Tolerance Charts - References of the Tolerance. (Reference) Diameter Hoh Ies Range and / or of applicabi sketch eH (=1 mm Tolerance (reference) thickness 5 mm 19 mm 25 mm the nominal 19 mm rnrn with a Surface of the or must be less than or to 7% of the nominal thickness and the contours must be smooth.
Tolerance Charts - References of the Tolerance. (Reference) Diameter Hoh Ies Range and / or of applicabi sketch eH (=1 mm Tolerance (reference) thickness 5 mm 19 mm 25 mm the nominal 19 mm rnrn with a Surface of the or must be less than or to 7% of the nominal thickness and the contours must be smooth.
Tolerance Charts - References of the Tolerance. (Reference) Diameter Hoh Ies Range and / or of applicabi sketch eH (=1 mm Tolerance (reference) thickness 5 mm 19 mm 25 mm the nominal 19 mm rnrn with a Surface of the or must be less than or to 7% of the nominal thickness and the contours must be smooth.