Professional Documents
Culture Documents
47pt
www.huawei.com
Huawei Confidential
Huawei Confidential
Page 2
Select the subrack no. and slot no. of the interface board to which the BTS will connect. For example, it should be an FG2a working in IP mode. Right click the interface board and then click Add Site.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3
Fill in the parameters according to the planned data. BTS IP = BTS traffic IP; BSC IP = BSC IP that connect to this BTS
This project has some naming rules of BTS in the next page. Please obey them.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4
Huawei Confidential
Page 5
Huawei Confidential
Page 6
This step is just for the BTS that use APM30 cabinet. Right click SRN 7, SN 0, and then click Add PMU.
Huawei Confidential
Page 7
Add boards according to the planned data. This page is showing the APM30 cabinet. For Virtual cabinet, there is only Subrack 0.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 8
Huawei Confidential
Page 9
Fill the parameters according to the planned data. This project has some naming rules of RXUCHAIN in the next page. Please obey them. *For more than 1 RXUCHAIN, please repeat these two steps.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 10
10
Rules of RXUCHAIN
Huawei Confidential
Page 11
11
Right click RXUCHAIN on which the MRRU board will be. Click Add -> Add MRRU.
Huawei Confidential
Page 12
12
Fill the parameters according to the planned data. Is Configure Check Threadhold = YES Forward Bandwidth = 125 Receive Bandwidth = 250 Power Bandwidth = CLASS0 This project has some naming rules of MRRU in the next 2 page. Please obey them. *For more than 1 MRRU board, please repeat these 2 steps.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 13
13
Subrack No. = 60 + CPRIPort + (Position - 1)*6 Slot No. = 0 RXU Chain No. = CPRIPort Position = 1 + cascadeNo.
Huawei Confidential
Page 14
14
Huawei Confidential
Page 15
15
Adjust BTSRXUBP
MRRU/GRRU Second Receive Mode = DOUBLE_ANTENNA Configure Working Standard according to the planned area.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 16
16
17
BTS Basic Attrbutes -> BTS -> BTS Description BTS description = BTS name-siteLocation:
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
125GHI-Ghimpati
Page 18
18
Configure BTSESN
Configure BTSESN according to the actual data. 1. Click + 2. Fill in the esn 3. Click
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 19
19
Configure BTSIPCLKPARA
Clock Protocol Type = PTP Clock Synchronizaton Mode = INTERSYN Domain = 0 Configure IP address according to the planned area.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 20
20
Configure BTSIPRT
BTS Transmission Link -> IP BTS Route Destination IP address is the ip segment of MBSC Port IP Destination address mask is the mask of MBSC Port IP Forward route address is the gateway of BTS traffic IP
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 21
21
Single click the BTS icon Right click on the right panel, click Add Cell
Huawei Confidential
Page 22
22
Huawei Confidential
Page 23
23
Huawei Confidential
Page 24
24
25
26
27
Fill the Logical TRX No. according to the planned data Select TRX Board; select TRX Board Channel For the BCCH Frq, please check the checkBox in front of the Main BCCH Click Bind TRX to bind frequency to trx channel.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 28
28
Set Cell Hop Mode and HSN according to the planned data Click Apply If you want to modify the maio, please double click on the little cell like the blue circle.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 29
29
30
Cell Attributes -> Basic GPRS Attributes of 2G Cell Configure GPRS, NO and Routing Area according to the planned data
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 31
31
32
Configure GTRXDEV
Power Type = 20W --Adjust this value according to the planned date Shut Down Enabled = DISABLE TCH Rate Adjust Allow = YES Allow Dynamic Shutdown TRX = NO
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 33
33
Configure GTRXCHAN
Set Channel Type to PDTCH of Channel No. 6 of the Main BCCH TRX --According to the planned data
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 34
34
Transport -> MBSC -> GSM -> GB -> PTP BVC Configure PTP BVC according to the planned data
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 35
35
Add AdjNode
Transport -> MBSC -> GSM -> Abis -> Adjacent Node Add adjnode according to the planned data Adjacent Node Name = BTS Name
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 36
36
Add AdjMap
Transport -> MBSC -> GSM -> Abis -> Adjacent Node Mapping Gold user TRMMAP index = 43 Factor table index =20
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 37
37
Add IP Path
Transport -> MBSC -> GSM -> Abis -> IP Path Add IP path according to the planned data
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 38
38
Add IP Route
Transport -> MBSC -> GSM -> Abis -> IP Route Fill the Subrack No. and Slot No. according to the planned data. Destination IP address is the ip segment of BTS traffic IP Destination address mask is the mask of BTS traffic IP Forward route address is the gateway of BSC port IP
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 39
39
Huawei Confidential
Page 40
40
Click the link. You can open the folder contains the MML script.
Huawei Confidential
Page 41
41
Thank you
www.huawei.com
42