Professional Documents
Culture Documents
LUBRICATION SPECIFICATIONS
-
ITEM FORO PART NO. PART NAME FORO SPECIFICATIONS
ENGINE CRANKCASE OILS by ASTM committee D2 for Section If it is necessary to use an "MS"
G-IV of technical committee Band oil which is not certified by the mar-
Use of SAE IOW-30 oil will pro- are published in the SAE Handbook. keter as having passed the Engine
vide the proper viscosity for all nor-
These tests cover oil characteristics Operating Sequence Tests, the ad-
mal ranges of outside temperatures. as follows: dition of Rotunda Oil Conditioner
For operation at sustained outside Sequence I-Low Temperature Wear to the oil will satisfy the requirements.
temperatures below -100 F. a 5W-
Prevention-(Cold Starts) Rotunda 6,000 Mile Motor Oil
20 oil should be used.
SequenceII-High-Speed-High Tem- meets these requirements.
Oil Quality perature Wear Prevention.
SequenceIII-High Temperature De- Oil Filter
Use only oils which have been posit Formation-(Varnish)
tested and certified by the maker as Sequence IV -Corrosion and Rust Use of the right oil filter is also
satisfying automobile manufacturers Prevention essential to good engine life and op-
specifications for Engine Operating Sequence V-Sludge Formation eration. For 6,OOO-milefilter change
Sequence Tests for Service M.S. If engine oils are used which do intervals, filters must meet Ford
The Ford Motor Company specifi- not meet these requirements, it will Specification ES-COAE-6714-A.
cation covering these tests is ESE be necessary to change oil more The Genuine Rotunda Oil Filter
M2CIOI-A. These tests are defined frequently than every 6,000 miles. meets this requirement.
21-2 GROUP 21 LUBRICATIONCHART
I
BRAKE LINES
AND LINING
A FRONT SUSPENSION
Yl005-B
TRANSMISSION BANDS
REACH (AUT()MATIC)
UPPER
~\
I - -
I TRANSMISSION
REARAXLE
I I (MANUAL)
.
BRAKE LINES
AND LINING
A FRONT SUSPENSION
Yl004.~