Professional Documents
Culture Documents
IMPLEMENTATION GUIDE
FOR
IrDA Standards
IrDA Standards
July 1996
__________________________________________________________________________________
Describe the setup of the testing environment and equipment (i.e. calibration).
2
500 mW/cm**2 at -15 degrees
Using a jitter free sequence
of IR pulses, what is the
jitter in the electrical
equivalent of those pulses (<200ns)
Minimum delay after transmit
that the receiver receives
error free (<10ms)
Note any additional features of the specification have you included in the applicant product.
_____________________________________________________________________________________
IrDA Link Access Protocol (IrLAP) Implementation (Mandatory)
_____________________________________________________________________________________
IrDA Link Management Protocol (IrLMP) Implmentation (Mandatory):
Yes No
Minimal Implementation Only
Exclusive Mode
Primary/Secondary Exchange
Sniffing
Connectionless Data Tx
Connectionless Data Rx
IAS Client
GetInfoBaseDetails
GetObjects
GetValue
GetValueByClass
GetObjectInfo
GetAttributeNames
IAS
3
GetInfoBaseDetails
GetObjects
GetValue
GetValueByClass
GetObjectInfo
GetAttributeNames
_____________________________________________________________________________________
IrDA Plug and Play (IrPnP) Implementation (Optional):
Implemented YES NO
Specification Version ________
DeviceID
Name
Manufacturer
Category
Version
Status
CompCnt
Comp#00
Comp#01
Comp#02
Comp#03
Extend as appropriate.
_____________________________________________________________________________________
IrDA Tiny Transport Protocol (TinyTP) Implementation (Optional):
4
_____________________________________________________________________________________
INTEROPERABILITY
List other IrDA devices with which the applicant device has
been demonstrated to interoperate.
List other IrDA devices with which the applicant device has
failed to be interoperable. Where possible document your diagnosis
of the failure.
____________________________________________________________________________________
TESTING AND QUALITY ASSURANCE
Briefly describe why you believe this device is compatible with the
IrDA standard. What methods have been used to ensure IrDA Compliance?