when ordering.
Used for finishing work, our aluminum oxide stones feature 3/32 shanks to fit all standard handpieces. Ruby points work best for quick fine finishing of semi-precious metals. 12-piece assortment comes packaged in a convenient wood stand.

Grade Fine Medium Fine Medium

17871

17870

RUBY STONE ABRASIVES

3. Knife Edge Felt Buffs with pin-hole centers.


Rock Hard 17491 $1.00 17493 $1.50 17495 $2.95 17497 $4.95 17499 $5.50 17500 $5.95 Hard 17490 17492 17494 17496 17498 $1.00 $1.50 $2.95 $4.95 $5.50

ABR61698 - set of 12 - $19.95

Hard

17466 $31.95 Medium $49.95 BF361

17456 $15.95

17451 $ 8.95

4. Paramount FELT BUFFS with pin-hole centers. 1/2" Thick


Medium 17452 17457 $14.95 $10.95 4 3 Dia.

Square edge stone wheel with 3/4 diameter. 110805 - $6.95 each

STONE WHEEL with ARBOR

5. Paramount FELT SPLIT LAPS 6 in Diameter


Hard $59.95 BF362 $64.95 Grobet BF363 Rock Hard

17467

$28.95

Designed for polishing small and difficult to reach areas. Use with mandrels. BUFFS - SOLD BY THE DOZEN.

7. Miniature Finex Muslin Buffs CODE SIZE PLY

17291

6. Diamond Hard Felt Lap


6 Diameter., 1/4 thick

$69.95

BF364

Flint Hard

Dixcel Chamois Buffs


17136 CODE 17135 2 SIZE 1 12 5 PLY

Used with rouge to produce a high finish on soft metals. 2 rows 1 rows ROWS $1.95 $1.95 PRICE

Square Edge.

$11.95

17141

17140

17139

17138

17615 7/8 16 1 rows $ 5.95 17616 1 16 1 rows $ 5.95 1761601 1 16 2 rows $ 5.95 17618 1-1/2 16 3 rows $ 5.95 17619 2 16 4 rows $ 6.95 Screw Mandrels - #43128 (3/32) $1.95 ea., #43162 (1/8) $1.95 ea. Cost Saver Buy mandrels by the dozen and get a quantity discount.

ROWS PRICE

Assortment Miniature Dixcel Chamois Buffs

17129 Box of 25, 3 ply wheels contains 16 wheels 5/8, and 9 wheels 3/4. $23.95

18

18

18

12

4 rows

3 rows

3 rows

3 rows

$36.95

$26.95

$17.95

$8.95

Cup Bristle Brushes Mounted 3/32 shank


Diameter 1/2 inch Soft 9/16 inch 16750 16753 Stiff 16751 16755 Price per Dozen. $10.95 $10.95

40

L acy West Su pplies Ltd. 604-669-5229

www.lacywest.com

Toll Free 1-800-667 - 4 11 8

P O L I S H I N G
brushes on polishing motors. Plastic hub with steel taper. For brushes with 1/8" hole. Handy way to use small

Tapered Chuck

Bristle Brush

R1157 - $10.95 (Right) L1157 - $10.95 (Left)


Code 16700 16701 16707 16708 16710 16711

FOR USE WITH UNMOUNTED BRISTLE BRUSHES ARE LOCATED ON PAGE


Type soft stiff soft stiff soft stiff

MINIATURE MANDRELS 4.

B R U S H E S
Code Style 835008 Cylinder flat end 835009 Cylinder flat end 835010 Cylinder flat end 835012 Cylinder flat end 835014 Cylinder flat end 837016 Cylinder 837018 Cylinder 840033 Cylinder 840040 Cylinder 840070 Cylinder 842R018 Cylinder Round edge 842R023 Cylinder Round edge 845008 Cylinder taper flat end 845016 Cylinder taper flat end 845018 Cylinder taper flat end 848L023 Cylinder taper long 848018 Cylinder taper 846009 Round end taper 849010 Round end taper 849012 Round end taper 849016 Round end taper 850014 Round end taper 850040 Round end taper 852010 X-mass tree 801009 Ball 801010 Ball 801012 Ball 801014 Ball 801016 Ball 801018 Ball 801021 Ball 801023 Ball 801029 Ball 801035 Ball 805040 Inverted Cone 805050 Inverted Cone 807A060 Inverted Cone long 818033 Wheel 818050 Wheel 825018 Knife edge 825025 Knife edge 825040 Knife edge 825050 Knife edge 826018 Knife edge with collar 856016 Round end taper 856023 Round end taper 856025 Round end taper 856040 Round end taper 858012 Needle 858016 Needle 859018 Needle 860010 Bullet 860012 Bullet 860014 Bullet 860016 Bullet 860060 Bullet 909033 Round wheel 909040 Round wheel

EDENTA HP DIAMOND BURS


Size 0.8mm 0.9mm 1.0mm 1.2mm 1.4mm 1.6mm 1.8mm 3.3mm 4.0mm 7.0mm 1.8mm 2.3mm 0.8mm 2.0mm 3.0mm 2.3mm 1.8mm 0.9mm 1.0mm 1.2mm 1.6mm 1.4mm 4.0mm 1.0mm 0.9mm 1.0mm 1.2mm 1.4mm 1.6mm 1.8mm 2.1mm 2.3mm 2.9mm 3.5mm 4.0mm 5.0mm 6.0mm 3.3mm 5.0mm 1.8mm 2.5mm 4.0mm 5.0mm 1.8mm 1.6mm 2.3mm 2.5mm 4.0mm 1.2mm 1.6mm 1.8mm 1.0mm 1.2mm 1.4mm 1.6mm 6.0mm 3.3mm 4.0mm

End Brushes on Mandrels3/32


Dia. 3/16 3/16 3/16 3/16 3/16 3/16 Length 1/4 1/4 3/8 3/8 1/2 1/2

Steel and Brass End Brushes on Mandrels3.32


Code 16926 16927 16940 16941 Dia. 3/16 3/16 3/16 3/16

Type brassstraight brasscrimped steellight crimp steelcrimped

Length 1/4 1/4 1/4 1/4

Price/Dz. $ 5.95 $ 5.95 $ 5.95 $ 5.95 $ 5.95 $ 5.95 Price/Dz. $ 6.95 $ 6.95 $11.95 $ 6.95

Miniature Bristle Brushes Unmounted Sold by the Dozen


Dia. 5/8 5/8 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1" 1" 1 1" 1 1 1" 1" 1 1" 1 1 1 1 Code 16647 16649 99938 16660 16661 16662 16663 16664 99903 16881 16887 99934 99936 99946 99947 99948 99941 99942 99943 99944 99929 99930 99931 99932 16889 16883 16671 16651 16672 16673 99902 99927 160916 160920 Style Arbor Hole soft 1/8 stiff 1/8 X-soft 3/32 soft 3/32 stiff 3/32 X-soft 1/8 soft 1/8 stiff 1/8 steel straight 1/8 brass crimped 3/32 steel crimped 3/32 brass crimped 1/8 steel crimped 1/8 soft 3/32 med. 3/32 stiff 3/32 X-soft 1/8 soft 1/8 med. 1/8 stiff 1/8 X-soft 3/32 soft 3/32 med. 3/32 stiff 3/32 steel crimped 3/32 brass straight 3/32 X-soft 1/8 soft 1/8 med. 1/8 stiff 1/8 steel straight 1/8 steel crimped 1/8 brass straight 1/8 brass crimped 1/8 Price $ 5.95 $ 5.95 $ 6.95 $ 6.95 $ 6.95 $ 6.95 $ 6.95 $ 6.95 $12.95 $10.95 $10.95 $10.95 $11.95 $ 8.95 $ 8.95 $ 8.95 $ 8.95 $ 8.95 $ 8.95 $ 8.95 $ 8.95 $ 9.95 $ 9.95 $ 9.95 $10.95 $10.95 $ 6.95 $ 6.95 $ 6.95 $ 6.95 $13.95 $13.95 $15.95 $11.95

Dia 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 1 1 1 1 1 1 1

Miniature Bristle Brushes Mounted Sold by the Dozen


Code 16608 16607 166071 16609 16805 16806 16840 16841 99924 99921 99922 99923 16619 16620 166201 16621 16848 16849 160690 Style X-soft soft med. stiff brass straight brass crimped steel light crimped steel crimped X-soft soft med. stiff X-soft soft med. stiff steel light crimp steel crimped brass crimped

Price $ 7.95 $ 7.95 $ 7.95 $ 7.95 $10.95 $10.95 $11.95 $11.95 $12.95 $12.95 $12.95 $12.95 $ 7.95 $ 7.95 $ 7.95 $ 7.95 $12.95 $12.95 $19.95

For use on tapered spindles of polishing motors use mandrels 47258, or 47259 $2.95EA For use on Flex shafts use 43160, or 43162 $11.95 - per dozen. Grobet USA

2 2 2 2

Metal Hub Bristle Brushes (German made) Dia Code Style QTY Price
1/4 1/4 1/4 1/4 16410 64001 16412 16400 soft soft stiff stiff Dozen Each Dozen Each $25.00 $2.95 $25.00 $2.50

Prices list in Canadian Funds/Call for Confirmation/Prices subject to change.

Looking for something you cant find please call us. We have sources worldwide. Best quality Brushes ~

Diamond Core Drills can be special ordered. Use water when using diamond points, can also be re-charged with Diamond Spray for longer use.

Price $ 2.95 $ 2.95 $ 2.95 $ 2.95 $ 2.95 $ 4.95 $ 4.95 $ 6.95 $12.95 $16.95 $ 7.95 $11.95 $ 2.95 $ 2.95 $ 3.95 $ 7.95 $ 6.95 $ 2.95 $ 2.95 $ 2.95 $ 2.95 $ 6.95 $12.95 $ 2.95 $ 2.95 $ 2.95 $ 2.95 $ 2.95 $ 2.95 $ 2.95 $ 3.95 $ 3.95 $ 6.95 $ 6.95 $ 7.95 $11.95 $16.95 $ 5.95 $11.95 $ 2.95 $ 3.95 $ 7.95 $ 9.95 $ 2.95 $ 4.95 $ 4.95 $11.95 $16.95 $ 4.95 $ 4.95 $ 5.95 $ 2.95 $ 3.95 $ 2.95 $ 3.95 $15.95 $ 6.95 $ 8.95

www.lacywest.com

41

P O L I S H I N G
Steel Scratch Brush In Holder 16340 - $8.95
Metal Brass Brass Steel Steel Steel

B R U S H E S
Glass Bristle Scratch Brush 16334 - $10.95

Cup-Shaped Wire Brushes on Mandrels 3/32 Single Section Sold by the Dozen Dia. Straight .0035 Light Crimped .003 Crimped .005 1/2 16960 - $12.95 9/16 16962 - $12.95 1/2 16965 - $12.95 9/16 16967 - $12.95 9/16 (1/8) 16968 - $12.95

FiberGlass Bur Cleaning/Scratch Brush 16332 - $5.95 16333 - Refill 2 pack- $2.95

Bench Duster 16051 - $7.95

Brass Scratch Brush with Plastic Handle 16311 - $10.95

Bent Plastic Handle Washout Brush 16099 - $2.95

Brass Scratch Brush with Wood Handle - four rows of .003" (0.8 mm) wire. Brush is 3 1/4" L x 3/4" H (114 x 19 mm). Overall length 8 1/4" (210 mm). BR13 - $9.95 Steel Scratch Brush with Wood Handle - four rows of lightly crimped .003" (.08 mm) wire. Brush is 4 1/2" L x 3/4" H (114 x 19 mm). Overall length 8 1/4" (210 mm). BR14 - $9.95

For surface finishing of yellow metal. Produces a softer, satin, or matte finish. Strands are .004".

Crimped Brass Wire Brushes ROWS 2 3 4 DIA 4" 4" 3"

Platers Brush Ideal for removing poishing compositions from large pieces and plated work. Four rows of extra stiff tampico bristles. 16069 - $4.95
For cleaning, deburring, and surface finishing on silver, aluminum, and other white metals. Produces pronounced surface effects. Strands are .003".

Lightly Crimped Steel Wire Brushes CODE 16459 16461 ROWS 3 4 DIA 3" 3"

Berry Buffs

CODE 16441 16444 16445

Safety Tape 3/4 x 90 Ft. Lightweight but strong. Will protect your skin from cuts and burns. Just wrap around fingers twice for full protection. 47532 Pack of 16 Green POL2500 One Roll Green $ 3.95 $35.95

Best buff for platinum. Stiff, chemically treated muslin with good cutting action and high compound retention. Durable and long lasting. 17566 4 12ply $3.95 17567 6 12ply $4.95 17530 6 30ply $5.95 17531 4 40ply $4.95 1753101 5 40ply $4.95 1753102 6 50ply $6.95

Treated Muslin durable thats ideal for use with aggressive compounds to remove, scratches from gold. Compound retention , robust polishing for a high luster on all hard metals. 17524 3 50ply $4.95 17526 4 50ply $5.95 17527 5 40ply $6.95 17529 6 50ply $9.95

PRICE $10.95 $11.95 $12.95

Orange Buffs

PRICE $ 8.95 $10.95

42

L A C Y WES T S UPP LIES LTD. 604-669-7447 Toll Free 1-800-6 6 7 -4 11 8

MSA Advantage Respirator Protection against a variety of respiratory hazards. Includes instructions and technical information. Order respirator and cartridges separately. 474000 Face Plate Only $26.95 474110 Pair Filter Cartridge (H) $18.95 474120 Chemical Cartridge (GMC) $26.95 474130 Chemical Filter (GMC) $48.95

www.lacywest.com

P O L I S H I N G B U F F S & F E LT B U F F S
Felt Inside Finger Buffs Felt Combination Buffs
Code 17316 17321 17324 17327 17315 17320 17323 17326 17329 Code 17340 17341 Diameter 5/169/16 9/163/4 5/87/8 11/161 5/169/16 9/163/4 5/87/8 11/161 3/41 1/16 Wheel 2x1/2 2x9/16 Length Type 3 Xhard 3 Xhard 4 Xhard 5 Xhard 3 Reg. 3 Reg. 4 Reg. 5 Reg. 6 Reg. Ring 3x9/163/4 4x5/87/8 Price $ 3.95 $ 3.95 $ 4.95 $ 5.95 $ 3.95 $ 3.95 $ 4.95 $ 5.95 $ 6.95 Price $ 7.95 $ 7.95

Combed Muslin Buffs

Code Dia. Ply Stitching Price 3 30 3 rows $ 3.95 17203 17205 4 30 3 rows $ 4.25 17206 5 30 3 rows $ 4.95 6 30 4 rows $ 5.95 17207 8 30 4 rows $ 9.95 17208 Soft cotton flannel, stitched with shellac-hardened centers.Use with rouge when polishing. Code Dia. Ply Stitching 17550 1 16 1 rows 3 30 3 rows 17551 17553 4 40 3 rows 17540 4 50 3 rows 17541 5 50 3 rows 17542 5 60 3 rows 17544 6 40 4 rows 17545 6 60 4 rows 17555 6 50 4 rows Shellac-hardened centers. Code Dia. Ply 17562 3 9 17560 4 12 17563 5 12 17561 6 12 With leather centers, for Yellow muslin buffs. Dia. 3 4 5 Ply 35 42 45

Cotton Flannel Buffs

Special Shape Muslin Buffs


Code 17610 17831 17833 17834 17852 17853 Suitable Shape Dia. cylinder 2 goblet 2 goblet 3 goblet 4 tapered 3/42 tapered 12 1/2 for polishing interiors. 50 ply 55 ply 60 ply

Code Dia. Ply Stitching Price 4 40 3 rows $ 3.95 17754 50 3 rows $ 3.95 17757* 4 17758 4 60 3 rows $ 3.95 50 3 rows $ 4.95 17759* 5 50 4 rows $ 4.95 17756* 6 17761 6 60 4 rows $ 6.95 With leather centers. * BULK DISCOUNT PRICES Lgth. 1-3/4 1-3/4 1-3/4 2 1 3/4 2 1/4 Price $17.95 $14.95 $16.95 $25.95 $19.95 $21.95

Yellow Muslin Buffs

Bulk Pricing Available on Buffs 12 or more Buffs .

Price $9.95dz $ 2.50 $ 3.95 $ 3.95 $ 7.95 $11.95 $ 5.95 $ 9.95 $11.95

17704 4 17705 5 17706 6

Super Buff 100% Cotton Lasts 50% longer.


4 rows 4 rows 4 rows $ 4.95 $ 5.95 $ 6.95

Combed Finex Muslin Buffs

Chemkote Muslin Knife Edge

Stitching Price 2 rows $ 2.95 5 rows $ 3.95 7 rows $ 4.95 8 rows $ 5.95 working into crevices.

Mounted Felt Bobs

Code Dia. Ply Price 17622 3" 35 $ 1.95 17630 4" 60 $ 3.95 17625 5" 55 $ 4.95 17626 6" 60 $ 5.95 17627 6" 70 $ 6.95 17628 8" 70 $ 9.95 With shellac centers and combed edges for use with rouge.

Muslin Wheel Buffs White


Code 17577 17581 17584 Stitching 3 rows 3 rows 3 rows

With shellac centers, use with abrasives. Code Dia. Ply Stitching 17643 3 9 3 rows 17644 4 12 5 rows 17645 5 12 7 rows 17646 6 12 9 rows With leather centers, use with rouge.

Price $ 1.95 $ 2.95 $ 3.95

17227

Muslin Buffs with Knife Edge

Price $ 2.95 $ 3.95 $ 4.95 $ 5.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change

Code Dia. Ply Stitching 17771 3 35 none 17781 4 60 none 17783 5 54 none 17784 6 54 none 17777 8 55 none Leather center, loose, unstitched. Use rouge for high polish.

Combed Muslin Buffs LooseWhite


Price $ 2.95 $ 3.95 $ 4.95 $ 5.95 $ 8.95 with

Pointed Cone 17276 1/2" x 1" $ 1.95 each 17277 3/4" x 1 1/2" $ 2.95 each 17278 1x 2 $ 3.95 each Rounded Cylinder 17280 1/2" x 1" $ 1.95 each 17281 3/4" x 1 1/2" $ 2.95 each 17282 1x 2 $ 3.95 each Knife-Edged Wheel HARD 17478 1/2" $10.95 (24pc) 17483 5/8" $10.95 (dz) Straight-Edged Wheel (Package of 24pcs.) 17351 17359 17365 17371 HARD HARD HARD HARD 1/8x1/2 1/8x5/8 1/8x3/4 1/8X 1 $ $ $ $ 3.95 4.95 4.95 5.95 SOFT SOFT SOFT SOFT

Unmounted Felt Bobs

Please specify style number when ordering. $1.95 each

17245

17250

17255

17257

17355 17363 17367 17376

$ $ $ $

3.95 4.95 4.95 5.95

www.lacywest.com

43

DIALUX POLISHING COMPOUNDS 1/4 lb.


COLOUR BLUE WHITE YELLOW RED GREEN CODE 7WS W1 47326 YRB -

POLISHING COMPOUNDS & ACCESSORIES


DESCRIPTION Fine polishing of all metals High luster of White Gold Soft metals, Copper, Bronze, etc. High polishing of Gold and Silver Platinum and other Hard Metals SIZE 1 LB 1 LB 1/4 LB 1 LB

Made in France

FIRST QUALITY ROUGES STICKS


COLOR RED GREEN WHITE YELLOW

PRICE $8.95 $7.95 $8.95 $8.95 $8.95

DESCRIPTION Burns Rouge High luster on Gold and Silver High luster on White Gold, Platinum, Silver Polish on Hard Metals, Steel, Chrome Gold, Platinum, Chrome, Hard Metals

PRICE $ 7.95 $13.95 $ 5.95 $ 7.95

Carrot Rouge Made in Germany A crocus- polishing compound that is an excellent alternative to rouge. This compound has been tested extensively and found to leave a superior finish on platinum. Can also be used on hard plastics and epoxy. MZC48G 1/2 lb Bar $29.95

PLATINUM POLISHING COMPOUNDS

Grobet USA Rouge for Platinum 4742001 Blue Platinum removes light scratches 5oz.- $14.95 47420 Pumpkin for final polish 5 oz. - $14.95 47484 Platinum Tripoli 2 lb. - $ 7.95

CODE 47431 47502 B26 47454 V376

TRIPOLI COMPOUNDS

MZGRE MZRED MZBRO 47326 MP175 MZBLU

CODE

ROUGE AND TRIPOLI Neroli 250g GERMAN MADE, MENZERNA


GREEN RED TRIPOLI WHITE YELLOW BLUE TYPE

TYPE BOBBING-TAN CROCUS BROWN TRIPOLI WHITE DIAMOND GREY STAR

DESCRIPTION For brush or Lap work Fast cutting on steel Standard, fast cutting Finer abrasive,some finish Removing scratches

SIZE. 1 LB. 1/4 LB Tube 1 LB. 1 LB. 1 LB.

PRICE $ 4.95 $ 7.95 $ 6.95 $ 4.95 $ 6.95

High luster on all precious metals.Produces a mirror finish, also removes scratches while polishing. A greaseless and dry polish but not dusty, which means a quick clean up. 47312 1/4 LB Tube $4.95 47313 1 LB Tube $7.95

FABULUSTRE Polishes all metals

$ 8.95 $ 7.95 $ 5.95 $ 4.95 $11.95 $ 7.95

PRICE

47324 - RED $5.95 47321 - GREEN - $4.95 47325 - TRIPOLI - $2.95

PROCRAFT - Peel Away Tubes

Powdered composition intended to be used with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart high luster. Gives high luster to steel, PLATINUM, precious stones, pearls, ivory, horn, shell, and porcelain. 47524 - 1 oz. of Ruby Powder. $ 6.95 47525 - 1/2 lb. of Ruby Powder. $39.95 47516/1 - 1 oz. of Tin Oxide $ 5.95 47516 - 1 lb. of Tin Oxide $29.95

RUBY POWDER & TIN OXIDE

ZAM BUFFING COMPOUND Formulated especially for silver and turquoise jewelry. Will not scratch soft stones such as turquoise.Time-saving to use, since stones do not have to be removed before buffing a new piece. Leaves a highluster without residue. Fast clean-up, does not cling to or penetrate surface of stones. 47503 - 1lb - $10.95 47502 - 1/4lb - $4.95

MENZERNA RUBISOL 100Gram Bar


MZR100 - $24.95 Made in Germany - Very High Polish, Extremely fine grit -

Unique item makes polishing bracelets and chains fast, easy and safe. Made of hardwood. 48075

Polish It - Polisher Holder for chains/bracelets

Like a vice but holds single ring secure while polishing. Adjustable saves against burning fingers, quality tool.

RING GRIPPER

APRON Heavy work denim apron with two pockets. 47306 Leather Apron 36 113670

Light weight shield protects the face during polishing or grinding. Cushioned head band and visor, is replaceable. 29376 Face Shield Complete $20.95 $ 9.95 $39.95

FACE SHIELD

RUBBER FINGER PADS - FOUR SIZES


23226 CODE SIZE 23225 med. $6.95 23228 small $6.95 23227 CODE x.large $7.95 large SIZE $7.95

First Cut - 800 for initial smoothing of roughness PC080 1 Pound $22.95 Medium Cut -1500 For removal of light scratch marks PC081 1 Pound $24.95 Fine Cut - 4000 Use prior to final finishing. PC082 1/2 Pound $23.95 Extra shine Rouge - 6000 Gives bright finish. PC083 1/2 Pound $26.95 Super Shine Rouge - 8000 leaves mirror bright finish PC084 1/2 Pound $29.95 Picca Blue removes fine scratches PC085 4 oz. $21.95

PLATINUM ROUGE FROM JAPAN

48070

$44.95

Packaged one dozen. Finger Protection.

44

FOR

L A C Y WE ST SUP P LIES LTD. 604-669-5229

BULK PURCHASES OF POLISHING COMPOUNDS AND EMERY PAPER, PLEASE INQUIRE FOR PRICES.

$9.95

Finger and thumb guards with elastic backs, protects during many bench and polishing operations. Four Different Types of Guards : 10 Guards in Pkg. CODE DESCRIPTION PRICE 47526 Finger open end $10.95 47527 Thumb open end $10.95 47528 Finger closed end $14.95 47529 Thumb closed end $12.95

LEATHER FINGER GUARDS

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

A B C

Self- restoring internal short circuit protection 99% filtration - Terminal voltage output fluctuation is less than 1% - Internal cooling system Impulse Power Modern circuitry solution Precision digital current and voltage regulators - Digital readout - Solid State - Dual Voltage Efficiency not less than 85% - Small footprint.

PLATING EQUIPMENT AND SUPPLIES


PEPE RECTIFIERS A B C A-

AB-

Precision-built in the USA, continuous-duty, solid-state electronic units with a range of power to handle all plating needs. Works by means of the powerstat control, to produce desired voltage. All units have pilot lights and both DC ampmeter and voltmeter for measuring current under load. All units come with a set of lead wires with alligator clamps and terminal lugs. The 25 amp unit can be used for electro-stripping.

PRO-CRAFT RECTIFIERS

PEPE DIGITAL PEN PLATING SYSTEM


Stable voltage, Precise voltage regulator, Automatic current limitation - 500mA Max, Dual voltage 115V-60HZ; 220V-50HZ

C-

#P27025 - 25A/12V rectifier - $359.95

#P27010 - 10A/12V rectifier - $349.95

BC-

#P27060 - 60A/15V rectifier - $669.95

System Includes: 3 plating pens, 3 plating jars with lids, 9 felt tips, 1 wire holder and 1 alligator clip. #P27200 - $269.95 #P272958 - Fine felt tips 10 pack - $9.95 REPLACEMENT PENS AVAILABLE -

ALLIGATOR CLIP/LEADS - #45666 - 10, 25, and 60 - $4.95 (Pair) THE GENIE DISPOSABLE PEN PLATER

#45502 - 3 amp $289.95 $339.95 #45500 - 3 amp with Accessories kit #45506G - 10 amp - runs baths up to 1 gallon except for $449.95 rhodium which is a 2 quart maximum. #45510G - 25 amp - runs baths up to 5 gallon except for rhodium which is a 1 gallon maximum. $459.95 #45508 - 25 amp with Accessories kit $509.95 - 60 AMP ALSO AVALIABLE -

Plating Solutions
2 Gram Pints of Rhodium now available !

#45644 #45645 #45640 #45641

BEAKERS & COVERS


600ml Beaker Cover 1000ml Beaker Cover 600ml Glass Beaker 1000ml Glass Beaker -

These pens can be used anywhere no need for a rectifier, the power source is a battery. Each pen will plate for up till one hour of continuous plating. Self contained, self adjusting and compact.Great for touch #GENIE - $29.95 up jobs!

- STAINLESS STEAL BEAKERS ALSO AVAILABLE -

$6.95 $7.95 $14.95 $19.95

ANODES (available in Mesh, T-Bar and Bar form)


- Please Call for Market Price #45602 - Silver anode #45604 - Stainless Steel anode #45598 - Nickel anode #45597 - 24K Gold anode #45592 - Copper anode #45601 - Platinized Titanium anode

Cohler plating solutions are specially formulated and prepared using only quality materials and the highest standard of quality control. The results, a brilliant finish that is shiny and uniform. One of the finest features of their plating solutions is that they plate consistantly from start to finish. CYANIDE BASED SOLUTIONS ARE ONLY SOLD TO PROFESSIONAL TRADESPEOPLE. PRICES ARE WE
DUE TO FLUCTUATIONS IN THE PRECIOUS METAL MARKET. CAN SHIP SUBJECT TO CHANGE

MIRROR NICKEL plating solution NICKEL, Cyanide free plating solution 14K SUPERHARD plating solution 18K SUPERHARD plating solution 24K SUPERHARD plating solution COPPER plating solution SILVER plating solution RHODIUM concentrate 1/2 gram RHODIUM bath 1 gram ELECTROCLEAN solution Cohler gold plating solution are Cobalt based. Giving you a hard and longer lasting plating, great for watch cases.

COHLER PLATING SOLUTIONS:

KROHN PLATING SOLUTIONS:

ELECTROCLEAN solution - ready-to-use, heavy duty, primarily used to clean casting and articles prior to plating. COPPER plating solution TIVA CLEAN - A biodegradable cleaning concentrate for metals and Plastic. TIVA BRITE - An electro stripping powder used for polishing of yellow gold.
VIGOR RHODIUM Plating Solution - 1 gram bath -

Plating Solutions

FROM THE AIR PRODUCING OXYGEN OF

OXYGEN GENERATOR; A DEVICE THAT REMOVES NITROGEN 95% QUALITY. IDEAL FOR SMALL WORK SHOPS.

RHODIUM. ASK FOR A MAILER RHODIUM AND SAVE ON HAZMAT CHARGES. CYANIDE FREE SOLUTIONS
ARE ALSO AVAILABLE

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

RHODIUM 1/2 gram Pen Pal RHODIUM 1/4 gram Pen Pal RHODIUM 1 gram Pen Pal SILVER concentrate solution 14K Pen Pal 18K Pen Pal 18K GREEN GOLD Pen Pal 24K Pen Pal ROSE GOLD Pen Pal

COHLER PEN PALS:

SPECIFICATIONS: Product Flow:10-12SCFH, Standard Product Pressure: 1-9 psig, Product Purity: 93% Nominal, Product Dew Point: 100F (-73C), Ambient Operating Conditions: Locate the oxygen generator in a well-ventilated area that is protected from weather elements & remains between 40F (4C) & 112F (44C), Power Requirements: 120V ~ +- 10%, 50/60Hz, Single Phase, 4.0A. 220V ~ +- 10%, 50/60Hz, Single Phase, 2.0A. Typical Power Consumption (at 93% purity): 350W. Compressed Air Inlet: 1/4NPT, Product Gas Outlet: 1/4 NPT/B size oxygen adapter. 1 year Warranty. $1495.00 (120V)

ONYX PSA OXYGEN GENERATOR

~AVAILABLE

IN ALL SIZES~

www.lacywest.com

45

TIONS YET PLATE UNIFORMLY AND PRODUCE A HARD, DURABLE FINISH.

GOLD PLATING - PRODUCES A UNIFORM GOLD COLOR. USE WITH A STAINLESS STEEL OR PURE GOLD ANODE. #45212 - 14K - 1 Quart #45214 - 18K - 1 Quart #45216 - 24K - 1 Quart #45213 - 14K - 1 Gallon #45215 - 15K - 1 Gallon #45217 - 24K - 1 Gallon SILVER PLATING - PRODUCES A UNIFORM SILVER PLATE. USE WITH A STAINLESS STEEL OR PURE SILVER ANODE. #45220 - 1 Quart #45221 - 1 Gallon NICKEL FREE - A NICKEL FREE ALLOY SIMILAR IN COLOR TO NICKEL. BEST IF USED OVER COPPER MIRROR. #45222 - 1 Quart #45223 - 1 Gallon NICKEL MIRROR - ADDS A DECORATIVE BRILLIANCE AND A WHITE MIRROR SHINE TO DULL FINISHES. BEST IF USED OVER COPPER MIRROR. #45210 - 1 Quart #45211 - 1 Gallon COPPER PRIMER - USED AS A PRE-PLATE TO COVER DIFFICULT TO PLATE METALS SUCH AS TIN, LEAD, AND ZINC DIECAST METALS. AN EXCELLENT BASE FOR NICKEL PLATING. USE WITH A PURE COPPER ANODE. #45206 - 1 Quart #45207 - 1 Gallon COPPER MIRROR - PRODUCES A BRIGHT COPPER FINISH. AIR BUBBLE AGITATION PRODUCES SUPERIOR UNIFORMITY AND SHINE. USE WITH A PURE COPPER ANODE. #45208 - 1 Quart #45209 - 1 Gallon WHITE FREE - DEPOSITS A BEAUTIFUL BRIGHT, WHITE FINISH. BEST IF USED OVER NICKEL MIRROR OR COPPER MIRROR. USE A STAINLESS STEEL ANODE. #45224 - 1 Quart #45225 - 1 Gallon BLACK FREE - USE TO ACHIEVE AN ANTIQUE FINISH. AFTER ARTICLE IS PLATED WITH BLACK FREE, HIGHLIGHTS ARE RELIEVED BY POLISHING. USE WITH A STAINLESS STEEL ANODE. #45226 - 1 Quart #45227 - 1 Gallon TIN - ADDS A CONDUCTIVE COAT FOR HIGH QUALITY ELECTROFORMING. FOR BETTER RESULTS WHEN USING METALFORM PAINT OR ANY OTHER COPPER BASED CONDUCTIVE COATING, DIP PARTS IN SOLUTION FOR 60 SECONDS. NOT USED WITH RECTIFIER. #45228 - 1 Quart #45229 - 1 Gallon ACID ACTIVATOR SS - ACTIVATOR - SS IS A POWERFUL ACTIVATOR THAT PROVIDES EXCELLENT OXIDE REMOVAL AND ETCHING PROPERTIES TO HELP METALS PLATE ONTO STAINLESS STEEL.. #45244 - 1 Quart #45245 - 1 Gallon ELECTROCLEANER - A QUICK AND EFFECTIVE METHOD OF CLEANING OBJECTS PRIOR TO PLATING. #45202 - 2 lb. #45203 - 5 lb. ACTIVATOR - THIS POWDERED ACID IS MIXED WITH WATER TO PRODUCE A MILD SOLUTION FOR ETCHING, BRIGHTENING AND CLEANING. USE TO CLEAN AND ACTIVATE PARTS TO ASSURE STRONG METALLIC BONDING THROUGHOUT THE SUBSEQUENT PLATING PROCESS. #45204 - 2 lb. #45205 - 5 lb. ULTRASONIC CLEANER - Degreases and cleans. It is biodegradable, non-ammoniated and phosphate free. #45233 - 1 Quart #45234 - 1 Gallon STRIP-FREE - USED TO STRIP GOLD PLATING. USE WITH A STAINLESS STEEL ANODE. #45218 - 1 Quart #45234 - 1 Gallon

CLEAN EARTH - ALL PLATING SOLUTIONS ARE CYANIDE FREE. THEY ARE ECOLOGICALLY SAFER THAN STANDARD PLATING SOLUTHE SOLUTIONS ARE EASY TO USE AND PRODUCE RICH COLORS.

CLEAN EARTH PLATING SOLUTIONS

46

LA C Y WEST SUP PL IES LTD. 604-669-5229 Toll Free 1-800-667 - 4 11 8

-CALL FOR CURRENT MARKET PRICE-WHEN ORDERING SOLUTIONS PLEASE SPECIFY CYANIDE-FREE-

www.lacywest.com

Quality precision anodized aluminum torch handle. Lightweight 4oz. finger tip control of valves and wide selection of tips from large blush to pinpoint. This is a HIT tip for all gases (except acetylene)with compressed air. Adjust from large full flame to a very pointed flame. Low temperature 3400-3500F (1875-1925C). Especially suitable for high melting temp. precious metals and chromiumcobalt alloys. For all gases with oxygen (except acetylene). Bushy flame from 4900-5160F (2700-2850C).

Manufactured in Switzerland, the Swiss Torch is the most popular jewellers torch. It is favored for its balance, precision and versatility. The Swiss Torch is really four torches in one. First, it is a repair torch with a Hoke style head. Second, it is a microhead torch, a precision torch with 3 different hypodermic tips for precise soldering and welding. Third, it is a platinum torch with a special tip that produces a hotter flame for melting and casting a small amount of platinum. Finally, it is a casting torch, with your choice of oxy/gas or compressed air/gas torch heads. The Swiss Torch uses any gas, except acetylene, and can be purchased complete or as separate components. TO207 SWISS TORCH BODY $129.95 ($100 when purchased with tip)

SWISS TORCH SYSTEM

SOLDERING SUPPLIES
Pointed flame, high heat for soldering/ brazing work # TO248

TO248

014249

TO2472

TO2475

TO2461

TO246-1 BRAZING HEATING & MELTING TIP - $ 139.95 TO247-2 HEATING & MELTING TIP - $ 139.95 TO247-5 HEATING & MELTING TIP - $ 139.95

Jewellery/Electronic/Optician/Hobby Tip # TO242 An all purpose pointed flame. Tip # TO249 Microflame, fine flame for brazing optical repairs. Swiss Torch gives you precision soldering.

Especially for use with small alloy casting. All gases with oxygen (except acetylene) Coronal flame from 4900-5160F (2700-2850C)

TORCH-MATE Will automatically light your torch, simple and easy to use. Battery operated. 14204 $29.95 -WHILE SUPPLIES LAST-

Uses one master handle for complete soldering and microflame welding.

TO207

Torch Holder 14058 $39.95


Magnetic holder for Little Torch, weighted base so will not tip over, holds tips.

TO248 BLAZING TIP - $ 139.95 From small pointed flame work 4900TO249 MICROFLAME WELDING & BRAZING TIP - $ 169.95 HW23012 - 12FT/HOSES twin hoses propane/oxygen $29.95 HW23020 - 20FT/HOSES twin hoses propane/oxygen $39.95
42351 42571 54128 54130 54219 99847 99846 99845 54186

5160F (2700-2850C) All gases with oxygen (except acetylene).Excellent flame stability even with natural gases. Supplied with 3 exchangeable nozzles in different sizes. Extremely maneuverable, unlimited flame positions. Adjustable pointed flame from 4900-5160F (2700-2850C) for all gases with oxygen (except acetylene). Includes 4 nickel plated micro needle tips for various flame strengths.

ASNI Z 87.1 CSA Z 94.3

Welding Glasses
Shade 7

GLS

Shade 10 * Platinium

SOLDERING SURFACES B. Magnesia Block

A. HoneyComb Ceramic Blocks C. Carbon Ring Stand


4" x 5" x 1/2" 5-1/2" x 7-3/4" x 1/2" 6" x 1-1/2" x 3" Rod length 6" replacement Carbon Rod 7-1/2" x 7-1/4" x 7/8" 6" x 6" x 1/2" 6" x 12" x 1/2" 12" x 12" x 1/2"

Check out the GRS Soldering Systems !


$12.95 $19.95 $ 6.95

110-415

$15.95

Safety Goggles & Glasses 29367 29011

Welding Goggles 29368

$29.95

$12.95 $9.95

50mm Green filter lens. Adjustable perforated vent holes. Shade is 3.0.

$21.95

Titanium Solder Pic Tripod with Screen

54131 Ceramic Ring Stand Rod length 6" 54132 replacement Ceramic Rod

D. Cordorite Board Non Asbestos E. Asbestos-Free Pads - SOFT F. Charcoal Block

Ceramic Ring Stand

541511 3-1/2" x 2-1/4" x 1-1/2" 54162 4-3/4" x 3" x 1-1/2" 541711 7" x 4" x 1-1/2" 42422 Compressed 5" x 3" EUROPEAN 42443 Compressed 3 x 2 EUROPEAN 42306 42308 42315 6" x 6" x 1/2" 6" x 12" x 1/2" 4 1/2 round 4 x 4 x 1/2 6 x 6 x 1/2

Silquar Soldering Boards - Asbestos-Free Hi-Temp Platinum Soldering Board

$9.95 $16.95 $21.95 $14.95 $13.95

$13.95 $16.95 $29.95

$33.95

$32.95 $ 9.95

$27.95 $ 8.95

Tungsten Solder Pic


Can be placed over bunsen burner/alcohol lamp. Work can be heated from below, while soldering or enameling. 14315(9legs) $12.95 14312(6.5legs) $10.95 14330(6 x 6) $ 7.95

Soldering Pan

54772

P30000

$7.95

$5.95

w/pumice stones. Rotating pan 7 diameter.

54120 $59.95 54122 1kg pumice $14.95

42313 Silica 42314

$17.95 $19.95 $12.95 $34.95 $39.95

Apply with brush. Shows solder joints as darker lines. Easy to polish away after. Solder joint detector. 1/5 oz. Bottle.

Solder Prints

54448 $15.95 Protective paste prevents oxidation.Washes off with water. 1 lb. jar.

Heat Shield

504032

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

$29.95

Kool Jool

54468 $10.95 Protects jewels from heat (except opals) while you solder. 8oz.

www.lacywest.com

47

S O L D E R I N G
These regulators are for medium to heavy duty service. *Single Stage Regulators are used when decreasing cylinder pressure does not significantly affect operations. Single stage regulators have greater flow capacity than two stage models. Regulators UL Listed UNIWELD $108.95 CGA Inlet 540 510 Outlet BRH BLH 2Gauge 200/400 60/400 Pressure 5-125 2-40

SINGLE STAGE REGULATORS

Code RUH8210 RUH8212

Gas oxygen Propane

Economical, compact single stage design provides efficient and dependable control of gases. These regulators are engineered to maximize performance for torches requiring lower gas flows and outlet pressures. eg. The Little Torch $139.95 each G540 - Oxygen E510 - Propane Solid brass industrial construction. - Durable teflon high pressure seat. Fully adjustable outlet pressure. - Polished brass 2 diameter gauges. Extra sensitive diaphragm.

SMITH SINGLE STAGE REGULATORS

Stage Single Single

LITTLE TORCH This miniature welding torch maneuvers easily in areas impossible to reach with conventional torches. Produces a perfectly controlled, stable flame hot enough to melt metals, glass and ceramics with thread thin flames up to 6300F. Colour-coded oxygen, and fuel gas lines and valves help prevent errors. Uses acetylene, propane and propylene based fuels. Welds an unlimited range of materials, brazes and solders the tiniest elements with ease. Little Torch Fuel Temperatures Acetylene 5900 F 6300 F Butane 4995 F MAPP 5300 F Hydrogen 4850 F Natural Gas 4600 F Propane 4780 F GEN TEC SMALL TORCH GENPRTRCH - Econo Five Tip Kit $149.95
Kit includes torch, hoses and sizes 3-7 curved tips. For Propane. (Made in China) Code 14012 14013 Code Size Code Size 14014 4 1401602 7 14015 5 14026 6 TWIN TIP 14016 6 * Tip sizes 1 and 2 are for use with oxygen and acetylene or oxygen and hydrogen only.

S U P P L I E S

ST105 - FIVE TIP KIT $165.95 Kit includes torch, hoses and sizes 3-7 curved tips. FOR PROPANE OR NATURAL GAS (TANKS NOT INCLUDED)

EXTRA TIPS (CURVED)


Size 2* 3*

$18.95 each

The Hoke Torch

An inexpensive torch that does not require an oxygen tank as it draws the oxygen from the air. Produces a variety of flame depending on the tip used, from pinpoint to melting size. A complete torch kit comes with 3 tips, hoses and valve for hook-up to disposable tank. - SO181 - $29.95 (Valve only)
Ideal for precision metal melting, soldering, brazing, and welding. Overall length 9. Inlets use standard 1/4 hose.

THE WHALE TORCH - SO150 - $109.95

ADAPTOR KIT for Hoke with 6 Tips Adaptor and six tips. The adapter tips are not recommended for use with acetylene. Expand your Hoke torchs capabilities with this precision adapter set. Equips you for all soldering, welding and melting jobs. Especially suited for fine, intricate soldering jobs.

14120 14122 14123 14060

Hoke Torch Hoke Torch Hoke Torch

Acetylene - Handle and 4 Tips. Propane - Handle and 4 Tips.

Natural Gas - Handle and 3 Tips.

$ $ $ $

39.95 39.95 39.95 14.95

HW23012 12 feet $29.95 HW23020 12 feet $39.95 HST1812 - twin hoses for little torch - $49.95 (ECONO) ST267 - 8FT Green hose for little torch - $49.95 (SMITH BRAND) ST266 - 8FT Red hose for little torch - $49.95 (SMITH BRAND) Use with Little Torch . 14030 - $39.95 oxygen or acetylene 14031 - $47.95 propane or natural gas

HOSES

Complete with fittings.

MELTING TIP

LIGHT DUTY #141T

GENTEC

MEDIUM DUTY #142T

HEAVY DUTY #143T

Compact, lightweight, two-tube construction with front ballpoint valves for one hand, fingertip control and positive shutoff. A fittings. 141T Light Duty Handle $ 89.95 171H4 Heat Nozzle $ 79.95 171H6 Large Tip size 6 $ 79.95 Sturdy, reliable handle with internal O-ring seals for added safety and ease of service. Stainless steel ballpoint valves for accurate gas control and positive shutoff. B fittings. 142T Med. Duty Handle $ 99.95

Torch Handle

Small size and lightweight . Ideal for jewellery welding, brazing and other small jobs. Can be used with oxygen and acetylene or propane. Control valves are conveniently positioned and hold flame adjustment precisely. Includes tips (1/0, 1, and 2), and slip-hose connectors for 3/16 hose. Overall length 6-3/4. Replacement Tips 14161 1/0 (Small) 14162 1 (Medium) 14163 2 (Large)

MECO MIDGET TORCH WITH 3 TIPS.


Midget Torch

240111 - Oxy with valves $39.95 240112 - Gas with valves $39.95

CONNECTORS With Valves

14160

48

L A CY WEST SUP PLIES LTD. 604-669-5229 Toll Free 1-800-6 6 7 - 4 11 8

FA7RO Oxygen FA7RF Fuel

Flashback Arrestor

172H6 Medium Tip 172H8 Large Tip 143T Heavy Duty Handle 173H15 Casting Tip

$ 49.95 $ 89.95 $109.95 $ 99.95

Electronic ignition system for push-button start. Both flame and temperature can be adjusted precisely. Comes with a removable stand. Provides up to two hours of burn time before refill is required. High temperature flame of 2500 F. Uses butane only. Portable and lightweight, yet sturdily constructed. Excellent for small repair jobs.

MICRO TORCH HANDHELD 14212 - Micro Torch SOL31000 - Butane Torch

$17.95 $17.95 $17.95

$279.95

Protector for your torch outfit.

$ 29.95 $ 29.95

TORCH-MATE Automatic Torch Ligher Depress activator bar and spark instantly lights torch. Uses 2 AA batteries (not included). 14204 - $29.95

$ 65.95 $ 49.95

www.lacywest.com

PUK 3 BASIC is the device for starters with functionality reduced to the minimum. Its speciality is fixing welds before the soldering process. More effective working is possible, because time-consuming clasping and binding work becomes redundant. Using the output regulator, the welding strength, size and intensity is set. The welding procedure is automatic. 1. Safety gas encases the welding spot. 2. A signal announces the arc. 3. The light arc appears. 4. Safety gas supply ceases. The welding procedure may be stopped anytime by removing the electrode from the workpiece. The heat created by the arc is very low, so workpieces can be easily hand held. Temperatures are similar to heat created during laser welding. Devices are manufactured according to VDE guidelines and the standard requirements needed for CE certification. PUK 3 basic is the ideal equipment for jewellery production and/or serial production and can increase the productivity in the larger jewellery manufacturing environment. Made in Germany. Using the PUK - fine welding devices opens many possibilities of fine welding applications. Welding on fittings, adding material, welding a loop, joining items prior to soldering, fixing porosity, and preparation of seams are just a few of the many examples of work which is now possible. Metal can be added easily especially where material is missing, for example on fracture lines or where the profile of the workpiece needs to be built up. All precious metals and precious metal alloys, high-grade steel and titanium, as well as many tin alloys (costume jewellery) are suitable for welding. Principally, it applies that all metals which are suitable for arc welding can be welded with the PUK. The operating speed has doubled by using more efficient main power transformers and by adapting the speed of the gas flow.
PUK 3 Professional offers, in addition to the proven functions of the basic units, more achievement and a number of additional possibilities. Impulse Mode: Softspot (standard-mode), Micro (micro-mode), Gap (joint-mode), the Gapspot (joint mode). The finer adjustment possibilities of pulse time and power make an exact tuning of spot weld, size and penetration depth possible. PUK 3 Professional Plus - The Plus device adds even more applications, finer ranges of adjustment and 5 memory programs, which the operator can use to save selected settings. It is also 30% more powerful than the Professional.

P U K

S P O T

W E L D E R

Puk Mezzo Microscope

LEASING AVAILABLE - ONCE

THREE BASIC ALTERNATIVES WHEN PAYING FOR THE ACQUISITION.

PAY CASH, BORROW MONEY IN THE FORM OF A LOAN OR LINE OF CREDIT, OR LEASE. CHANCES ARE LEASING IS YOUR BEST BET: - OVERCOMES BUDGET RESTRICTIONS - CONSERVES WORKING CAPITAL - PRESERVES CREDIT LINES - OFFERS POTENTIAL TAX BENEFITS - FLEXIBLE PAYMENT OPTIONS - COMPETITIVE RATES CALL LACY WEST SUPPLIES FOR A REFERRAL OR CONTACT A LEASING COMPANY OF YOUR CHOICE. Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

THE MEZZO STEREOMICROSCOPE The new mezzo stereomicroscope opens up a whole new dimension for PUK fine welding device users. Even for users without much experience, the mezzo allows precise and sensitive welding with an entirely new level of precision. Its now possible to guide the workpiece with both hands. This guarantees outstanding welding results with considerably longer electrode lifespan. The high quality mezzo is fully compatible with all PUK fine welding devices and features a large viewing field and sharp, contrast-rich images with a 10x zoom. The electronically controlled eye protection filter, made of real glass, is the basis for a distortion-free view of the welding area. This guarantees secure vision field darkening during welding according to DIN EN 379 standards.

THE DECISION TO UPGRADE OR ADD EQUIPMENT HAS BEEN MADE, THERE ARE

www.lacywest.com

49

PULSEPOINT LASER WELDING MACHINES THESE LASER WELDERS CAN FUSE STAINLESS STEEL, SILVER, STERLING SILVER, GOLD, PLATINUM, TITANIUM AND PLASTICS. NO MORE NEED FOR SOLDER. NO MORE PICKLING OF METALS. NO MORE FIRESCALE. SAFER THAN CONVENTIONAL SOLDERING. OPTIONAL ARGON GAS HOOK-UP.
THREE MODELS TO CHOOSE FROM : PULSEPOINT 200 Heavy Duty 100 joules (75 Watts Max.) PULSEPOINT STUDIO 60 60 joules ( 40 Watts maximum) PULSEPOINT STUDIO 30 32 joules ( 30 Watts maximum)

LASER WELDER

Neutec PulsePoint line of laser welding machines........... - High-efficiency optics enable higher-duty cycle output (average power) with fewer joules. - Dual-pedal foot control allows hand-free firing of the laser pulse as well as hands-free activation of cooling air and inert gas. - Energy is transferred from the power source to the target with the least loss. - Super-high refractive index built into these optics delivers more energy to the target piece. - Built with Neutec higher-efficiency components, the machine runs cooler with less stress to critical-wear parts. They deliver a significantly longer service life and need less maintenance than other laser welders. - With excess energy reduced due to more efficient design, flash lamps can deliver up to twice as many pulses as those in systems with lower efficiency. - The stabilized light path designed by the engineers requires no adjustment. MADE IN ITALY

Use the PulsePoint to: - Repair heirlooms, stone-set jewellery, timepieces and fragile or intricate components--even eyeglasses. - Repair dental crowns, partials, ridges and implants. - Repair metal defects, such as porosity, in cast pieces. - Eliminate the need for torches and soldering, especially for production runs. - Create seamless welds, even multiple welds, with no off-colour solder joints. - Ensure a safe, toxic-free work environment.

CONTACT LACY WEST SUPPLIES


50

Use the iWeld for: - Ring resizing, retipping prongs, repairing bezel settings - Reassembly of broken necklaces, bracelets and earrings - Repairing costume jewellery, eyeglass frames and watchbands - Filling porosity and creating made-to-order designs - Ideal for gold, silver, platinum, titanium and stainless steel applications. Ideal for jewellers and dental technicians. Soft-Touch Technology LaserStars Soft-Touch Beam Enhancement Resonator Technology minimizes the impact of thermal lensing and greatly reduces the effects on the beam axis, producing an improved beam shape that can be focused to very small MADE IN U.S. spot sizes while enhancing the overall weld quality. Very reasonably priced.
INFORMATION ON EITHER LASER WELDING MACHINE. FOR FURTHER TECHNICAL
LASER WELDING TWEEZERS 115070 - $6.95

CRAFFORD IWELD - LASERSTAR WELDING SYSTEM The iWeld laser is ideal for a wide range of metal joining and repair applications for the worldwide jewellery marketplace. The systems compact, portable, spacesaving design, coupled with LaserStars well known reputation for high-quality, efficient laser sources, make the iWeld an excellent value. iWeld laser systems are available in 110V and 220V single phase models while providing 40 Joule/30 Watt energy output. A variety of optical viewing systems are available to meet the specific needs of our customers applications. The iWeld is an excellent value for todays value-conscious user looking to unleash the power of hot light, benefit from a comfortable, ergonomic design and ensure optimal laser platform technology.

L A C Y WES T S UPP LIES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

Made in Germany

R I N G E N G R AV I N G M A C H I N E S
- Adjust character height from 1 to 3 mm - Depth of engraving is up to you - Weight: 15lbs - Dimensions: 7D x 13.5W x 14.75H - Made in Germany Basic Equipment: - Machine Mounting Device - Diamond Stencil rail for 32.75mm - Stencil profile - Spare tension wire for ring transport - Three brass practice rings. - 3mm Allan key - Covering Cap - Operating Instructions. Special Accessories: - Clamping chuck for stone ring. Special Engraving Templates
- Trophies - Anniversaries: wedding bells, hearts, jubilee, etc. - Coats of Arms, social clubs, organizations - Flowers, roses - Animals: dogs, cats, birds, rabbits, moose, horses

ELMA RINGSTAR INSIDE RING ENGRAVER $1450.00

Templates also available in foreign languages: Greek, Arabic, Russian, Cyrillic.

- Religious: cross, praying hands, profiles of Mary or Jesus, - Medical symbol - Karat - 10K, 14K, 18K, Plat., Sterling.

PRESIDIUM INSIDE RING ENGRAVING MACHINE


The
MACHINE

Yesterday s traditions with today s technology.

Features: - One dial produces letters with heights from 1-2mm - Adjustable letter spacing - Holds a wide variety of ring widths, from 19 to 30 mm - 100% spare parts replacement - 1 year warranty

is manufactured to the highest standard. The machine is compact, user-friendly and comes bundled with an engraving diamond tip, a circular font dial, a complete set of operating instructions, dust cover and 5 brass sample rings.

INSIDE RING ENGRAVING

Presidiums Flat Engraver makes it easy to engrave charms, lighters, pens, ankle bracelets, or anything that is flat or moderately curverd. It comes with an engraving diamond tip, set of six male pins, 2 end stops, complete set of instruction, dust cover and ID blank practise plates.

PRESIDIUM FLAT ENGRAVER & FONT

EN020

$595.00

Features: Pantograph ratio from 2.5: 1 to 6: 1. - 360 rotating vise with 8 indexing positions - work holding from 3 x 3mm up to 50 x 76mm - height adjustment up to 115mm - easy template insertion - adjustable template holder accommodates both small 31.75mm adn large 69.85mm blanks. 100% spare parts replacement.

Prices in Canadian Funds/Call for Confirmation/Prices subject to Change.

PJEM

$595.00

www.lacywest.com

51

The JWX-10 turns even the most intricate CAD designs into reality. With detailed resolutions up to 0.002mm/step, this beautifully designed 4-axis mill captures every subtle nuance of your designs. Its exacting precision produces superior custom jewellery that will delight your customers and keep them coming back for more. Jewellery makers with existing CAD files can use the JWX-10 to mill their designs within an hour after opening the box. Needless to say, this desktop device is incredibly easy to use. The JWX-10 comes with holding fixtures that secure non-proprietary, off-theshelf jewellery wax stock during the milling process. It also includes 4-axis CAM software, user manuals, tools, wax and comprehensive tutorials. The JWX-10 is a compact and fully enclosed desktop mill. It runs quietly and fits easily in any office or jewellery shop. At the same time, its work area (5-1/2 x 4-1/8) is large enough to accommodate any ring, bracelet or charm. Roland MODEL Player 4 comes bundled with every JWX-10. This powerful and easy-to-use CAM software supports continuous 4th axis milling for producing a silky-smooth surface finish. The software accepts IGES, DXF and STL files exported from all popular Jewellery CAD software applications, including Gemvision Matrix, ArtCam Jewelsmith, Type3 3Design, JewelCAD, JewelSpace and Rhino Techgems. Rolands optional PhotoWizard software and fixture bundle takes jewelry making to an even higher level. PhotoWizard lets jewellers import industry standard STL files and easily converts them into NC files ready to be milled. The software is compatible with all jewellery design software, including Gemvision Matrix, Rhino with Techgems, ArtCAM Jewelsmith and Type3 3Design. The included 3-sided ring fixture and ring arbor allow for the production of even the most complex designs. Full demonstration and set-up of software on purchase. Call for pricing

Mill wax models using any jewelry CAD software. 4-axis milling designed for intricate jewellery designs. Professional CAM software included. Compact, fully enclosed device. High-speed 20,000 rpm spindle. Fine precision 0.002mm/step. Maximum work area: 14cm (W) x 10.5cm (D). The JWX-10 is the jewellery-specific mill custom retailers have been dreaming about. Powered by a high-speed 20,000 rpm spindle, the 4-axis desktop machine quickly produces detailed wax models. It is the fastest and easiest way to create rings, bracelets and charms. Powered by a high-speed 20,000 rpm spindle, the JWX-10 offers the high-speed production that jewellery makers need to take their business to the next level. It quickly mills out models for rings, bracelets and charms in a fraction of the time it takes to produce them by hand. Typical wax jewellery models are milled in just a few hours.

JWX-10 MILLING MACHINE

ROLAND

WE SUPPLY ALL MICRO CARBIDE, PROFILING AND SHARPENING BURS.


Samples - engraved, scan, photo imprinted from Roland

SRP technology: Creates the most accurate prototypes for complex snap-fits. Proves part manufacturability better than additive methods. Handles a wide variety of materials and generates a smooth surface finish. Fourth Rotary Axis for unattended two- and four-sided milling Bundled 4-axis CAM software. 12" x 12" x 4.12" work volume. High-speed 15,000 rpm spindle for creating detailed features with fine tools. Emergency stop switch and machine cover for clean, quiet and safe work environment. Subtractive Rapid Prototyping (SRP) has several advantages over traditional additive rapid prototyping. SRP devices cost significantly less while producing prototypes out of a wider variety of non-proprietary materials with greater precision and better surface finish. With its 4th rotary axis, the MDX-40 performs both unattended two- and four-sided milling. When one side is completed, the part is automatically rotated until all four sides have been milled. This saves engineers time and reduces errors associated with rotating objects by hand. Roland SRP devices can mill parts in an average time of just over four hours. According to Todd Grimms independent study of RP systems, the SRP process saves time by producing parts that are smooth and precise right off the machine. Additive systems, on the other hand, typically require time-consuming post finishing processes. Call for pricing For more technical information please call for brochure.

MDX-40 MILLING MACHINE

52

From RX50 on acrylic

LACY WEST SUPPLIES LTD. 604-669-5229 Toll Free 1-800-667-4118

MDX15 Wax Carving

Ring Models

RX-50 Engrave on metal

JWX-10 Wax Model

MPX70 Photo Imprinter on metal

www.lacywest.com

MDX-15/20 is ideal for a variety of product design tasks, including reverse modeling, rapid prototyping, jewellery and model making, and small lot production. Select the spindle tip for state-of-the-art CNC milling, or select the Roland Active Piezo Sensor for precise 3D scanning. By testing and modifying your virtual 3D designs, the MDX-15/20 will save you time and money. Easy, unattended scanning and milling. Roland Active Piezo Sensor scanning technology. Subtractive Rapid Prototyping technology. Software included. Powerful NC mill handles light metals, including aluminum and brass. Maximum scanning Resolution: 0.002 inches. MDX-15 Maximum work area: 6 inches (X) x 4 inches (Y) x 2 3/8 inches (Z) MDX-20 Maximum work area: 8 inches (X) x 6 inches (Y) x 2 3/8 inches (Z) The Roland EGX-20 desktop engraver is remarkably easy to operate, yet large and powerful enough to handle a wide variety of engraving jobs, including awards, product serial numbers, office directories and personalized items. It has everything you need to get started immediately, including a complete suite of engraving software. Thanks to its intuitive joystick and dial controls, operation is uncomplicated for both novices and experienced professionals. The joystick controls the X, Y and Z axes for smooth, accurate engraving. Active Surface Tracking system prevents scratches on the material and maintains a constant engraving depth, even on bowed or nonuniform surfaces. With its 15,000-rpm spindle, the EGX-20 is powerful enough to engrave a wide variety of popular materials, including acrylics, PVC, ABS, polycarbonate and wood. With the optional diamond scraper and burnishing attachment, you can also scribe light metals such as aluminum and brass. Engraving Software Included. Work area: 8" (X) x 6" (Y) x 1.25" (Z)

MDX15/20 MODELA MILLING MACHINE

ROLAND

EGX-20 DESKTOP ENGRAVER

Finally there is CAM system specifically made with Jewellery designs in mind. PhotoWizard has a very specific RING manufacturing method. Performs 3 sided (left face, right face, ODa) operations in one task. We even have a parametric core generator! Rapid Prototyping has never been easier! Turn complex 3 or 4 axis jobs into parts in minutes with PhotoWizard. PhotoWizard is driven by 3D STL files generated by any of your favorite CAD systems. For more information see our website or call us. The protowizard is made of airplane light aluminum which is strong and durable. The light weight of the protowizard is important as not to cause any stress on the workings of the JWX10 or the MDX40. Call for pricing

PHOTOWIZARD AND RING FIXTURE KIT -R072

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

The Roland MPX-70 is the ultimate personalization tool. The photo impact printer uses a carbon-tipped stylus to permanently imprint photorealistic pictures into everything from jewellery and awards to key chains and Zippo lighters. The desktop device removes no material and operates quietly, making it ideal for jewellery stores, mall kiosks and photography studios. Personalizes pendants in less than six minutes. Achieves resolutions up to 529dpi. Imprints acrylic, aluminum, stainless steel, brass, gold, silver and platinum. Personalizes objects up to 3.54 x 3.54 x 0.78. Dr. METAZA 2 photo editing software included. Easy to use. All you need is a digital camera and computer. Create pictures, text and even add borders or do company logos. Call for pricing

MPX-70 - RESOLUTION PHOTO IMPACT PRINTER

The EGX-350 has what it takes to give your customers what they really want. Powered by a 20,000 rpm DC brushless motor, the desktop engraver produces a wide range of popular jobs with crisp text and clear graphics. Indoor signs, gifts, awards and custom rhinestone apparel all turn out perfectly. Ease of use is one of the EGX-350s core strengths. An advanced surface detector simplifies setup by automatically determining the Z-axis starting point. A hand-held control panel with a large backlit LCD screen lets you quickly select engraving options, such as spindle speed. Bundled Engrave Studio software makes it fast and easy to produce everything from simple nameplates to elegant wood signs and luxury gift items. With single stroke fonts and a special V-Carving mode, the software generates a perfect hand-carved look. It imports your designs in ai and eps file formats, and lets you preview them to save precious materials and time. You can even create design templates for heat pressing rhinestones onto custom apparel.
CALL FOR CURRENT PRICING

QUALITY. SPEED. VERSATILITY.

EGX-350 ROLAND DESKTOP ENGRAVER

www.lacywest.com

53

M A N U A L E N G R AV I N G M A C H I N E
ELMA MODULGRAV - A GERMAN

Shown Clamp for Flat Engraving

Determine Depth of Engraving

The engraver works the machine in an upright position. Writing pin and mouse are at the same level. One hand operates mouse to press diamond or cutter onto the engraving object, the other hand moves the writing pin through the templates. The engraving process can be watched at eye level while in progress. Many different style fonts available plus languages and symbols. Emblem fonts available, such as sports, animals, horoscopes, medical etc. Elma Modulgrav comes with a set of letters. Quality engraving instrument with great precision manually operated tool. For more information call or visit our website. Replacement parts and optional parts and other fonts available.
CURRENT PRICING!

The BASE MODULE consists of the base unit with mounted workplate and template rail, plus engraving mouse and diamond holder complete with diamond. Each required accessory module is mounted within seconds, making the machine ready for the requested application. Turning buttons on the machine allows the precise adjustment of the engraving pressure of the diamond, or depth adjustment of the cutter (no weights required.) Mouse and writing pin - the ergonomic solution.

The modular design of the Modulgrav is four machines in one a smart alternative to 4 separate machines. The required module is mounted within seconds and is instantly ready for operation. There are modules for: Inside ring engraving Outside ring engraving Flat engraving Cutter engraving Stepless variable height of letters between 0.5 and 6 mm Letter stretching module (optional). Optional: wide range of accessories such as 13 different letter styles, picture templates and clamping devices. Technical accessories and new applications are developed in modular design, so the machine can be extended for future engraving tasks. Easy to operate, it takes only minutes to familiarize yourself with the machine. Use the modular design to create your individual machine! Ring engraving, diamond flat engraving, cutter engraving or the complete Modulgrav all at once.

MADE MANUAL ENGRAVER

54

L A C Y WE ST SUP PLIES LTD. 604-669-5229

CALL FOR

P/N 263953

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

Sherline Lathes and Milling


SHERLINE LATHE BASIC MODEL 4100

Sherline Lathes will perform a host of tasks. They will turn, face, bore, drill, ream, polish, cut tapers, and cut both imperial and metric threads. When used with a vertical milling column attachment, it can be used for milling, fly cutting, drilling, and boring operations. A high torque DC motor with variable speed control is standard with each machine. This speed control is internally equipped with a converter that automatically adjusts from 100 to 240 volts, 50 or 60 cycles/sec without loss of torque. Standard equipment for the Basic Model 4000 (metric 4100) Lathe includes the motor and its speed controller, a 2.75 (70mm) x 6.0 (152mm) crosslide, 15 (381mm) steel bed to allow 8 (203mm) between centres, standard 1-5/8 (41mm) laser engraved aluminum handwheels, pulleys, belt, faceplate, lathe dog, two dead centres, two hexagonal keys, tool post, sharpened high speed cutting tool, 8-foot three-wire power cord and instructions. If you are new to machining, the P/N 4100A package includes everything you need to complete about 85% of all work you will probably ever attempt on a lathe. You get the the basic model plus a 2-1/2 (63mm) 3-Jaw Chuck (1041), a 1/4 Tailstock Chuck and key (1072) plus a #1 Morse Arbor and Drawbolt so the chuck can be used in a headstock spindle. As you learn more and wish to attempt other special jobs, the required accessories can be purchased as you need them.

654100 BASIC MODEL WITH CHUCKS (1041,1072) P/N 4100A - CALL FOR CURRENT PRICING -

For more product information call for a copy of the Sherline Catalog or visit WWW.Sherline.com LACY WEST SUPPLIES LTD. is a authorized Canadian Dealer of Sherline Products.

CNC Software Available

The main difference between a lathe and a mill is that on a lathe, the work turns and the cutting tool is stationary, while on a mill, the tool turns and the work is stationary. At first glance the vertical mill looks similar to a drill press, but there are some important differences, such as a spindle that can take side loads as well as end loads, and an accurate method of moving the work in relation to the spindle on all three axes. The Sherline Milling Machine can perform all of the tasks and operations that a large commercial machine can perform. Operations such as fly cutting, precision drilling, and boring are all routine tasks. Because the tool turns rather than the work, much larger parts may be worked on in a mill ( these parts need not be round). The work is securely held, thus extremely accurate hole patterns can be drilled or bored using the Sherline Vertical Mill. The longer X-axis throw also increases the machines versatility over that of the lathe with the vertical milling column attachment. Its an extremely rigid, accurate tool which accomplishes tough machining jobs with ease. Sherline Milling Machines can be purchased in imperial or metric versions. The imperial models have their feeds calibrated in .001 increments and the metric versions calibrated in .01mm increments. The machines are equipped with a high torque motor with variable speed control. This speed control is internally equipped with a converter that automatically adjusts between 100v to 240v, 50-60Hz. without loss of torque. 34378 DELUXE MILL PACKAGE P/N 5410 (METRIC) - CALL FOR CURRENT PRICING Vertical Mill with 12 base, adjustable zero handwheels, headstock spacer block (1297), 1/4 drill chuck (3072), laser engraved scales on base and table. BOOKS: Table Top Machining - Hows and Whys of machining 308 pages Home Shop Machinists Handbook - Guide for the amateur machinist features Sherline Lathe & Milling machine Sherline Shop Guide Book - Instructions sheets for all sherline accessories

SHERLINE VERTICAL MILLING MACHINE

Boost your eyes with a GRS MICROSCOPE SYSTEM


003563NFB GRS/ Meiji Microscope 003563 Same as above but, adds focus block needed for stand. 003630 GRS Acrobat Microscope Stand CALL FOR CURRENT PRICING

CALL FOR CURRENT PRICING Microscope for use with GRS Acrobat stand. Includes stereo zoom microscope body, 10X wide field eyepieces, 0.5 objective lens. Magnification range 3.5 to 22.5 Working distance 6 (150mm). Other magnification and working distances available.

CALL FOR CURRENT PRICING With outstanding flexibility, this Acrobat stand works with you, not against you. Easily positioned during work and swings away when desired. Arms move with adjustable friction or can be locked, if desired. Built-in headrest reduces neck and back strain.

Imagine seeing twenty times better than any time in your life. Instantly, you do finer work. The GRS-Meiji Microscope System is designed for working while viewing. Magnified up to 22.5 times, you can see clearly what your hands and tools are doing. No longer will your eyes limit your engraving, stone setting, jewellery making or other work. No more eye strain !

CALL FOR CURRENT PRICING Especially made for microscope work. This is unique. Has many MagnaBlock similarities and one huge difference: you can reposition its centre of rotation. Why is this important? Under a microscope, your work must stay in the field of view as you rotate the vice or you cant see it. Using a traditional engravers block, this only happens when the work is near the center of the jaws. Often this becomes an impossible limitation. The Positioning vise lets you move the center of rotation by simply pulling a lever. In seconds you can reposition your work to rotate within the microscopes field of view. This vice weights 42 pounds. 003597 Twin Lights Halogen lights 115 Volts - CALL FOR CURRENT PRICING -

003541 Positioning Vice -

003584 Headrest Kit for # 003563 Microscope - CALL FOR CURRENT PRICING 002268T Microscope Ring light (as shown attached to microscope ) - CALL FOR

PRICING

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

www.lacywest.com

55

PRECISION HAND TOOLS

Cuts perfect discs quickly and easily. High quality precision hardened steel dies cut metal up to 20 gauge. Heavy-Duty and heavy in weight, Disc Cutters makes perfect circles.

Disc Cutter Sets Made in Italy 78254 78253 78255

Large Disc Percussion Cutter Set Cuts from 19 to 24mm Disc Percussion Cutter Set Cuts from 2 to 18mm circles Disc Percussion Cutter Set Cuts from 2 to 12mm circles

$365.95 $419.95 $209.95

Economy disc cutter, great for hobbyist or student. Set of 7 punches. Punch sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8 cuts soft metals up to 8 gauge. Comes with case.

Disc Cutter India

Pepe Jump Ring Maker P30700 - $209.95

This tool is used to undulate metal plate or wire. Creates an adjustable ribbed pattern. A useful tool for creating a beaded wire effect, excellent for making fancy frames. The extended base allows for easy mounting onto a vice. Easy to use and adjust. Optional: Base for bolting Made in Italy. Excellent quality.
tool on flat surface.

Undulating Zig Zag Tool

250450

$44.95

Pepe Super Ring Bender P30100 - $219.95

This tool combines 3 important functions in 1 tool. Ring Bender, Ring Reducer and Ring Stretcher Comes with Die set, bends flat, oval and halfround. Reduces plain bands up to 12mm wide. Six-spline mandrel. 16 counter sunk dies. Sizes 1 $329.95 to 15. P185500

Ring Stretcher Reducer Bender

78291

$199.95

Spiral Coiling Tool

Excellent for making Hoop Earrings out of Tubing.

Stone Burnishing Tool Set BR730 $99.95


-available in different sizes-

Made in France. 12pc Set. Made of hardened steel and comes with tool holder handle. Set is held in wooden box with a hinged lid. Tool sizes 0.75m-7.5m.

Time Saver ! Flush Cutter of round wire.


Mini Wire Cutter
Excellent quality precision tool. Cuts wire with straight flush-cut ends. Cuts three sizes: 1.00 mm, 1.20 mm, 1.50 mm. Made of hardened steel in Italy. Best Quality tool, great for production work. Bolts onto working surface, quickly flush cuts round wire.

Easy to operate, this tool will spiral hollow tubing or wires. Wires can be round, square, half round, or fancy shaped. Comes with a set of steel mandrels measuring from 4 mm to 25 mm round. Also available: steel mandrel set in oval shape sizes ,6x4, 8x6, 9x7,10x7.5, 11x8.5, 12x9, 14x11, 16x12, 20x15 mm. Black coated, hardened steel. Made in Italy.

78259

Quality tools for quality results!

$399.95

78299

$89.95

MILLRITE Millgrain Machine MG345 $795.95 Miter Cutter Jig Made in France

MilIgrain Patterns Available - Coin edge, rope edge, traditional and others.

Tube Cutter Italy SH730 Tube Leveller Italy 78297

Will cut round or square tubes with precision.

56

Leveller used to file tubes with exact precison. Both instruments compliment each other. Easy to adjust. Made of hardened steel. Best Quality!

$59.95

$79.95

Alloy tool steel, hardened for wear and long life. Vise holds thin sheet, round, square bar and tubing securely, for angle cuts at 45 or 90. Additional adjustable stop for precise cuts to length. Maybe hand held or fixed in bench vise. Measures 2x2.5x 3/8 inches.

L A C Y WE ST SUP PLIES LTD. 604-669-5229

HO005

$269.95

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

This unique device has all the features needed to create professional decorative designs on ringssize 2-13. A sturdy machine that includes a workholding device, a tool clamp, and an ingenious tool feed mechanism. All moving parts are ground for a precision fit. Easy to operate with minimal effort. Imprinted designs exhibit a high degree of brilliance. Use with lathe millgrain tools. Comes with one Millgrain pattern tool. There are 21 different patterns available. Call for more info.

Ring Sizer Upright

Reduces and enlarges wedding ring sizes without effort. Can be bolted to a bench or used as a portable. This well made sizer has 6 splines on the enlarging mandrel and takes up to size 15. The reducing plate has sixteen openings, smoothly polished to prevent marring of rings.

PRECISION HAND TOOLS


Heavy - Duty

78270 Italian Heavy-Duty $349.95 Trademarked Italy of heavy construction. P18500 Upright Ring Stretcher&Reducer - $259.95 P185500 Combo Ring Stretcher, Reducer and Bender. $325.95 Italian Ring Bender

This tool rolls out the shanks of stone-set rings to stretch the metal and enlarge the size. Has 17 polished rollers for different sizes and styles of rings. Can also be used on wedding bands. This easy-to-use, Italian-made enlarger is of the highest quality. Will not mar rings.

78285 $295.95

Ring Enlarger

not mar rings. Lighter construction than the Italian model.

Economy tool with 17 rollers, will

P142500 - $195.95 Ring Enlarger

For bending half-round, flat, oval and engraved ring blanks into circular shapes. Mandrel is stepped to accommodate various ring sizes, and two matching dies are provided for flat and half-round material. This is a Heavy-Duty rugged tool suitable for production work. Italian.

35PA

Econo Ring Bender #48300 - $89.95


MADE IN INDIA

Of a lighter construction than the Italian Ring Bender. Bends flat, oval and half round blanks up to 4mm thick. Includes two precison machined and hardened forming dies. Stepped to accomodate a variety of ring sizes and blanks.

Pepe Ring Bender

$499.95

P18600

$299.95

strongest alloys in less than 10 seconds, safely, without heat or discomfort. High quality, powerful cordless motor comes with a handy recharging unit. Since its cordless, you can take it anywhere, making it ideal in emergencies. Chrome blade assembly can be sterilized. Comes with a 3 year warranty on cutting unit (except blade).

Electric Ring Cutter In an emergency, speed, safety and comfort are essential. Cuts the

480610 - $299.95

-SWISS MADEUsed to create all types of round, undulating, serpentine or special forms in wire or thin gauge metal. Fine screw adjustment provides a convenient stop and assures consistent forms with repeatability.

Wire Bending Plier

PJ725 - $229.95

Tube Holders Seven collets ranging in size from 1/32 to 1/4. Firmly holds tubes for stone setting without collapsing. Collets fit into wood handle with screw chuck. 53150 - $15.95

Canadian Dealer of Fretz Miniature Stakes Wonderful tools for fabrication of Fine Jewellery.
Prices in Canadian Funds/Call for Coonfirmation/Prices subject to change. 57

www.lacywest.com

PARALLEL ACTION PLIERS AND CUTTERS


1 2 3 4
Jaws open and close parallel along entire length, allowing square, vise-like grip. Handles and jaws are nickel plated. 1. HEAVY FLAT-NOSED PLIERS Serrated jaws with V slot running length of jaws for holding wire. 46506 Overall Length 5-1/2" $24.95

P R E C I S I O N

Bio-Spring Pliers Ergonomic Lindstrom Sweden

P L I E R S
RX7490 RX7590 RX7890 RX7892 RX7893 RX8140

Jaw length 3/4 Jaw Width 3/8 Overall 5-1/4 Jaw length 3/4 Jaw Width 3/8 Overall 5-3/4

Flat Nose

Round Nose

$64.95 $69.95 $69.95

Jaw length 1-1/4 Jaw Width 3/8 Overall 6-1/8 Jaw length 1-1/8 Jaw Width 3/8 Overall 6-1/8 Jaw length 1-1/4 Jaw Width 3/8 Overall 5-1/4
New concept in pliers, adjusts to give correct feel when crafting. Precision box joint, super smooth pivot movement, ergonomic handle design.

Long Chain Nose

Curved Chain Nose $74.95 Short Chain Nose Flush Cutter $69.95 $74.95

46516

3. COMBINATION PLIERS Flat nose pliers with serrated jaws and V slot, combined with a wire cutter. 46514 Overall length 5" $30.95 4. CHAIN-NOSED PLIERS Smooth jaws with cross-slot. 46.520 Overall length 5" Overall length 5-1/2"

2. LIGHT FLAT-NOSED PLIERS Serrated jaws with V slot, or smooth jaws. Overall length 5" 46512 Smooth jaws. $25.95

Steel Screw Tap and Dies


728
Set of 5 Taps: 0.6, 0.7, 0.8, 0.9, 1.00 mm

Used for making earring screw posts, etc.

$32.95

TAP19855

Economy

Set of 8 Taps: 0.6 - 2.0 mm

5
LINDSTROM Swedish Steel

$34.95 Parallel Pliers made in England. 46.532 $31.95

5. PARALLEL ACTION DIAGONAL CUTTER Spring-action handle. 5-1/2" long with maximum jaw opening of 1/4.

Yellow Handle, Micro Cutters, Lap Joint. lgth. jaw Price Code Style 8140 Micro bevel 4.33 0.39 $59.95 4.33 0.39 $59.95 8141 Flush cut 8150 Micro bevel 4.43 0.49 $59.95 8151 Flush cut 4.75 0.43 $69.95 4.92 0.63 $64.95 8160 Micro bevel 8162 Flush cut 4.92 large $64.95 White Handle, Pliers, Box Joint. 7190 Side cutter 4.29 0.35 $59.95 7191 Diag cutter 4.25 small $56.95 7290 End cutter 4.25 small $69.95 7291 End cutter 4.25 0.59 $69.95 7490 Flat nose 4.72 0.79 $49.95 7590 Round nose 4.72 0.79 $54.95 7890 Lg chain nose 5.20 1.26 $54.95 5.08 1.14 $62.95 7892 Curved chain 7893 Chain nose 4.72 0.79 $54.95

Lindstrom Swedish Pliers Highest Quality

$19.95

$32.95 46322

Oblique Cutter Flush PLR38025 PLR38020 End Cutter Semi Flush PLR38016 Side Cutter Pointed Jaw Flat Nose PLR38005 PLR38000 Chain Nose PLR38010 Round Red/Black Handles, Box Joint, Leaf Spring

Ergonomic 4-3/4 Pliers German

Colibri Swiss $189.95

$ 29.95

Loop Closing

Jaws are hollowed out and smoothly finished for closing small loops,bows, jump rings,etc. Length 5-1/4.

$9.95

46338

Ring Holding

Jaws are hollowed out and curved to hold rings while filing or polishing. Heavy-duty pliers. Length 5-1/4. Box joint.

46303

$9.95

Bow Opening Heavy-Duty with spring action to open pliers.Length 5- 3/4.All steel pliers.

46316

$13.95

Coiling Pliers 3 Steps wire looping pliers. 46334 German 2 tier 5

Brass Lined Flat Nose Brass lined to prevent marring of finishes and damage to delicate parts. 4-1/2 Length. Box joint.

462101 Piano Wire Cutters Heavy Duty German 5-1/2 Jaw 1/2

$59.95

Chain Nose

Flat Nose

58

Our most popular pliers are made in Germany for Lacy West. Two qualities are available-box or lap joint. Forged steel, polished, with plastic coated handles.

48180 Ring Cutter MADE IN FRANCE Light weight with knurled handle with 20mm Blade $49.95 48192 Replacement Blade $12.95 48220 Beaver Ring Cutter Most popular model, ergonomic design handle in molded plastic with 19mm Blade.USA $209.95

Round Nose

Micro Bevel Cutters

Light weight Metal Snips Cuts hard sheet B&S 20, soft sheet B&S 16. Blades 1 /12. Length 7. Made in Germany A. 53800 A. 53802 B. 53804 B. 53808 Straight blades. Curved blades. Straight blades. Curved blades.

$49.95

Multi Size Wrap n Tap Pliers PLR74602 - $34.95

LA C Y WEST SUP PL IES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

Prong Lifter Pliers Provide gentle pressure on the prong and no pressure on the stone. Avoid mar or fracture. German. Overall length 5 inches, double leaf spring. 460059 $23.95

$16.95 $20.95 $15.95 $21.95

Black handled , nickle plated, premium-quality German tool steel, smooth jaws with spring action. Box joint, spring action, smooth non-mar jaws. $22.95 11866 ROUND NOSE SMALL Overall length 5. Jaw size 3/4. For delicate work. 46178 ROUND NOSE LONG $27.95 Overall length 5-1/4, Jaw size 1. Polished nickle plated and smooth jaws. 46056 CHAIN NOSE SMALL $21.95

P R E C I S I O N

Red handled, premium-quality, German tool steel, smooth jaws. 46156 FLAT NOSE SMALL Overall length 5-1/4, Jaw size 1, 5.8mm wide. Box joint, smooth non-mar jaws. $21.95

P L I E R S

46176 FLAT NOSE LONG

Box joint, spring action, smooth non-mar jaws. $24.95

Overall length 5-3/4, Jaw size 1-1/2, 5.0mm wide.

$27.95

11865 CHAIN NOSE LONG

Overall length 5-1/4, Jaw size 1. 11864 FLAT NOSE

Overall length 4-3/4, Jaw size 3/4. For delicate work

Box joint, smooth non-mar jaws. 46348 STONE SETTING $39.95 Overall length 5, Jaw 1/2 for stone setting and tightening the prongs on stone set rings. Inside jaw, one side grooved for prong, one side flat and smooth. Box joint, smooth non-mar jaws. 46124 DIAGONAL CUTTERS $29.95 Overall length 4-1/2, Jaw size 1/2. Semi-flush. Lap joint, spring action, smooth non-mar jaws. $29.95 461261 DIAGONAL CUTTERS Overall length 5-1/4, Jaw size 3/4. Semi-flush.

Box joint, spring action, smooth non-mar jaws. $22.95

Overall length 5-1/4, Jaw size 1, 6.0mm wide. Box joint, spring action, quality cutters 46126 SIDE CUTTER LARGE 11371 RING BENDING 46041 SIDE CUTTERS SMALL Overall length 4-1/2, length of cut 1/2.

$34.95

For shaping ring shanks and other applications.

Inside jaws, half-round and flat.

Overall length 5-1/4, Jaw size 1.

Box joint, spring action, smooth non-mar jaws. $29.95

Overall length 5-1/4, length of cut 3/4.

$35.95

Box joint, smooth non-mar jaws. $21.95 46172 CHAIN NOSE Overall length 5, Jaw size 1. $29.95 46324 CHAIN NOSE LONG Overall length 5-3/4, Jaw size 1-1/2. $39.95 46186 CHAIN NOSE/CUTTER Overall length 5, Jaw size 1 with side cutter. Lap joint, smooth non-mar jaws. 46424 END CUTTERS Overall length 4-3/4, Jaw size 1. Jaws set at right angles. Length of cut 3/4. Excellent quality durable pliers.

$29.95

Box joint, spring action, quality cutters. 46062 END CUTTER

Box joint, spring action, smooth non-mar jaws. B11865 CURVED NOSE $22.95 Overall length 4-3/4, Jaw size 3/4. For delicate work, curved jaw edges allow for working in hard to reach areas. $39.95

(not plated) Smooth jaws. Blue handled.

Small jaw, spring action, Precision steel

PJ053 FLAT NOSE

Box joint, spring action, smooth non-mar jaws.

Jaws set at right angles. Flush cut end cutters.

Overall length 5-1/4, Jaw size 1. Length of cut 3/4.

Box joint, smooth non-mar jaws. 46190 ROSARY PLIERS $39.95 Round nose and side cutters. Overall length 5-1/2, Jaw size 1. Round nose measures 1/2, length of cut 5/16. Box joint, smooth non-mar jaws. 46178 ROUND NOSE LONG Overall length 5-3/4, Jaw size 1-1/2. 46164 ROUND NOSE SHORT Overall length 4-3/4, Jaw size 3/4. 46307 BOW CLOSING PLIERS

Box joint, smooth non-mar jaws. 46114 RING BENDING $29.95 Overall length 5, Jaw size 1. Inside jaws, one jaw is flat, other jaw is half-round. Excellent for shaping ring shanks and other applications. Quality durable pliers.

$27.95

$21.95 $59.95

$27.95

Economy Pliers Made in Pakistan


Round Nose Flat Nose Chain Nose Side Cutters End Cutters 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 length length length length length

Styles of Pliers and Cutters Chain nose - pliers used to make bends, loops and similar forming operations. Flat Nose - for gripping, holding flat or square objects securely and making angular bends. Round Nose - for making bends, loops, circles, coils from wire or sheet. Cutters - for cutting a variety of wire. Blue Blue Blue Blue Blue Handle Handle Handle Handle Handle $9.95 $9.95 $9.95 $9.95 $9.95

For closing small bows, loops, etc. Standard weight pliers with one brass jaw to prevent marring. Overall length is 5-1/4".

46306 Ring and Bow Closing Pliers

Box joint, smooth non-mar jaws.

Prices in Canadian Funds/Call for Coonfirmation/Prices subject to change.

German precision pliers made for Lacy West Supplies Ltd. Finest quality pliers.

Heavy Duty for bending and closing. 6-1/2 Length.

$54.95

www.lacywest.com

59

ROLLING MILLS AND TOOLS


High capacity rolling mill with large flat area 140mm. The most powerful, robust and high specification rolling mill available 2.5 HP. Powerful enough for continuous operation (unlike other models available which are only intermittent duty). Variable speed as standard (5 - 40 r.p.m.). Incorporating emergency stop button and forward and reverse. Two sets of extension rolls. Large easy to read calibrated disc giving exact roll measurement. Including easy to operate hand wheel. Work light. Very compact. Dimensions 600mm x 400mm x 560mm (24 x 16 x 22). As you would expect from Durston, the rolls are high quality Swedish roll steel, specially heated to RC 63 / 64 for maximum hardness. These run in high load roller bearings guaranteeing a perfect rolled product. Roll Size 140mm x 60mm Sheet Capacity (thickness)- 6.5mm Durston Power Mills available - special order. Width of Sheet- 140mm DRM 130 Power Mill 130mm Combo Wire Capacity- 15mm - 1mm D2-140 Power Mill 140mm Stacked Mill No. of Wire Grooves- 19 Double sided F130 Power Mill Flat & Wire Drive- 2.5 HP Flat Power Mill 200mm x60mm Speed- Variable 5-40 rpm Extension Rollers- (top) 4 'D' Grooves 4, 3, 2 & 1.5mm Extension Rollers- (bottom) 3 'D' Grooves 8, 6 & 3.5mm Dimensions- in mm 600 x 400 x 560 Optional stand for D2 140mm Power Mill

DURSTON Power Mill D2 -140mm 28112

P18700 P18800 P18900 P18720 P18820 P18920

Flat-90mm Flat-110mm Flat-130mm Combo-90mm Combo-110mm Combo-130mm -

Quality Tool available in 6 inch or 12 inch Guillotine Shear

$595.00 $625.00 $675.00 $625.00 $649.00 $695.00

PEPE Rolling Mills


42.6mm 55mm 65mm 55mm 65mm 42.6mm 90mm 90mm 110mm 110mm 130mm 130mm

ROLLER DIA. ROLLER WIDTH MAX OPENING 0-5mm 0-5mm 0-4mm 0-5mm 0-4mm 0-5mm

WITH REDUCTION GEAR


110mm 48mm 38mm 57mm 90mm

FLAT AREA SQUARE WIRE (MM) 130mm -------------------------------------

--------------2.5x1;3x1.25;4x1.5 2.5x1;3x1.25;4x1.5

-----------------------------

HALF-ROUND WIRE (MM)

1.0,1.5,2.0,2.5,3.0,3.5,4.0

1.5,2.0,3.0,4.0,5.0

A quality precision tool. Blades are made of hardened steel for flush cutting of sheet metals. Can be easily mounted on a table top. Operate manually by pulling down guillotine arm for cutting. Maximum width of sheet six inches. 6" Blade built to last for 10,000 cuts. Squared work surface. An easy to read, adjustable ruler with cutting guide. All steel construction, mounts to any work surface. Open back designed with a convenient receiving table Bench space requirements 11 1/2" W x 30 1/2" D P19690 $695.00 Squared work surface. An easy to read adjustable ruler with cutting guide. All steel construction, mounts to any work surface. Open back designed with a convenient receiving table. Bench space requirements 19 3/4" W x 39 1/4" D

Heavy Duty Guillotine Shears - 6 Inch

1.0,1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0 2.5x1;3x1.25;4x1.5

Heavy Duty Guillotine Shears - 12 Inch

Jump Ring Maker

P30100

allow the user to exert less strength in bending metal and a greater variety of bends.

Super Ring Bending and Forming Tool


$219.95

P19691

$949.95

Heavy duty bending tool. Strong but versatile bending tool provides a greater torque strength to

All accessories are attractively placed on a wooden base for easy placement and storage.

winding rods range from 2.5 mm to 12.5mm in diameter. The coiled wire holder is designed for cutting the wire with a separate cutting disc using a flexible shaft tool.

dard Jacob-style handpiece on a flexible shaft motor. Jacob-style handpiece is also provided in the set. 20 inner core

Jump Ring Maker

Jump Ring Maker system allows the user to make jump rings by using either the hand winding Jacobs chuck or a stan-

Tube Bender

P30700

$219.95

Heavy-duty, hardened steel base with forming dies to for easy, polished aluminum handle. Includes 8 precision machined and hardened

Pneumatic Sprue Cutter

precision tube bending!

60

L A C Y WE ST SUP PLIES LTD. 604-669-5229

P30400

$299.95

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

Eliminate manual cutting by using this foot operated, air powered bench sprue cutter. Requires air compressor at 60-80 PSI. May be hand operated when not on stand. Complete set includes: nile cutter, point blade stand, foot pedal, air hose,connectors. For cutting hard metals - Optional : available with Tungsten Carbide Blades.

PJ941

$595.95

CE

ROLLING MILLS BY DURSTON


Durston Rolling Mills Known throughout the world as being of the highest quality, with a robust design and appearance. Employed by craftpersons for a wide variety of jobs, including gold and silversmithing, and jewellery manufacturing. Can be used for wire shaping, metal flattening, and patterning. Durston rolling mills are fitted 130mm Combo Mill with self- lubricating bearings DRM-130 guaranteed for life. New Design Improvements CE Approved Highest standard 100mm MILL COMBINATION of engineering excellence for the W IT H OU T G EA R European market. Exclusive to Durston mills are 2811621 100mm Roll Size 100 x 50mm the extension rolls. Lifetime Flat Area 64mm guarantee on the bronze oilite Wire Area 19mm (9 grooves) bearings. All rolls are of the Extension Rollers: 1.0,2.0,3.0,4.0mm highest quality swedish steel, Maximum sheet thickness 6mm. hardened to 67/64 Rockwell C 1 00mm C O MB O FLAT/WIRE and ground to perfection. WITH GEAR (Ratio 4 TO 1) CALL FOR CURRENT 281162 100mm PRICING Roll Size 100 x 50mm

CE

CE

Groove Indicator for wire.

Double rollers and high quality hardened helical gearing for long life. Models D2 and D4 all have a sheet capacity of 7mm and offer a working wire area of 115mm. Calibrated disc is easy to read. D2-120 Model Roll Size 120 x 60mm 120mm Flat Area Extension Rollers: 3, 2.5, 2mm Gear Ratio for wire: 7 to 1 Gear Ratio for sheet: 3.5 to 1 Model D2-140 Roll Size 140 x 60mm Flat Area 140mm Extension Rollers: 3, 2.5, 2mm Gear Ratio for wire: 7 to 1 Gear Ratio for sheet: 3.5 to 1 These machines have two sets of rolls, one for sheet (extended for D-shapes) and the other grooved for wire. Set in high quality, maintenance-free bronze oilite bearings that are guaranteed for life. Model D4-158 Roll Size 158x60mm Flat Area 158mm Extension Rollers: 4 DRollers: 4,3,2 and 1.5mm Gear Ratio for wire: 5 to 1 optional 2.5-1 Gear Ratio for sheet: 11 to 1 optional 5-1 Number of wire Grooves: 19 As with the D2 120 there are two sets of rolls with the sheet rolls extended for D shapes (4 D). Same high quality specifications on the bearings and roll steel. A triple stage reduction is used for easy rolling and minimum effort. Option: for a second turning handle which reduces gearing ratio by half, making the rolls turn quicker.

STACKED MILL WITH GEAR

28117

120mm

High tensile aluminum bearing housing (aircraft spec.) giving great strength yet very light in weight. Oilite, maintenance-free bearings with high strength steel frame shafts. Extra-fine adjustment with clear calibration on top of machine. Swedish steel rollers, manual power.

MINI-COMBINATION MILL

28115

281172

140mm

281175

Roll Size 130 x 60mm Flat Area 80mm Wire Area 1-12mm (11 grooves) Extension Rollers: 1.0,2.0,3.0,4.0mm Sheet Capacity 7mm thickness

1 30mm C O MB O FLAT/WIRE WITH GEAR (Ratio 6 TO 1) 28121 130mm

Flat Area 64mm Wire Area 19mm (9 grooves) Extension Rollers: 1.0,2.0,3.0,4.0mm Sheet Capacity 6mm thickness

DRAW BENCHES.

Length of Rollers: 80mm Flat Area: 60mm Wire Area: 20mm (1,3,5,7mm) Rollers: Single Pair Gear Reduction: None

80mm

Precision quality. Three models are available. All with the option of direct drive or 4-1 gear ratio. This option comes as standard. Drawbench 120cm 281812 Draw Bench 60cm 281811 57055 Tongs with interchangeable jaw 57059 Tongs for wire pulling Made in Italy

158mm

Canadian Distributor for Durston Mills. For more information on larger mills please call.

The D2 and D4 are also available as electric mills.

Patterns and shapes can be made to customers specifications. Wire and strip rolling mills and larger electric mills are available by special order. Durston also includes easy to follow instructions with maintenance tips to insure years of trouble free use. For more information please contact Lacy West Supplies at: 1-800-667-4118. www.lacywest.com.

DURSTON PATTERN-MAKING MILLS

Roll Size 150 x 60mm Flat Area 100mm Wire Area 1-12mm (11 grooves) Extension Rollers: 1.0,2.0,3.0,4.0mm Maximum sheet thickness 7mm.

1 50mm C O MB O FLAT/WIRE WITH GEAR (Ratio 6 TO 1) 28122 150mm

Excellent height for working. Measures 36 1/2 H x 10 1/2 W x 10 1/2 D. Sturdy construction

MINI MILL STAND 281155

This stand will support all Durston hand mills and is drilled and tapped with appropriate holes. Bolts are supplied for the mill required. The stand has storage space with two shelves and locking door. Sturdy construction. 10ga & 0.25 steel plate. Measures 33 H x 13 3/4 W.x 11 3/4 D.

CABINET STAND

281171

ELECTRIC CABINET STAND 281154

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

Stand for Durston electric models. Robust and well made. Ready for assembly. Storage space with locking door. Measures 30 H x 24 W x 14 D.

www.lacywest.com

61

JEWELLERS BASICS

Ruggedly constructed work bench. 48W x 22D x 38H. Weight: 150 lb. Two pull-out dust drawers. Two locking top drawers, two arm rests, and an extra flat pull-out for greater working surface.

Master Bench

Benches supplied with bench pins.

Wooden bench

PN100

$ 1095.95

Silver colour

MO50

3 side drawers, two sliding arm rests. 39W x 20D x 39H One pull-out dust drawer. High railing prevents supplies from falling off the back or sides. Hidden inside shelf for extra storage.

Small Wooden Bench

$ 479.95

MO40

2 slide drawers, two sliding arm rests 38W x 20D x 36H. Two pull out drawers for storage Predrilled hole for bench pin (included Laminated top hardwood workbench Three side railing and skirted legs.

$449.95

BP153 - Small Bench 28x20x36 - $269.95 BP292 - Small Tool Hutch - $49.95 BP101 - Lrg Bench 35x21x37 - $299.95 BP192 - Lrg Tool Hutch - $69.95

Deluxe Chinese Jewellers Benches and Tool Hutches

Arbe Lamp 55 Watts Arbe 22 watt Magnifier Bench Lamp JF155 $129.95

6500K.Daylight.With C-clamp base attaches on to table. 110V

JF30LEB

$149.95

Dazor Lamps 2 or 3 Bulbs

C-Clamp/Heavy Base

C. Double End Pin Vice Brass and nickel plated with steel collets at both ends. Capacity 0".099. 58215 $9.95 D. Swivel with Wood Handle PIN22400 $5.95 E. Sliding Pin Vise 58300 $11.95

B. Double End Pin Vice Four mouth reversible chucks. 99814

A. Square Chuck Pin Vice Nickel plated. Capacity: 0".079". 58250 $6.95 $5.95

Pin Vices

A.

B.

Tube Holders

B. Centre punch, made of steel, slim design. 47900 $1.95

A. Automatic centre punch, punch is pointed. 47860 $25.95

Centre Punches

Plastic Vernier Gauge 0.1mm x 150mm

Well made, precision gauge measures in inches and millimeters. Capacity 6 1/4 " or 179 mm. Reads 1/128" or 1/20 mm. Thumb release lock. Comes with pouch. 150 mm by 0.1 mm.

Stainless Steel Vernier Gauges 35178 $74.95

Dazor Lamp Floating Arm No exposed springs or wires, easily positioned. Fluorescent lamp 15W daylight, Gray colour. 5 Year Warranty. UL Listed. 113356 $269.95 C-Clamp 3 Bulb 2251 $19.95 - 18 Varilux Bulb

Made of stainless steel. Measures inside and outside in inches and mm. Capacity 0-6 inches with 0-150mm with 0.01mm resolution. Includes zero set button and depth measuring rod.

Digital Vernier Gauge 35180 $49.95

Protective carrying case and battery included.

Universal Engraving Holder

Seven collets ranging in sizes from 1/32-1/4 firmly holds tubes for stone setting without collapsing. Collets fit into wood handle with screw chuck. 53150 $15.95 Designed to hold objects of various shapes for engraving or stone setting. Head in aluminum with four nickle steel pins. The wooden handle can be removed to place the head in a bench vice. A very handy tool, excellent for engraving on flat pieces . Good Quality Tool.

26500

$11.95

35400

$23.95

Inch and millimeter gauges, capacity of 3" or 80 mm. Graduations by 1/16th" and 1 mm.

Brass Pocket Sliding Gauge 750

Gauge is accurate to 0.02 mm. Measures 0 to 150 mm. Easy-toread adjust to zero dial, and thumb-roller action with lock.

Stainless Steel Dial Gauge

35181

Ear Jig

$49.95

Graduations by 1/10 mm. Capacity 150 mm. German Made. 35012 $54.95 401200 - economy - $19.95

Degree Gauge

Jo-Di Diamond 35551 - $59.95


53140 BEZEL PUSHER 53142 BEZEL ROLLER
Used for pushing bezels around stones. Used for rolling bezels around stones.

Weight Gauge

62

L A C Y WES T S UPP LIES LTD. 604-669-5229

$9.95

Easy wire makes ear wires in sec. Instructions inc.

HOL100 $29.95

P14700 PRONG LIFTER

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

Pries prongs loose from stones. A time saver.

53146 PRONG PUSHER

$16.95

$5.95

$9.95

$9.95

JEWELLERS BASICS
10K 14K 18K 19K 22K 24K Mark

Karat Stamps (BENT)


10k 14k 18k 19k 22k 38921 Code $17.95 $17.95 $17.95 $39.95 $17.95 $17.95 Price

Chinese White
26160

When melted, can be applied to surface so that pencil will leave an impression.

585 750 925

SS ST Sterling STER PT PT950 Plat.

38927 38924 38923

SS 38904 55302 6921 PT 38950 38925

$19.95 $19.95 $20.95 $17.95 $17.95 $17.95 $17.95 $17.95 $29.95 $29.95

$19.95

13300 13301 13302

Bench Pins

5 1/4 x 2 1/4" 6 1/4 x 2 1/2" 7 x 2 3/4"

$3.95 $3.95 $4.95

Code 49700A 49703A 49704A 49705A 49706A

STANDARD ADJUSTABLE SAWFRAMES GERMAN & ECONOMY


Depth 2-1/4 3 4 5 6 Price $14.95 $14.95 $16.95 $28.95 $31.95 Economy 49700 - $ 7.95 49703 - $ 8.95 49704 - $10.95 49705 - $12.95 49706 - $15.95 (8) 49708 - $17.95

Multi-Sizers
5901

Plastic ring sizers. Package of 10

V-Slot Board & Clamp


7-1/2L x 2- 1/2W 13361 $1.95 Extra Board 13362

Sawframe 2-3/4 Deep. Grobet Swiss

Made in Germany. Favorite of jewellers. Serrated clamps hold blades securely. 49720 Adjustable $14.95 49722 Fixed $14.95 Adjustable revolutionary design. Lightweight, bladelock design eases blade insertion, perfect alignment. High quality spring steel.

$9.95

$3.95

742 743 744 493002

Quality wood clamp with leather jaws for holding rings and jewellery pieces securely. One side of clamp is round, other side is square.

Bench Pin in Holder


13320

Cuttle Bone
22930

48125 48126 RCL65000 $11.95

BEST QUALITY

$7.95 $5.95

Can be screwed to edge of bench. Thumbscrew locks in wooden bench pin. Measures 4 wide.

$12.95

LACY WEST PRIVATE BRAND SWISS

Steel L-Square
2 1/2 3 4 5

$ 5.95 $ 6.95 $ 9.95 $15.95

Wood Ring Clamp

For casting small objects by pressing model directly between two pieces of cuttle bone. Package contains six pieces. Technical information available.

$13.95

6" Steel Ruler


492

Made of tough Dupont material. Black plastic. 48100 $5.95

Plastic Ring Clamp

Jewellers Saw Blades Filing Bench Pin


13200 $7.95 8/0 7/0 6/0 5/0 4/0 3/0 2/0 1/0 0 1 2 3 4
Antilope (GERMAN)

$1.95

Code 43639 43640 43642 43644 43641 43643 43559 43560 43561 43562 43509 43510 43511 43512

Iron Binding Wire 8oz.


Dia. .020 .016" .0125" .010" .014" .011" 14 ga 16 ga 18 ga 20 ga 14 ga 16 ga 18 ga 20 ga 30ga 28ga 26ga

Copper Wire 5oz. Spool. Brass Wire 1oz. Spool. Stainless Steel
503071 503072 503073 $ $ $ $

Price $ 8.95 $ 8.95 $11.95 $15.95 $10.95 $13.95 8.95 8.95 8.95 8.95

Double clamp on stand, adjustable. 54085 $10.95

With cross-locking tweezers. HO010 $14.95

Third Hands

Fibreglass Brush
16332

For removing rust and dirt from metal. Bristles mounted in plastic case. $5.95

Wax Sawblades

Hand Brushes
16095 16311

Spiral Sawblades

$11.95 $12.95 $12.95 $13.95 $29.95 $29.95 $29.95

Combo Bench Pin

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

Adjustable clamp allows use on benches up to 2 thick. Replaceable wooden bench pin measures 1-3/4W x 4L. Flat steel anvil makes this a very versatile tool. 375 $12.95 13327 EXTRA PIN $ 2.95

Brass 7 1/4"L, 3/4"H. Lucite handle. 16310 $10.95 $ 6.95

Bristle 7 1/2"L, 3/4"H. Lucite handle. $ 9.95

Cuts in any direction. Cuts rubber, wax, plastic, plaster and similar materials. Sold by the dozen. Code Size Price 49299 2/0 $3.95 49301 1 $4.95 49302 2 $3.95 405003 3 $3.95 TYPE Quill #1 Quill #2 Quill #3 Quill #4 Quill #5 Quill #6 Wood #4 CODE 162111 162121 162131 162141 162151 162161 162341

Skip-A-Tooth Every other tooth is missing to provide smooth cutting and non-loading action. Sold by the dozen. 49320 $3.95

GROSS $39.95 $29.95 $29.95 $29.95 $28.95 $20.95 $20.95 $20.95 $20.95 $20.95 $20.95 ===== $20.95

DOZEN $4.95 $3.95 $3.95 $2.95 $3.00 $2.50 $2.50 $2.95 $2.95 $2.95 $2.95 ==== $2.95

GROSS $34.95 ===== $31.95 $28.95 $24.95 $20.95 $20.95 $20.95 ===== ===== ===== $24.95 =====

Private Brand SWISS

SOLD BY THE GROSS Made for Lacy West Swiss Sawblades Excellent Quality

PRIVATE BRAND

DOZEN $4.95 ==== $3.50 $2.90 $2.50 $2.00 $2.00 $2.00 ==== ==== ==== $2.50 ====

Brass 8 1/4"L, 3/4"H. Wood handle. 16313 $10.95

FLUX BRUSHES (CAMEL HAIR)


PRICE $2.95 $2.95 $1.95 $1.95 $1.95 $1.95 $2.95 TYPE Quill #7 Quill #8 Quill #9 Tin Brush Wood #1 Wood #3 Wood #5 CODE 162171 162181 162191 16225 16231 16233 16235

Steel 8 1/4"L, 3/4"H. Wood handle 16350 $ 9.95

Brass 13"L, 1"H. Wood handle

PRICE $1.95 $1.95 $1.95 $1.95 $1.95 $2.95 $2.95

www.lacywest.com

63

Top cleaning results with Sweep technology High ultrasonic power with the latest processor-controlled generator technology Durable, economic and available in 8 sizes. Sizes listed are most popular for the jewellery industry. The cleaning period can be set to permanent operation or short term operation. The unit automatically shuts off after 12 hours. Temperature settings allow adjustment between 30 and 80C, variable in 5 steps. Plastic cover reduces the noise and accelerates the heating process. Operation of unit is easy. Baskets available for all ultrasonic cleaners. ELMASONIC E TANK LITRE/ GALLON TANK INTERNAL 151Wx137Dx100Hmm ULTRASOUND PEAK PERFORMANCE - 240 60 HEATING POWER DRAIN VALVE DIAMETER NO NO CARRYING HANDLES CODE NUMBER E15/H

Elmasonic E Ultrasonic Cleaning Units

Ultrasonic frequency 37 kHZ One Year warranty Ultrasonic with timer, heater and sweep.

Elma Ultrasonics

U LT R A S O N I C C L E A N E R S
Authorized Canadian Dealer for ELMA PRODUCTS

E15H 1,75 / 1/2GAL

E30H 2,75/ 3/4 GAL E30/H $399.95

PRICE -

$319.95

240Wx137Dx100Hmm 320 200 NO YES

E60H 5,75/ 1-1/2 GAL E60/H $795.00

300Wx151Dx150Hmm 400 400 3/8 YES

E120H 12,75/ 3-1/2 GAL E120/H $1095.00

300Wx240Dx200Hmm 600 600 3/8 YES

E180H 18/ 5 GAL

E180/H $1325.00 a

327Wx300Dx200Hmm 600 800 3/8 YES

Ultrasonic cleaner, dilutes 20 to 1 for light cleaning, dilutes 40 to 1 for heavy cleaning.

Magic Luster Cleaner US110 Quart $ 6.95 22668 Gallon $24.95

23625 - holds 16 rings/ 5.5x3.5 (no legs) $3.95 23627 - holds 32 rings, 2 tiers/ 4x4.5 $4.95 MAGIC GREEN ULTRASONIC CLEANER

23624 - holds 16 rings/ 4x4.5 $5.95

ULTRASONIC RING RACKS

Revolutionary patent pending design. Combination ionic and ultrasonic technology. Fastest cleaner in the world, most items in 60 seconds Ionic and Ultrasonic functions can be used together or individually. Safely cleans delicate jewelry such as opals. One minute autocycle for dual mode cleaning. Includes full 1 year warranty. 60 minute timer for ultrasonic cleaning. HS2Q - 2Qt - $329.95

IONSONIC CLEANER

Ideal when using ultrasonic cleaners or steamers. Insulates and provides resistance to heat. 102 - 10 - $11.95 / 103 - 8 - $8.95

STEAM TWEEZERS

22656 - Magic Green 10lb - $85.95 22616 - Magic Green 16oz - $15.95 22608 - Magic Green 8oz - $ 9.95

Basket Stone Saver 99812 $3.95

64

L A C Y WE ST SUP PLIES LTD. 604-669-5229

GEMORO 1.2 Quart Ultrasonic Cleaning Machine $99.00

By Hagerty plug in 110V. Holds two cups capacity,one for solution , one for rinsing jewellery.Packaged for consumer.

160321

SONIC CLEAN

$39.95

CLN65220 - EXTRA FINE BASKET FOR 2QT ULTRASONIC - $24.95 CLN65320 - EXTRA FINE BASKET FOR 3QT ULTRASONIC - $29.95

WIRE BASKETS

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

STEAMERS & CLEANING SUPPLIES


Volts,. Saves time, boosts productivity. Develops 70-90 psi steam. pedal. Height 23.5" x 17.6" Width 20.5 Depth. Weight 64 lb. 110

Steamer 2 Gallon Capacity 70-90PSI


Hoffman Steam Cleaner 2 Gallon Capacity. With Solenoid w/ foot

Steam Machine Cleaner Clean your steam machine every 30 Days. 24899 $5.95 6oz. Jar. Use as a water additive to keep machines operating at peak efficiency. An acid neutralizer. Steam Cleaner Detergent Goes directly into water while filling cleans while you work.

manual), fastest temperature/ pressure recovery. Adjustable thermoFingertip or foot switch control. Technologically-superior micronic Model JEL3 A.S.M.E. and U.L. Approved. Made in USA. cabinet ( no-rust/corrosion). Low maintenance. Easy to use. static controls. Rust -inhibited pressure tank. Rugged long-life SST

models for multiple operator application. Easy reservoir refill (auto or

Safety shielded sight glass. High efficiency 220 single and 3-phase

230877

$5.95

cleaning. Grease, grime and micro deposits disappear in seconds.

An economical steam cleaner for the workshop . The steamer is essential in achieving perfectly cleaned diamonds. The strong force of steam under pressure removes debris from hard to reach areas. Leaves polished metals gleaming. Aids in cleaning of investment after casting. Finger tip steam control. Gives a dry steam, no stains. No need to adjust pressure, preset by factory. Two safety values. Made in Canada, easy to service. Replacement parts available. Strong, sturdy construction.

Steamer 2 Gallon Capacity 30-60PSI

JEL3

$1495.00

Suitable for pickling and acid solutions. Note; Use copper, wood or plastic tongs when removing articles from pickling solutions. Using steel tongs will cause the pickling solution to become contaminated, which will oxidize the articles.

57052

Copper Tongs

$9.95

Portable, economical, versatile and safe. Approved for malls. No boiler permits required. Handsfree operation-foot pedal control. Automatic safety valve, quick heat-up time. Powerful 1500 watt heating element. Low noise level. 81/2Wx 12D x 11D. Explosion proof. Boilerless (no holding tank) , High pressure. User friendly, maintenance free. A.S.M.E. and U.L. Approved Made in USA.

The Gem Steam Cleaner GEM1

70C

$795.95

Ionic Cleaners Speed Brite

$795.00

XSteam Counter-top size 3/4 gallon steamer - GEM0363 - $319.95


All purpose cleaning concentrate for metals and plastic. Use hot or cold in ultrasonic or electrocleaning tanks.

Brilliant Spa Personal size steamer - GEM0360 - $79.95

NEW!!!! GemOro Steam Cleaners

Quiet and clean, easy to use on your counter top in store. An ionic process, not ultrasonic. Cleans gold and silver, without removing any metal. Also cleans emeralds, opals, pearls and all other soft or water porous stones safely in one minute. Does not require heat. Perfect for costume jewellery. Made of high-impact plastics. 120V, 60 Hz.

23650 $159.95

12oz.

Speedy Brite

Gem Sparkle Solution 23660 16oz. 23661 32oz.

When using the ionic process use with the Gem Sparkle Solution. A safe non-toxic and powerful cleaner. Will not harm gemstones. A concentrate cleaner comes packaged in a handy measuring bottle. Pink solution, odourless.

$ 14.95 $ 20.95

Tiva Clean - KROHN

454641 1lb. Jar

$18.95

CLN584

Capacity 16oz., mini crock pot stone ware.

Little Dipper Pickle Pot

EZ SAND BLASTER 4800R2 - $595.00 (double hand) 48000 - $549.95 (single hand )

$29.95

ECONOMY JEWELLERY AND SILVER CLEANER


US155 - Silver Cleaner US150 - Jewel Cleaner 8oz US155/24 - Silver Cleaner Case of 24 8oz. $ 3.95 $ 3.95 $69.95 $69.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

US150/24 - Jewel Cleaner Case of 24

Air tight cabinet within which an air jet forces blasting media, either glass beads or aluminum oxide. Resistant to leaks and rust. Media is recirculated. Easy viewing glass. This is a one hand entry blaster. Operates on 60-80 PSI. Compressor not included. Comes with Quartz Abrasive. Larger units available, also available with two hand entry.

www.lacywest.com

65

TUMBLERS & SAND BLASTER, MEDIA


RAYTECH

This popular, low-cost unit is a favorite of the hobbyist and is used commercially as well. Holds 25 ring castings with media or will process about four pounds of rock. Bowl diameter is 8" with new convenient solid lid system. Shipping weight is 7 lbs., 1.05 cu. ft. 115v/60Hz $ 159.95 23001

TV-5 Economical and versatile.

INDUSTRIAL ULTRA-VIBE TUMBLERS IN183 - Removable heavy polyethylene bow with lid. 3qt. capacity and vibrates at 3000VPM.
Mass creates a cyclonic effect, moves around the bowl and down into the center. Ball bearing motor operates on 115 volts. Thermally protected, uses 1.12 Amps. - $299.95 INF183 - Same as IN183 but comes with flow through cleaning system. - $369.95

TUMBLING MEDIA AND COMPOUNDS Looking for a media not listed please call we are a Canadian Distributor for Raytech and 3M.
Green Plastic Pyramids White Plastic Pyramids Dri-Shine 1 treated nutshell Media Type Brown Plastic Pyramids Abrasive Medium Silica use wet Standard cut-down, removes marks Fine Silica use wet Use dry, for final finish. Use dry, for final finish Coarse Alum.Oxide Application Heavy cut down Cycle Time 3-5 hours 3-5 hours Comments Light cutting,prepares surface for polishing 2-4 hours n/a 1st step in normal cut-down. Heavy cut-down and deburring. 2nd step in normal cut-down Weight 5 lb pack 5 lb pack Code # 5 lb pack 4780103 4780109 Price 4780106

3-Way Tumbling Action. Solid Polyvinyl Hexagonal Barrel. Cast Aluminum Chassis. Dupont Nylon Bearing. Fan Cooled, 110v,60Hz Motor This 3-way action is an exclusive feature of this tumbler. Will tumble casting or stones. - 1.Criss cross from side to side 2. Hexagonal shape of barrel forces stones/casting to abrade and change position within mass six times per revolution. 3. The slanted back of barrel moves a portion of the stones/casting gently up and down while rotating. Size 21 L x 9 W x 12 H , Wt. 18lb.

Covington Deluxe Rotary Tumbler $495.95

Time saver in cleaning, deburring, and polishing

IN180 - Removable heavy polyethylene bowl with lid. 1.5 Gallon capacity. Vibrates at 3000 VPM. Mass creates a cyclonic effect, moves around the bowl and down into the center. Motor 115 volts. Thermally protected, uses 1.6amps. Dimensions 11.5 diameter x 12.5 height. $395.95

Removable Heavy Polyethylene Bowl with Lid. 3qt. capacity. Mass creates a cyclonic effect, moves around the bowl and down into the centre. Ball Bearing Motor operates on 115 volts and is overload protected. Vibrates at 3000 VPM. Measures 10 Dia. x 11 high.

ULTRA-VIBE TUMBLER

183 - $299.95

Great for production shop. Heavy-Duty steel barrel, with rubber lining also removable. Use 3 lb. Steel shot. Popular tumbler. Will provide years of service. Motor 115 Volts

HS140 $ 249.95 Rotary Tumbler

Uses 1 lb. steel shot. Watertight molded rubber barrels. Motor 110 Volts. Great for small shop, light weight 6 lb. Will provide outstanding polishing and smoothing. Easy to use and quiet. Can be used for rock tumbling or for metal.

100M $ 109.95 Mini One Barrel Tumbler.

Can use 1 lb. of steel shot per barrel. Versatile allows you to do two steps in tumbling process at the same time. Ideal for small batches whether needing an abrasive for cut down, deburring or the finishing process. Continuous duty, overload protection, Motor 110Volts.Can be used for rock tumbling or for metal

AR2 Two Barrel Tumbler

$ 189.95

$49.95

66

Stainless Steel Shot

Stainless Steel Shot Ball None None

Stainless Steel Shot

Carbon Steel Shot

Carbon Steel Shot

Carbon Steel Shot

Tin Oxide

Ceramic Media (triangles) Aluminum Oxide None None

TUMBLE SOAP

Liquid Super Bright

Liquid Super Bright

#750 Burnishing Powder n/a n/a n/a n/a

#750 Burnishing Powder n/a

#920 Burnishing Powder n/a

Dri-Shine 111 treated corn cob Non-abrasive #920 Burnishing Powder n/a

Non-abrasive rouge

99.5% pure, for general polishing excellent for many materials. Widely used on a tin lap. Used for final polish of stones Burnishing precious metals Burnishing precious metals Burnishing precious metals 3-5 Hrs. 3-5 Hrs. 3-5 Hrs. Pins Balls Mixed Shot

Heaviest media and fastest finisher

Use with all plastic,ceramic,steel media

Use with SS or CS shot

Use with SS or CS shot

For all metals

For all metals

Platinum,white gold & silver

Platinum,white gold & silver

5-15 hours 5-15 hours

n.a

n/a

n/a

n/a

n/a

n/a

n/a

For deburring machined,cast,parts.

removes surface oxides 1 tsp. per pint of water

removes surface oxides

contians rust inhibitor

contains rust inhibitor

2oz to 1 gallon of water

2oz to 1 gallon of water

3rd step in finishing process 3rd step in finishing process

None

None

L A C Y WES T S UPP LIES LTD. 604-669-5229

Burnishing precious metals

Burnishing precious metals

Burnishing precious metals

3-5 Hrs.

3-5 Hrs.

3-5 Hrs.

Pins

Balls

Mixed Shot

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

2 lb box

2 lb pack

2 lb pack

2 lb pack

2 lb pack

2 lb pack

1 lb pack

5 lb pack

1 pint

1 lb pack

1 gallon

1 lb pack

5 lb pack

1 lb pack

5 lb pack

5 lb pack 5 lb pack

TB346/2

TB341/2

TB354/2

TB336/2

470136/2

TB350/2

47516

470128/5

4780114

TM501

TM50

TB32601/1

TB32601/5

TB32701/1

TB32801/5

470107/5 470106

$69.95

$59.95

$59.95

$39.95

$29.95

$22.95

$26.95

$29.95

$11.95

$12.95

$49.95

$6.95

$29.95

$6.95

$29.95

$25.95 $19.95

$39.95

$59.95

MAGNETIC TUMBERS

Quick and Economical Finishing!!! Magnetic Finishing is the most efficient method to burnish and polish small non-ferrous metals. With media as small as .010 in diameter and .250 in length, these stainless steel pins are able to work in areas such as undercuts, recesses, slots, etc, where no previous method has been found suitable. Centrifugal Magnetic Finishing is quiet in comparison to many other forms of finishing. Typically on soft non-ferrous metals, the finishing cycle can be as low as 20 minutes. What is a Centrifugal Magnetic Finisher? The machine is a direct drive, fan cooled design. The magnetic disk is made up of many powerful magnets that are precisely placed in a cast disk. The alternating polarity is constantly changing, thereby allowing the media to move freely in a liquid solution that constantly changes its makeup. Eliminates the need for cyanide bombing and stripping. This, combined with centrifugal force, allows for super quiet and fast time cycles. Tiny steel pins are driven at high speed by powerful rotating magnets at the base of the finishing bowl. Most finishing operations are completed in under 30 minutes. Just place your jewellery pieces, the steel pins, water, and special burnishing compound in the bowl, set the timer, and press ON button. Shuts off automatically. Designed for polishing intricate details, tiny crevices and multiple settings, but not flat surfaces. Features fixed or variable speeds, manual or programmable. Four different models available . All models have see through bowls with a cover for easy loading. Complete instructions included and one 250 gram bottle of Magnetic pins. All programmable finishers have a variable speed control and forward/reverse switch selector. Uses: Stainless Steel Magnetic Pins and Balls. You can mix balls and pins together or use pins by themselves.

Magnetic Tumblers

Magnetic Separating Gun

Magnetic Separating Gun TIMESAVER Easy parts separation at your fingertips for any magnetic tumbler. Magnetic Separating gun can be placed in water to separate the parts. No need to drain water as separator will do the rest. Comes with container. TB080 Large Gun $139.95

Magnetic Stainless Steel Shot Micro Pins TM393 Pins (.3mm) 1lb $139.95 TM395 Pins (.5mm) 1 lb $139.95 TM39350 Pins (.3mm) 1/2 lb $79.95

TB-064 MECHANICAL CAPACITY 12 RINGS $795.95 Smallest capacity Magnetic Finisher has a 4"/ 100mm diameter chamber that finishes the equivalent of 8-12 rings. The machine comes complete with an ample amount of pins and compound. Pin capacity is 100 grams. The TB-064 has a fixed speed complete with mechanical timer and molded bowl & cover. Model TB-064 has 1/32HP motor, 2.0 amps at 115V, 60Hz and 1.0 amps at 230V, 50Hz. Shipping weight is 17 Lbs., 1.0 cu ft. TB-066 DIGITAL PROGRAMMABLE CAPACITY 30 RINGS $1665.00 Model TB-066 is the former Model CMF-600. Designed to integrate programmable functions. Variable speed, forward/reverse. Timer functions are easily programmed to suit your cycle times. The Model TB-066 has a 6"/150mm molded bowl with cover and carries a pin capacity of 200g and a parts equivalent to 20-30 rings. Pins and compound are included. Model TB-066 has a 1/12Hp motor, 2.5 amps at 115V, 60 Hz and 1.25 amps at 230V, 50Hz. Shipping weight is 25 Lbs., 2.13 cu ft. TB-068 DIGITAL PROGRAMMABLE CAPACITY 100 RINGS $1995.00 TB-068 is designed to meet the needs of the larger size manufacturers. The bowl measures 9"/230mm and carries a pin capacity of 400g (purchased separately) and a parts equivalent of 100 rings. The model TB-068 is fully programmable and features variable speed and forward reverse functions. Model TB-068 has a 1/3 HP motor, 4.0 amps at 115V, 60Hz and 2.0 amps at 230V, 50Hz. Shipping weight is 55 Lbs., 5.06 cu ft. TB-070 DIGITAL PROGRAMMABLE CAPACITY 225 RINGS $2495.00 Model CMF-1200 is the largest in the family of Centrifugal Magnetic Finisher. This model features a 12"/300mm diameter bowl and has a pin capacity of 800g. It also carries all the same features and functions as the models 610 & 900. Fully programmable and features variable speed and forward/reverse functions. The CMF-1200 operates at 230V 50Hz/60Hz, 2.0 amps. Shipping weight is 85 Lbs., 9.18 cu ft. TB402 Balls 1.2mm 200g $169.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

www.lacywest.com

67

GM239 - Starrett 3 w/round legs $59.95

35080 - 3Econo $ 5.95 69116 - 3German - $11.95 6911610-4German- $11.95 DIV3312--3 w/replaceable $15.95 tips-GERMAN FLARED DIVIDER 4-$11.95 $11.95 35092 - 6 econo -

DIVIDERS

PRECISION HAND TOOLS


Thumbscrew opens and closes smooth jaws. Handle is hollow to allow long wire to pass through. Overall length is 5".

Thumbscrew Hand Vise 58140

Spiral Hand Drill 28230

$29.95

For use with small wire, sizes 0.750.30mm. Push ring down to turn drill. Spring return makes drilling easier and faster. 4 in length.

52966 $9.95

Double End Steel Tracer 6-1/2

52956 $12.95 52958 $7.95

$11.95

Enables you to accurately scribe cutting lines when reducing sizes. There are 12 sizes graduated in quarter sizes. Fan folds shut. Hardened steel. SCRIBER and Burnisher 7

350705 $45.95 Mark-A-Size

A.
wooden handle.

SCRIBER with knurled chuck, adjustable.

Steel Burnishers wooden handle. 15011 Curved blade 1-1/2 $ 9.95 $ 9.95 18052 Curved blade 2 18060 Straight blade 1-1/2 $ 9.95 $ 8.95 18062 Straight blade 2 $12.95 18064 Straight blade 3

52101 52100 52103

Steel Scrapers

Economy A. Quality 2-1/2 blade Quality 3 blade

$ 9.95 $12.95 $13.95

52950 Waller Scriber Pen With refillable carbide tips. Reversible ends for carrying. Carbide Tipped Scriber 52952 Can be used on the hardest of metals, glass, ceramics, etc. Diamond Tipped Scriber 52954

$ 6.95 $14.95

$ 5.95

Vice mounted on wood handle, tightens with thumbscrew. Can hold virtually any size and shape settings.

SETTERS HOLD IT TOOL


Settholdit

$ 99.95 6496

Unique tungsten steel alloy withstands temperatures up to 3000C for 5-10 minutes. Handles protected by insulating sleeves of heat resistant rubber. Straight 145mm. Perfect for working with Platinum! TW201 - $69.95

CYBER-THERM TWEEZERS

Diamond Tip Scriber SCB43200 $11.95 The handle is shaped to prevent rolling off of your bench. Economy Scriber 1130 $9.95 Hardened steel for all precious metals.
Double End Steel Tracer 4-1/2

52966 TRACER

$14.95

Bergeon Bracelet Cutter $199.95

BRACELET HOLDER $69.95


Great for Tennis bracelets. Adjusts to 7mm wide. 3 1/2 diameter, comes with a hex

46582 Heavy Duty Side Cutters / Sprue Cutter. Multi-leverage with return spring in handles. Heavy-duty type cuts up to 1/4 rods. Cutting edge 3/4 long, overall 8.

wrench. Setters can do prong, pave, and channel settings.

PJ841-Bergeon Sprue Cutter-$169.95

BROWN SHEARS For cutting sheet solder. Made in Germany.

cuts 1.6mm sheet or 10mm round stock of mild steel with minimal distortion of the metal. Four-sided reversible blades, made of high carbon steel, tempered to perfection. Blades can easily be adjusted and reversed. Shears must be bolted to sturdy surface. Quality precision tooling. P19660 Blade length: 6 $429.95 P19680 Blade length: 8 $499.95

Bench Shears

Prong Lifter

HO302 - $34.95

68

53830 Left hand $19.95 53832 Right hand $19.95 Important: Left handers should order right-hand type. Left-hand type lets a right hander see what is being cut off without obstruction of overlapping blade. Blades 1-1/2. Overall length 6.

L A C Y WE ST SUP PLIES LTD. 604-669-5229

Rings are positioned precisely in non marring jigs and impressions can be controlled with a smooth acting hand lever. PU001 - $495.00

RING STAMPING MACHING

Made of hardened steel. A prong lifter, pusher EuroTool Best Quality. HEAVYDUTY 4-3/4

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

53144 $11.95

TWEEZERS
Cross Lock , Reverse Action Nickel-Plated Steel 57752 GRADE AAA $ 8.95
Sharp , Serrated 6 1/2 Size XFine(0.4mm) Fine(0.6mm) Med.(0.9mm) Large(1.2mm) XLarge(1.8mm)

SWISS DIAMOND TWEEZERS ($24.95-$31.95


Matt Finish Reg. Lock TW904 TW901 TW918 TW902 TW917 TW903 TW916 TW907 TW919 Matt Grooved Reg. Lock TW906 TW910 TW905 TW911 TW908 TW912 TW909 Starlight Diamond TW935 TW936 TW937 TW938 TW837

57753 GRADE AAA $ 8.95

Cross Lock , Reverse Action Nickel-Plated Steel

Blunt ,Serrated 6 1/2

Size Med.(0.9mm) Large(1.2mm) XLarge(1.8mm) XXLarge(2.4mm) Size XFine(0.4mm) Fine(0.6mm) Med.(0.9mm) Large(1.2mm) XLarge(1.8mm)

57760 Fibre Grips $2.95 Cross Lock , Reverse Action Stainless Steel

EACH) Black Finish Reg. Lock TW924 TW921 TW928 TW922 TW927 TW923 TW926 TW925 TW92601 Black Grooved Reg. Lock TW929 TW931 TW930 TW932 TW93001 TW93002 Starlight Starlight Diamond Lock Titanium TW870 TW838 TW871 TW839 TW872 TW840 TW873

Sharp , Smooth - 6 1/2

Cross Lock , Reverse Action Stainless Steel

57761 Fibre Grips $2.95

Head & Shank Tweezers For soldering solitaires quickly with ease.
Curved , Smooth - 6 1/2

95

$ 9.95

51/2

57713 $ 4.95

AA GRADE AAA Non- Magnetic $4.95 AA Utility Tweezers Tapered with beveled edges - 5

Soldering-Utility Nickel-Plated Steel - 6-3/4

Pointed tips

94

$ 4.95

Square Serrated

GG Utility Tweezers

GG GRADE AAA Non- Magnetic $4.95

HOL65400 $6.95 65400 Four Prong Holder 4-3/4L

57636 Small Holder

57636 $ 6.95

2 L

Pointed , indented shanks - 5

132 - Pearl Tweezers - $9.95 1172 $ 9.95

MM GRADE AAA Non- Magnetic $2.95 MM Utility Tweezers Simular to AA , but heavier

OO GRADE AAA Non- Magnetic $4.95 OO Utility Tweezers Shorter version of MM

Coated Forceps Plastic coating , Nickel-Plated - 10 57717 $7.95

Soldering-Utility (Long) Nickel-Plated Steel , Serrated - 6-3/4 57052 $ 9.95

RR GRADE AAA Non- Magnetic $4.95 RR Utility Tweezers Heavy Duty , wide shanks , Nickel-Plated Steel

GRADE AAA - Heavy Duty Tweezers

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

Copper Tongs

Suitable for pickling and acid solutions. - 8-1/2

www.lacywest.com

69

SCALES & GOLD TESTERS

POCKET SCALE 55g x 0.01g Battery operated, hand held design. Backlit touchscreen display. Weighs in G, OZ, CT and GN. Compact size. 10 year warranty. 2 x AAA batteries (included). Made in China. AMW55 - $49.95

US BALANCE DIGITAL POCKET SCALE


300g x 0.1g capacity Weighing modes: G, OZ, DWT, GN Backlit LCD Auto power shut off 3 x AAA batteries included. 5 year warranty

100 Carats / 0.01ct

Sleek pocket size design features push button calibration. Includes calibration weight, stone scoop, and carrying case. High accuracy of 0.01ct/Cap. 50ct. Tare weight function. Auto power off. Selection of weight modes (ct, t.oz, grain, g). (Carat 100 ct/0.01ct) (Troy 0.32 t.oz/0.0001 t.oz)(Grain 154 grain/0.05 grain) (Gram 10g/0.002 g) 6 X LR03 AAA cells included. Made in Japan. One-Year Warranty.

TANITA DIAMOND MASTER

USY300 - $19.95

40140 Gemstone Scale 100C 40120 Gemstone Scale 50C

M24 M24

Slim pocket scale, weighs 100 grams maximum. Batteries and carrying pouch included. 120 g x 0.1, .02g. Auto shut-off. Tare function. Low-battery and weight-overload indicators. Uses three LR44 batteries (included). Two -year warranty. Made in Japan. JEWELERS FAVORITE POCKET GOLD SCALE

TANITA POCKET SCALE 120g

$395.00 $379.95

Is the latest innovation of Carat weighing technology. Most advanced semiconductors to enchance the accuracy and stability of the scales for long and continuous operation. 100CT X 0.01 Carats Modes: gram/carat/ ozt/ grain. 4x AAA batteries or AC 120/230 V adaptor. AUTO- SHUT DOWN

PRESIDIUM CARAT SCALE

Capacity: 400g x 0.1g Weighs in grams and Ounces. One AA battery (included). Calibration weight and weight-tray included.

ACCULAB POCKET PRO V1400 - $149.95

PCS100

DIGITAL POCKET SCALE

$395.00

1479V

Electronic Gold Tester by MIZAR

Auto shut-off function, LED display Low battery indicator function Battery operated, fully portable Automatically determines 9K, 10K, 12K,14K,16K,18K,20K,22K,24K,SS and platinum.

$ 275.95

$89.95

Legal for trade. Call for current pricing and availability.

METTLER SCALES

250 Gram Capacity X 0.1G Battery operated, hand held design. Protective lid protects balance. Key calibration. Four weighing modes -Gram, Oz, DWT, GN, Batteries included. Backlit LCD. High impact plastics, black colour. MADE IN CHINA

AMW250

$29.95

Replacement Gold Testing Chemicals - 1995 $ 39.95


TES80800 10k 14k 18k 22k Silver 56805 1435 99830 1120B

GOLD TESTING ACID


3 Bottle Kit 10K Test Acid 14K Test Acid 18K Test Acid 22K Test Acid Silver Test Acid Platinum Test Acid Test Stone Test Needle (5 Tips) Test Needle (4 Tips)

1000 g x 0.1g Large stainless steel platform. Displays Grams, Ounces, Troy ounces and Pennyweights. 9- Volt battery (included) optional AC-Adapter (sold seperate). AMW1000 - $119.95 $ $ $ $ $ $ $ $ $ $ 69.95 4.50 4.50 4.50 4.50 4.50 6.50 7.95 59.95 29.95

PRECISION BENCH SCALE

70

LA C Y WEST SUP PL IES LTD. 604-669-5229

Kit comes with case, needles, stone and 3 acids. Case, stone, and needles also sold separately Acids pre-mixed. No mess. Sold in plastic bottles. 15100 Glass bottle $1.95

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

D I S P L AY
908 905 903 ARCH CROWN

Sharkskin Tags For jewelry repair and identification tags. Self-stick tags, free marking pen. Code Color Qty. Size 60701 White 1000 Small 60708 Gold 1000 Small 1000 Small 60704 Silver 60702 Blue 1000 Small 60703 Yellow 1000 Small 60715 White 500 Large 60716 Blue 500 Large 60717 Yellow 500 Large

Plastic and Parchment String Tags Box of 1000 Tags ARCH CROWN Plastic - gold, silver, frosted, white $64.95 Parchment tags available in white only. $59.95 String Tags package of 100 $ 8.95 61720 1000 Tags

907

TRAVEL SALES CASE Aluminum frame with roll wheels and handle Key lock, side open.16-1/4x9-1/4W x 13.5W
8617 - $99.95

WE ARE DISTRIBUTORS FOR ARCH CROWN TAGS AND BAR CODE SYSTEMS.

$9.95 (1 pkg)

Economy Purple String Tag White Parchment Box of 1000 parchment tags: $19.95 New Computer Tags for Chains

$10.95

Box of 1000. Available in colors of Gold, Silver, Frosted, White Specify small ring or large ring tags. Quality Ring Tags

702 - $69.95 721 - $75.95 Plastic Button Ring Tags

702

721

91B B912 A912 91C

Soft Sales Case


13.5 H, Grey/Vinyl 13.5 H, Black 19H, Black 16H, Black

Carrying sales case holds display trays. Strong but lightweight, zipper to open from side with velcro fasteners.

$29.95 $39.95 $44.95 $44.95

Leatherette Sales Case

Silver EN127 99964 99967 99965

PAPER GIFT BAGS WITH ROSE DESIGN


Gold EN117 99963 99966 99965 Size 4x6" 5x7" 6x9" 8.5x11"

COLOUR Yellow White White

JEWELLERY U-PINS
QTY. 1000

1000 $24.95 $29.95 $49.95 $59.95

100 $ 4.95 $ 5.95 $ 9.95 $13.95

DISPLAY TRAYS
1 - $3.95 Large 1.5 - $4.25 Large 2 - $4.50 Large 1 - $2.95 Small

S811 - Black Large S812 - Brown Large BX427 - Black Small

Case holds chains,rings, earrings, and display pad. Black interior. With combo lock.

$79.95 $79.95 $39.95

1000s $59.95 100s $8.95 Triple Duty Repair Envelopes


Has two detachable stubs. Order in packs of 100 or box of 1000. CODE # SERIES 61151 1 to 1,000 61152 1,001 to 2,000 61153 2,001 to 3,000 61154 3,001 to 4,000 61155 4,001 to 5,000 61156 5,001 to 6,000 61157 6,001 to 7,000 61158 7,001 to 8,000 61159 8,001 to 9,000 61160 9,001 to 10,000

For pinning jewellery to displays. 100

GEM JARS

Cartier Style Red leatherette/ Black leatherette BT1 $15.95 Gem Boxes #1305 $1.50 each White or black

Gemstone Display Box

TRAYS WITH GLASS TOPS LIDS

Yellow

100

1000

$2.95

$9.95

$2.95

PRICE $9.95

Black or White. Stackable trays (14" x 8 ") Large - 14 x 8 Small - 8 x 7

Available in

Plain Coin Envelopes

EN36 5 1/2 x 3 1/8 Kraft 500 $29.95 100s: $5.95

C841 C831 C832

8x7x2 small 14x8x2 med. 14x8x2 3/4

Black Leatherette Pads to fit available

$11.95 $17.95 $19.95

Fits into display trays Specify colour when ordering: BLACK, BURGUNDY, NAVY, WHITE or GREY. HOLDS 72 $2.95 HOLDS

FOAM RING PADS

783 Compartment Box

Small 1-1/8- $1.00ea Large 1-3/4- $1.50ea Suede Chain, Ring and Combination Rolls Call for available colours

36

$1.95

Plastic Box with 18 compartments. Clear plastic lid.

$8.95

LT832 -24lrg jars/black - $22.95 LT832 -24lrg jars/white - $22.95

GEM JARS WITH FOAM PADS 99706 -50sm jars/black - $26.95 99707 -50sm jars/white - $26.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

NECK BUSTS, RING TRAYS, BRACELET AND EARRING DISPLAYS AND BOXES.

Plastic Tray Liners for standard 1 Tray with compartments available.

Colours: Blue, Black, Burgundy, White & Grey. (Fits stacking display trays)

Full Velvet Pad - $4.95 Half Velvet Pad - $2.95

Plastic Compartment Box


Code 15140 15139 15137 15136 Sections
18 18LARGE 12

$ 8.95 $11.95 $ 8.95 $ 3.95

Price

www.lacywest.com

71

Sales Case Aluminum Glass Top with Lock

D I S P L AY

AL819 - 34W x 22D x 3 H - $119.95 AL813 - 24W x 20D x 3 H - $99.95

22 32

NESTED BOXES -HIGH QUALITYCotton-filled boxes available in a variety of colors to suit all needs. Sold in cartons of 100. BOX# Colour PRICE/100 SIZE 21 Krome $29.95 2-1/2 x 1-1/2 x 7/8 Cocoa $34.95 Blk Pinstripe $34.95 Gold Linen $32.95 Green $34.95 Navy $34.95 Silver Linen $32.95 White Swirl $29.95 Single $0.50 each
White swirl Gold Linen Single $29.95 1-7/8 x 1-7/8 x 7/8 $32.95 $0.50 each

8603 12 TRAYS $49.95 Holds 12, 1 inch trays.

Single ring Large ring Small earring Large earring Small pendant, Flat pad Large pendant, flat pad Bracelet box Small pendant, raised pad Bangle box Large pendant, raised pad Small broach box Large broach box Small pearl box Large pearl box Available with gold trim. Call for available colours

Velvet Boxes

Black Leatherette Sales Case with combination lock Folds out to hold Trays 1 or 1-1/2 or 2 inch in height. - Single ring - Double ring - Earring - Small Pendant - Large pendant Bracelet - Necklace box Available in Black, Grey and White DOUBLE T-BAR Black Leatherette. LB218 White Leatherette. LW218 SINGLE T-BAR Black Leatherette. LB219 large SB219 small White Leatherette LW219 small SW219 large TRIPLE T-BAR

CUT CORNER BOXES

33

53 65 82

85

72

78 Assortment Case - includes: 12 - #11, 18 - #21, 12 - #32,12 - #33, 12 - #53, 12 - #82 Silver Linen $45.95 Gold Linen $45.95 Blk Pinstripe $45.95 White Swirl $44.95

Blk Pinstripe $64.95 /50 8 x 5-1/2 x 2 White Swirl $59.95/50 Single $1.50 each

Blk Pinstripe Gold Linen Green Navy Silver Linen White Swirl Single

Krome White Swirl Single

White Swirl Single

Krome Cocoa Blk Pinstripe Gold Linen Green Navy Silver Linen White Swirl Single

Krome Cocoa Blk Pinstripe Gold Linen Green Navy Silver Linen White Swirl Single

$49.95 8 x 2 x 7/8 $45.95 $49.95 $49.95 $45.95 $41.95 $0.70 each

$54.95/50 $54.95/50 $1.30 each

$59.95 5-1/4 x 3-3/4 x 7/8 $0.80 each

$41.95 3-1/2 x 3-1/2 x 1 $47.95 $47.95 $44.95 $47.95 $47.95 $44.95 $41.95 $0.60 each

$33.95 3-1/16 x 2-1/8 x 1 $38.95 $38.95 $35.95 $38.95 $34.95 $35.95 $33.95 $0.60 each

$24.95

$24.95

Single Ring Ear Stud Box Pendant Box Bracelet Box Pearl Box Colours: Red and Black. Please specify with snap or without.

Cartier Style Boxes

$18.95 $12.95 $18.95 $12.95

White Leatherette LW216

Black Leatherette. LB216

$29.95 $29.95

COLOURFUL HAT BOXES Carton of 48 Round, Square, Octagonal, Heart shaped boxes 1-3/4x1-3/4x 1-1/2. Metallic $19.95 Regular $18.95 Ring Stand Displays Acrylic Square shape Displays single ring. Set of six different stand sizes. 1318 EARRING ACRYLIC STAND 3 PCS STANDS 2.25x3.5H 6x2.5H, 6x5H.

ACRYLIC T-BAR STANDS 1330 double - $15.95 1329 single - $9.95

$12.95

1325 hexagon shape - $11.95 ACRYLIC EARING DISPLAY -Set of 3 stands1401 - $5.95

1402

ACRYLIC EARING DISPLAY -Set of 4 stands1407 - $11.95

L A C Y WES T S UPP LIES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

ACRYLIC EARING T-BAR -Holds 14 pairs of earings1609 - $7.95

Earring Acrylic Ramp holds 5 pairs. 6Lx1.75H 1404 $2.95

$11.95

Silk on Card

Nylon on Card

BEADING SUPPLIES
Silk/Nylon on Spool Tiger Tail Wire Beading Tips

COLOURS: Amber, Amethyst, Aqua, Baby Blue, Beige, Black, Blue Brown, Coral, Garnet, Green, Grey, Gold, Jade, Lilac, Pink, Purple, Red, Turquoise, White, Yellow. #2 #3 #4 #5 #6 #7 #8 SIZES: (0.45mm) (0.50mm) (0.60mm) (0.65mm) (0.70mm) (0.75mm) (0.80mm)

- 72 INCHES OF CORD WITH NEEDLE -

BEAD CORD ON CARD

Code 380751 38076 38077 380781 38079 380792 380811 38081 38078 38082 38083

SILK ON SPOOLS
Size B D E F 2F 3F D E F 2F 3F Colour White White White White White White Black Black Black Black Black

SILK - $2.95 EACH NYLON - $2.00 EACH

Also available in colours: Grey, Brown, Blue, Royal Blue, Green, Red, Jade Green, Navy, Violet, Amethyst Purple.

Grade Extra fine Fine Med.Fine Medium Med.Heavy Heavy Fine Med.Fine Medium Med.Heavy Heavy

Stainless steel twisted wire coated with nylon. Use for knotting heavy stones. Fine (.012) 38326 38327 Medium (.018) 38328 Heavy (.020) $4.95 each

Tiger Tails

Crimps

Steel Wire Beading Needles


380910 38315 38316 38317 extra fine fine medium large

$7.95 $7.95 $8.95 $8.95

50 needles per package.

STRETCH MAGIC BEAD CORD


SMJ0501 - 1.0mm Clear - $4.95 SMJ0503 - 1.0mm Black - $4.95 SMF0501 - 0.7mm Clear - $4.95

Clear and colourless, will not shrink and is unaffected by water, oil, or gasoline. Clear permanent bond. Net 1 fl.oz. 330 $6.95 220 $5.95

Jewellers Epoxy

Diamond Bead Reamer Set

SF014 .014

SF019 .019

Knot Tying, Stainless Steel, Nylon Coated

Soft Flex Wire

$10.95

$13.95

Sorting Trays with Grooves


772 - Plastic with holes 10cm 744 - Plastic with holes 16cm 788 - Plastic Lrg Multi-Strand

$ 4.95 $ 8.95 $14.95

NYLON COATED MINI WIRE CABLE

ACCULON

TT2030 - Silver - $6.95 TT1530 - Regular - $5.95 Instant Adhesive Gel

High performance cyanocrylate bonds metals, woods, ceramics, rubber, and most plastics. 12214 3g $2.95 Coiled wire for stringing. Yellow or White . Necklaces looks prettier if bead cord is covered with french wire at both ends, between the last pearl and clasp. Specify: Fine, Medium, Large. $6.95 - EACH

FRENCH WIRE

SIZE 1.5x2 2x2 2x2 2x3 2x3 3x4 3x4 6x4 6x4 5x7 5x7 6x9 6x9 8x2 8x10

Sold in bags of 100, or box of 1000 bags. White patch or plain. STYLE
PLAIN PLAIN PLAIN PLAIN PLAIN PLAIN PLAIN PLAIN PLAIN

ZIP LOCK BAGS


100S $1.00 $1.25 $1.50 $1.50 $2.00 $2.00 $2.50 $3.00 $3.50 $4.50 $5.00 $5.95 $6.95 $4.95 $7.95 ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea

Set: Handle Holder with comfort grip, 3 diamond burrs- cone,small point, large reaming point. 15181 $12.95

Crystal Cement

Excellent bond for plastics and a favorite for securing cord knots. 1 oz. tubes. 10500 $6.95 Bead Stringing Kit Board Tri-Cord knotter (3801910) , white build into silk thread 400 yards of size E. Carrying Tube of glue, thread snips, chain Case nose pliers, Video (6301513) 30 stainless steel beading needles of assorted sizes, 40 Bead tips G.P. & S.P., french wire in Sterling silver & ygf.

Tri-Cord Bead

patch patch patch patch patch patch

1000S $ 8.95 $ 8.95 $ 9.95 $10.95 $11.95 $13.95 $16.95 $23.95 $25.95 $39.95 $39.95 $49.95 $49.95 $39.95 $49.95

A low cost tool that allows you to form smooth unobtrusive crimps. Eliminates the unsightly sharp edged crimps.Works well with tube crimp or round crimps.

Bead Crimping Pliers

3801900 3801910

(tool only)

$165.95 $69.95

Attack

CRIMPING BEADS PACK OF 50 Sterling Silver - 11006 - $5.95 Yellow-Gold filled - 11005 - $5.95 Awl
38330 Use to slide knots & clean holes. $4.95

PLR46910 - $29.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

Dissolves cured epoxy and polyester resins. 8-fl. oz. can. Use on glass, metal, stone, wood. 38325 $12.95

Micro Snips

Used for cutting cord and snipping knotted strands before restringing. Length 4. 46555 $4.95

www.lacywest.com

73

ENAMEL COLOURS

IS A L OW T EMPERATURE C URING E NAMEL Ceramit enamels hardness is 65-70 on the Sward scale. Can also be used as a protective coating. Cured in 30 to 45 minutes at 250F in a temperature controlled oven. Curing in just a few hours with the use of a portable electric heater or infrared lamp. Curing at room temperature (70F) achieved within 24 to 48 hours. May be applied to any porous surface (metal,glass,plastic,wood,rock) by brush,spray gun, squeeze-bottle, syringe, or spatula, resulting in an extraordinary finish. Imparts an extremely glossy surface which may be buffed, stoned, or polished in order to obtain a desired affect. Non-conductive, Surfaces enameled may be electroplated without affecting the color or finish. Two-Part System: Part A (color) and Part B (catalyst). Easy-to-follow instructions.

CERAMITATION

OPAQUE Black Lamp Black White Iridescent Pink Chinese Red Red Violet Brown Cocoa Brown Burnt Umber Orange Yellow Buttercup Yellow Olive Green Jade Green Green Masonic Blue Sky Blue Turquoise Israeli Blue Blue TRANSPARENT Red Violet Brown Orange Yellow Green Blue Clear FLUORESCENT Red Green Blue Orange Pink Yellow Chartreuse METALLIC Gold Silver Copper

C E R A M I TAT I O N - E N A M E L I N G - J A X
$6.95 TO $9.95 EACH
2-fluid oz. bottle

Ceramit Set 45800

Catalyst and 14 colours, 1/2ounce bottles. An excellent starter kit gives good range of colours. Easy to use.

Brushes for painting enamels. $1.95 - 2.95ea

$89.95

All JAX metal finishing and polishing solutions are easy to use, produce authentic, consistent results, require no heat or electricity, are water-based, contain no sulfur, are non-flammable and react within seconds. Larger sizes of any JAX solution are also available. JAX GREEN PATINA Produces a permanent, authentic, antique green finish on copper, brass, and bronze. 45900 Pint $15.95 45940 Gallon $54.95

JAX MASTER METAL FINISHING SOLUTIONS

45880 45881 45884

Part B Catalyst Part B Catalyst Thinner

8 oz. can. 16 oz. can. 16 oz. can.

JAX FLEMISH GREY/BLACK Produces an antique Flemish, grey-black finish on brass, bronze, and copper. 45905 Pint $15.95 45965 Gallon $54.95

$12.95 $22.95 $23.95

Fine quality tissue, free 61051 7-3/8 x 1100 61052 20 x 720 61053 20 x 30

Anti-tarnish Paper

JAX INSTANT SILVER CLEANER A heavy-duty cleaner that removes tarnish and oxidation from the blackest silver. 45914 Pint $14.95 45954 Gallon $47.95

of lint. Roll Roll 480 Sheets

3lbs. $14.95 7lbs. $34.95 8lbs. $34.95

JAX COLORANTS

JAX BLACKENERS

JAX SILVER BLACKENER Produces a dark, black antique finish on silver and gold. 45906 Pint $15.95 45946 Gallon $69.95

JAX SILVER CLEANER and POLISH Cleans and polishes the blackest silver in one application without harming the most delicate surface. 45918 Pint $14.95 JAX METAL CLEANER POLISH Cleans and polishes tarnished brass, bronze, copper, pewter, nickel, and steel. Removes oxidation, surface dirt, oil, and fingerprints. 45919 Pint $14.95

JAX MASTER METAL CLEANING SOLUTIONS

JAX GOLD FINISH Produces a simulated 24 K Hamilton finish on brass. 45901 Pint $17.95 45941 Gallon $54.95 JAX ANTIQUE RUST Produces an antique rust finish on iron and steel. 45960 Pint $14.95 45961 Quart $21.95 45962 Gallon $49.95

JAX BROWN/BLACK Produces an antique brown/black finish on brass bronze, and copper. 45903 Pint $15.95

JAX BROWN Produces an antique rust finish on brass, bronze, and copper. 45902 Pint $15.95 45942 Gallon $54.95

JAX DARKENERS

JAX ALUMINUM BLACKENER Produces an antique black finish on aluminum. 45967 Pint $16.95 45968 Gallon $64.95

JAX IRON, STEEL, and NICKEL BLACKENER Produces an antique, metallic black finish in seconds on iron, steel, cast iron, and nickel. 45908 Pint $15.95 45966 Gallon $54.95

JAX PEWTER BLACKENER Produces a dark, black antique finish on pewter, lead, brass, bronze, copper, nickel, tin-lead alloys, and solder. 45907 Pint $15.95 45947 Gallon $59.95

JAX BLACK Produces an antique black finish on brass, bronze, and copper. 45904 Pint $15.95 45944 Gallon $44.95

JAX TARNISH PREVENTER Prevents tarnish on clean brass, bronze, and copper. 45913 Pint $12.95

JAX LACQUER REMOVER Removes lacquer and paint from metal surfaces. Contains no solvents. 45972 Pint $12.95 45973 Gallon $45.95

JAX MASTER METAL CLEANING SOLUTIONS

47457 47458

FLITZ METAL POLISH Cleans, polishes and protects. Acid free, nontoxic, non-abrasive paste rubs on and wipes off. Protects up to 6 months. Concentrate so a little goes a long way. For use on gold, silver, brass, platinum, chrome, copper and marble. Safe for heavy plated work. Sold in squeeze tube. 50 Grams 150 Grams $15.95 $29.95

C-CLEAR PLASTIC RENEWER Watch crystal repair polishing compound. 47310 1/4 Lb $3.95

74

L A C Y WE ST SUP PLIES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 -4 11 8

HAGERTY CLEANING PRODUCTS


Silver Clean Just dip and rinse. Excellent for sterling and silverplate, comes with a Handy Dip Basket and Brush. 24060 - $6.00 207 ml Jar Pearl Clean Ideal for restoring luster to all natural and cultured pearls. 25060 - $5.75 168 ml Jar Silver Care Wash and Rinse foam paste. Tarnish Resistant 12070 - $8.95 226 g Jar 12170 - $13.95 482g Jar 12070/12 - $79.20 Case 12 x 226g 12170/12 - $140.08 Case 12 x 482g

16060 6 oz. Jar 16060/12 Case of 12 Jars

Jewel Clean The easy way to give your diamonds, gold, platinum and precious gems that showcase sparkle. Each jar comes with a Handy Dip Basket and brush. $ 5.75 $46.85

24060/12 - $48.85 Case of 12

25060/12 - $44.45 Case of 12

Tarnish resistor 19111 - $75.95 19x12x2.5


EACH

Silverware

Drawer Blue Liners for

Silver Foam

Foam paste ideal for sterling, silverplate and gold. 11070 - $5.95 226 ml Jar.

Copper & Brass Polish A liquid polish with a tarnish preventive . Rub on and buff clean. 20120 - 340 ml Bottle $13.00

Dry Silver Polish Spray To be used with Silversmiths Gloves. After washing gloves, spray with Dry Spray Polish to restore the cleaning properties. 15110/12 $78.25 Case of 12 cans 15110 - $9.75 1.25 oz. can

Case of 12

11070/12 - $56.80

20120/12 Case of 12 Bottles $119.60

Silversmiths Spray Polish Spray, let dry and wipe clean. Removes tarnish & leaves a tarnish-resistant barrier. 14200 $18.50 400g. can 14200/12 $153.30 Case of 12 cans.

Silversmiths Gloves Use gloves to clean, polish, and protect your silver: leaves a tarnishresistant barrier. Gloves are washable. After washing, use Dry Silver Polish to restore cleaning properties. 15010 One Pair of Gloves $17.50 15010/12 One Dz. Pairs $149.50

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

Flatware Silver Dip Quick and easy way to clean and remove tarnish from sterling or silverplated flatware. Includes handy dip basket . 50000 $13.95 600 ml Jar . 50000/12 $138.90 Case of 12 Jars

Silver Protection Strips The best way to keep silver tarnish-free.Simply put strips in storage or display area and they will retard tarnish for six months. 70000 - $9.95 One package 70000/24 - $159.95 Case [24 packages]

www.lacywest.com

75

TUBING - WIRE - SHEET - ALLOYS


ROUND WIRE STERLING SILVER
PRICED PER GRAM

PRECIOUS METALS SOLD BY WEIGHT PRICED PER GRAM


PLEASE CALL FOR CURRENT PRICING

0.50mm 0.80mm 1.00mm 1.25mm 1.50mm 1.75mm 2.00mm

0.60mm 0.80mm 1.00mm 1.25mm

1.30mm 1.40mm 1.50mm 1.60mm

Diameter: (round)
6

SEAMLESS TUBING STERLING SILVER


OR

ROLLING ALLOYS #730 Medium Yellow 18k Rolling Alloy #820 Yellow 10k - 14k Rolling Alloy #850 Yellow Standard 10k - 14k Rolling Alloy #860 Nickel White 10k - 14k Rolling Alloy #880 White 14k - 18k Rolling Alloy

#200 Bright Yellow Casting Alloy #490 Medium Yellow 10k - 14k Casting Alloy #720 Rich Yellow 18k All Purpose Alloy #740 Yellow 18k All Purpose Alloy #500 White 18k Casting Alloy #910 White 10k - 14k Casting Alloy #940 White 10k - 14k Casting Alloy Italian White Alloy 10k - 18k All Purpose Alloy

CASTING ALLOYS

ALLOYS FOR GOLD & SILVER CASTING SOLD BY THE OUNCE


STERLING SILVER

2.00mm 2.50mm 3.00mm 3.50mm

12

INCREMENTS

STERLING FLAT SHEET SHEET SIZE 4 X 4 OR 4 X 6


GAUGE

4.00mm 4.50mm 5.00mm

12 14 16 18 20 22

MM

2.00 1.63 1.29 1.02 0.81 0.64

4x4

STAGCG Standard Sterling Silver Casting Grain SG57 Sterling Silver Casting Grain All Purpose Tarnish Resistant S88 Sterling All Purpose Tarnish Resistant Alloy

SOLDER ALLOY

#99 Alloy Replenisher De-Ox Gold 10-14K De-Ox Replenisher for Yellow Gold - Easy Alloy - Medium Alloy - Hard Alloy

43013031 - COLUMBIAN GOLD - Yellow bronze metal, softer in colour than rich gold. Melts at 982C $22.95 (1 Lbs) 43013051- ENGLISH GOLD - Light rose color shaded towards brown. extremely hard and retains a high polish. Melting temperature is 1093C $22.95 (1 Lbs.) - White copper alloy is close to sterling in colour, but has advantage of being considerably harder. 43013071 - SILVER MINE Retains high polish and melts at about 843C $29.95 (1 Lbs.) - Lead free and melts at 232C $32.95 (1 Lbs.) 4301317 - PEWTER

NON-PRECIOUS CASTING METALS - Sold in shot, can be oxidized, antiqued or plated. Metals are tarnish resistant and will not dis colour when heated. Can be soldered with gold or silver solder.

#330 Brass for Samples Casting Grain #342 Casting Bronze Casting Grain

GAUGE:
BRASS COPPER DIXGOLD NICKEL SILVER

76

LA C Y WEST SUP PL IES LTD. 604-669-5229

16 43400 43420 -------43460

SOFT METAL IN 12 x 12 SHEETS (Nickel Silver 6 x 12)


18 43401 43421 43441 43461 20 43402 43422 43442 43462 22 43403 43423 ---------------

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

24 -------43424 ---------------

26 -------43425 ---------------

SOLDER AND ACCESSORIES


REPAIR GOLD SOLDER TYPE FLOW TEMP. 6 Y EASY 1345F 6 W EASY 1390F 8 Y EASY 1350F 10 Y EASY 1340F 10 Y MEDIUM 1395F 10 Y HARD 1475F 10 W EASY 1365F 10 W MEDIUM 1425F 10 W HARD 1550F 14 Y X-EASY 1295F 1395F PLEASE CALL FOR 14 Y EASY CURRENT PRICING. 14 Y MEDIUM 1440F 14 Y HARD 1570F

Cadmium Free Solder Gold Solder - 2 Gram Sheet


TYPE 14 W EASY 14 W MEDIUM 14 W HARD 18 Y EASY 18 Y MEDIUM 18 Y HARD 18 W EASY 18 W MEDIUM 18 W HARD 20W WELD

PLUMB GOLD SOLDER FLOW TEMP. TYPE FLOW TEMP 1380F 10KYP XEASY 1305F 1440F 10KYP EASY 1375F 1570F 10KYP MEDIUM 1400F 1425F 10KYP HARD 1475F 1495F 10KWP EASY 1390F 1535F 10KWP MEDIUM 1435F 1465F 10KWP HARD 1570F 1495F 10KP PINK 1550F 1590F 12KYP EASY 1410F 1610F 12KWP EASY 1425F 14KYP XEASY 1295F 14KYP EASY 1340F

Cadmium-Free, may also be used for palladium.

TYPE EASY MEDIUM HARD

PLATINUM SOLDERS - 1.6 Gram SHEET


MELT 1100 1200 1300 FLOW 2012 2192 2372

GRIFFITH INSTACLEAN TARNISH REMOVER 23032 16 Oz. $5.95 23033 32 Oz. $7.95 23034 1 GAL. $14.95

High strength silver bearing solder melts and flows at 430F. 54452 Staybrite Kit $16.95 1/2 oz.solder and 1/2 oz. flux. 54455 Staybrite Flux $17.95 32 oz. No need to pickle.

STAYBRITE SOLDER

EASY MEDIUM HARD

TYPE

SILVER SOLDER - 5 Gram SHEET


Cadmium Free MELT 1235 1265 1370

FLOW 1260 1295 1490

PASTE SOLDER in a syringe


GOLD GOLD GOLD 14KTY 18KTY 10KTY EASY EASY EASY

54808 54462 Tix Flux

TIX SOLDER Hardest soft solder, flows at 275F. Adheres to most materials. Stays white, does not tarnish.

TYPE FLOW TEMP 14KYP MEDIUM 1390F 14KYP HARD 1480F 14KWP XEASY 1320F 14KWP EASY 1390F 14KWP MEDIUM 1450F 14KWP HARD 1570F 14KP PINK 1560F 18KYP EASY 1430F 18KYP MEDIUM 1475F 18KYP HARD 1550F 18KWP EASY 1460F 18KWP HARD 1610F 18KP PINK 1600F 19KWP WELD 1685F

(1.555 DWT.= 1GM )

1 DWT 1 DWT

1 DWT.

Karat Gold & Silver


FLOW TEMP - 1295 FLOW TEMP - 1455 MEDIUM 1275 HARD 1365 FLOW TEMP - 1295

$16.95 $ 5.95

A non-toxic dip or wipe-on tarnish remover and cleaner for gold, silver, copper. and brass.

Hard Soldering liquid that helps prevents the formation of firescale and firecoat. No Flouron

GRIFFITH PRIPS FLUX 54501 14Oz.

SILVER

FLOW TEMP.

54502

54503 16Oz.

8Oz.

$4.95 $5.95 $7.95

Paste solder is pre-mixed with flux. Store in cool, dry place.


Just add small amounts of yellow ochre with alcohol to area needed to be soldered. 54471 2oz. - $4.95 54470 8oz. - $7.95

EXTRA EASY 411

EASY 1240

Yellow Ochre Powder

FLASHMINI TACK WELDER 503179 - $1195.00

PROCRAFT ELECTRIC SOLDERING MACHINE 54.050 - $449.95 54066 - Set of 5 carbons - $54.95 54055 - Small tapered carbon - $11.95 54054 - Round tapered carbon - $29.95

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

This versatile and powerful electronic tack welder is designed to provide temporary bonds between similar or dissimilar metals (gold, silver, brass, nickel, copper and platinum). Use it to tack pieces that would normally require binding wire or hand-held tweezers to get a correct fit.

www.lacywest.com

77

FACETRON

Features: Dial Indicator-dependable and accurate depth of cuts Two Quart Water Coolant System Urethane Splash Bowl Dop Chuck with exclusive Cam Lock System Digital Protractor Mast Anchor Lever Micro Height Adjustment Powerful Permanent Magnet Motor 12x18 Base Index Wheel Mast Head Adjustment Lever Electronic Speed Control KIT INCLUDES : Instruction book, set of 15 dops, water system, Manufacturer Lifetime warranty against defects or workmanship.

A lapidary luxury is how most faceter's describe the Facetron, because of its ease of operation, superior quality and precision that makes it a joy to create beautiful gemstones. The Facetron comes as a complete turn-key unit except for laps. If you already have your laps then unpack it and start faceting. Dollar for dollar the Facetron is the best faceting machine you can buy. Laps not included.

LAPIDARY SUPPLIES

4720204

Cabbing Machine
4720082

Diamond Jem 115v/60Hz

Mist Killer

For use with oil coolants. Simply add to the oil, and 90% of the undesirable oil mist will be eliminated. Mist Killer is what the lapidary field has been waiting for! One Pint treats 5 gallons 4740004 $15.95

For blade lubrication. Pella oil is the correct formulation for maximum diamond blade protection when cutting stone, ceramic, or masonry. One gallon. 4740007 $31.95

Pella Oil

Included: Dimafast metal bonded diamond wheels and true circle diamond bands on 6x1-1/2 expandable drums for the fastest, highest quality production of a wide variety of gemstones. A spin disc is provided for alternative polishes. Constructed of tough, heavy gauge aluminum with a shaft of stainless steel for corrosion resistance. Diamond bands cut and smooth very quickly and are also inexpensive to use, since you only replace the band not the entire wheel. Comes complete and ready to run with motor, lamp, rayspray recirculating coolant system. 2 Dimafast diamond wheels, 2 diamond bands and a 14,000 Rez belt plus compound for charging it. Spin disc, end covers included.

Diamond Spray

Fast setting, water clear. The standard for gluing opals doublets and triplets. Will harden in 2hrs. or 10 minutes under heat lamp.

Epoxy 330 330 1oz.

CE

Compact Ultraviolet Lamp

53180 53181 53182 53183 $16.95

Environmentally safe.Water based, Diamond rich, Anti-Coagulable, 2 ounce bottle.

1/4Mic. 1/2Mic. 1 Mic. 3 Mic. per bottle

Bonds almost anything to anything permanently. Has high heat and abrasion resistance. Will harden in 8 hrs. or 30 minutes under heat lamp.

Epoxy 220 220 1oz.

$6.95

4L x 1/2W 206054

Dop Wax Diamond Dop used by

$5.95

Resists flow under pressure. $11.95

diamond cutters. softens at 175F.

Facet Wax- brown wax adhesive. High shellac content dop wax. Softens at 145F. Pack of 4 sticks. 4Lx3/8W
Softens at 170F. 10Lx5/8W Pack of 4 Size 6x1.5 6x2.5 8x3 60 4736034 4736042 100 4736051 4736036 4736044

Leather Disc 6 Premium chrome tanned top. Grain is highest quality, pliable, medium-soft leather 3/32 thick. Excellent for general polishing 4738027 $ 6.95 ea. Oak Tanned Disc 6 Hard top grain. 1/8 thick. Preferred by many hobbyist. 4738041 $ 9.95 ea. Hard Felt Disc 6 Proven polisher recommended for opal, glass, agate and other materials that dont undercut. 4738015 $10.95 ea. Sponge Disc 6 Useful as a resilient backer for other discs. 8 Polishing Discs (special order) 4738009 $ 3.95 ea. 4732004 $14.95 $16.95

6 Polishing Discs

Longwave/Shortwave 115v/60Hz. This model features the Select-O-Wave which contains a sliding wavelength selector allowing you to either use longwave, shortwave or both simultaneously from the same tube. Other models available to fit view box. 4710074 $275.00

* Lamp optional

Jem Saw

4720037 78

LA C Y WEST SUP PL IES LTD. 604-669-5229

Slice gems, trim slabs faster and easier. High torque motor(60 in-oz) wont stall in normal use. Versatile machine accepts 4,5 blade. Fast & Quiet. 3000 rpm for better cutting longer blade life. On-center trimming allows maximum accuracy even with difficult shapes like crosses. Drop edge table eliminates interference on slab cuts. Vise or trim table attaches in two seconds. Guard design for slab cuts of any length. Stainless steel table. Lift out sump liner for easy cleaning. Front splash shield included (not shown). 115V/60Hz/1.0amps

High Temperature Black Wax also called Bankers #6, or Jewelers Cement.

Polishing Cabbing Belts Belts Package of 10


GRITS 4736005 4736006 4736013 4736014 220 47360052 4736037 4736045 320 4736053 4736038 4736046 400 4736054 4736039 4736047

4732003

Lapidary supplies : we can special order diamond disc , slab saws, trim saws, diamond maxi lap, diamond faceting discs, tumbler and lapping grits etc.

DISC Package of 10 6 INCH 4736004 8 INCH 4736012

600 4736055 4736040 4736048

4736007 4736015

4736008 4736016

CALL FOR PRICING

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

C ASTAWAY B OOK by Jack Mulock

HANDBOOK ON CENTRIFUGAL CASTING by Philip Romanoff A to Z guide to the practical ins and outs of casting, including projects. Well illustrated and well written by an expert.Soft Cover/ 256 pages # 62108 - $41.95 T HE J EWELRY E NGRAVERS M ANUAL by
R. Allen Hardy and John J. Bowman This book concentrates on jewelry engraving, with special emphasis on lettering, monogramming, and ring engraving. Paperback, 143 Pages.

Gives the details of sprueing, investing, burnout, pickling, cleaning. Soft Cover/ 61 pages # 62106 - $12.95

TECHNICAL BOOKS
by Ray Schow Techniques for bead and bright cutting. Soft Cover/220 pages 62440 - $89.95

THE ART

OF

DIAMOND SETTING

PRACTICAL JEWELRY MAKING by Loosli/ Mererz/ Schaffner. A reference book for the experienced professional. Hard Cover/164 pages 6201409 - $109.95 T ECHNIQUES OF J EWELRY I LLUSTRATION AND C OLOUR R ENDERING

Information on findings, processes, techniques, and materials for the novice or intermediate craftsperson. By Harold OConnor . Soft Cover Pocket Size/ 68 Pages #BK41 - $22.95

T HE J EWELRY S B ENCH R EFERENCE

FLEXIBLE SHAFT MACHINE

A comprehensive guidebook on the subject of plating precious metals. Soft Cover / 12 pages # 6201215 - $5.95 11th revised Edition. Illustrated how-toguide for beginners or a refresher for advanced artisans. Chapters include basics of a bead necklace, selecting tools and supplies, the hand knotted necklace, alternate endings, helpful tips, and redrilling and enlarging bead holes. By Mel Anderson. Soft Cover / 56 Pages 62465 - $12.95
OR

V I G O R P L AT I N G G U I D E

From novice to advanced, features 20 different projects. Great illustrations, easy to follow. Make Kings Link, Birds Nest, Birds cage, to name a few. Shows all tools needed. #L62510 - $49.95 Soft Cover /71 pages

CHAINS

#022202 - $13.95
BY

BECKY by Becky Goga

By Adolfo Mattiello A guide to quick sketching, the instructions will guide the beginner as well as the more advanced student in the production of precise and artful renderings. Includes 5 new templates. Hard Cover / 152 Pages 62495 - $129.95

THE BASICS

OF

BEAD STRINGING

S I LV E R S M I T H I N G

The Casters Bible, full of facts, figures and know -how. A must for the beginner and a valuable asset for the experienced. Illustrated and photographs. By Murray Bovin Soft Cover / 143 Pages # 62102 - $29.95
AND

C ENTRIFUGAL C ASTING

L OST WAX

Illustrated handbook describing everything from metals and their properties to tools and how to use them. By Tim McCreight. Soft Cover / 150 Pages # 62500 - $26.95 A studio reference for jewelers, metalsmiths and sculptors. Hundreds of concise drawings and descriptions. A complete appendix includes charts and tables not available elsewhere. Of special note are the safety considerations that makes this book a unique addition. By Tim McCreight . Soft Cover / 122 Pages # 62107 - $24.95 Benno Heune This book presents the basics in an easy-to-understand format. Every engraver will gain important knowledge from this useful book. Spiral bound, 45 pages. 022192 - $29.95

THE COMPLETE METALSMITH

By Oppi Untracht. Definitive guide and handbook. 900 photos and over 300 illustrations. Reference Book Hard cover / 840 pages # 62498 - $189.95

JEWELLERY CONCEPTS AND TECHNOLOGY

By Walter Schumann. Authoritative reference work, with colour photos of more than 1400 specimens. Includes technical data on gemstone properties, formation, and structure of gems, and cutting and polishing of gems. Hard Cover / 256 Pages # 62417 - $34.95

G EMSTONES

This is the book for all engravers, A classic. Over 1400 photos, drawings and designs. Mainly concerned with gun engraving, but techniques can be universally applied. By James B.Meek Hard Cover / 196 Pages # 62356 $74.95
OF

T HE A RT

The Flexible Shaft Machine is probably used more often that any other by the practicing craftsperson. This book serves as a starting point. Soft Cover / 47 Pages # 62499 $19.95
OF

E NGRAVING

T HE W ORLD

C HANNEL S ETTING D IAMONDS

This book explains the fundamentals of channel setting diamonds with the help of illustrations. By R.R.Wooding Hard Cover / 140 Pages # 62446 - $32.95 Detailed, well illustrated instructions will assist the apprentice as well as the expert. Tools, bead setting procedures, applications, and pave settings are the four major sections. Many enriched techniques are included. By R.R. Wooding. Hard Cover / 192 Pages # 62449 - $32.9 5

Written for all who do metalsmithing. Contains the latest techniques, practical ideas, art metal work. Instructions are clear, easy to follow, over 300 illustrations. By Murray Bovin. Soft Cover / 184 Pages 62456 - $24.95 Revised and enlarged edition. Fundamental processes and techniques, such as enameling, plating, etching. Three types of casting, methods of stone setting. By Murray Bovin. Soft Cover / 288 pages # 62451 - $34.95

A R T M E TA L

P RACTICAL C ASTING

BEAD SETTING DIAMONDS WITH PAVE APPLICATIONS

JEWELRY MAKING

B A S I C E N G R A V I N G by

Begins by describing the tools and supplies necessary, and goes into detail. The steps to do pin-point setting, prong settings, both fancy and round, bezel settings, channel, fishtail, and bead setting. By R.R.Wooding . Hard cover / 178 Pages # 62450 - $ 32.95 Silversmithing is an art form in itself. The authors show you hundreds of details that will make your work special. Written by the pros - Rubert Finegold and William Seitz . Hard Cover / 460 Pages # 62501 - $61.95

DIAMOND SETTING

By Charles Jarvis . A comprehensive reference book which covers the entire field of jewelry manufacture and repair. Hard cover / 212 pages # 62459 - $44.95

J E W E L RY R E PA I R M A N U A L

S ILVER S MITHING

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

www.lacywest.com

79

WAT C H B AT T E R I E S & TO O L S
SCREWDRIVERS
SD009 Set of 9 French Made - $69.95 Top quality precision screwdrivers on a rotating base with 19 spare blades. Colour coded handles. 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm

With case holding 3-pin opening wrench.

Jaxa Wrench W286 - $29.95

UNIVERSAL VICE FOR WATERPROOF WATCHES Held in bench vice. Nylon body. Chucks in red plastic. 291 - $12.95

S54 - Set of 9 - ECONOMY - $39.95 Replacement Blades available Sold by the dozen per size.

Large Master Case Opener - US made, comes with 4 sets of different pins. CWR60000 - $66.95 CRYSTAL PRESS 213 $ 29.95

BERGEON BAKELITE 30540 - $39.95


DUST BLOWER

WATCH CASE KNIFE 266 - $9.95 Quality pocket knife case opener.

With 12 dies. Hand crystal press for fitting crystals into watch cases.

CASE-CLOSING PLIERS 46805 - $16.95

PLIER TYPE CHAIN LINK REMOVER PLR14000 - $32.95 Replacement pins: PLR14005 - 0.8mm - $2.36 ea PLR14006 - 1.0mm - $2.36 ea SNAPPY CASE OPENER KNF16800 - $14.95

DELUXE UNIVERSAL BATTERY CHANGE KIT BAT51000 - $34.95

WATCH BRACELET PIN REMOVAL KIT PSH10000 - $25.95

80

LR44 301 303 309 315 317 319 321 329 335 337 339 341 346 357 361 362 364 365

RENTA PRICES BASED ON MINIMUM ORDER OF 5 BATTERIES. PRICED PER BATTERY. ADDITIONAL 10% DISCOUNT ON 100 OR MORE. CELL CODE AND CONVERSION CODES ARE LISTED.
LR44 SR43SW SR44SW SR754SW SR716SW SR516SW SR527SW SR616SW SR731SW SR512SW SR416SW SR614SW SR714SW SR7721SW SR44W SR721W SR721SW SR621SW SR1116W $0.45 $1.45 $1.30 $1.45 $1.10 $1.15 $0.85 $0.85 $1.15 $1.65 $2.45 $2.75 $1.85 $2.15 $1.59 $0.95 $0.68 $0.58 $1.95 366 370 371 373 376 377 379 381 384 387S 389 391 392 393 394 395 396 397 399 SR1116SW SR920W SR920SW SR916W SR626SW SR626SW SR521SW SR1120SW SR41SW RW51 SR1130W SR1120W SR41W SR754W SR936SW SR927SW SR726W SR726SW SR927W $1.55 $0.74 $0.68 $1.15 $1.20 $0.55 $0.85 $0.95 $0.72 $2.25 $1.03 $0.69 $0.68 $1.25 $1.19 $0.68 $0.95 $0.68 $0.70 1025 1216 1220 1661 1620 2016 2025 2032 2320 2325 2430 CR1025 CR1216 CR1220 CR1661 CR1620 CR2016 CR2025 CR2032 CR2320 CR2325 CR2430

LITHIUM BATTERIES

$1.70 $1.11 $1.00 $1.11 $1.35 $1.10 $0.93 $0.93 $2.05 $2.00 $2.00

L A C Y WES T SUPP LIES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

BAT100 - Battery Tester $11.95ea

JEWELLERS SUPPLIES
VCC 1ST YEAR STUDENT LIST
KIT CONTAINS:
STUDENT PRICE

- 6 Half round ring file, one each of cut 0 and cut 3 - 6 Hand file, Cut 1 - 3 wood file handles RETAIL PRICE - $891.96 - 1 medium cut and 1 fine cut, 6 piece Swiss needle file set - 7 Vul-crylic swiss file - 3 adjustable sawframe - 3 dividers - Vernier gauge, Stainless steel - Degree/Spring Gauge - Pliers, one each of: flat nose, round nose, chain nose, 1/2 round & flat nose, diagonal cutter and light flat nose smooth jaw parallel pliers - One round ring mandrel, graduated sizes 1-15 - One round bezel mandrel - Mahogony ring clamp - Utility tweezers made of heavy steel and two pairs of curved fiber tweezers with X-Lock - Brass pin vise with 2 steel chucks - Hammers, one each of: Ball pien hammer 2-3/4 head, 2-3/4 Swiss style rivetting hammer, Chasing hammer 1 diameter (German made), 1-1/2 rawhide mallet with a 6oz head - Horn anvil - Curved burnisher - 12 piece high speed steel twist drill set in wood box - Burs, one each of: Ball 1.9mm, Ball 4mm, Ball 5.9mm, Cylinder 1.7mm, Cylinder 4.7mm, Cylinder 11mm - Chuck Key with handle - 6 metal ruler - 3 metal set square - German made metal snips - Silver solder, one (5g) each of: Easy, Medium and Hard - Hand torch striker

- $802.76

Cup Set sold separately. Replacement Cups and Probes can be ordered. Handles delicate miniature objects without scratching, breaking or pinching. Avoids contamination of parts and performs tweezer functions such as sorting, picking up, holding, carrying etc. A lightweight, portable unit, completely assembled and ready for immediate operation as soon as the proper size tip is selected and installed. The vacuum unit is small, 41/2H x 2-3/4 in diameter, has an adjustable vacuum pressure control from 1 HG to 15 HG and an air flow of 125 cubic inches per minute. On/Off switch noiseless during operation. Set contains vacuum generator, anodized aluminum cylindral probe, in-line filter to protect generator, 4 length of tubing and five stainless steel probe tips. Used in the semi-conductors, micro-electronic, ball bearing, optical and precision instruments.

Vacuum Pick-up Tweezers

Junior Polishing Set

57650 115 Volts $179.95 57650X 220 Volts $225.95 57651 Filter $ 8.95 57652 Probe set $ 31.95 57660 Cup Set $ 31.95 Cup Set - 8 neoprene vacuum cups which fits onto probe. 3/16 to 5/8

Prices in Canadian Funds/Call for Confirmation/Prices subject to change.

47100 Junior Polishing Complete Kit $249.95 47101 Motor with spindles only $189.95 47102 Speed Control for 47100 $ 21.95 47271 Left side replacement spindle $ 9.95 47270 Right side replacement spindle $ 9.95 Procraft - Grobet USA

1/15 HO, 5000 RPM motor Electronic variable-speed control Operates on 120 volt AC Attractive hammertone finish Mounted on rubber feet to prevent creeping Has four holes for mounting Measures 14 W x 6 D x 7 H Includes the following accessories: - 2-1/2 muslin buff for tripoli - 2-1/2 cotton flannel buff for rouge Tripoli compound (47479) - Red rouge - 2 Black bristle brushes - 2 Felt cones - 1 Wood mandrel for ring shells - 2 emery shells - 2 1/4 inch tapered spindles for motor.

Designed to meet the needs of the individual craftsman. Motorspeed can be varied for use with various grinding, polishing, and buffing wheels. Hood catches polishing debris, keeping area clean. Features:

Practically everything needed for your jewellery making projects. All first quality tools for sawing, drilling, twisting, hammering, filing, polishing, etc. Set Contains: V-slot board & clamp, sawframe, sawblades, dividers, ruler, center punch, scriber, chinese white, hand drill, twist drills - 6 assorted, pin vise, 3 pliers: round nose, flat nose, chain nose, snips, hammer, mallet, wood dapping block, steel ring mandrel, ring clamp, setting burnisher, prong pusher, flat file, half-round file, 3 needle files, india stone, emery paper 4 assorted sizes, felt hand buff, tripoli compound, chamois buff, red rouge, adhesive, soldering torch, asbestos free pad, charcoal block, pickling compound, plain tweezers, soldering clamp tweezers, copper tongs, manual. 38550 SET 38551 Replacement Tool Box $449.95 $ 24.95

Jewellery Making Set

www.lacywest.com

81

JEWELLERS SUPPLIES

For a fraction of the cost of any comparable machine, the Neutec J-2R IV gives you superior castings and greater production capacity. This exceptional machine combines advanced technology with practical design to give you the casting capability you need today and well into the future. The J-2R IV employs an oxygen-free atmosphere for the metal during melting and pouring to help eliminate oxidation. The large volume graphite crucible also removes oxygen that may previously have been dissolved in the metal. This means fewer defects and lower reject rates. Cast at the optimum temperature for any design without overheating the metal. The J-2R IV measures the metal temperature in the center of the metal pool, giving you accurate casting temperatures. The crucible is a bottom-pour design, so there is a very little drop in metal temperature from crucible to flask. After initial warm-up, the casting cycle time of the J-2R IV is a fast 6 to 8 minutes, depending on the size of the load. The large-volume crucible holds 184cc of metal (902g 14KY or 722g SS). Accommodates flask sizes from 2.5 to 4 in diameter and up to 9 high. Simple to install and operate in only three square feet of bench space, the J-2R IV requires only that you set the temperature controller for the desired casting temperature, add the casting grain to the crucible, insert the flask and (at the set temperature) push the casting lever. - CALL FOR CURRENT PRICING -

J-2R SERIES IV RESISTANCE-HEATED VACUUM CASTING MACHINE (NEUTEC)

The J-ZP delivers all the benefits of the original J-Z ----plus the cast-enhancing Neutec Dynamic Pressure System (DPS). Developed specifically for the J-ZP, the DPS is a sophisticated two-stage system that increases the fill rate at lower casting temperatures and improves reproduction of surface detail so you have fewer rejects and easier finishing. Neutec Power Stirring technology prevents alloy ingredients from separating once the metal is molten. Power Stirring continues right up to the pour, so you never have to over-karat to get target karat values throughout the tree. Accurate temperature control delivers successful stone-in-wax casting because you cast at the lowest possible metal temperatures, reducing thermal shock to the stones. In addition to diamonds, CZs, sapphires and rubies, you can successfully cast Gilson created opals, labgrown emeralds and many other stones. The crucible is a surprisingly large 184cc, capable of alloying 2.7kg of 18K or casting up to 1.6kg at one time with the same precision at 100g as it does at 1000g. The flask size is no less impressive at a roomy 5 x 9 max.

J-ZP INDUCTION-HEATED VACUUM CASTING MACHINE (NEUTEC)

WILL CAST SILVER, GOLD PLATINUM AND STEEL!

COMPACT DESIGN

82

WELL MADE AND EASY TO USE

- 43CM X 40CM X 44CM

The MC 15 Micro Casting System is developed especially for use in goldsmith and jewellery design studios and is ideal for casting in technical areas and dental laboratories. This system is constructed very compactly for a minimum space requirement in the studio. The small amount of gypsum for embedding the wax model may be mixed by hand, and for the burn out of the flasks the smallest 900 C oven available can be used. When casting expensive metals it is especially important to have only a minimum material consumption for the sprue. With the MC 15 up to 15ccm (liquid metal) can be melted, but it is also possible to melt as little as 1 or 2 ccm! In spite of its small dimensions, the MC 15 is equipped with numerous technical features ensuring consistent high quality casting. The induction heating is highly tuned for the small metal volume. It combines fast heating (up to 1,950 C) with a thorough mixing of the metal by inductive bath movement. Melting can take place under vacuum or with protective gas to reduce oxidation. After casting, by giving the complete casting unit a quarter turn, overpressure can be supplied to optimise the fill. Technical data: Max power 230V, Max temp. 1950C, Crucible volume 150g, Digital display with power control, Ceramic crucible for melting of steel and platinum, connection for valium gas and overpressure, weight 27kg. Largest flask size 3 x 3 - CALL FOR CURRENT PRICING -

GERMAN INDUCTION CASTING MACHINE THE INDUTHERM MC 15 FOR HIGH QUALITY SINGLE CASTING IN THE SHORTEST TIME -

- CALL FOR CURRENT PRICING -

LA C Y WEST SUP PL IES LTD. 604-669-5229

www.lacywest.com

Toll Free 1-800-6 6 7 - 4 11 8

ABRASIVES ABRASIVES, CORD/TAPE ACIDS, TESTING ADHESIVES AIR COMPRESSOR ALCOHOL LAMPS ALL SET KIT ALLOYS ANNEALING PAN ANODES ANTI-FLUX ANTI-SEPTIC ANVILS APRON ARBOR, WHEEL ARRESTORS, FLASHBACK ATTACK - SOLVENT EPOXY AUTOMATIC CENTER PUNCH AWL, BEAD STRINGING

BAGS BATTERIES BATTERY TESTER BEAD BLASTER BEADING BLOCK BEADING SUPPLIES BEADING TOOLS BEAKERS BEESWAX BELL JAR BENCH BLOCKS BENCH DUSTER BENCH PINS BENCH SHEARS BENCHES & HUTCHES BERGEON BAKELITE BLOWER BEZEL BLOCKS BEZEL MANDRELS BEZEL PUSHERS BEZEL ROLLERS BINDING WIRE BLADES, KNIFE BOOKS BORAX BORIC ACID BOWLS, MIXING BOWLS, PITCH BOXES BOXING WAX BRACELET HOLDERS BRACELET MANDRELS BRACELET SIZERS BRASS SCRATCH BRUSH BRUSHES, BRISTLE BUFFS BURNISHERS BURNISHING SET, STONE SETTING BUR LUBRICANT BUR SETS BUR STAND BURS BUTANE TORCHES CALIPERS CARBON RING STAND CARBON STEEL SHOT CARTRIDGE ROLLS CASE KNIFE CASE OPENERS CASTALDO RUBBER CASTING GRAIN CASTING MACHINES CASTING SUPPLIES CEMENT, CHASERS CEMENT, CRYSTAL CEMENT, SETTERS CENTRE PUNCHES CERAMIC RING STAND CERAMIT CHAIN LINK REMOVER CHASERS HAMMERS CHASING TOOLS

2, 3, 5 5 70 6, 73, 78 32-33 17 25 76 47 45 19 22 20 44 39 48 6, 73 20, 62 73 71, 73 80 80 65 27 73 27 45 15, 21 11 20 42 63 68 62 80 20 37 62 62 63 18 33, 79 19 19 13 20, 34 72 15 68 37 37 42 40-41, 63 40, 42-43 68 56 7 7-8 7 7-8 48 62 47 66 2 80 80 18 76 11-12, 82 9-13 6 6, 73 6 20, 62 47 74 80 35 20

CHARCOAL BLOCKS CHEMICALS CHELSEA FILTER CHINESE WHITE CHUCK KEYS CHUNKING BRUSHES CIRCULAR SAWS CLAMPS, RING CLEAN EARTH PLATING CLEANERS, STEAM CLEANERS, ULTRASONIC CLEANING BASKETS CLEANING BRUSHES CLEANING SOLUTIONS CLOTHS COIN ENVELOPES CONNOISSEURS WIPES COPPER SHEET COPPER TONGS COTTON GLOVES CRIMPS CRUCIBLES CRUCIBLE TONGS CRYSTAL PRESS CUTTERS, RING CUTTLEFISH CYBER-THERM TWEEZER

SOLUTIONS

DAPPING BLOCKS DAPPING PUNCHES DARK FIELD VIEWER DEBURRING WHEELS DELFT CLAY CASTING SYSTEM DENT REMOVER DESIGN BLOCKS DIAMOND BURS DIAMOND DRILLS DIAMOND FILES DIAMOND FLYWHEELS DIAMOND GAUGE DIAMOND PAPERS DIAMOND SCALES DIAMOND SELLER DIAMOND SHOVEL DIAMOND SIEVES DIAMOND SPRAY DIAMOND TESTERS DIAMOND TWEEZERS DIAMOND WASHING CUP DICHROSCOPE DIGITAL CONTROLLER DIGITAL GAUGES DISC CUTTERS DISCLOSING WAX DISPLAY DIVIDERS DOP WAX DRAW BENCH DRAW TONGS DRAWPLATES DRILL, HAND DRILL PRESS DRILLS DUMATT TOOL DUST COLLECTORS

47 19 29 63 24 40 8 34, 37, 44, 63 46 65 64 64 42 64-65, 74-75 22 71 22 76 65 22 73 13 10, 13 80 58 63 68 20 20 31 2 12 20 20 7-8, 41 7-8 23 8 31 31 70 31 31 31 78 29 69 31 31 12 31 20, 56 15 71-72 68 6, 78 21, 61 21, 61 21 68 24 7-8 14, 16 38-39 62 22 72 48 77 46 12 2 2 5 5 74 41 32 51-54 56-57 71

EPOXY ESCAPEMENT FILES EYE LOUPES

FABULUSTRE FACE MASK, SHIELD FELT BUFFS & BOBS FERRIS CARVING WAXES FIBERGLASS BRUSH FILE CLEANERS FILE HANDLES FILES FILTERS FINGER GAUGES FINGER GUARDS, PROTECTORS FIXTURING COMPOUND FLASHBACK PROTECTOR FLASKS FLEX SHAFT HANDPIECES FLEX SHAFT HOLDER FLEX SHAFT KITS FLUSH CUTTERS FLUX FLUX BRUSHES FOAM PAD FOOT PEDAL, FOREDOM FOREDOM MAINTENANCE KIT FOREDOM MANUAL CONTROL FRAMES, MOLD FRENCH WIRE FURNACES GASKETS, SILICONE GAUGES GEM BOXES GEM JARS GEMOLOGICAL EQUIPMENT GEMSTONE HOLDER GIFT BAGS GLOVES GLUE GOGGLES GOLD TESTERS GOLDSMITH HAMMER GRAPHITE CRUCIBLES GRAVER HANDLES GRAVERS GRAVER SHARPENER GRS PRODUCTS GUARDS, RING GUILLOTINE SHEARS HAGERTYPRODUCTS HAMMERS & MALLETS HAND DRILL HAND VICE HANDLE, FILE HANDLE, FOR MELTING DISH HANDLE, GRAVER HANDLE, TOOL HAND BRUSHES HAND PROTECTOR HANDPIECES, FLEXSHAFT HANDPIECES, GRS HANDPIECE REST/HOLDER HAT BOXES HEAT SHIELD HEATING TRIPOD HEATLESS MIZZY WHEELS HEARTS & ARROWS LOUPE HOKE JEWEL TORCH HOLDER, TORCH HOLDER, WORK HOSE CONNECTORS HOSES HUTCHES INDUTHERM MC15 INGOT MOLDS INJECTION WAXES

6, 73, 78 23 36 44 44 40, 43 14 42 23 23 23 39 37 42, 44 6 48 13 26 24 25 58-59 19 63, 74 71 25 24 25 17-18 73 10, 12 9-11 31, 37, 62 31, 71 71 29-31 69 71 13 6 47 70 35 12-13 27 27-28, 34 27, 32 32-34, 55 37 60 75 35 68 68 23 13 27 27 63 39 24-26 33 24 72 47 47 5 31 48 47 62 48 48 62 82 13 11, 18

EAR-JIG EAR-PIERCING SUPPLIES EARRING DISPLAY ELECTRIC LIGHTER TORCH MATE ELECTRIC SOLDERING MACHINE ELECTRO CLEANER ELECTRO-MELT EMERY CARTRIDGE ROLLS EMERY PAPER EMERY STICKS EMERY WHEELS, DISCS ENAMEL END BRUSHES ENGRAVING BLOCK ENGRAVING MACHINES ENLARGERS, RING ENVELOPES

INJECTORS, WAX INLAY WAX INSIDE RING BUFFS, FELT INSIDE RING ENGRAVER INVESTMENT IONIC CLEANERS

JAX METAL SOLUTIONS JAXA WRENCH JEM SAW JET SETT FIXTURING COMPOUND JEWELLERY CLEANER JEWELLERY MAKING SET JEWELLERY PINS JEWELLERY TAGS JEWELLERY TRAYS, DISPLAYS JO-DI GAUGE JUMPRINGER JUNIOR POLISHING SET KARAT STAMPS KILN, ULTRALITE PMC KILNS KNIFE, MOLD CUTTING KNOTTER, TRI-CORD KOOL JOOL

17 15 43 51, 54 11 65 74 80 78 6 64-65 81 71 71 71-72 31 56, 60 81 63 10 10-12 18 73 47 19 62 78 38-39 50 16, 24, 55 49 31 48 58 18 18 48 19 31, 36 31 7 15, 21 67 67 36, 62 35 37 4 68 16 66 13 12 76 70 24 30-31, 55 56 27, 56 52-53, 55 25 40-41 78 16 56 5 29 17 17 18 13 17-18 18 18 18 18 5 39

NECKLACE MANDREL NEEDLE FILES NESTED BOXES NEUTECJ2R NEUTEC SUPPLIES NIPPERS NO-LAP BANDS NYLON CORD

N O

37 23 72 12, 82 9-10 58-59 5 73 77 33 5 78 10 6 36 7, 71-72 10, 12 19 45 71-72 71 31 77 19, 74 26 31 7 63 14 45 17 13 65 19 62 71 20 20, 34 35 66 71 45 58-59 57 80 73 60 29-30 44 22 44 38-39 3 10 7 58 62, 68 49 3 20 20 45 12 13 26, 33 18 2 35 73 45 29 30 48 71 18 39, 42

K L

OCHRE, YELLOW OIL, AIR COMPRESSOR OIL, HONING OIL, PELLA OIL, VACUUM PUMP OPTICON FRACTURE SEALER OPTIVISORS ORGANIZERS OVENS OXIDIZERS OXYGEN GENERATOR

LACQUER & STRIPPER LAMPS LAPIDARY SUPPLIES LAPPING MACHINE LASER WELDER LATHE LEASING INFORMATION LEVERAGE GAUGE LIGHTER, TORCH LINDSTROM PLIERS LIQUACAST LIQUAGLASS LITTLE TORCH LIVER OF SULPHUR LOUPES LOUPES, HEARTS & ARROWS LUBRICANT, BUR & DRAWING LUBRICANT, WAX MAGNETIC FINISHER MAGNETIC SEPARATOR GUN MAGNIFIERS MALLETS MANDRELS MANDRELS, MINIATURE MARK-A-SIZE MATT TOOLS MEDIA, TUMBLING MELTING DISH METAL MELT FURNACES METALS, SHEET, WIRE METTLER SCALES MICROMOTORS MICROSCOPES MILLGRAIN MACHINE MILLGRAIN TOOLS MILLING MACHINE MINI VISE, FOREDOM MINIATURE BRUSHES MIST KILLER MITER BOX MITER JIG MIZZY WHEELS MOISSANITE TESTER MOLD CLAMP MOLD CUTTING CLAMP MOLD CUTTING KNIFE MOLD, INGOT MOLD FRAMES & PLATES MOLD LOCK FORMER MOLD RUBBER MOLD RELEASE MOLD SEPARATION CREAM MOORES DISCS MOTORS

PACKAGING PAD, DISPLAY PARCEL PAPERS PASTE SOLDER PATINAS PAVETRON PEARL DRILLING VISE PEARL DRLLS PEG CLAMP PELLETS FOR MATT GUN PEN PLATING PEN, WAX PERFORATED FLASKS PICKLE POTS PICKLING COMPOUND PIN VISES PINS, JEWELLERY PITCH PITCH BOWLS PLANISHING HAMMERS PLASTIC MEDIA PLASTIC TRAYS PLATING PLIERS PLIERS, BENDING PLIERS, CASE CLOSING PLIERS, CRIMPING PNEUMATIC SPRUE CUTTER POLARISCOPE POLISH IT POLISHING CLOTHS POLISHING COMPOUNDS POLISHING MOTORS & UNITS POWDERED COMPOSITIONS PRECIOUS METAL CLAY-PMC PRO-CUT LUBRICANT PRONG LIFTING PLIER PRONG PUSHER & LIFTER PUK SPOT WELDER PUMICE PUNCHES, CENTERING & RIVETING PUNCHES, DAPPING PURIFIER, AIR PYROMETER QUARTZ STIRRING ROD QUICK CHANGE HANDPIECES QUICK SIL RADIAL BRISTLE DISCS RAWHIDE MALLETS REAMER RECTIFIERS REFLECTIVITY METER REFRACTOMETER REGULATORS REPAIR BAGS, ENVELOPES RESIN RELEASE RESPIRATOR

RING BENDER RING BUFFS RING CLAMPS RING CUTTERS RING GRIPPER RING GUARDS RING MANDRELS RING SIZERS & STICKS RING STAMPING DEVICE RING STAND RING STRETCHERS RING TAGS RINGSTAR ENGRAVER RIVETING HAMMERS ROLAND PRODUCTS ROLLING MILLS, STANDS ROTARY TUMBLERS ROUGE RUBBER HOSES RUBBER MIXING BOWL RUBBER, RUBBER MOLDS RUBBER SLEEVES RUBBERIZED ABRASIVES RUBY BENCH STONE RUBY POINTS RUBY POWDER RULER, METAL

SAFETY TAPE SALES CASES SAND BLASTER SAND CASTING SANDING DISCS SATIN-FINISH BUFFS SAW, CIRCULAR SAW FRAMES SAWBLADES SCALES SCISSORS/SNIPS SCRAPERS SCRATCH BRUSH SCREWDRIVERS SCRIBERS SCULPTURE WAX SEALING WAX SEPARATING DISCS SET SQUARE SETTERS HOLD IT SETTING TOOLS SHARK SKIN TAGS SHARPENING STONES SHEARS SHELLAC SHERLINE LATHES SHOT, STEEL SILK CORD SMITH TORCH SNIPS SOLDER SOLDER PIC SOLDER PRINTS SOLDERING BLOCKS SOLDERING BOARDS SOLDERING EQUIPMENT SOLDERING FLUX SORTING TRAYS SPAREX SPECTROSCOPE SPINDLES SPLASH HOODS SPLIT LAP SPRUE BASES SPRUE CUTTERS SPRUE FORMERS SPRUE WAX STAINLESS STEEL SHOT STAKES STAMPING TOOLS STAMPS STAND, TORCH STAYBRITE SOLDER & FLUX STEAM CLEANER, DETERGENT STEAM CLEANERS STEEL SCRATCH BRUSH STICKY WAX

56-57, 60 43 34, 37, 44, 63 57-58 44 37 16, 37 37, 63 68 16, 47, 72 56-57 71 51 35 52-53 60-61 66 44 48 13 18 13 3 5 40 3, 44 63 42 72 65 12 5 2, 40, 42 8 63 63 70 58 68 42 80 20, 68 15 6 5 63 68 6, 34, 68 71 5 68 6 55 66 73 48 58-59, 68 77 47 19, 47 47 47 47-48, 77 19, 77 73 19 30 39, 41 38-39 38-39 13 68 17 15 66-67 20, 57 68 63 47 19, 77 65 65 42 15

STIRRING RODS STONE GAUGE STONES, ABRASIVE STUDEX EAR PIERCING SUPER GLUE SWISS FILES SWISS TORCH SYSTEM

EQUIPMENT

TAGS TAP AND DIE SETS TAPERED SPINDLES TARNISH PREVENTION TARNISH REMOVER T-BAR DISPLAY TESTING ACIDS TESTERS, DIAMOND & MOISSANITE TESTERS, GOLD THERMO-LOC THIRD HANDS TIGER TAIL TIN OXIDE TIVA CLEAN TIX FLUX ANTI, TIX SOLDER TONGS TONGS, CRUCIBLE TONGS, DRAW TONGS, FLASK TORCHES & ACCESSORIES TRAYS, JEWELLERY TRI-CORD BEAD STRINGING KIT TRIPOD W / MESH SCREEN TRIPOLI TUBE BENDER TUBE CUTTERS TUBE HOLDER TUBE LEVELLER TUBING TUMBLERS TUMBLING COMPOUNDS TUMBLING MEDIA TWEEZERS TWEEZERS, LASER TWEEZERS, PLASTIC COATED STEAM TWIST DRILLS ULTRASONIC ACCESSORIES ULTRASONIC CLEANERS ULTRASONIC CLEANING SOLUTIONS UNIVERSAL ENGRAVING HOLDER U-PINS UTILITY TWEEZERS UTILITY WAXES U V LAMP VAC-U-COAT VACUUM CAST MACHINES & ACCESSORIES VACUUM PICK-UP TWEEZER VACUUM PUMP VACUUM PUMP OIL VCC 1ST YEAR STUDENT LIST VELVET PADS VERNIER GAUGES VIBRATORY TUMBLERS VISES VULCANIZERS VUL-CRYLIC FILES WASHOUT BRUSHES WATCH BATTERIES WATCH MAKERS LOUPE WATCH TOOLS WATER SOLUBLE WAX WAX WAX BURS WAX, CARVING WAX DRIP TRAY WAX FILES WAX INJECTORS WAX KLEEN WAX LUBRICANT WAX PENS WAX, PERFECT PURPLE

9, 13 31 5, 40 22 6 23 47 71 58 39, 41 74-75 75, 77 72 70 29 70 6 34, 63 73 3, 44 65 19, 77 69 10, 13 21, 61 10, 13 47-48 71 73 47 44 60 56 57, 62 56 76 66-67 66 66 36, 69 50 64, 69 7 64-65 64 64-65 62 71 69 15 78 11 11, 82 81 10 10 81 71 62 66 25, 34, 62, 80 17 16, 23 42 80 36 80 15 11, 14-15, 18 7 14 17 16 17 15 15 17 15

WAX POT WAX RING MANDRELS WAX RING TUBES WAX SAWBLADES WAX THERMOMETER WAX TOOLS WAX, WIRE WAXOLVENT WHALE TORCH WHEELS, CUT OFF WHEEL SHAPING BLOCK WHEELS, SILICON CARBIDE WICKS FOR ALCOHOL LAMP WIRE, BINDING WIRE BRUSHES WIRE CUTTER WIRE, FRENCH WIRE, SILVER WOOD BENCH PINS WOOD CARVING, GRAVERS WOOD DAPPING BLOCK WORKBENCH Y-CONNECTORS YELLOW OCHRE ZAM ZIG ZAG TOOL ZIP-LOCK BAGS

Y Z

17 16 14 63 17 16-17 15 15 48 5 5 3 17 63 42 56 73 76 63 27 20 62 48 77 44 56 73

ORDERING INFORMATION YOU MAY PLACE YOUR ORDER ONLINE AT: WWW.LACYWEST.COM OR VIA THE PHONE: 604-669-5229 OR 604-6281839. TOLL FREE: 1-800-667-4118. YOU MAY ALSO EMAIL US DIRECT AT: lacy@lacywest.com.
SHIPPING METHODS CANADA POST, UPS AND COURIER SERVICE.
OUR LOCAL

ORDER WEIGHT AND THE SPEED OF DELIVERY YOUVE CHOSEN. -CHARGES FOR COD ARE $6.50 PLUS ACTUAL SHIPPING COST. -COD IS AVAILABLE IN CANADA ONLY.

PRICING FOR DOMESTIC SHIPPING -YOUR FLAT SHIPPING RATE IS BASED

ON

U V

MONDAY TO FRIDAY FAX 24 HOURS


RETURNS AND CORRECTIONS

8:30AM - 4:30PM

OPERATION:

HOURS OF

PAYMENT METHODS -WE ACCEPT VISA AND MASTERCARD. FOR YOUR SECURITY, WE REQUIRE THE CREDIT CARD NUMBER, EXPIRATION DATE, BILLING ADDRESS AND CVV2 CODE (FOUND ON THE SIGNATURE LINE OF YOUR CREDIT CARD) WITH EVERY CREDIT CARD PAYMENT. -COD (AVAILABLE IN CANADA ONLY) -MONEY ORDER -WIRE TRANSFER (PLEASE CALL FOR MORE INFORMATION) -LEASING OPTIONS (SEE PAGE 49) - CALL LACY WEST SUPPLIES FOR A REFERRAL
OR CONTACT A LEASING COMPANY OF YOUR CHOICE.

-WE ACCEPT RETURNS ON MERCHANDISE THAT IS UNUSED, UNDAMAGED AND IN ITS ORIGINAL PACKAGING. [ANY GOODS THAT ARE USED, DAMAGED OR NOT IN THE ORIGINAL PACKAGING (I.E. GOODS THAT CANNOT BE HONESTLY SOLD AS NEW) ARE CONSIDERED TO BE USED.] -RETURNS MUST BE AUTHORIZED BY LACY WEST PRIOR TO RETURN. -RETURNS MUST BE PACKED IN A STURDY CARTON OR BOX. -RETURNS MADE WITHOUT AUTHORIZATION OR NOT SUFFICIENTLY PACKAGED MAY BE REFUSED. -ITEMS RETURNED FROM OUTSIDE CANADA MUST BE CLEARLY MARKED AS PREVIOUSLY CLEARED GOODS RETURNING TO CANADA ON ALL CUSTOMS DOCUMENTS AND ASSOCIATED PAPERWORK. IF THIS IS NOT DONE, ANY TAX AND DUTY WE MUST PAY TO RECEIVE THESE GOODS WILL BE DEDUCTED FROM YOUR RETURN. -RETURNS MUST INCLUDE A COPY OF THE INVOICE AND A NOTE OF EXPLANATION. -ALL SHIPPING AND INSURANCE COSTS FOR RETURNS ARE THE CUSTOMERS RESPONSIBILITY. -RETURNS MADE WITHIN FOURTEEN (14) DAYS WILL BE REFUNDED (EXCLUDING SHIPPING CHARGES). -RETURNS MADE WITHIN THIRTY (30) DAYS WILL BE CREDITED TOWARD FUTURE PURCHASES. -RETURNS MADE AFTER THIRTY (30) DAYS MAY INCUR A USAGE FEE OF 10% PER-MONTH.

Aluminum Antimony Beryllium Bismuth Cadmium Carbon Chromium Cobalt Copper Gold, 24K Pure Iridium Iron Lead Magnesium Manganese Molybdenum Nickel Osmium Palladium Phosphorus Platinum, Pure 15% Irid Plat 10% Irid Plat 5% Irid Plat Rhodium Ruthenium Silicon Silver, Pure Silver, Sterling Silver, Coin Tin Zinc B&S GAUGE 1 2 . . 3 . 4 . . 5 . 6 . 7 . 8 . 9 . 10 . 11 12 . 13 14 . 15

METAL

MELTING POINT AND WEIGHTS


SYMBOL Al Sb Be Bi Cd C Cr Co Cu Au Ir Fe Pb Mg Mn Mo Ni Os Pd P Pt Rh Ru Si Ag Sn Zn MELTING POINT F 1220 1167 2340 520 610 3430 2723 1981 1945 4449 2802 621 1202 2273 4760 2651 4892 2831 111 3224 3310 3250 3235 3571 4500 2605 1761 1640 1615 450 787

C O M PA R I S O N C H A R T S
OF

86

INCH MILLIMETER (DECIMAL) (MM) 0.289 7.348 0.258 6.543 0.250 6.350 0.234 5.953 0.229 5.827 0.219 5.556 0.204 5.189 0.203 5.154 0.188 4.762 0.182 4.621 0.172 4.366 0.162 4.115 0.156 3.969 0.144 3.664 0.141 3.572 0.128 3.263 0.125 3.175 0.114 2.906 0.109 2.778 0.102 2.588 0.094 2.381 0.091 2.304 0.081 2.052 0.078 1.984 0.072 1.828 0.064 1.628 0.063 1.588 0.051 1.449

GAUGE

TO INCHES TO

MELTING POINTC 660 630 1280 271 321 1890 1495 1083 1063 2454 1539 327 650 1245 2625 1455 2700 1555 44 1773 1821 1788 1779 1966 2500 1430 961 893 879 232 419 B&S GAUGE 16 . 17 18 19 20 . 21 22 23 24 25 26 . 27 28 29 30 31 32 33 34 35 36 37 38

VARIOUS METALS AND ALLOYS


SPECIFIC GRAVITY 2.70 6.62 1.82 9.80 8.65 2.22 7.19 8.90 8.96 19.32 22.50 7.87 11.34 1.75 7.43 10.20 8.90 22.50 12.00 1.82 21.45 21.59 21.54 21.50 12.44 12.20 2.33 10.49 10.36 10.31 7.30 7.10

MILLIMETERS

WEIGHT IN TROY OZS/CU IN 1.423 3.448 0.959 5.163 4.557 1.170 3.788 8.900 4.719 10.180 11.849 4.145 5.973 0.917 3.914 5.347 4.691 11.854 6.322 0.959 11.301 11.301 11.349 11.325 6.553 6.428 1.247 5.525 5.457 5.430 3.846 3.7758

1. Find the present metal in the first vertical column. 2. Multiply the present weight by the factor in the same horizontal row under the new metal. Example: A sterling silver ring weighs 8 grams, what will it weigh in 14kt.? 3. Along the horizontal row marked Stg in the first column under the heading 14 Kt we find 1.25 x 8 = 10 grams, weight in 14 Kt.

HOW TO FIND THE WEIGHT OF AN ARTICLE IN A METAL DIFFERENT FROM THAT IN WHICH IT IS NOW MADE:

F.G. 1.11 1.00 0.91 0.78 0.67 0.59 0.58 0.54 0.54 22kt 1.22 1.10 1.00 0.86 0.73 0.65 0.65 0.60 0.59 18kt 1.42 1.28 1.16 1.00 0.85 0.76 0.75 0.69 0.68 1.90 1.71 1.56 1.34 1.14 1.01 1.00 0.93 0.92 14kt 1.66 1.50 1.36 1.17 1.00 0.89 0.88 0.81 0.80

Pt.

1.00 0.90 0.82 0.70 0.60 0.53 0.53 0.49 0.48

Pt.

WEIGHT COMPARISON CHART


F.G. 22kt 18kt 14kt 10kt

9kt

F.S.

Stg

10kt 1.88 1.69 1.54 1.32 1.13 1.00 0.99 0.92 0.90 9kt Stg F.S. 2.04 1.84 1.68 1.44 1.23 1.09 1.08 1.00 0.99 2.07 1.87 1.70 1.46 1.25 1.11 1.09 1.01 1.00 OUNCE 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5

INCH MILLIMETER (DECIMAL) (MM) 0.051 1.291 0.047 1.191 0.045 1.149 0.040 1.024 0.036 0.912 0.031 0.812 0.031 0.795 0.028 0.723 0.025 0.644 0.023 0.573 0.020 0.511 0.018 0.455 0.016 0.405 0.016 0.396 0.014 0.360 0.013 0.321 0.011 0.286 0.010 0.255 0.0089 0.226 0.0080 0.200 0.0071 0.180 0.0063 0.160 0.0056 0.142 0.0050 0.130 0.0045 0.114 0.0040 0.100

L A C Y WE ST SUPP LIES LTD. 604-669-5229

DWT 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330

PENNYWEIGHT

TOLL FREE 1-800-6 6 7-4 11 8

GRAM 15.550 31.104 46.655 62.207 77.759 93.311 108.862 124.414 139.966 155.518 171.069 186.621 202.173 217.725 233.276 248.828 264.380 279.932 295.483 311.035 326.587 342.139 357.690 373.242 388.794 404.346 419.897 435.449 451.001 466.553 482.104 497.656 513.208

TO

OUNCES
DWT 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 640 650 660

OUNCE 17 17.5 18 18.5 19 19.5 20 20.5 21 21.5 22 22.5 23 23.5 24 24.5 25 25.5 26 26.5 27 27.5 28 28.5 29 29.5 30 30.5 31 31.5 32 32.5 33

TO

GRAMS

GRAM 528.760 544.311 559.863 575.415 590.967 606.518 622.070 637.623 653.174 668.725 684.277 699.829 715.381 730.932 746.484 762.036 777.588 793.139 808.691 824.243 839.795 855.346 870.898 886.450 902.002 917.553 933.105 948.657 964.209 979.760 995.312 1010.864 1026.300

Visa or MasterCard Number ____________________________________ Expiry Date ____________ Name of Card Holder ______________________________________ Address of Card Holder ________________________________________________________________ ____________________________________________________________________________________ Name/Phone of Issuing Bank _________________________________ Security Code (3-digit) _______ _______________________________________________________________________________________ OFFICE USE ONLY: Approved by ____________ Approved Amount __________ Date _______

Guarantee to Lacy West Supplies Ltd. Please read and sign the following: In the event of an over 90-day account, the applicant agrees to reimburse Lacy West Supplies Ltd. through a Visa or MasterCard, and the applicant authorizes Lacy West Supplies Ltd. to recover the balance of the account in full with this Visa or MasterCard. Signature of Principal/Partner ______________ Print Name ___________________ Date ________ Signature of Witness _____________________ Print Name ___________________ Date ________

Terms of Credit Net 30 Days Accounts are due and payable 30 days after the date on which Lacy West Supplies Ltd. issues its monthly statement with respect to the goods purchased. A service charge of 2% per month will be applied on the amount of any overdue account from the date the account becomes overdue. Credit privileges may be suspended on accounts 60-days overdue.

Amount of Credit Requested __________________

Credit References in the Jewellery Trade 1. ________________________________ Fax: __________________ Phone: ________________ 2. ________________________________ Fax: __________________ Phone: ________________ 3. ________________________________ Fax: __________________ Phone: ________________

Names of Principals or Partners of Company 1. _______________________________________________ Phone: _______________________ 2. _______________________________________________ Phone: _______________________ 3. _______________________________________________ Phone: _______________________

BC PST# R_____________ Please read and sign the following: This agreement applies to all individuals and companies using their BC PST number to purchase goods and supplies from Lacy West Supplies Ltd. In using your PST number, you are agreeing that the goods and supplies you purchase are for resale. In the event of any discrepancy, the undersigned agrees that Lacy West Supplies Ltd. will not be held accountable for these taxes. Signature of Principal/Partner ______________ Print Name ___________________ Date ________

Company Name ______________________________________________________ Contact Name(s) _____________________________________________________ Phone(s) _______________________________________ Fax ______________________ Email ____________________________________________ Billing Address __________________________________________________________ ________________________________________________Postal Code ____________ Shipping Address ________________________________________________________ ________________________________________________ Postal Code____________

Credit Application Lacy West Supplies Ltd. #102 480 Smithe Street, Vancouver, BC, Canada V6B 5E4 Tel: 604-669-5229, Fax 604-628-4480, Toll Free: 800-667-4118 lacy@lacywest.com www.lacywest.com

You might also like