Professional Documents
Culture Documents
Contents
Page
11
Aluminum motors
11
Steel motors
81
113
147
Global motors
167
Brake motors
193
219
Integral motors
237
General information
General information
Standards
ABB motors are of the totally enclosed and open drip
proof, single or three phase squirrel cage type, built
to comply with international IEC and EN standards.
Motors conforming to other national and international
specications are also available on request.
All production units are certied to ISO 9001 international quality standard as well ISO 14000 environmental standard and conrm to all applicable EU
Directives.
IEC / EN
Electrical
Mechanical
IEC/EN 60034-1
IEC/EN 60034-2
IEC 60034-8
IEC 60034-12
IEC 60072
IEC/EN 60034-5
IEC/EN 60034-6
IEC/EN 60034-7
IEC/EN 60034-9
IEC 60034-14
2-pole
Boarderline
EFF2/EFF3
EFF1/EFF2
76.2
78.5
81.0
82.6
84.2
85.7
87.0
88.4
89.4
90.0
90.5
91.4
92.0
92.5
93.0
93.6
93.9
82.8
84.1
85.6
86.7
87.6
88.6
89.5
90.5
91.3
91.8
92.2
92.9
93.3
93.7
94.0
94.6
95.0
Output
kW
EFF2/EFF3
EFF1/EFF2
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
76.2
78.5
81.0
82.6
84.2
85.7
87.0
88.4
89.4
90.0
90.5
91.4
92.0
92.5
93.0
93.6
93.9
83.8
85.0
86.4
87.4
88.3
89.2
90.1
91.0
91.8
92.2
92.6
93.2
93.6
93.9
94.2
94.7
95.0
Foot-mounted motor.
IM B3
IM V5
IM V6
IM B6
IM B7
IM B8
IM 1001 IM 1011 IM 1031 IM 1051 IM 1061 IM 1071
A = foot-mounted,
term.box top
R = foot-mounted,
term.box RHS
L = foot-mounted,
term.box LHS
Flange-mounted motor,
large ange
IM B5
IM V1
IM V3
*)
*)
*)
IM 3001 IM 3011 IM 3031 IM 3051 IM 3061 IM 3071
B = ange mounted,
large ange
Flange-mounted motor,
small ange
C = ange mounted,
small ange
H = foot/ange-mounted,
term.box top
S = foot/ange-mounted,
term.box RHS
T = foot/ange-mounted,
term.box LHS
J = foot/ange-mounted,
small ange
Foot-mounted motor,
shaft with free extensions IM 1002 IM 1012 IM 1032 IM 1052 IM 1062 IM 1072
Cooling
Designation system concerning
methods of cooling refers to standard IEC 60034-6.
Example
IC
(A)
(A) 6
International Cooling
Circuit arrangement
0: Free circulation (open circuit)
4: Frame surface cooled
Primary coolant
A for air (omitted for simplied designation)
Method of movement of primary coolant
0: Free convection
1: Self-circulation
6: Machine-mounted independent component
Secondary coolant
A for air (omitted for simplied designation)
W for water
Method of movement of secondary coolant
0: Free convection
1: Self-circulation
6: Machine-mounted independent component
8: Relative displacement
protection of the machine against ingress of solid foreign objects. Protection of machines against the harmful
effects due to the ingress of water
IK code :
Classication of degrees of protection provided by enclosure for
motors against external mechanical
impacts.
IP
Characteristic letter
Degree of protection to persons and to parts of the motors inside the enclosure
2: Motors protected against solid objects greater than 12 mm
4: Motors protected against solid objects greater than 1 mm
5: Dust-protected motors
6: Dust-tight motors
Degree of protection provided by the enclosure with respect
to harmful effects due to ingress of water
3: Motors protected against spraying water
4: Motors protected against splashing water
5: Motors protected against water jets
6: Motors protected against heavy seas
IK
08
IK 05
0.7
IK 06
1
IK 07
2
IK 08
5
IK 09
10
IK 10
20
ABB
Standard
Insulation
ABB uses class F insulation systems, which, with
temperature rise B, is the most common requirement
among industry today.
Speed r/min
2-pole
4-pole
M3AA 90-100
M3AA 112-200
M3AA 225-280
6000
4500
3600
6000
4500
3600
Validity
Measures mentioned in Figure 2 apply to the applicable motors within the General motors range (not high-output
versions) with ACS 800 and ACS 550 drives with uncontrolled DC-voltage. For other alternatives and converter
types, please contact ABB.
Figure 2. Selection rules for insulation and ltering in variable speed drives
Motor nominal power PN or frame size
PN < 100 kW
PN 100 kW or IEC 315
UN 500 V
Standard motor
Standard motor
+ Insulated N-bearing
Standard motor
+ Insulated N-bearing
+ Common mode lter
UN 600 V
Standard motor
+ dU/dt-lter
OR
Reinforced insulation
Standard motor
+ dU/dt-lter (reactor)
+ Insulated N-bearing
OR
Reinforced insulation
+ Insulated N-bearing
Standard motor
+ Insulated N-bearing
+ dU/dt-lter
+ Common mode lter
OR
Reinforced insulation
+ Insulated N-bearing
+ Common mode lter
UN 690 V
Reinforced insulation
+ dU/dt-lter
Reinforced insulation
+ dU/dt-lter (reactor)
+ Insulated N-bearing
Reinforced insulation
+ Insulated N-bearing
+ dU/dt-lter
+ Common mode lter
Insulated Bearings
Bearings with insulated inner or outer races are used as the standard
solution. So-called hybrid bearings, i.e. bearings with non-conductive
ceramic balls, can also be used in special applications. More
information for spare part selection is available on request.
Figure 3. Motor loadability with ACS 600 and ACS 800, Field weakening point 50 Hz.
10
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
Mechanical design................................ 12
Rating plates ......................................... 22
Ordering information ............................ 23
Technical data ....................................... 24
Variant codes ........................................ 46
Dimension drawings ............................ 53
Accessories .......................................... 74
Aluminum motors in brief .................... 77
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
11
Mechanical design
Stator
Stator framework, bearing shields and feet are made
of an extra corrosion resistant aluminum alloy with low
copper content with the following exceptions:
M2AA 180-250 and M3AA 250 SMA-2 basic version,
have cast iron feet.
M3AA 280 has feet and D-end shield of cast iron.
Drain holes
12
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Terminal box
Sizes 56 to 180 and M2AA 200
The terminal box is made of aluminum alloy and is
located on top of the stator. The lower part of the box is
integrated with the stator. It is provided with 2 knockout
openings on each side. Sizes 160-180 also have a third
smaller opening. Cable glands are not included.
Connections
The terminal block is provided with
6 terminals for connecting Cu-cable. The terminals are marked in
accordance with IEC 60034-8.
Connection openings
Motor
size
Opening
56-63
Knock-out opening
71-80
Knock-out opening
90-100
112-132
160-180
200 1)
200-250 2)
280
Knock-out opening
Knock-out opening
Knock-out opening
Knock-out opening
2 x FL 13
2 x FL 21
1)
M2AA
2)
Metric
cable entry
Method of
connection
Terminal
bolt size
Maximum
connectable
Cu-cable
area, mm2
1 x M16 x 1.5
1 x Pg 11
2 x M20 x 1.5
2 x Pg 16
2 x (M25 + M20)
2 x (M25 + M20)
2 x (2 x M40 + M16)
2 x (2 x M40 + M16)
1 x (2 x M40 + M16)
1 x (2 x M63 + M16)
Screw terminal
M4
2.5
Screw terminal
M4
Screw terminal
Cable lug
Cable lug
Cable lug
Cable lug
Cable lug
M4
M5
M6
M6
M10
M10
6
10
35
35
70
70
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
13
Bearings
The motors are provided with bearings according to the
tables below.
Alternative designs:
Version with roller bearings
56
63
71
80
90
100
112 2)
112 2)
132 2)
132 2)
160
180
200 1)
200
225 1)
225
250 1)
250
280
280
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6306-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6208-2Z/C3
6309-2Z/C3
6310-2Z/C3
6312-2Z/C3
6312/C3
6313/C3
6313/C3
6315/C3
6315/C3
6315/C3
6316/C3
1)
2)
M2AA
short:
long:
short
long
short
long
2-pole
4-8 pole
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6205-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6209-2Z/C3
6209-2Z/C3
6209-2Z/C3
6210/C3
6210/C3
6212/C3
6212/C3
6213/C3
6213/C3
6213/C3
D-end
N-end
90
100
160
180
200
225
250
280
280
NU 205
NU 306
NU 309 ECP
NU 310 ECP
NU 312 ECP
NU 313 ECP
NU 315 ECP
NU 315 ECP
NU 316 ECP
D-end
058
N-end
059
90
100
112 2)
112 2)
132 2)
132 2)
160 1)
180 1)
200 1)
225 1)
250 1)
280
280
7205 B
7306 B
7206 BE
7206 BE
7208 BE
7208 BE
7309 BE
7310 BE
7312 BE
7313 BE
7315 BE
7315 BE
7316 BE
7204 B
7205 B
7205 BE
7206 BE
7206 BE
7208 BE
7209 BE
7209 BE
7210 BE
7212 BE
7213 BE
7213 BE
7213 BE
1)
2)
14
2-pole
4-8 pole
short
long
short
long
2-pole
4-8 pole
M2AA
short:
on request
M2AA 112: M-2,M-4; M2AA 132: SA-2, SB-2, S-4, M-4
M3AA 112: M-6, M-8; M3AA 132: SA-2, S-4, S-6, MA-6,
MB-6, S-8, M-8, S-two-speed
long:
remaining versions
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Transport locking
Motors provided with roller bearings or angular contact
ball bearings are tted with a transport lock to prevent
damage to the bearings, due to vibration, during
transport.
Axially-locked bearings
The table below shows which of the motors bearings
are axially locked in the bearing seat. In motor sizes 56
to 80 the locking is done by an inner bearing circlip, in
motor sizes 90 to 280 by an inner bearing cover.
1)
Flange-mounted motors
Motor
size
Foot-mounted
motors
Large ange
Small ange
56-63
71-80
90-100
112-132
160-280
On request at D-end
On request at D-end
D-end 1)
D-end 1)
D-end
On request at D-end
D-end
D-end 1)
D-end
D-end
On request at D-end
On request at D-end
D-end 1)
D-end
Lubrication
The motors are delivered with bearing grease for use at
normal temperatures in dry or humid environments.
The motors are lubricated for ambient temperatures
40C and in some cases even above 40C, see table 1
next page.
Motor sizes 63-180 and M2AA 200 are provided with
shielded bearings. On request, motor sizes 90 to 180
and M2AA 200 are provided with grease nipples for
regreasing, see variant code 041 under the heading
Bearings and lubrications.
Motor sizes 200-280, except M2AA 200, are provided
with grease nipples for re-greasing as standard.
Lubrication intervals and grease quantities are specied on a plate on the motor as well as in the manual
supplied with the motor.
The grease lifetime L10, suitable for permanent lubricated bearings, is dened as the number of operating
hours after which 90 per cent of the bearings are adequately lubricated. 50 per cent of the bearings achieve
two times this gure. Maximum lifetime, however,
should be regarded as 40000 hours.
In case of high ambient temperatures the shaft loads
must be reduced compared to permissible loadings in
the table (see pages 18 to 21), please contact ABB.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
15
Table 1: Grease lifetime L10 in deep groove ball bearings of type 2Z in horizontally mounted motors in continuous running duty.
Motor
56-63
71
80
90
100
112
132
160
180
M2AA
200
r/min
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
25 C
Basic
High
40000
40000
40 C
Basic
High
40000
40000
40000
40000
40000
70 C
Basic
High
40000
80 C
Basic
High
27000
40000
37000
40000
32000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
30000
24000
40000
32000
24000
40000
19000
29000
40000
27000
37000
32000
40000
40000
40000
40000
40000
40000
40000
30000
40000
40000
40000
40000
40000
40000
40000
35000
21000
33000
40000
30000
40000
33000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
35000
35000
24000
40000
40000
40000
31000
26000
40000
40000
40000
40000
38000
38000
34000
40000
40000
34000
38000
40000
40000
27000
40000
27000
38000
40000
20000
38000
22000
30000
40000
17000
25000
25000
30000
29000
20000
40000
30000
40000
40000
31000
22000
40000
26000
27000
40000
40000
23000
30000
17000
15000
40000
36000
14000
40000
31000
17000
21000
40000
35000
35000
35000
40000
14000
37000
30000
30000
20000
28000
40000
40000
11000
22000
19000
24000
36000
40000
27000
33000
40000
37000
40000
32000
9000
15000
20000
10000
15000
30000
8000
In vertically mounted motors, the grease lifetime is half the gures above.
For applications corresponding to the empty cells in the table, please contact ABB. These applications can imply reduced lifetime for bearings and winding.
Motors with roller bearings (optional) have considerably shorter grease life. For continuous operation regreasing nipples should be considered.
Lubrication intervals
ABB follows the L1-principle in
dening lubrication interval. That
means that 99% of the motors are
sure to make the interval time. The
lubrication intervals can also be
calculated according to the L10principle, which are normally douFrame Amount
size
of
grease
g
Ball bearings:
180
30
200
40
225
50
250
60
280
35
280
70
16
3600
3000
1800
1500
1000
r/min
r/min
r/min
r/min
r/min
6000
4000
3000
2500
2000
-
500750
r/min
23000
21000
20000
18000
17000
1000
r/min
500750
r/min
10000
8500
8000
7500
7000
11500
10500
10000
9000
8500
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
where:
D
=
P
=
n
=
K
=
FR
diameter of pulley, mm
power requirement, kW
motor speed, r/min.
belt tension factor, dependent on belt type and
type of duty. A common value for V-belts is
K = 2.5
= permissible radial force according to the tables
Bearing life
The nominal life is dened as the number of hours that
are attained or exceeded by 90% of identical bearings,
in a large test series, under certain specied conditions.
50% of the bearings attain a life of as much as 5 times
this gure.
50 Hz
60 Hz
25,000
21,000
40,000
33,000
63,000
52,000
80,000
67,000
Motor
size
56
63
71
X
FR = FX0 - E (FX0 - FXmax)
80
90
1001)
1)
Length
of shaft
No. of extension
poles E (mm)
2
4
6
8
2
4
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
240
300
340
340
490
490
490
680
680
680
680
630
930
930
930
1010
1010
1010
1010
2280
2280
2280
2280
20
20
20
20
23
23
23
30
30
30
30
40
40
40
40
50
50
50
50
60
60
60
60
200
200
280
280
400
400
400
570
570
570
570
750
750
750
750
810
810
810
810
1800
1800
1800
1800
260
280
340
340
490
490
490
680
680
680
680
930
930
930
930
1010
1010
1010
1010
2280
2280
2280
2280
200
200
280
280
400
400
400
570
570
570
570
750
750
750
750
810
810
810
810
1800
1800
1800
1800
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
17
Ball bearings
Basic design with deep
groove ball bearings
Roller bearings
Alternative design
with roller bearings
25,000 hrs
25,000 hrs
Motor
size
No. of
poles
Length
40,000 hrs
of shaft 25,000 hrs
extention
E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
112 M
60
1800
1420
1620
1280
2160
1700
2160
1700
60
1790
1410
1590
1250
2160
1700
2160
1700
60
1910
1510
1700
1340
2160
1700
2160
1700
60
1940
1530
1720
1360
2160
1700
2160
1700
60
1820
1470
1640
1330
2100
1700
2100
1700
60
1770
1430
1560
1260
2100
1700
2100
1700
60
1880
1520
1650
1340
2100
1700
2100
1700
60
1930
1560
1690
1370
2100
1700
2100
1700
132 SA
80
3020
2360
2740
2140
4070
3180
3670
2870
132 SB
80
3020
2360
2730
2130
4060
3170
3670
2870
132 SC
80
3030
2430
2750
2200
3990
3200
3690
2960
132 S
80
3120
2440
2790
2180
4090
3200
3830
2990
132 M
80
3080
2410
2750
2150
4100
3200
3780
2950
132 MB
80
3050
2440
2710
2170
3990
3200
3740
3000
132 S
80
3280
2560
2910
2270
4100
3200
3990
3120
132 MA
80
3240
2530
2880
2250
4100
3200
3970
3100
132 MB
80
3200
2500
2840
2220
4100
3200
3930
3070
132 MC
80
3010
2510
2660
2220
3840
3200
3700
3090
132 S
80
3370
2630
2980
2330
4100
3200
4100
3200
132 M
80
3310
2590
2940
2300
4100
3200
4060
3170
132 MB
80
3280
2630
2910
2330
3990
3200
3990
3200
160 MA
110
4470
3500
4470
110
4470
3500
110
4470
110
110
112 MB
Alternative design
with 63-series bearings
160 M
160 L
160 LB
180 M
18
40,000 hrs
FX0 (N)
FXmax(N)
40,000 hrs
FX0 (N)
FXmax(N)
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4380
3500
4380
3500
4380
3500
4380
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4380
3500
4380
3500
4380
3500
4380
3500
110
4380
3500
4380
3500
4380
3500
4380
3500
110
6900
5550
6360
5110
7338
5900
7340
5900
110
7100
5710
6470
5200
7338
5900
7340
5900
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Ball bearings
Basic design with deep
groove ball bearings
Roller bearings
Alternative design
with roller bearings
Motor
size
Length
of shaft 25,000 hrs
40,000 hrs
25,000 hrs
40,000 hrs
No. of extention
poles E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
180 L
110
7050
5670
6410
5150
7340
5900
7340
5900
110
7340
5900
6840
5500
7340
5900
7340
5900
110
7340
5900
6930
5570
7340
5900
7340
5900
110
6900
5550
6360
5110
7340
5900
7340
5900
110
6990
5670
6350
5150
7280
5900
7280
5900
110
7280
5900
6780
5500
7280
5900
7280
5900
110
7280
5900
6870
5570
7280
5900
7280
5900
110
7000
5800
6300
5200
9100
7500
8100
6700
110
6700
5500
5900
4900
9500
7800
8600
7100
110
4940
4070
4370
3600
9460
7790
9460
7790
110
5360
4410
4690
3860
9460
7790
9460
7790
110
5590
4600
4850
3990
9460
7790
9460
7790
110
5680
4680
4910
4040
9460
7790
9460
7790
110
4930
4060
4360
3590
9460
7790
9460
7790
110
5290
4360
4630
3810
9460
7790
9460
7790
110
5510
4540
4780
3940
9460
7790
9460
7790
110
5670
4670
4890
4030
9460
7790
9460
7790
110
4920
4050
4360
3590
9460
7790
9460
7790
110
5380
4430
4640
3820
9460
7790
9460
7790
140
5830
4930
5100
4320
9810
8300
9810
8300
140
6400
5420
5550
4700
9810
8300
9810
8300
110
5400
4530
4780
4010
10600
8900
10600
8900
140
5750
4870
5030
4260
9810
8300
9810
8300
140
6000
5080
5200
4400
9810
8300
9810
8300
140
6320
5350
5470
4630
9810
8300
9810
8300
110
5370
4510
4750
3990
10600
8900
10600
8900
140
5720
4840
5000
4230
9810
8300
9810
8300
140
5930
5020
5130
4340
9810
8300
9810
8300
140
6180
5230
5320
4500
9810
8300
9810
8300
140
6970
5620
6180
4980
11290
9100
11290
9100
140
7693
6200
6750
5440
14330
11550
14330
11550
140
7978
6430
6940
5590
14330
11550
14330
11550
140
8250
6650
7150
5760
14330
11500
14330
11550
140
6960
5610
6150
4960
11290
9100
11290
9100
140
7620
6140
6680
5380
14330
11550
14330
11550
140
7940
6400
6900
5560
14330
11550
14330
11550
140
8180
6590
7070
5700
14330
11550
14330
11550
140
6650
5400
5850
4750
15260
12400
13790
11200
140
7750
6300
6890
5600
18460
15000
16560
13450
140
8810
7100
7760
6250
21090
17000
18860
15200
140
9000
7250
7880
6350
21840
17600
19360
15600
140
6460
5250
5720
4650
15260
12400
13790
11200
140
7510
6100
6590
5350
17850
14500
16060
13050
180 LB
M2AA 200
M3AA 200 MLA
225 SMC
250 SMA
250 SMB
280 SMA
280 SMB
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
19
FAD
AD
Mounting arrangement IM B3
Motor
size
56
63
71
80
90
100
112 M
112 MB
132 SA
132 SB
132 SC
132 S
132 M
132 MA
132 MB
132 MC
160 MA
160 M
160 L
160 LB
180 M
180 L
180 LB
200 MLA
200 MLB
200 MLC
225 SMA
225 SMB
225 SMC
250 SMA
250 SMB
280 SMA
280 SMB
20
20,000 hours
2-pole
FAD
FAZ
N
N
470
790
985
1305
1360
2805
1500
1530
2570
2570
2520
4730
4730
5240
4240
4660
4660
3050
3050
3050
3440
3440
4180
4180
5000
5000
230
390
485
705
930
1945
1500
1530
2570
2570
2520
4730
4730
5240
4240
4660
4660
3050
3050
3050
3440
3440
4180
4180
5000
5000
4-pole
FAD
FAZ
N
N
520
865
1070
1420
1490
3075
1600
1600
2770
2750
2680
5230
5220
5050
4950
4870
4870
3850
3850
4340
4340
4340
5260
5260
6200
6100
280
465
570
820
1070
2215
1600
1600
2770
2750
2680
5230
5220
5050
4950
4870
4870
3850
3850
4340
4340
4340
5260
5260
6200
6100
6-pole
FAD
FAZ
N
N
540
1135
1505
1590
3260
1730
1720
2950
2940
2910
2830
5220
5050
4720
5200
5200
4400
4400
4400
4960
4960
6020
6020
7100
-
300
635
905
1165
2400
1730
1720
2950
2940
2910
2830
5220
5050
4720
5200
5200
4400
4400
4400
4960
4960
6020
6020
7100
-
8-pole
FAD
N
540
895
1130
1540
1635
3355
1750
1760
3040
3020
2940
5240
5220
4720
4720
5370
5370
4850
4850
5460
5460
5460
6630
6630
7350
-
F
FAZ
FAZ
N
300
495
630
940
1210
2495
1750
1760
3040
3020
2940
5240
5220
4720
4720
5370
5370
4850
4850
5460
5460
5460
6630
6630
7350
-
40,000 hours
2-pole
4-pole
FAD
FAZ
FAD
N
N
N
430
720
900
1185
1225
2540
1320
1340
2260
2260
2210
4220
4220
4650
4650
4250
4250
2430
2430
2430
2730
2730
3320
3320
4500
4400
190
320
400
585
800
1680
1320
1340
2260
2260
2210
4220
4220
4650
4650
4250
4250
2430
2430
2430
2730
2730
3320
3320
4500
4400
470
780
970
1285
1335
2760
1390
1390
2440
2420
2340
4640
4630
4470
4500
4390
4390
3050
3050
3440
3440
3440
4180
4180
5400
5300
FAZ
N
6-pole
FAD
N
FAZ
N
8-pole
FAD
N
FAZ
N
230
380
470
685
915
1900
1390
1390
2440
2420
2340
4640
4630
4470
4500
4390
4390
3050
3050
3440
3440
3440
4180
4180
5400
5300
480
1020
1350
1415
2910
1500
1490
2580
2570
2550
2460
4630
4470
4740
4710
4710
3500
3500
3500
3940
3940
4780
4780
6250
-
240
520
750
990
2050
1500
1490
2580
2570
2550
2460
4630
4470
4740
4710
4710
3500
3500
3500
3940
3940
4780
4780
6250
-
480
895
1015
1375
1450
2985
1510
1520
2650
2630
2560
4640
4630
4740
4740
4850
4850
3850
3850
4340
4340
4340
5260
5260
6500
-
240
495
515
775
1025
2125
1510
1520
2650
2630
2560
4640
4630
4740
4740
4850
4850
3850
3850
4340
4340
4340
5260
5260
6500
-
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
FAD
Mounting arrangement IM V1
Motor
size
56
63
71
80
90
100
112 M
112 MB
132 SA
132 SB
132 SC
132 S
132 M
132 MA
132 MB
132 MC
160 MA
160 M
160 L
160 LB
180 M
180 L
180 LB
200 MLA
200 MLB
200 MLC
225 SMA
225 SMB
225 SMC
250 SMA
250 SMB
280 SMA
280 SMB
20,000 hours
2-pole
FAD
FAZ
N
N
470
790
998
1320
1390
2855
2290
2340
3550
3560
3550
4940
4960
5520
5540
4990
5040
3600
3600
3600
4140
4140
5020
5020
5950
5950
230
380
470
685
900
1890
2170
2170
3370
3360
3270
4520
4500
4960
4940
4330
4280
2500
2500
2500
2740
2740
3330
3330
4050
4050
4-pole
FAD
FAZ
N
N
520
875
1085
1445
1525
3135
2490
2520
3910
3910
3880
5500
5560
5420
5400
5390
5470
4580
4580
5230
5230
5230
6380
6380
7380
7380
270
455
555
790
1035
2155
2330
2300
3630
3590
3460
4960
4880
4680
4500
4350
4270
3120
3120
3440
3440
3440
4150
4150
5010
5010
6-pole
FAD
FAZ
N
N
540
1150
1530
1625
3320
2680
2700
4160
4180
4180
4110
5540
5420
5170
5770
5810
5280
5280
5280
6030
6030
7440
7440
8540
-
290
620
880
1130
2340
2510
2480
3880
3850
3780
3690
4900
4680
4280
4630
4590
3530
3530
3530
3900
3900
4610
4610
5660
-
8-pole
FAD
N
540
905
1145
1565
1670
3420
2770
2790
4320
4330
4260
5520
5540
5170
5170
5930
5980
5720
5720
6530
6530
6530
8050
8050
8810
-
FAZ
N
290
485
615
915
1180
2425
2590
2570
3990
3930
3840
4960
4900
4280
4280
4810
4760
3980
3980
4400
4400
4400
5210
5210
5890
-
40,000 hours
2-pole
4-pole
FAD
FAZ
FAD
N
N
N
430
725
910
1200
1255
2590
2030
2080
3160
3170
3160
4430
4450
4930
4950
4580
4630
2970
2970
2970
3430
3430
4160
4160
5450
5450
190
310
385
565
770
1625
1910
1910
2980
2970
2880
4010
3990
4370
4350
3920
3870
1870
1870
1870
2030
2030
2470
2470
3550
3550
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
470
790
985
1310
1370
2820
2190
2220
3460
3450
3430
4910
4970
4840
4950
4910
4990
3780
3780
4330
4330
4330
5290
5290
6580
6580
FAZ
N
6-pole
FAD
N
FAZ
N
8-pole
FAD
N
FAZ
N
230
370
455
655
880
1840
2030
2000
3180
3130
3010
4370
4290
4100
4050
3870
3790
2320
2320
2550
2550
2550
3060
3060
4210
4210
480
1035
1375
1450
2970
2350
2360
3660
3670
3680
3610
4950
4840
5190
5280
5320
4370
4370
4370
5010
5010
6200
6200
7690
-
240
505
725
955
1990
2180
2140
3380
3340
3280
3190
4310
4100
4300
4140
4100
2620
2620
2620
2870
2870
3360
3360
4810
-
480
810
1030
1400
1485
3050
2410
2430
3780
3790
3730
4920
4950
5190
5190
5410
5460
4720
4720
5400
5400
5400
6680
6680
7960
-
240
390
500
750
990
2060
2230
2210
3450
3390
3310
4360
4310
4300
4300
4290
4240
2980
2980
3270
3270
3270
3840
3840
5040
-
21
Rating plates
Single-speed motors of size 56 to 132 are stamped
with 50 and 60 Hz at voltage code S and D. The current
rating for each voltage range is specied on the rating
plate. It represents the highest current that can exist
within the voltage range at the rated output. The power
factor and speed specied on the rating plate apply at
400 V 50 Hz and 460 V 60 Hz.
Motor sizes 56 to 71
Motor sizes 80
ABB
3~MotorM3AA 132M
3G AA 132024-ADC
Cl. F
IP 55
IEC 60034-1
No.
V
660-690
Hz r/min
50 1450
kW
7,5
8,4
cos
0,87
380-420
50 1450
7,5
14,6
0,87
440-480
60 1750
8,6
14,3
0,87
6208-2Z/C3
6208-2Z/C3
59
kg
22
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
The product code of the motor is composed in accordance with the following example.
Motor type
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
Motor size
A
D, E, F
A
B
C
D
E
F
M3AA 112 MB
4
IM B3 (IM 1001)
5.5 kW
3GAA 112002-ACD
Motor type
Motor size
Product code
Code for mounting
arrangement
Voltage and frequency code
Generation code
followed by variant codes
=
=
=
=
=
=
=
56
63
71
80
90
100
112
13 =
16 =
18 =
20 =
22 =
25 =
28 =
132
160
180
200
225
250
280
Position 7
Pole pairs
1 = 2 poles
2 = 4 poles
3 = 6 poles
4 = 8 poles
5 = 10 poles
6 = 12 poles
7 = > 12 poles
8 = Two-speed motors
9 = Multi-speed motors
Position 12
Mounting arrangement
A = Foot-mounted motor
B = Flange-mounted motor.
Large ange with clearance holes.
C = Flange-mounted motor.
Small ange with tapped holes.
F = Foot- and ange-mounted motor.
Special ange.
H = Foot- and ange-mounted motor.
Large ange with clearance holes.
J = Foot- and ange-mounted motor.
Small ange with tapped holes.
N = Flange-mounted (CI ring ange FF)
P = Foot-and ange-mounted motor
(CI ring ange FF)
V = Flange-mounted motor. Special ange.
Positions 8 to 10
Running number
Position 11
- (dash)
Position 13
Voltage and frequency: See tables below
Position 14
Version A,B,C... =
Generation code followed by variant codes
Code letters for supplementing the product code - single speed motors
Motor
size
H
50 Hz
E
50 Hz
F
50 Hz
T
50 Hz
U
50 Hz
500 VY
660 V1)
690 V1)
660 V
690 V
660 V
690 V
Other rated
voltage,
connection
or frequency,
690 V
maximum
56-100
220-240 V
380-420 VY
440-480 VY
380-420 V
660-690 VY
440-480 V
-
500 V1)
112-132
220-240 V
380-420 VY
440-480 VY
380-420 V
660-690 VY
440-480 V
-
415 V
500 V
160-280
220, 230 V
380,400,415 VY 440 VY
380,400,415V
660, 690 VY
440 V
-
415 V
500 V
500 VY
500 VY
) On request.
D
380-400 V
380-400 V
400 V
H
400-415 V
400-415 V
415 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
E
500 V
500 V
500 V
23
Output
kW
Motor type
Product code
Speed
r/min
Efciency
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Torque
Basic design
0.09
0.12
M2VA
M2VA
56 A
56 B
3GVA
3GVA
051 001-A
051 002-A
2820
2840
59.8
67.2
53.3
63.8
0.69
0.64
0.32
0.41
3.9
4.1
0.31
0.41
2.9
3.2
2.7
2.8
0.18
M2VA
63 A
3GVA
061 001-A
2820
73.7
70.6
0.64
0.56
4.2
0.62
3.5
3.1
0.25
M2VA
63 B
3GVA
061 002-A
2810
77.5
75.8
0.71
0.66
4.5
0.87
3.6
3.3
0.37
M2VA
71 A
3GVA
071 001-C
2840
77.1
76.5
0.72
5.5
1.25
3.8
3.9
0.55
M2VA
71 B
3GVA
071 002-C
2830
79.2
78.2
0.76
1.35
5.7
1.86
3.6
3.7
0.75
M2VA
80 A
3GVA
081 001-B
2870
81.2
79.3
0.75
1.8
6.2
2.49
2.9
3.6
1.1
M2VA
80 B
3GVA
081 002-B
2850
81.4
79.5
0.78
2.5
6.1
3.69
2.3
3.5
1.5
M2AA
90 S
3GAA
091 001-E
2870
80.1
76.2
0.82
3.35
5.5
2.4
3.0
2.2
M2AA
90 L
3GAA
091 002-E
2880
83.6
83.9
0.87
4.37
7.0
7.5
2.7
3.0
M2AA
100 L
3GAA
101 001-E
2900
86.0
84.1
0.88
5.95
7.5
10
2.7
3.6
M2AA
112 M
3GAA
111 001-A
2850
86.0
86.0
0.91
7.4
7.5
13.4
2.8
3.0
5.5
M2AA
132 SA
3GAA
131 001-A
2855
86.0
86.0
0.88
10.5
6.8
18.3
2.7
3.6
7.5
M2AA
132 SB
3GAA
131 002-A
2855
87.0
87.0
0.90
13.9
7.2
25
3.2
3.8
11
2)
M2AA
160 MA
3GAA
161 111-A
2915
88.4
88.9
0.89
20.5
6.1
36
2.1
2.5
15
2)
M2AA
160 M
3GAA
161 112-A
2900
89.5
89.9
0.90
27
6.1
49.4
2.4
2.6
18.5
2)
M2AA
160 L
3GAA
161 113-A
2915
90.2
90.5
0.91
32.5
6.8
61
2.6
3.0
22
2)
M2AA
180 M
3GAA
181 111-A
2925
91.2
91.3
0.89
39
7.9
72
2.7
3.4
30
2)
M2AA
200 LA
3GAA
201 011-A
2945
92.0
92.0
0.88
53
7.9
97
3.0
3.7
37
2) 3)
M2AA
200 L
3GAA
201 012-A
2945
92.8
92.9
0.89
65
8.2
120
3.1
3.6
M2AA
225 M
3GAA
221 011-A
2940
93.0
93.0
0.88
80
7.7
146
2.8
3.0
M2AA
250 M
3GAA
251 011-A
2960
93.5
93.8
0.90
95
7.3
177
2.8
3.0
45
55
2)
24
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
Speed
A
r/min
Efciency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
380 V 50 Hz
0.09
M2VA
56 A
2805
58.6
0.72
0.32
2830
57.8
0.65
0.34
0.00011
3.2
48
0.12
M2VA
56 B
2825
69.2
0.68
0.4
2850
64.5
0.59
0.45
0.00012
3.4
48
0.18
M2VA
63 A
2815
74.6
0.69
0.53
2830
72.5
0.60
0.58
0.00013
3.9
54
0.25
M2VA
63 B
2800
78.5
0.75
0.64
2830
76.2
0.67
0.69
0.00016
4.4
54
0.37
M2VA
71 A
2830
77.3
0.75
2855
75.6
0.68
1.05
0.0004
5.5
58
0.55
M2VA
71 B
2820
80.2
0.81
1.31
2845
77.7
0.73
1.38
0.00045
6.5
58
0.75
M2VA
80 A
2850
82.2
0.80
1.73
2880
79.2
0.68
1.9
0.000722
60
1.1
M2VA
80 B
2830
81.1
0.84
2.47
2870
80.2
0.74
2.6
0.000763
11
60
1.5
M2AA
90 S
2850
79.7
0.88
3.4
2890
79.8
0.79
3.4
0.0019
13
63
2.2
M2AA
90 L
2860
83.0
0.89
4.6
2890
83.3
0.84
4.2
0.0024
16
63
M2AA
100 L
2890
86.0
0.90
6.15
2910
86.0
0.85
5.95
0.0041
21
65
M2AA
112 M
2830
85.0
0.92
7.8
2865
86.5
0.90
7.2
0.01
25
63
5.5
M2AA
132 SA
2840
85.0
0.90
10.9
2865
86.5
0.87
10.2
0.014
37
69
7.5
M2AA
132 SB
2850
86.0
0.91
14.7
2870
87.5
0.88
13.6
0.016
42
69
11
2)
M2AA
160 MA
2905
87.9
0.90
21.5
2920
88.7
0.88
20
0.039
73
73
15
2)
M2AA
160 M
2890
88.9
0.91
28.5
2905
89.8
0.90
26
0.047
84
73
18.5
2)
M2AA
160 L
2905
89.2
0.91
34.5
2925
90.4
0.90
31.5
0.053
94
73
22
2)
M2AA
180 M
2915
90.5
0.91
40.5
2930
91.4
0.87
38.5
0.06
111
75
30
2)
M2AA
200 LA
2940
91.4
0.89
56
2950
92.1
0.86
52
0.094
139
75
37
2) 3)
M2AA
200 L
2940
92.3
0.91
67
2950
92.9
0.88
63
0.115
170
75
M2AA
225 M
2940
93.2
0.89
83
2950
93.8
0.87
78
0.21
209
75
M2AA
250 M
2955
93.9
0.90
100
2965
94.3
0.88
93
0.31
277
74
45
55
2)
415 V 50 Hz
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
25
Output
kW
Motor type
Product code
Speed
r/min
Efciency
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Torque
Basic design
0.06
0.09
M2VA
M2VA
56 A
56 B
3GVA
3GVA
052 001-A
052 002-A
1340
1370
51.1
55.5
45.8
50.2
0.67
0.62
0.26
0.38
2.5
2.8
0.43
0.63
2.2
2.9
2.2
2.9
0.12
M2VA
63 A
3GVA
062 001-A
1400
63.7
58.4
0.59
0.46
3.1
0.82
2.6
2.6
0.18
M2VA
63 B
3GVA
062 002-A
1380
65.6
62.1
0.64
0.63
3.1
1.25
2.5
2.6
0.25
M2VA
71 A
3GVA
072 001-C
1410
70.4
69.1
0.71
0.74
4.3
1.71
2.7
2.9
0.37
M2VA
71 B
3GVA
072 002-C
1420
74.6
72.1
0.69
1.05
4.4
2.51
2.6
2.8
0.55
M2VA
80 A
3GVA
082 001-B
1390
75.3
73.1
0.76
1.4
4.6
3.75
2.6
2.9
0.75
M2VA
80 B
3GVA
082 002-B
1410
78.2
75.6
0.74
1.9
4.7
5.08
3.5
3.9
1.1
M2AA
90 S
3GAA
092 001-E
1410
77.5
76.4
0.81
2.59
5.0
7.5
2.2
2.7
1.5
M2AA
90 L
3GAA
092 002-E
1420
80.3
78.1
0.79
3.45
5.0
10
2.4
2.9
2.2
M2AA
100 LA
3GAA
102 001-E
1430
83.0
82.7
0.81
4.8
5.5
15
2.4
2.9
M2AA
100 LB
3GAA
102 002-E
1430
85.0
83.9
0.81
6.48
5.5
20
2.5
2.9
M2AA
112 M
3GAA
112 001-A
1435
84.5
85.5
0.80
8.6
7.0
27
2.8
3.0
5.5
M2AA
132 S
3GAA
132 001-A
1450
87.0
87.0
0.83
11.1
7.3
36
2.2
3.0
7.5
M2AA
132 M
3GAA
132 002-A
1450
88.0
88.0
0.83
14.8
7.9
49
2.5
3.2
11
2)
M2AA
160 M
3GAA
162 111-A
1460
89.1
89.8
0.81
22
6.5
72
2.7
2.6
15
2)
M2AA
160 L
3GAA
162 112-A
1460
90.4
91.0
0.82
29
7.1
98
2.7
3.3
18.5
2)
M2AA
180 M
3GAA
182 111-A
1460
91.1
91.5
0.81
36.5
7.6
121
3.1
3.5
22
2)
M2AA
180 L
3GAA
182 112-A
1460
91.8
92.3
0.82
42
7.9
143
3.0
3.8
30
2)
M2AA
200 L
3GAA
202 011-A
1470
92.0
92.1
0.80
59
7.8
195
3.0
3.4
37
2)
M2AA
225 S
3GAA
222 011-A
1475
92.8
93.0
0.85
68
6.8
240
3.0
3.1
45
2)
M2AA
225 M
3GAA
222 012-A
1475
93.0
93.1
0.84
84
8.1
291
3.5
3.2
55
2)
M2AA
250 M
3GAA
252 011-A
1475
93.7
94.3
0.84
98
6.8
356
2.5
2.6
2)
26
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
Speed
A
r/min
Efciency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
380 V 50 Hz
0.06
M2VA
56 A
1335
50.5
0.70
0.26
415 V 50 Hz
1360
49.9
0.63
0.28
0.00017
3.2
36
0.09
M2VA
56 B
1360
57.1
0.66
0.37
1390
54.9
0.58
0.4
0.00018
3.4
36
0.12
M2VA
63 A
1390
63.1
0.63
0.44
1400
62.5
0.55
0.49
0.00019
40
0.18
M2VA
63 B
1370
66.9
0.67
0.63
1400
64.3
0.59
0.67
0.00026
4.5
40
0.25
M2VA
71 A
1400
69.9
0.74
0.75
1420
69.2
0.67
0.77
0.00066
5.5
45
0.37
M2VA
71 B
1410
74.6
0.73
1.02
1430
73.4
0.65
1.1
0.00089
6.5
45
0.55
M2VA
80 A
1380
75.5
0.82
1.35
1400
73.8
0.68
1.55
0.001257
50
0.75
M2VA
80 B
1400
78.7
0.81
1.8
1410
76.0
0.67
2.05
0.001565
10.5
50
1.1
M2AA
90 S
1410
76.3
0.83
2.66
1430
77.7
0.76
2.6
0.0032
13
50
1.5
M2AA
90 L
1420
79.9
0.82
3.5
1430
80.3
0.77
3.45
0.0043
16
50
2.2
M2AA
100 LA
1430
83.0
0.83
4.83
1430
83.0
0.78
4.85
0.0069
21
64
M2AA
100 LB
1430
85.0
0.85
6.58
1430
85.0
0.77
6.55
0.0082
24
66
M2AA
112 M
1425
84.0
0.80
8.9
1440
85.0
0.75
8.8
0.015
27
56
5.5
M2AA
132 S
1445
86.0
0.85
11.5
1455
87.5
0.81
10.9
0.031
40
59
7.5
M2AA
132 M
1445
87.0
0.85
15.3
1455
88.0
0.81
14.5
0.038
48
59
11
2)
M2AA
160 M
1450
88.1
0.83
23
1465
89.2
0.79
22
0.067
75
62
15
2)
M2AA
160 L
1455
89.5
0.84
30
1465
90.5
0.80
29
0.088
92
62
18.5
2)
M2AA
180 M
1455
90.4
0.83
37.5
1465
91.2
0.79
36.5
0.102
110
64
22
2)
M2AA
180 L
1455
91.1
0.84
43.5
1465
91.9
0.81
41.5
0.127
128
64
30
2)
M2AA
200 L
1470
92.3
0.82
60
1475
92.6
0.77
58
0.225
177
67
37
2)
M2AA
225 S
1470
92.4
0.86
71
1475
93.2
0.83
67
0.35
216
68
45
2)
M2AA
225 M
1470
93.2
0.85
87
1475
93.8
0.82
83
0.41
237
68
55
2)
M2AA
250 M
1470
93.3
0.86
103
1475
94.1
0.84
95
0.5
286
66
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
27
Output
kW
Motor type
Product code
Speed
r/min
Efciency
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Torque
Basic design
1.1
1.5
M3VA
M3AA
80 C
90 L
3GVA
3GAA
081 313-B
091 312-E
2850
2900
82.8
85.9
82.6
86.5
0.85
0.87
2.25
3.2
8.1
7.7
3.69
5
4.2
2.7
3.5
3.6
2.2
M3AA
90 LB
3GAA
091 313-E
2880
85.8
87.1
0.87
4.4
7.4
7.3
3.0
3.6
M3AA
100 LB
3GAA
101 312-E
2920
87.6
87.5
0.86
5.9
10.0
9.9
3.9
4.9
M3AA
112 M
3GAA
111 022-C
2860
87.7
89.4
0.93
7.1
7.5
13.4
2.6
3.4
5.5
M3AA
132 SA
3GAA
131 023-C
2900
88.6
88.9
0.88
10.1
9.2
18.1
3.8
4.5
7.5
M3AA
132 SB
3GAA
131 024-C
2915
90.9
91.3
0.90
13.3
11.0
24.6
5.1
5.2
11
M3AA
160 MA
3GAA
161 101-C
2930
91.0
91.2
0.88
20
6.2
36
2.1
2.8
15
M3AA
160 M
3GAA
161 102-C
2920
91.3
91.7
0.90
26.5
6.4
49
2.3
2.7
18.5
M3AA
160 L
3GAA
161 103-C
2920
92.4
93.1
0.91
32
7.2
61
2.6
2.9
22
M3AA
180 M
3GAA
181 101-C
2930
92.8
93.3
0.89
38.5
7.2
71
2.7
3.0
30
M3AA
200 MLA
3GAA
201 001-C
2955
93.2
93.2
0.88
53
8.5
97
2.9
3.1
37
M3AA
200 MLB
3GAA
201 002-C
2950
93.6
93.7
0.89
64
7.2
120
2.3
2.9
45
M3AA
225 SMB
3GAA
221 001-C
2960
94.1
93.9
0.88
79
7.7
145
2.5
2.9
55
M3AA
250 SMA
3GAA
251 001-C
2970
94.2
93.8
0.89
95
7.9
177
2.4
3.0
75
90
M3AA
M3AA
280 SMA
280 SMB
3GAA
3GAA
281 001-C
281 002-C
2970
2970
94.7
95.4
94.4
94.8
0.90
0.90
127
152
8.2
8.3
241
290
2.7
2.7
3.2
3.4
1)
400 V 50 Hz
High-output design
0.37
M2VA
63 BB
3GVA
061 003-A
2800
73.6
73.1
0.81
0.9
3.5
1.29
2.3
2.2
0.68
M2VA
71 BB
3GVA
071 003-C
2800
78.9
77.4
0.82
1.59
5.2
2.33
3.2
3.3
0.75
M2VA
71 BC
3GVA
071 004-C
2800
78.5
77.9
0.85
1.7
5.1
2.57
3.1
3.2
1.5
2.7
4
5.5
9.2
11
22
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
80 C
90 LB
100 LB
112 MB
132 SBB
132 SC
160 LB
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
081 003-B
091 003-E
101 002-E
111 002-C
131 004-C
131 003-C
161 104-C
2840
2860
2900
2855
2840
2835
2920
82.4
80.7
85.0
86.5
86.8
87.0
92.0
82.2
83.5
84.3
86.5
88.3
87.0
93.0
0.83
0.86
0.86
0.93
0.92
0.93
0.91
3.16
5.7
8.1
9.9
16.8
19.6
38
5.5
7.0
7.5
7.3
8.5
8.0
6.9
5.13
9
13
18.4
31
37
72
2.8
2.6
2.7
2.6
3.3
3.2
2.3
3.1
3.0
3.6
3.5
3.6
3.3
2.9
30
M3AA
180 LB
3GAA
181 102-C
2945
93.7
94.0
0.89
53
7.8
97
2.7
3.0
45
M3AA
200 MLC
3GAA
201 003-C
2950
94.1
94.5
0.89
78
8.2
146
3.0
3.2
55
M3AA
225 SMC
3GAA
221 002-C
2960
94.5
94.6
0.89
95
7.3
177
2.8
3.0
M3AA
200 MLD
3GAA
201 004-C
2940
94.0
94.4
0.89
95
7.9
179
3.1
3.1
M3AA
250 SMB
3GAA
251 002-C
2970
94.7
94.4
0.90
127
8.2
241
2.7
3.2
55
1)
1)
1)
1)
1)
1)
1)
75
80
1)
M3AA
225 SMD
3GAA
221 003-C
2960
94.7
94.7
0.86
143
7.5
258
2.9
3.1
95
1)
M3AA
250 SMC
3GAA
251 003-C
2965
95.4
95.6
0.90
160
8.0
306
2.6
3.1
1)
2)
28
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
Speed
A
r/min
Efciency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
380 V 50 Hz
1.1
M3VA
80 C
2830
81.1
0.88
2.35
2870
81.2
0.80
2.35
0.001093
11
60
1.5
M3AA
90 L
2880
85.1
0.87
3.4
2910
85.9
0.84
3.1
0.0024
16
63
2.2
M3AA
90 LB
2860
85.1
0.88
4.5
2890
86.1
0.84
4.3
0.0027
18
63
M3AA
100 LB
2910
87.5
0.87
6.1
2930
87.7
0.83
5.8
0.005
25
62
M3AA
112 M
2860
86.7
0.93
7.6
2860
88.0
0.93
6.9
0.012
33
63
5.5
M3AA
132 SA
2900
88.6
0.89
10.7
2900
88.8
0.86
9.9
0.016
42
69
7.5
M3AA
132 SB
2915
90.5
0.90
13.9
2915
91.2
0.90
12.9
0.022
56
69
11
M3AA
160 MA
2915
90.8
0.89
20.5
2935
91.0
0.86
19.4
0.039
73
69
15
M3AA
160 M
2905
91.0
0.90
27.5
2925
91.4
0.89
25.5
0.047
84
69
18.5
M3AA
160 L
2910
92.0
0.91
33.5
2930
92.6
0.90
31
0.053
94
69
22
M3AA
180 M
2930
92.4
0.90
40.5
2945
93.0
0.88
37.5
0.077
119
69
30
M3AA
200 MLA
2955
93.0
0.89
55
2960
93.3
0.86
52
0.15
175
72
37
M3AA
200 MLB
2950
93.4
0.89
68
2955
93.7
0.87
63
0.18
200
72
45
M3AA
225 SMB
2955
94.0
0.89
82
2965
94.2
0.87
77
0.26
235
74
55
M3AA
250 SMA
2960
94.1
0.89
100
2970
94.2
0.88
92
0.49
285
75
75
90
M3AA
M3AA
280 SMA
280 SMB
2965
2965
94.6
95.3
0.90
0.89
134
158
2970
2970
94.7
95.4
0.89
0.91
123
148
0.57
0.59
375
390
75
75
1)
415 V 50 Hz
380 V 50 Hz
0.37
M2VA
63 BB
2790
71.6
0.84
0.92
2820
72.4
0.77
0.94
0.00036
4.9
54
0.68
M2VA
71 BB
2790
77.4
0.85
1.6
2810
77.4
0.78
1.63
0.00045
6.5
58
0.75
M2VA
71 BC
2790
76.0
0.87
1.75
2810
77.0
0.78
1.8
0.00045
6.5
58
1.5
2.7
4
5.5
9.2
M2VA
M3AA
M3AA
M3AA
M3AA
80 C
90 LB
100 LB
112 MB
132 SBB
2800
2840
2890
2835
2830
80.9
80.2
85.0
85.5
85.8
0.88
0.89
0.88
0.93
0.92
3.2
5.8
8.3
10.5
17.6
2820
2870
2910
2865
2850
83.2
80.6
85.0
87.5
87.4
0.81
0.83
0.84
0.92
0.93
3.1
5.7
7.8
9.5
16.2
0.001093
0.0027
0.005
0.012
0.02
11.5
18
25
33
50
60
68
68
63
69
1)
1)
1)
1)
415 V 50 Hz
11
1)
M3AA
132 SC
2815
86.5
0.93
21
2845
88.0
0.93
18.9
0.022
56
69
22
1)
M3AA
160 LB
2910
91.6
0.91
40
2925
92.4
0.90
37
0.058
100
69
30
M3AA
180 LB
2940
93.9
0.90
55
2950
93.8
0.87
52
0.092
137
70
45
M3AA
200 MLC
2945
94.0
0.89
82
2955
94.2
0.88
76
0.19
205
72
M3AA
225 SMC
2950
94.3
0.89
100
2965
94.7
0.88
92
0.29
260
74
M3AA
200 MLD
2)
0.2
215
55
55
1)
75
M3AA
250 SMB
2965
0.57
375
75
80
1)
M3AA
225 SMD
2)
0,3
275
74
95
1)
M3AA
250 SMC
2)
0,59
345
75
94.6
0.90
134
2970
94.7
0.89
123
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
29
Output
kW
Motor type
Product code
Speed
r/min
Efciency
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Torque
Basic design
1.1
1.5
M3AA
M3AA
90 L
100 LA
3GAA
3GAA
092 312-E
102 311-E
1420
1440
83.9
85.6
84.3
85.5
0.80
0.82
2.4
3.2
6.1
6.9
7.4
10
2.9
2.8
3.4
3.4
2.2
M3AA
100 LC
3GAA
102 313-E
1450
86.8
86.5
0.77
4.8
8.5
14.5
4.0
4.6
M3AA
112 MA
3GAA
112 021-C
1455
87.5
87.8
0.81
6.2
7.9
19.7
2.7
3.7
M3AA
112 M
3GAA
112 022-C
1455
88.3
88.6
0.76
8.6
8.5
26.3
3.3
4.3
5.5
M3AA
132 S
3GAA
132 023-C
1460
89.3
90.5
0.84
10.6
7.0
36.2
2.2
2.8
7.5
M3AA
132 M
3GAA
132 024-C
1450
90.3
91.0
0.87
14
7.8
49
2.2
3.1
11
M3AA
160 M
3GAA
162 101-C
1460
92.0
92.7
0.81
21.5
7.8
72
3.3
3.2
15
M3AA
160 L
3GAA
162 102-C
1460
91.8
92.5
0.82
29
8.1
98
3.0
3.6
18.5
M3AA
180 M
3GAA
182 101-C
1470
92.3
92.9
0.84
35
7.0
120
2.9
2.9
22
M3AA
180 L
3GAA
182 102-C
1470
93.1
93.9
0.85
40
7.1
143
3.1
3.3
30
M3AA
200 MLB
3GAA
202 001-C
1475
93.4
94.0
0.84
55
7.5
194
2.5
2.8
37
M3AA
225 SMA
3GAA
222 001-C
1480
93.6
93.8
0.84
68
7.6
239
3.1
3.3
45
M3AA
225 SMB
3GAA
222 002-C
1480
94.2
94.4
0.83
83
7.6
291
3.4
3.0
55
M3AA
250 SMA
3GAA
252 001-C
1480
94.6
94.9
0.86
98
7.6
355
3.1
3.0
75
M3AA
280 SMA
3GAA
282 001-C
1480
94.8
95.3
0.86
132
7.1
486
3.2
3.0
90
M3AA
280 SMB
3GAA
282 002-C
1475
95.0
95.3
0.87
157
7.7
583
3.3
3.2
400 V 50 Hz
High-output design
0.25
M2VA
63 BB
3GVA
062 003-A
1370
70.3
67.4
0.67
0.78
3.2
1.75
2.5
2.1
0.45
M2VA
71 BB
3GVA
072 003-C
1390
75.5
75.3
0.76
1.15
4.1
3.11
2.1
2.3
0.55
M2VA
71 C
3GVA
072 004-C
1410
77.3
76.9
0.73
1.45
4.8
3.74
2.7
2.9
0.95
M2VA
80 C
3GVA
082 003-B
1410
78.9
77.9
0.75
2.35
4.3
6.44
2.9
3.3
1.1
1.85
2.2
4
5.5
9.2
11
18.5
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
80 C
90 L
90 LB
100 LC
112 MB
132 MBA
132 MB
160 LB
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
082 004-B
092 003-E
092 004-E
102 003-E
112 002-C
132 004-C
132 003-C
162 103-C
1390
1390
1390
1420
1425
1445
1450
1450
74.7
79.5
80.3
81.0
84.5
87.8
88.8
90.5
76.6
78.1
81.0
81.7
85.5
89.2
89.9
92.0
0.77
0.80
0.83
0.82
0.83
0.87
0.86
0.84
2.8
4.4
4.85
8.65
11.4
17.5
21
36
4.3
4.5
4.5
5.5
7.1
7.2
7.7
6.6
7.8
13
15
27
37
61
72
122
3.1
2.2
2.2
2.5
2.8
2.7
2.5
2.6
2.3
2.4
2.4
2.8
3.1
2.7
2.5
3.0
M3AA
180 LB
3GAA
182 103-C
1465
92.5
93.3
0.84
56
6.8
196
2.5
2.8
M3AA
200 MLB
3GAA
202 002-C
1475
93.4
94.0
0.84
68
7.9
240
3.8
3.2
M3AA
200 MLC
3GAA
202 003-C
1470
93.6
94.1
0.84
89
8.1
311
4.4
3.2
M3AA
225 SMC
3GAA
222 003-C
1480
94.6
95.0
0.84
100
7.5
356
3.5
3.0
M3AA
225 SMD
3GAA
222 004-C
1475
94.2
94.5
0.85
132
8.1
473
3.9
3.2
M3AA
250 SMB
3GAA
252 002-C
1480
94.8
95.3
0.86
132
7.1
486
3.2
3.0
M3AA
250 SMC
3GAA
252 003-C
1475
94.8
95.5
0.88
165
7.3
616
2.7
3.1
30
1)
1)
1)
1)
1)
1)
1)
1)
37
48
1)
55
73
1)
75
95
1)
2)
1)
30
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
Speed
A
r/min
Efciency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
380 V 50 Hz
415 V 50 Hz
1.1
M3AA
90 L
1410
83.6
0.82
2.5
1430
84.4
0.78
2.4
0.0043
16
50
1.5
M3AA
100 LA
1430
85.4
0.84
3.2
1450
86.1
0.79
3.1
0.0069
21
54
2.2
M3AA
100 LC
1440
86.8
0.80
4.8
1460
86.9
0.74
4.8
0.009
25
54
M3AA
112 MA
1455
87.2
0.81
6.5
1455
87.8
0.80
6.1
0.018
34
56
M3AA
112 M
1455
87.9
0.77
9.0
1455
88.6
0.77
8.2
0.018
34
56
5.5
M3AA
132 S
1460
88.9
0.84
11.1
1460
89.1
0.84
10.3
0.038
48
59
7.5
M3AA
132 M
1450
89.9
0.87
14.7
1450
90.3
0.87
13.5
0.048
59
59
11
M3AA
160 M
1460
91.1
0.83
22.5
1470
91.6
0.82
20.5
0.067
94
62
15
M3AA
160 L
1455
91.8
0.84
30
1465
91.9
0.81
28
0.102
103
62
18.5
M3AA
180 M
1465
91.7
0.85
36
1470
92.2
0.83
34
0.161
124
62
22
M3AA
180 L
1465
92.7
0.86
42
1475
93.3
0.84
38
0.225
161
63
30
M3AA
200 MLB
1470
93.1
0.85
58
1475
93.5
0.84
54
0.34
205
63
37
M3AA
225 SMA
1475
93.6
0.84
72
1480
93.8
0.81
68
0.37
215
66
45
M3AA
225 SMB
1475
94.0
0.85
86
1480
94.2
0.81
82
0.42
230
66
55
M3AA
250 SMA
1475
94.4
0.86
103
1480
94.5
0.84
96
0.72
275
67
75
M3AA
280 SMA
1475
94.5
0.87
139
1480
94.8
0.86
128
0.88
380
67
90
M3AA
280 SMB
1470
95.0
0.89
164
1475
95.1
0.87
153
0.95
405
67
380 V 50 Hz
0.25
M2VA
63 BB
1360
70.9
0.71
0.76
1380
69.1
0.63
0.8
0.0003
40
0.45
M2VA
71 BB
1380
75.1
0.80
1.12
1400
74.0
0.72
1.2
0.00089
6.5
45
0.55
M2VA
71 C
1400
77.0
0.77
1.4
1420
76.1
0.69
1.5
0.0011
45
0.95
M2VA
80 C
1400
79.1
0.81
2.3
1430
76.4
0.66
2.65
0.001948
11
50
1.1
1.85
2.2
4
5.5
9.2
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
80 C
90 L
90 LB
100 LC
112 MB
132 MBA
1380
1380
1380
1410
1415
1445
74.3
78.8
78.4
80.0
84.5
88.0
0.82
0.83
0.85
0.82
0.85
0.87
2.7
4.4
5.1
8.8
11.7
18.4
1400
1400
1400
1420
1430
1445
74.1
79.5
80.8
82.0
85.5
88.3
0.72
0.76
0.80
0.75
0.79
0.87
2.9
4.35
4.9
8.7
11.4
16.8
0.001948
0.0043
0.0048
0.009
0.018
0.048
11
16
17
25
34
59
50
50
50
60
56
59
1)
1)
1)
1)
1)
415 V 50 Hz
11
1)
M3AA
132 MB
1445
88.2
0.87
22
1455
88.9
0.83
21
0.048
59
59
18.5
1)
M3AA
160 LB
1440
89.8
0.85
37
1450
90.8
0.83
34
0.102
103
63
30
1)
M3AA
180 LB
1465
92.2
0.85
58
1470
92.7
0.82
55
0.225
161
63
M3AA
200 MLB
1475
93.3
0.85
71
1475
93.3
0.82
67
0.34
205
63
M3AA
200 MLC
2)
0.38
270
63
M3AA
225 SMC
1475
0.49
265
66
M3AA
225 SMD
2)
0.56
290
66
M3AA
250 SMB
1475
0.88
335
67
37
48
1)
55
73
75
1)
94.3
94.5
0.84
0.87
105
1480
139
1480
94.6
94.8
0.82
0.86
99
128
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
31
Output
kW
Motor type
Product code
Speed
r/min
Efciency
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Torque
Basic design
0.09
0.12
M2VA
M2VA
63 A
63 B
3GVA
3GVA
063 001-A
063 002-A
910
910
47.1
57.5
42.5
54.0
0.56
0.58
0.51
0.54
2.1
2.1
0.95
1.27
2.1
2.1
2.1
2.1
0.18
M2VA
71 A
3GVA
073 001-C
920
61.1
57.7
0.69
0.64
2.9
1.88
2.1
2.2
0.25
M2VA
71 B
3GVA
073 002-C
920
64.9
62.3
0.65
0.86
3.2
2.61
2.5
2.7
0.37
M2VA
80 A
3GVA
083 001-B
925
72.9
70.8
0.72
1.04
3.8
3.82
3.1
3.4
0.55
M2VA
80 B
3GVA
083 002-B
925
73.3
71.9
0.71
1.55
3.4
5.68
2.9
3.1
0.75
M3AA
90 S
3GAA
093 001-E
930
71.5
70.7
0.67
2.36
4.0
7.5
1.9
2.3
1.1
M3AA
90 L
3GAA
093 002-E
930
74.4
72.5
0.69
3.25
4.0
11
2.1
2.4
1.5
M3AA
100 L
3GAA
103 001-E
950
80.0
77.0
0.71
3.92
4.5
15
1.9
2.3
2.2
M3AA
112 M
3GAA
113 001-C
940
80.5
81.0
0.74
5.4
5.6
22
2.1
2.7
M3AA
132 S
3GAA
133 001-C
960
84.5
84.8
0.75
6.9
6.5
30
2.1
3.0
M3AA
132 MA
3GAA
133 002-C
960
85.5
86.1
0.78
8.7
7.1
40
2.6
2.8
5.5
7.5
11
M3AA
M3AA
M3AA
132 MB
160 M
160 L
3GAA
3GAA
3GAA
133 003-C
163 101-C
163 102-C
955
970
970
86.0
89.3
89.8
87.0
90.4
90.5
0.78
0.79
0.78
11.9
15.4
23
7.0
6.6
6.9
55
74
109
2.8
1.9
2.1
2.8
2.6
3.4
15
M3AA
180 L
3GAA
183 101-C
970
90.8
91.5
0.78
31
6.8
147
2.0
3.3
18.5
M3AA
200 MLA
3GAA
203 001-C
985
91.1
91.7
0.81
36
7.0
180
2.7
2.5
22
M3AA
200 MLB
3GAA
203 002-C
980
91.7
92.2
0.81
43
6.8
214
2.9
3.0
30
37
45
M3AA
M3AA
M3AA
225 SMB
250 SMA
280 SMA
3GAA
3GAA
3GAA
223 001-C
253 001-C
283 001-C
985
985
985
92.8
93.4
93.4
93.0
93.7
93.7
0.83
0.83
0.84
56
69
83
7.4
7.2
7.2
290
358
436
3.2
3.2
3.2
2.8
2.9
2.8
1)
400 V 50 Hz
High-output design
0.15
M2VA
63 BB
3GVA
063 003-A
900
56.9
52.1
0.54
0.74
2.2
1.61
2.2
2.3
0.32
M2VA
71 C
3GVA
073 003-C
920
64.8
61.6
0.63
1.15
3.2
3.33
2.6
2.8
0.37
M2VA
71 C
3GVA
073 004-C
900
60.1
60.4
0.70
1.2
2.6
4.1
2.2
2.0
0.75
1.3
2.2
1)
M2VA
M3AA
M3AA
80 C
90 LB
100 LC
3GVA
3GAA
3GAA
083 003-B
093 003-E
103 002-E
920
910
940
67.9
69.0
77.0
70.5
69.0
72.8
0.76
0.71
0.71
2.1
3.85
5.9
3.4
4.0
4.5
8.1
13.5
22
2.4
1.9
1.9
2.2
2.2
2.3
1)
M3AA
112 MB
3GAA
113 002-C
935
80.0
81.2
0.76
7.2
5.5
31
2.5
2.7
6.3
1)
M3AA
132 MC
3GAA
133 004-C
960
84.9
85.0
0.75
14.5
7.3
63
2.3
3.1
14
1)
M3AA
160 LB
3GAA
163 103-C
960
89.8
90.1
0.77
29.5
7.0
138
2.5
3.1
18.5
1)
M3AA
180 LB
3GAA
183 102-C
965
90.7
91.7
0.79
37.5
6.1
183
2.1
2.5
30
1)
M3AA
200 MLC
3GAA
203 003-C
980
91.7
92.4
0.81
56
7.3
296
3.6
2.9
M3AA
225 SMC
3GAA
223 002-C
985
93.0
93.6
0.83
69
7.3
360
3.6
2.8
M3AA
250 SMB
3GAA
253 002-C
985
93.4
93.7
0.84
83
7.2
436
3.2
2.8
1)
37
45
1)
1)
32
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
Speed
A
r/min
Efciency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
380 V 50 Hz
0.09
M2VA
63 A
905
49.6
0.59
0.46
925
44.9
0.52
0.55
0.0002
38
0.12
M2VA
63 B
905
59.1
0.61
0.52
925
54.8
0.54
0.57
0.00027
4.5
38
0.18
M2VA
71 A
910
60.3
0.73
0.62
930
59.8
0.62
0.7
0.00063
5.5
42
0.25
M2VA
71 B
910
65.4
0.68
0.85
930
63.6
0.61
0.9
0.00081
6.5
42
0.37
M2VA
80 A
905
72.7
0.77
1.03
920
71.4
0.66
1.1
0.001842
47
0.55
M2VA
80 B
905
73.1
0.77
1.5
915
71.2
0.65
1.65
0.002176
10
47
0.75
M3AA
90 S
920
70.6
0.72
2.3
930
70.6
0.64
2.36
0.0032
13
44
1.1
M3AA
90 L
920
73.9
0.73
3.2
930
74.2
0.66
3.25
0.0043
16
44
1.5
M3AA
100 L
940
79.0
0.74
3.96
960
80.0
0.67
3.95
0.0082
23
49
2.2
M3AA
112 M
930
80.0
0.78
5.4
950
80.5
0.71
5.4
0.015
27
54
M3AA
132 S
955
84.0
0.77
7.1
965
84.0
0.72
6.9
0.031
39
61
M3AA
132 MA
955
85.0
0.81
8.9
965
85.5
0.75
8.7
0.038
46
61
5.5
7.5
11
15
18.5
22
30
37
45
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
132 MB
160 M
160 L
180 L
200 MLA
200 MLB
225 SMB
250 SMA
280 SMA
950
960
960
970
980
980
985
985
985
85.5
88.7
89.4
90.9
90.8
91.6
92.6
93.3
93.5
0.81
0.80
0.80
0.79
0.81
0.81
0.83
0.84
0.84
12.2
16.1
23.5
32
38
45
59
72
87
960
970
970
975
985
985
985
990
985
86.0
89.6
90.0
91.1
91.1
91.8
92.9
93.5
93.6
0.76
0.77
0.76
0.74
0.78
0.79
0.82
0.81
0.83
11.8
15.1
22.5
31
36
42
55
67
81
0.045
0.089
0.107
0.217
0.37
0.43
0.64
1.16
1.49
54
88
102
151
165
185
225
280
375
61
59
59
59
63
63
63
63
63
1)
415 V 50 Hz
380 V 50 Hz
0.15
M2VA
63 BB
895
55.9
0.59
0.71
915
53.9
0.52
0.8
0.00032
38
0.32
M2VA
71 C
910
65.6
0.67
1.1
930
63.3
0.59
1.2
0.0011
42
0.37
M2VA
71 C
880
59.1
0.75
1.25
920
59.8
0.66
1.2
0.0011
42
0.75
M2VA
80 C
900
66.9
0.80
2.1
930
67.6
0.72
2.2
0.002576
10
47
415 V 50 Hz
1.3
1)
M3AA
90 LB
900
69.0
0.75
3.8
920
69.0
0.67
3.9
0.0048
18
44
2.2
1)
M3AA
100 LC
930
76.0
0.75
5.9
940
77.0
0.67
5.9
0.009
26
49
1)
M3AA
112 MB
925
79.5
0.79
7.3
940
80.0
0.73
7.2
0.018
33
54
6.3
1)
M3AA
132 MC
960
84.8
0.75
14.5
965
84.6
0.71
14.4
0.049
59
61
14
1)
M3AA
160 LB
955
89.7
0.79
30.5
965
89.6
0.75
29.5
0.127
117
62
18.5
1)
M3AA
180 LB
965
90.1
0.81
39
970
90.9
0.78
36.5
0.237
160
59
30
1)
M3AA
200 MLC
980
91.5
0.83
57
985
91.9
0.83
52
0.49
200
63
M3AA
225 SMC
980
92.7
0.83
72
985
93.2
0.81
68
0.75
252
63
M3AA
250 SMB
985
93.5
0.84
87
985
93.6
0.83
81
1.49
320
63
37
45
1)
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
33
Output
kW
Motor type
Product code
Speed
r/min
Efciency
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Torque
Basic design
0.055
0.09
M2VA
M2VA
63 B
71 A
3GVA
3GVA
064 002-A
074 001-C
680
690
38.3
45.8
31.8
37.5
0.48
0.57
0.45
0.52
1.8
2.2
0.78
1.25
2.1
2.3
2.1
2.3
0.12
M2VA
71 B
3GVA
074 002-C
690
46.4
38.1
0.55
0.69
2.2
1.67
2.5
2.5
0.18
M2VA
80 A
3GVA
084 001-B
700
59.9
54.5
0.60
0.75
3.1
2.46
3.2
3.6
0.25
M2VA
80 B
3GVA
084 002-B
700
70.7
67.4
0.62
0.85
3.1
3.52
2.9
3.1
0.37
M3AA
90 S
3GAA
094 001-E
700
61.5
43.4
0.56
1.6
3.0
1.9
2.4
0.55
M3AA
90 L
3GAA
094 002-E
690
62.9
56.4
0.57
2.35
3.0
7.5
1.7
2.1
0.75
M3AA
100 LA
3GAA
104 001-E
700
72.0
63.6
0.59
2.55
3.5
10
2.1
2.7
1.1
M3AA
100 LB
3GAA
104 002-E
700
73.0
68.8
0.64
3.35
3.5
15
2.1
2.7
1.5
M3AA
112 M
3GAA
114 001-C
695
74.5
74.6
0.65
4.5
4.1
21
1.9
2.5
2.2
3
4
5.5
7.5
11
15
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
132 S
132 M
160 MA
160 M
160 L
180 L
200 MLA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
134 001-C
134 002-C
164 101-C
164 102-C
164 103-C
184 101-C
204 001-C
720
720
715
710
715
720
740
80.5
82.0
84.1
84.7
86.3
89.6
91.1
80.2
82.0
84.7
85.6
87.3
90.3
91.6
0.67
0.68
0.69
0.70
0.70
0.76
0.82
5.9
7.8
10
13.4
18.1
23.5
29
5.3
5.5
5.1
5.5
5.4
5.7
7.5
29
40
53
74
100
146
196
1.9
2.4
2.1
2.4
2.4
2.1
3.0
2.5
2.6
2.6
2.6
2.7
2.5
3.2
18.5
M3AA
225 SMA
3GAA
224 001-C
730
91.1
91.6
0.79
37
6.8
242
2.8
3.1
22
M3AA
225 SMB
3GAA
224 002-C
730
91.5
92.2
0.77
45
6.4
287
2.4
2.6
30
M3AA
250 SMA
3GAA
254 001-C
735
92.8
93.1
0.79
59
7.3
389
2.2
2.6
37
M3AA
280 SMA
3GAA
284 001-C
735
93.0
93.3
0.81
74
7.4
478
2.9
3.1
400 V 50 Hz
High-output design
0.18
M2VA
71 C
3GVA
074 003-C
680
51.3
49.9
0.61
0.8
2.2
2.6
2.5
2.2
0.37
0.75
1.5
1)
M2VA
M3AA
M3AA
80 C
90 LB
100 LC
3GVA
3GAA
3GAA
084 003-B
094 003-E
104 003-E
690
680
670
64.6
64.0
71.0
65.3
60.0
65.9
0.69
0.65
0.70
1.2
2.65
4.4
3.0
3.0
3.3
5.3
10
21
2.3
1.8
1.8
2.1
2.0
2.2
1.9
1)
M3AA
112 MB
3GAA
114 002-C
690
74.0
74.8
0.67
5.6
4.3
26.5
2.0
2.6
3.8
1)
M3AA
132 MB
3GAA
134 003-C
710
80.5
80.7
0.69
9.9
5.2
51
2.3
2.6
8.5
1)
M3AA
160 LB
3GAA
164 104-C
700
85.1
85.7
0.70
21
5.3
114
2.3
2.6
15
1)
M3AA
180 LB
3GAA
184 102-C
720
88.7
89.6
0.76
32.5
6.0
199
2.4
2.6
M3AA
200 MLB
3GAA
204 002-C
735
91.4
91.8
0.81
36
7.3
241
2.6
3.1
M3AA
225 SMC
3GAA
224 003-C
735
91.7
92.3
0.79
64
6.7
391
2.8
3.0
M3AA
250 SMB
3GAA
254 002-C
735
93.0
93.3
0.81
74
7.4
478
2.9
3.1
1)
18.5
30
37
1)
1)
34
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
Speed
A
r/min
Efciency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
380 V 50 Hz
415 V 50 Hz
0.055
M2VA
63 B
675
41.2
0.50
0.41
690
35.7
0.44
0.5
0.00027
4.5
36
0.09
M2VA
71 A
680
46.3
0.60
0.5
700
43.8
0.53
0.55
0.00063
5.5
40
0.12
M2VA
71 B
680
47.7
0.59
0.65
700
44.4
0.53
0.7
0.00081
6.5
40
0.18
M2VA
80 A
690
61.1
0.64
0.7
705
57.8
0.57
0.77
0.001842
45
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
132 M
160 MA
160 M
160 L
675
690
680
690
700
685
715
715
710
705
710
70.2
62.7
64.9
72.0
74.0
74.0
80.0
82.0
83.5
84.0
85.7
0.66
0.59
0.61
0.63
0.68
0.69
0.71
0.72
0.71
0.72
0.72
0.84
1.57
2.27
2.5
3.3
4.6
5.9
7.8
10.2
13.8
18.6
690
700
690
700
710
700
725
720
720
715
715
69.6
60.5
61.5
71.0
73.0
74.0
80.0
82.0
84.1
85.0
86.6
0.58
0.54
0.55
0.55
0.60
0.61
0.65
0.68
0.66
0.68
0.68
0.87
1.7
2.43
2.7
3.5
4.7
5.9
7.7
9.9
13.3
17.8
0.002176
0.0032
0.0043
0.0069
0.0082
0.016
0.038
0.045
0.072
0.091
0.131
10
13
16
20
23
28
46
53
75
88
118
45
43
43
46
46
52
56
56
59
59
59
11
M3AA
180 L
715
89.0
0.77
24.5
720
89.8
0.75
23
0.224
147
59
15
18.5
M3AA
M3AA
200 MLA
225 SMA
735
730
91.0
91.0
0.83
0.79
30
39
740
735
91.2
91.3
0.79
0.76
29
36
0.45
0.61
175
210
60
63
22
M3AA
225 SMB
730
91.0
0.81
47
735
91.7
0.76
44
0.68
225
63
30
M3AA
250 SMA
735
92.6
0.81
61
740
92.7
0.77
58
1.25
280
63
37
M3AA
280 SMA
735
92.5
0.82
77
735
92.8
0.81
73
1.52
375
63
380 V 50 Hz
0.18
M2VA
71 C
670
52.3
0.65
0.8
700
51.4
0.58
0.8
0.0011
40
0.37
M2VA
80 C
670
63.1
0.72
1.2
700
65.1
0.66
1.3
0.002576
11
45
415 V 50 Hz
0.75
1)
M3AA
90 LB
670
64.0
0.69
2.6
690
63.0
0.61
2.7
0.0048
18
43
1.5
1)
M3AA
100 LC
660
71.0
0.73
4.5
675
70.0
0.65
4.6
0.009
26
46
1.9
1)
M3AA
112 MB
680
73.8
0.71
5.9
695
73.6
0.65
5.8
0.018
33
52
3.8
1)
M3AA
132 MB
705
80.0
0.72
10
715
80.5
0.67
9.9
0.049
59
56
8.5
1)
M3AA
160 LB
695
84.6
0.73
21.5
705
85.3
0.68
20.5
0.131
118
62
15
1)
M3AA
180 LB
715
88.1
0.78
33.5
720
89.1
0.74
32
0.24
155
62
M3AA
200 MLB
735
91.2
0.83
37
735
91.6
0.79
35
0.54
200
60
M3AA
225 SMC
730
91.5
0.80
65
735
91.6
0.77
63
0.8
255
63
M3AA
250 SMB
735
92.5
0.82
77
735
92.8
0.81
73
1.52
320
63
18.5
30
37
1)
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
35
Output
kW
Motor type
Product code
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
90 L
90 LB
100 LB
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
200 MLB
200 MLC
225 SMC
250 SMB
250 SMC
Speed
r/min
Efciency
Power Current
Full
3/4
load
load
100% 75%
factor
cos
100%
Torque
IN
Is
TN
Ts
IN
Nm
TN
Moment
Sound
Tmax of inertia
pressure
J=1/4 GD2 Weight level LP
TN
kgm2
kg
dB(A)
400 V 50 Hz
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
091 312-C
091 313-C
101 312-C
111 022-C
131 023-C
131 024-C
161 121-C
161 122-C
161 123-C
181 121-C
201 021-C
201 022-C
221 021-C
251 021-C
251 022-C
2900
2880
2920
2860
2900
2915
2935
2940
2935
2945
2950
2960
2970
2970
2965
85.9
85.8
87.6
87.7
88.6
90.9
91.5
92.3
93.1
93.2
93.0
93.9
94.4
94.1
94.8
Basic design
86.5
87.1
87.5
89.4
88.9
91.3
91.9
92.7
93.6
93.8
93.3
94.1
94.4
94.1
95.0
0.87
0.87
0.86
0.93
0.88
0.90
0.90
0.90
0.89
0.91
0.90
0.89
0.88
0.91
0.93
3
4.4
5.9
7.1
10.3
13.3
19.2
26
32.5
37.5
52
64
78
93
124
7.7
7.4
10.0
7.5
9.9
11.0
7.4
8.0
8.3
7.1
7.9
8.8
6.9
7.5
7.7
5
7.3
9.9
13.4
18.1
24.6
36
49
60
71
97
120
145
177
242
2.7
3.0
3.9
2.6
4.0
5.1
2.7
3.0
3.1
2.7
3.0
3.6
2.3
2.5
2.3
3.6
3.6
4.9
3.4
4.5
5.2
2.9
3.3
3.3
2.9
2.9
3.3
2.9
3.0
2.8
400 V 50 Hz
0.002
0.002
0.005
0.012
0.016
0.022
0.047
0.053
0.058
0.092
0.18
0.19
0.29
0.57
0.6
16
18
25
33
42
56
84
94
100
137
200
205
260
330
345
63
63
62
63
69
69
69
69
69
70
72
72
74
75
75
Basic design
1.1
M3AA
90 L
83.9
84.3
0.80
2.4
6.1
7.4
2.9
3.4
0.004
16
50
1.5
M3AA
100 LA
85.6
85.5
0.82
3.2
6.9
10
2.8
3.4
0.006
21
54
2.2
M3AA
100 LC
86.8
86.5
0.77
4.8
8.5
14.5 4.0
4.6
0.009
25
54
M3AA
112 MA
87.5
87.8
0.81
6.2
7.9
19.7 2.7
3.7
0.018
34
56
M3AA
112 M
88.3
88.6
0.76
8.6
8.5
26.3 3.3
4.3
0.018
34
56
5.5
M3AA
132 S
89.3
90.5
0.84
10.6
7.0
36.2 2.2
2.8
0.038
48
59
7.5
M3AA
132 M
90.3
91.0
0.87
14
7.8
49
2.2
3.1
0.048
59
59
11
M3AA
160 M
91.5
92.1
0.83
21
8.1
72
3.4
3.3
0.091
94
62
15
M3AA
160 L
91.3
92.1
0.83
28.5
7.6
98
3.3
3.1
0.102
103
62
18.5
M3AA
180 M
92.5
93.4
0.84
34
6.6
121
2.7
2.8
0.191
141
62
22
M3AA
180 L
93.2
93.9
0.84
41
7.8
143
3.1
3.4
0.225
161
62
30
M3AA
93.7
94.3
0.84
55
8.0
194
4.0
3.1
0.34
205
63
37
M3AA
93.7
94.0
0.85
68
8.1
239
3.9
2.9
0.42
230
66
45
M3AA
94.4
94.8
0.86
80
8.0
291
3.8
3.2
0.49
265
66
55
M3AA
94.5
94.9
0.87
96
7.4
356
3.0
3.1
0.88
335
67
55
M3AA
94.5
94.8
0.86
98
8.5
355
4.3
3.8
0.56
290
66
75
M3AA
95.2
95.6
0.85
135
8.4
484
3.4
5.1
0.95
360
66
36
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output
kW
Motor type
Product code
Speed
r/min
Efciency
Power Current
Full
3/4
load
load
100% 75%
factor
cos
100%
Torque
IN
Is
TN
Ts
IN
Nm
TN
Moment
Sound
Tmax of inertia
pressure
J=1/4 GD2 Weight level LP
TN
kgm2
kg
dB(A)
400 V 50 Hz
Basic design
2.2
3
M3AA
M3AA
112 M
132 S
81.8
85.2
82.9
86.1
0.76
0.79
5.1
6.4
6.0
7.0
22.3 2.4
29.8 2.2
2.9
2.8
0.018
0.038
33
46
54
61
M3AA
132 MA
86.0
87.3
0.80
8.3
7.0
39.8 2.9
2.7
0.045
54
61
5.5
M3AA
132 MB
86.6
87.6
0.78
12
7.3
54
3.5
3.0
0.049
59
61
7.5
M3AA
160 M
89.9
90.6
0.77
15.6
7.8
74
2.4
3.3
0.107
102
59
11
M3AA
160 L
90.3
91.2
0.78
23
7.6
108
2.7
3.4
0.127
117
61
15
M3AA
180 L
91.4
91.9
0.75
31
8.3
147
2.8
3.9
0.237
160
59
18.5
M3AA
200 MLB
91.5
91.6
0.81
36
8.3
180
3.7
3.3
0.43
185
22
M3AA
200 MLC
92.1
92.5
0.82
42
8.3
214
4.0
3.0
0.49
200
30
M3AA
92.8
93.3
0.83
56
7.5
291
3.8
2.8
0.75
252
37
M3AA
93.6
93.9
0.82
69
8.3
358
4.1
2.6
1.49
320
400 V 50 Hz
Basic design
1.5
2.2
3
4
M3AA
M3AA
M3AA
M3AA
112 M
132 S
132 M
160 MA
3GAA
3GAA
3GAA
3GAA
695
720
715
720
74.0
80.2
80.2
84.6
75.4
80.4
81.0
85.7
0.69
0.67
0.70
0.69
4.1
5.9
7.8
9.8
4.0
5.4
5.2
5.0
20.8
29.2
40.1
53
1.6
1.9
2.1
2.1
2.2
2.7
2.5
2.5
0.018
0.045
0.049
0.091
33
53
59
88
5.5
M3AA
160 M
86.2
86.6
0.66
14.1
5.8
73
2.4
3.1
0.131
118
7.5
M3AA
160 L
85.9
86.9
0.70
18.2
5.4
100
2.1
2.7
0.131
118
11
M3AA
180 L
87.8
89.2
0.75
24
6.0
147
3.2
2.6
15
M3AA
200 MLB
91.0
91.7
0.81
29
7.9
195
3.2
3.3
0.54
200
18.5
M3AA
91.0
91.8
0.76
38
6.6
241
2.5
3.0
0.68
225
22
M3AA
91.3
91.9
0.75
46
7.1
286
3.0
3.3
0.8
255
30
M3AA
92.6
93.2
0.78
60
7.5
389
2.8
3.3
1.52
320
1)
114 022-C
134 023-C
134 024-C
164 121-C
On request.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
37
Output in kW
50 Hz
Product code
60 Hz
3GAA
Current in A1) at
Speed in r/min
380-420 V 440-480 V
50 Hz
60 Hz
380-420 V 440-480 V
50 Hz
60 Hz
380-420 V 440-480 V
50 Hz
60 Hz
4
4
5.5
5.5
5.5
7.5
7.5
9.2
11
4.6
4.6
6.4
6.4
6.4
8.6
8.6
10.6
12.6
4)
2)
HO
4)
4)
2)
2)
HO
HO
M2AA 112 M
M3AA 112 M
M3AA 112 MB
M2AA 132 SA
M3AA 132 SA
M2AA 132 SB
M3AA 132 SB
M3AA 132 SBB
M3AA 132 SC
111 001-A
111 022-C
111 002-C
131 001-A
131 023-C
131 002-A
131 024-C
131 004-C
131 003-C
7.8
7.6
10.5
10.9
10.7
14.7
13.9
17.6
21
7.7
7.4
10.4
11
10.7
14.4
13.8
17.3
20
2850
2860
2855
2855
2900
2855
2915
2840
2835
3450
3460
3455
3455
3500
3455
3515
3440
3445
0.91
0.93
0.93
0.88
0.88
0.90
0.90
0.92
0.93
0.91
0.93
0.93
0.88
0.87
0.90
0.89
0.92
0.93
M3AA 112 MA
M2AA 112 M
M3AA 112 M
112 021-C
112 001-A
112 022-C
6.5
8.9
9
6.4
8.6
8.6
1450
1435
1455
1750
1735
1755
0.81
0.80
0.76
0.8
0.81
0.76
M3AA 112 MB
112 002-C
11.7
11.6
1425
1725
0.83
0.83
M2AA 132 S
132 001-A
11.5
11.5
1450
1750
0.83
0.83
M3AA 132 S
132 023-C
11.1
11.1
1460
1760
0.84
0.84
M2AA 132 M
132 002-A
15.3
15.1
1450
1750
0.83
0.83
M3AA 132 M
132 024-C
14.6
14.3
1450
1750
0.87
0.86
3.5
4.6
4.6
4)
5.5
6.4
2)
5.5
6.4
4)
5.5
6.4
7.5
8.6
7.5
8.6
9.2
10.6
2)
HO
132 004-C
18.4
18.2
1445
1745
0.87
0.87
11
12.6
2)
HO
M3AA 132 MB
132 003-C
22
22
1450
1750
0.86
0.86
HO
4)
) Recalculation factors
Multiple by 1.73 when recalculating:
from 380-420 V to 220-240 V 50 Hz
from 440-480 V to 250-280 V 50 Hz
3
) Class F temperature rise
4
) High-output design.
5
) Efciency class eff2.
2
38
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Output in kW
50 Hz
60 Hz
Product code
Design 3) Motor type
3GAA
Current in A1) at
Speed in r/min
380-420 V 440-480 V
50 Hz
60 Hz
380-420 V 440-480 V
50 Hz
60 Hz
380-420 V 440-480 V
50 Hz
60 Hz
2.5
3.5
3.5
4.6
6.4
7.5
HO
HO
M3AA 112 M
M3AA 112 MB
M3AA 132 S
M3AA 132 MA
M3AA 132 MB
M3AA 132 MC
113 001-C
113 002-C
133 001-C
133 002-C
133 003-C
133 004-C
5.4
7.3
7.1
8.9
12.2
15.2
5.3
7.3
7.0
8.9
12.2
14.9
940
935
960
960
955
960
1140
1135
1160
1160
1155
1160
0.74
0.76
0.75
0.78
0.78
0.75
0.74
0.75
0.75
0.78
0.78
0.76
M3AA 112 M
M3AA 112 MB
M3AA 132 S
M3AA 132 M
M3AA 132 MB
114 001-C
114 002-C
134 001-C
134 002-C
134 003-C
4.6
6
5.9
7.8
10
4.4
6
5.9
7.8
10
695
685
720
720
710
845
835
870
870
860
0.65
0.67
0.67
0.68
0.69
0.65
0.66
0.66
0.68
0.69
1.7
2.3
2.5
3.5
4.4
HO
HO
) Recalculation factors.
Multiply by 1.73 when recalculating:
from 380-420 V to 220-240 V 50 Hz
from 440-480 V to 250-280 V 60 Hz
2
) Class F temperature rise.
3
) High-output design.
4)
Efciency class EFF2.
1
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
39
Motor type
Product code
Speed
r/min
Efciency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
0.65/0.14
M3VA 80 A
2860/1450
73.0/57.0 0.85/0.57
1.5/0.58 4.8/3.6
2.18/0.93 1.9/2
2.2/2.3
0.0008
0.95/0.2
M3VA 80 B
2850/1440
75.0/61.0 0.87/0.69
2.1/0.7
3.19/1.33 2/1.8
2.2/2.2
0.0009
11
1.1/0.25
M3VA 80 C
2860/1440
77.0/63.0 0.87/0.70
2.4/0.85 5.3/3.8
3.7/1.7
2/1.8
2.2/2
0.0012
12
1.4/0.22
M3AA 90 S
2870/1470
77.0/48.0 0.87/0.63
3/1.1
5.3/3.3
4.6/1.4
1.7/1
2.4/2.3
0.0019
13
1.9/0.3
M3AA 90 L
2880/1470
78.0/53.0 0.87/0.68
4/1.1
5.8/3.7
6.3/1.9
1.9/1
2.5/2.3
0.0024
16
2.5/0.4
M3AA 100 L
2900/1470
80.0/60.0 0.87/0.67
5.2/1.5
6.5/4.1
8.2/2.6
2.1/1
3/2.7
0.0041
21
3.5/0.6
M3AA 112 M
2895/1470
83.0/68.0 0.92/0.60
6.6/2.1
7/5.8
11.5/3.9
1.7/1.8
2.3/2.8
0.012
32
5.5/1
M3AA 132 S
2900/1470
84.0/64.0 0.88/0.65
10.8/3.5 7.8/5.7
18.1/6.5
2.4/2
2.9/2.8
0.016
42
7.4/1.2
M3AA 132 M
2875/1475
85.0/67.0 0.93/0.64
13.5/4.1 7.5/5.9
24.6/7.8
2.1/2
2.6/2.8
0.022
56
13/1.9
M3AA 160 M
2940/1470
88.5/79.5 0.92/0.79
23/4.4
7.8/6.4
42/12
2.1/2.1
3/2.5
0.054
92
17.5/2.5
M3AA 160 L
2925/1475
89.0/81.0 0.92/0.77
31/5.8
7.1/6.7
57/16
2/2.5
2.6/2.9
0.057
99
20/2.8
M3AA 180 M
2930/1465
89.0/77.0 0.90/0.77
36/6.9
6.4/5.8
65/18
2.1/1.9
2.4/2
0.094
132
25/3.6
M3AA 180 L
2940/1465
90.0/78.0 0.88/0.78
46/8.6
7.5/7.3
81/24
2.6/1.9
2.9/1.9
0.108
152
30/4.1
2945/1480
91.5/85.0 0.89/0.72
54/10
8/7.1
97/26
2.2/2.7
2.8/2.8
0.15
175
38/5.5
2945/1480
92.5/86.5 0.91/0.74
67/13
7.7/6.8
123/35
2.2/2.6
2.6/2.6
0.19
205
43/6
2950/1475
92.5/86.5 0.90/0.78
75/13
7.1/5.8
139/39
2.3/2.7
2.4/2
0.26
235
50/7
2955/1480
93.0/87.5 0.91/0.78
86/15
7.3/6.1
162/45
2.4/2.9
2.4/2.1
0.29
260
70/10
2965/1485
94.0/89.5 0.90/0.76
119/22
9.3/7.1
225/64
2.3/2.5
3.1/2.3
0.57
330
5/3.7
400 V 50 Hz
0.22/0.044
M3VA 63 A
2770/1420
65.0/50.0 0.76/0.65
0.65/0.2 3.6/3.5
0.75/0.29 2.1/2.4
2.2/2.5
0.00019
0.33/0.07
M3VA 63 B
2700/1380
53.0/45.0 0.82/0.77
1.1/0.3
2.7/2.7
1.17/0.49 1.6/2
1.7/2.1
0.00026
4.5
0.37/0.08
M3VA 71 A
2690/1460
64.0/42.0 0.92/0.47
0.9/0.6
3.3/4.3
1.31/0.52 1.8/2.1
1.9/2.2
0.00066
5.5
0.55/0.12
M3VA 71 B
2700/1470
67.0/55.0 0.91/0.42
1.3/0.75 3.8/3.4
1.94/0.78 1.4/2.2
1.5/2.2
0.00089
6.5
0.65/0.13
M3VA 71 C
2800/1400
69.0/50.0 0.85/0.44
1.6/0.85 4.1/3.5
2.2/0.88
1.5/2.3
1.6/2.4
0.0011
0.85/0.2
M3VA 80 A
2850/1440
77.0/65.0 0.85/0.64
1.9/0.7
2.86/1.33 2.1/2.3
2.3/2.6
0.0008
1.1/0.25
M3VA 80 B
2855/1450
79.0/68.0 0.84/0.63
2.4/0.85 5.3/4.2
3.7/1.65
2.3/2.5
2.5/2.7
0.0009
11
1.4/0.35
M3VA 80 C
2845/1440
79.0/70.0 0.85/0.67
3/1.1
5.4/4.4
4.7/2.32
2.3/2.4
2.4/2.6
0.0012
11
1.5/0.33
M3AA 90 S
2860/1460
77.0/66.0 0.87/0.67
3.3/1.1
5.2/3.9
5/2.1
1.8/1.1
2.4/2.1
0.0019
13
2.2/0.45
M3AA 90 L
2860/1460
80.0/73.0 0.88/0.65
4.6/1.4
5.9/4.4
7.3/2.9
2.1/1.2
2.6/2.3
0.0024
16
2.5/0.47
M3AA 90 LB
2860/1460
78.0/75.0 0.88/0.62
5.2/1.5
6.1/4.5
8.3/3.1
2.2/1.4
2.5/2.3
0.0027
18
3/0.6
M3AA 100 L
2880/1470
81.0/74.0 0.89/0.61
6.2/1.9
6.3/4.8
9.9/3.9
2.2/1.4
2.8/2.8
0.0041
21
4.5/1
M3AA 112 M
2875/1450
83.0/80.0 0.93/0.76
8.4/2.4
7/6
14.9/6.6
1.8/1.9
2.3/2.8
0.012
32
6.2/1.3
M3AA 132 S
2880/1455
84.0/80.0 0.91/0.67
11.8/3.5 7/6.5
20.6/8.5
2/2.6
2.6/3.3
0.016
42
8.3/1.7
M3AA 132 M
2875/1455
84.0/82.0 0.93/0.71
15.4/4.2 7.4/6.6
27.6/11.2 2.5/2.7
2.7/3.3
0.022
56
10/2
M3AA 160 MA
2910/1465
85.0/83.5 0.89/0.73
19/4.8
5.9/6.1
30/43
1.5/2.4
2.3/2.8
0.039
73
16/3.2
M3AA 160 M
2915/1465
87.5/86.5 0.92/0.76
28.5/7
6.6/6.3
52/21
1.8/2.5
2.4/2.8
0.054
92
19.5/4.5
M3AA 160 L
2930/1465
89.0/88.0 0.89/0.77
36/9.7
7.6/6.4
64/29
2.3/2.5
2.9/2.8
0.057
99
21.5/4.7
M3AA 180 M
2935/1465
90.0/88.0 0.91/0.77
38/10
7/5.3
70/28
2.1/2.1
2.6/2.3
0.094
132
26/5.2
M3AA 180 L
2940/1470
90.5/89.5 0.89/0.75
47/11
6.9/5.8
85/34
2.3/2.4
2.6/2.4
0.108
152
32/8
2940/1465
90.0/89.5 0.89/0.85
58/16
7.1/6.2
104/52
2/2
2.5/2.2
0.28
180
39/10
2950/1475
91.5/91.0 0.89/0.85
69/19
7.4/6.2
126/65
2/2
2.6/2.3
0.34
205
42/11
2950/1470
92.5/91.0 0.89/0.77
75/23
7.7/5.6
136/71
2.2/2.1
3/2.5
0.19
205
45/13
2955/1475
93.0/91.5 0.92/0.82
76/25
7.4/5.3
145/84
2/2
2.6/2.1
0.27
235
55/15
2955/1475
93.5/92.5 0.91/0.82
94/29
7.3/5.4
178/97
2/2
2.6/2.2
0.3
260
75/25
2965/1475
94.5/93.0 0.92/0.82
125/48
8.9/5.5
241/162
2.3/2
3.1/2.2
0.36
330
5/4.1
40
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Motor type
Product code
Speed
r/min
Efciency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
0.18/0.025
M3VA 71 A
1420/710
50.0/26.0 0.76/0.60
0.7/0.35
2.7/2.1
1.22/0.34 1.5/3.9
1.9/3.9
0.00066 5.5
0.3/0.05
M3VA 71 B
1400/700
54.0/34.0 0.80/0.60
1/0.45
2.7/2.1
2.1/0.69
1.5/2.8
1.7/2.8
0.00089 6.5
0.48/0.075
M3VA 80 A
1400/710
64.0/35.0 0.79/0.51
1.4/0.55
3.4/2.4
3.3/1
1.7/2.2
1.7/2.6
0.0013
0.63/0.1
M3VA 80 B
1400/710
68.0/40.0 0.81/0.50
1.65/0.75 3.7/2.5
4.4/1.35
1.8/2.3
1.8/2.6
0.0016
11
0.73/0.12
M3VA 80 C
1400/710
70.0/42.0 0.80/0.50
1.9/0.85
4.1/2.6
5/1.7
2/2.3
2/2.5
0.002
12
1/0.13
M3AA 90 S
1400/700
71.0/38.0 0.83/0.70
2.6/0.72
3.9/2.1
6.8/1.8
1.5/1
2/1.7
0.0032
13
1.4/0.18
M3AA 90 L
1420/710
74.0/41.0 0.81/0.60
3.5/1.1
4.5/2.3
9.4/2.4
1.7/1.1
2.3/2.1
0.0043
16
1.85/0.25
M3AA 100 LA
1430/720
78.0/45.0 0.84/0.60
4.2/1.4
4.9/2.5
12/3.3
1.7/1.1
2.3/2.1
0.0069
20
2.3/0.33
M3AA 100 LB
1430/720
80.0/49.0 0.86/0.60
5/1.6
5.2/2.6
15/4.3
1.8/1.1
2.4/2.2
0.0082
23
3/0.4
M3AA 112 M
1440/730
81.0/51.0 0.87/0.58
6.2/2
6.8/3.8
19.9/5.2
1.5/1.6
2.4/2.6
0.018
32
4/0.6
M3AA 132 S
1465/740
84.0/51.0 0.84/0.53
8.2/3.2
6.5/3.5
26.1/7.7
1.5/1.1
2.4/2.5
0.038
48
5.5/0.9
M3AA 132 M
1455/735
84.0/53.0 0.87/0.64
10.9/3.9
6.2/3.1
36.1/11.7 1.5/1.1
2.2/2
0.048
59
9/1.3
M3AA 160 M
1460/735
87.0/60.0 0.84/0.53
18/5.9
6.6/4
59/17
2/2.2
2.5/2.7
0.089
92
13/1.8
M3AA 160 L
1455/735
88.0/64.0 0.85/0.53
26/8.2
6/4.1
89/26
1.9/2.2
2.3/2.6
0.119
117
16/2.3
M3AA 180 M
1475/740
88.5/64.0 0.82/0.53
32/9.7
6.8/4.1
104/30
2.2/2.2
2.7/2.6
0.176
130
19/2.7
M3AA 180 L
1475/740
89.5/68.0 0.83/0.54
37/10.5
7.5/7.2
123/35
2.6/2.6
2.9/2.6
0.224
159
26/3.3
1475/740
91.0/73.0 0.85/0.59
49/11
6.9/4.6
168/46
2.1/2.2
2.5/2.3
0.28
180
30/3.8
1470/740
91.5/75.5 0.86/0.59
55/12.5
6.7/4.6
195/49
2.1/2.2
2.4/2.2
0.34
205
38/5.2
1480/740
91.5/80.5 0.84/0.63
72/15
7.3/5.2
245/67
2.1/2.3
2.6/2.3
0.41
230
46/7
1480/740
92.5/82.0 0.86/0.66
85/19
7.7/4.9
297/90
2.3/2.1
2.7/2.1
0.49
265
63/10
1475/740
93.5/83.0 0.89/0.65
110/27
7.5/6
408/129
2.4/3
2.7/2.7
0.89
335
400 V 50 Hz
0.18/0.037
M3VA 71 A
1380/720
58.0/17.0 0.74/0.50
0.6/0.7
3.5/1.7
1.24/0.49 1.7/1.7
1.8/1.8
0.00066 5.5
0.37/0.09
M3VA 71 B
1360/700
58.0/19.0 0.84/0.52
1.1/1.2
3.1/1.7
2.6/1.2
1.3/1.8
1.4/1.9
0.00089 6.5
0.45/0.1
M3VA 71 C
1390/685
60.0/24.0 0.78/0.51
1.4/1.2
3.5/2.6
3.1/1.4
1.7/1.3
1.8/1.4
0.0011
0.55/0.13
M3VA 80 A
1410/680
64.0/50.0 0.70/0.60
1.8/0.65
3.8/2.4
3.74/1.83 2.2/1.6
2.2/1.6
0.0013
0.75/0.17
M3VA 80 B
1400/675
67.0/53.0 0.75/0.62
2.15/0.75 4/2.4
5.13/2.41 2/1.4
2/1.4
0.0016
10
0.9/0.2
M3VA 80 C
1400/680
70.0/56.0 0.76/0.62
2.45/0.85 4.3/2.5
6.15/2.82 2.3/1.5
2.3/2.5
0.002
11
1.1/0.26
M3AA 90 S
1410/700
73.0/53.0 0.80/0.63
2.8/1.2
4.2/2.4
7.4/3.6
1.8/1.2
2.3/1.9
0.0032
13
1.7/0.35
M3AA 90 L
1390/700
74.0/57.0 0.82/0.57
4/1.6
4.5/2.5
10.3/4.7
2.2/1.5
2.6/2.1
0.0043
16
1.8/0.35
M3AA 90 LB
1400/710
76.0/60.0 0.83/0.56
4.2/1.5
4.3/2.7
12/4.8
1.9/1.6
2.3/2.3
0.0048
18
2.3/0.5
M3AA 100 LA
1415/715
76.0/63.0 0.84/0.60
5.2/1.9
4.6/2.7
15.5/6.7
1.8/1.2
2.4/1.9
0.0069
20
2.8/0.6
M3AA 100 LB
1430/720
81.0/68.0 0.82/0.58
6.4/2.2
5.2/3
18/8
2/1.2
2.6/2.2
0.0082
23
3/0.65
M3AA 100 LC
1430/720
81.0/67.0 0.81/0.56
6.8/2.5
5.6/3
20/8.7
2.2/1.3
2.8/2.3
0.009
26
3.5/0.7
M3AA 112 M
1430/720
81.0/71.0 0.89/0.58
7/2.5
6.8/4.4
23.4/9.3
1.6/1.7
2.5/2.7
0.018
32
5/1
M3AA 132 S
1450/725
83.0/74.0 0.87/0.59
9.9/3.3
6.4/3.6
32.9/13.2 1.5/1
2.3/2
0.038
48
6.8/1.4
M3AA 132 M
1460/730
85.0/73.0 0.84/0.55
13.7/5.1
7.6/3.6
44.5/18.3 2/1.4
2.8/2.7
0.048
59
10.5/2.2
M3AA 160 M
1460/735
87.5/79.0 0.84/0.54
21/7.4
6.9/3.7
69/29
2.2/1.5
2.7/2.3
0.089
94
15.5/2.7
M3AA 160 L
1460/735
88.5/79.5 0.85/0.51
30/9.5
6.9/3.9
101/35
2.2/1.7
2.6/2.6
0.119
117
17/3.4
M3AA 180 M
1470/730
88.5/78.0 0.85/0.56
33/11
5.8/4.3
111/44
1.7/1.2
2.3/1.9
0.176
137
22/4.4
M3AA 180 L
1475/735
89.5/79.0 0.83/0.53
43/15
6.7/3.9
143/57
2/1.7
2.6/2.3
0.224
161
29/6.5
1470/730
90.5/86.0 0.86/0.64
54/17
6.9/4.2
188/81
2.2/1.9
2.4/1.9
0.28
180
33/8
1475/730
91.5/86.5 0.86/0.64
61/21
7.8/4.2
214/105
2.6/1.9
2.6/1.8
0.34
205
42/10
1480/740
92.0/89.5 0.86/0.64
85/27
7.8/5
271/129
2.5/2.2
3/2.3
0.49
265
50/11
1465/735
92.5/89.5 0.87/0.65
91/28
7.3/4.7
324/143
2.3/2
2.5/2
0.49
265
60/15
1475/735
93.0/90.0 0.86/0.70
104/34
7.9/4.7
388/195
2.6/2.1
2.7/2
0.89
335
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
41
Motor type
Product code
Speed
r/min
Efciency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
0.18/0.05
M3VA 71 A
1400/900
56.0/27.0 0.76/0.79
0.6/0.4
3/2.1
1.22/0.53 1.1/1.1
1.2/1.2
0.00066 5.5
0.3/0.1
M3VA 71 B
1350/900
54.0/30.0 0.86/0.79
0.9/0.6
2.8/2
2.1/1.06
1/1.1
1.1/1.1
0.00089 6.5
0.5/0.19
M3VA 80 A
1370/930
60.0/53.0 0.84/0.77
1.4/0.7
2.9/3.1 3.5/1.96
1.4/1.5
1.4/1.5
0.0019
0.66/0.25
M3VA 80 B
1390/935
63.0/59.0 0.85/0.78
1.75/0.8
1.6/1.6
0.0022
10
0.78/0.3
M3VA 80 C
1400/940
66.0/60.0 0.84/0.73
2/1
1.8/2.1
0.0025
10
1/0.3
M3AA 90 S
1400/940
73.0/53.0 0.83/0.70
2.5/1.2
4.2/2.6 6.8/3
1.8/1
2.2/1.7
0.0032
13
1.5/0.45
M3AA 90 L
1400/930
72.0/52.0 0.84/0.73
3.5/1.6
4.3/2.9 10/4.5
1.7/1
2.1/1.8
0.0043
16
2/0.6
M3AA 100 LA
1430/960
77.0/62.0 0.85/0.72
4.5/2
5/3.3
13/5.9
1.8/1
2.4/1.9
0.0069
20
2.5/0.8
M3AA 100 LB
1430/960
79.0/68.0 0.84/0.71
5.5/2.5
5.6/3.5 16/7.9
2/1.1
2.5/2
0.0082
23
3/1
M3AA 112 M
1445/975
82.0/67.0 0.84/0.68
6.3/3.1
6/4
1.3/1
2.3/2.2
0.018
33
4.5/1.5
M3AA 132 S
1460/985
83.0/67.0 0.85/0.64
9.2/5.1
2.3/2.2
0.038
48
6/2
M3AA 132 M
1460/980
84.0/71.0 0.86/0.73
12/5.6
2.5/2
0.048
59
10.5/3.5
M3AA 160 M
1460/965
87.0/75.5 0.84/0.78
21/8.6
6.4/4.1 69/35
2/1.3
2.5/1.7
0.089
93
14.5/4.5
M3AA 160 L
1460/970
88.5/77.0 0.85/0.76
28/11
6.9/4.6 95/44
2.2/1.5
2.6/1.9
0.119
117
16/5
M3AA 180 M
1470/980
89.0/78.0 0.83/0.73
31/12.5
6.3/4.6 104/49
1.9/1.5
2.5/2
0.176
131
20/6.5
M3AA 180 L
1470/980
90.0/79.5 0.83/0.74
39/16
7.2/5
130/63
2.4/1.8
2.7/2
0.224
159
23/7.2
1475/985
89.5/84.0 0.88/0.87
43/15
7.7/7.8 149/70
1.6/1.9
2.8/2.9
0.44
175
30/9
1470/990
90.0/86.6 0.90/0.84
54/18.2
7.7/9.5 195/87
1.6/1.7
2.7/2.9
0.53
200
34/11
1470/985
91.0/85.0 0.91/0.89
60/21
7.7/6.7 221/107
1.5/1.3
2.7/2.3
0.67
225
42/14
1475/985
91.5/89.0 0.89/0.89
75/27
8.4/6.8 272/136
1.7/1.4
3/2.3
0.78
255
63/18.5
1475/985
93.5/87.0 0.89/0.79
110/40
7.5/7.3 408/179
2.4/3
2.7/2.6
0.89
335
400 V 50 Hz
19.8/9.8
0.25/0.1
M3VA 80 A
945/725
57.0/41.0 0.68/0.55
2.2/2.9
0.0019
0.33/0.14
M3VA 80 B
940/720
62.0/46.0 0.74/0.56
1.05/0.8
1.9/3
0.0022
10
0.45/0.2
M3AA 90 S
940/700
59.0/44.0 0.72/0.67
1.6/1
3.1/2.2 4.6/2.7
1.4/1
2/1.7
0.0032
13
0.7/0.3
M3AA 90 L
930/690
63.0/45.0 0.75/0.64
2.2/1.5
3.1/2.3 7.2/4.1
1.3/1.1
1.8/1.8
0.0043
16
0.9/0.4
M3AA 100 LA
950/720
68.0/55.0 0.77/0.61
2.5/1.8
3.4/2.7 9.1/5.3
1.2/1.1
1.8/1.8
0.0069
20
1.2/0.5
M3AA 100 LB
950/710
71.0/57.0 0.71/0.61
3.5/2.1
3.7/2.9 12/6.6
1.3/1.2
2/2
0.0082
23
17/7.5
985/740
88.0/81.5 0.85/0.77
33/17
7.1/6.4 165/97
2.2/2.2
2.5/2.5
0.42
185
20/9
985/740
88.5/82.5 0.84/0.74
39/21
7.6/7
194/116
2.4/2.6
2.7/2.9
0.48
200
26/12
985/740
89.5/84.5 0.85/0.76
49/27
7.4/7.1 252/155
2.2/2.4
2.5/2.7
0.63
225
32/14
985/740
90.5/85.5 0.83/0.76
62/31
7/7.2
310/180
2.4/2.5
2.4/2.5
0.74
250
43/15
990/745
91.0/86.0 0.84/0.75
81/34
7.3/7.4 415/198
2.2/2.7
2.5/2.8
1.41
320
400 V 50 Hz
2/2.4
0.4/0.08
M3VA 80 A
900/460
62.0/30.0 0.78/0.56
1.2/0.7
0.5/0.105
M3VA 80 B
915/465
66.0/31.0 0.75/0.52
1.45/0.95 3.7/2
0.6/0.12
M3VA 80 C
920/470
68.0/32.0 0.74/0.50
0.5/0.08
M3AA 90 S
920/440
0.75/0.12
M3AA 90 L
0.9/0.16
M3AA 100 LA
1.3/0.2
M3AA 100 LB
1.6/1.7
0.0019
2/2
0.0022
10
2/2
0.0025
11
60.0/31.0 0.74/0.59
1.7/0.63
2.9/1.7 5.2/1.7
1.2/1.4
1.8/2
0.0032
13
930/450
64.0/36.0 0.73/0.54
2.4/0.9
3/1.8
1.3/1.6
1.9/1.9
0.0043
16
940/470
69.0/45.0 0.73/0.49
2.6/0.96
3.6/2.1 9/3.2
1.3/1.2
2/1.8
0.0069
20
940/460
71.0/52.0 0.76/0.47
3.5/1.2
3.4/2.2 13/4
1.2/1
1.8/1.5
0.0082
23
5.23/2.16 1.9/1.9
7.7/2.5
42
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Motor type
Product code
Speed
r/min
Efciency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
0.58/0.28
M3VA 80 A
2850/1400
70.0/60.0 0.88/0.78
1.9/1.5 0.0008
0.7/0.36
M3VA 80 B
2860/1400
74.0/64.0 0.88/0.78
1.55/1.05 5/3.4
2.35/2.46 1.8/1.6
2.2/1.8 0.0009
11
0.85/0.42
M3VA 80 C
2890/1410
76.0/66.0 0.87/0.76
2.5/1.7 0.0012
12
1.1/0.55
M3AA 90 S
2900/1450
74.0/62.0 0.85/0.64
2.5/2
5.1/3.6 3.6/3.6
1.4/1.5
2.3/2.3 0.0019
13
1.5/0.75
M3AA 90 L
2900/1450
77.0/70.0 0.87/0.67
3.3/2.4
5.7/4.1 4.9/4.9
1.5/1.5
2.5/2.3 0.0024
16
2/1
M3AA 100 L
2900/1460
76.0/67.0 0.89/0.66
4.3/3.3
6.2/4
6.5/6.5
1.9/1.4
2.8/2.6 0.0041
21
2.6/1.3
M3AA 112 M
2900/1460
80.0/75.0 0.92/0.72
5.1/3.5
6.4/5
8.6/8.5
1.6/1.6
2.3/2.3 0.012
32
4.4/2.2
M3AA 132 SB
2925/1450
81.0/74.0 0.86/0.73
9.1/5.9
2.3/2.2 0.016
42
5.6/2.8
M3AA 132 M
2885/1440
82.0/77.0 0.93/0.75
10.6/7
6.7/5
18.5/18.6 1.8/1.4
2.1/2.2 0.022
56
12/6
M3AA 160 M
2835/1460
87.5/84.5 0.92/0.80
22/13
7.7/6
39/39
2.1/2.3
2.8/2.4 0.054
92
15/7.5
M3AA 160 L
2940/1460
88.5/84.5 0.93/0.78
27/16.5
7.9/6
49/49
2.2/2.4
2.9/2.4 0.057
99
18/9
M3AA 180 L
2945/1460
89.0/84.0 0.90/0.77
32/20
7.7/5.2 58/59
2.5/2.3
2.8/2.1 0.108
152
23/12
2960/1475
90.0/89.0 0.89/0.85
42/23
7.8/7.4 74/77
1.7/2.2
2.8/2.5 0.28
178
30/16
2960/1475
91.0/90.0 0.90/0.87
53/30
8.2/7.3 97/104
1.8/2.2
2.9/2.5 0.34
204
36/18
2960/1480
91.5/91.5 0.91/0.76
63/38
8/7.2
116/116
2.5/3.8
2.7/2.5 0.26
236
40/20
2960/1475
92.0/91.5 0.91/0.79
69/41
8.5/6.5 129/129
2.8/3.3
2.8/2.2 0.29
261
50/25
2965/1485
93.0/93.0 0.91/0.76
86/52
8.9/8.5 161/161
2.1/3.5
2.9/2.9 0.57
333
400 V 50 Hz
0.11/0.07
M3VA 56 B
2730/1370
53.0/44.0 0.75/0.58
0.4/0.4
2.6/2.8 0.00018
3.5
0.2/0.15
M3VA 63 A
2800/1400
63.0/54.0 0.70/0.63
2.2/2.1 0.00019
0.3/0.2
M3VA 63 B
2740/1370
59.0/55.0 0.78/0.63
1.7/2.1
1.8/2.2 0.00026
4.5
0.37/0.25
M3VA 71 A
2700/1390
64.0/60.0 0.89/0.79
0.95/0.7
3.3/3.1 1.3/1.72
1.9/1.5
2/1.6
0.00066
5.5
0.48/0.31
M3VA 71 B
2780/1400
68.0/68.0 0.91/0.76
1.2/0.9
3.6/4
1.5/2.1 0.00089
6.5
0.55/0.37
M3VA 71 C
2800/1400
66.0/64.0 0.80/0.65
1.5/1.2
1.9/2
0.0011
0.63/0.5
M3VA 80 A
2690/1400
66.0/67.0 0.87/0.79
1.6/1.35
1.9/2.1 0.0013
0.85/0.65
M3VA 80 B
2725/1405
70.0/70.0 0.88/0.80
2/1.7
4/4.4
1.9/2.2 0.0016
10
1.1/0.8
M3VA 80 C
2730/1410
72.0/71.0 0.88/0.79
2/2
2.1/2.4 0.002
11
1.3/1
M3AA 90 S
2730/1400
71.0/71.0 0.88/0.80
3.1/2.6
3.9/3.8 4.5/6.8
2/1.5
2.2/2
0.0032
13
1.9/1.5
M3AA 90 L
2820/1420
74.0/75.0 0.82/0.76
4.4/3.9
5.1/4.4 6.4/10
2.8/2
3/2.5
0.0043
16
2.5/2.1
M3AA 100 LA
2800/1430
68.0/76.0 0.88/0.81
6/5
4.8/4.4 8.5/14
2.2/1.6
2.5/2.2 0.0069
20
3.4/2.7
M3AA 100 LB
2810/1430
78.0/80.0 0.88/0.85
7.2/5.9
5.3/5.4 11.5/18
2.2/1.9
2.5/2.5 0.0082
23
4/2.6
M3AA 112 M
2865/1430
82.0/77.0 0.94/0.76
7.6/6.5
2.1/2.6 0.012
32
4.7/3.1
M3AA 132 SB
2820/1420
79.0/77.0 0.93/0.76
9.2/7.7
2.1/2.4 0.016
42
7.2/4.8
M3AA 132 M
2870/1435
84.0/81.0 0.93/0.76
2.4/2.5
2.6/2.7 0.022
56
9/6.5
M3AA 160 MA
2885/1440
83.0/82.0 0.92/0.74
1.3/1.7
1.9/1.9 0.039
73
12.5/9
M3AA 160 M
2890/1440
85.5/85.5 0.93/0.80
22.5/19
5.2/4.6 41/60
1.4/1.8
1.9/1.9 0.054
92
15/10.5
M3AA 160 L
2900/1445
87.0/86.0 0.93/0.77
27/23
5.8/4.9 49/69
1.6/2.1
2.1/2.1 0.057
99
18/12
M3AA 180 M
2940/1455
89.0/89.0 0.88/0.79
33/25
6.8/5.3 59/79
2.1/2.4
2.6/2.2 0.094
132
24/17
M3AA 180 L
2945/1455
90.0/90.0 0.89/0.80
43/34
7.4/5.2 78/111
2.4/2.4
2.8/2.1 0.108
152
32/24
2940/1470
89.0/90.5 0.89/0.86
58/45
6.8/5.9 104/156
1.8/2.1
2.4/2.1 0.28
180
39/29
2950/1470
90.5/91.0 0.84/0.86
75/53
6.8/7
126/188
1.7/2.2
2.6/2.4 0.34
205
42/32
2955/1475
92.5/93.0 0.92/0.88
71/57
7.1/6.5 136/207
1.5/1.9
2.5/2.3 0.49
230
50/40
2965/1480
92.5/93.0 0.84/0.87
87/72
7.4/7.1 161/259
2.4/2.8
3.3/3
0.49
265
68/50
2940/1475
93.0/93.5 0.93/0.88
113/87
6.6/6.9 220/324
1.5/2.1
2.4/2.5 0.89
335
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
1.66/2.15 1.4/2
2.99/4.43 1.9/2
43
Motor type
Product code
Speed
r/min
Efciency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
0.25/0.06
M3VA 71 A
2760/660
0.86/0.86 1/1.3
1.1/1.4 0.00066
5.5
0.37/0.09
M3VA 71 B
2800/660
2.8/2
1.26/1.3
1.1/1.7 0.00089
6.5
0.5/0.12
M3VA 80 A
2730/700
3.2/2.3
1.78/1.64 1.3/2
1.6/2
0.66/0.15
M3VA 80 B
2780/700
2.55/2.45 1.4/2.2
1.8/2.2 0.0016
10
0.78/0.18
M3VA 80 C
2800/700
4/2.6
2.67/2.46 1.5/2.4
2.2/2.4 0.002
11
0.75/0.18
M3AA 90 LA
2875/720
5.7/2.4
2.5/2.4
2.3/1.3
2.7/1.9 0.0043
16
1.3/0.33
M3AA 90 LB
2780/690
4.5/2.3
4.4/4.5
1.8/1.2
2/1.7
0.0043
16
1.8/0.5
M3AA 100 LB
2860/705
5.3/2.6
6/6.7
1.7/1.3
2.2/1.9 0.0082
24
400 V 50 Hz
1/1.6
0.0013
0.11/0.08
M3VA 63 B
3GVA 069232-A
1390/860
0.75/0.88 1.4/1.8
1.9/1.9 0.00026
4.5
0.3/0.2
M3VA 71 A
1390/900
2.8/2
5.5
0.37/0.22
M3VA 71 B
1380/900
2.7/1.9
2.07/1.91 1/1.1
1.1/1.1 0.00089
6.5
0.43/0.28
M3VA 80 A
1380/910
3.1/2.9
2.54/3.02 1.5/1.4
1.5/1.4 0.0019
0.58/0.37
M3VA 80 B
1390/920
3.3/3.2
4/3.85
1.5/1.5
1.6/1.6 0.0022
10
0.7/0.45
M3VA 80 C
1390/925
3.4/3.4
4.82/4.66 1.6/1.7
1.7/1.8 0.0025
10
0.8/0.5
M3AA 90 S
1430/940
3.9/2.8
5.3/5
1.5/1.4
2.1/2.1 0.0032
13
1.2/0.75
M3AA 90 L
1430/940
4.4/3.1
8/7.6
1.7/1.5
2.3/2.1 0.0043
16
1.5/0.9
M3AA 100 LA
1440/960
4.7/3.8
9.9/8.9
1.5/1.5
2.2/2.4 0.0069
20
1.8/1.1
M3AA 100 LB
1460/960
5.8/3.9
11/11
2.1/1.6
3/2.5
23
2.6/1.7
M3AA 112 M
1445/960
5.9/5.2
17.2/16.9 1.5/1.5
2.2/2.4 0.018
33
3.3/2.2
M3AA 132 S
1470/980
6.8/4.6
21.4/21.4 1.4/1.2
2.5/2.4 0.038
48
4.5/3
M3AA 132 M
1470/980
7.2/5.6
29.2/29.2 1.4/1.5
2.3/2.6 0.048
59
7.5/5.5
M3AA 160 M
1465/965
7.1/4.7
49/54
2.1/1.8
2.7/1.9 0.089
93
11.5/8.5
M3AA 160 L
1465/965
7/4.9
75/84
2.1/1.8
2.8/2
0.119
117
13/8
M3AA 180 M
1475/975
6.5/4.3
84/78
1.9/1.4
2.6/1.8 0.176
131
15/10
M3AA 180 L
1475/975
7.1/4.4
97/98
2.3/1.5
2.7/1.9 0.224
159
18/12
1475/985
7.6/7.8
117/116
2.1/2.6
2.5/2.6 0.42
185
22/14.7
1480/985
8.2/7.6
142/143
2.4/2.6
2.8/2.5 0.48
200
25/16.7
1475/980
7.7/6.7
162/162
2.3/2.3
2.6/2.2 0.48
200
32/21
1480/985
8.6/8
206/204
2.3/2.4
2.8/2.7 0.63
225
36/24
1480/985
8.4/7.4
232/233
2.2/2.2
2.8/2.5 0.74
250
50/32
1475/985
7.5/7.1
324/310
2.3/3.1
2.6/2.6 0.89
335
0.0082
44
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Motor type
Product code
Speed
r/min
Efciency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
0.28/0.14
M3VA 80 A
1425/700
60.0/50.0 0.77/0.68
0.9/0.6
4/3
1.88/1.92 1.9/1.9
2.2/2
0.0019
0.38/0.19
M3VA 80 B
1430/705
64.0/52.0 0.77/0.68
1.1/0.8
4.2/3.1
2.55/2.58 2/2
2.4/2
0.0022
10
0.46/0.23
M3VA 80 C
1430/710
66.0/55.0 0.78/0.65
1.3/0.95 4.3/3.3
3.1/3.1
2/2.1
2.4/2.2
0.0025
11
0.55/0.25
M3AA 90 S
1450/700
62.0/51.0 0.78/0.59
1.9/1.2
4.2/2.3
3.6/3.4
1.3/1.4
2.2/2.1
0.0032
13
0.75/0.37
M3AA 90 L
1450/700
66.0/57.0 0.75/0.57
2.2/1.7
4.1/2.5
4.9/5
1.4/1.5
2.4/2.2
0.0043
16
1.1/0.55
M3AA 100 LA
1460/710
68.0/62.0 0.77/0.61
3.1/2.2
4.2/2.6
7.2/7.4
1.2/1.2
2.3/1.9
0.0069
20
1.5/0.75
M3AA 100 LB
1440/700
72.0/60.0 0.82/0.60
3.7/2.9
4.6/2.7
9.8/10
1.3/1.2
2.2/1.9
0.0082
23
1.8/0.9
M3AA 112 M
1470/715
77.0/65.0 0.76/0.66
4.4/3
6.5/4
11.7/12
1.2/1.6
2.2/2.4
0.018
32
2.5/1.3
M3AA 132 S
1470/730
80.0/69.0 0.79/0.58
5.7/4.7
6.7/4.4
16.2/17
1.6/1.4
2.6/2.7
0.038
48
3.3/1.7
M3AA 132 M
1470/725
81.0/71.0 0.83/0.67
7.1/5.2
8/4.8
21.4/22.4 1.8/1.8
2.7/2.2
0.048
59
5.5/2.7
M3AA 160 M
1465/730
85.0/71.0 0.83/0.57
11.5/9.6 5.6/4
36/35
1.7/2
2.2/2.3
0.089
92
9/4.5
M3AA 160 L
1465/730
86.5/73.5 0.83/0.56
18/16
7/4.1
59/59
2.1/2.1
2.7/2.5
0.119
117
14/7
M3AA 180 L
1475/735
88.0/76.0 0.83/0.56
28/24
7.7/4.2
91/91
2.6/2.3
2.9/2.3
0.225
159
18.5/9.4
1475/730
89.5/82.5 0.85/0.65
35/26
7.3/4.3
120/123
2.2/1.9
2.5/1.8
0.28
180
22/11
1480/735
90.5/83.0 0.84/0.60
42/32
8.4/4.7
142/143
2.6/2.4
2.9/2.2
0.34
205
28/14
1480/735
90.0/85.5 0.85/0.61
53/39
7.7/4.9
181/182
2.1/2.4
2.7/2.2
0.41
230
34/17
1480/735
92.0/87.0 0.86/0.66
63/43
7.9/4.8
219/221
2.2/2.2
2.7/2
0.49
265
50/25
1480/740
92.5/88.0 0.87/0.60
90/68
8.6/6
323/323
2.6/3.5
3/2.9
0.89
335
400 V 50 Hz
0.11/0.06
M3VA 63 B
1390/660
54.0/33.0 0.60/0.49
0.5/0.55 3/1.7
0.75/0.87 1.6/2.5
1.7/2.6
0.00026 4.5
0.18/0.11
M3VA 71 A
1380/680
54.0/37.0 0.70/0.53
0.7/0.8
3.2/2.5
1.24/1.54 1.9/2.2
2/2.3
0.00066 5.5
0.3/0.15
M3VA 71 B
1400/700
60.0/47.0 0.74/0.51
0.9/0.9
3.2/2.6
2.05/2.05 2/2.5
2.1/2.6
0.00089 6.5
0.45/0.25
M3VA 80 A
1380/700
65.0/48.0 0.87/0.58
1.15/1.3 3.5/2.7
3.12/3.42 1.7/2.1
1.7/2.1
0.0019
0.63/0.33
M3VA 80 B
1380/705
67.0/50.0 0.88/0.56
1.55/1.7 3.5/2.8
4.37/4.48 1.7/2.2
1.7/2.2
0.0022
10
0.75/0.37
M3VA 80 C
1390/710
70.0/52.0 0.86/0.51
1.8/2
3.9/2.9
5.16/4.98 1.9/2.5
1.9/2.5
0.0025
10
0.7/0.37
M3AA 90 S
1420/700
72.0/50.0 0.80/0.57
1.8/1.9
4.4/2.3
4.7/5.1
1.6/1.6
2.3/2.2
0.0032
13
1.1/0.55
M3AA 90 L
1390/685
70.0/55.0 0.84/0.58
2.6/2.6
4.1/2.3
7.4/7.5
1.4/1.5
2/2.1
0.0043
16
1.5/0.75
M3AA 100 LA
1440/710
76.0/62.0 0.85/0.57
3.4/3.2
4.6/2.8
10/10
1.4/1.5
2.2/2.2
0.0069
20
2/0.95
M3AA 100 LB
1440/710
78.0/64.0 0.86/0.55
4.4/4
4.8/2.9
13/12
1.4/1.6
2.2/2.3
0.0082
23
2.5/1.5
M3AA 112 M
1410/705
78.0/67.0 0.90/0.66
5.1/4.9
5.5/4.1
16.9/20.3 1.4/1.5
2.1/2.4
0.018
32
3.8/1.9
M3AA 132 S
1450/730
82.0/70.0 0.86/0.52
7.7/7.6
5.6/3.7
25/24.9
2.1/2.7
0.038
48
5/2.5
M3AA 132 M
1455/730
85.0/73.0 0.88/0.52
9.6/9.6
6.9/4.8
32.8/32.7 1.7/2
2.4/2.8
0.048
59
8/4.5
M3AA 160 M
1440/730
84.5/79.5 0.86/0.60
16/13.5
4.5/3.4
53/59
1.3/1.4
1.8/1.9
0.089
92
12/7
M3AA 160 L
1445/730
86.5/81.0 0.87/0.59
23/21
5/3.5
79/92
1.5/1.4
1.9/1.9
0.119
117
16/8
M3AA 180 L
1460/730
88.0/78.5 0.86/0.53
31/28
1.9/3.4
105/104
1.4/1.6
1.9/2.1
0.224
159
22/13
1475/735
87.5/86.0 0.81/0.69
45/32
6.5/5.9
142/169
2/2.5
2.6/2.7
0.36
165
25/15
1475/735
89.0/86.0 0.86/0.67
47/38
7.6/6
162/195
2.2/2.6
2.7/2.7
0.42
185
29/17
1475/735
90.0/88.0 0.91/0.75
52/38
7.2/6.1
188/221
2.2/2.6
2.4/2.4
0.48
200
35/21
1475/735
90.0/89.0 0.90/0.74
63/47
6.7/5.8
227/273
1.7/2.1
2.2/2.3
0.63
225
42/25
1475/735
91.0/89.5 0.91/0.75
74/54
6.8/5.9
272/325
1.8/2.1
2.2/2.2
0.74
250
55/33
1480/740
92.0/90.5 0.90/0.75
97/71
7.3/6.4
355/426
2.1/2.5
2.5/2.5
1.5
320
400 V 50 Hz
1.4/1.3
1.6/0.8
M3AA 112 M
965/725
72.9/60.0 0.70/0.64
4.5/3
5.6/4.4
15.8/10.6 2.3/2.3
2.6/2.4
0.015
35
2.3/1.3
M3AA 132 S
975/730
77.2/63.5 0.72/0.64
6.8/4.6
6.4/4.2
25.4/17
2.8/2.3
0.04
48
3.5/1.6
M3AA 132 M
975/730
78.8/65.8 0.72/0.66
9/5.2
7.1/5.1
34.2/20.9 2/1.9
2.9/2.4
0.041
48
16/12
985/740
86.5/82.5 0.85/0.73
31/29
7/6.3
155/155
2.1/2.4
2.4/2.6
0.42
185
18/13.5
985/740
87.5/83.5 0.83/0.72
36/32
7.9/6.6
174/174
2.5/2.6
2.8/2.8
0.48
200
23/17
985/740
89.0/85.5 0.84/0.78
46/37
7.9/6.3
222/220
2.3/2.2
2.7/2.3
0.63
225
28/20
985/740
89.0/86.5 0.86/0.77
57/43
7.1/6.5
272/259
2/2.3
2.4/2.4
0.74
250
37/27
990/740
90.0/87.5 0.83/0.75
71/59
7.8/6.7
357/348
2.3/2.5
2.7/2.5
1.41
320
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
1.6/1.5
45
Variant
1)
Motor size
567163
80
90100
Balancing
052
417
NA
NA
NA
423
424
036
NA
NA
037
NA
NA
NA
NA
039
040
041
NA
NA
042
NA
043
SPM nipples.
NA
NA
057
NA
NA
058
059
107
NA
NA
NA
NA
NA
NA
NA
188
63-series bearings.
NA
NA
796
NA
NA
NA
797
NA
NA
NA
798
NA
NA
NA
NA
NA
NA
079
NA
142
NA
NA
178
199
NA
NA
NA
NA
NA
209
416
NA
NA
NA
425
785
Reinforced tropicalisation.
NA
NA
NA
053
NA
075
Metal fan cover. The dimension L1 and L2 respectively is increased by 7.5 mm for the frame size 112 and 5.5 mm for the
frame size 132.
Metal fan. Mandatory for ambient temperatures: For sizes 71100, > 80 C; sizes 112-132, > 50 C; sizes 160-250, > 80 C
Cooling method IC418 (without fan).
183
NA
NA
NA
189
NA
NA
NA
Cooling system
068
1)
46
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Code
Variant
1)
Motor size
567163
80
90100
793
NA
NA
NA
794
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Coupling
035
Dimension drawing
141
Drain holes
065
066
076
Earthing bolt
067
Hazardous environments
See catalogue Motors for Hazardous Environments for details.
Heating elements
Motor size
Element capacity
56-71
8W
80-160
25 W
180-280
50 W
450
451
Insulation systems
014
405
NA
NA
406
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Marine Motors
See catalogue Marine Motors for details.
Mounting arrangements
007
008
009
047
048
1)
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
47
Code
Variant
1)
078
080
090
091
Motor size
567163
80
90100
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
200
NA
NA
NA
217
NA
NA
218
NA
NA
NA
NA
NA
NA
NA
NA
219
NA
NA
NA
NA
NA
NA
NA
NA
220
NA
NA
NA
NA
NA
NA
NA
NA
223
NA
NA
NA
NA
NA
NA
NA
NA
224
NA
NA
NA
NA
NA
NA
NA
NA
226
NA
NA
NA
NA
NA
NA
NA
NA
227
NA
NA
NA
NA
NA
NA
NA
NA
233
NA
NA
NA
NA
NA
NA
NA
NA
234
NA
NA
NA
NA
NA
NA
NA
NA
243
NA
NA
NA
NA
NA
NA
NA
NA
NA
244
NA
NA
NA
NA
NA
NA
NA
NA
NA
304
NA
NA
NA
NA
NA
NA
Painting
114
179
NA
NA
Protection
005
072
073
NA
NA
NA
NA
NA
NA
NA
NA
158
211
Weather protected, IP xx W
NA
NA
NA
NA
NA
NA
NA
NA
NA
403
784
Gamma-seal at D-end.
NA
NA
NA
003
004
NA
NA
NA
NA
NA
NA
095
098
135
138
1)
48
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Code
Variant
1)
Motor size
567163
80
90100
139
160
161
163
NA
NA
NA
198
070
131
165
NA
NA
410
011
NA
NA
NA
NA
NA
NA
029
NA
NA
NA
NA
NA
NA
NA
408
NA
NA
NA
NA
NA
NA
778
NA
779
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
321
322
323
325
435
436
437
439
1)
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
49
Code
Variant
1)
440
441
442
445
446
Motor size
567163
80
90100
NA
NA
NA
NA
NA
NA
Terminal box
015
017
018
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
019
021
NA
NA
NA
NA
NA
112
NA
NA
NA
NA
NA
NA
NA
136
137
NA
NA
NA
NA
NA
NA
NA
NA
NA
180
NA
NA
NA
NA
NA
187
NA
NA
NA
230
402
NA
NA
NA
NA
NA
NA
NA
NA
413
NA
NA
NA
NA
NA
NA
NA
418
NA
NA
467
NA
NA
NA
468
NA
NA
NA
469
NA
NA
NA
729
NA
NA
NA
NA
NA
NA
NA
731
NA
739
NA
NA
740
NA
NA
NA
Testing
140
Test conrmation.
145
146
Type test with report for motor from specic delivery batch.
147
148
149
NA
NA
153
1)
50
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Code
Variant
1)
221
222
Type test and multi-point load test with report for motor from
specic delivery batch.
Torque/speed curve, type test and multi-point load test with report from specic delivery batch.
Motor size
567163
80
90100
760
761
NA
NA
NA
762
763
NA
NA
764
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
704
NA
NA
NA
NA
NA
NA
189
NA
NA
NA
NA
NA
NA
NA
470
Prepared for hollow shaft pulse tacho. (Leine & Linde equivalent).
570
NA
NA
572
NA
NA
573
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Separate motor cooling & prepared for tacho; tacho not included
474
476
477
574
576
577
578
580
581
1)
Separate motor cooling (fan axial, N-end) and 1024 pulse tacho.
(Leine & Linde equivalent).
Separate motor cooling (fan axial, N-end) and 2048 pulse tacho.
(Leine & Linde equivalent).
Separate motor cooling (fan axial, N-end) and prepared for hollow shaft tacho (L&L 562).
Separate motor cooling (fan axial, N-end) and 1024 pulse tacho
(L&L 562).
Separate motor cooling (fan axial, N-end) and 2048 pulse tacho
(L&L 562).
Separate motor cooling, IP44, 400V, 50Hz (fan axial, N-end)
and prepared for hollow shaft tacho (L&L 562).
Separate motor cooling, IP44, 400V, 50Hz (fan axial, N-end)
and 1024 pulse tacho (L&L 562).
Separate motor cooling, IP44, 400V, 50Hz (fan axial, N-end)
and 2048 pulse tacho (L&L 562).
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
51
Code
Variant
1)
Motor size
567163
80
90100
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Y/D starting
117
118
1)
Terminals for Y/D start at both speeds (two speed motors with
separate windings).
Terminals for Y/D start at high speed (two speed motors with
separate windings).
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
52
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Sizes 56-100
Dimension drawings
Foot-mounted motor;
IM B3 (IM 1001), IM 1002
AA
AB
AC
AE
BB
56
63
71
80
90 S
90 L
100
18
26
24
28
27
27
32
108
120
136
154
170
170
197
110
120
130
150
177
177
197
72
72
85
97
110
110
110
71
80
90
100
100
125
140
85
96
110
125
125
150
172
Motor
size
G
GA
GB
GC
HA HC
56
63
71
80
90 S
90 L
100
10.2
12.5
16
21.5
27
27
31
7.2
8.5
8.5
11
11
11
15.5
10.2
12.5
12.5
16
16
16
21.5
56
63
71
80
90
90
100
8
10
9
10
11
11
12
90
100
112
125
140
140
160
7.2
8.5
11
15.5
20
20
24
110
120
130
150
177
177
198
CA
36
40
45
50
56
56
63
78
71
78
80
81
81
91
HD
HE
KA
LC
UB
UC
159
171
176
190
217
217
237
71
76
63
67
82.5
82.5
92.5
5.8
7
7
10
10
10
12
9
11
10
15
14
14
15
197
205
238
265
282
307
349
225
237
266
300
317
342
394
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
CB
7
8
10
12.5
12.5
12.5
16
9
11
14
19
24
24
28
DA
9
11
11
14
14
14
19
DB
M3
M4
M5
M6
M8
M8
M10
DC
M3
M4
M4
M5
M5
M5
M6
EA
EG
EH
FA
20
23
30
40
50
50
60
20
23
23
30
30
30
40
9
10
13
16
19
19
22
9
10
10
13
12.5
12.5
19
3
4
5
6
8
8
8
3
4
4
5
5
5
6
VA
VB
VC VD
30
36
35
37
43.5
43.5
47
72
72
92
100
110
110
110
26
26
22
26
33
33
33
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
12
10
11
100
115
130
165
165
215
80
95
110
130
130
180
120
140
160
200
200
250
7
10
10
12
12
15
3
3
3.5
3.5
3.5
4
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
10
13
14
65
75
85
100
115
130
50
60
70
80
95
110
80
90
105
120
140
160
M5
M5
M6
M6
M8
M8
2.5
2.5
2.5
3
3
3.5
Tolerances:
A,B
+ - 0.8
D, DA
ISO j6
F, FA
ISO h9
53
53
57
61
67
67
67
H
N
C, CA
+0 -0.5
ISO j6
+- 0.8
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
53
Sizes 56-100
Dimension drawings
Foot- and ange-mounted motor;
IM B34 (IM 2101), IM 2102, small ange
2
IM B35 (IM 2001),IM 2002, IM B34 (IM 2101), IM 2102
Motor
size A
AA
AB
AC
AE
BB
56
63
71
80
90 S
90 L
100
18
26
24
28
27
27
32
108
120
136
154
170
170
197
110
120
130
150
177
177
197
72
72
85
97
110
110
110
71
80
90
100
100
125
140
85
96
110
125
125
150
172
Motor
size G
GA
GB
GC
HA
HC
HD
HE
KA
56
63
71
80
90 S
90 L
100
10.2
12.5
16
21.5
27
27
31
7.2
8.5
8.5
11
11
11
15.5
10.2
12.5
12.5
16
16
16
21.5
56
63
71
80
90
90
100
8
10
9
10
10
10
12
110
120
130
150
177
177
197
159
171
176
190
217
217
237
71
76
63
67
82.5
82.5
92.5
5.8
7
7
10
10
10
12
9
11
10
15
14
14
15
197
205
238
265
282
307
349
90
100
112
125
140
140
160
7.2
8.5
11
15.5
20
20
24
CA
36
40
45
50
56
56
63
78
71
78
80
81
81
91
CB
7
8
10
12.5
12.5
12.5
16
DA
9
11
14
19
24
24
28
DB
9
11
11
14
14
14
19
M3
M4
M5
M6
M8
M8
M10
DC
M3
M4
M4
M5
M5
M5
M6
LC
UB
225
237
266
300
317
342
394
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
EA
EG
20
23
30
40
50
50
60
20
23
23
30
30
30
40
9
10
13
16
19
19
22
EH
FA
9
10
10
13
12.5
12.5
19
3
4
5
6
8
8
8
3
4
4
5
5
5
6
VA
VB
VC VD
30
36
35
37
43.5
43.5
47
72
72
92
100
110
110
110
26
26
22
26
33
33
33
UC
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
12
10
11
100
115
130
165
165
215
80
95
110
130
130
180
120
140
160
200
200
250
7
10
10
12
12
15
3
3
3.5
3.5
3.5
4
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
10
13
14
65
75
85
100
115
130
50
60
70
80
95
110
80
90
105
120
140
160
M5
M5
M6
M6
M8
M8
2.5
2.5
2.5
3
3
3.5
Tolerances:
A,B
+ - 0.8
D, DA
ISO j6
F, FA
ISO h9
54
H
N
C, CA
53
53
57
61
67
67
67
+0 -0.5
ISO j6
+- 0.8
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Sizes 71-100
Dimension drawings
Special design with two-piece anges
Motor
size
IEC
Flange
Flange dimensions
HB
P
M
LA
S2)
Variant code 1)
FF
FT
71
FT85
FF100 / FT100
FF115 / FT115
FF130 / FT130
FF165 / FT165
105
105
105
105
105
105
120
140
160
200
85
100
115
130
165
70
80
95
110
130
7.5
7.5
9.5
9.5
10.5
M6
M6
M8
M8
M10
2.5
3
3
3.5
3.5
220
223
226
233
218
219
224
227
234
80
FT85
FF100 / FT100
FF115 / FT115
FF130 / FT130
FF165 / FT165
110
110
110
110
110
105
120
140
160
200
85
100
115
130
165
70
80
95
110
130
7.5
7.5
9.5
9.5
10.5
M6
M6
M8
M8
M10
2.5
3
3
3.5
3.5
220
223
226
233
218
219
224
227
234
90
FT85
FF100 / FT100
FF115 / FT115
FF130 / FT130
FF165 / FT165
127
127
127
127
127
105
120
140
160
200
85
100
115
130
165
70
80
95
110
130
7.5
7.5
9.5
9.5
10.5
M6
M6
M8
M8
M10
2.5
3
3
3.5
3.5
220
223
226
233
218
219
224
227
234
100
FF130 / FT130
FF165 / FT165
FF215 / FT215
137
137
137
160
200
250
130
165
215
110
130
180
9.5
10.5
12.5
M8
M10
M12
3.5
3.5
4
226
233
243
227
234
244
Variant code 200 Flange ring holder must be added when using the variant codes mentioned below.
Flanges with clearance (FF) or tapped (FT) holes for indicated screws.
Tolerances:
N ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
55
Sizes 112-132
Dimension drawings
Foot-mounted motor; IM B 3 (IM 1001), IM 1002
IM B 3 (IM 1001)
Motor
size
AA
AB
AC
AE
BA BB
BC C
CA
CA
CB
DA
DB
DC
EB)
EA
EG
EH
F FA
1)
112
190
41
222
221
160
140
31
168
31
70
115.5
14
28
19
M10
M8
60
40
22
19
1122)
190
41
222
221
160
140
31
168
31
70
138
14
28
19
M10
M8
60
40
22
19
1323)
216
47
262
261
160
140
178A)
40
212
76
89
158
120
18
38
24
M12
M8
80
50
28
19
10
1324)
216
47
262
261
160
140A) 178
40
212
76
89
191
153
18
38
24
M12
M8
80
50
28
19
10
Motor G GA GB
size
HA HC
HD
HE
1121)
258
92
12 361F)
112
258
92
12 388
1323)
33 41 20
27
1324)
33 41 20
27
2)
GC H
L1
L2
LC
LC1 LC2
361F)
361F)
421.5
421.5 421.5
M20
M25
60 160
80
120
40
F)
388
388F)
448
448
448
M20
M25
60 160
80
120
40
447G)
447G)
517
517
517
M20
M25
71 160
80
120
40
550
550
M20
M25
71 160
80
120
40
F)
LA
112
146
20
130
110
160
M8
3.5
1122)
146
20
130
110
160
M8
3.5
14.5
1323)
163.5 18
165
130
200
M10
3.5
14.5
1324)
163.5 18
165
130
200
M10
3.5
112
1)
146
11
215
180
250
14.5
1122)
146
11
215
180
250
14.5
1323)
163.5 14
265
230
300
1324)
163.5 14
265
230
300
56
2)
3)
4)
Motor
size
HB
LA
1)
VD1 VD2
1)
HB
Tolerances
A, B
ISO js14
C, CA +2 -2
D28
ISO j6
D38
ISO k6
DA
ISO j6
F, FA ISO h9
H
+0 -0.5
N
ISO j6
VCD)
IM B 5 (IM 3001)
Motor
size
UB1C) UB2C) VA VB
A)
B)
C)
D)
E)
F)
G)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Sizes 112-132
Dimension drawings
Foot- and ange-mounted motor; IM B 35 ( IM 2001), IM 2002, large ange
2
Foot- and ange-mounted motor; IM B 34 (IM 2101), IM 2102, small ange
AA
AB
AC
AE
BA BB
BC C
CA
CA
CB
DA
DB
DC
EB)
EA
EG
EH
F FA
1121)
190
41
222
221
160
140
31
168
31
70
115.5
14
28
19
M10
M8
60
40
22
19
1122)
190
41
222
221
160
140
31
168
31
70
138
14
28
19
M10
M8
60
40
22
19
1323)
216
47
262
261
160
140
178A)
40
212
76
89
158
120
18
38
24
M12
M8
80
50
28
19
10
132
216
47
262
261
160
140
178
40
212
76
89
191
153
18
38
24
M12
M8
80
50
28
19
10
4)
Motor G GA GB
size
HA HC
HD
HE
1121)
258
92
12 361F)
361F)
112
258
92
12 388
F)
2)
GC H
A)
L1
F)
L2
LC
LC1 LC2
UB1C) UB2C) VA VB
VCD)
VD1 VD2
361F)
421.5
421.5 421.5
M20
M25
60 160
80
120
40
388
388F)
448
448
448
M20
M25
60 160
80
120
40
447G)
447G)
1323)
33 41 20
27
517
517
517
M20
M25
71 160
80
120
40
1324)
33 41 20
27
550
550
M20
M25
71 160
80
120
40
IM B 35 (IM 2001)
Motor
size
112
1122)
1323)
1324)
1)
Tolerances
A, B
ISO js14
C, CA +2 -2
D28
ISO j6
D38
ISO k6
DA
ISO j6
F, FA ISO h9
H
+0 -0.5
N
ISO j6
IM B 34 (IM 2101)
HB
LA
146
146
163.5
163.5
11
11
14
14
215
215
265
265
180
180
230
230
250
250
300
300
14.5
14.5
14.5
14.5
4
4
4
4
1)
2)
4)
A)
B)
C)
D)
Motor
size
112
1122)
1323)
1324)
1)
HB
LA
146
146
163.5
163.5
20
20
18
18
130
130
165
165
110
110
130
130
160
160
200
200
M8
M8
M10
M10
3.5
3.5
3.5
3.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
E)
F)
G)
57
M2AA 160-200
Dimension drawings
Foot-mounted motor; IM B3 (IM 1001), IM 1002
160 3)
254 56
180 4)
180 5)
AA
BB
BC C
287.5
86
316
88
316
200 6)
318 64
200 7)
318 64
Motor
size
FA
160 3)
10
180 4)
10
180 5)
200 6)
200 7)
AB
AC
AE
B8)
B8)
BA
DA
DB
DC
42
32
M16
48
32
M16
88
48
32
365
98
133 218
180
30
55
365
98
133 238
200
30
55
LC
UB12)
M12 110
80
36
28
12
M12 110
80
36
28
14
M16
M12 110
80
36
28
14
32
M20
M12 110
80
42
28
16
32
M20
M12 110
80
42
28
16
35
160 20
15
602.5
693.5
2*M40
M16
89
210 84.5
134.5 167.5
35
180 20
15
602.5
693.5
2*M40
M16
89
210 84.5
134.5 167.5
10
42.5
51.5 27
35
180 20
15
643.5
734.5
2*M40
M16
89
210 84.5
134.5 167.5
10
49
59
27
35
200 25
18
711.5
801.5
2*M40
M16
109
210 84.5
134.5 167.5
10
49
59
27
35
200 25
18
732
821.5
2*M40
M16
109
210 84.5
134.5 167.5
8)
EH
27
7)
EG
45
6)
HE
EA
51.5 27
5)
HD
UB22) VA
VB
42.5
4)
HC
37
3)
HA
CB
GB
Tolerances
A, B
ISO js14
C, CA
0 +2
DA 32
ISO k6
D 45-48 ISO k6
D 55
ISO m6
F, FA
ISO h9
H
+0 -0.5
CA
GA
2)
GC
CA
VC
VD
VE
Knockout openings.
MA-2, M-2, L-2, M-4, L-4
M-2, M-4
L-4
LA-4
L-2, L-4
160 M, 180 M: B not acc. to IEC
160 L, 180 L, 200 LA: B not acc. to IEC
58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
M2AA 160-200
Dimension drawings
Flange-mounted motor; IM B5 (IM 3001), IM 3002
AC
AE
DA
DB
DC
E8)
EA
EG
EH
FA
GA
GB
GC
HB
HE
160 3)
310
210
42
32
M16
M12
110
80
36
28
12
10
37
45
27
35
210
130
180 4)
310
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
210
130
180 5)
310
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
210
130
200 6)
360
210
55
32
M20
M12
110
80
42
28
16
10
49
59
27
35
210
145
200 7)
360
210
55
32
M20
M12
110
80
42
28
16
10
49
59
27
35
210
145
Motor
size
LA
LB
LC
160 3)
602.5
16
180 4)
602.5
16
180 5)
643.5
200 6)
200 7)
UB12)
UB22) VA
VB
VC
VD
VE
492.5 693.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
492.5 693.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
16
533.5 734.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
711.5
20
601.5 801.5
350
300
400
19
2*M40
M16
109
210
79.5
134.5
171.5
732
20
622
350
300
400
19
2*M40
M16
109
210
79.5
134.5
171.5
Tolerances
DA 32
ISO k6
D 45-48 ISO k6
D 55
ISO m6
F, FA
ISO h9
N
ISO j6
2)
3)
4)
5)
6)
7)
8)
821.5
Knockout openings.
MA-2, M-2, L-2, M-4, L-4
M-2, M-4
L-4
LA-2
L-2, L-4
Shoulder of shaft extension and contact surface of ange are in the same plane.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
59
M2AA 160-200
Dimension drawings
Foot- and ange-mounted motor; IM B35 (IM 2001), IM 2002
AA
AB
AC
AE
B9)
B9)
BA
BB
BC
CA
CA
CB
DA
DB
DC
160 3)
254
56
310
310
210
210
254
55
287.5 86
108
185.5 141.5
20
42
32
M16
M12
180 4)
279
65.5
340
310
210
241
279
58
316
88
121
185.5 141.5
25
48
32
M16
M12
180 5)
279
65.5
340
310
210
241
279
58
316
88
121
226.5 182.5
25
48
32
M16
M12
200 6)
318
64
380
360
210
267
305
98
365
98
133
218
180
30
55
32
M20
M12
200 7)
318
64
380
360
210
267
305
98
365
98
133
238
200
30
55
32
M20
M12
Motor
size
E8)
EA
EG
EH
FA
GA
GB
GC
HA
HB
HC
HD
HE
160 3)
110
80
36
28
12
10
37
45
27
35
160
20
325
370
130
15
602.5
180 4)
110
80
36
28
14
10
42.5
51.5
27
35
180
20
345
390
130
15
602.5
180 5)
110
80
36
28
14
10
42.5
51.5
27
35
180
20
345
390
130
15
643.5
200 6)
110
80
42
28
16
10
49
59
27
35
200
25
380
425
145
18
711.5
200 7)
110
80
42
28
16
10
49
59
27
35
200
25
380
425
145
18
732
Motor
size
LA
LB
LC
160 3)
16
492.5
693.5
300
250
180 4)
20
492.5
693.5
300
250
180 5)
20
533.5
734
300
200 6)
20
601.5
801.5
200 7)
20
622.0
821.5
Tolerances
A, B
ISO js14
C, CA
+0 -2
DA32
ISO k6
D45-48 ISO k6
D55
ISO m6
F, FA
ISO h9
H
+0 - 0.5
N
ISO j6
2)
3)
4)
5)
6)
7)
8)
9)
UB12)
UB22)
VA
VB
VC
VD
VE
350 19
2*M40
M16
89
210
79.5
134.5
171.5
350 19
2*M40
M16
89
210
79.5
134.5
171.5
250
350 19
2*M40
M16
89
210
79.5
134.5
171.5
350
300
400 19
2*M40
M16
109
210
79.5
134.5
171.5
350
300
400 19
2*M40
M16
109
210
79.5
134.5
171.5
Knockout openings.
MA-2, M-2, L-2, M-4, L-4
M-2, M-4
L-4
LA-2
L-2, L-4
Shoulder of shaft extension and contact surface of ange are in the same plane.
160 M, 180 M: B not acc. to IEC.
160 L, 180 L, 200 LA: B not acc. to IEC.
Above table gives the main dimensions in mm.
60
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
M2AA 225-250
Dimension drawings
Foot-mounted motor; IM B3 (IM 1001), IM 1002
AA
AB
AC
AE
B5)
225 M-2
356
64
416
386
243
2867) 311
225 S-4
356
64
416
386
243
286
225 M-4
356
64
416
386
243
2867) 311
250 M-2
406
76
472
425
243
250 M-4
406
76
472
425
243
Motor
size
FA
GA
GB
GC
225 M-2
16
14
49
59
39.5
48.5
225 25
225 S-4
18
14
53
64
39.5
48.5
225 25
225 M-4
18
14
53
64
39.5
48.5
250 M-2
18
16
53
64
49
250 M-4
18
16
58
69
49
Motor
size
VE3)
VE4)
225 M-2
143
126.5
225 S-4
143
126.5
225 M-4
143
126.5
250 M-2
143
126.5
250 M-4
143
126.5
BA
BB
CA
CA
CB
DA
DB
DC
EA
EG
EH
81.5 365
149
238
213
27
55
45
110
42
36
149
238
213
27
60
45
110
42
36
81.5 365
149
278
253
27
60
45
110
42
36
3117) 349
99.5 409
168
256
218
30
60
55
110
42
42
3117) 349
99.5 409
168
256
218
30
65
55
110
42
42
525.5 221
18
525.5 221
18
225 25
525.5 221
59
250 40
571
59
250 40
571
Tolerances
A, B
C, CA
DA 45
D, DA 55-65
F, FA
H
HA HD
HE
2)
ISO js14
0 +2
ISO k6
ISO m6
ISO h9
+0 - 0.5
3)
4)
5)
6)
7)
8)
LC
UB2)
VA
VB
773 893
2xFL 13
75.5
803 923
2xFL 13
75.5
18
843 963
2xFL 13
241
22
866 985
241
22
866 985
VC3)
VC4)
VD3)
VD4)
243 109.5
81.5
176.5 171.5
243 109.5
81.5
176.5 171.5
75.5
243 109.5
81.5
176.5 171.5
2xFL 13
93.5
243 109.5
81.5
176.5 171.5
2xFL 13
93.5
243 109.5
81.5
176.5 171.5
Flange opening is provided with pipe ange FL 13, with tapped lead-in
holes plugged with sealing plugs.
Single- and two-speed motors: 2 x M40 + M16.
Motors for 230 V 50 Hz have pipe ange FL 21 and 2 x M63 + M16.
For ange opening FL 13: 2 x M40 + M16.
For extra large terminal box with ange opening FL 21: 2 x M63 + M16.
Basic design only.
Dimension CB = 30 for high output design.
Not according to IEC for M.
Not according to IEC for S.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
61
M2AA 225-250
Dimension drawings
Flange-mounted motor; IM B5 (IM 3001), IM 3002
AC
AE
DA
DB
DC
E2)
EA
EG
EH
FA
GA
GB
GC
HB
HE
225 M-2
386
243
55
45
M20
M16
110
110
42
36
16
14
49
59
39.5
48.5
300.5
221
225 S-4
386
243
60
45
M20
M16
140
110
42
36
18
14
53
64
39.5
48.5
300.5
221
225 M-4
386
243
60
45
M20
M16
140
110
42
36
18
14
53
64
39.5
48.5
300.5
221
250 M-2
425
243
60
55
M20
M20
140
110
42
42
18
16
53
64
49
59
321
241
250 M-4
425
243
65
55
M20
M20
140
110
42
42
18
16
58
69
49
59
321
241
Motor
size
LA
LB
LC
UB3)
VA
VB
VC4)
VC5)
VD4)
VD5)
VE4) VE5)
225 M-2
773
22
663
893
400
350
450
19
2 x FL 13
75.5
243
109.5
81.5
176.5
171.5
143 126.5
225 S-4
803
22
663
923
400
350
450
19
2 x FL 13
75.5
243
109.5
81.5
176.5
171.5
143 126.5
225 M-4
843
22
703
963
400
350
450
19
2 x FL 13
75.5
243
109.5
81.5
176.5
171.5
143 126.5
250 M-2
866
22
725
985
500
450
550
19
2 x FL 13
93.5
243
109.5
81.5
176.5
171.5
143 126.5
250 M-4
866
22
725
985
500
450
550
19
2 x FL 13
93.5
243
109.5
81.5
176.5
171.5
143 126.5
Tolerances
DA 45
D, DA 55-60
F, FA
N
2)
ISO k6
ISO m6
ISO h9
ISO js6
3)
4)
5)
Shoulder of shaft extension and contact surface of ange are in the same plane.
Flange opening is provided with pipe ange FL 13, with tapped lead-in holes plugged with sealing plugs.
Single- and two-speed motors: 2 x M40 + M16.
Motors for 230 V 50 Hz have pipe ange FL 21 and
2 x M63 + M16.
For ange opening FL 13: 2 x M40 + M16.
For extra large terminal box with ange opening
FL 21: 2 x M63 + M16.
62
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
M2AA 225-250
Dimension drawings
Foot- and ange-mounted motor; IM B35 (IM 2001), IM 2002
225 M-2
356 64 416
213 27
36 16 14 49 59
225 S-4
356 64 416
213 27
36 18 14 53 64
225 M-4
356 64 416
253 27
36 18 14 53 64
250 M-2
406 76 472
218 30
42 18 16 53 64
250 M-4
406 76 472
218 30
42 18 16 58 69
AA AB
AC
AE
BA
BB C
CA
CA
CB D
DA DB
DC
E5)
EA
EG EH F
FA G
GA
Motor
size
GB
225 M-2
39.5 48.5 225 25 525.5 221 18 773 22 663 893 400 350 450 19 5
2 x FL 13 75.5
225 S-4
39.5 48.5 225 25 525.5 221 18 803 22 663 923 400 350 450 19 5
2 x FL 13 75.5
GC
HA HD
HE
LA LB
LC
N1)
UB2)
VA
VB
VC3)
VC4) VD3)
VD4)
225 M-4
39.5 48.5 225 25 525.5 221 18 843 22 703 963 400 350 450 19 5
2 x FL 13 75.5
250 M-2
49
59
250 40 571
2 x FL 13 93.5
250 M-4
49
59
250 40 571
2 x FL 13 93.5
Motor
size
VE3)
VE4)
225 M-2
143
126.5
225 S-4
143
126.5
225 M-4
143
126.5
250 M-2
143
126.5
250 M-4
143
126.5
Tolerances
A, B
C, CA
D 44
D, DA 55-65
F, FA
H
2)
ISO js14
0 +2
ISO k6
ISO m6
ISO h9
+0 -0.5
3)
4)
5)
Flange opening is provided with pipe ange FL 13, with tapped lead-in holes
plugged with sealing plugs, 2 x M40 + M16.
For ange opening FL 13: 2 x M40 + M16.
For extra large terminal box with ange opening FL 21: 2 x M63 + M16.
Shoulder of shaft extension and contact surface of ange are in the same plane.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
63
M3AA 160-180
Dimension drawings
Foot-mounted motor; IM B3 (IM 1001), IM 1002
160 3)
254 56
160 4)
254 56
180 5)
180 6)
AA
AB
AC
AE
B7)
B7)
BB
BC C
287.5
86
287.5
86
316
316
Motor
size
FA
GA
GB
GC
160 3)
10
37
45
27
35
160 20
160 4)
10
37
45
27
35
160 20
180 5)
10
42.5
51.5 27
35
180 6)
10
42.5
51.5 27
35
Tolerances
A, B
ISO js14
C, CA +2 -2
D, DA ISO k6
F, FA ISO h9
H
+0 -0.5
2)
3)
4)
5)
6)
7)
HA
BA
HC
HD
DA
DB
DC
42
32
M16
42
32
M16
88
121 218
180
25
48
32
88
121 238
200
25
48
32
HE
CA
CA
CB
EG
EH
M12 110 80
36
28
12
M12 110 80
36
28
12
M16
M12 110 80
36
28
14
M16
M12 110 80
36
28
14
VC
EA
LC
UB12)
UB22) VA
VB
VD
VE
15
602.5
693.5
2*M40
M16
89
210 84.5
134.5 167.5
15
643.5
734.5
2*M40
M16
89
210 84.5
134.5 167.5
180 20
15
680
770
2*M40
M16
77.5
210 84.5
134.5 167.5
180 20
15
700.5
790
2*M40
M16
77.5
210 84.5
134.5 167.5
Knockout openings.
M-2, MA-2, M-4, M-6, M-8, MA-8, L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4, M-4/6, M-4/8, LB-2, LB-4
L-8, L-4/6, L-4/8, LB-6, LB-8
M-2, M-4, L-6, L-8, M-2/4, M-4/6, M-4/8, LB-2
L-4, L-2/4, L-4/6, L-4/8, LB-4, LB-6, LB-8
160 M, 180 M: B not acc. to IEC
160 L, 180 L: B not acc. to IEC
64
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
M3AA 160-180
Dimension drawings
Flange-mounted motor; IM B5 (IM 3001), IM 3002
AC
AE
DA
DB
DC
E7)
EA
EG
EH
FA
GA
GB
GC
HB
HE
160 3)
310
210
42
32
M16
M12
110
80
36
28
12
10
37
45
27
35
210
130
160 4)
310
210
42
32
M16
M12
110
80
36
28
12
10
37
45
27
35
210
130
180 5)
360
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
225
145
180 6)
360
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
225
145
Motor
size
LA
LB
LC
160 3)
602.5
16
160 4)
643.5
16
180 5)
680
180 6)
700.5
Tolerances
D, DA ISO k6
F, FA ISO h9
N
ISO j6
UB12)
UB22) VA
VB
VC
VD
VE
492.5 693.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
533.5 734.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
21
570
770
300
250
350
19
2*M40
M16
77.5
210
79.5
134.5
171.5
21
590.5 790
300
250
350
19
2*M40
M16
77.5
210
79.5
134.5
171.5
2)
3)
4)
5)
6)
7)
Knockout openings.
M-2, MA-2, M-4, M-6, M-8, MA-8, L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4, M-4/6, M-4/8, LB-2, LB-4
L-8, L-4/6, L-4/8, LB-6, LB-8
M-2, M-4, L-6, L-8, M-2/4, M-4/6, M-4/8, LB-2
L-4, L-2/4, L-4/6, L-4/8, LB-4, LB-6, LB-8
Shoulder of shaft extension and contact surface of ange are in the same plane.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
65
M3AA 160-180
Dimension drawings
Foot- and ange-mounted motor; IM B35 (IM 2001), IM 2002
AA
AB
AC
AE
B8)
B8)
BA
BB
160 3)
254
56
310
310
210
210
254
55
160 4)
254
56
310
310
210
210
254
55
180 5)
279
65.5
340
360
210
241
279
180 6)
279
65.5
340
360
210
241
279
Motor
size
E7)
EA
EG
EH
FA
160 3)
110
80
36
28
12
10
160 4)
110
80
36
28
12
10
180 5)
110
80
36
28
14
180 6)
110
80
36
28
14
Motor
size
LA
LB
LC
160 3)
16
492.5
693.5
300
250
160 4)
16
533.5
734.5
300
250
180 5)
21
570
770
300
180 6)
21
590.5
790
300
Tolerances
A, B
ISO js14
C, CA +0 -2
D, DA ISO k6
F, FA ISO h9
H
+0 - 0.5
N
ISO j6
2)
3)
4)
5)
6)
7)
8)
BC
CA
287.5 86
108
287.5 86
108
58
316
88
58
316
GA
37
37
10
10
CA
CB
DA
DB
DC
185.5 141.5
20
42
32
M16
M12
226.5 182.5
20
42
32
M16
M12
121
218
180
25
48
32
M16
M12
88
121
238
200
25
48
32
M16
M12
GB
GC
HA
HB
HC
HD
HE
45
27
35
160
20
210
325
370
130
15
602.5
45
27
35
160
20
210
325
370
130
15
643.5
42.5
51.5
27
35
180
20
225
360
405
145
15
680
42.5
51.5
27
35
180
20
225
360
405
145
15
700.5
UB12)
UB22)
VA
VB
VC
VD
VE
350 19
2*M40
M16
89
210
79.5
134.5
171.5
350 19
2*M40
M16
89
210
79.5
134.5
171.5
250
350 19
2*M40
M16
77.5
210
79.5
134.5
171.5
250
350 19
2*M40
M16
77.5
210
79.5
134.5
171.5
Knockout openings.
M-2, MA-2, M-4, M-6, M-8, MA-8, L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4, M-4/6, M-4/8, LB-2, LB-4.
L-8, L-4/6, L-4/8, LB-6, LB-8.
M-2, M-4, L-6, L-8, M-2/4, M-4/6, M-4/8, LB-2.
L-4, L-2/4, L-4/6, L-4/8, LB-4, LB-6, LB-8.
Shoulder of shaft extension and contact surface of ange are in the same plan.
160 M, 180 M: B not acc. to IEC.
160 L, 180 L: B not acc. to IEC.
66
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
M3AA 200-225
Dimension drawings
Foot-mounted motor; IM B3 (IM 1001), IM 1002
2
Dimension AD and HD refer to side mounted
terminal box, see page 73.
AA AB
AC
AE
BA
BB
CA
CA
CB
DA DB
DC
ED)
EA
EG EH
FA
2001)
2002)
2253)
2254)
2255)
2256)
318
318
356
356
356
356
64
64
69
69
69
69
386
386
425
425
425
425
243
243
243
243
243
243
267
267
286
286
286
286
305
305
311
311
311
311
98
98
84
84
84
84
365
365
360
360
360
360
133
133
149
149
149
149
273
313
300
325
300
325
235
275
275
300
275
300
30
30
24.5
24.5
24.5
24.5
55
55
55
55
60
60
45
45
55
55
55
55
M16
M16
M20
M20
M20
M20
110
110
110
110
140
140
110
110
110
110
110
110
42
42
42
42
42
42
16
16
16
16
18
18
14
14
16
16
16
16
Motor
size
GA GB
GC
HA HDB)
HDC) HE
LC
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB) VEC)
2001)
2002)
2253)
2254)
2255)
2256)
49
49
49
49
53
53
59
59
59
59
64
64
48.5
48.5
59
59
59
59
200
200
225
225
225
225
25
25
25
25
25
25
533
533
578
578
578
578
18
18
18
18
18
18
774
814
836
861
866
891
893
933
955
980
985
1100
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
75.5
75.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
109.5
109.5
109.5
109.5
109.5
109.5
81.5
81.5
81.5
81.5
81.5
81.5
176.5
176.5
176.5
176.5
176.5
176.5
171.5
171.5
171.5
171.5
171.5
171.5
143
143
143
143
143
143
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
380
380
418
418
418
418
39.5
39.5
49
49
49
49
1)
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
2)
3)
4)
5)
6)
500.5
500.5
546
546
546
546
224
224
244.5
244.5
244.5
244.5
A)
B)
C)
D)
M20
M20
M20
M20
M20
M20
36
36
42
42
42
42
126.5
126.5
126.5
126.5
126.5
126.5
67
M3AA 200-225
Dimension drawings
Flange-mounted motor; IM B5 (IM 3001), IM 3002
M3AA 200
M3AA 225
IM B5 (IM 3001), IM 3002
Motor
size
AC
AE
DA
DB
DC
ED)
EA
EG
EH
FA
GA
GB
GC
HBB)
HBC)
HE
2001)
2002)
2253)
2254)
2255)
2256)
386
386
425
425
425
425
243
243
243
243
243
243
55
55
55
55
60
60
45
45
55
55
55
55
M20
M20
M20
M20
M20
M20
M16
M16
M20
M20
M20
M20
110
110
110
110
140
140
110
110
110
110
110
110
42
42
42
42
42
42
36
36
42
42
42
42
16
16
16
16
16
16
14
14
16
16
16
16
49
49
49
49
53
53
59
59
59
59
64
64
39.5
39.5
49
49
49
49
48.5
48.5
59
59
59
59
301
301
321
321
321
321
333
333
353
353
353
353
224
224
244.5
244.5
244.5
244.5
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB)
350
350
400
400
400
400
300
300
350
350
350
350
400
400
450
450
450
450
19
19
19
19
19
19
5
5
5
5
5
5
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
75.5
75.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
109.5
109.5
109.5
109.5
109.5
109.5
81.5
81.5
81.5
81.5
81.5
81.5
176.5
176.5
176.5
176.5
176.5
176.5
171.5
171.5
171.5
171.5
171.5
171.5
143
143
143
143
143
143
Motor
size
LA
LB
200
2002)
2253)
2254)
2255)
2256)
774
814
836
861
866
891
20
20
22
22
22
22
664
704
726
751
726
751
1)
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
LC
893
933
955
980
985
1100
1)
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
2)
3)
4)
5)
6)
A)
B)
C)
D)
VEC)
126.5
126.5
126.5
126.5
126.5
126.5
68
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
M3AA 200-225
Dimension drawings
Foot- and ange-mounted motor; IM B35 (IM 2001), IM 2002
M3AA 200
M3AA 225
AA
AB
200
1)
318
64
2002)
318
64
2253)
356
2254)
356
2255)
2256)
AC
AE
380 386
243
267
380 386
243
267
69
418 425
243
69
418 425
243
356
69
418 425
356
69
418 425
BA
DC
ED)
EA
EG EH F
FA G
GA GB
GC
BB
CA
CA
CB
DA DB
305 98
365
133
273 235
30
55
49 59
39.5 48.5
305 98
365
133
313 275
30
55
49 59
39.5 48.5
286
311 84
360
149
300 275
25
55
49 59
49
59
286
311 84
360
149
325 300
25
55
49 59
49
59
243
286
311 84
360
149
300 275
25
60
53 64
49
59
243
286
311 84
360
149
325 300
25
60
53 64
49
59
Motor
size
2001)
200 25
20 664
2002)
200 25
20 704
2253)
225 25
2254)
225 25
2255)
2256)
UBA)
VA
VB
2xFL13
75.5
2xFL13
75.5
22 726
2xFL13
93.5
22 751
2xFL13
93.5
225 25
22 726
2xFL13
93.5
225 25
22 751
2xFL13
93.5
Tolerances
A,B
ISO js14
C, CA
+0 -2
D 55-65 ISO m6
DA 45-55 ISO k6
F, FA
ISO h9
H
+0 -0.5
N
ISO j6
1)
2)
3)
4)
5)
6)
LA LB
LC M
A)
B)
C)
D)
VDC)
VEB) VEC)
143 126.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
69
M3AA 250-280
Dimension drawings
Foot-mounted motor; IM B3 (IM 1001), IM 1002
2
Dimension AD and HD refer to side mounted
terminal box, see page 73.
AA
AB
AC
AE
BA
BB
CA
CA
CB
DA DB
DC
ED)
EA
EG EH
2501)
2502)
2503)
2504)
2805)
2806)
2807)
2808)
406
406
406
406
457
457
457
457
78
78
78
78
102.5
102.5
102.5
102.5
474
474
474
474
525
525
525
525
471
471
471
471
471
471
471
471
243
243
243
243
243
243
243
243
311
311
311
311
368
368
368
368
349
349
349
349
419
419
419
419
94.5
94.5
94.5
94.5
90.5
90.5
90.5
90.5
409
409
409
409
489
489
489
489
168
168
168
168
190
190
190
190
263
288
263
263
184
209
184
209
225
250
225
225
133
158
133
160
40
40
30
30
37.5
37.5
37.5
37.5
60
60
65
65
65
65
75
75
55
55
55
55
55
55
55
55
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
110
110
110
110
110
110
110
110
42
42
42
42
42
42
42
42
18
18
18
18
18
18
20
20
Motor
size
GA
GB GC H
2501)
2502)
2503)
2504)
2805)
2806)
2807)
2808)
53
53
58
58
58
58
67.5
67.5
64
64
69
69
69
69
79.5
79.5
49
49
49
49
49
49
49
49
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
59
59
59
59
59
59
59
59
250
250
250
250
280
280
280
280
1)
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
2)
3)
4)
5)
6)
7)
8)
M20
M20
M20
M20
M20
M20
M20
M20
42
42
42
42
42
42
42
42
FA
16
16
16
16
16
16
16
16
HA HDB) HDC) HE
LC
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB) VEC)
40
40
30
30
40
40
40
40
22
22
22
22
24
24
24
24
875
900
875
900
875
900
875
900
992
1017
992
1017
992
1017
992
1017
2xFL13
2xFL13
2xFL13
2xFL13
2xFL21
2xFL21
2xFL21
2xFL21
93.5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
243
243
109.5
109.5
109.5
109.5
-
81.5
81.5
81.5
81.5
76.5
76.5
76.5
76.5
176.5
176.5
176.5
176.5
-
171.5
171.5
171.5
171.5
166.5
166.5
166.5
166.5
143
143
143
143
-
594
594
594
594
-
626
626
626
626
656
656
656
656
267.5
267.5
267.5
267.5
283.5
283.5
283.5
283.5
A)
B)
C)
D)
126.5
126.5
126.5
126.5
121.5
121.5
121.5
121.5
70
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
M3AA 250-280
Dimension drawings
Flange-mounted motor; IM B5 (IM 3001), IM 3002
2
M3AA 250-280
AC
AE
DA
DB
DC
ED)
EA
EG
EH
FA
GA
GB
GC
HBB)
HBC)
2507)
2508)
2509)
25010)
28011)
28012)
28013)
28014)
471
471
471
471
471
471
471
471
243
243
243
243
243
243
243
243
60
60
65
65
65
65
75
75
55
55
55
55
55
55
55
55
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
110
110
110
110
110
110
110
110
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
18
18
18
18
18
18
20
20
16
16
16
16
16
16
16
16
53
53
58
58
58
58
67.5
67.5
64
64
69
69
69
69
79.5
79.5
49
49
49
49
49
49
49
49
59
59
59
59
59
59
59
59
344
344
344
344
-
376
376
376
376
376
376
376
376
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB)
VEC)
500
500
500
500
500
500
500
500
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
2xFL13
2xFL13
2xFL13
2xFL13
2xFL21
2xFL21
2xFL21
2xFL21
93.5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
243
243
109.5
109.5
109.5
109.5
-
81.5
81.5
81.5
81.5
76.5
76.5
76.5
76.5
176.5
176.5
176.5
176.5
-
171.5
171.5
171.5
171.5
166.5
166.5
166.5
166.5
143
143
143
143
-
126.5
126.5
126.5
126.5
121.5
121.5
121.5
121.5
HE
267.5
267.5
267.5
267.5
283.5
283.5
283.5
283.5
Motor
size
LA
LB
2501)
2502)
2503)
2504)
2805)
2806)
2807)
2808)
875
900
875
900
875
900
875
900
25
25
25
25
25
25
25
25
735
760
735
760
735
760
735
760
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
LC
992
1017
992
1017
992
1017
992
1017
1)
2)
3)
4)
5)
6)
7)
8)
A)
B)
C)
D)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
71
M3AA 250-280
Dimension drawings
Foot- and ange-mounted motor; IM B35 (IM 2001), IM 2002
2
M3AA 250-280
IM B35 (IM 2001), IM 2002
Motor
size
2501)
2502)
2503)
2504)
2805)
2806)
2807)
2808)
A
406
406
406
406
457
457
457
457
AA
78
78
78
78
103
103
103
103
Motor
size
250
2502)
2503)
2504)
2805)
2806)
2807)
2808)
250
250
250
250
280
280
280
280
40
40
30
30
40
40
40
40
1)
Tolerances
A,B
ISO js14
C, CA
+0 -2
D 55-65 ISO m6
DA 45-55 ISO k6
F, FA
ISO h9
H
+0 -0.5
N
ISO js6
AB
474
474
474
474
525
525
525
525
344
344
344
344
-
AC
471
471
471
471
471
471
471
471
376
376
376
376
376
376
376
376
AE
243
243
243
243
243
243
243
243
594
594
594
594
-
B
311
311
311
311
368
368
368
368
626
626
626
626
656
656
656
656
1)
2)
3)
4)
5)
6)
7)
8)
B
349
349
349
349
419
419
419
419
268
268
268
268
284
284
284
284
BA
94.5
94.5
94.5
94.5
90.5
90.5
90.5
90.5
BB
409
409
409
409
489
489
489
489
C
168
168
168
168
190
190
190
190
LA
LB
22
22
22
22
24
24
24
24
875
900
875
900
875
900
875
900
25
25
25
25
25
25
25
25
735
760
735
760
735
760
735
760
CA
263
288
263
263
184
209
184
209
CA
225
250
225
225
133
158
133
160
LC M
992
1017
992
1017
992
1017
992
1017
500
500
500
500
500
500
500
500
CB
40
40
30
30
38
38
38
38
D
60
60
65
65
65
65
75
75
DA
55
55
55
55
55
55
55
55
DB
M20
M20
M20
M20
M20
M20
M20
M20
T UBA)
VA
VB
VDC)
VEB) VEC)
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
243
243
110
110
110
110
-
171.5
171.5
171.5
171.5
166.5
166.5
166.5
166.5
143
143
143
143
-
A)
B)
C)
D)
DC
M20
M20
M20
M20
M20
M20
M20
M20
2xFL13
2xFL13
2xFL13
2xFL13
2xFL21
2xFL21
2xFL21
2xFL21
ED)
140
140
140
140
140
140
140
140
EA
110
110
110
110
110
110
110
110
EG
42
42
42
42
42
42
42
42
EH
42
42
42
42
42
42
42
42
F
18
18
18
18
18
18
20
20
81.5
81.5
81.5
81.5
76.5
76.5
76.5
76.5
FA
16
16
16
16
16
16
16
16
176.5
176.5
176.5
176.5
-
G
53
53
58
58
58
58
68
68
GA
64
64
69
69
69
69
80
80
GB
49
49
49
49
49
49
49
49
GC
59
59
59
59
59
59
59
59
126.5
126.5
126.5
126.5
121.5
121.5
121.5
121.5
72
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
AD
HB
HD
HE
M2AA
M2AA
M3AA
M3AA
M3AA
332.5
353
376
332.5
353
332.5
353
376
557.5
578
603
578
626
240
260.5
240
260.5
283.5
225 S/M
250 M
200 ML.
225 SM.
250 SM.
Dimensions
AD
HD
On request
300.5
321
344
376
Dimensions
AD
HB
248
269
292
292
123.5
141
141
211.5
226.5
248
269
292
292
HD
235.5
273
273
371.5
406.5
448
494
542
572
412.5
452
494
524
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
73
Accessories
Protective roof and variable speed drives
Protective roof
Tacho
2
Variant
codes
Motor
size
56
63
71
80
90 S
90 L
100 L
1)
Motor
size
112
132
1601)
1802)
1803)
2004)
2005)
225 M
225 S
225 M
250 M
2)
3)
4)
5)
74
183
189
472, 473
572, 573
576, 577
474, 476
477, 574
216
224
261
288
318
343
385
352
373
275
287
313
304
326
352
373
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
005
183
189
472, 473
572, 573
474, 476
477, 574
576, 577
400
484
653.5
653.5
694.5
762.5
783
824
854
894
915
1015.5
1015.5
1056.5
1128.5
1149
1233
1263
1303
1325
493.5
580.5
870.5
870.5
911.5
983.5
1004
1088
1118
1158
1180
458.5
542
697
697
738
806
826.5
867
897
937
960
543.5
630.5
1015.5
1015.5
1056.5
1128.5
1149
1233
1263
1303
1325
On request.
Variant
codes;
M2AA
1)
005
Pole
2-4
2-4
2-4
2-4
4
4
2-4
2
4
4
2-4
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Accessories
Protective roof and variable speed drives
Protective roof
Variant code 005
Tacho
2
Variant
codes;
M3AA
005
183
189
472, 473
572, 573
474, 476
477, 574
576, 577
Motor
size
1121)
400
493.5
458.5
543.5
112
2)
428
538
487
588
1323)
484
580.5
542
630.5
132
522
640
580
690
1605)
653.5
1015.5
870.5
697
1015.5
160
694.5
1056.5
911.5
738
1056.5
1807)
731
1097
952
774
1097
1808)
751.5
1117.5
972.5
795
1117.5
200
825
1234
1089
868
1234
20010)
865
1274
1129
908
1274
225
11)
885
1295
1150
930
1295
22512)
910
1320
1175
955
1320
225
13)
915
1325
1180
960
1325
22514)
940
1350
1205
985
1350
250
15)
922
1346
1201
969
1346
25016)
947
1371
1226
994
1371
280
17)
922
1346
1201
969
1346
28018)
947
1371
1226
994
1371
4)
6)
9)
1)
2)
3)
4)
5)
6)
7)
M-6, M-8,
all 112 excl 1)
SA-2, S-4, S-6, MA-6, MB-6, S-8,
M-8, S-Two-speed
all 132 excl 3)
M-2, MA-2, M-4, M-6, M-8, MA-8,
L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4,
M-4/6, M-4/8, LB-2, LB-4
L-8, L-4/6, L-4/8, LB-6, LB-8.
M-2, M-4, L-6, L-8, M-2/4, M-4/6,
M-4/8, LB-2
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
75
Accessories
Slide rails for motor sizes 112-280
Ymax.
Xmax.
A
D
Version -B-
Motorsize
112-132
160-180
200-225
250-280
1)
Type
TT132/10
TT180/12
TT225/16
TT280/20
A
65
75
82
116
B
40
42
50
70
C
D
530 480
700 630
864 800
1072 1000
E
52
57
68
90
F
17
17
17
20
G
26
26
27
27
H
M12
M12
M16
M18
L
120
120
140
150
M
M10
M12
M16
M20
N
45
50
65
80
O
17
20
weight
Xmax Ymax kg
360 420 7,8
520 580 12,0
670 740 20,4
870 940 43,0
Tolerances
A,B
ISO js14
C, CA
+0 -2
D 55-65 ISO m6
DA 45-55 ISO k6
F, FA
ISO h9
H
+0 -0.5
N
ISO js6
76
Product code
3GZV103001-12
-14
-15
-16
Each set includes two complete slide rails including screw for
mounting the motor on the rails. Screws for mounting the rails
on the foundation are not included. Slide rails are supplied
with unmachined lower surfaces and should, prior to tightenng
down, be supported in a suitable manner.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
56
71
80
90
100
Material
Paint colour shade
Paint
Bearings
Single-speed motor
D-end
N-end
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6201-2Z/C3
6203-2Z/C3
6202-2Z/C3
6204-2Z/C3
6203-2Z/C3
6205-2Z/C3
6204-2Z/C3
6306-2Z/C3
6205-2Z/C3
Bearings
Two-speed motor
D-end
N-end
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6201-2Z/C3
6203-2Z/C3
6202-2Z/C3
6204-2Z/C3
6203-2Z/C3
6205-2Z/C3
6204-2Z/C3
6306-2Z/C3
6205-2Z/C3
Axially-locked
bearings
Bearing seals
D-end
N-end
V-ring
Labyrinth seal.
Material
63
Lubrication
D-end
Terminal box
Material
Surface treatment
Screws
Connections
Knock-out openings
Max Cu-area mm2
Terminal box
1 x M16 x Pg11
2.5
Screw terminal, 6 terminals
Fan
Material
Fan cover
Material
Steel.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Stator winding
temperature sensors
Rotor winding
2 x M20, 2 x Pg16
4
2 x (M20 + M25)
6
Optional.
Material
Diecast aluminum.
Balancing method
Key ways
Closed keyway
Heating elements
On request
8W
Enclosure
IP 55.
Cooling method
IC 411.
Drain holes
Standard.
25 W
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004 /Corr. 2005-04-08
77
Size
M2AA
Stator
Material
Material
Feet
112
132
160
180
200
225
Bearings
D-end
Single-speed motor N-end
Bearings
Two-speed motor
D-end
N-end
NA
NA
Axially-locked
bearings
Bearing seals
D-end
N-end
Connections
Material
Surface treatment
Screws
Screws
Max Cu-area mm2
M5
10
Cable lugs, 6 terminals
M6
35
Fan
Material
Fan cover
Material
Surface treatment
Polypropylene.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Terminal box
Stator winding
temperature sensors
2 x FL13, 2 x M40
2 x FL 21, 2 x M63
(voltage code S)
M10
70
Optional.
Material
PTC thermistors,
150C, 3 in series.
Diecast aluminum.
Balancing method
Key ways
Closed keyway
Heating elements
On request
25 W
50 W
Enclosure
IP 55.
Cooling method
IC 411.
Drain holes
78
6315/C3
6212/C3
Rotor winding
6313/C3
6210/C3
V-ring
Labyrinth seal.
Lubrication
Terminal box
250
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
Size
M3AA
Stator
Material
Material
Feet
112
132
160
180
200
225
250
280
Cast iron
Bearings
D-end
Single-speed motor N-end 2)
N-end 3)
6316/C31)
6213/C3
Bearings
Two-speed motor
D-end
N-end 1)
N-end 2)
NA
Axially-locked
bearings
D-end
Inner bearing cover D-end1)
1)
Foot motor. A spring washer at the N-end presses the motor towards the D-end.
Bearing seals
D-end
N-end
Lubrication
V-ring
Labyrinth seal. Except two-speed motors 112-132M,
outer and inner V-rings.
Valve lubrication.
Grease temp. range -40 to 150C.
Terminal box
Material
Surface treatment
Screws
Connections
2 x (2 x M40 + M16)
Screws
Max Cu-area mm2
M5
10
Cable lugs, 6 terminals
M6
35
Fan
Material
Fan cover
Material
Surface treatment
Polypropylene.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Terminal box
Stator winding
temperature sensors
Rotor winding
Key ways
Closed keyway
On request
2 x FL21
2 x M63
1 x M16
Diecast aluminum.
Balancing method
Heating elements
2 x FL13, 2 x M40
2 x FL 21, 2 x M63
(voltage code S)
M10
70
Optional.
Material
25 W
Enclosure
IP 55.
Cooling method
IC 411.
50 W
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
79
80
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum GB 12-2004
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
Mechanical design................................. 82
Ordering information ............................. 89
Technical data ........................................ 90
Variant codes ......................................... 95
Dimension drawings ............................. 98
Rating plates ........................................ 108
Steel motors in brief ............................ 111
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
81
Mechanical design
Stator
The stator frame is made of prole-pressed sheet steel,
giving the motor high mechanical strength, low weight
and a good surface nish. The stator core is welded into
the stator frame and contributes to its excellent mechanical properties.
Feet and lifting eyes are welded to the stator frame. The
terminal box and end shields are of cast iron.
Drain holes
Terminal box
Terminal boxes are mounted either on the top of the
motor, or on either side of the motor, see ordering
information.
In basic version the terminal box can be rotated 2x180
to allow cable entry from either side of the motor, as
option the terminal box can be turned 4x90.
Degree of protection of standard terminal box is IP 55.
82
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Deviations from standard design according to the following tables are available on request.
Terminal
box
Flange or
adapter
Cable box
or cable gland
Gland
thread
Cable
diameter
Max. connection
cable area
mm2
Terminal
bolt
size
3GZF 294730-749
3GZF 294730-753
3GZF 294730-944
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-501
3GZF 294730-501
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 48-60
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x 60-80
2x150
2x240
4x240
2x240
4x240
2x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
3GZF 294730-749
3GZF 294730-753
3GZF 294730-944
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 48-60
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x 60-80
2x 60-80
2x 60-80
2x 60-80
2x150
2x240
4x240
2x240
4x240
2x240
4x240
4x240
4x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x 48-60
2x 60-80
2x 60-80
2x150
2x240
2x240
2x240
4x240
2x240
4x240
4x240
2x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-501
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x150
2x240
2x240
2x240
4x240
2x240
4x240
4x240
2x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
Voltage/
freq.
code
122/4
142/4
162/4
142/4
162/4
142/4
162/4
162/4
162/9
2x M63x1.5
D
E
122/4
142/4
162/4
142/4
162/4
142/4
162/4
162/4
162/4
162/9
162/4
162/9
2x M63x1.5
D
E
D
E
122/4
142/4
142/4
142/4
162/4
142/4
162/4
162/4
162/4
162/9
162/4
D
E
D
E
D
E
122/4
142/4
142/4
142/4
142/4
142/4
162/4
162/4
142/4
162/4
Voltage/frequency codes:
D - 380-420 VD 50 Hz, 660-690 VY 50 Hz, 440-480 VD 60 Hz
E - 500 VD 50 Hz, 575 VD 60 Hz
Adapter E-D
(standard)
3GZF294730-944
Examples:
Terminal box
Flange with
cable gland
Flange with
cable box
D
E
D
E
Adapter E-2D
(optional)
3GZF294730-945
Cable box
Optional
3GZF294730-301
Cable box
3GZF294730-501
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
83
Terminal
box
Flange or
adapter
Cable box
or cable gland
Gland
thread
Cable
diameter
Max. connection
cable area
mm2
Terminal
bolt
size
3GZF 294730-749
3GZF 294730-753
3GZF 294730-759
3GZF 294730-753
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294703-501
3GZF 294703-501
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 48-60
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x 60-80
2x150
2x240
4x240
2x240
4x240
2x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
3GZF 294730-749
3GZF 294730-753
3GZF 294730-759
3GZF 294730-753
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294703-501
3GZF 294703-501
3GZF 294703-501
3GZF 294703-501
3GZF 294703-501
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 48-60
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x 60-80
2x 60-80
2x 60-80
2x 60-80
2x150
2x240
4x240
2x240
4x240
2x240
4x240
4x240
4x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294703-501
3GZF 294730-301
3GZF 294703-501
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x 48-60
2x 60-80
2x150
2x240
2x240
2x240
4x240
2x240
4x240
4x240
2x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294703-501
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x150
2x240
2x240
2x240
4x240
2x240
4x240
4x240
2x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
Voltage/
freq.
code
122/5
142/6
162/7
142/6
162/7
142/6
162/7
162/7
162/7
2x M63x1.5
D
E
355 LA, LB
355 LKD
400 M_
400 LKA
400 LKB, LKC
122/5
142/6
162/7
142/6
162/7
142/6
162/7
162/7
162/7
162/7
162/7
162/7
2x M63x1.5
D
E
D
E
122/5
142/6
142/6
142/6
162/7
142/6
162/7
162/7
142/6
162/7
D
E
D
E
122/5
142/6
142/6
142/6
162/7
142/6
162/7
162/7
142/6
162/7
D
E
D
D
E
Voltage/frequency codes:
D - 380-420 VD 50 Hz, 660-690 VY 50 Hz, 440-480 VD 60 Hz
E - 500 VD 50 Hz, 575 VD 60 Hz
Examples:
Flange with
cable gland
Adapter when
needed
Cable box
84
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Motor
size
Terminal box
on top on
side
Opening
type
Max. rated
current A
(/Y-conn.)
Max.size
Cable
of conductor gland
mm2
280
122/4
122/5
C (FL 21)
360/210
2x150
2xPg29...42
1x36...52/48...60
MKLN 20
142/4
142/6
D (FL33)
640/370
2x240
1xPg36...42
2xPg36...48
1x36...52/48...60
2x48...60/50...68
2x68.. .80
MKLN 30
315 LC
355, 400
142/4
142/6
D (FL33)
640/370
2x240
1xPg36...42
2xPg36...48
1x36...52/48...60
2x48...60/50...68
2x68.. .80
MKLN 30
162/4
162/7
E-D 1)
950/550
4x240
2xPg36...48
1xPg36...42
1x36...52/48...60
2x48...60/50...68
2x68.. .80
162/4
162/7
E-D 1)
1300/750
4x240
2xPg36...48
1xPg36...42
1x36...52/48...60
2x48...60/50...68
2x68.. .80
162/4
162/7
E-2D 1)
1300/750
4x240
2x2xPg36...48
2x1xPg36...42
2x1x36...52/48...60
2x2x48...60/50...68
2x2x68.m. .80
1)
Cable
box
Blank
plate
Terminal box type 162 is used with a combination of one E-opening and one or two D-openings,
see pictures below and drawing pages.
Terminal box 162 with adapting ange 3GZF 294730501 (E-D) or optional 3GZF 294730-301 (E-2D) :
E-opening
Adapter E-2D
Adapter E-D
D-openings
Adaptor E - D
Opening
C (FL 21)
62
193
62
193
M8
D (FL 33)
100
300
80
292
M10
E (FL 40)
115
370
100
360
M12
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
85
Bearings
The motors are normally tted with single-row deep
groove ball bearings as listed in the table below. The
complete ball bearing designation is stated on the rating
plate.
If the bearing at the D-end is replaced with a roller bearing (NU- or NJ-), higher radial forces can be handled.
Roller bearings are suitable for belt drive applications.
Bearing types
Standard design
Motor
size
280
Number
of poles
2
4-12
315
2
4-12
355
2
4-12
400
2
4-12
1)
On request
Deep groove
ball bearings
D-end
N-end
6316/C4
6316/C3
6316/C4
6319/C3
6316M/C4
6322/C3
6317M/C4
6322/C3
6316/C4
6316/C3
6316/C4
6316/C3
6316M/C4
6319/C3
6317M/C4
6319/C3
Alternative designs
Roller bearings
variant code 037
D-end
1)
NU 316/C3
1)
NU319/C3
1)
NU 322/C3
1)
NU 322/C3
Axially-locked bearings
The outer bearing ring at the D-end is axially locked
with an inner bearing cover. The inner ring is locked by
tight tolerance to the shaft.
All motors are equipped as standard with an axiallylocked bearing at the D-end.
Transport locking
Motors that have roller bearings or an angular contact
ball bearing are tted with a transport lock before despatch to prevent damage to the bearings during transport. In case of transport locked bearing, the motor is
provided with a warning sign.
86
Locking may also be tted in other cases where transport conditions are suspected of being potentially
damaging.
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Bearing seals
M2CA motors have, as standard, V-rings at both ends.
The size and type of suitable seals are in accordance
with the table below:
Motor
size
Number
of poles
d1
d2
B1
280
2
4-12
80
80
100
100
13.5
13.5
315
2
4-12
80
95
100
120
355
2
4-12
95
110
400
2
4-12
95
110
1)
Standard design
Alternative design
Axial seal
D-end
N-end
10
10
VS 80
VS 80
VS 80
VS 80
80x100x101)
80x100x10
13.5
13.5
10
12
VS 80
VS 95
VS 80
VS 80
80x100x101)
95x120x12
120
140
13.5
15.5
12
12
VS 80
VS 110
VS 80
VS 95
80x100x101)
110x140x121)
120
140
13.5
15.5
12
12
VS 85
VS 110
VS 85
VS 95
85x110x121)
110x140x121)
Viton-seal
V-ring
3
Radial
seal
Bearing life
The nominal life L10 of a bearing is dened according
to ISO as the number of operating hours achieved or
exceeded by 90% of identical bearings in a large test
series under certain specied conditions. 50% of the
bearings achieve at least ve times this gure.
Pulley diameter
When the desired bearing life has been determined, the
minimum permissible pulley diameter can be calculated
using FR, as follows:
D=
1.9 107 K P
n FR
where:
D = diameter of pulley, mm
P = power requirement, kW
n = motor speed, r/min
K = belt tension factor, dependent on belt type
and type of duty. A common value for
V-belts is 2.5.
FR = permissible radial force
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
87
Permissible radial and axial force for a bearing life of 40,000 hours
Motor
size
Number
of poles
Length of
shaft
extension
E (mm)
280
2
4
6
8
140
140
140
140
5800
7300
8300
9200
4800
6100
6800
7500
20000
22500
24700
10500
10500
10500
3700
4000
4900
5700
7050
7650
8800
9750
2600
2800
3400
4100
315
2
4
6
8
140
170
170
170
5800
8900
10300
11300
4900
7300
8500
9300
26500
29800
32500
10500
10500
11000
3600
4900
6150
6900
7400
9200
10700
11800
1800
2800
3300
4300
355
2
4
6
8
140
210
210
210
5800
12000
13500
15000
5100
9800
11300
12500
36700
41500
45200
17500
17000
17500
2400
3900
5100
6350
1)
1)
1)
1)
1)
1)
1)
1)
2
4
6
8
170
210
210
210
5800
11800
13600
15100
5100
10200
11700
12900
37300
42000
45700
16700
13500
16800
6700
3450
4750
5700
1)
1)
1)
1)
1)
1)
1)
1)
400
1)
Ball bearing at
point of application:
FX0
FXmax
N
N
Roller bearing at
point of application:
FX0
Xmax
N
N
Direction of force
Outwards Upwards
N
N
Downwards
N
On request
88
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
A
A
B
C
D,E,F, G
B
M2CA 315 SMA 3GCA 312 210 - ADA, 003 etc. C
1-4
5-6 7
8 - 10
11 12 13 14
M2CA 315SMA
4
IM B3 (IM 1001)
132 kW
3GCA312210-ADA
Motor type
Motor size
Product code
D Mounting arrangement code
E Voltage/frequency code
F Generation code
Variant code
=12 poles
= > 12 poles
=Two-speed motors
=Multi-speed motors
Position 8 to 10
Serial number
Position 12
Mounting arrangement
A = Foot-mounted, top-mounted terminal box
R = Foot-mounted, terminal box RHS seen from D-end
L = Foot-mounted, terminal box LHS seen from D-end
B = Flange-mounted, large ange
H = Foot- and ange-mounted, top-mounted terminal
box
S = Foot- and ange-mounted, terminal box RHS seen
from D-end
T = Foot- and ange-mounted, terminal box LHS seen
from D-end
Position 13
Voltage and frequency code
See table below
Position 14
Generation code = A
Position 11
- (dash)
Code letters for supplementing the product code for voltage and frequency:
A
380 VY 50 Hz
B
380 V 50 Hz
D
380-420 V 50 Hz
660-690 VY 50 Hz
440-480 V 60 Hz
E
500 V 50 Hz
575 V 60 Hz
F
500 VY 50 Hz
575 VY 60 Hz
S
220-240 V 50 Hz
380-420 VY 50 Hz
440-480 VY 60 Hz
T
660 V 50 Hz
U
690 V 50 Hz
X
Other rated voltage,
connection or frequency,
max. 690 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
H
415 V 50 Hz
89
Output
kW
Motor type
Product code
75
90
110
132
160
200
200
250
280
315
355
400
450
500
560
2)
1)
1)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
355 SA
315 LA
355 MA
355 MB
355 LA
355 LB
400 MLA
400 MLB
400 LKA
400 LKB
2)
2)
M2CA
M2CA
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
315 LB
315 LC
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
281 110-A
281 210-A
311 110-A
311 210-A
311 320-A
351 110-A
311 510-A
351 310-A
351 320-A
351 510-A
351 520-A
401 410-A
401 420-A
401 510-A
401 520-A
132
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
2977
2975
2982
2982
2981
2977
2978
2980
2978
2980
2977
2982
2980
2984
2983
2.3
2.3
2.0
2.2
2.3
1.3
2.6
1.3
1.1
1.3
1.0
0.8
0.8
0.7
0.7
3.30
2.90
3.00
3.00
3.00
2.80
3.00
3.00
2.70
3.30
3.10
3.00
3.00
3.40
3.40
94.9
95.1
95.1
95.4
96.1
95.5
96.3
96.1
96.1
96.6
96.0
96.6
96.6
96.6
96.7
3GCA
3GCA
3GCA
3GCA
3GCA
281 320-A
281 330-A
281 340-A
311 520-A
311 530-A
2977
2976
2975
2980
2982
95.8
96.0
96.0
96.5
96.8
Torque
Basic design
94.6
94.9
94.4
94.9
95.6
95.1
95.9
95.7
95.9
96.4
95.9
96.5
96.5
96.5
96.6
0.88
0.90
0.86
0.88
0.89
0.92
0.90
0.92
0.92
0.93
0.92
0.92
0.92
0.91
0.92
131
152
194
228
269
330
334
410
470
510
575
655
730
815
910
400 V 50 Hz
Power
400 V 50 Hz
Speed
r/min
Efciency
7.5
7.6
7.6
7.4
7.5
6.6
7.8
6.6
5.7
7.7
7.0
7.6
7.4
7.2
7.3
241
289
352
423
513
641
641
801
897
1009
1138
1281
1442
1600
1792
High-output design
95.5
95.7
95.7
96.2
96.6
0.90
0.91
0.91
0.90
0.90
184
222
266
420
528
400 V 50 Hz
7.9
7.7
7.9
8.1
8.9
353
424
514
801
1009
2.4
2.6
2.8
2.8
3.4
3.0
3.0
3.1
2.9
3.1
Basic design
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
1483
1484
1487
95.0
95.2
95.4
94.9
95.1
95.1
0.84
0.85
0.85
137
163
198
6.8
7.1
6.9
483
579
706
2.4
2.7
2.1
2.8
2.9
2.8
M2CA
315 SMA
1486
95.6
95.5
0.85
238
6.7
848
2.2
2.7
160
2)
M2CA
315 MB
1486
96.0
95.9
0.86
282
7.2
1028
2.4
2.9
200
2)
M2CA
315 LA
1486
96.2
96.2
0.86
351
7.2
1285
2.5
2.9
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
355 SA
355 MA
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
1487
1487
1488
1489
1489
1489
1489
1489
1489
95.8
96.5
96.5
96.5
96.7
96.7
96.8
96.9
96.9
95.6
96.4
96.4
96.4
96.5
96.6
96.7
96.8
96.8
0.87
0.87
0.87
0.88
0.88
0.90
0.89
0.90
0.87
345
430
545
605
680
740
830
925
1080
7.0
7.2
7.4
7.2
7.5
6.9
7.3
6.6
6.9
1284
1605
2021
2276
2565
2886
3206
3591
4040
2.1
2.3
2.4
1.4
1.5
1.2
1.3
1.1
1.2
2.7
2.8
2.8
3.0
3.0
2.8
2.9
2.6
2.8
200
250
315
355
400
450
500
560
630
1)
352 110-A
352 310-A
352 510-A
352 520-A
352 540-A
402 410-A
402 420-A
402 510-A
402 520-A
400 V 50 Hz
High-output design
110
M2CA
280 MB
1483
95.3
95.2
0.86
195
7.5
708
2.7
2.8
132
M2CA
280 MC
1483
95.6
95.5
0.86
235
7.1
850
2.8
2.9
160
M2CA
280 MD
1483
95.8
95.7
0.86
283
7.1
1030
2.8
3.1
250
M2CA
315 LB
1487
96.1
96.0
0.85
445
7.4
1605
2.5
2.9
M2CA
315 LC
1487
96.4
96.2
0.85
560
7.8
2023
2.6
3.2
315
1)
2)
90
2)
The two bullets in the product code indicate choice of mounting arrangement, voltage and frequency (see ordering information page).
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Output kW
Motor type
Speed
r/min
Power Current
factor IN
EfEfciency cos
Speed ciency
%
100% A
r/min
%
380 V 50 Hz
75
90
110
132
160
200
200
250
280
315
355
400
450
500
560
2974
2970
2980
2980
2979
2975
2977
2978
2975
2976
2972
2980
2978
2982
2981
1)
1)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
355 SA
315 LA
355 MA
355 MB
355 LA
355 LB
400 MLA
400 MLB
400 LKA
400 LKB
94.8
95.1
95.1
95.4
96.1
95.4
96.3
96.0
96.0
96.5
96.0
96.5
96.6
96.6
96.7
380 V 50 Hz
110
132
160
250
315
2974
2972
2971
2977
2979
2)
2)
M2CA
M2CA
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
315 LB
315 LC
95.7
95.9
95.9
96.4
96.8
380 V 50 Hz
75
90
110
132
160
200
200
250
315
355
400
450
500
560
630
1481
1482
1486
1485
1485
1484
1485
1486
1486
1487
1487
1487
1488
1487
1488
1)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
94.8
95.1
95.3
95.5
95.9
96.1
95.7
96.4
96.4
96.4
96.6
96.6
96.7
96.8
96.8
Power
factor
cos
100%
Current
IN
A
415 V 50 Hz
0.89
0.90
0.87
0.89
0.90
0.92
0.90
0.92
0.92
0.93
0.92
0.92
0.92
0.92
0.92
137
159
202
238
282
350
350
430
495
540
605
680
770
850
965
2980
2978
2983
2983
2982
2979
2981
2982
2980
2982
2974
2983
2982
2985
2984
94.8
95.1
0.0
95.7
96.1
95.5
96.3
96.1
96.1
96.6
96.1
96.5
96.6
96.6
96.8
Basic design
0.87
0.89
0.85
0.87
0.89
0.91
0.90
0.92
0.92
0.92
0.92
0.92
0.92
0.91
0.91
127
147
190
222
262
325
321
395
450
495
550
630
700
790
885
415 V 50 Hz
0.91
0.91
0.91
0.90
0.90
193
233
280
442
550
2979
2978
2977
2982
2983
95.8
96.0
96.0
96.5
96.8
142
169
204
245
294
365
360
455
570
630
710
770
870
965
1125
1485
1486
1488
1487
1487
1487
1488
1488
1489
1490
1490
1490
1490
1490
1490
95.0
95.2
95.3
95.5
96.0
96.2
95.8
96.5
96.5
96.5
96.7
96.7
96.8
96.9
96.9
0.8
0.9
1.2
1.4
1.7
3.2
2.1
3.8
3.8
4.8
4.8
7.2
7.2
8.5
8.5
480
545
695
770
840
1220
975
1320
1320
1530
1550
2300
2300
2700
2700
77
77
80
80
80
83
80
83
83
83
83
85
85
85
85
0.90
0.90
0.90
0.89
0.90
179
213
255
404
508
1.15
1.4
1.55
2.65
3.3
580
755
810
1230
1410
77
77
77
80
80
Basic design
0.82
0.83
0.83
0.84
0.85
0.85
0.86
0.86
0.86
0.87
0.87
0.90
0.89
0.90
0.87
134
159
198
232
277
342
340
420
530
590
660
720
800
890
1040
445
490
675
730
850
970
1220
1350
1550
1550
1900
2400
2400
2700
2800
68
68
71
71
71
71
80
80
80
80
85
85
85
85
85
380 V 50 Hz
110
M2CA 280 MB
1481
95.2
0.87
204
1486
95.5
0.84
193
1.7
550
68
132
M2CA 280 MC
1481
95.4
0.87
245
1485
95.7
0.85
227
2.3
775
70
160
M2CA 280 MD
1482
95.6
0.87
295
1485
95.8
0.85
276
2.5
820
70
250
M2CA 315 LB
1485
95.9
0.86
463
1488
96.2
0.84
434
4.4
1200
78
M2CA 315 LC
1485
96.1
0.86
582
1489
96.4
0.84
548
5.5
1380
78
2)
415 V 50 Hz
1.15
1.4
2
2.3
2.9
3.5
5.5
6.5
7.8
7.8
10
13
13
14
15
315
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
High-output design
415 V 50 Hz
0.86
0.86
0.86
0.86
0.87
0.87
0.87
0.87
0.87
0.89
0.89
0.90
0.90
0.91
0.88
Moment of
Sound
inertia
pressure
J = GD2 Weight level LP
kgm2
kg
dB(A)
High-output design
91
Output
kW
Motor type
Product code
45
55
75
90
110
132
132
160
200
250
315
355
400
450
500
1)
1)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
355 SA
315 LA
355 SB
355 MA
355 MB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
200
2)
2)
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
2.5
2.5
2.3
2.3
2.5
1.7
2.4
1.8
2.0
2.2
2.0
1.2
1.2
1.3
1.3
2.5
2.5
2.7
2.7
2.8
2.6
2.7
2.7
2.8
3.0
3.0
2.7
2.7
2.8
2.8
400 V 50 Hz
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
283 110-A
283 210-A
313 110-A
313 210-A
313 320-A
353 110-A
313 510-A
353 120-A
353 310-A
353 320-A
353 540-A
403 410-A
403 420-A
403 510-A
403 520-A
990
989
992
991
991
992
990
992
993
991
991
992
992
993
992
Speed
r/min
Efciency
94.1
94.4
94.9
95.3
95.3
95.3
95.4
95.9
95.9
95.9
96.2
96.4
96.5
96.5
96.5
Torque
Basic design
94.0
94.3
94.7
95.2
95.1
95.1
95.3
95.7
95.7
95.8
96.1
96.3
96.4
96.4
96.4
0.82
0.83
0.80
0.83
0.83
0.85
0.84
0.85
0.85
0.80
0.84
0.85
0.85
0.85
0.85
85
102
143
165
201
235
241
280
350
475
565
625
700
790
880
400 V 50 Hz
6.6
6.6
7.1
7.1
7.3
6.8
6.7
6.8
7.5
7.3
7.3
6.4
6.4
6.8
6.8
434
531
722
867
1060
1270
1273
1540
1923
2409
3035
3417
3850
4327
4813
High-output design
M2CA
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
315 LB
3GCA
3GCA
3GCA
3GCA
283 320-A
283 330-A
283 340-A
313 520-A
990
989
990
991
94.5
94.9
95.2
95.6
94.4
94.8
95.1
95.4
0.83
0.83
0.83
0.83
139
168
202
292
7.3
7.4
7.9
7.7
723
869
1061
1542
2.8
2.9
3.1
2.9
2.7
2.9
3.0
3.1
M2CA
315 LC
991
95.8
95.7
0.83
364
7.4
1927
2.8
2.9
400 V 50 Hz
Basic design
37
M2CA
280 SA
741
93.4
93.1
0.78
74
7.3
477
1.8
3.1
45
55
75
90
110
110
132
160
200
250
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 MB
355 LKD
400 MLA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
284 210-A
314 110-A
314 210-A
314 320-A
314 510-A
354 110-A
354 310-A
354 320-A
354 540-A
404 410-A
741
741
740
740
740
742
743
742
743
744
94.0
94.0
94.5
94.7
94.8
94.6
95.0
95.2
95.5
96.0
93.8
93.7
94.2
94.5
94.7
94.0
94.5
94.8
95.1
95.7
0.78
0.80
0.81
0.82
0.83
0.80
0.77
0.79
0.74
0.77
90
107
142
169
202
215
265
310
414
490
7.6
7.1
7.1
7.3
7.0
5.6
5.8
6.4
6.6
7.2
580
710
968
1161
1420
1415
1696
2059
2570
3209
1.9
1.8
1.8
1.9
1.9
1.4
1.5
1.8
1.8
1.6
3.2
2.8
2.8
2.8
2.7
2.2
2.3
2.5
2.7
2.9
M2CA
400 LKA
744
96.2
95.9
0.79
605
6.9
4043
1.5
2.8
315
2)
1)
1)
2)
M2CA
280 MB
400 V 50 Hz
3GCA 284 320-A
741
94.4
High-output design
94.2
0.79
108
7.8
709
1.9
3.2
The two bullets in the product code indicate choice of mounting arrangement, voltage and frequency (see ordering information page).
92
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Output kW
Motor type
Speed
r/min
Power Current
factor IN
EfEfciency cos
Speed ciency
%
100% A
r/min
%
380 V 50 Hz
45
55
75
90
110
132
132
160
200
250
315
355
400
450
500
988
988
991
990
990
991
988
991
992
990
990
991
991
992
991
1)
1)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
355 SA
315 LA
355 SB
355 MA
355 MB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
94.0
94.3
94.8
95.2
95.1
95.2
95.3
95.8
95.8
95.8
96.2
96.3
96.3
96.5
96.5
380 V 50 Hz
75
90
110
160
200
988
988
988
990
989
2)
2)
M2CA
M2CA
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
315 LB
315 LC
94.5
94.8
95.1
95.5
95.7
380 V 50 Hz
37
45
55
75
90
110
110
132
160
200
250
315
740
740
740
739
739
738
740
742
741
742
743
743
2)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 MB
355 LKD
400 MLA
400 LKA
93.2
93.8
93.9
94.3
94.6
94.7
94.5
94.8
95.1
95.5
96.0
96.1
380 V 50 Hz
55
740
M2CA
280 MB
94.2
Power
factor
cos
100%
Current
IN
A
415 V 50 Hz
0.83
0.84
0.82
0.84
0.84
0.86
0.84
0.86
0.86
0.82
0.85
0.86
0.86
0.86
0.86
89
106
146
173
212
245
252
295
370
485
590
650
730
825
920
991
991
993
992
992
993
991
993
993
992
992
993
992
993
993
94.2
94.4
94.9
95.3
95.3
95.3
95.5
95.9
95.9
95.9
96.2
96.4
96.4
96.5
96.5
Basic design
0.81
0.82
0.77
0.82
0.82
0.84
0.83
0.84
0.84
0.78
0.82
0.84
0.84
0.83
0.83
82
99
143
162
198
230
234
275
350
470
560
610
680
790
870
415 V 50 Hz
0.84
0.84
0.84
0.84
0.84
144
174
210
304
381
991
990
991
992
992
94.5
94.9
95.2
95.6
95.8
75
92
108
148
175
213
220
270
320
423
500
620
742
742
742
741
741
740
742
744
743
744
745
745
93.4
94.0
94.0
94.3
94.6
94.8
94.7
95.0
95.2
95.5
96.0
96.2
0.81
0.81
0.81
0.82
0.82
137
164
200
287
354
110
742
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
94.4
440
475
630
720
805
1200
910
1320
1550
1550
1900
2400
2400
2700
2700
66
66
72
72
75
75
75
75
75
75
82
82
82
82
82
2.6
3.1
4.1
7.3
9.2
545
815
835
1200
1380
67
67
67
80
80
Basic design
0.76
0.75
0.78
0.79
0.80
0.81
0.79
0.75
0.78
0.72
0.75
0.76
73
90
105
138
165
198
205
260
300
410
480
600
415 V 50 Hz
0.81
1.65
2
2.9
3.8
4.5
8.7
5.4
10
13
13
15
17
17
19
19
High-output design
415 V 50 Hz
0.80
0.80
0.82
0.82
0.83
0.84
0.80
0.78
0.80
0.76
0.79
0.80
Moment of
Sound
inertia
pressure
J = GD2 Weight level LP
kgm2
kg
dB(A)
1.85
2.2
2.9
3.8
4.5
5.4
8.7
10
13
15
17
19
460
500
630
715
800
900
1200
1350
1550
1900
2400
2700
65
65
70
70
77
77
75
75
75
80
80
80
High-output design
0.77
106
2.85
575
65
93
Motor type
Product code
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
280 MB
315 SMA
315 MB
315 LA
355 MA
355 LA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
280 MB
315 SMA
315 MB
315 LA
355 MA
355 LA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
Power
factor
cos
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
288 114-A
288 214-A
288 324-A
318 214-A
318 324-A
318 514-A
358 314-A
358 514-A
Efciency
%
Speed
r/min
Torque
1487/991
1486/991
1485/991
1489/992
1488/992
1488/991
1483/986
1487/988
93.5/88.0
93.9/89.3
94.2/89.8
95.2/91.2
95.5/92.2
95.7/92.6
95.0/91.2
95.7/92.0
113/40
144/54
161/58
199/67
219/75
260/88
300/100
435/155
7.7/7.4
7.6/7.7
7.4/7.7
6.6/6.5
6.6/6.4
6.6/6.4
5.3/5.0
7.7/5.9
400 V 50 Hz
288 119-A
288 219-A
288 329-A
318 219-A
318 329-A
318 519-A
358 319-A
358 519-A
1484/743
1486/743
1486/742
1487/744
1486/746
1486/743
1489/745
1490/745
93.2/90.0
93.8/91.5
94.1/91.8
94.6/92.5
94.9/93.0
95.2/93.4
95.3/93.7
95.5/94.0
Moment
of inertia
J=
Weight
GD2
kgm2
kg
385/178
495/241
579/270
706/308
802/356
963/424
1159/532
1670/821
2.3/2.9
2.4/3.2
2.3/3.2
1.9/2.8
1.9/2.9
1.9/3.0
1.1/1.3
1.7/1.6
3.0/2.6
2.9/2.7
2.7/2.8
2.6/2.9
2.4/2.8
2.4/2.7
2.3/2.2
3.2/2.4
1.15
1.4
1.7
2.3
2.9
3.5
6.5
7.8
445
490
550
730
850
970
1350
1550
121/38
150/50
164/56
197/56
235/65
283/80
340/90
435/120
400 V 50 Hz
7.5/5.3
8.5/5.4
8.8/5.4
6.8/4.9
6.8/4.8
7.0/4.8
6.8/4.8
7.5/5.1
418/193
514/257
578/296
706/282
848/334
1028/411
1282/512
1602/641
2.7/2.8
3.3/2.9
3.6/2.8
1.9/2.1
2.0/2.0
2.1/2.1
1.4/1.3
1.5/1.4
2.9/2.3
3.4/2.6
3.5/2.6
2.6/2.5
2.6/2.4
2.7/2.5
2.8/2.5
3.2/2.6
1.15
1.4
1.7
2.3
2.9
3.5
6.5
7.8
445
490
550
730
850
970
1350
1550
50/32
M2CA 280 SA
6.9/6.2 321/310
445
60/40
M2CA 280 SMA 3GCA 289 214-A 1486/987 92.6/91.8 0.85/0.78 111/82
7.1/6.6 386/387
490
70/47
M2CA 280 MB
8.0/7.4 450/454
550
90/60
110/75
132/90
160/110
180/120
230/150
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
5.9/5.8
6.8/5.6
6.7/6.0
7.2/5.8
7.2/7.3
7.7/6.9
1.5/2.6
1.9/2.7
1.9/3.1
2.1/2.8
1.4/2.0
1.5/2.0
730
850
970
1000
1350
1550
315 SMA
315 MB
315 LA
315 LB
355 MA
355 LA
319 214-A
319 324-A
319 514-A
319 524-A
359 314-A
359 514-A
1488/990
1490/989
1489/990
1491/990
1488/990
1489/990
94.3/93.5
94.9/93.9
95.1/94.1
95.3/94.5
95.0/94.3
95.3/94.5
400 V 50 Hz
0.86/0.77
0.86/0.79
0.85/0.76
0.85/0.79
0.89/0.80
0.89/0.82
161/121
195/147
238/181
287/213
305/230
395/280
577/579
705/724
847/868
1025/1061
1155/1157
1475/1447
2.3/2.4
2.6/2.3
2.7/2.7
2.7/2.3
3.1/3.1
3.2/2.9
2.3
2.9
3.5
3.9
6.5
7.8
50/32
65/40
85/50
M2CA 280 SA
3GCA 289 119-A 1486/743 92.7/91.8 0.88/0.70 89/72
7.2/6.9 321/411
M2CA 280 SMA 3GCA 289 219-A 1486/743 93.1/92.0 0.88/0.69 115/92 7.7/7.2 418/514
M2CA 280 MB 3GCA 289 329-A 1487/743 93.8/92.8 0.88/0.68 149/115 8.5/7.7 546/643
460
500
575
100/65
M2CA 315 SMA 3GCA 319 219-A 1487/742 94.2/93.8 0.89/0.74 174/137 6.5/6.3 642/836
755
120/75
M2CA 315 MB
845
150/95
M2CA 315 LA
950
1350
3GCA 359 519-A 1488/742 95.2/94.6 0.90/0.72 305/275 6.6/4.5 1155/1673 1.4/1.3 2.8/2.2 7.8
1550
The two bullets in the product code indicate choice of mounting arrangement, voltage and frequency (see ordering information page).
94
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Variant
1)
Motor size
280
315
355
400
Balancing
052
417
423
424
037
039
040
043
SPM-nipples.
058
060
107
420
796
142
178
209
425
Cooling system
044
045
068
Metal fan.
075
Coupling
035
Dimension drawing
141
Drain holes
065
066
Earthing bolt
067
1)
S = Included as standard
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
95
Code
Variant
1)
Motor size
280
315
355
400
Heating elements
Motor size
280
315
355-400
Element capacity:
50 W
65 W
2 x 65 W
450
451
Mounting arrangements
009
IM 2001 foot/ange mounted, IEC ange, from IM 1001 (B35 from B3).
Painting
114
179
Protection
005
072
073
158
403
095
135
138
161
070
410
011
122
123
125
Bimetal detectors, break type (NCC), (2x3 in series), 150C, in stator winding.
127
Bimetal detectors, break type (NCC), (3 in series, 130C & 3 in series, 150C),
in stator winding.
435
436
437
439
1)
96
S = Included as standard
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Code
Variant
1)
Motor size
280
315
355
400
440
441
442
446
446
Terminal box
015
017
019
136
137
157
187
413
414
418
468
469
Testing
145
146
Type test with report for motor from specic delivery batch.
147
Type test with report for motor from specic delivery batch, customer witnessed.
148
149
221
Type test and multi-point load test with report for motor from specic delivery batch. R
222
Torque/speed curve, type test and multi-point load test with report for motor from
specic delivery batch.
760
761
762
763
Y/D-starting
117
118
119
1)
S = Included as standard
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
97
Sizes 280-315
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061), IM B8 (IM 1071),
IM V5 (IM 1011), IM V6 (IM 1031) terminal box top mounted
Motor
size
280 SA
Poles A
Motor
size
280 SA
AA
AB
AC
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
545
545
545
545
545
545
545
545
622
622
622
622
622
622
622
622
622
622
555
555
555
555
555
555
555
555
624
624
624
624
624
624
624
624
624
624
368
368
368
368
419
419
419
419
406
406
406
406
457
457
508
508
508
508
419
419
457
457
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
501
450
501
501
501
501
501
501
539
539
539
539
539
539
592
592
592
592
190
190
190
190
190
190
190
190
216
216
216
216
216
216
216
216
216
216
372
302
372
372
381
381
381
381
343
343
443
343
392
392
411
411
411
411
321
321
392
292
65
75
65
75
65
75
65
75
65
80
65
80
65
80
65
90
65
90
60
65
60
65
60
65
60
65
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
Poles F
FA
GA
GB
GC GD
GF
HA
HC
HD
LC
LD
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4
6
18
18
18
18
18
18
18
18
18
18
18
20
18
20
18
20
18
20
18
20
18
20
20
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
58
81
81
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
69
95
95
53
58
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
67.5
64
69
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
79.5
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
11
12
12
280
280
280
280
280
280
280
280
280
280
315
315
315
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
555
558
558
558
627
627
627
627
627
627
627
627
627
627
627
627
627
730
730
730
730
730
730
730
730
730
730
820
820
820
820
820
820
820
820
820
820
848
848
820
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
28
28
28
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1545
1575
1575
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1695
1725
1695
1725
1725
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
390
420
420
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
115
115
115
1)
2
4-8
280 SMA
2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
315 SA
2
4-8
315 SMA
2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB
315 LC
1)
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
98
457
457
457
457
457
457
457
457
508
508
508
508
508
508
508
508
508
508
18
20
18
20
18
20
18
20
18
20
18
22
18
22
18
22
18
25
18
25
18
25
25
1)
H ISO 0, -1.0
2)
3)
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
11
14
14
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Sizes 280-315
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061), IM B8 (IM 1071),
IM V5 (IM 1011), IM V6 (IM 1031) terminal box side mounted
Motor
size
280 SA
Poles
AA
AB
AD
BA
BB
CA
CA
DA DB
DC
EA
EG
EH
2
4-8
280 SMA
2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
315 SA
2
4-8
315 SMA
2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
457
457
457
457
457
457
457
457
508
508
508
508
508
508
508
508
508
508
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
545
545
545
545
545
545
545
545
622
622
622
622
622
622
622
622
622
622
448
448
448
448
448
448
448
448
502
502
502
502
502
502
502
502
502
502
368
368
368
368
419
419
419
419
406
406
406
406
457
457
508
508
508
508
419
419
457
457
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
501
450
501
501
501
501
501
501
539
539
539
539
539
539
592
592
592
592
190
190
190
190
190
190
190
190
216
216
216
216
216
216
216
216
216
216
372
302
372
372
381
381
381
381
343
343
443
343
392
392
411
411
411
411
321
321
392
292
65
75
65
75
65
75
65
75
65
80
65
80
65
80
65
90
65
90
60
65
60
65
60
65
60
65
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
Motor
size
280 SA
Poles
FA
GA
GB
GC GD
GF
HA
HC
HD
LC
LD
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
18
20
18
20
18
20
18
20
18
20
18
22
18
22
18
22
18
25
18
25
18
18
18
18
18
18
18
18
18
18
18
20
18
20
18
20
18
20
18
20
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
53
58
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
64
69
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
280
280
280
280
280
280
280
280
280
280
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
558
558
558
558
627
627
627
627
627
627
627
627
627
627
620
620
620
620
620
620
620
620
620
620
685
685
685
685
685
685
685
685
685
685
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1695
1575
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB,LC
1)
1)
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
1)
H ISO 0, -1.0
2)
3)
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
Sizes 355-400
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061), IM B8 (IM 1071),
IM V5 (IM 1011), IM V6 (IM 1031) terminal box top mounted
3)
Motor
size
Poles A
1)
355 SA,SB 2
4-8
355 MA
2
4-8
355 MB
2
4-8
355 LA
2
4-8
355 LB
2
4-8
355 LKD
4-8
400 MLA
2
4-8
400 MLB
2
4-8
400 LKA
2
4-8
400 LKB
2
4-8
Motor
size
Poles F
1)
355 SA,SB 2
4-8
355 MA
2
4-8
355 MB
2
4-8
355 LA
2
4-8
355 LB
2
4-8
355 LKD
4-8
400 MLA
2
4-8
400 MLB
2
4-8
400 LKA
2
4-8
400 LKB
2
4-8
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
100
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
AA
AB
AC
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
720
720
720
720
720
720
720
720
720
720
720
810
810
810
810
810
810
810
810
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
714
714
714
714
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
416
416
416
416
416
416
426
426
426
426
583
583
583
583
583
643
643
643
643
503
503
503
503
503
553
553
553
553
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
FA
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
920
920
920
920
920
920
920
920
920
920
920
1003
1003
1003
1003
1003
1003
1003
1003
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1310
1380
1370
1440
1370
1440
1450
1520
1450
1520
1660
1616
1686
1616
1686
1786
1826
1786
1826
1460
1560
1520
1620
1520
1620
1600
1700
1600
1700
1847
1773
1873
1773
1873
1943
2013
1943
2013
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
1)
H ISO 0, -1.0
2)
3)
2)
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Sizes 355-400
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061), IM B8 (IM 1071),
IM V5 (IM 1011), IM V6 (IM 1031) terminal box side mounted
Motor
size
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
Motor
size
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
Poles A
AA
AB
AD
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
570
570
570
570
570
570
570
570
570
570
570
603
603
603
603
603
603
603
603
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
714
714
714
714
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
416
416
416
416
416
416
426
426
426
426
583
583
583
583
583
643
643
643
643
503
503
503
503
503
553
553
553
553
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
Poles F
FA
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
768
768
768
768
768
768
768
768
768
768
768
900
900
900
900
900
900
900
900
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1310
1380
1370
1440
1370
1440
1450
1520
1450
1520
1660
1616
1686
1616
1686
1786
1826
1786
1826
1460
1560
1520
1620
1520
1620
1600
1700
1600
1700
1847
1773
1873
1773
1873
1943
2013
1943
2013
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
1)
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
1)
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
1)
H ISO 0, -1.0
2)
3)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
2)
Sizes 280-315
Dimension drawings
Flange-mounted; IM B5 (IM 3001), V1 (IM 3011), V3 (IM 3031) and IM B14 (IM 3601),
V18 (IM 3611), V19 (IM 3631)
Motor
size
Poles
AC
DA
DB
DC
EA
EG
EH
FA
GA
GB
GC
280 SA
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
555
555
555
555
555
555
555
555
624
624
624
624
624
624
624
624
624
624
65
75
65
75
65
75
65
75
65
80
65
80
65
80
65
90
65
90
60
65
60
65
60
65
60
65
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
18
20
18
20
18
20
18
20
18
22
18
22
18
22
18
25
18
25
18
18
18
18
18
18
18
18
18
20
18
20
18
20
18
20
18
20
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
Motor
size
Poles
GD
GF
HB
LA
LB
LC
LD
280 SA
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
11
14
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
11
12
450
450
450
450
450
450
450
450
450
450
505
505
505
505
505
505
505
505
505
505
505
526
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1545
1575
22
22
22
22
22
22
22
22
22
22
25
25
25
25
25
25
25
25
25
25
25
25
920
850
920
920
980
980
980
980
980
980
955
955
1055
955
1055
1055
1125
1125
1125
1405
1125
1405
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1415
1725
1415
1725
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
390
420
500
500
500
500
500
500
500
500
500
500
600
600
600
600
600
600
600
600
600
600
600
600
450
450
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
550
550
550
550
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
115
115
550
550
550
550
550
550
550
550
550
550
660
660
660
660
660
660
660
660
660
660
660
660
18
18
18
18
18
18
18
18
18
18
23
23
23
23
23
23
23
23
23
23
23
23
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
280 SMA
280 MB
280 MC,MD
315 SA
315 SMA
315 MB
315 LA
315 LB,LC
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB
315 LC
1)
1)
Tolerances:
D,DA
ISO m6
F, FA
ISO h9
N
ISO j6
102
1)
2)
3)
2)
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Sizes 355-400
Dimension drawings
Flange-mounted; IM B5 (IM 3001), V1 (IM 3011), V3 (IM 3031) and IM B14 (IM 3601),
V18 (IM 3611), V19 (IM 3631)
Motor
size
Poles
AC
DA
DB
DC
EA
EG
EH
FA
GA
GB
GC
355 SA,SB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
720
720
720
720
720
720
720
720
720
720
720
810
810
810
810
810
810
810
810
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
81
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
Motor
size
Poles
GD
GF
HB
LA
LB
LC
LD
355 SA,SB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
565
565
565
565
565
565
565
565
565
565
565
603
603
603
603
603
603
603
603
1310
1380
1370
1440
1370
1440
1450
1520
1450
1520
1660
1616
1686
1616
1686
1786
1826
1786
1826
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
1170
1170
1230
1230
1230
1230
1310
1310
1310
1310
1450
1476
1476
1476
1476
1616
1616
1616
1616
1460
1560
1520
1620
1520
1620
1600
1700
1600
1700
1847
1773
1873
1773
1873
1943
2013
1943
2013
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
1)
1)
Tolerances:
D,DA
ISO m6
F, FA
ISO h9
N
ISO j6
1)
2)
3)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
2)
Sizes 280-315
Dimension drawings
Foot- and ange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box top mounted
Motor
size
Poles A
AA
AB
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
FA
1)
280 SA
2
4-8
280 SMA 2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
457
457
457
457
457
457
457
457
80
80
80
80
80
80
80
80
545
545
545
545
545
545
545
545
368
368
368
368
419
419
419
419
419
419
100
100
100
100
100
100
100
100
501
501
501
501
501
501
501
501
190
190
190
190
190
190
190
190
372
302
372
372
381
381
381
381
321
321
65
75
65
75
65
75
65
75
60
65
60
65
60
65
60
65
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
18
20
18
20
18
20
18
20
18
18
18
18
18
18
18
18
315 SA
508
508
508
508
508
508
508
508
508
508
100
100
100
100
100
100
100
100
100
100
622
622
622
622
622
622
622
622
622
622
406
406
406
406
457
457
508
508
508
508
457
457
100
100
100
100
100
100
100
100
100
100
539
539
539
539
539
539
592
592
592
592
216
216
216
216
216
216
216
216
216
216
343
343
443
343
392
392
411
411
411
411
392
292
65
80
65
80
65
80
65
90
65
90
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
18
22
18
22
18
22
18
25
18
25
18
20
18
20
18
20
18
20
18
20
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
550
550
550
550
550
550
550
550
550
550
660
660
660
660
660
660
660
660
660
660
660
660
660
18
18
18
18
18
18
18
18
18
18
23
23
23
23
23
23
23
23
23
23
23
23
23
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
2
4-8
315 SMA 2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
Motor
size
280 SA
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB
315 LC
Poles G
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4
6
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
104
2)
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
58
81
81
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
69
95
95
53
58
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
67.5
64
69
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
79.5
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
11
14
14
1)
H ISO 0, -1.0
N ISO j6
2)
3)
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
11
12
12
280
280
280
280
280
280
280
280
280
280
315
315
315
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
558
558
558
558
627
627
627
627
627
627
627
627
627
627
627
627
627
730
730
730
730
730
730
730
730
730
730
820
820
820
820
820
820
820
820
820
820
848
848
820
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
28
28
28
1060
990
1060
1060
1120
1120
1255
1225
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1545
1575
1575
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1695
1725
1695
1725
1725
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
390
420
420
500
500
500
500
500
500
500
500
500
500
600
600
600
600
600
600
600
600
600
600
600
600
600
450
450
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
550
550
550
550
550
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
115
115
115
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Sizes 280-315
Dimension drawings
Foot- and ange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box side mounted
Motor
size
Poles A
AA
AB
AD
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
FA
1)
280 SA
2
4-8
280 SMA 2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
457
457
457
457
457
457
457
457
80
80
80
80
80
80
80
80
545
545
545
545
545
545
545
545
448
448
448
448
448
448
448
448
368
368
368
368
419
419
419
419
419
419
100
100
100
100
100
100
100
100
501
501
501
501
501
501
501
501
190
190
190
190
190
190
190
190
372
302
372
372
381
381
381
381
321
321
65
75
65
75
65
75
65
75
60
65
60
65
60
65
60
65
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
18
20
18
20
18
20
18
20
18
18
18
18
18
18
18
18
315 SA
508
508
508
508
508
508
508
508
508
508
100
100
100
100
100
100
100
100
100
100
622
622
622
622
622
622
622
622
622
622
502
502
502
502
502
502
502
502
502
502
406
406
406
406
457
457
508
508
508
508
457
457
100
100
100
100
100
100
100
100
100
100
539
539
539
539
539
539
592
592
592
592
216
216
216
216
216
216
216
216
216
216
343
343
443
343
392
392
411
411
411
411
392
292
65
80
65
80
65
80
65
90
65
90
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
18
22
18
22
18
22
18
25
18
25
18
20
18
20
18
20
18
20
18
20
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
2
4-8
315 SMA 2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
Motor
size
280 SA
280 SMA
280 MB
280 MC
280 MD
Poles G
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
315 SA
2
4-8
315 SMA 2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
2)
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
53
58
53
58
53
58
53
58
53
58
64
69
64
69
64
69
64
69
64
69
11
12
11
12
11
12
11
12
11
12
11
11
11
11
11
11
11
11
11
11
280
280
280
280
280
280
280
280
280
280
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
558
558
558
558
620
620
620
620
620
620
620
620
620
620
24
24
24
24
24
24
24
24
24
24
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
385
385
385
385
385
385
385
385
385
385
500
500
500
500
500
500
500
500
500
500
450
450
450
450
450
450
450
450
450
450
100
100
100
100
100
100
100
100
100
100
550
550
550
550
550
550
550
550
550
550
18
18
18
18
18
18
18
18
18
18
5
5
5
5
5
5
5
5
5
5
58
71
58
71
58
71
58
81
58
81
69
85
69
85
69
85
69
95
69
95
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
11
14
11
14
11
14
11
14
11
14
11
12
11
12
11
12
11
12
11
12
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
627
627
627
627
627
627
627
627
627
627
685
685
685
685
685
685
685
685
685
685
28
28
28
28
28
28
28
28
28
28
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1245
1275
1345
1275
1345
1375
1415
1445
1695
1725
390
420
390
420
390
420
390
420
390
420
600
600
600
600
600
600
600
600
600
600
550
550
550
550
550
550
550
550
550
550
115
115
115
115
115
115
115
115
115
115
660
660
660
660
660
660
660
660
660
660
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
1)
H ISO 0, -1.0
N ISO j6
2)
3)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
Sizes 355-400
Dimension drawings
Foot- and ange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box top mounted
Motor
size
Poles A
1)
355 SA,SB 2
4-8
355 MA
2
4-8
355 MB
2
4-8
355 LA
2
4-8
355 LB
2
4-8
355 LKD 4-8
400 MLA 2
4-8
400 MLB 2
4-8
400 LKA 2
4-8
400 LKB 2
4-8
Motor
size
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
Poles G
1)
355 SA,SB 2
4-8
355 MA
2
4-8
355 MB
2
4-8
355 LA
2
4-8
355 LB
2
4-8
355 LKD 4-8
400 MLA 2
4-8
400 MLB 2
4-8
400 LKA 2
4-8
400 LKB 2
4-8
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
106
AA
AB
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
FA
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
714
714
714
714
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
426
426
426
426
426
426
436
436
436
436
583
583
583
583
583
643
643
643
643
503
503
503
503
503
553
553
553
553
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
920
920
920
920
920
920
920
920
920
920
920
1003
1003
1003
1003
1003
1003
1003
1003
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1310
1380
1370
1440
1370
1440
1450
1520
1450
1520
1660
1616
1686
1616
1686
1786
1826
1786
1826
1460
1560
1520
1620
1520
1620
1600
1700
1600
1700
1847
1773
1873
1773
1873
1943
2013
1943
2013
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1)
H ISO 0, -1.0
N ISO j6
2)
3)
2)
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Sizes 355-400
Dimension drawings
Foot- and ange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box side mounted
Motor
size
Poles A
1)
355 SA,SB 2
4-8
355 MA
2
4-8
355 MB
2
4-8
355 LA
2
4-8
355 LB
2
4-8
355 LKD 4-8
400 MLA 2
4-8
400 MLB 2
4-8
400 LKA 2
4-8
400 LKB 2
4-8
Motor
size
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
Poles G
1)
355 SA,SB 2
4-8
355 MA
2
4-8
355 MB
2
4-8
355 LA
2
4-8
355 LB
2
4-8
355 LKD 4-8
400 MLA 2
4-8
400 MLB 2
4-8
400 LKA 2
4-8
400 LKB 2
4-8
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
AA
AB
AD
BA
BB
CA
CA D
DA
DB
DC
EA
EG
EH
FA
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
570
570
570
570
570
570
570
570
570
570
570
603
603
603
603
603
603
603
603
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
765
765
765
765
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
416
416
416
416
416
416
426
426
426
426
583
583
583
583
583
643
643
643
643
503
503
503
503
503
553
553
553
553
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
768
768
768
768
768
768
768
768
768
768
768
900
900
900
900
900
900
900
900
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1310
1380
1370
1440
1370
1440
1450
1520
1450
1520
1660
1616
1686
1616
1686
1786
1826
1786
1826
1460
1560
1520
1620
1520
1620
1600
1700
1600
1700
1847
1773
1873
1773
1873
1943
2013
1943
2013
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1)
H ISO 0, -1.0
N ISO j6
2)
3)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
2)
Sizes 280-400
Dimension drawings
Terminal box in standard design with 6 terminals
Side-mounted terminal box:
122/4
142/4
122/5
142/6
162/7, 162/10
3
Terminal box type
Motor size
A1
B1
H1
280
455
280
177
142/4
315 - 400M
536
349
197
162/4 + adapter
355 - 400
787
410
226
280
383
280
180
142/6
315 - 400M
426
347
201
162/7
355 - 400
508
412
226
Rating plate
The rating plate is in table form giving values for
speed, current and power factor for six voltages.
108
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
Accessories
Slide rails for motor sizes 280-400
Type
Motor
size
M2
M3
Wmax
ZHKJ 50
ZHKJ 63
ZHKJ 71 1)
ZHKJ 71 1)
280
315
355
400
28
28
33
33
25
25
30
30
20
20
20
20
135
220
275
180
850
1040
1260
1260
1)
X1
X2
max
X3
min
X5
X6
Y1
Y2
Y3
Weight/
rail
kg
150
150
190
190
125
125
145
140
135
150
185
200
200
200
240
240
900
1090
1320
1320
50
50
60
60
100
100
140
140
80
80
120
120
50
50
50
50
14.5
17.5
31
31
Each set includes two complete slide rails including screw for mounting the motor on the rails.
Screws for mounting the rails on the foundation are not included. Slide rails are supplied with
unmachined lower surfaces and should, prior to tightenng down, be supported in a suitable manner.
Depth
Depth
ZBYH 161...241
ZBHE 301
Foundation
stud type
Fixing screw
Motor
size
Main dimensions
A1
B1
C1
D1
E1
Weight
kg
ZBYH 201
ZBYH 241
ZBHE 301
M20 x 70/70 Y
M24 x 90/90 Y
M30 x 100/100 Y
280
315, 355
400
100
130
300
95
135
385
M20
M24
M30
35
45
65
3.4
7
30
100
130
200
Each set of foundation studs includes 4 studs, xing screw for the motor, adjusting
screw with foundation plate.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
109
Accessories
Protective roof (variant code 005)
Motor size
Poles
280 S_
2
4-12
2
4-12
2
4-12
555
555
555
555
555
555
1160
1090
1160
1160
1220
1220
2
4-12
2
4-12
2
4-12
2
4-12
624
624
624
624
624
624
624
624
1210
1240
1310
1240
1310
1340
1380
1410
2
4-12
2
4-12
2
4-12
4-12
720
720
720
720
720
720
720
1440
1510
1500
1570
1580
1650
1790
2
4-12
2
4-12
810
810
810
810
1796
1836
1936
1976
280 SM_
280 M_
315 S_
315 SM_
315 M_
315 L_
355 S_
355 M_
355 L_
355 LK_
400 ML_
400 LK_
Mounting arrangement IM V1
with protective roof
1)
1)
110
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
280
315
355
400
Stator
Material
Paint colour shade
Paint thickness
Material
Paint colour shade
Paint thickness
Bearings
D-end
2-pole
4-12 poles
6316/C4
6316/C3
6316/C4
6319/C3
6316M/C4
6322/C3
6317M/C4
6322/C3
N-end
2-pole
4-12 poles
6316/C4
6316/C3
6316/C4
6316/C3
6316M/C4
6319/C3
6317M/C4
6319/C3
Axially-locked bearings
Bearing seal
Lubrication
SPM-nipples
On request
Rating plate
Terminal box
Frame material
Cover material
Cover screw material
Connections
Cable
entries
2 x M63
2 x M63
2-4 pole
6-8 pole
2 x M63
2 x M63
2 x 60/80
2 x 60
3
2 x 80
2 x 60/80
Terminals
Fan
Material
Fan cover
Material
Paint colour shade
Paint thickness
Sheet steel
Blue, Munsell 8B 4.5/3.25 (NCS 4822-B05G) / RAL 5014
Two-pack epoxy polyester paint, thickness 80 m
Stator winding
Material
Insulation
Copper
Insulation class F; temperature rise class B unless otherwise stated.
Winding protection
Material
Rotor winding
Balancing method
Key ways
Heating elements
On request
50 W
1 x 65 W
Drain holes
Enclosure
Cooling method
IC 411
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel GB 12-2004
2 x 65 W
2 x 65 W
111
112
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel GB 12-2004
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
113
Mechanical design
Stator
The motor frame including feet, bearing housing and
terminal box is made of cast iron. Integrally cast feet
allow a very rigid mounting and minimal vibration.
Drain holes
Motors, frame sizes 280 to 355, are tted with drain holes and closable plugs. The plugs are open on delivery.
When mounting the motors, ensure that the drain holes
face downwards.
4
Terminal boxes
Terminal boxes are mounted on top of the motor as standard. The terminal box can also be mounted on the left
or right side, see ordering information.
114
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
The table below shows the different alternatives available for cable boxes and cable entries. Other types on
request.
Poles
Cable entry
mm
71M
2,4,6
2xM161.5
160M
80M
2,4,6
2xM251.5
160L
2,4,6,8
2xM401.5
90S
2,4,6
2xM251.5
180M
2,4,6,8
2xM401.5
90L
2,4,6
2xM251.5
180L
2,4,6,8
2xM401.5
100L
2,4,6,8
2xM321.5
200L
2,4,6,8
2xM501.5
112M
2,4,6,8
2xM321.5
225S
4,6,8
2xM501.5
132S
2,4,6,8
2xM321.5
225M
2,4,6,8
2xM501.5
132M
2,4,6,8
2xM321.5
250M
2,4,6,8
2xM631.5
Motor
size
Poles
Cable entry
mm
2,4,6,8
2xM401.5
Cast iron motor sizes 280 to 355 with top-mounted terminal box
Motor
size
Terminal
box
Flange
opening
Flange
Cable gland
Cable
entry
Cable
diameter
Auxiliary
entries
Terminal
bolt
C
D
E-D
2 x M63
2 x M63
2 x M63
2 x 32-49
3 x 32-49
3 x 32-49
2 x M20
2 x M20
2 x M20
M8
M10
M12
122/2
142/1
162/1
122/2
2 x M63
2 x 32-49
2 x M20
M8
142/1
162/1
D
E-D
2 x M63
2 x M63
3 x 32-49
3 x 32-49
2 x M20
2 x M20
M10
M12
122/2
2 x M63
2 x 32-49
2 x M20
M8
142/1
142/2
D
D
2 x M63
2 x M63
3 x 32-49
3 x 32-49
2 x M20
2 x M20
M10
M10
C
D
D
2 x M63
2 x M63
2 x M63
2 x 32-49
3 x 32-49
3 x 32-49
2 x M20
2 x M20
2 x M20
M8
M10
M10
122/2
142/1
142/2
Terminal box
Flange
3GZF294730-749 (280)
3GZF293703-753 (315-355)
Terminal box
Cable gland
3GZF294730-613
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Adapter E-D
3GZF294730-944
Flange
3GZF293703-753
(315-355)
Cable gland
3GZF294730-613
115
Terminal box
on top
on side
Opening
type
(D/Y-conn.)
Max. rated
current A
mm2
Max connection
cable area
Cable gland
diameter
Auxliary cable
entries
Cable box
diameter
Blank plate
280
315
355
122/2
142/1
142/2
162/1
C
D
D
E-D
363/210
640/370
640/370
950/550
2 x 150
2 x 240
2 x 240
4 x 240
2 x M40-63
1 x M40-63
2 x M40-63
2 x M20
2 x M20
2 x M20
max 2x60
max 2x60
max 2x80
max 4x60
MKLN 20
MKLN 30
NA
NA
Flange
Opening
C
D
E
E-D
Adapter 3GZF
294730-944
62
100
100
100
193
300
300
300
62
80
80
80
193
292
292
292
M8
M10
M10
M10
Bearings
The motors are normally tted with single-row deep
groove ball bearings as listed in the table below.
Number
of poles
Motor
size
Number
of poles
71M
2-6
6202 VV C3
6202 VV C3
180M
2-8
6310 DDU C3
6210 DDU C3
80M
2-6
6204 DDU C3
6204 DDU C3
180L
2-8
6310 DDU C3
6210 DDU C3
90S
2-6
6205 DDU C3
6205 DDU C3
200L
2-8
6312 DDU C3
6212 DDU C3
90L
2-6
6205 DDU C3
6205 DDU C3
225S
4-8
6313 ZZ C3
6213 ZZ C3
100L
2-8
6206 DDU C3
6206 DDU C3
225M
2-8
6313 ZZ C3
6213 ZZ C3
112M
2-8
6207 DDU C3
6206 DDU C3
250M
2-8
6314/C3
6214/C3
132S
2-8
6208 DDU C3
6207 DDU C3
280
6316/C4
6316/C4
132M
2-8
6208 DDU C3
6207 DDU C3
4-12
6316/C3
6316/C3
160M
2-8
6309 DDU C3
6209 DDU C3
6316/C4
6316/C4
160L
2-8
6309 DDU C3
6209 DDU C3
4-12
6319/C3
6316/C3
6316/C3
6316/C3
4-12
6322/C3
6319/C3
315
355
Axially-locked bearings
The D-end bearing is locked, in sizes 71 to 180 with
the spring ring and in sizes 200 to 355 with the inner
bearing cover. The inner ring is locked by tight tolerance
to the shaft.
116
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Transport locking
Motors that have roller bearings or an angular contact
ball bearing are tted with a transport lock before despatch to prevent damage to the bearings during transport. In case of transport locked bearing, motor sizes
280 to 355 are provided with a warning sign.
Bearing seals
The motors are as standard provided with seals according to table below.
Standard design
Motor
size
Description
D-end
71 to 132
160 to 225
250
280
VS 80
VS 80
315
355
1)
Axial seal
N-end
Alternative design
Number
of poles
d1
d2
B1
VS 80
VS 80
80x100x101)
80x100x10
2
4-12
80
80
100
100
13.5
13.5
10
10
VS 80
VS 95
VS 80
VS 80
80x100x101)
95x120x12
2
4-12
80
95
100
120
13.5
13.5
10
12
VS 80
VS 110
VS 80
VS 95
80x100x101)
110x140x121)
2
4-12
80
110
100
140
13.5
15.5
10
12
Viton-seal
Bearing life
The nominal life L10 of a bearing is dened according
to ISO as the number of operating hours achieved or
exceeded by 90% of identical bearings in a large test
series under certain specied conditions. 50% of the
bearings achieve at least ve times this gure.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
117
Lubrication
On delivery, the motors are lubricated with a type of
grease intended for use in dry or humid environments,
at normal ambient temperature.
Motors 250 to 355 have grease value lubrication for lubrication in service. The lubrication intervals and quantity
are stated in the maintenance manual which comes with
the motor.
Pulley diameter
When the desired bearing life has been determined, the
minimum permissible pulley diameter can be calculated
with FR (or FRX), according to the formula:
D=
1.9 107 K P
N FR
Where:
D
= diameter of pulley, mm
P
= power requirement, kW
N
= motor speed, r /min
K
= belt tension factor, dependent on belt type and
type of duty. A common value for V belts is K=
2.5
FR = permissible radial force
Motor
Length of
shaft
extension
Radial forces
Ball bearings
20,000 hours
40,000
size
Poles
E (mm)
X0 (N)
FXmax (N)
X0 (N)
Xmax (N)
71 M
2
4
6
2
4
6
8
2
4
6
8
30
30
30
40
40
40
40
40
40
40
40
381
480
555
624
788
907
997
686
870
1000
1095
322
405
469
509
643
740
813
542
687
790
866
303
381
441
495
626
720
791
545
690
794
870
256
322
372
404
511
587
646
430
545
627
687
80 M
90 S
118
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Length of
shaft
extension
Radial forces
Ball bearings
20,000 hours
size
Poles
E (mm)
X0 (N)
90 L
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
4
6
8
2
4
6
8
2
4
6
8
2
4
4
6
8
2
4
6
8
4
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
50
50
50
50
60
60
60
60
60
60
60
60
80
80
80
80
80
80
80
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
140
140
110
110
110
110
140
140
140
140
140
140
140
140
140
170
170
170
140
140
140
140
140
210
210
210
696
885
1015
1112
979
1234
1419
1566
1258
1592
1831
2020
1435
1821
2079
2299
1840
2107
2329
1544
1948
2232
2465
1563
1971
2259
2495
2984
3759
3802
4352
4800
4090
5162
5909
6518
5763
7261
4591
5791
6644
7296
5112
6440
7388
8113
7300
9200
10600
11600
7300
11300
13000
14300
7300
11300
13000
14300
7400
15200
17300
19000
100 L
112 M
132 S
132 M
160 M
160L
180M
180L
200L
225S
225M
250M
280SM_
315SM_
315ML
355 S_
40,000
FXmax (N)
564
717
823
901
785
989
1137
1255
1014
1284
1477
1629
1122
1423
1625
1797
1476
1690
1869
1200
1513
1734
1916
1243
1568
1797
1984
2371
2988
3073
3518
3881
3377
4262
4879
5382
4526
5703
3811
4594
5271
5788
4170
5254
6027
6619
6200
7800
8900
9800
6000
9400
10600
10400
6000
9400
10600
10400
6400
12500
14200
15600
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
X0 (N)
553
702
806
883
777
979
1126
1243
998
1264
1453
1603
1139
1445
1650
1825
1461
1672
1849
1226
1546
1772
1957
1240
1565
1793
1980
2368
2984
3017
3454
3810
3246
4097
4690
5173
4574
5763
3644
4596
5273
5791
4057
5111
5864
6439
5800
7300
8400
9200
5800
9000
10300
11300
5800
9000
10300
11300
5100
12000
13700
15200
Xmax (N)
448
569
653
715
622
785
903
996
805
1019
1172
1293
890
1130
1290
1427
1172
1341
1483
952
1201
1377
1520
987
1244
1426
1575
1882
2371
2439
2792
3080
2680
3383
3872
4272
4593
4526
3025
3646
4184
4594
3310
4170
4784
5253
4900
6200
7100
7800
4950
7500
8500
9400
4950
7500
8500
9400
5800
9850
11300
12400
119
FFAZ
AZ
Motor
size
20,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
FAZ
N
N
6-pole
FAD
FAZ
N
N
71
80
90
270
430
470
270
430
470
360
590
650
360
590
650
440
710
780
100
112
132 S_
132 M_
650
840
950
-
650
840
950
-
880
880
1160 1160
1300 1300
1300 1300
160
180M
180L
200
225S
225M
250
1020
1970
2570
2870
3220
1020
1970
2570
2870
3220
1380
2660
2660
3490
3900
3900
4380
280
315
355
7300 5300
7000 5000
8000 4000
1380
2660
2660
3490
3900
3900
4380
8000 6000
9000 7000
13500 6500
40,000 hours
2-pole
4-pole
FAD
FAZ
FAD
FAZ
N
N
N
N
8-pole
FAD
N
FAZ
N
440
710
780
800
870
800
870
200
320
350
200
320
350
270
440
470
270
440
470
1060
1380
1540
1540
1060
1380
1540
1540
1200
1570
1760
1760
1200
1570
1760
1760
480
620
690
-
480
620
690
-
650
850
960
950
650
850
960
950
1650
3200
4200
4720
5290
1650
3200
4200
4720
5290
1880
3620
4750
5310
5310
5960
1880
3620
4750
5310
5310
5960
740
1440
1890
2120
2380
740
1440
1890
2120
2380
1020
1970
1970
2580
2880
2880
3220
1020
1970
1970
2580
2880
2880
3220
9000 7000
10600 8600
15300 8300
10000 8000
11600 9600
16800 9800
5750 3750
5600 3600
6500 2500
6200 4200
6900 4900
10800 3800
6-pole
FAD
FAZ
N
N
320
530
580
320
530
580
8-pole
FAD
FAZ
N
N
600
650
600
650
780 780
1020 1020
1140 1140
1140 1140
890 890
1170 1170
1310 1310
1310 1310
1210
2350
3080
3460
3880
1390
2670
3500
3900
3900
4380
1210
2350
3080
3460
3880
1390
2670
3500
3900
3900
4380
6900 4900
7900 5900
12000 5000
7700 5700
8900 6900
13300 6300
6-pole
FAD
FAZ
N
N
8-pole
FAD
FAZ
N
N
FAZ
FAD
Mounting arrangement IM V1
Motor
size
20,000 hours
2-pole
4-pole
FAD
FAZ
FAD
FAZ
N
N
N
N
6-pole
FAD
FAZ
N
N
8-pole
FAD
FAZ
N
N
71
80
90
280
450
500
260
410
440
450
740
820
420
560
730
830
920
770
830
210
340
380
190
300
320
280
460
510
250
410
440
340
550
620
310
500
530
100
112
132 S_
132 M_
710
920
1050
-
590
770
830
-
950
800
1260 1050
1450 1160
1480 1120
1140 980
1490 1270
1690 1400
1730 1320
1280
1680
1930
1950
1110
1470
1600
1580
530
690
800
-
420
540
570
-
720
950
1100
1130
560
740
810
770
860
1130
1280
1320
700
910
990
910
160 M_
160 L_
180 M_
180 L_
200
225 S_
225 M_
250
1240
1320
2320
3050
3570
4090
750
710
1630
2050
2180
2360
1670
1730
3100
3170
4100
4680
4770
5570
1100
1030
2230
2150
2880
3130
3040
3180
1960
2050
3750
4830
5650
6520
1340
1250
2650
3510
3790
4070
2140
2260
4160
5450
6120
6250
7210
1560
1500
3100
4060
4500
4370
4700
970
1050
1780
2370
2810
3240
480
440
1100
1370
1420
1520
1300
1370
2400
2480
3180
3650
3740
4420
730
670
1540
1460
1970
2100
2020
2030
1530
1610
2900
3700
4390
5100
900
820
1800
2390
2530
2650
1650
1770
3200
4200
4720
4850
5630
1070
1010
2140
2800
3090
2960
3120
8500
9000
9600
10900
4300
3700
3400
2000
9500
11600
12400
18500
4600
5400
5000
3800
11000
13500
14800
21200
5500
6200
5600
5000
12200
14500
16200
23000
6600
7500
7000
6800
6950 2700
7450 2100
8100 1850
8500 500
7700
9450
10100
15700
2800
3200
2850
1000
8900
10900
12200
18000
3350
3650
3150
1750
9750
11900
13200
19400
4200
4650
4150
3100
280
315 SM_
315 ML_
355 S_
120
380
620
590
350
560
600
40,000 hours
2-pole
4-pole
FAD
FAZ
FAD
FAZ
N
N
N
N
620
690
560
600
970 800
1270 1060
1470 1140
1490 1120
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
D, E, F
5-6 7
8-10 11 12 13 14
M2QA 90S4A
4
IM B3 (IM 1001)
1.1 kW
3GQA092101-ADA
A Motor type
B Motor size
C Product code
D Mounting arrangement code
E Voltage and frequency code
F Generation code
G Variant codes
20
22
25
28
112
132
160
180
6
7
8
9
=
=
=
=
=
=
=
=
200
225
250
280
31 = 315
35 = 355
Position 12
Mounting arrangement
A = Foot-mounted, top-mounted terminal box
R = Foot-mounted, terminal box on RHS,
seen from D-end
L = Foot-mounted, terminal box on LHS,
seen from D-end
B = Flange-mounted, large ange
C = Flange-mounted, small ange sizes (71-112)
H = Foot- and ange-mounted
Position 13
Voltage and frequency code
See tables on appropriate page
12 poles
>12 poles
Two-speed motors
Multi-speed motors
Position 14
Generation code
A, B, C
The product code must be, if needed, followed by
variant codes.
Positions 8 to 10
Serial number
Position 11
- (dash)
Code letters for supplementing the product code for voltage and frequency:
A
380 VY 50 Hz
380 V 50 Hz
380-420 V 50 Hz
660-690 VY 50 Hz
440-4801) V 60 Hz
500 V 50 Hz
575 V 60 Hz
500 VY 50 Hz
575 VY 60 Hz
220-240 V 50 Hz
380-420 VY 50 Hz
440-480 VY 60 Hz
660 V 50 Hz
690 V 50 Hz
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
H
415 V 50 Hz
1)
160 to 250
121
Output
kW
Motor type
Product code
Speed
r/min
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M2A
71 M2B
80 M2A
80 M2B
90 S2A
90 L2A
100 L2A
112 M2A
132 S2A
132 S2B
160 M2A
160 M2B
160 L2A
180 M2A
200 L2A
200 L2B
225 M2A
250 M2A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L2 A
132 M2A
132 M2B
160 L2B
180 L2A
200 L2C
225 M2B
250 M2B
280 SMC
Power
Current
Full
3/4
load
load
100% 75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
1.27
1.89
2.52
3.68
5.03
7.37
10.02
13.17
17.99
24.53
35.85
49.06
60
71
96
119
144
177
241
289
353
423
513
641
800
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.3
2.2
2.3
2.5
2.4
1.7
1.7
1.5
1.7
1.7
2.6
1.5
3.0
2.7
3.0
2.2
2.5
3.5
3.0
3.2
3.0
3.5
3.1
2.6
2.7
2.5
2.6
2.6
2.7
2.7
2.6
2.5
2.5
2.5
2.4
3.1
2.8
2.0
2.0
2.2
2.3
2.3
2.2
2.5
2.4
1.9
2.1
2.2
2.2
2.8
2.8
2.6
2.8
2.8
2.6
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
071 301-A
071 302-A
081 301-A
081 302-A
091 101-A
091 501-A
101 501-A
111 301-A
131 101-A
131 102-A
161 301-A
161 302-A
161 501-A
181 301-A
201 501-A
201 502-A
221 301-A
251 301-A
281 210-D
281 220-D
311 210-D
311 220-D
311 230-D
311 410-D
351 100-D
2780
2785
2840
2855
2850
2850
2860
2900
2920
2920
2930
2920
2930
2940
2955
2955
2970
2960
2974
2970
2979
2977
2976
2980
2983
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
111 501-A
131 301-B
131 302-B
161 502-A
181 501-A
201 503-A
221 302-A
251 302-A
281 230-D
2900
2910
2900
2930
2950
2955
2975
2970
2973
Efciency
70.0
73.0
75.0
78.0
79.0
81.5
83.0
85.0
87.5
88.5
90.0
90.0
90.5
90.8
91.4
92.2
92.6
93.4
94.1
94.5
94.1
94.7
95.1
95.7
95.7
Basic design
68.0
72.4
75.5
77.9
79.0
81.8
83.2
84.6
87.9
90.1
90.5
90.1
90.9
91.0
91.1
91.8
92.2
91.7
93.6
94.2
93.4
94.1
94.8
95.3
95.3
0.81
0.82
0.85
0.85
0.87
0.86
0.88
0.9
0.89
0.9
0.89
0.89
0.9
0.9
0.9
0.9
0.89
0.89
0.87
0.89
0.85
0.87
0.88
0.88
0.89
94.8
0.9
0.88
0.9
0.9
0.9
0.9
0.89
0.89
0.9
400 V 50 Hz
1)
2)
82.0
85.5
88.0
88.0
90.8
92.0
92.6
91.0
95.0
Torque
0.94
1.33
1.7
2.4
3.15
4.53
5.93
7.55
10.2
13.6
19.82
27.03
32.78
38.86
52
64
78
96
134
156
198
232
273
345
424
6.1
6.1
6.1
7.0
7.0
7.0
7.0
7.0
7.0
7.0
6.5
6.5
6.5
6.5
6.5
6.5
7.0
7.5
6.7
6.4
6.3
6.3
6.2
7.9
6.8
High-output design
10.76
17.65
20.05
40.09
53
78
96
134
187
7.0
7.5
8.0
6.5
6.5
7.0
7.0
7.0
6.7
18.1
30.2
36.2
71
97
145
177
241
353
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Output
kW
Motor type
Speed
r/min
Efciency
%
380 V 50 Hz
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2765
2780
2825
2840
2835
2835
2845
2885
2905
2905
2918
2917
2920
2940
2950
2950
2965
2956
2970
2966
2976
2974
2972
2978
2981
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M2A
71 M2B
80 M2A
80 M2B
90 S2A
90 L2A
100 L2A
112 M2A
132 S2A
132 S2B
160 M2A
160 M2B
160 L2A
180 M2A
200 L2A
200 L2B
225 M2A
250 M2A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L2 A
132 M2A
132 M2B
160 L2B
180 L2A
200 L2C
225 M2B
250 M2B
280 SMC
70.0
73.0
75.5
77.5
79.0
81.5
83.0
85.0
87.5
87.5
90.0
90.0
90.5
90.8
91.2
91.7
92.2
93.2
94.0
94.2
94.1
94.5
95.0
95.6
95.7
Power
factor
cos
Current
IN
Speed
A
r/min
94.8
1)
2)
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.83
0.84
0.86
0.86
0.9
0.89
0.9
0.92
0.9
0.9
0.91
0.91
0.91
0.91
0.91
0.91
0.90
0.90
0.88
0.89
0.86
0.87
0.88
0.89
0.90
0.97
1.37
1.75
2.52
3.23
4.61
6.14
7.82
10.7
14.5
20.41
27.82
34.13
40.45
54
67
82
100
137
163
208
243
290
358
440
380 V 50 Hz
2968
Efciency
%
0.90
198
2795
2800
2855
2870
2865
2865
2875
2915
2935
2935
2930
2932
2935
2955
2960
2960
2975
2962
2976
2974
2980
2979
2978
2982
2984
70.0
73.0
75.0
78.0
79.0
81.0
83.5
85.0
88.0
89.0
90.0
90.0
90.5
90.8
91.3
92.3
92.6
93.5
94.2
94.6
94.1
94.7
95.2
95.7
95.7
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.79
0.79
0.85
0.83
0.86
0.83
0.86
0.87
0.88
0.9
0.87
0.88
0.89
0.88
0.89
0.89
0.87
0.88
0.86
0.88
0.83
0.85
0.88
0.87
0.88
0.93
1.33
1.64
2.37
3.08
4.56
5.85
7.53
9.94
13.1
19.54
26.35
31.95
38.3
51
62
77
93
130
151
197
230
265
335
412
0.0003
0.00037
0.00091
0.00107
0.00135
0.00163
0.00402
0.00671
0.01241
0.01491
0.0436
0.0551
0.06549
0.08805
0.14821
0.16822
0.29345
0.3784
0.7
0.82
1.05
1.25
1.5
1.95
2.7
10
11
16
17
21
24
33
42
58
63
112
122
142
170
235
254
328
390
570
610
820
870
960
1130
1500
56
56
57
58
61
61
65
67
70
70
72
72
72
72
81
81
81
84
78
78
83
83
83
83
83
415 V 50 Hz
High-output design
2975
0.008263
0.014995
0.01768
0.06549
0.10339
0.18473
0.33431
0.45829
1.05
95.1
0.89
180
49
68
73
130
185
276
340
411
660
70
71
73
75
75
81
81
85
78
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
123
Output
kW
Motor type
Product code
Speed
r/min
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2)
2)
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M4A
71 M4B
80 M4A
80 M4B
90 S4A
90 L4A
100 L4A
100 L4B
112 M4A
132 S4A
132 M4A
160 M4A
160 L4A
180 M4A
180 L4A
200 L4A
225 S4A
225 M4A
250 M4A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
5.5
9.2
11
18.5
30
37
55
75
110
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L4A
132 M4B
132 M4C
160 L4B
180 L4B
200 L4B
225 M4B
250 M4B
280 SMC
Power
Current
Full
load
100%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
1.71
2.53
3.73
5.06
7.5
10.31
14.69
20.18
26.71
36.73
49.74
71
98
120
142
194
238
290
354
483
580
707
849
1028
1286
1604
2.1
2.1
2.4
2.4
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.4
2.3
2.3
2.4
2.2
2.2
2.2
2.4
2.1
2.1
1.7
1.9
2.1
2.1
2.0
2.7
2.7
2.7
2.6
2.4
2.6
2.7
2.8
2.8
2.9
2.7
2.8
2.6
3.4
3.0
2.9
2.7
2.7
2.7
2.6
2.4
2.3
2.4
2.6
2.5
2.6
2.2
2.2
2.2
2.2
2.2
2.2
2.3
2.3
2.7
2.2
2.2
2.2
2.4
2.6
2.6
2.4
2.4
2.8
3/4
load
75%
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
072 301-A
072 302-A
082 301-A
082 302-A
092 101-A
092 501-A
102 501-A
102 502-A
112 301-A
132 101-A
132 301-A
162 301-A
162 501-A
182 301-A
182 501-A
202 501-A
222 101-A
222 301-A
252 301-A
282 210-D
282 220-D
312 210-D
312 220-D
312 230-D
312 410-D
352 100-D
Efciency
1395
1395
1410
1415
1400
1390
1430
1420
1430
1430
1440
1460
1460
1470
1470
1470
1480
1480
1480
1483
1481
1486
1485
1486
1485
1488
65.5
68.5
73.5
74.5
77.5
78.5
81.5
82.8
85.0
86.0
88.5
89.5
90.0
91.0
91.5
92.2
92.6
92.8
93.4
94.2
94.6
94.6
94.9
95.4
95.7
95.6
Basic design
63.3
69.4
71.4
75.2
77.8
79.2
82.3
82.5
84.6
87.1
88.3
90.0
90.4
90.9
90.0
91.8
91.2
91.7
91.3
94.2
94.7
94.2
94.7
95.2
95.6
95.3
0.72
0.75
0.72
0.75
0.78
0.79
0.81
0.83
0.82
0.85
0.85
0.85
0.86
0.86
0.88
0.88
0.85
0.87
0.87
0.83
0.86
0.84
0.85
0.85
0.86
0.85
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
112 501-A
132 302-A
132 303-A
162 502-A
182 502-A
202 502-A
222 302-A
252 302-A
282 230-D
1)
2)
1430
1430
1430
1460
1470
1470
1480
1480
1484
84.0
84.0
84.5
87.0
89.0
89.2
91.0
90.4
95.1
Torque
0.77
1.04
1.5
1.93
2.65
3.5
4.85
6.3
8.29
10.9
14.4
20.87
27.97
34.12
39.44
53
67
80
98
138
162
203
239
286
354
448
5.2
5.2
5.2
6.0
6.0
6.0
6.0
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
7.0
7.0
7.0
6.3
6.4
6.4
6.1
6.7
6.4
6.7
High-output design
95.1
0.83
0.85
0.85
0.86
0.88
0.88
0.87
0.87
0.85
11.39
18.6
22.11
35.69
55
68
100
137
196
7.0
6.5
6.5
6.5
6.5
6.5
7.0
7.0
7.1
36.7
61
73
121
195
240
355
484
708
124
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Output
kW
Motor type
Speed
r/min
Efciency
%
380 V 50 Hz
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
1385
1385
1400
1405
1390
1380
1420
1410
1420
1420
1430
1455
1452
1465
1465
1465
1475
1475
1477
1480
1478
1484
1483
1483
1482
1487
2)
2)
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M4A
71 M4B
80 M4A
80 M4B
90 S4A
90 L4A
100 L4A
100 L4B
112 M4A
132 S4A
132 M4A
160 M4A
160 L4A
180 M4A
180 L4A
200 L4A
225 S4A
225 M4A
250 M4A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
66.0
69.0
73.5
74.5
77.0
78.5
81.5
82.5
84.5
85.5
88.0
89.5
90.0
91.0
91.5
92.3
92.3
92.6
93.2
94.0
94.2
94.5
94.8
95.0
95.2
95.6
Power
factor
cos
Current
IN
Speed
A
r/min
94.8
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.74
0.78
0.75
0.78
0.80
0.80
0.82
0.85
0.84
0.87
0.85
0.87
0.88
0.88
0.90
0.89
0.85
0.88
0.88
0.85
0.86
0.85
0.86
0.86
0.86
0.86
0.78
1.05
1.52
1.97
2.72
3.64
4.98
6.5
8.57
11.3
15.2
21.46
28.78
35.1
40.59
55
71
83
102
143
169
209
248
300
375
465
380 V 50 Hz
112 L4A
132 M4B
132 M4C
160 L4B
180 L4B
200 L4B
225 M4B
250 M4B
280 SMC 1481
Efciency
%
0.86
1)
2)
204
1405
1405
1420
1425
1410
1400
1440
1430
1440
1440
1450
1463
1461
1470
1475
1470
1480
1480
1482
1484
1483
1487
1486
1487
1486
1489
64.0
68.0
72.5
74.0
77.5
78.5
81.4
82.7
85.0
86.5
88.0
89.5
90.0
91.0
91.5
86.8
92.0
92.8
93.6
94.2
94.7
94.6
95.0
95.4
95.7
95.6
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.69
0.71
0.68
0.72
0.75
0.77
0.78
0.82
0.8
0.83
0.84
0.83
0.85
0.82
0.86
0.87
0.82
0.85
0.86
0.82
0.85
0.82
0.84
0.84
0.85
0.84
0.79
1.07
1.55
1.96
2.65
3.48
4.85
6.17
8.24
10.7
14.1
20.6
27.28
34.49
38.9
55
68
79
95
137
157
198
232
279
343
438
0.00053
0.00066
0.00145
0.00174
0.00254
0.00317
0.00679
0.00862
0.01306
0.02673
0.03432
0.06543
0.09349
0.16049
0.18046
0.2819
0.37
0.42
0.78
1.05
1.32
1.9
2.2
2.6
3.2
5.4
11
11
16
17
21
25
32
36
45
60
73
116
137
170
186
254
308
335
450
560
600
800
855
930
1030
1500
43
45
46
46
52
52
53
53
56
59
59
66
66
66
66
71
73
73
76
71
71
78
78
78
78
82
415 V 50 Hz
High-output design
1485
0.01484
0.0347
0.04227
0.10686
0.20783
0.29715
0.6244
0.9125
1.7
95.2
0.84
191
49
75
80
147
200
277
351
485
660
64
71
73
66
70
72
75
77
71
125
Output
kW
Motor type
Product code
Speed
r/min
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M6A
71 M6B
80 M6A
80 M6B
90 S6A
90 L6A
100 L6A
112 M6A
132 S6A
132 M6A
132 M6B
160 M6A
160 L6A
180 L6A
200 L6A
200 L6B
225 M6A
250 M6A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
3
6.5
14
18.5
30
37
45
75
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M6B
132 M6C
160 L6B
180 L6B
200 L6C
225 M6B
250 M6B
280 SMC
Power
Current
Full
load
100%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
1.89
2.68
3.8
5.68
7.79
11.42
15.24
22.35
29.84
39.79
54
73
108
146
180
214
292
360
434
531
722
867
1060
1272
1540
1.8
1.8
1.9
1.9
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.2
2.3
2.2
2.1
2.2
2.3
2.4
2.4
1.9
1.9
2.1
2.2
1.8
2.4
2.5
2.0
1.8
2.3
2.6
2.4
2.3
2.4
2.9
3.0
2.3
2.4
2.9
2.5
3.2
2.9
2.6
2.4
2.4
2.3
2.3
2.6
2.5
2.3
1.9
1.9
2.1
2.2
2.0
2.1
2.2
2.6
2.1
2.1
2.2
2.7
2.6
2.6
2.6
2.5
3/4
load
75%
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
073 301-A
073 302-A
083 301-A
083 302-A
093 101-A
093 501-A
103 501-A
113 301-A
133 101-A
133 301-A
133 302-A
163 301-A
163 501-A
183 501-A
203 501-A
203 502-A
223 301-A
253 301-A
283 210-D
283 220-D
313 210-D
313 220-D
313 230-D
313 410-D
353 100-D
Efciency
910
890
930
925
920
920
940
940
960
960
960
970
970
980
980
980
980
980
990
989
992
991
991
991
992
55.0
60.0
63.0
65.0
71.0
73.0
76.0
80.0
82.5
84.0
86.0
88.0
88.5
89.0
90.3
90.4
90.8
92.2
93.5
93.8
94.2
94.8
95.1
95.3
95.3
Basic design
50.1
58.3
63.2
65.1
70.2
73.1
75.3
81.2
83.5
84.2
85.6
88.3
88.6
89.1
90.2
90.3
89.2
92.4
93.3
93.7
94.0
94.7
95.0
95.2
95.2
0.65
0.65
0.66
0.68
0.72
0.74
0.77
0.76
0.78
0.77
0.79
0.78
0.78
0.82
0.82
0.83
0.78
0.88
0.82
0.83
0.8
0.83
0.82
0.83
0.83
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
113 302-A
133 303-A
163 502-A
183 502-A
203 503-A
223 302-A
253 302-A
283 230-D
1)
2)
950
970
970
980
980
980
980
989
77.0
83.0
85.5
86.0
87.4
87.8
89.2
94.5
Torque
0.73
0.93
1.29
1.8
2.12
2.94
3.78
5.23
6.73
8.93
11.7
15.77
23
29.67
36.06
42.32
61
66
85
103
145
166
206
242
293
4.0
4.0
5.0
5.0
5.0
5.0
5.5
5.5
6.5
6.5
6.5
6.0
6.0
6.0
6.0
6.0
6.6
6.8
6.7
6.4
6.3
6.5
6.7
6.5
6.2
High-output design
94.5
0.76
0.78
0.78
0.82
0.78
0.78
0.88
0.83
740
14.49
30.3
37.87
63
78
82
139
6.5
6.5
6.0
6.0
6.0
6.6
6.8
6.9
30.2
64
138
180
292
361
439
724
126
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Output
kW
Motor type
Speed
r/min
Efciency
%
380 V 50 Hz
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
905
885
925
920
915
915
935
935
955
955
945
968
966
980
975
975
980
978
988
987
990
990
990
989
991
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M6A
71 M6B
80 M6A
80 M6B
90 S6A
90 L6A
100 L6A
112 M6A
132 S6A
132 M6A
132 M6B
160 M6A
160 L6A
180 L6A
200 L6A
200 L6B
225 M6A
250 M6A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
55.5
60.0
63.5
65.0
71.0
73.0
76.0
79.0
82.0
84.0
85.5
88.0
88.5
89.0
90.6
90.9
90.5
92.0
93.9
93.5
94.1
95.7
94.9
95.1
95.2
Power
factor
cos
Current
IN
Speed
A
r/min
94.3
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.69
0.65
0.7
0.71
0.75
0.77
0.79
0.77
0.81
0.77
0.8
0.79
0.8
0.84
0.84
0.84
0.78
0.9
0.83
0.84
0.82
0.84
0.83
0.83
0.83
0.72
0.98
1.29
1.82
2.13
2.98
3.8
5.5
6.87
9.39
12.3
16.39
23.61
30.48
36.94
43.79
64
68
89
108
148
174
215
255
307
380 V 50 Hz
112 M6B
132 M6C
160 L6B
180 L6B
200 L6C
225 M6B
250 M6B
280 SMC 987
Efciency
%
0.84
1)
2)
144
915
895
935
930
925
925
945
945
965
965
955
975
975
985
980
980
980
982
990
990
992
992
991
991
993
52.5
59.0
62.0
65.5
70.5
73.0
75.5
80.0
82.5
84.0
86.0
88.0
88.5
89.0
90.1
90.1
90.9
92.3
93.5
93.8
94.2
94.8
95.0
95.3
95.3
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.62
0.62
0.62
0.66
0.69
0.7
0.75
0.75
0.76
0.75
0.78
0.75
0.75
0.79
0.79
0.81
0.76
0.86
0.8
0.82
0.77
0.81
0.8
0.82
0.82
0.77
0.95
1.33
1.79
2.15
2.98
3.73
5.14
6.66
8.84
11.4
15.81
23.06
29.68
36.16
41.93
60
64
84
101
143
163
203
237
287
0.00056
0.00074
0.00159
0.00196
0.00292
0.00379
0.00999
0.03116
0.03116
0.04074
0.05332
0.09231
0.1297
0.2418
0.34174
0.46837
0.62691
0.97
1.6
1.9
2.8
3.6
4.4
5.3
7.3
10
11
17
18
21
25
32
40
55
65
75
119
140
180
231
254
308
382
540
580
780
870
930
1040
1500
42
42
45
45
48
48
51
54
56
56
56
61
62
63
64
64
66
68
71
71
75
75
75
75
77
415 V 50 Hz
High-output design
990
0.0199
0.0611
0.139
0.283984
0.495
0.803267
1.32
2.6
94.6
0.82
135
45
75
155
196
291
351
455
660
56
59
64
65
66
68
71
71
127
Output
kW
Motor type
Product code
Speed
r/min
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
80 M8A
80 M8B
90 S8A
90 L8A
100 L8A
100 L8B
112 M8A
132 S8A
132 M8A
160 M8A
160 M8B
160 L8A
180 L8A
200 L8A
225 S8A
225 M8A
250 M8A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
2
3.8
8.5
15
18.5
30
37
55
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M8B
132 M8B
160 L8B
180 L8B
200 L8B
225 M8B
250 M8B
280 SMC
Power
Current
Full
load
100%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
2.46
3.41
5.05
7.5
10.23
15.01
20.46
29.59
40.35
53
72
99
143
196
238
283
387
477
580
708
968
1161
1420
1697
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
2.1
2.1
2.1
2.0
2.3
2.1
2.2
2.3
1.8
1.9
1.6
1.7
1.8
1.8
1.3
1.9
1.9
1.9
2.0
2.2
2.4
2.4
2.5
2.2
2.6
2.8
2.5
2.8
2.8
2.7
2.7
2.4
3.0
3.2
2.7
2.7
2.7
2.7
2.3
1.7
1.7
2.0
1.9
1.9
2.1
2.2
1.9
1.9
1.9
2.4
2.6
2.6
2.6
2.5
3.2
3/4
load
75%
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
084 301-A
084 302-A
094 101-A
094 501-A
104 501-A
104 502-A
114 301-A
134 101-A
134 301-A
164 301-A
164 302-A
164 501-A
184 501-A
204 501-A
224 101-A
224 301-A
254 301-A
284 210-D
284 220-D
314 210-D
314 220-D
314 230-D
314 410-D
354 100-D
Efciency
700
700
700
700
700
700
700
710
710
720
720
720
730
730
740
740
740
741
741
742
741
741
740
743
51.0
54.5
62.5
63.5
70.0
71.5
75.0
81.0
81.0
84.0
85.5
86.5
87.7
89.0
90.0
90.5
91.3
93.5
94.0
94.1
94.4
94.8
95.0
95.0
Basic design
50.1
53.3
62.1
63.3
70.1
70.3
75.4
81.8
81.4
84.0
85.6
85.8
87.0
89.4
89.1
88.2
90.1
93.3
93.8
94.0
94.3
94.7
95.0
94.9
0.6
0.6
0.6
0.6
0.64
0.65
0.68
0.7
0.75
0.73
0.74
0.74
0.77
0.76
0.75
0.75
0.79
0.78
0.78
0.81
0.82
0.82
0.83
0.81
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
114 302-A
134 302-A
164 502-A
184 502-A
204 502-A
224 302-A
254 302-A
284 230-D
1)
2)
700
710
720
730
730
740
740
741
72.0
78.0
83.5
84.7
86.0
87.5
88.3
94.4
Torque
0.85
1.11
1.42
2.07
2.42
3.45
4.27
5.6
7.13
9.42
12.55
16.91
23.51
32.009
39.56
46.78
60
74
90
104
141
167
203
247
3.3
3.6
4.4
4.7
5.0
5.0
5.0
5.5
5.5
5.5
5.5
5.5
5.4
5.5
5.5
6.0
6.5
7.3
7.6
7.1
7.1
7.4
7.3
6.5
High-output design
94.3
0.68
0.75
0.74
0.77
0.76
0.75
0.79
0.79
5.94
9.38
19.86
33.2
40.85
66
76
108
5.2
5.5
5.5
5.4
5.4
6.3
6.5
7.8
27.3
51
113
196
242
387
478
709
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Output
kW
Motor type
EfSpeed ciency
r/min %
380 V 50 Hz
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
695
695
695
695
695
695
695
705
705
715
715
715
725
725
740
740
738
740
740
741
740
740
739
742
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
80 M8A
80 M8B
90 S8A
90 L8A
100 L8A
100 L8B
112 M8A
132 S8A
132 M8A
160 M8A
160 M8B
160 L8A
180 L8A
200 L8A
225 S8A
225 M8A
250 M8A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M8B
132 M8B
160 L8B
180 L8B
200 L8B
225 M8B
250 M8B
280 SMC
51.0
54.0
62.0
63.0
70.0
71.5
75.0
80.5
81.0
84.0
85.5
86.5
87.7
88.9
89.9
90.4
91.1
93.2
93.8
93.9
94.2
94.6
94.9
94.9
Power
factor
cos
Current
IN
Speed
A
r/min
94.2
1)
2)
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.61
0.61
0.61
0.61
0.67
0.68
0.68
0.75
0.78
0.76
0.76
0.77
0.79
0.78
0.75
0.76
0.8
0.8
0.8
0.83
0.83
0.84
0.84
0.82
0.88
1.16
1.49
2.18
2.43
3.45
4.47
5.6
7.22
9.52
12.86
17.11
24.12
32.86
41.69
48.65
63
75
92
108
147
173
210
258
380 V 50 Hz
740
Efciency
%
0.81
110
705
705
705
705
705
705
705
715
715
720
720
722
730
730
745
745
741
742
742
743
742
742
741
743
51.5
54.5
62.5
63.5
69.0
70.5
75.0
80.5
81.0
84.0
85.5
86.5
87.7
88.8
90.3
90.3
91.4
93.4
94.0
94.1
94.4
94.8
95.0
95.0
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.6
0.6
0.6
0.6
0.64
0.62
0.67
0.69
0.72
0.7
0.7
0.7
0.74
0.74
0.71
0.71
0.78
0.76
0.75
0.79
0.81
0.81
0.81
0.8
0.82
1.08
1.38
2.01
2.39
3.47
4.16
5.55
7.11
9.46
12.78
17.23
23.58
31.75
40.14
47.74
58
73
90
103
137
164
198
244
0.00111
0.00326
0.00541
0.00756
0.00971
0.01186
0.01559
0.03625
0.04141
0.0676
0.09524
0.12122
0.23645
0.37103
0.53287
0.65825
0.975
1.85
2.2
3.2
4.1
4.9
5.8
7.3
16
17
21
24
31
34
42
56
64
105
125
142
176
235
290
302
392
570
610
820
910
980
1100
1500
42
42
46
46
53
53
55
55
56
58
58
58
61
63
65
65
67
65
65
65
65
65
72
75
415 V 50 Hz
High-output design
742
0.0199
0.04776
0.1312
0.283984
0.46854
0.803267
1.28
2.85
94.4
0.77
106
45
75
136
196
274
349
436
690
58
59
61
63
65
67
69
65
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
129
Variant
Motor size
719080
100
1)
112132
160180
200250
280355
Balancing
052
NA
NA
NA
424
NA
417
NA
NA
NA
NA
037
NA
NA
NA
039
040
041
NA
NA
NA
043
NA
NA
NA
NA
178
209
NA
425
785
Reinforced tropicalisation.
Cooling system
068
Metal fan.
183
NA
Dimension drawing
141
Drain holes
065
NA
NA
NA
NA
NA
066
NA
NA
NA
NA
NA
076
Earthing bolt
067
Heating elements
Motor size
71-160
180-280
315
355
Element capacity
25 W
50 W
1 x 65 W
2 x 65 W
450
451
Insulation system
014
NA
405
NA
*)
130
=
=
Included as standard
On modication of a stocked motor, or on new
manufacture,the number per order may be limited.
P
R
NA
=
=
=
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Code
Variant
Motor size
719080
100
1)
112132
160180
200250
280355
Mounting arrangements
008
IM2101 foot/ange mounted, IEC ange, from IM1001(B34 from B3). Not
possible for frame size 132.
NA
NA
NA
009
047
IM 3601 ange mounted, IEC ange, from IM3001 (B14 from B5). Not posM
sible for frame size 132.
(IM 3601) ange mounted, DIN C-ange. Larger ange than standard verM
sion. Not possible for frame size 132.
(IM 2101) foot/ange mounted, DIN C-ange, from IM 1001 (B34 from B3).
M
Not possible for frame size 132.
NA
NA
NA
NA
NA
NA
NA
NA
NA
078
090
Painting
114
Protection
005
072
073
158
NA
211
Weather protected, IP xx W.
NA
401
403
NA
095
135
138
139
161
*)
=
=
Included as standard
On modication of a stocked motor, or on new
manufacture,the number per order may be limited.
P
R
NA
=
=
=
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Code
Variant
Motor size
719080
100
1)
112132
160180
200250
280355
435
436
437
439
441
442
445
Pt100 (1per phase) in stator winding. Not available for frame size 71.
Terminal box
015
017
021
NA
137
NA
157
180
NA
230
231
NA
400
NA
418
467
468
469
NA
NA
NA
731
NA
NA
NA
NA
NA
Testing
145
146
Type test with report for motor from specic delivery batch.
148
760
762
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
704
NA
NA
NA
NA
NA
*)
132
=
=
Included as standard
On modication of a stocked motor, or on new
manufacture,the number per order may be limited.
P
R
NA
=
=
=
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Sizes 71-132
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1011), IM B7 (IM 1061),
IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
Three phase motor, foot-mounted, terminal box top-mounted
4
Motor
size
Poles
AA
AB
AC
AD
BB
DB
EG
71M
2-6
112
30
145
145
120
90
110
45
14
M5
30
12.5
80M
2-6
125
35
160
165
145
100
135
50
19
M6
40
16
90S
2-6
140
35
175
180
150
100
140
56
24
M8
50
19
90L
2-6
140
35
175
180
150
125
165
56
24
M8
50
19
100L
2-6
160
40
200
205
175
140
180
63
28
M10
60
22
112M
2-8
190
50
235
225
185
140
190
70
28
M10
60
22
132S
2-8
216
55
270
265
205
140
205
89
38
M12
80
28
132M
2-8
216
55
270
265
205
178
240
89
38
M12
80
28
Motor
size
Poles
GD
HA
HD
HF
LD
71 M
2-6
11
71
10
200
255
100
80 M
2-6
15.5
80
12
225
170
10
285
116
90 S
2-6
20
90
12
240
185
10
310
128
90 L
2-6
20
90
12
240
185
10
335
128
100 L
2-6
24
100
14
275
245
12
380
144
112 M
2-6
24
112
15
290
265
12
380
144
132 S
2-6
10
33
132
18
335
300
12
465
169
132 M
2-6
10
33
132
18
335
300
12
505
169
Tolerances:
A, B, C +, - 0.8
D,DA
ISO m6
F, FA
ISO h9
H + 0, - 0.5
N ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
133
Sizes 71-132
Dimension drawings
Flange-mounted; IM B5 (IM 3001), IM V1 IM 3001), IM V3 (IM 3031)
IM B14 (IM 3601), IM V18 (IM 3611), IM V19 (IM 3631)
Three phase motor, ange- mounted
4
IM B5 (IM3001), IM V1 (IM3011), IM V3 (IM3031)
Type
M2QA
Poles
AC
AD
DB
EG
GD
HE
71M
80M
2-6
2-8
145
165
120
145
14
19
M5
M6
30
40
12.5
16
5
6
90S
90L
2-8
2-8
180
180
150
150
24
24
M8
M8
50
50
19
19
100L
2-8
205
175
28
M10
60
112M
2-8
225
185
28
M10
60
132S
132M
2-8
2-8
265
265
205
205
38
38
M12
M12
80
80
LA
11
15.5
5
6
165
200
255
285
9
9
8
8
20
20
7
7
200
200
310
335
22
24
265
22
24
270
28
28
10
10
33
33
8
8
320
320
130
165
110
130
160
200
10
12
3.5
3.5
10
10
165
165
130
130
200
200
12
12
3.5
3.5
380
11
215
180
250
15
395
11
215
180
250
15
465
505
12
12
265
265
230
230
300
300
15
15
4
4
Flange HE
size
71M
C105
145
C120
165
C140
185
C140
C160
C160
C200
C160
265
90L
2-6
C140
2-8
C160
2-8
C160
2-8
100L
2-8
112M
2-8
C200
80M
90S
Tolerances:
D,DA
ISO m6
F, FA
ISO h9
N
ISO j6
134
145
140
165
160
185
160
185
185
255
255
265
200
P
105
115
120
130
140
130
140
160
160
200
160
165
85
95
100
110
115
110
115
130
130
165
130
130
70
M8
80
M8
95
M8
95
110
110
130
110
M10
M6
3
M6
3.5
M8
3.5
M8
M8
M8
M10
M8
3.5
2.5
3
3
3
3.5
3.5
3.5
3.5
Sizes 71-132
Dimension drawings
Foot- and ange-mounted; M B35 (IM 2001), IM V15 (IM 2011), IM V 36 (IM 2031)
4
Motor
size
Poles
AA
AB
AC
AD
BB
DB
EG
71M
80M
90S
90L
100L
112M
132S
132M
2-6
2-8
2-8
2-8
2-8
2-8
2-8
2-8
112
125
140
140
160
190
216
216
30
35
35
35
40
50
55
55
145
160
175
175
200
235
270
270
145
165
180
180
205
225
265
265
120
145
150
150
175
185
205
205
90
100
100
125
140
140
140
178
110
135
140
165
180
190
205
240
45
50
56
56
63
70
89
89
14
19
24
24
28
28
38
38
M5
M6
M8
M8
M10
M10
M12
M12
30
40
50
50
60
60
80
80
12.5
16
19
19
22
22
28
28
5
6
8
8
8
8
10
10
Motor
size
Poles
71M
80M
90S
90L
100L
112M
132S
132M
2-6
2-8
2-8
2-8
2-8
2-8
2-8
4-8
Tolerances:
A, B, C +- 0.8
D,DA
ISO m6
F, FA
ISO h9
GD
HA
HD
HF
11
15.5
20
20
24
24
33
33
5
6
7
7
7
7
8
8
71
80
90
90
100
112
132
132
10
12
12
12
14
15
18
18
200
225
240
240
275
290
335
335
170
185
185
245
265
300
300
7
10
10
10
12
12
12
12
LA
LD
255
285
310
335
380
395
465
505
9
9
10
10
11
11
12
12
100
116
128
128
138
144
169
169
130
165
165
165
215
215
265
265
110
130
130
130
180
180
230
230
160
200
200
200
250
250
300
300
10
12
12
12
15
15
15
15
3.5
3.5
3.5
3.5
4
4
4
4
H + 0, -0.5
N ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
135
Sizes 160-250
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061),
IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
Three phase motor, foot-mounted, terminal box top-mounted
Poles
AA
AB
AC
AD
BB
DB
EG
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
254
254
279
279
318
356
356
356
406
406
60
60
70
70
70
75
75
75
80
80
325
325
350
350
390
435
435
435
490
490
330
330
355
350
395
440
450
450
515
515
255
255
270
270
305
335
335
335
395
395
210
254
241
279
305
286
311
311
349
439
265
310
315
350
380
380
405
405
455
455
108
108
121
121
133
149
149
149
168
168
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
110
110
110
110
110
140
110
140
140
140
36
36
36
36
39
39
39
39
39
39
Motor
size
Poles
GD
HA
HD
HF
LD
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
12
12
14
14
16
18
16
18
18
18
47
47
42.5
42.5
49
53
49
53
53
58
8
8
9
9
10
11
10
11
11
11
160
160
180
180
200
225
225
225
250
250
22
22
22
22
25
28
28
28
30
30
415
415
450
450
510
560
560
560
645
645
380
380
420
420
470
520
520
520
580
580
15
15
15
15
19
19
19
19
24
24
600
645
670
710
770
820
815
840
930
930
250
250
270
270
285
340
310
340
360
360
Tolerances:
A, B, C +, - 0.8
D,DA
ISO k6 < 50 mm
ISO h9 > 50 mm
136
F, FA ISO h0
H
+ 0, - 0.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Sizes 160-250
Dimension drawings
Flange-mounted; IM B5 (IM 3001), IM V1 (IM 3011), IM V3 (IM 3031),
IM B14 (IM 3601), IM V18 (IM 3611), IM V19 (IM 3631)
4
Motor
size
Poles
AD
DB
EG
GD
HE
LA
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
255
255
270
270
305
335
335
335
395
395
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
110
110
110
110
110
140
110
140
140
140
36
36
36
36
39
39
39
39
39
39
12
12
14
14
16
18
16
18
18
18
47
47
42.5
42.5
49
53
49
53
53
53
8
8
9
9
10
11
10
11
11
11
400
400
420
420
470
520
520
520
655
655
600
645
670
710
770
820
815
840
930
930
15
15
18
18
20
20
20
20
22
22
300
300
300
300
350
400
400
400
500
500
250
250
250
250
300
350
350
350
450
450
350
350
350
350
400
450
450
450
550
550
19
19
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
5
5
Tolerances:
D,DA
ISO k6 < 50 mm
ISO m6 > 50 mm
F, FA
ISO h9
N
ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
137
Sizes 160-250
Dimension drawings
Foot- and ange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
Three phase motor, foot-mounted, terminal box top-mounted
Poles
AA
AB
AC
AD
BB
DB
EG
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
254
254
279
279
318
356
356
356
406
406
60
60
70
70
70
75
75
75
80
80
325
325
350
350
390
435
435
435
490
490
330
330
355
350
395
440
450
450
515
515
255
255
270
270
305
335
335
335
395
395
210
254
241
279
305
286
311
311
349
439
265
310
315
350
380
380
405
405
455
455
108
108
121
121
133
149
149
149
168
168
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
110
110
110
110
110
140
110
140
140
140
36
36
36
36
39
39
39
39
39
39
12
12
14
14
16
18
18
18
18
18
47
47
42.5
42.5
49
53
49
53
53
53
Motor
size
Poles
GD
HA
HD
HF
LA
LD
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
8
8
9
9
10
11
10
11
11
11
160
160
180
180
200
225
225
225
250
250
22
22
22
22
25
28
28
28
30
30
415
415
450
450
510
560
560
560
645
645
380
380
420
420
470
520
520
520
580
580
15
15
15
15
19
19
19
19
24
24
600
645
670
710
770
820
815
840
930
930
15
15
18
18
20
20
20
20
22
22
250
250
270
270
285
340
310
340
360
360
300
300
300
300
350
400
400
400
500
500
250
250
250
250
300
350
350
350
450
450
350
350
350
350
400
450
450
450
550
550
19
19
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
5
5
Tolerances:
A, B, C +, - 0.8
D,DA
ISO k6 > 50 mm
ISO m6 > 50 mm
138
F, FA ISO h9
H
+ 0, - 0.5
N
ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Sizes 280-315
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061),
IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
4
Motor
size
Poles A
AA
AB
AC
B'
BA
BB
CA
CA '
DA
DB
DC
EA
EG
EH
280 SM_ 2
4-12
457 85
457 85
530
530
572
572
368
368
419
419
146 506
146 506
190
190
400
400
349
349
65
75
60
65
M20
M20
M20
M20
140
140
140
140
40
40
40
40
315 SM_ 2
4-12
508 100
508 100
590
590
645
645
406
406
457
457
163 556
163 556
216
216
465
465
414
414
65
80
60
75
M20
M20
M20
M20
140
170
140
140
40
40
40
40
315 ML_ 2
4-12
508 100
508 100
590
590
645
645
457
457
508
508
163 607
163 607
216
216
465
465
414
414
65
90
60
75
M20
M24
M20
M20
140
170
140
140
40
48
40
40
355 _
2
4-12
610 120
610 120
700
700
740
740
500
500
161 662
161 662
254
254
460
460
70
100
70
90
M20
M24
M20
M24
140
210
140
170
40
48
40
48
Motor
size
Poles F
GA
GB
GC
GD GF
HA
HC
HD
LA
LC
LD
FA
1)
280 SM_ 2
4-12
18
20
18
18
58
69
53
67.5 79.5 58
315 SM_ 2
4-12
18
22
18
20
58
71
315 ML_ 2
4-12
18
25
18
20
58
84
355 S_
20
28
20
25
2
4-12
Tolerances:
D, DA ISO M6
H
+ 0, - 1.0
11
12
11
11
280
280
40
40
566
566
745
745
24
24
1088
1088
22
22
1238
1238
332
332
100
100
69
85
53
64
11
67.5 79.5 14
11
12
315
315
50
50
638
638
840
840
30
30
1218
1248
25
25
1367
1397
351
381
115
115
69
95
53
64
11
67.5 79.5 14
11
12
315
315
50
50
638
638
840
840
30
30
1269
1299
25
25
1418
1448
351
381
115
115
12
14
355
355
55
55
725
725
955
955
35
35
1344
1414
25
25
1494
1594
397
467
130
130
1)
2)
64
69
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&drives' or contact us.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
139
Sizes 280-355
Dimension drawings
Flange-mounted; IM B5 (IM 3001), IM V1 IM 3001), IM V3 (IM 3031)
IM B14 (IM 3601), IM V18 (IM 3611), IM V19 (IM 3631)
4
Motor
size
Poles
AC
DA
DB
DC
EA
EG
EH
FA
GA
GB
GC
GD
GF
280 SM_
2
4-12
572
572
65
75
60
65
M20
M20
M20
M20
140
140
140
140
40
40
40
40
18
20
18
18
58
67.5
69
79.5
53
58
64
69
11
12
11
11
315 SM_
2
4-12
645
645
65
80
60
75
M20
M20
M20
M20
140
170
140
140
40
40
40
40
18
22
18
20
58
71
69
85
53
67.5
64
79.5
11
14
11
12
315 ML_
2
4-12
645
645
65
90
60
75
M20
M24
M20
M20
140
170
140
140
40
48
40
40
18
25
18
20
58
81
69
95
53
67.5
64
79.5
11
14
11
12
355 S_
2
4-12
746
645
70
100
70
90
M20
M24
M20
M24
140
210
140
170
40
48
40
48
20
28
20
25
62.5
90
74.5
106
62.5
81
74.5
95
12
16
12
14
Motor
size
Poles
HB
LA
LB
LC
LD
280 SM_
2
4-12
465
465
1088
1088
22
22
938
938
1238
1238
332
332
500
500
450
450
100
100
550
550
18
18
5
5
315 SM_
2
4-12
525
525
1218
1248
25
25
1078
1078
1367
1397
351
381
600
600
550
550
115
115
660
660
23
23
6
6
315 ML_
2
4-12
525
525
1269
1299
25
25
1129
1199
1418
1448
351
381
600
600
550
550
115
115
660
660
23
23
6
6
355 S_
2
4-12
600
600
1344
1414
25
25
1204
1204
1494
1594
397
467
740
740
680
680
130
130
800
800
23
23
6
6
1)
Tolerances:
D, DA ISO M6
F
ISO h9
H
+ 0, - 1.0
N
ISO j6 (280)
ISO js6 (315)
1)
2)
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&drives' or contact us.
140
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Sizes 280-355
Dimension drawings
Foot- and ange-mounted; M B35 (IM 2001), IM V15 (IM 2011), IM V 36 (IM 2031)
4
Motor
size
Poles A
AA
AB
AC B
B'
BA
BB
CA
CA ' D
DA
DB
DC
EA
EG
EH
FA
280 SM_ 2
4-12
457 85
457 85
400
400
349 65
349 75
60
65
M20
M20
M20 140
M20 140
140
140
40
40
40
40
18
20
18
18
315 SM_ 2
4-12
508 100
508 100
465
465
414 65
414 80
60
75
M20
M20
M20 140
M20 170
140
140
40
40
40
40
18
22
18
20
315 ML_ 2
4-12
508 100
508 100
465
465
414 65
414 90
60
75
M20
M24
M20 140
M20 170
140
140
40
48
40
40
18
25
18
20
355 _
2
4-12
610 120
610 120
460
460
70
100
70
90
M20
M24
M20 140
M24 210
140
170
40
48
40
48
20
28
20
25
Motor
size
Poles G
GB
HD
LA
LC
LD
GA
GC GD GF
HA
HC
1)
280 SM_ 2
4-12
58 69
53
67.5 79.5 58
315 SM_ 2
4-12
58
71
315 ML_ 2
4-12
58
84
355 S_
2
4-12
11 11
12 11
280 40
280 40
566
566
745
745
24
24
1088 22
1088 22
1238 332
1238 332
500
500
450
450
550
550
18
18
5
5
100
100
69
85
53 64 11 11
67.5 79.5 14 12
315 50
315 50
638
638
840
840
30
30
1218 25
1248 25
1367 351
1397 381
600
600
550
550
660
660
23
23
6
6
115
115
69
95
53 64 11 11
67.5 79.5 14 12
315 50
315 50
638
638
840
840
30
30
1269 25
1299 25
1418 351
1448 381
600
600
550
550
660
660
23
23
6
6
115
115
355 55
355 55
725
725
955
955
35
35
1344 25
1414 25
1494 397
1594 467
645
715
740
740
680
680
23
23
6
6
130
130
Tolerances:
D, DA ISO M6
F
ISO h9
H
+ 0, - 1.0
N
ISO j6 (280)
ISO js6 (315)
64
69
1)
2)
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&drives' or contact us.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
141
Rating plates
For motor sizes 71 to 132 the rating plate gives one
current value for the voltage area. That is the highest
current that can occur within the voltage area with the
given output.
142
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Motor construction
13
12
11
10
9
8
7
1
2
3
4
5
6
7
Endshield, D-end
Terminal box
Rating plate
Rotor
Fan
Fan cover
Terminal box cover
8
9
10
11
12
13
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Stator
Bolt
Bearing
Wave-shape spring ring
Endshield, N-end
Screw
143
71
90
100
112
132
Material
Paint thickness
160
Bearing end
Material
shields
Paint thickness
D-end
6202
DDU C3
6204
DDU C3
6205
DDU C3
6206
DDU C3
6207
DDU C3
6208
DDUC3
6309
DDU C3
N-end
6202
DDU C3
6204
DDU C3
6205
DDU C3
6206
DDU C3
6206
DDU C3
6207
DDU C3
6209
DDU C3
Bearings
Axially-locked
bearings
Lubrication
80
Rating plate
Material
Stainless steel
Terminal box
Frame material
Cover material
Connections
Fan
Fan cover
Stator winding
Rotor winding
Cable entries
Terminals
Material
Material
Steel
Paint thickness
Material
Insulation
Copper
Insulation class F
Winding protection
On request
Material
Balancing method
Key ways
Enclosure
IP 55
Cooling method
IC 411
144
2xM40x1.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
Bearings
Axially-locked
bearings
180
Terminal box
225
250
280
315
Material
Paint thickness
Material
Paint thickness
D-end 2 pole
4 to 8 pole
6310
DDU C3
6312
DDU C3
6313
ZZ C3
6314 C3
6316/C4
6316/C3
6316/C4
6319/C3
6316/C3
6322/C3
N-end 2 pole
4 to 8 pole
6210
DDU C3
6212
DDU C3
6213
ZZ C3
6214 C3
6316/C4
6316/C3
6316/C4
6316/C3
6316/C3
6319/C3
Material
Regreasable bearings
Stainless steel
Frame material
Cover material
Cable entries
2xM40x1.5
2xM63 + 2xM20
Terminals
Fan
Material
Fan cover
Material
Steel
Paint thickness
Connections
Stator winding
Rotor winding
355
Lubrication
Rating plate
200
Material
Copper
Insulation
Insulation class F
Winding protection
Material
Balancing method
Key way
Enclosure
IP 55
Cooling method
IC 411
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
145
146
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron GB 12-2004
General Purpose
Open Drip Proof Motors
Open drip proof squirrel cage three phase
low voltage motors,
Sizes 250 - 400, 75 to 800 kW
5
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
Mechanical design...............................148
Ordering information ...........................153
Technical data ......................................154
Variant codes .......................................159
Dimension drawings ...........................161
Rating plates ........................................165
Open drip proof motors in brief .........166
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
147
Mechanical design
Stator
The stator frame is made of prole-pressed sheet steel,
giving the motor high mechanical stregth, low weight
and a good surface nish. The stator core is welded
into the stator frame and contributes to its excellent
mechanical properties.
Feet and lifting eyes are welded to the stator frame. The
Drain holes
Motors that will be operated in very humid or wet
environments, and especially under intermittent duty,
should be provided with drain holes. The appropriate
IM designation, such as IM V3 (IM 3031), is specied,
on the basis of the method of motor mounting.
M2FA motors are tted with drain holes and plugs. The
closed
5
open
open
Terminal box
Terminal boxes are mounted either on the top of the
motor, or on either side of the motor, see ordering information page .
148
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Deviations from standard design according to the following tables are available on request.
Terminal
box
Flange or
adapter
Cable box
or cable gland
Gland
thread
Cable
diameter
Max. connection
cable area
mm2
Terminal
bolt
size
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x150
2x150
2x240
2x240
4x240
2x240
4x240
M12
M12
M12
M12
M12
M12
M12
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x150
2x150
2x240
2x240
4x240
2x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
2x 60-80
2x 60-80
2x 60-80
4x240
4x240
4x240
M12
M12
M12
Voltage/
freq.
code
122/4
122/4
142/4
142/4
162/4
142/4
162/4
3GZF 294730-749
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
D
E
122/4
122/4
142/4
142/4
162/4
142/4
162/4
162/4
3GZF 294730-749
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-501
162/9
162/4
162/9
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
D
E
D
E
122/4
122/4
142/4
142/4
3GZF 294730-749
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 32-49
2x150
2x150
2x240
2x240
M12
M12
M12
M12
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 32-49
2x150
2x150
2x240
2x240
M12
M12
M12
M12
122/4
122/4
142/4
142/4
3GZF 294730-749
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
Voltage/frequency codes:
D - 380-420 VD 50 Hz, 660-690 VY 50 Hz, 440-480 VD 60 Hz
E - 500 VD 50 Hz, 575 VD 60 Hz
Examples:
Adapter E-D
(standard)
3GZF294730-944
Terminal box
Flange with
cable gland
Flange with
cable box
Adapter E-2D
(optional)
3GZF294730-945
Cable box
Optional
3GZF294730-301
Cable box
3GZF294730-501
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
149
Terminal
box
Opening
type
Max.rate
current
A
(Y/D-conn.)
Max. size
of
conductor
mm2
Cable
entry
mm
Cable box
Blank
plate
250
122/4
C (FL21)
210/360
2x150
1xPg29...42
2xPg29...42
1x36...52/48...60
1x36...52/48...60
MKLN 20
280
122/4
C (FL21)
210/360
2x150
1xPg29...42
2xPg29...42
1x36...52/48...60
1x36...52/48...60
MKLN 20
315
142/4
D (FL33)
370/640
2x185
1xPg36...42
2xPg36...48
1x36...52/48...60
2x48...60/50...68
MKLN 30
355, 400
142/4
D (FL33)
370/640
2x240
E-D 1)
550/950
4x240
E-2D1)
550/950
4x240
1x36...52/48...60
2x48...60/50...68
1x36...52/48...60
2x48...60/50...68
2x268.. .80
2x1x36...52/48...60
2x2x48...60/50...68
2x268...80
MKLN 30
162/4
1xPg36...42
2xPg36...48
1xPg36...42
2xPg36...48
1)
2x1Pg36...42
2x2Pg36...48
Terminal box type 162/4 is used with a combination of one E-opening and one or two D-openings,
as described below:
Terminal box 162 with adapting ange 3GZF 294730501 (E-D) or optional 3GZF 294730-301 (E-2D) :
E-opening
Adapter E-2D
Adapter E-D
D-openings
Adaptor E - D
Opening
150
C (FL 21)
62
193
62
193
M8
D (FL 33)
100
300
80
292
M10
E (FL 40)
115
370
100
360
M12
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Bearings
The motors are normally tted with
single-row deep groove ball bearings as listed in the table on the
right. The complete ball bearing
designation is stated on the rating
plate.
Motor
Number
size
of poles
D-end
D-end
250
6316/C4
6316/C4
4-8
6316/C3
6316/C3
(NU 316/C3)
280
315
355
400
1)
N-end
6316/C4
6316/C4
4-8
6319/C3
6316/C3
(NU 319/C3)
6316/C4
6316/C4
4-8
6319/C3
6316/C3
(NU319/C3)
2 1)
4-8
6322/C3
6319/C3
(NU 322/C3)
6322/C3
6319/C3
(NU 322/C3)
Bearing seals
M2FA motors have, as standard, V-rings at both ends.
The size and type of suitable seals are in accordance
with the table below:
Motor size
Number of
poles
d1
d2
B1
Standard design
Axial seal
D-end
N-end
Alternative design
Radial seal (DIN 3760)
250
2
4-8
2
4-8
2
4-8
2
4-8
4-8
80
80
80
95
80
95
95
110
110
100
100
100
120
100
120
120
140
140
13,5
13,5
13,5
13,5
13,5
13,5
13,5
15,5
15,5
10
10
10
12
10
12
12
12
12
VS 280
VS 280
VS 80
VS 80
VS 80
VS 95
VS 95
VS 110
VS 110
80x100x10
80x100x10
80x100x10 1)
95x120x12
80x100x10 1)
95x120x12
95x120x12 1)
110x140x12 1)
110x140x12 1)
280
315
355
400
1)
VS 280
VS 280
VS 80
VS 80
VS 80
VS 80
VS 95
VS 95
VS 95
Viton-seal
V-Ring
Radial seal
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
151
Permissible radial and axial force for a bearing life of 40,000 hours
Motor
size
Number
of poles
Length of
shaft
extension
E (mm)
250
2
4
6
8
140
140
140
140
5750
7250
8300
9150
4700
5950
6800
7450
20000
22600
24600
280
2
4
6
8
140
170
170
170
5850
8900
10200
11200
4500
7050
8100
8900
315
2
4
6
8
140
170
170
170
5800
9000
10200
11300
355
2
4
6
8
140
210
210
210
2
4
6
8
170
210
210
210
400
Ball bearing at
point of application:
X0
Xmax
N
N
Roller bearing at
point of application:
X0
Xmax
N
N
Direction of force
Outwards Upwards
N
N
Downwards
N
12000
12000
12100
3850
4300
5250
6100
6750
7350
8500
9500
2950
3300
3900
4750
26100
29500
32100
11400
11300
11100
3800
5300
6500
7450
7150
8800
10100
11200
2250
3800
4700
5500
4800
7300
8350
9200
26200
29600
32300
14000
14200
14300
3700
5000
6350
7300
7450
9250
10800
12200
1800
2750
3300
4300
6200
12100
13800
15200
5400
9800
11200
12300
36500
41500
45000
18100
20200
21000
2100
4100
5500
6900
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
10500
13500
2)
12200
37500
2)
3900
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
152
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
A
B
M2FA 315 SMA
C
D,E,F, G
3GFA 312 210 - ADA, 003 etc.
1-4
5-6 7 8-10 11 12 13 14
M2FA 315SMA
2
IM B3 (IM 1001)
200 kW
3GFA312210-ASB
A Motor type
B Motor size
C Product code
D Mounting arrangement code
E Voltage and frequency code
F Generation code
G Variant codes
Positions 1 to 4
3GFA = Open drip proof squirrel cage three phase
motor with steel frame
Positions 5 and 6
IEC-frame size
25 = 250 31 = 315
28 = 280 35 = 355
40 = 400
Position 7
Speed (pole pairs)
1 = 2 poles
6 = 8 poles
2 = 4 poles
7 => 12 poles
3 = 6 poles
8 = Two-speed motors
4 = 8 poles
9 = Multi-speed motors
5 = 10 poles
Position 13
Voltage/frequency code
See tables below
Position 8 to 10
Serial number
Position 14
Generation code
A, B, C...
Position 11
- (dash)
B
380 V 50 Hz
D
380-420 V 50 Hz
660-690 VY 50 Hz
440-480 V 60 Hz
E
500 V 50 Hz
575 V 60 Hz
F
500 VY 50 Hz
575 VY 60 Hz
S
220-240 V 50 Hz
380-420 VY 50 Hz
440-480 VY 60 Hz
T
660 V 50 Hz
U
690 V 50 Hz
X
Other rated voltage,
connection or frequency,
max. 690 V
H
415 V 50 Hz
Code letters for supplementting the product code for voltage and frequency two-speed motors:
A
220 V 50 Hz
380 V 50 Hz
380-400 V 50 Hz
440-480 V 60 Hz
500 V 50 Hz
575 V 60 Hz
400-415 V 50 Hz
460-480 V 60 Hz
220-230 V 50 Hz
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
153
Motor type
Product code
2)
1)
5)
5)
5)
5)
160
200
250
315
315
355
400
450
500
600
1)
2)
2)
2)
1)2)
710
800
Tmax
IN
Nm
TN
TN
Basic design
92.6
93.3
94.5
0.84
0.84
0.84
169
203
241
6.0
6.2
7.0
290
355
424
1.5
1.6
2.1
2.2
2.4
2.4
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
315 SA
315 SMA
315 MB
315 MC
315 LA
315 LB
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
311 110-A
311 210-A
311 320-A
311 330-A
311 510-A
311 520-A
2977
2975
2975
2977
2969
2969
94.2
94.4
94.5
94.6
94.9
94.8
0.86
0.86
0.87
0.84
0.89
0.88
289
353
431
573
606
700
6.7
7.1
7.1
7.8
6.8
7.3
513
643
804
1012
1142
1288
1.6
1.8
1.9
2.1
2.0
2.0
2.5
2.6
2.6
2.8
2.5
2.6
M2FA
M2FA
M2FA
M2FA
355 SA
355 MA
355 MB
355 LA
3GFA
3GFA
3GFA
3GFA
351 110-A
351 310-A
351 320-A
351 510-A
2982
2978
2973
2981
94.7
95.0
95.1
95.5
0.88
0.89
0.90
0.89
680
765
851
956
7.1
7.4
6.7
8.7
1280
1443
1606
1794
1.1
1.3
1.2
1.5
2.6
3.0
2.7
3.1
0.83
0.88
242
279
7.1
7.0
400 V 50 Hz
3GFA 251 320-A
3GFA 281 320-A
2964
2971
93.8
94.9
High-output design
400 V 50 Hz
425
514
2.0
2.0
2.6
2.7
Basic design
M2FA
M2FA
M2FA
M2FA
250 SA
250 MA
280 SA
280 SMA
3GFA
3GFA
3GFA
3GFA
252 110-A
252 310-A
282 110-A
282 210-A
1473
1473
1476
1477
92.6
93.0
93.1
93.8
0.82
0.83
0.83
0.84
146
172
211
245
5.5
5.6
5.8
5.9
486
583
713
853
1.8
1.9
1.8
1.8
2.2
2.3
2.4
2.3
M2FA
M2FA
M2FA
M2FA
315 SA
315 SMA
315 MB
315 LA
3GFA
3GFA
3GFA
3GFA
312 110-A
312 210-A
312 320-A
312 510-A
1483
1482
1481
1477
94.6
94.7
94.9
94.5
0.83
0.83
0.83
0.83
297
366
452
577
6.5
6.5
6.7
6.7
1030
1287
1611
2036
1.8
1.8
1.7
2.2
2.5
2.3
2.3
2.5
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
355 SA
355 SB
355 SC
355 MA
355 LA
355 LKD
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
352 110-A
352 120-A
352 130-A
352 310-A
352 510-A
352 540-A
1484
1485
1484
1485
1486
95.0
95.4
95.3
95.4
95.4
0.85
0.82
0.82
0.83
0.81
555
653
733
810
920
6.4
6.6
5.9
6.5
7.7
2027
2282
2574
2896
3213
1.7
1.9
1.7
1.8
2.0
2.4
2.5
2.2
2.4
2.8
0.83
0.81
211
305
5.5
7.2
1)
Ts
2962
2958
2971
Torque
TN
M2FA 250 MB
M2FA 280 MB
1)
Is
M2FA 250 SA
M2FA 250 MA
M2FA 280 SMA
Current
IN
400 V 50 Hz
Speed
r/min
Power
factor
cos
100%
M2FA 250 MB
M2FA 280 MB
4)
4)
4)
400 V 50 Hz
3GFA 252 320-A
3GFA 282 320-A
1471
1480
92.8
94.0
High-output design
714
1032
1.8
2.5
2.3
2.6
154
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
A
Speed
r/min
EfPower Current
ciency factor IN
%
cos A
380 V 50 Hz
90
110
132
M2FA 250 SA
M2FA 250 MA
M2FA 280 SMA
2955
2958
2969
92.6
93.2
94.4
0.86
0.86
0.86
172
208
246
2966
2967
2966
92.7
93.3
94.1
0.81
0.81
0.87
166
200
227
0.4
0.47
0.8
360
395
540
87
87
87
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
315 SA
315 SMA
315 MB
315 MC
315 LA
315 LB
2975
2974
2974
2974
2965
2966
94.2
94.3
94.4
94.6
94.8
94.7
0.87
0.87
0.88
0.86
0.89
0.88
302
370
449
576
635
720
2978
2978
2976
2971
2970
2970
94.2
94.4
94.5
94.6
94.9
94.8
0.84
0.84
0.85
0.88
0.86
0.85
282
344
420
530
591
683
1.2
1.4
1.7
1.7
2.1
2.1
695
770
840
840
975
975
92
92
92
92
92
92
M2FA
M2FA
M2FA
M2FA
355 SA
355 MA
355 MB
355 LA
2980
2975
2970
2978
94.6
94.9
95.1
95.5
0.90
0.90
0.90
0.90
700
795
880
980
2983
2979
2974
94.7
95.0
95.1
0.87
0.87
0.87
663
746
830
3.2
3.5
3.5
4.8
1220
1320
1320
1530
93
93
93
93
0.86
0.88
247
288
0.87
0.86
225
269
160
200
250
315
355
400
400
450
500
560
2)
1)
5)
5)
5)
5)
380 V 50 Hz
132
160
2961
2968
M2FA 250 MB
M2FA 280 MB
93.8
94.8
380 V 50 Hz
75
90
110
132
160
200
250
315
315
355
400
450
500
600
1)
1)
2)
2)
2)
1)2)
710
800
Basic design
415 V 50 Hz
2960
2973
93.7
94.9
High-output design
415 V 50 Hz
0.56
1.15
430
580
88
89
Basic design
M2FA
M2FA
M2FA
M2FA
250 SA
250 MA
280 SA
280 SMA
1469
1470
1474
1474
92.9
93.2
92.8
93.2
0.84
0.85
0.85
0.86
152
178
217
255
1474
1474
1477
1478
92.6
93.0
93.1
93.8
0.81
0.82
0.82
0.83
142
168
206
239
0.6
0.72
1.15
1.4
370
385
445
490
80
76
81
81
M2FA
M2FA
M2FA
M2FA
315 SA
315 SMA
315 MB
315 LA
1481
1480
1479
1475
94.5
94.6
94.7
94.5
0.85
0.85
0.86
0.85
306
379
470
596
1481
1483
1482
1473
94.6
94.8
94.9
93.5
0.84
0.82
0.83
0.86
283
360
441
540
2
2.3
2.9
3.5
680
735
850
970
86
86
86
87
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
355 SA
355 SB
355 SC
355 MA
355 LA
355 LKD
1482
1484
1482
1483
1484
94.8
95.3
95.2
95.3
95.3
0.86
0.84
0.85
0.85
0.84
584
670
746
835
949
1485
1485
1483
1484
1486
95.0
95.4
95.1
95.4
95.4
0.83
0.83
0.84
0.83
0.83
541
622
685
798
880
5.5
5.5
5.5
6.5
7.8
9.8
1220
1220
1220
1350
1550
1820
89
89
89
89
89
4)
4)
380 V 50 Hz
1468
1478
M2FA 250 MB
M2FA 280 MB
2700
2700
4)
110
160
1)
415 V 50 Hz
Moment of
Sound
inertia
pressure
J = GD2 Weight level LP
kgm2
kg
dB(A)
92.5
93.9
415 V 50 Hz
0.85
0.84
215
310
1472
1481
92.8
94.0
High-output design
0.82
0.81
206
298
0.91
1.7
430
550
81
87
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
155
Motor type
Product code
1)
1)
200
250
300
1)
55
75
90
110
132
150
185
1)
1)
1)
1)
90
Ts
Tmax
IN
Nm
TN
TN
Basic design
985
984
91.0
91.4
0.80
0.82
94
110
7.0
6.8
436
533
1.7
1.7
2.4
2.4
M2FA 280 SA
M2FA 280 SMA
987
987
92.8
93.1
0.76
0.76
155
187
5.8
6.1
725
870
1.9
2.0
2.2
2.3
M2FA
M2FA
M2FA
M2FA
3GFA
3GFA
3GFA
3GFA
313 110-A
313 210-A
313 320-A
313 510-A
988
988
988
987
93.5
94.0
94.1
94.4
0.81
0.83
0.82
0.83
210
248
300
346
7.4
7.6
8.2
8.5
1062
1275
1545
1788
1.7
1.8
1.9
1.9
2.6
2.7
2.8
2.9
990
990
990
94.7
94.8
95.1
0.82
0.83
0.81
373
457
541
7.1
7.3
7.2
1927
2409
2894
1.6
1.6
1.7
2.5
2.5
2.4
315 SA
315 SMA
315 MB
315 LA
M2FA 250 MB
M2FA 280 MB
400 V 50 Hz
3GFA 253 320-A
3GFA 283 320-A
984
987
92.0
93.6
High-output design
0.81
0.76
150
227
6.8
6.5
400 V 50 Hz
727
1063
1.8
2.1
2.5
2.3
Basic design
M2FA 250 SB
M2FA 250 MB
734
733
88.9
89.7
0.79
0.78
78
96
5.3
5.5
481
588
1.3
1.4
2.3
2.4
M2FA 280 SA
M2FA 280 SMA
738
738
91.2
91.8
0.78
0.76
117
161
5.6
6.1
711
970
1.2
1.4
2.0
2.1
739
739
739
92.9
93.4
93.3
0.79
0.78
0.78
183
224
268
6.8
7.3
7.2
1162
1420
1706
1.7
1.8
1.8
2.5
2.6
2.6
M2FA 355 SA
M2FA 355 SB
740
740
93.4
93.9
0.75
0.76
318
381
5.3
5.6
1934
2385
1.3
1.4
2.0
2.0
Torque
TN
Is
400 V 50 Hz
Current
IN
M2FA 250 SA
M2FA 250 MA
M2FA 355 SA
M2FA 355 SB
M2FA 355 MA
1)
Speed
r/min
Power
factor
cos
100%
M2FA 280 MB
400 V 50 Hz
3GFA 284 320-A
739
92.6
High-output design
0.75
192
6.7
1162
1.6
2.2
156
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Output
kW
Motor type
Speed
r/min
EfPower
ciency factor
%
cos
Current
IN
A
Speed
r/min
EfPower Current
ciency factor IN
%
cos A
380 V 50 Hz
45
55
M2FA 250 SA
M2FA 250 MA
983
983
90.8
91.3
0.83
0.85
95
112
983
983
91.0
91.4
0.8
0.82
92
107
1
1.2
370
385
2)
M2FA 280 SA
M2FA 280 SMA
985
986
92.7
92.9
0.79
0.79
158
190
986
987
92.7
93.1
0.79
0.78
146
178
1.65
2.6
440
475
2)
M2FA
M2FA
M2FA
M2FA
986
986
986
986
93.4
93.7
94.0
94.2
0.85
0.85
0.85
0.85
212
256
310
352
989
989
989
988
93.5
94.0
94.1
94.4
0.78
0.81
0.8
0.79
209
242
300
340
2.9
3.8
4.5
5.4
630
720
810
915
2)
989
989
988
94.5
94.7
94.9
0.84
0.84
0.85
385
478
546
990
991
991
94.7
94.8
95.1
0.81
0.81
0.82
364
446
528
8.7
10.2
12.5
1220
1320
1550
2)
75
90
110
132
160
185
1)
1)
200
250
300
315 SA
315 SMA
315 MB
315 LA
M2FA 355 SA
M2FA 355 SB
M2FA 355 MA
380 V 50 Hz
75
110
983
986
1)
1)
M2FA 250 MB
M2FA 280 MB
91.9
93.4
415 V 50 Hz
Moment of
Sound
inertia
pressure
J = GD2 Weight level LP
kgm2
kg
dB(A)
Basic design
415 V 50 Hz
0.84
0.79
150
231
983
988
92.0
93.6
2)
2)
2)
2)
2)
2)
2)
High-output design
0.81
0.77
146
219
430
545
2)
2)
380 V 50 Hz
37
45
M2FA 250 SB
M2FA 250 MB
732
731
88.5
89.3
0.81
0.80
80
98
735
734
88.9
89.7
0.77
0.76
76
94
1.2
1.5
385
430
2)
M2FA 280 SA
M2FA 280 SMA
736
736
89.9
91.7
0.81
0.79
119
161
739
739
91.2
91.8
0.77
0.75
114
157
1.85
2.2
460
500
2)
738
738
737
92.7
93.2
93.1
0.80
0.80
0.80
186
233
275
740
740
740
92.9
93.4
93.3
0.76
0.76
0.76
179
219
262
3.8
4.5
5.4
720
810
915
2)
M2FA 355 SA
M2FA 355 SB
739
739
93.3
93.7
0.77
0.78
322
393
741
741
93.4
93.9
0.73
0.74
311
372
8.7
10.2
1220
1320
2)
55
75
90
110
132
150
185
1)
1)
1)
1)
380 V 50 Hz
90
738
1)
M2FA 280 MB
92.5
415 V 50 Hz
1.5
2.9
Basic design
415 V 50 Hz
0.78
192
740
92.6
2)
2)
2)
2)
2)
High-output design
0.74
188
2.9
575
2)
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
157
Output Motor
kW
type
Product
code
Current
IN
Is
Torque
TN
Ts
Tmax
IN
Nm
TN
TN
Speed
r/min
Efciency
%
Power
factor
cos
1476/987
1478/989
1477/984
1480/987
1482/988
1484/989
1486/988
1486/989
1487/990
1488/989
1487/992
90.5/82.7
91.2/85.1
90.6/84.9
91.0/86.3
92.3/87.4
92.6/89.2
93.4/89.7
93.9/90.8
94.5/91.8
95.0/92.0
94.9/92.1
0.83/0.74
0.84/0.70
0.85/0.78
0.85/0.76
0.84/0.77
0.85/0.79
0.83/0.78
0.83/0.76
0.83/0.78
0.82/0.79
0.88/0.78
111/40
119/43
140/53
168/65
204/69
239/84
310/103
362/130
473/171
620/199
680/240
6.0/6.8
6.5/7.8
6.2/6.5
6.7/7.2
7.4/7.3
6.3/6.4
7.3/6.3
7.7/7.4
6.3/7.0
7.0/6.5
7.0/8.8
1477/734
1478/734
1478/734
1478/735
1479/735
1485/740
1483/738
1485/739
1486/740
1489/741
90.2/83.6
90.9/85.0
91.5/86.4
92.0/87.6
92.4/88.3
93.5/89.9
93.7/90.5
94.2/91.2
94.7/92.2
95.1/93.0
0.82/0.65
0.82/0.66
0.83/0.66
0.85/0.68
0.86/0.68
0.83/0.64
0.85/0.67
0.83/0.64
0.86/0.66
0.84/0.64
108/37
129/45
167/55
185/62
199/67
259/87
333/110
397/136
440/148
560/195
5.9/4.1
6.3/4.1
6.7/4.2
6.2/4.1
6.7/4.1
6.8/4.7
6.5/4.2
7.6/4.6
6.3/4.0
8.0/5.0
1480/984
1479/984
1480/983
1480/984
1481/987
1486/988
1488/989
1486/988
1487/991
1489/991
89.2/86.3
89.9/87.9
89.8/88.2
89.6/87.9
91.0/89.3
91.8/91.2
92.6/91.8
93.4/92.2
93.5/92.9
94.1/93.4
0.81/0.71
0.84/0.73
0.84/0.76
0.86/0.77
0.86/0.73
0.85/0.75
0.82/0.75
0.83/0.73
0.88/0.83
0.84/0.84
89/71
96/72
125/92
140/105
169/131
225/171
285/215
345/265
360/248
439/289
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
250 SA
250 MA
250 MB
280 SMA
280 MB
315 SMA
315 MB
315 LA
355 SA
355 MA
355 LA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
258 114258 314258 324288 214288 324318 214318 324318 514358 114358 314358 514-
55/14
67/17
88/22
100/25
110/28
140/35
185/46
220/55
250/63
315/80
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
250 SA
250 MA
250 MB
280 SMA
280 MB
315 SMA
315 MB
315 LA
355 MA
355 LA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
258 119258 319258 329288 219288 329318 219318 329318 519358 319358 519-
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
250 SA
250 MA
250 MB
280 SMA
280 MB
315 SMA
315 MB
315 LA
355 SA
355 MA
355 LA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
259 114259 314259 324289 214289 324319 214319 324319 514359 114359 314359 514-
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
250 SA
250 MA
250 MB
280 SMA
280 MB
315 SMA
315 MB
315 LA
355 MA
355 LA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
259 119259 319259 329289 219289 329319 219319 329319 519359 319359 519-
1.5/2.4
1.6/2.8
1.6/2.3
1.7/2.6
2.1/2.7
1.5/2.1
1.8/2.3
2.0/2.8
1.4/2.3
1.5/2.1
1.3/2.3
2.4/2.7
2.5/3.2
2.4/2.4
2.7/2.4
2.8/2.7
2.4/2.4
2.8/2.3
2.9/2.7
2.4/2.4
2.7/2.3
2.4/3.0
0.6
0.72
0.91
1.4
1.7
2.3
2.9
3.5
5.5
6.5
7.8
370
385
430
490
550
735
850
970
1220
1320
1550
356/182
433/221
569/286
646/325
710/364
900/452
1191/595
1415/711
1607/813
2020/1031
1.4/1.4
1.5/1.5
1.7/1.5
1.5/1.5
1.7/1.5
1.5/1.6
1.5/1.4
1.7/1.5
1.1/1.0
1.7/1.4
2.3/1.9
2.3/1.9
2.5/1.9
2.4/1.7
2.4/1.7
2.6/1.9
2.4/1.7
2.8/2.0
2.3/1.7
2.9/2.0
0.6
0.72
0.91
1.4
1.7
2.3
2.9
3.5
6.5
7.8
370
385
430
490
550
735
850
975
1320
1550
356/155
407/179
485/243
581/290
709/309
849/386
1092/483
1285/608
1670/820
2182/966
2569/1155
Moment of
inertia
J = GD2 Weight
kgm2
kg
6.8/6.2
6.3/6.4
6.6/6.5
6.2/6.3
6.8/6.9
6.3/6.2
7.6/6.6
7.8/6.8
7.8/9.0
8.6/8.8
290/291
323/311
419/418
484/485
580/581
771/773
986/966
1189/1208
1284/1253
1539/1542
1.7/2.4
1.5/2.5
1.7/2.5
1.5/2.4
1.7/2.7
1.5/2.3
1.8/2.5
1.9/2.8
1.2/2.3
1.6/2.4
2.6/2.5
2.4/2.5
2.5/2.4
2.3/2.4
2.5/2.6
2.5/2.3
2.9/2.5
2.9/2.5
3.0/3.2
3.4/2.8
0.6
0.72
0.91
1.4
1.7
2.3
2.9
3.5
8.5
10.2
370
385
430
490
550
735
850
970
1220
1320
88.7/86.8
89.2/87.6
89.8/88.5
91.2/89.9
91.2/90.6
92.0/91.6
92.4/91.9
92.8/92.2
93.6/91.8
94.0/92.5
0.86/0.63
0.86/0.66
0.87/0.65
0.84/0.65
0.87/0.70
0.88/0.75
0.88/0.75
0.88/0.75
0.91/0.73
0.88/0.68
92/68
109/86
126/94
159/119
183/125
220/164
262/194
325/247
386/271
512/368
5.9/5.7
6.2/5.8
6.5/6.1
5.5/5.4
5.4/5.5
6.0/5.8
6.1/5.7
6.5/5.9
6.7/6.2
8.1/7.1
310/336
375/439
445/490
548/619
646/710
806/1034
967/1228
1192/1551
1446/1607
1924/2054
1.7/2.8
1.8/2.9
2.0/3.0
1.5/2.7
1.6/2.5
1.3/1.8
1.4/1.8
1.5/1.9
1.1/1.6
1.5/2.0
2.3/2.4
2.4/2.3
2.5/2.0
2.2/2.3
2.1/2.2
2.1/2.0
2.1/2.0
2.2/2.0
2.4/2.5
2.8/2.9
1.0
1.2
1.5
2.6
2.9
4.1
4.9
5.8
10.2
12.5
370
385
430
475
545
755
845
950
1320
1550
158
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Variant
Motor size
250
280
315
355
400
Balancing
052
417
037
043
SPM nipples.
058
107
420
035
Coupling
Drain holes
066
Element capacity:
50 W
2 x 50 W
2 x 65 W
450
451
Insulation system
014
009
IM 2001 foot/ange mounted, IEC ange, from IM 1001 (B35 from B3).
114
005
072
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Painting
Protection
002
095
135
161
1)
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
159
Code 1)
Variant
355
400
P
P
P
P
P
P
P
P
P
P
069
070
121
122
M
M
123
125
Bimetal detectors, break type (NCC), (2x3 in series), 150C, in stator winding.
127
435
436
437
439
441
442
445
446
Terminal box
015
017
022
Testing
145
146
Type test with report for motor from specic delivery batch.
147
148
149
153
760
761
762
763
1)
160
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B8 (IM 1071), IM V5 (IM 1011)
Terminal box top-mounted
Motor size
Poles
AA
AB
AC
BA
BB
DB
EG
250 SA
250 SA,SB
250 MA
250 MA
250 MB
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA, LB
315 LA, LB
2
4-8
2
4-6
4-8
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
406
406
406
406
406
457
457
457
457
457
508
508
508
508
508
508
508
508
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
470
470
470
470
470
545
545
545
545
545
622
622
622
622
622
622
622
622
497
497
497
497
497
555
555
555
555
555
624
624
624
624
624
624
624
624
311
311
349
349
349
368
368
368
419
419
406
406
406
406
457
457
508
508
419
419
457
457
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
368
368
406
406
406
450
501
501
501
501
535
535
540
540
540
540
592
592
168
168
168
168
168
190
190
190
190
190
216
216
216
216
216
216
216
216
65
75
65
75
75
80
65
80
65
80
70
90
70
90
70
90
70
90
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
170
140
170
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
48
40
48
Motor size
Poles
GA
GD
HA
HC
HD
LD
250 SA
250 SA,SB
250 MA
250 MA
250 MB
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA, LB
315 LA, LB
2
4-8
2
4-6
4-8
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
18
20
18
20
20
22
18
22
18
22
20
25
20
25
20
25
20
25
58
67.5
58
67.5
67.5
71
58
71
58
71
62.5
81
62.5
81
62.5
81
62.5
81
69
79.5
69
79.5
79.5
85
69
85
69
85
74.5
95
74.5
95
74.5
95
74.5
95
11
12
11
12
12
14
11
14
11
14
12
14
12
14
12
14
12
14
250
250
250
250
250
280
280
280
280
280
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
496
496
496
496
496
556
556
556
556
556
625
625
625
625
625
625
625
625
672
672
672
672
672
730
730
730
730
730
820
820
820
820
820
820
820
848
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
953
953
953
953
1023
1020
1060
1090
1120
1150
1123
1153
1223
1153
1223
1253
1293
1323
381
381
381
381
381
415
385
415
385
415
392
422
392
422
392
422
392
422
Tolerances:
A,B
D
F
ISO js 14
ISO m6
ISO h9
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
161
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B8 (IM 1071), IM V5 (IM 1011)
Terminal box top-mounted
Motor size
Poles
AA
AB
AC
BA
BB
BC
DB
EG
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
610
610
610
610
610
610
610
610
610
610
610
610
686
686
110
110
110
110
110
110
110
110
110
110
110
110
140
140
714
714
714
714
714
714
714
714
714
714
714
714
820
820
716
716
716
716
716
716
716
716
716
716
716
716
810
810
500
500
500
500
560
560
560
630
630
630
630
630
710
710
710
710
800
800
100
100
100
100
100
100
100
100
100
100
100
100
140
140
584
584
584
584
644
644
644
714
714
714
802
802
935
935
180
180
220
220
254
254
254
254
254
254
254
254
254
254
254
254
280
280
75
100
100
100
75
100
100
75
100
100
75
100
90
100
M20
M24
M24
M24
M20
M24
M24
M20
M24
M24
M20
M24
M24
M24
140
210
210
210
140
210
210
140
210
210
140
210
170
210
40
48
48
48
40
48
48
40
48
48
40
48
48
48
Motor size
Poles
GA
GD
HA
HC
HD
LD
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
20
28
28
28
20
28
28
20
28
28
20
28
25
28
67.5
90
90
90
67.5
90
90
67.5
90
90
67.5
90
81
90
79.5
106
106
106
79.5
106
106
79.5
106
106
79.5
106
95
106
12
16
16
16
12
16
16
12
16
16
12
16
14
16
355
355
355
355
355
355
355
355
355
355
355
355
400
400
36
36
36
36
36
36
36
36
36
36
36
36
45
45
713
713
713
713
713
713
713
713
713
713
713
713
805
805
920
892
920
892
920
920
892
920
920
892
920
920
1003
1003
28
28
28
28
28
28
28
28
28
28
28
28
35
35
1310
1380
1380
1380
1370
1440
1440
1450
1520
1520
1590
1660
1786
1826
397
467
467
467
397
467
467
397
467
467
397
467
438
478
Tolerances:
A,B
D
F
H
162
ISO js 14
ISO m6
ISO h9
0, -1.0
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
Dimension drawings
Flange-mounted; IM B5 (IM 3001), IM V1 (IM 3011)
Motor size
Poles
AC
DB
EG
GA
GD
HB
250 SA
250 SA,SB
250 MA
250 MA
250 MB
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA
315 LA
315 LB
2
4-8
2
4-6
4-8
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
2
493
493
493
493
493
551
551
551
551
551
620
620
620
620
620
620
620
620
620
65
75
65
75
75
80
65
80
80
80
70
90
70
90
70
90
70
90
70
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M20
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
170
140
170
140
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
48
40
48
10
18
20
18
20
20
22
18
22
18
22
20
25
20
25
20
25
20
25
20
58
67.5
58
67.5
67.5
71
58
71
58
71
62.5
81
62.5
81
62.5
81
62.5
81
62.5
69
79.5
69
79.5
79.5
85
69
85
69
85
74.5
95
74.5
95
74.5
95
74.5
95
74.5
11
12
11
12
12
14
11
14
11
14
12
14
12
14
12
14
12
14
12
422
422
422
422
422
450
450
450
450
450
505
505
505
505
505
505
505
505
533
Motor size
Poles
LA
LB
LD
250 SA
250 SA,SB
250 MA
250 MA
250 MB
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA
315 LA
315 LB
2
4-8
2
4-6
4-8
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
2
953
953
953
953
1023
1020
1060
1090
1120
1150
1123
1153
1223
1153
1223
1253
1293
1323
1293
22
22
22
22
22
25
25
25
25
25
25
25
25
25
25
25
25
25
25
813
813
813
813
883
850
920
920
980
980
983
983
1083
983
1083
1083
1153
1153
1153
381
381
381
381
381
410
380
410
380
410
390
420
390
420
390
420
390
420
390
600
600
600
600
600
600
600
600
600
600
740
740
740
740
740
740
740
740
740
550
550
550
550
550
550
550
550
550
550
680
680
680
680
680
680
680
680
680
660
660
660
660
660
660
660
660
660
660
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Tolerances:
D
F
N
ISO m6
ISO h9
ISO js6
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
163
Dimension drawings
Flange-mounted; IM B5 (IM 3001), IM V1 (IM 3011)
Motor size
Poles
AC
DB
EG
GA
GD
HB
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
716
716
716
716
716
716
716
716
716
716
716
716
810
810
75
100
100
100
75
100
100
75
100
100
75
100
90
100
M20
M24
M24
M24
M20
M24
M24
M20
M24
M24
M20
M24
M24
M24
140
210
210
210
140
210
210
140
210
210
140
210
170
210
40
48
48
48
40
48
48
40
48
48
40
48
48
48
20
28
28
28
20
28
28
20
28
28
20
28
25
28
67.5
90
90
90
67.5
90
90
67.5
90
90
67.5
90
81
90
79.5
106
106
106
79.5
106
106
79.5
106
106
79.5
106
95
106
12
16
16
16
12
16
16
12
16
16
12
16
14
16
565
537
565
537
565
565
537
565
565
537
565
565
565
565
Motor size
Poles
LA
LB
LD
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
1310
1380
1380
1380
1370
1440
1440
1450
1520
1520
1590
1660
1786
1826
25
25
25
25
25
25
25
25
25
25
25
25
28
28
1170
1170
1170
1170
1230
1230
1230
1310
1310
1310
1450
1450
1616
1616
395
465
465
465
395
465
465
395
465
465
395
465
438
478
740
740
740
740
740
740
740
740
740
740
740
740
940
940
680
680
680
680
680
680
680
680
680
680
680
680
880
880
800
800
800
800
800
800
800
800
800
800
800
800
1000
1000
23
23
23
23
23
23
23
23
23
23
23
23
28
28
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Tolerances:
D
F
N
164
ISO m6
ISO h9
ISO js6
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
122/5
142/6
162/7, 162/10
162/4, 162/9 +
adapter
122/4
142/4
Motor size
A1
B1
H1
250 - 280
455
280
177
142/4
315 - 355
536
349
197
162/4, 162/9 +
Adapter
315 - 400
787
410
226
250 - 280
383
280
180
142/6
315 - 355
426
347
201
162/7, 162/10
315 - 400
508
412
226
Rating plate
The rating plate is in table form giving values for speed,
current and power factor for six voltages.
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
165
280
315
355
400
Stator
Material
Paint colour shade
Paint thickness
Material
Paint colour shade
Paint thickness
Bearings
D-end
2-pole
4-12 poles
6316/C4
6316/C3
6316/C4
6319/C3
6316/C4
6319/C4
on request
6322/C3
on request
6322/C3
N-end
2-pole
4-12 poles
6316/C4
6316/C3
6316/C4
6316/C3
6316/C4
6316/C3
on request
6319/C3
on request
6319/C3
Axially-locked bearings
250
Bearing seal
Lubrication
Rating plate
SPM-nipples
On request
Terminal box
Frame material
Cover material
Cover screw material
Connections
Cable
Terminals
2 x M63
2 x 50/80
2 x 80
2 x M63
2 x 60
2 x 60/80
6 terminals for connection with cable lugs (not included)
Fan
Material
Siluminium
Fan cover
Material
Paint colour shade
Paint thickness
Sheet steel
Blue, Munsell 8B 4.5/3.25 / NCS 4822-B05G / RAL 5014
Two-pack epoxypolyester paint, thickness 80 m
Stator winding
Material
Insulation
Copper
Insulation class F; temperature rise class B unless otherwise stated.
Winding protection
Material
Rotor winding
2 - 4 pole
6 pole
Balancing method
Key way
Heating elements
On request
50 W
50 W
2x50 W
Drain holes
Enclosure
IP 23S
Cooling method
IC 01
166
2x65 W
2x65 W
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof GB 12-2004
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
Features............................................... 168
Mechanical design.............................. 169
Ordering information .......................... 178
Technical data ..................................... 179
Variant codes ...................................... 183
Dimension drawings .......................... 187
Rating plates ....................................... 188
Global motors in brief ........................ 200
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
167
Global motors
Features
The global economy connects multinational companies
with engineering and production in many countries
around the world.
Once a motor is specied and put into use, production
equipment, including the motors, may need to move
from one country to another, Very often the new country
will have different voltage, efciency and safety label
requirements.
EPAct
CC number
Voltage
Motors covered by EPAct must have the EPAct compliance number stamped on the rating plate. The number
for all ABB low voltage motors is CC031A.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Mechanical design
Stator
Stator framework, bearing shields and feet are made
of an extra corrosion resistant aluminum alloy with low
copper content with the following exceptions:
Drain holes
Motors that will be operated in very humid or wet
environments and especially under intermittent duty
should be provided with drain holes. The appropriate IM
designation, such as IM 3031, is specied on the basis
of the method of mounting the motor.
Motors are provided with closable plastic plugs in the
drain holes (see diagram below). The plugs will be open
on delivery. When mounting the motors it should be ensured that the drain holes face downwards. In the case
of vertical mounting, the upper plug must be
hammered home completely. In very dusty environments both plugs should be hammered home.
Size 63 is supplied as standard with drain holes on Dend while sizes 71 to 280 are supplied with drain holes
both on D-end and N-end.
When mounting arrangement differs from foot mounted
IM B3, please mention variant code 066 when ordering.
See variant codes 065, 066 and 076 under the heading
Drain holes.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
169
Terminal box
Sizes 63 to 180
The terminal box is made of aluminum alloy and is
located on top of the stator. The lower part of the box is
integrated with the stator. It is provided with 2 knockout
openings on each side. Sizes 160-180 also have a third
smaller opening. Cable glands are not included.
Sizes 200 to 280
The terminal box and cover are made of deep drawn
steel and mounted on top of the stator. The box is bolted to the stator and is not rotatable. The size of the box
is the same for all motors.
In the basic design the terminal box is provided with
two FL 13 ange openings, one on each side. The opening on the right side, seen from the D-end, is supplied
with a ange with two holes for M40 cable glands. On
delivery the holes are sealed by means of plastic plugs.
Cable glands are not supplied. The opening on the
6
Terminal box size 160-180
Connections
The terminal block is provided with
6 terminals for connecting Cu-cable.
The terminals are marked in
accordance with IEC 60034-8.
170
Connection openings
Motor
size
Opening
63
Knock-out opening
71-80
Knock-out opening
90-100
112-132
160-180
200-250 1)
280
Knock-out opening
Knock-out opening
Knock-out opening
2 x FL 13
2 x FL 21
Metric
cable entry
Method of
connection
Terminal
bolt size
Maximum
connectable
Cu-cable
area, mm2
1 x M16 x 1.5
1 x Pg 11
2 x M20 x 1.5
2 x Pg 16
2 x (M25 + M20)
2 x (M25 + M20)
2 x (2 x M40 + M16)
1 x (2 x M40 + M16)
1 x (2 x M63 + M16)
Screw terminal
M4
2.5
Screw terminal
M4
Screw terminal
Cable lug
Cable lug
Cable lug
Cable lug
M4
M5
M6
M10
M10
6
10
35
70
70
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Bearings
The motors are provided with bearings according to the
tables below.
Alternative designs:
Version with roller bearings
63
71
80
90
100
112 2)
112 2)
132 2)
132 2)
160
180
200
225
250
280
280
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6306-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6208-2Z/C3
6309-2Z/C3
6310-2Z/C3
6312/C3
6313/C3
6315/C3
6315/C3
6316/C3
2)
short:
long:
short
long
short
long
2-pole
4-pole
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6205-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6209-2Z/C3
6209-2Z/C3
6210/C3
6212/C3
6213/C3
6213/C3
6213/C3
D-end
N-end
90
100
160
180
200
225
250
280
280
NU 205
NU 306
NU 309 ECP
NU 310 ECP
NU 312 ECP
NU 313 ECP
NU 315 ECP
NU 315 ECP
NU 316 ECP
2-pole
4-pole
D-end
058
N-end
059
90
100
112 1)
112 1)
132 1)
132 1)
160
180
200
225
250
280
280
7205 B
7306 B
7206 BE
7206 BE
7208 BE
7208 BE
7309 BE
7310 BE
7312 BE
7313 BE
7315 BE
7315 BE
7316 BE
7204 B
7205 B
7205 BE
7206 BE
7206 BE
7208 BE
7209 BE
7209 BE
7210 BE
7212 BE
7213 BE
7213 BE
7213 BE
1)
short:
long:
short
long
short
long
2-pole
4-pole
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
171
Transport locking
Motors provided with roller bearings or angular contact
ball bearings are tted with a transport lock to prevent
damage to the bearings, due to vibration, during
transport.
Axially-locked bearings
The table below shows which of the motors bearings
are axially locked in the bearing seat. In motor sizes 56
to 80 the locking is done by an inner bearing circlip, in
motor sizes 90 to 280 by an inner bearing cover.
1)
Flange-mounted motors
Motor
size
Foot-mounted
motors
Large ange
Small ange
63
71-80
90-100
112-132
160-280
On request at D-end
On request at D-end
D-end 1)
D-end 1)
D-end
On request at D-end
D-end
D-end 1)
D-end
D-end
On request at D-end
On request at D-end
D-end 1)
D-end
Lubrication
172
Lubrication intervals and grease quantities are specied on a plate on the motor as well as in the manual
supplied with the motor.
The grease lifetime L10, suitable for permanent lubricated bearings, is dened as the number of operating
hours after which 90 per cent of the bearings are adequately lubricated. 50 per cent of the bearings achieve
two times this gure. Maximum lifetime, however,
should be regarded as 40000 hours.
In case of high ambient temperatures the shaft loads
must be reduced compared to permissible loadings in
the table (see pages 174 to 177), please contact ABB.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Table 1: Grease lifetime L10 in deep groove ball bearings of type 2Z in horizontally mounted motors in continuous running duty.
Ambient temperature and rated output
50 C
60 C
70 C
Basic
High
Basic
High
Basic
High
Motor
r/min
63
3000
1500
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
80 C
Basic
High
27000
40000
37000
71
3000
1500
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
3000
1500
30000
24000
80
40000
40000
40000
40000
40000
40000
40000
40000
40000
19000
29000
40000
40000
40000
40000
40000
40000
24000
90
3000
1500
19000
24000
15000
40000
3000
1500
40000
40000
40000
40000
33000
40000
35000
21000
27000
33000
14000
100
112
3000
1500
40000
40000
40000
40000
40000
40000
132
3000
1500
40000
40000
40000
160
3000
1500
40000
40000
40000
38000
38000
180
3000
1500
40000
40000
25 C
Basic
High
40000
40 C
Basic
High
24000
30000
30000
40000
40000
26000
27000
22000
40000
17000
21000
23000
22000
31000
26000
40000
14000
37000
9000
40000
17000
25000
34000
38000
34000
29000
20000
20000
28000
15000
40000
40000
17000
40000
40000
27000
37000
35000
40000
10000
15000
8000
In vertically mounted motors, the grease lifetime is half the gures above.
For applications corresponding to the empty cells in the table, please contact ABB. These applications can imply reduced lifetime for bearings and winding.
Motors with roller bearings (optional) have considerably shorter grease life. For continuous operation regreasing nipples should be considered.
Lubrication intervals
ABB follows the L1-principle in dening lubrication interval. That means
that 99% of the motors are sure to
make the interval time. The lubrication intervals can also be calculated
according to the L10-principle, which
are normally doubled compared to
motors (B3), with about 80C bearing temperature and using good
quality grease with lithium complex
soap and with mineral or PAO-oil.
For more information, see ABBs
Low Voltage Motors Manual.
Frame Amount
size
of
grease
g
3600
3000
1800
1500
r/min
r/min
r/min
r/min
Ball bearings:
180
200
225
250
280
280
6000
4000
3000
2500
2000
-
180
200
225
250
280
280
30
40
50
60
35
70
8000
6000
5000
4000
3500
-
13500
11000
10000
9000
8000
16000
13000
12500
11500
10500
Frame Amount
size
of
grease
g
30
40
50
60
35
70
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
3600
3000
1800
1500
r/min
r/min
r/min
r/min
3000
2000
1500
1300
1000
-
4000
3000
2500
2200
1800
-
7000
5500
5000
4500
4000
8000
6500
6000
5700
5300
173
where:
D
=
P
=
n
=
K
=
FR
diameter of pulley, mm
power requirement, kW
motor speed, r/min.
belt tension factor, dependent on belt type and
type of duty. A common value for V-belts is
K = 2.5
= permissible radial force according to the tables
Bearing life
The nominal life is dened as the number of hours that
are attained or exceeded by 90% of identical bearings,
in a large test series, under certain specied conditions.
50% of the bearings attain a life of as much as 5 times
this gure.
The life of bearings is dependent on various factors
such as bearing load, motor speed, operating temperature and the purity of the grease. The permissible radial
and axial loading for different motor sizes is shown in
the table on the following pages.
50 Hz
60 Hz
25,000
21,000
40,000
33,000
63,000
52,000
80,000
67,000
Motor
size
63
90
X (F - F )
FR = FX0 - E
X0
Xmax
E = length of shaft extension in basic version.
174
71
80
1001)
1)
Length
of shaft
No. of extension
poles E (mm)
2
4
2
4
2
4
2
4
2
4
490
490
680
680
630
930
1010
1010
2280
2280
23
23
30
30
40
40
50
50
60
60
400
400
570
570
750
750
810
810
1800
1800
490
490
680
680
930
930
1010
1010
2280
2280
400
400
570
570
750
750
810
810
1800
1800
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Ball bearings
Basic design with deep
groove ball bearings
Alternative design
with 63-series bearings
Roller bearings
Alternative design
with roller bearings
25,000 hrs
25,000 hrs
Motor
size
No. of
poles
Length
40,000 hrs
of shaft 25,000 hrs
extention
E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
112 M
60
1800
1420
1620
1280
2160
1700
2160
1700
60
1790
1410
1590
1250
2160
1700
2160
1700
132 SA
80
3020
2360
2740
2140
4070
3180
3670
2870
132 SB
80
3020
2360
2730
2130
4060
3170
3670
2870
40,000 hrs
FX0 (N)
FXmax(N)
40,000 hrs
FX0 (N)
FXmax(N)
132 S
80
3120
2440
2790
2180
4090
3200
3830
2990
132 M
80
3080
2410
2750
2150
4100
3200
3780
2950
160 MA
110
4470
3500
4470
3500
4470
3500
4470
3500
160 M
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
6900
5550
6360
5110
7338
5900
7340
5900
110
7100
5710
6470
5200
7338
5900
7340
5900
160 L
180 M
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
175
Ball bearings
Basic design with deep
groove ball bearings
Roller bearings
Alternative design
with roller bearings
Motor
size
Length
of shaft 25,000 hrs
40,000 hrs
25,000 hrs
40,000 hrs
No. of extention
poles E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
180 L
110
7050
5670
6410
5150
7340
5900
7340
5900
200 MLB
110
4930
4060
4360
3590
9460
7790
9460
7790
110
5290
4360
4630
3810
9460
7790
9460
7790
200 MLC
110
4920
4050
4360
3590
9460
7790
9460
7790
225 SMB
140
5750
4870
5030
4260
9810
8300
9810
8300
225 SMC
110
5370
4510
4750
3990
10600
8900
10600
8900
140
5720
4840
5000
4230
9810
8300
9810
8300
140
6960
5610
6150
4960
11290
9100
11290
9100
250 SMB
140
7620
6140
6680
5380
14330
11550
14330
11550
250 SMC
140
6960
5610
6150
4960
11290
9100
11290
9100
280 SMB
140
7510
6100
6590
5350
17850
14500
16060
13050
280 SMC
140
7510
6100
6590
5350
17850
14500
16060
13050
176
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Mounting arrangement IM V1
Mounting arrangement IM B3
FAZ
FAD
AD
FAD
F
FAZ
Motor
size
20,000 hours
2-pole
4-pole
FAD
FAZ
FAD
FAZ
N
N
N
N
40,000 hours
2-pole
4-pole
FAD
FAZ
FAD
FAZ
N
N
N
N
63
71
80
90
100
112 M
132 SA
132 SB
132 S
132 M
132 MA
160 MA
160 M
160 L
180 M
180 L
200 MLB
200 MLC
225 SMB
225 SMC
250 SMB
250 SMC
280 SMB
280 SMC
790
985
1305
1360
2805
1500
2570
2570
4730
4730
5240
4660
3050
3050
3440
3440
4180
4180
5000
5000
720
900
1185
1225
2540
1320
2260
2260
4220
4220
4650
4250
2430
2430
2730
2730
3320
3320
4400
4400
390
485
705
930
1945
1500
2570
2570
4730
4730
5240
4660
3050
3050
3440
3440
4180
4180
5000
5000
865
1070
1420
1490
3075
1600
2770
2750
5230
5220
4950
4870
3850
4340
4340
5260
5260
6100
6100
465
570
820
1070
2215
1600
2770
2750
5230
5220
4950
4870
3850
4340
4340
5260
5260
6100
6100
320
400
585
800
1680
1320
2260
2260
4220
4220
4650
4250
2430
2430
2730
2730
3320
3320
4400
4400
780
970
1285
1335
2760
1390
2440
2420
4640
4630
4500
4390
3050
3440
3440
4180
4180
5300
5300
380
470
685
915
1900
1390
2440
2420
4640
4630
4500
4390
3050
3440
3440
4180
4180
5300
5300
Motor
size
20,000 hours
2-pole
4-pole
FAD
FAZ FAD
FAZ
N
N
N
N
40,000 hours
2-pole
4-pole
FAD
FAZ
FAD
FAZ
N
N
N
N
63
71
80
90
100
112 M
132 SA
132 SB
132 S
132 M
132 MA
160 MA
160 M
160 L
180 M
180 L
200 MLB
200 MLC
225 SMB
225 SMC
250 SMB
250 SMC
280 SMB
280 SMC
790
998
1320
1390
2855
2290
3550
3560
4940
4960
5520
4990
3600
3600
4140
4140
5020
5020
5950
5950
725
910
1200
1255
3320
2680
4160
4180
5540
5420
5770
5280
5280
6030
6030
7440
7440
-
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
380
470
685
900
1890
2170
3370
3360
4520
4500
4960
4330
2500
2500
2740
2740
3330
3330
4050
4050
875
1085
1445
1525
3135
2490
3910
3910
5500
5560
5400
5390
4580
5230
5230
6380
6380
7380
7380
455
555
790
1035
2155
2330
3630
3590
4960
4880
4500
4350
3120
3440
3440
4150
4150
5010
5010
310
385
565
770
2340
2510
3880
3850
4900
4680
4630
3530
3530
3900
3900
4610
4610
-
790
985
1310
1370
3420
2770
4320
4330
5520
5540
5170
5930
5720
6530
6530
8050
8050
-
370
455
655
880
2425
2590
3990
3930
4960
4900
4280
4810
3980
4400
4400
5210
5210
-
177
Ordering information
Type designation
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
Motor size
A
D, E, F
A
B
C
D
E
F
M3AA 112 M
4
IM B3 (IM 1001)
4 kW
112022-ADC
Motor type
Motor size
Product code
Code for mounting
arrangement
Voltage and frequency code
Generation code
followed by variant codes
Position 7
Pole pairs
1 = 2 poles
2 = 4 poles
Position 4
Type of rotor
A = Squirrel cage rotor
Positions 8 to 10
Running number
Position 11
- (dash)
Positions 5 and 6
IEC size
06
07
08
09
10
11
13
=
=
=
=
=
=
=
63
71
80
90
100
112
132
16 =
18 =
20 =
22 =
25 =
28 =
160
180
200
225
250
280
Position 12
Mounting arrangement
A = Foot-mounted motor
B = Flange-mounted motor.
Large ange with clearance holes.
Flange motors come without CC-number in
the rating plate due to American legislation.
H = Foot- and ange-mounted motor.
Large ange with clearance holes.
Must be ordered using variant code 009.
Position 13
Voltage and frequency: See tables below
Position 14
Version A,B,C, CG2... =
Generation code followed by variant codes
6
The bullets in the product code description:
Voltage and frequency code
Frame sizes
63-100
112-132
S
200-240 VD 50 Hz
380-420 VY 50 Hz
440-480 VY 60 Hz
D
380-420 VD 50 Hz
440-480 VD 60 Hz
660-690 VY 50 Hz
Frame sizes
160-280
D
380 VD 50 Hz
400 VD 50 Hz
415 VD 50 Hz
660 VY 50 Hz
690 VY 50 Hz
460 VD 60 Hz
178
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Motor type
Product code
kW
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
75
1)
2)
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71B
80 A
80 C
90 L
90 LB
100 LB
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
200 MLB
200 MLC
225 SMC
250 SMB
250 SMC
280 SMC
Speed Efciency
Power
Current
Torque
r/min
factor
cos
IN
Is
Nm
IN
0.64
0.71
0.72
0.76
0.81
0.88
0.87
0.87
0.86
0.93
0.88
0.9
0.9
0.9
0.89
0.91
0.9
0.89
0.88
0.91
0.93
0.93
0.56
0.66
1.00
1.35
1.7
2.20
3.00
4.40
5.90
7.1
10.3
13.3
19.2
26
32.5
37.5
52
64
78
93
124
124
4.2
4.5
5.5
5.7
7.1
8
7.7
7.4
10
7.5
9.9
11
7.4
8
8.3
7.1
7.9
8.8
6.9
7.5
7.7
7.7
acc. to IEC
100% 75%
Ts
Moment Weight
lbs
TN
Tmax of inertia kg
kgm2
TN
3.5
3.6
3.8
3.6
4.5
4.6
2.7
3.0
3.9
2.6
4
5.1
2.7
3
3.1
2.7
3
3.6
2.3
2.5
2.3
2.3
3.1
3.3
3.9
3.7
3.7
3.8
3.6
3.6
4.9
3.4
4.5
5.2
2.9
3.3
3.3
2.9
2.9
3.3
2.9
3
2.8
2.8
8.6
9.7
12
14
20
25
35
40
55
139
152
152
151.8
152
152
154
158.4
158.4
162.8
165
165
165
Sound
pressure
level Lp
dB(A)
400 V 50 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
061 391-
061 392-
071 391-
071 392-
081 731-
081 773-
091 312-
091 313-
101 312-
111 022-CG2
131 023-CG2
131 024-CG2
161 121-CG2
161 122-CG2
161 123-CG2
181 121-CG2
201 021-CG2
201 022-CG2
221 021-CG2
251 021-CG2
251 022-CG2
281 021-CG2
2820
2810
2840
2830
2860
2860
2900
2880
2920
2860
2900
2915
2935
2940
2935
2945
2950
2960
2970
2970
2965
2965
73.7
77.5
77.1
79.2
79.2
82.5
85.9
85.8
87.6
87.7
88.6
90.9
91.5
92.3
93.1
93.2
93
93.9
94.4
94.1
94.8
94.8
70.6
75.8
76.5
78.2
78.6
82.7
86.5
87.1
87.5
89.4
88.9
91.3
91.9
92.7
93.6
93.8
93.3
94.1
94.4
94.1
95
95
0.62
0.87
1.25
1.86
2.5
3.7
5.0
7.3
9.9
13.4
18.1
24.6
36
49
60
71
97
120
145
177
242
242
0.00013
0.00016
0.00040
0.00045
0.000720
0.001090
0.0024
0.0027
0.0005
0.012
0.016
0.022
0.047
0.053
0.058
0.092
0.18
0.19
0.29
0.57
0.59
0.6
3.9
4.4
5.5
6.5
9
12
16
18
25
33
42
56
84
94
100
137
200
205
260
330
345
390
63
69
69
69
69
69
70
72
72
74
75
75
75
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
179
Motor type
Product code
kW
0.16
0.25
0.35
0.50
0.75
1
1.5
2
3
4
5
7.5
10
15
20
25
30
40
50
60
75
75
100
100
0.12
0.18
0.25
0.37
0.55
0.75
1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
55
75
75
1)
2)
2)
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71 B
80 A
80 C
90 L
100 LA
100 LC
100LB
112 M
132 S
132 M
160 M
160 L
180 M
180 L
200 MLB
225 SMB
225 SMC
225 SMD
250 SMB
250 SMC
280 SMB
Speed Efciency
Power
Current
Torque
r/min
factor
cos
IN
Is
Nm
IN
0.59
0.64
0.71
0.69
0.76
0.82
0.80
0.82
0.77
0.84
0.76
0.84
0.87
0.83
0.83
0.84
0.84
0.84
0.85
0.86
0.86
0.87
0.85
0.85
0.46
0.63
0.74
1.05
1.40
1.60
2.40
3.20
4.80
5.90
8.6
10.6
14
21
28.5
34
41
55
68
80
98
96
135
135
3.1
3.1
4.3
4.4
4.6
5.6
6.1
6.9
8.5
7.6
8.5
7
7.8
8.1
7.6
6.6
7.8
8
8.1
8
8.5
7.4
8.4
8.4
acc. to IEC
100% 75%
Ts
Moment Weight
lbs
TN
Tmax of inertia kg
kgm2
TN
2.6
2.5
2.7
2.6
2.6
4
2.9
2.8
4.0
3.3
3.3
2.2
2.2
3.4
3.3
2.7
3.1
4
3.9
3.8
4.3
3
3.4
3.4
2.6
2.6
2.9
2.8
2.9
2.6
3.4
3.4
4.6
3.8
4.3
2.8
3.1
3.3
3.1
2.8
3.4
3.1
2.9
3.2
3.8
3.1
5.1
5.1
8.8
9.9
12
14
20
24
35
46
55
55
75
106
130
207
227
310
354
451
506
583
638
737
792
891
Sound
pressure
level Lp
dB(A)
400 V 50 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
062 391-
062 392-
072 391-
072 392-
082 391-
082 733-
092 312-
102 311-
102 313-
102 342-
112 022-CG2
132 023-CG2
132 024-CG2
162 121-CG2
162 122-CG2
182 121-CG2
182 122-CG2
202 021-CG2
222 021-CG2
222 022-CG2
222 023-CG2
252 021-CG2
252 022-CG2
282 021-CG2
1400
1380
1410
1420
1390
1380
1420
1440
1450
1450
1455
1460
1450
1470
1460
1470
1475
1475
1480
1480
1480
1480
1480
1480
63.7
65.6
70.4
74.6
75.3
82.5
83.9
85.6
86.8
85.5
88.3
89.3
90.3
91.5
91.3
92.5
93.2
93.7
93.7
94.4
94.5
94.5
95.2
95.2
58.4
62.1
69.1
72.1
73.1
83.2
84.3
85.5
86.6
85.5
88.6
90.5
91
92.1
92.1
93.4
93.9
94.3
94
94.8
94.8
94.9
95.6
95.6
0.82
1.25
1.71
2.51
3.75
5.2
7.4
10
14.5
17.2
26.3
36.2
49
72
98
121
143
194
239
291
355
356
484
484
0.00019
0.00026
0.00066
0.00089
0.001250
0.001940
0.0043
0.0069
0.009
0.0082
0.018
0.038
0.048
0.091
0.102
0.191
0.225
0.34
0.42
0.49
0.56
0.88
0.95
0.95
4
4.5
5.5
6.5
9.0
11
16
21
25
25
34
48
59
94
103
141
161
205
230
265
290
335
360
405
56
59
59
62
62
62
62
63
66
66
66
67
66
66
180
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Motor type
Product code
kW
Speed NEMA
r/min
Nom.
Eff.
% 1)
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75 3)
75
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71B
80 A
80 C
90 L
90 LB
100 LB
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
200 MLB
200 MLC
225 SMC
250 SMB
250 SMC
280 SMC
Efciency
acc. to IEC
Power
factor
100% 75%
Current
Torque
IN
Is
Nm
IN
0.5
0.6
0.9
1.2
1.45
2.0
2.6
3.7
5.1
9
9.4
14.5
8.6
9.2
9.8
8.3
9
9.7
7.9
8.7
9.9
9.9
4.6
5.4
6.6
7.1
8.4
9.5
8.1
7.5
11.0
11
15
20.7
30
40
50
59
81
99
121
147
201
201
Ts
Tmax
TN
TN
4.0
3.9
4.2
4.2
4.9
4.8
2.8
3.2
3.9
4.1
4
6
3.3
3.7
3.5
3
3.2
3.6
3.2
3.2
3.1
3.1
4.0
3.9
4.4
4.5
4.5
4.7
3.8
3.7
5.0
0.012
0.016
0.022
0.047
0.053
0.058
0.092
0.18
0.19
0.29
0.57
0.59
0.6
Moment Weight
of inertia
kg lbs
kgm2
460 V 60 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
061 391-
061 392-
071 391-
071 392-
081 731-
081 773-
091 312-
091 313-
101 312-
111 022-CG2
131 023-CG2
131 024-CG2
161 121-CG2
161 122-CG2
161 123-CG2
181 121-CG2
201 021-CG2
201 022-CG2
221 021-CG2
251 021-CG2
251 022-CG2
281 021-CG2
3400
3400
3450
3450
3480
3460
3535
3530
3560
3475
3500
3465
3545
3545
3545
3560
3555
3560
3575
3570
3565
3565
2)
2)
2)
2)
75.5
82.5
86.5
87.5
88.0
87.5
88.5
89.5
90.2
90.2
91
91
91.7
92.4
93
93
93.6
93.6
70.1
76.4
76.5
79.8
80.6
83.5
87.5
87.9
88.0
88.3
88.5
89.5
90.2
90.2
91
91
91.7
92.4
93
93
93.6
93.6
67.5
75.3
74.5
78.6
79.2
83.1
86.5
87.5
88.0
0.93
0.88
0.92
0.9
0.9
0.89
0.9
0.9
0.88
0.88
0.9
0.92
0.92
0.60
0.70
0.70
0.75
0.81
0.85
0.85
0.85
0.85
6.1
8.7
11.5
16.8
22.5
27.5
32.5
44.5
56
68
81
108
108
0.5
0.7
1.0
1.5
2.06
3.04
4.1
6.0
8.0
2.6
3.3
4.5
2.8
3.2
2.8
2.6
3.2
3.7
2.5
2.7
2.4
2.4
0.00013
0.00016
0.00040
0.00045
0.000722
0.001093
0.0024
0.0027
0.0005
33
42
56
84
94
100
137
200
205
260
330
345
390
3.9
4.4
5.5
6.5
9
11
16
18
25
145
158
158
158.4
158
158
161
165
165
169.4
171.6
171.6
171.6
8.6
9.7
12
14
20
24
35
40
55
66
72
72
72
72
72
73
75
75
77
78
78
78
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004 / Corr. 2005-03-04
181
Motor type
Product code
kW
Speed NEMA
r/min
Nom.
Eff.
% 1)
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
37
37
45
55
55
75
75
3)
3)
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71 B
80 A
80 C
90 L
100 LA
100 LC
100LB
112 M
132 S
132 M
160 M
160 L
180 M
180 L
200 MLB
225 SMB
225 SMC
225 SMD
250 SMB
250 SMC
280 SMB
Efciency
acc. to IEC
Power
factor
100% 75%
Current
Torque
IN
Is
Nm
IN
0.5
0.6
0.7
0.9
1.3
1.5
2.1
2.8
4.2
5.4
10.4
8.9
9.7
8.9
8.8
7.7
9.1
9.2
9.1
9.1
9.9
8.5
9.8
9.8
2.8
2.9
4.3
4.5
5.1
6.6
7.1
7.5
9.0
7.6
21.8
30
41
59
81
100
118
161
198
241
295
295
402
402
Ts
Tmax
TN
TN
2.6
2.5
3.1
3.2
3.0
4.1
3.0
3.0
4.1
3.1
4.6
3.5
3.6
3.7
3.6
3.1
3.8
3.4
3.3
3.5
3.7
3.4
3.4
3.4
2.7
2.6
3.1
3.2
3.0
3.1
3.8
4.0
4.8
3.7
0.018
0.038
0.048
0.091
0.102
0.191
0.225
0.34
0.42
0.49
0.56
0.88
0.95
0.95
Moment Weight
of inertia
kg lbs
kgm2
460 V 60 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
062 391-
062 392-
072 391-
072 392-
082 391-
082 733-
092 312-
102 311-
102 313-
102 342-
112 022-CG2
132 023-CG2
132 024-CG2
162 121-CG2
162 122-CG2
182 121-CG2
182 122-CG2
202 021-CG2
222 021-CG2
222 022-CG2
222 023-CG2
252 021-CG2
252 022-CG2
282 021-CG22
1680
1680
1700
1700
1700
1730
1750
1765
1770
1740
1775
1760
1765
1775
1770
1775
1780
1780
1785
1780
1785
1780
1785
1785
2)
2)
2)
2)
2)
82.5
84.0
86.5
87.5
87.5
87.5
89.5
89.5
91
91
92.4
92.4
93
93
93.6
94.1
94.1
94.5
94.5
58.8
62.8
66.7
70.6
73.3
82.5
85.5
87.2
87.5
87.5
87.5
89.5
89.5
91
91
92.4
92.4
93
93
93.6
94.1
94.1
94.5
94.5
54.5
59.5
63.9
68.3
71.6
82.1
84.0
86.0
87.5
87.5
0.8
0.83
0.85
0.81
0.83
0.84
0.83
0.83
0.84
0.86
0.86
0.86
0.84
0.84
0.55
0.57
0.68
0.69
0.74
0.78
0.78
0.79
0.75
0.82
7.1
9.3
12.4
18.4
24.5
29.5
35
48.5
59
69
85
85
117
117
0.7
1.0
1.4
2.1
3.1
4.14
6.1
8.2
11.9
16.5
3.9
2.7
3.5
3.5
3.5
3
3.4
4.1
3.9
3.9
4.5
3.2
3.2
3.2
0.00019
0.00026
0.00066
0.00089
0.001250
0.001848
0.0043
0.0069
0.009
0.0082
34
48
59
94
103
141
161
205
230
265
290
335
360
405
4
4.5
5.5
6.5
9.0
11
16
21
25
25
75
106
130
207
227
310
354
451
506
583
638
737
792
891
8.8
9.9
12
14
20
24
35
46
55
55
59
62
62
65
65
65
66
66
69
69
69
70
70
70
182
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
/ Corr. 2005-03-04
Variant
1)
Motor size
63
7180
90100
112132
160180
200250
280
Balancing
052
417
NA
NA
423
424
NA
NA
NA
037
NA
NA
NA
NA
039
NA
040
041
NA
NA
NA
042
NA
043
SPM nipples.
NA
NA
057
NA
NA
NA
058
059
188
63-series bearings.
796
797
798
NA
178
209
425
M
P
M
P
Coupling
035
Dimension drawing
141
Drain holes
065
066
Earthing bolt
067
1)
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
183
Code
Variant
1)
Motor size
63
7180
90100
112132
160180
200250
280
Heating elements
Motor size
63-71
80-160
180-280
Element capacity
8W
25 W
50 W
450
NA
451
NA
NA
NA
NA
Mounting arrangements
NOTE: Multiple ange sizes available using two-piece ange system, see page 48.
007
008
009
IM 3001 ange mounted, IEC ange, from IM 1001 (B5 from B3).
Large ange with clearance holes.
IM 2101 foot/ange mounted, IEC ange, from IM 1001 (B34 from
B3). Small ange with tapped holes. Frame size 180 not available.
IM 2001 foot/ange mounted, IEC ange, from IM 1001 (B35 from
B3). Large ange with clearance holes.
NA
NA
NA
Painting
114
179
NA
NA
NA
Protection
005
Protective roof, vertical motor, shaft down. Vertically mounted motors with shaft extension downwards. See also the Accessories
section for further information.
072
158
NA
211
Weather protected, IP xx W
NA
NA
NA
403
NA
784
Gamma-seal at D-end.
NA
003
138
139
163
NA
070
165
011
NA
NA
NA
029
408
NA
NA
1)
184
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Code
Variant
1)
Motor size
63
7180
90100
112132
160180
200250
280
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
435
436
437
439
440
NA
NA
NA
NA
NA
NA
NA
441
442
445
446
Terminal box
015
017
021
NA
NA
NA
180
NA
NA
NA
230
731
NA
1)
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
185
Code
Variant
1)
Motor size
63
7180
90100
112132
160180
200250
280
Testing
140
Test conrmation.
145
146
Type test with report for motor from specic delivery batch.
147
Type test report with motor from specic delivery batch, customer
witnessed.
148
149
NA
NA
221
Type test and multi-point load test with report for motor from specic delivery batch.
Torque/speed curve, type test and multi-point load test with report
from specic delivery batch.
222
760
762
1)
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
186
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Global motors
Sizes 63-280
Dimension drawings
Foot-mounted motor IM 1001 / B3
HD D
45
IM 3601, IM B14
PN
GA
K
B
B
S
45
H
E
IM 1001, IM B3
L max
poles
2
205
238
265
320
358.5
388
447
481.5
602.5
680
700.5
774
836
861
875
900
900
4
205
238
265
320
358.5
388
447
481.5
602.5
680
700.5
774
866
891
875
900
900
IM 3001, IM B5
HD
100
112
125
140
160
190
216
216
254
279
279
318
356
356
406
406
457
80
90
100
125
140
140
140
140
210
241
241
267
286
286
311
311
368
40
45
50
56
63
70
89
89
108
121
121
133
149
149
168
168
190
63
70
80
90
100
112
132
132
160
180
180
200
225
225
250
250
280
171
176
190
212
236
258
295.5
295.5
370
405
405
533
578
578
626
626
656
7
7
10
10
12
12
12
12
15
15
15
18
18
18
22
22
24
115
130
165
165
215
215
265
265
300
300
300
350
400
400
500
500
500
95
110
130
130
180
180
230
230
250
250
250
300
350
350
450
450
450
140
160
200
200
250
250
300
300
350
350
350
400
450
450
550
550
550
10
10
12
12
15
14.5
14.5
14.5
19
19
19
19
19
19
19
19
19
178
178
254
279
279
305
311
311
349
349
419
Tolerances:
Motor
size
63
71
80
90
100
112
132
75
85
100
115
130
130
165
60
70
80
95
110
130
165
90
105
120
140
160
160
200
M5
M6
M6
M8
M8
M8
M10
A, B
D, DA
F, FA
H
N
C, CA
0,8
ISO k6 < 50mm
ISO m6 > 50mm
ISO h9
-0,5
ISO j6
0.8
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
187
Rating plates
The applicable Global motor standards provide the
following minimum requirements for markings to be
shown on the rating plate.
188
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
board, the winding can be connected in either D or Y conguration. The terminal box has plenty of
space and is designed for easy and
secure installation.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
189
Feet
63
80
90
100
112
132
Material
Paint colour shade
Paint
Material
Bearings
D-end
N-end
Axially-locked
bearings
Bearing seals
D-end
N-end
Lubrication
Terminal box
Connections
71
V-ring.
Labyrinth seal.
Permanent grease lubrication.
Grease for bearing temperatures -30 to +110C.
Material
Surface treatment
Screws
Similar to stator.
Steel 5G. Chromated.
4 x M25
2 x (M25 + M20)
Terminal box
Screws
Max Cu-area, mm2
Fan
Material
Fan cover
Material
Steel.
Stator winding
Material
Impregnation
Insulation class
Winding protection
Copper
Polyester vanish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Optional.
Rotor winding
Material
Die-cast aluminum.
2,5
Polypropylene.
Balancing method
Key ways
Heating elements
25 W
Drain holes
Enclosure
IP 55
Cooling method
IC 411
190
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
Motor size
Stator
160
Material
180
200
225
250
280
Material
Aluminum alloy,
integrated with stator.
Die-cast
Flanged bearing end shields of cast iron,
aluminum alloy. other die-cast aluminum alloy
Munsell blue 8B 4.5/3.25 / NCS 4822-B05G / RAL 5014
Polyester powder paint, 50 m.
Bearings
D-end
Single-speed motors N-end
6309-2Z/C3
6310-2Z/C3
6209-2Z/C3
6209-2Z/C3
1)
6315/C3 for 2-pole motor
Axially-locked
bearings
Bearing seals
D-end
N-end
Lubrication
Terminal box
Material
Surface treatment
Screws
Connections
6312/C3
6210/C3
6313/C3
6212/C3
Cast iron
6315/C3
6213/C3
V-ring.
Labyrinth seal.
Regreasable bearings.
Grease for bearing temperatures -40 to 150C.
Cast iron
6316/C3 1)
6213/C3
2 x FL 13.2 x M40
2 x FL 21.2 x M63 voltage code S
Screws
Max Cu-area, mm2
Fan
Material
Fan cover
Material
Steel sheet.
Phosphated. Polyester paint.
Stator winding
Material
Impregnation
Insulation class
Winding protection
Copper
Polyester vanish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Optional.
PTC-thermistors, 150C
Rotor winding
Material
Die-cast aluminum.
2 x FL21, 2 x
M63,1 x M16
M10
70
Balancing method
Key way
Heating elements
25 W
Drain holes
Enclosure
IP 55
Cooling method
IC 411
50 W
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors GB 12-2004
191
192
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Global Motors 12-2004
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
Mechanical design.................................194
Ordering information .............................201
Technical data ........................................202
Variant codes .........................................214
Rating plates ..........................................214
Dimension drawings .............................215
Brake motors in brief ............................217
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
193
Mechanical design
Degrees of protection
The degrees of protection, as per IEC standards 600345, are: terminal box and electrical components of the
brake IP 55; other motor parts IP 55.
Operation
ABBs brake motor is a standard motor modied for
braking duties, i.e. a three phase induction motor with
standard dimensions and output rating.
194
Motor size
D-end
N-end
M3VRF/S 63 A, B, BB
63 MA, MB
71
80
M3ARF/S 90
100
112
132
160
180
6202-2Z/C3
6201-2Z
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6306-2Z/C3
6206-2Z/C3
6208-2Z/C3
6309-2Z/C3
6310-2Z/C3
6202-2Z/C3
6201-2Z
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6209-2Z/C3
6209-2Z/C3
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Brake design
General
Detailed view
1
2
3
4
5
6
7
8
9
10
11
12
13
10
11
12
13
Brake disc
The brake lining is made from asbestos-free material.
It is highly resistant to wear and has excellent thermal
conductivity, thus giving consistent performance even at
high temperatures.
The brake disc withstands a large number of braking
operations and is insensitive to dust and moisture.
The core of the brake disc is grooved and made of special
polyamide that absorbs impacts, enabling it to work with
high vibration applications.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
10
Air gap
195
Rectier
Reconnection (t21=)
To obtain instant braking, please see table 2 (t21=), use
the following diagram.
Reconnection (t21)
When it is necessary to reduce the braking time, the
connections should be modied according to the
following diagram. The breaking of the circuit on the AC
side is controlled by using an auxiliary contact of the
contactor.
Connection of AC brake
The coil should only be used between 90% - 110% of
its rated voltage.
Standard connection (t21)
Reconnection (t21f)
To obtain instant braking, the coil must be fed
separately from the motor terminals.
Remark:
Regardless of whether a DC or AC brake is used, the brake is usually connected to the motor terminals of singlespeed motors. It can, however, also be delivered with a separate brake supply (variant code 086). In case of twospeed motors, the brake is always connected separately.
196
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Hand release
The device is a lever used to override the action of the
brake springs for as long as it is applied.
Hand release is included as standard, except for frame
size 63, where it is available as option, see variant code
088.
When installing the release lever, please proceed as
follows:
Remove the rubber protection, if tted. Insert the screw
(1) with its washer, position the spring (2) and washer
(3) and tighten the nut (4) rmly. Fit the other washer
and the square-head nut (5); adjust the position of the
nut in relation to the moving magnet (Y value) with the
central screw (1). When the required value is reached,
tighten the inner nut (4) while holding nut (5) xed.
Size
FM 075.5
FM 088.6
FM 100.6
FM 120.6
FM 140.6
FM 155.6
FM 170.6
FM 206.6
1
1
1
1
1.5
1.5
1.5
1.5
Torque adjustment
In brake motors from frame size 71 up to 180, the
braking torque can be adjusted from 100% up to 55% of
the nominal torque as standard.
Instructions for how to regulate torque are delivered
with the brake motor. These instructions describe how
to loosen the torque regulation screw (13), as well as
the relation between dimension A and torque.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
197
t21
= Braking time.
U2 = Rated voltage.
TB = Nominal braking torque.
Brake release time = the time from when voltage is
applied to the brake coil up to the ceasing of braking
action.
Braking time = the time from when the current is
switched off up to the starting of braking action.
Rectier input
voltage (V AC)
Rectier type
110
220
230
240
250
254
380
400
415
420
440
500
24 V DC
F.W.
F.W.
F.W.
F.W.
F.W.
F.W.
H.W.
H.W
H.W
H.W.
H.W.
H.W.
None
1)
198
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
M3VRF M3VRS 63
63M_
63M_
A/B
71
80
90
100
112
132
160/180
2 p 4-8 p
Brake type
K01
AC1
075.5
088.6
100.6
120.6
140.6
155.6
170.6
206.6
TBnom (Nm)
4.5
4.5
7.5
10
24
35
44
86
130
200
230
TBdel (Nm)
21
30
38
72
120
130
200
X (mm)
0.2
0.2
0.2
0.2
0.25
0.35
0.4
0.4
0.4
0.4
Minimum permissible
(mm)
3.5
3.5
5.5
7.5
8.5
Xn (mm)
0.7
0.7
0.5
0.5
0.6
0.7
0.8
0.8
0.8
0.9
Thickness of new
Em (mm)
5.5
7.5
8.5
9.5
9.5
11
13
Cs (Nm)
12
12
30
30
30
50
- AC brake motor
(VA)
40
60
110
160
250
500
700
990
2000
- DC brake motor
(W)
15
30
32
45
72
91
100
120
170
Friction work
WRmax (J)
1x103
1x103
1x103
1.5x103 2x103
8x103
1.1x104
2x104
Friction work
3x105
3x105
9x105
9.5x105
1x106
1.2x106
WR0.1 (J)
7x106
7x106
7x106
10x106
31x106
31.5x106 48x106
80x106
Moment of inertia
J (kgm2)
3.7x10-4
6.2x10-4
10.4x10-4
26.4x10-4
Weight
(kg)
1.2
5.2
16.2
Rated torque
1)
Delivered torque
2)
brake disc
Tightening torque: bolt
Input coil:
3.5x103 6.6x103
per operation
1)
1.2
0.8
15x106
1.6
17x106
2.7
Delivered torque : Torque value marked on rating plate corresponding to the braking torque
when the brake motor leaves the ABB factory. Tolerance of +/-10% of this value is accepted.
Ambient conditions, temperature on friction surfaces, brake motor positioning and transport
applied on the product can affect this value.
2)
In general, all the variables mentioned above can affect the braking torque values, so if an accurate value is needed, ABB recommends it is
measured in the real application. This allows adjustment to the required value by using the torque regulation facility.
Table 2.
M3VRF M3VRS 63
63 M_ 63 M_ A/B
71
80
90
100
112
132
160/180
Brake type
K01
AC1
075.5
088.6
100.6
120.6
140.6
155.6
170.6
206.6
AC brake coil
- release time
- standard braking time
- fast braking time
t1 (ms)
t21 (ms)
t21f (ms)
10
25
10
5
25
10
6.6
25
10
5
30
10
5.1
40
10
5.5
50
10
5
50
10
5
65
10
5.5
105
10
DC brake coil
- release time
- std connection time
- reconnection time
- fast reconnection time
t1 (ms)
t21(ms)
t21 (ms)
t21= (ms)
45
15
20
150
30
10
20
170
35
10
25
210
45
15
35
330
70
20
40
420
90
35
50
720
155
45
60
850
190
55
100
930
150
85
When fast braking in AC brake is used, the contactor that is operating the coil of the brake
has to be over dimensioned taking in consideration a high inductive load.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
199
Calculations
Maximum number of connections per hour
Jm + Jb x
x J x nm
30
in joules
WR x c/h
Braking time
The total braking time from the disconnecting of brake
until the machine is stopped is calculated as follows:
t=
104.6 x
J x nm
+ t21
TB
Required data:
Type of brake motor
Load inertia reduced at motor shaft
Required power P2
Type of service
1
2
[ [ nn ] ]
b
WR =
WR0.1
WR
Xn - X
0.1
x L0.1
Options
Separate brake supply
Dust protection
To protect the brake disc against dust, the brake can be
supplied with a rubber protection ring and V-ring.
Protective roof
To protect motors from accumulation of water, ice or
snow when installed outdoors in the vertical position
and with the shaft downwards, the assembly should be
tted with a protective roof.
Variant code 005 should in this case be stated in the
order.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
Brake information
A
B
M3ARF 112 M
A
C
D,E,F, G
3GAR 112 401 - ADE, 088 etc.
1-4
5-6 7
8 - 10
11 12 13 14
B
C
M3ARF 112M
4
IM B3 (IM 1001)
4 kW
3GAR112401-ADE
Motor type
M3VRF/M3ARF (DC brake)
M3VRS/M3ARS (AC brake)
Motor size
Product code
D Mounting arrangement code
E Voltage/frequency code
F Generation code
Variant code
12
13
16
18
Position 7
Speed (Pole pairs)
1 = 2 poles
6
2 = 4 poles
7
3 = 6 poles
8
4 = 8 poles
9
5 = 10 poles
= 112
= 132
= 160
= 180
=12 poles
= > 12 poles
=Two-speed motors
=Multi-speed motors
Mounting arrangement
A = Foot-mounted.
B = Flange-mounted. Large aluminum ange with
clearance holes, sizes 63-100 and 180.
C = Flange-mounted. Small aluminum ange with
tapped holes, sizes 63-100.
E = Flange-mounted. Large cast iron ange with
clearance holes, sizes 112-160.
H = Foot- and ange-mounted. Large aluminum ange
with clearance holes, sizes 63-100 and 180.
J = Foot- and ange-mounted. Small aluminum ange
with tapped holes, sizes 63-100.
K = Foot- and ange-mounted. Large cast iron ange
with clearance holes, sizes 112-160.
N = Flange mounted. Two piece cast iron ange (IEC-1)
with clearance holes, sizes 90-132.
P = Foot- and ange-mounted. Two piece cast iron
ange (IEC) with clearance holes, sizes 90-132.
Position 13
Voltage and frequency code
See table below
Position 8 to 10
Serial number
Position 14
Generation code = C (size 63), E (sizes 71-180)
Position 11
- (dash)
Position 12
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
201
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
Product code
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
63 A
63 MA
63 B
63 MB
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
1)
2)
3)
3)
3)
3)
3)
3)
3)
M3VRF 63 BB
M3VRF 71 BB
M3VRF 71 BC
M3VRF 80 C
M3ARF 90 LB
M3ARF 100 LB
M3ARF 112 MB
M3ARF 132 SBB
M3ARF 132 SC
M3ARF 160 LB
100% 75%
12.5
7.3
8.33
5.2
7.6
5.26
9.6
6.48
7.0
4.7
4.4
6.41
7.06
5.17
5.55
4.1
3.3
2.8
73.7
64.0
77.5
68.0
77.1
79.2
81.2
81.4
80.1
83.6
86.0
86.0
86.0
88.0
88.4
89.4
90.4
91.5
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
061 401-C
061 411-C
061 402-C
061 412-C
071 401-E
071 402-E
081 401-E
081 402-E
091 401-E
091 402-E
101 401-E
111 401-E
131 401-E
131 402-E
161 411-E
161 412-E
161 413-E
181 411-E
Efciency
1)
2820
2800
2810
2800
2840
2830
2870
2850
2870
2880
2900
2850
2855
2860
2915
2900
2915
2925
0.62
0.62
0.87
0.86
1.25
1.86
2.49
3.69
5.0
7.5
10
13.4
18.4
25.1
36
49
60
72
3.5
2.3
3.6
2.2
3.8
3.6
2.9
2.3
2.4
2.7
2.7
2.8
3.2
3.4
2.1
2.3
2.5
3.0
061 403-C
071 403-E
071 404-E
081 403-E
091 403-E
101 402-E
111 402-E
131 404-E
131 403-E
161 404-E
2800
2800
2800
2840
2860
2900
2855
2825
2835
2920
1.29
2.33
2.57
5.13
9.0
13
18.4
31.1
37
72
2.3
3.2
3.1
2.8
2.6
2.7
2.7
3.2
3.2
2.6
Current
IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
3500
3500
3500
3500
2600
2600
2000
2000
1300
1200
1000
500
600
500
200
200
200
120
0.00023
0.00022
0.00026
0.00028
0.00051
0.0006
0.00074
0.00078
0.0021
0.0026
0.00453
0.01078
0.01657
0.01857
0.05096
0.05596
0.06396
0.06264
4.9
5
5.4
6
7
8
11
12
19
22
32
38
57
62
124
134
139
158
3500
2400
2400
1800
1200
1000
500
500
500
200
0.00027
0.0006
0.0006
0.00111
0.0029
0.00543
0.01273
0.02457
0.02383
0.06896
5.9
8
8
13
24
36
66
77
77
145
IS/IN c/h
2)
Basic design
3.1
2.4
3.3
2.3
3.9
3.7
3.6
3.5
3.0
3.0
3.6
3.0
3.4
3.6
2.5
2.5
2.7
3.2
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
Power
factor
cos
70.6
63.0
75.8
66.0
76.5
78.2
79.3
79.5
76.2
83.9
84.1
86.2
86.6
86.2
88.0
89.7
90.7
91.7
0.64
0.80
0.71
0.83
0.72
0.76
0.75
0.78
0.82
0.87
0.88
0.91
0.88
0.89
0.88
0.90
0.91
0.89
0.56
0.51
0.66
0.64
1.0
1.35
1.8
2.5
3.35
4.37
5.95
7.4
10.5
13.9
20.5
27
32.5
39
4.2
4.2
4.5
4.2
5.5
5.7
6.2
6.1
5.5
7.0
7.5
7.5
7.8
8.5
6.1
6.0
6.7
8.0
High-output design
2.2
3.3
3.2
3.1
3.0
3.6
2.9
3.5
3.3
2.6
5.76
4.34
3.84
4.7
3.88
3.38
4.67
4.18
3.51
2.77
73.6
78.9
78.5
82.4
80.7
85.0
86.5
86.0
87.0
92.1
73.1
77.4
77.9
82.2
83.5
84.3
87.1
88.2
87.4
92.1
0.81
0.82
0.85
0.83
0.86
0.86
0.93
0.93
0.93
0.91
0.9
1.59
1.7
3.16
5.7
8.1
9.9
16.6
19.6
38
3.5
5.2
5.1
5.5
7.0
7.5
7.3
7.3
8.0
7.1
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering information
page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
Flange-mounted, 1 ange
Flange-mounted, 2 anges
Flange-mounted, small ange
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V
380-420 VY
250-280 V
380-420 V
660-690 VY
440-480 V
160-180
230 V
400 VY
265 V
400 V
690 VY
460 V
Motor
size
Motor
size
63-80
90-180
202
E
Motor
F
Motor
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
500 V
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
Product code
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
63 A
63 MA
63 B
63 MB
71 A
71 B
80 A
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
132 M
160 M
160 L
180 M
180 L
1)
2)
3)
3)
3)
3)
3)
3)
3)
3)
M3VRF
M3VRF
M3VRF
M3VRF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
63 BB
71 BB
71 C
80 C
90 L
90 LB
100 LC
112 MB
132 MBA
132 MB
160 LB
K1)
100% 75%
9.37
5.4
5.76
3.6
5.88
4.0
6.31
4.7
4.66
3.5
2.93
2.2
3.23
3.59
2.63
3.2
2.3
1.9
1.6
63.7
54.0
65.6
61.0
70.4
74.6
75.3
78.2
77.5
80.3
83.0
85.0
84.5
87.0
88.0
88.4
90.0
90.4
91.1
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
062 401-C
062 411-C
062 402-C
062 412-C
072 401-E
072 402-E
082 401-E
082 402-E
092 401-E
092 402-E
102 401-E
102 402-E
112 401-E
132 401-E
132 402-E
162 411-E
162 412-E
182 411-E
182 412-E
Efciency
1400
1365
1380
1380
1410
1420
1390
1410
1410
1420
1430
1430
1435
1450
1450
1465
1460
1455
1460
0.82
0.84
1.25
1.25
1.71
2.51
3.75
5.08
7.5
10
15
20
26.6
36.2
49.4
72
98
121
144
2.6
2.0
2.5
2.2
2.7
2.6
2.6
3.5
2.2
2.4
2.4
2.5
2.9
2.2
2.5
2.4
2.8
2.6
3.0
062 403-C
072 403-E
072 404-E
082 403-E
092 403-E
092 404-E
102 403-E
112 402-E
132 404-E
132 403-E
162 403-E
1370
1390
1410
1410
1390
1390
1420
1425
1450
1450
1450
1.75
3.11
3.74
6.44
13
15
27
36.9
60
72
122
2.5
2.1
2.7
2.9
2.2
2.2
2.5
2.8
2.0
2.5
2.9
Current
IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
7100
7100
7100
7100
6500
6500
5000
5000
3200
3200
2700
2700
2500
1800
1400
500
500
360
360
0.00029
0.00026
0.00036
0.00033
0.00081
0.00104
0.00128
0.00159
0.0034
0.0045
0.00733
0.00863
0.01578
0.03357
0.04057
0.07696
0.08796
0.10464
0.12964
5
5
5.5
5
7
8
11
12
19
22
32
35
40
60
68
117
129
161
175
7100
6500
6500
500
3200
3200
2700
2500
1400
500
500
0.0004
0.00104
0.00125
0.00197
0.0045
0.0048
0.009
0.018
0.05
0.05
0.107
6
8
9
13
22
23
36
47
83
83
143
IS/IN c/h2)
Basic design
2.6
2.3
2.6
2.4
2.9
2.8
2.9
3.9
2.7
2.9
2.9
2.9
3.1
3.0
3.2
3.0
2.8
2.9
3.1
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
Power
factor
cos
58.4
52.0
62.1
57.0
69.1
72.1
73.1
75.6
76.4
78.1
82.7
83.9
83.9
87.7
88.6
88.8
90.5
90.4
91.5
0.59
0.66
0.64
0.63
0.71
0.69
0.76
0.74
0.81
0.79
0.81
0.81
0.80
0.83
0.83
0.78
0.82
0.84
0.82
0.46
0.49
0.63
0.68
0.74
1.05
1.4
1.9
2.59
3.45
4.8
6.48
8.6
11.1
14.8
22.5
29
35
42
3.1
2.8
3.1
3.2
4.3
4.4
4.6
4.7
5.0
5.0
5.5
5.5
7.0
7.3
7.9
6.9
7.2
7.0
8.0
High-output design
2.1
2.3
2.9
3.3
2.4
2.4
2.8
3.1
2.8
2.7
2.9
4.16
3.22
2.7
3.75
2.69
2.33
1.62
2.33
2.14
1.79
1.88
70.3
75.5
77.3
78.9
79.5
80.3
81.0
84.5
88.0
88.0
90.5
67.4
75.3
76.9
77.9
78.1
81.0
81.7
83.5
88.6
89.4
88.9
0.67
0.76
0.73
0.75
0.80
0.83
0.82
0.83
0.85
0.86
0.84
0.78
1.15
1.45
2.35
4.4
4.85
8.65
11.4
17.8
21
36
3.2
4.1
4.8
4.3
4.5
4.5
5.5
7.1
7.3
8.3
6.9
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering information
page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
Flange-mounted, 1 ange
Flange-mounted, 2 anges
Flange-mounted, small ange
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V
380-420 VY
250-280 V
380-420 V
660-690 VY
440-480 V
160-180
230 V
400 VY
265 V
400 V
690 VY
460 V
Motor
size
Motor
size
63-80
90-180
E
Motor
F
Motor
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
500 V
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
203
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
Product code
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
63 A
63 B
63 MB
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 S
132 MA
132 MB
160 M
160 L
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
1)
2)
3)
3)
3)
3)
3)
3)
M3VRF
M3VRF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
63 BB
71 C
90 LB
100 LC
112 MB
132 MC
160 LB
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
K1)
100% 75%
7.89
5.9
3.5
5.31
3.84
6.28
4.22
4.66
3.18
2.93
3.85
4.36
3.27
2.36
3.14
2.13
47.1
56.0
56.0
61.1
64.9
72.9
73.3
71.5
74.4
80.0
80.5
84.5
85.5
86.0
89.3
89.8
400 V 50 Hz
063 401-C
063 402-C
063 412-C
073 401-E
073 402-E
083 401-E
083 402-E
093 401-E
093 402-E
103 401-E
113 401-E
133 401-E
133 402-E
133 403-E
163 401-E
163 402-E
Efciency
910
860
860
920
920
925
925
930
930
950
940
960
960
955
970
970
0.95
1.27
1.27
1.88
2.61
3.82
5.68
7.5
11
15
22.3
29.8
39.7
55
74
109
2.1
1.8
1.8
2.1
2.5
3.1
2.9
1.9
2.1
1.9
2.1
2.0
2.0
2.2
2.0
2.2
900
920
910
940
935
960
960
1.61
3.33
13.5
22
30.6
64
139
2.2
2.6
1.9
1.9
2.0
2.0
2.7
Current
IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
7700
7700
7700
7500
7500
7000
7000
3800
3900
3300
3200
2400
1900
1900
600
600
0.0003
0.00037
0.00033
0.00078
0.00096
0.00186
0.0022
0.0034
0.0045
0.0086
0.015
0.033
0.04
0.047
0.087
0.127
5
5.5
5
7
8
11
12
19
22
34
40
59
66
74
129
149
7700
7500
3800
3300
3200
2400
1900
0.00042
0.00125
0.005
0.009
0.018
0.051
0.147
6
9
24
37
46
79
164
IS/IN c/h2)
Basic design
2.1
2.2
2.2
2.2
2.7
3.4
3.1
2.3
2.4
2.3
2.7
2.6
2.8
2.8
2.8
2.9
400 V 50 Hz
063 403-C
073 403-E
093 403-E
103 402-E
113 402-E
133 404-E
163 403-E
Power
factor
cos
42.5
53.5
50.0
57.7
62.3
70.8
71.9
70.7
72.5
77.0
79.3
82.7
83.1
85.0
88.4
88.5
0.56
0.55
0.55
0.69
0.65
0.72
0.71
0.67
0.69
0.71
0.74
0.75
0.78
0.78
0.79
0.78
0.51
0.56
0.56
0.64
0.86
1.04
1.55
2.36
3.25
3.92
5.4
6.9
8.7
11.9
15.4
23
2.1
2.4
2.4
2.9
3.2
3.8
3.4
4.0
4.0
4.5
5.6
6.1
7.1
6.9
6.7
7.1
High-output design
2.3
2.8
2.2
2.3
2.7
2.7
3.1
4.68
3.1
2.59
2.0
2.81
2.01
1.65
56.9
64.8
69.0
77.0
80.0
85.0
89.1
52.1
61.6
69.0
72.8
79.9
84.5
84.5
0.54
0.63
0.71
0.71
0.76
0.75
0.77
0.74
1.15
3.85
5.9
7.2
14.8
29.5
2.2
3.2
4.0
4.5
5.5
6.6
7.6
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering information
page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V
380-420 VY
250-280 V
380-420 V
660-690 VY
440-480 V
160-180
230 V
400 VY
265 V
400 V
690 VY
460 V
Motor
size
Motor
size
63-80
90-180
204
E
Motor
F
Motor
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
500 V
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Product code
1)
2)
3)
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
132 M
160 MA
160 M
160 L
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
064 401-C
074 401-E
074 402-E
084 401-E
084 402-E
094 401-E
094 402-E
104 401-E
104 402-E
114 401-E
134 401-E
134 402-E
164 401-E
164 402-E
164 403-E
680
690
690
700
700
700
690
700
700
695
720
720
715
710
715
Efciency
K1)
100% 75%
Power
factor
cos
Current
IN
A
IS/IN c/h2)
0.45
0.52
0.69
0.75
0.85
1.6
2.35
2.55
3.35
4.5
5.9
7.8
10
13.4
18.1
1.8
2.2
2.2
3.1
3.1
3.0
3.0
3.5
3.5
4.1
5.3
5.5
5.2
5.4
5.4
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
0.00037
0.00078
0.00096
0.0022
0.00245
0.0032
0.0045
0.0073
0.0086
0.016
0.04
0.047
0.11
0.11
0.127
5.5
7
8
11
12
19
22
31
34
41
66
73
139
139
154
Basic design
0.78
1.25
1.67
2.46
3.52
5
7.5
10
15
20.6
29.2
39.8
54
74
100
2.1
2.3
2.5
3.2
2.9
1.9
1.7
2.1
2.1
1.9
1.6
1.8
2.1
2.4
2.4
2.1
2.3
2.5
3.6
3.1
2.4
2.1
2.7
2.7
2.4
2.5
2.5
2.4
2.6
2.8
9.4
7.69
5.88
9.6
6.85
7.0
4.66
4.4
2.93
4.17
4.45
3.26
4.39
3.17
2.31
38.3
45.8
46.4
59.9
70.7
61.5
62.9
72.0
73.0
74.5
80.5
82.0
84.1
84.7
86.3
31.8
37.5
38.1
54.5
67.4
43.4
56.4
63.6
68.8
75.9
77.8
79.2
81.1
75.0
82.4
0.48
0.57
0.55
0.60
0.62
0.56
0.57
0.59
0.64
0.65
0.67
0.68
0.69
0.70
0.70
7700
7500
7500
7500
7500
4100
4100
3600
3700
3600
3000
2600
600
600
600
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering information
page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V
380-420 VY
250-280 V
380-420 V
660-690 VY
440-480 V
160-180
230 V
400 VY
265 V
400 V
690 VY
460 V
Motor
size
Motor
size
63-80
90-180
E
Motor
F
Motor
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
50 Hz
Brake
(input rectier
voltage/brake voltage)
500 V
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
205
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
1.1/0.55
1.5/0.75
2.0/1.0
2.6/1.3
4.4/2.2
5.6/2.8
2900/1450
2900/1450
2900/1460
2900/1460
2925/1450
2885/1440
M3ARF 90 S
M3ARF 90 L
M3ARF 100 L
M3ARF 112 M
M3ARF 132 SB
M3ARF 132 M
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
098 401-E
098 402-E
108 401-E
118 401-E
138 401-E
138 402-E
3.6/3.6
4.9/4.9
6.5/6.5
8.6/8.5
14.4/14.5
18.5/18.6
400 V 50 Hz
0.2/0.15 M3VRF 63 A
0.3/0.2 M3VRF 63 B
0.37/0.25 M3VRF 71 A
0.48/0.31 M3VRF 71 B
0.55/0.37 M3VRF 71 C
0.63/0.5 M3VRF 80 A
0.85/0.65 M3VRF 80 B
1.1/0.8 M3VRF 80 C
1.3/1
M3ARF 90 S
1.9/1.5 M3ARF 90 L
2.5/2.1 M3ARF 100 LA
3.4/2.5 M3ARF 100 LB
4/2.6
M3ARF 112 M
4.7/3.1 M3ARF 132 SB
6.3/4.4 M3ARF 132 SA
7.2/4.8 M3ARF 132 M
8/6.2
M3ARF 132 SC
9.6/7
M3ARF 132 MD
12.5/9
M3ARF 160 M
15/10.5 M3ARF 160 L
2800/1400
2740/1370
2700/1390
2780/1400
2800/1400
2690/1400
2725/1405
2730/1410
2730/1400
2820/1420
2800/1430
2810/1430
2865/1430
2820/1420
2895/1445
2870/1435
2910/1440
2900/1440
2890/1440
2900/1445
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 401-C
068 402-C
078 401-E
078 402-E
078 403-E
088 401-E
088 402-E
088 403-E
098 403-E
098 404-E
108 402-E
108 403-E
118 402-E
138 403-E
138 411-E
138 404-E
138 412-E
138 413-E
168 404-E
168 405-E
0.68/1.02
1.05/1.4
1.3/1.72
1.66/2.15
1.87/2.52
2.25/3.42
2.99/4.43
3.8/5.38
4.5/6.8
6.4/10
8.5/14
11.5/18
13.3/17.4
15.9/20.8
20/8/2029
24/31.9
26.2/41.1
31.6/46.4
41/60
49/69
400 V 50 Hz
0.11/0.08 M3VRF 63 B
0.3/0.2 M3VRF 71 A
0.37/0.22 M3VRF 71 B
0.43/0.28 M3VRF 80 A
0.58/0.37 M3VRF 80 B
0.8/0.5 M3ARF 90 S
1.2/0.75 M3ARF 90 L
1.5/0.9 M3ARF 100 LA
1.8/1.1 M3ARF 100 LB
2.6/1.7 M3ARF 112 M
3.3/2.2 M3ARF 132 S
4.5/3
M3ARF 132 M
5.5/3.7 M3ARF 132 MD
7.5/5.5 M3ARF 160 M
11.5/8.5 M3ARF 160 L
1390/860
1390/900
1380/900
1380/910
1390/920
1430/940
1430/940
1440/960
1460/960
1445/960
1470/980
1470/980
1460/960
1465/965
1465/965
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 403-C
078 404-E
078 405-E
088 404-E
088 405-E
098 405-E
098 406-E
108 404-E
108 405-E
118 403-E
138 405-E
138 406-E
138 414-E
168 406-E
168 407-E
0.75/0.88
1.37/0.79
2.07/1.91
2.54/3.02
4/3.85
5.3/5
8/7.6
9.9/8.9
11/11
17.2/16.9
21.4/21.4
29.2/29.2
36/36.8
49/54
75/84
braking
TB
TS/TN
Nm
1)
Efciency
%
Power
factor
cos
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
1.4/1.5
1.5/1.5
1.9/1.4
1.6/1.6
2/1.3
1.8/1.4
9.7/9.7
7.1/7.1
7.7/7.7
10/9.9
10.4/10
8.1/8.1
74/62
77/70
76/67
80/75
81/74
82/77
7.5
7.5
10
10
10
24
24
24
35
35
44
44
86
130
130
130
130
130
230
230
2.1/2
1.7/2.1
1.9/1.5
1.4/2
1.8/1.9
1.8/1.9
1.9/2
2/2
2/1.5
2.8/2
2.2/1.6
2.2/1.9
1.8/2.3
1.8/2.2
1.7/1.6
2.4/2.5
1.9/1.6
1.8/1.7
1.4/1.8
1.6/2.1
11/7.4
7.1/5.4
9.2/7
7.1/5.6
6.4/4.8
7.6/5.5
5.4/3.6
4.7/3.3
7.8/5.1
5.5/3.5
5.9/3.6
4.3/2.7
10/9.9
7.2/5.2
10.4/10
6.9/3.6
6.3/4.7
4.7/3.2
5.6/3.8
4.7/3.3
63/54
59/55
64/60
68/68
66/64
66/67
70/70
72/71
71/71
74/75
68/76
78/80
82/77
79/77
85/84
84/81
87/85
87/85
85.5/85.5
87/86
7.5
10
10
24
24
35
35
44
44
86
130
130
130
230
230
1.4/1.8
1.1/1.05
1/1.1
1.5/1.4
1.5/1.5
1.5/1.4
1.7/1.5
1.5/1.5
2.1/1.6
1.5/1.5
1.4/1.2
1.4/1.5
1.9/1.8
2.1/1.8
2.1/1.8
10/8.5
15.2/8.8
6.3/5.8
7.1/6
4/3.5
7/6.6
4.6/4.4
5.6/5.1
4.5/4.5
5/4.9
7/7
5.1/5.1
4.2/4.2
3.1/2.7
2.9/2.7
40/25
51/40
58/40
60/54
63/58
68/57
73/63
75/69
77/70
80/70
82/76
82/77
85/81
85.5/80.5
86.5/82.5
0.85/0.64
0.87/0.67
0.89/0.66
0.92/0.72
0.86/0.73
0.93/0.75
2.5/2
3.3/2.4
4.3/3.3
5.1/3.5
9.1/5.9
10.6/7
5.1/3.6
5.7/4.1
6.2/4
6.4/5
7.3/4.5
6.7/5
0.0019
0.0024
0.0041
0.012
0.016
0.022
20
23
32
45
55
76
0.65/0.65
0.95/0.85
0.95/0.7
1.2/0.9
1.5/1.2
1.6/1.35
2/1.7
2.55/2.05
3.1/2.6
4.4/3.9
6/5
7.2/5.9
7.6/6.5
9.2/7.7
11.4/9.5
13.3/11.5
14/12.7
16.8/14.1
22.5/19
27/23
3.6/2.8
2.8/2.8
3.3/3.1
3.6/4
4.7/4.3
3.6/4.2
4/4.4
4.2/4.7
3.9/3.8
5.1/4.4
4.8/4.4
5.3/5.4
6.3/6.2
5.5/5.7
6.5/5.7
7.1/6.2
7.8/5.6
7.6/5.9
5.2/4.6
5.8/4.9
0.00019
0.00026
0.00066
0.00089
0.0011
0.0013
0.0016
0.002
0.0032
0.0043
0.0069
0.0082
0,012
0,016
0,0155
0,022
0,0215
0,026
0,054
0,057
5
5.5
7
8
8.5
11
12.5
13
20
23
32
35
45
55
58
76
78
85
129
139
0.55/0.62
0.7/0.5
0.9/0.8
1.4/1.2
1.6/1.15
2.2/2
3/2.6
3.5/3
4.4/3.6
5.5/4.4
7.1/6.4
9.8/8
10.7/8.3
15.5/13
23/19.5
2.5/1.8
2.8/2
2.7/1.9
3.1/2.9
3.3/3.2
3.9/2.8
4.4/3.1
4.7/3.8
5.8/3.9
5.9/5.2
6.8/4.6
7.2/5.6
8/6.3
7.1/4.7
7/4.9
0.00026
0.00066
0.00089
0.0019
0.0022
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
0.036
0.089
0.119
5.5
7
8
12
12.5
20
23
32
35
45
61
79
84
129
139
Braking-torque ratio
206
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
0.25/0.06 M3VRF 71 A
0.37/0.09 M3VRF 71 B
0.5/0.12 M3VRF 80 A
0.66/0.15 M3VRF 80 B
0.75/0.18 M3ARF 90 LA
1.3/0.33 M3ARF 90 LB
1.8/0.5 M3ARF 100 LB
2.2/0.59 M3ARF 112 MC
3.3/0.95 M3ARF 132 SA
4.4/1.3 M3ARF 132 MC
2760/660
2800/660
2730/700
2780/700
2875/720
2780/690
2860/705
2900/720
2940/730
2920/725
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
078 408-E
078 409-E
088 409-E
088 410-E
098 411-E
098 412-E
108 410-E
118 406-E
138 415-E
138 416-E
400 V 50 Hz
0.55/0.25 M3ARF 90 S
0.75/0.37 M3ARF 90 L
1.1/0.55 M3ARF 100 LA
1.5/0.75 M3ARF 100 LB
1.8/0.9 M3ARF 112 M
2.5/1.3 M3ARF 132 S
3.3/1.7 M3ARF 132 M
1450/700
1450/700
1460/710
1440/700
1460/715
1480/735
1470/725
098 407-E
098 408-E
108 406-E
108 407-E
118 404-E
138 407-E
138 408-E
400 V 50 Hz
0.11/0.06 M3VRF 63 B
0.18/0.11 M3VRF 71 A
0.3/0.15 M3VRF 71 B
0.45/0.25 M3VRF 80 A
0.63/0.33 M3VRF 80 B
0.75/0.37 M3VRF 80 C
0.7/0.37 M3ARF 90 S
1.1/0.55 M3ARF 90 L
1.5/0.75 M3ARF 100 LA
2/0.95
M3ARF 100 LB
2.5/1.5 M3ARF 112 M
3.8/1.9 M3ARF 132 S
5/2.5
M3ARF 132 M
8/4.5
M3ARF 160 M
12/7
M3ARF 160 L
1390/660
1380/680
1400/700
1380/700
1380/705
1390/710
1420/700
1390/685
1440/710
1440/710
1410/705
1450/730
1455/730
1440/730
1445/730
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 404-C
078 406-E
078 407-E
088 406-E
088 407-E
088 408-E
098 409-E
098 410-E
108 408-E
108 409-E
118 405-E
138 409-E
138 410-E
168 410-E
168 411-E
Efciency
%
Power
factor
cos
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
10
10
24
24
35
35
44
86
130
130
1/1.3
1/1.6
1.3/2
1.4/2.2
2.3/1.3
1.8/1.2
1.7/1.3
2.4/1.6
2.6/1.2
2.2/1.3
14/14
9.5/9.2
10.9/9.6
7.3/7.1
14/14
8/8
8.3/7.4
11.8/11
14/12
10.7/8.8
52/36
68/41
60/38
65/40
71.2/46.3
71/52
80/54
78/62
81/72
82/74
35
35
44
44
86
130
130
1.3/1.4
1.4/1.5
1.2/1.2
1.3/1.2
1.2/1.6
1.6/1.4
1.6/1.4
10.3/9.7
7.1/7
6.9/6.8
5.1/5
7.3/7.1
9.3/8.8
7/6.7
62/51
66/57
68/62
72/60
77/65
80/67
81/71
7.5
10
10
24
24
24
35
35
44
44
86
130
130
230
230
1.6/2.5
1.9/2.2
2/2.5
1.7/2.1
1.7/2.2
1.9/2.5
1.6/1.6
1.4/1.5
1.4/1.5
1.4/1.6
1.4/1.5
1.4/1.3
1.7/2
1.3/1.4
1.5/1.4
10/8.6
9.7/7.8
5.9/5.9
6.5/6
4/3.9
3.6/3.5
7.4/6.9
4.7/4.7
5/5
4.2/3.8
5/4.2
6/6
4.6/4.6
4.3/3.9
2.9/2.5
54/33
54/37
60/47
65/48
67/50
70/52
72/50
70/55
76/62
78/64
78/67
82/70
85/73
84.5/79.5
86.5/81
0.94/0.7
0.87/0.65
0.87/0.58
0.87/0.58
0.8/0.51
0.92/0.62
0.93/0.64
0.87/0.55
0.95/0.52
0.94/0.62
0.75/0.35
0.9/0.5
1.4/0.8
1.65/0.95
1.9/1.1
2.9/1.5
3.5/2.1
4.9/2.5
6.2/3.7
8.3/4.1
2.9/1.9
2.8/2
3.2/2.3
3.8/2.5
5.7/2.4
4.5/2.3
5.3/2.6
7/3.5
9.5/4.3
8.6/4
0.00066
0.00089
0.0013
0.0016
0.0043
0.0043
0.0082
0.015
0.0215
0.03
7
8
12.5
13
23
23
35
42
65
77
3.6/3.4
4.9/5
7.2/7.4
9.8/10
11.7/12
16.2/17
21.4/22.4
1)
0.86/0.86
1.26/1.3
1.78/1.64
2.55/2.45
2.5/2.4
4.4/4.5
6.6.2007
7.2/7.8
10.7/12.4
14.4/17.1
braking
TB
TS/TN
Nm
0.78/0.59
0.75/0.57
0.77/0.61
0.82/0.6
0.76/0.66
0.79/0.56
0.79/0.58
1.9/1.2
2.2/1.7
3.1/2.2
3.7/2.9
4.4/3
5.8/6
7.5/6
4.2/2.3
4.1/2.5
4.2/2.6
4.6/2.7
6.5/4
6/3.7
7/4.2
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
20
23
32
35
45
61
79
0.75/0.87
1.24/1.54
2.05/2.05
3.12/3.42
4.37/4.48
5.16/4.98
4.7/5.1
7.4/7.5
10/10
13/12
16.9/20.3
25/24.9
32.8/32.7
53/59
79/92
0.6/0.49
0.7/0.53
0.74/0.51
0.87/0.58
0.88/0.56
0.86/0.51
0.8/0.57
0.84/0.58
0.85/0.57
0.86/0.55
0.9/0.66
0.84/0.52
0.88/0.52
0.86/0.6
0.87/0.59
0.5/0.55
0.7/0.8
0.9/0.9
1.15/1.3
1.55/1.7
1.8/2
1.8/1.9
2.6/2.6
3.4/3.2
4.4/4
5.1/4.9
7.7/7.6
9.6/9.6
16/13.5
23/21
3/1.7
3.2/2.5
3.2/2.6
3.5/2.7
3.5/2.8
3.9/2.9
4.4/2.3
4.1/2.3
4.6/2.8
4.8/2.9
5.5/4.1
5.6/3.7
6.9/4.8
4.5/3.4
5/3.5
0.00026
0.00066
0.00089
0.0019
0.0022
0.0025
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
0.089
0.119
5.5
7
8
11
12
12.5
20
23
32
35
45
61
79
129
139
Braking-torque ratio
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement (pos 12):
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
A
Motor
Motor
size
63-132
160
50 Hz
220 V
D
Motor
Brake
(input rectier
voltage/brake voltage)
220 V/205 V d.c.
Motor
size
50 Hz
Brake
(input rectier
voltage/brake voltage)
63-132
160
380-400 V
400 V
B
Motor
50 Hz
380 V
E
Motor
Brake
(input rectier
voltage/brake voltage)
380 V/178 V d.c.
S
Motor
220-230 V
230 V
Brake
(input rectier
voltage/brake voltage)
220-230 V/205 V d.c.
230 V/205 V d.c.
50 Hz
Brake
(input rectier
voltage/brake voltage)
500 V
500 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
207
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
Product code
M3VRS 63 A
M3VRS 63 MA
M3VRS 63 B
M3VRS 63 MB
M3VRS 71 A
M3VRS 71 B
M3VRS 80 A
M3VRS 80 B
M3ARS 90 S
M3ARS 90 L
M3ARS 100 L
M3ARS 112 M
M3ARS 132 SA
M3ARS 132 SB
M3ARS 160 MA
M3ARS 160 M
M3ARS 160 L
M3ARS 180 M
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
1)
2)
3)
3)
3)
3)
3)
3)
3)
M3VRS 63 BB
M3VRS 71 BB
M3VRS 71 BC
M3VRS 80 C
M3ARS 90 LB
M3ARS 100 LB
M3ARS 112 MB
M3ARS 132 SBB
M3ARS 132 SC
M3ARS 160 LB
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
K1)
100% 75%
3.1
2.4
3.3
2.3
3.9
3.7
3.6
3.5
3.0
3.0
3.6
3.0
3.4
3.6
2.5
2.5
2.7
3.2
12.5
7.3
8.33
5.2
7.69
5.26
9.6
6.48
7.0
4.6
4.4
6.41
7.06
5.17
5.55
4.1
3.3
2.8
73.7
64.0
77.5
68.0
77.1
79.2
81.2
81.4
80.1
83.6
86.0
86.0
86.0
88.0
88.4
89.4
90.4
91.5
2.2
3.3
3.2
3.1
3.0
3.6
2.9
3.5
3.3
2.6
5.76
4.34
3.84
4.7
3.9
3.38
4.67
4.18
3.51
2.77
73.6
78.9
78.5
82.4
80.7
85.0
86.5
86.0
87.0
92.1
400 V 50 Hz
061 451-C
061 461-C
061 452-C
061 462-C
071 451-E
071 452-E
081 451-E
081 452-E
091 451-E
091 452-E
101 451-E
111 451-E
131 451-E
131 452-E
161 461-E
161 462-E
161 463-E
181 461-E
Efciency
2820
2800
2810
2800
2840
2830
2870
2850
2870
2880
2900
2850
2855
2860
2915
2900
2915
2925
0.62
0.62
0.87
0.86
1.25
1.86
2.49
3.69
5.0
7.5
10
13.4
18.4
25.1
36
49
60
72
2800
2800
2800
2840
2860
2900
2855
2825
2835
2920
1.29
2.33
2.57
5.13
9.0
13
18.4
31.1
37
72
Current
IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
3500
3500
3500
3500
2600
2600
2000
2000
1300
1200
1000
500
600
500
200
200
200
120
0.00023
0.00022
0.00026
0.00028
0.00051
0.0006
0.00074
0.00078
0.021
0.0026
0.00453
0.01078
0.01657
0.01857
0.05096
0.05596
0.06396
0.06264
4.9
5
5.4
6
7
8
11
12
19
22
32
38
57
62
124
134
139
158
3500
2400
2400
1800
1200
1000
500
500
500
200
0.00027
0.0006
0.0006
0.00111
0.0029
0.00543
0.01273
0.02457
0.02383
0.06896
5.9
8
8
13
24
36
66
77
77
145
IS/IN c/h2)
Basic design
3.5
2.3
3.6
2.2
3.8
3.6
2.9
2.3
2.4
2.7
2.7
2.8
3.2
3.4
2.1
2.3
2.5
3.0
70.6
63.0
75.8
66.0
76.5
78.2
79.3
79.5
76.2
83.9
84.1
86.2
86.6
86.2
88.0
89.7
90.7
91.7
400 V 50 Hz
061 453-C
071 453-E
071 454-E
081 453-E
091 453-E
101 452-E
111 452-E
131 454-E
131 453-E
161 454-E
Power
factor
cos
0.64
0.80
0.71
0.83
0.72
0.76
0.75
0.78
0.82
0.87
0.88
0.91
0.88
0.89
0.88
0.90
0.91
0.89
0.56
0.51
0.66
0.64
1.0
1.35
1.8
2.5
3.35
4.37
5.95
7.4
10.5
13.9
20.5
27
32.5
39
4.2
4.2
4.5
4.2
5.5
5.7
6.2
6.1
5.5
7.0
7.5
7.5
7.8
8.5
6.1
6.0
6.7
8.0
High-output design
2.3
3.2
3.1
2.8
2.6
2.7
2.7
3.2
3.2
2.6
73.1
77.4
77.9
82.2
83.5
84.3
87.1
88.2
87.4
0.81
0.82
0.85
0.83
0.86
0.86
0.93
0.93
0.93
0.91
0.9
1.59
1.7
3.16
5.7
8.1
9.9
16.6
19.6
38
3.5
5.2
5.1
5.5
7.0
7.5
7.3
7.3
8.0
7.1
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
220-240 V 250-280 V
380-420 VY 440-480 VY
230 V 265 V
400 VY 460 VY
380-420 V 440-480 V
660-690 VY
400 V
690 VY
460 V
160-180
230 V
400 VY
230 V 265 V
400 VY 460 VY
400 V
690 VY
400 V
690 VY
460 V
208
265 V
460 VY
460 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
Product code
M3VRS 63 A
M3VRS 63 MA
M3VRS 63 B
M3VRS 63 MB
M3VRS 71 A
M3VRS 71 B
M3VRS 80 A
M3VRS 80 B
M3ARS 90 S
M3ARS 90 L
M3ARS 100 LA
M3ARS 100 LB
M3ARS 112 M
M3ARS 132 S
M3ARS 132 M
M3ARS 160 M
M3ARS 160 L
M3ARS 180 M
M3ARS 180 L
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
1)
2)
3)
3)
3)
3)
3)
3)
3)
3)
M3VRS 63 BB
M3VRS 71 BB
M3VRS 71 C
M3VRS 80 C
M3ARS 90 L
M3ARS 90 LB
M3ARS 100 LC
M3ARS 112 MB
M3ARS 132 MBA
M3ARS 132 MB
M3ARS 160 LB
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
K1)
100% 75%
9.37
5.4
5.76
3.6
5.88
4.0
6.31
4.7
4.66
3.5
2.93
2.2
3.23
3.59
2.63
3.2
2.3
1.9
1.6
63.7
54.0
65.6
61.0
70.4
74.6
75.3
78.2
77.5
80.3
83.0
85.0
84.5
87.0
88.0
88.4
90.0
90.4
91.1
400 V 50 Hz
062 451-C
062 461-C
062 452-C
062 462-C
072 451-E
072 452-E
082 451-E
082 452-E
092 451-E
092 452-E
102 451-E
102 452-E
112 451-E
132 451-E
132 452-E
162 461-E
162 462-E
182 461-E
182 462-E
Efciency
1400
1365
1380
1380
1410
1420
1390
1410
1410
1420
1430
1430
1435
1450
1450
1465
1460
1455
1460
0.82
0.84
1.25
1.25
1.71
2.51
3.75
5.08
7.5
10
15
20
26.6
36.2
49.4
72
98
121
144
1370
1390
1410
1410
1390
1390
1420
1425
1450
1450
1450
1.75
3.11
3.74
6.44
13
15
27
36.9
60
72
122
Current
IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
7100
7100
7100
7100
6500
6500
5000
5000
3200
3200
2700
2700
2500
1800
1400
500
500
360
360
0.00029
0.00026
0.00036
0.00033
0.00081
0.00104
0.00128
0.00159
0.0034
0.0045
0.00733
0.00863
0.01578
0.03357
0.04057
0.07696
0.08796
0.10464
0.12964
5
5
5.5
5
7
8
11
12
19
22
32
35
40
60
68
117
129
161
175
7100
6500
6500
500
3200
3200
2700
2500
1400
500
500
0.0004
0.00104
0.00125
0.00197
0.0045
0.0048
0.009
0.018
0.05
0.05
0.107
6
8
9
13
22
23
36
47
83
83
143
IS/IN c/h2)
Basic design
2.6
2.0
2.5
2.2
2.7
2.6
2.6
3.5
2.2
2.4
2.4
2.5
2.9
2.2
2.5
2.4
2.8
2.6
3.0
2.6
2.3
2.6
2.4
2.9
2.8
2.9
3.9
2.7
2.9
2.9
2.9
3.1
3.0
3.2
3.0
2.8
2.9
3.1
58.4
52.0
62.1
57.0
69.1
72.1
73.1
75.6
76.4
78.1
82.7
83.9
83.9
87.7
88.6
88.8
90.5
90.4
91.5
400 V 50 Hz
062 453-C
072 453-E
072 454-E
082 453-E
092 453-E
092 454-E
102 453-E
112 452-E
132 454-E
132 453-E
162 453-E
Power
factor
cos
0.59
0.66
0.64
0.63
0.71
0.69
0.76
0.74
0.81
0.79
0.81
0.81
0.80
0.83
0.83
0.78
0.82
0.84
0.82
0.46
0.49
0.63
0.68
0.74
1.05
1.4
1.9
2.59
3.45
4.8
6.48
8.6
11.1
14.8
22.5
29
35
42
3.1
2.8
3.1
3.2
4.3
4.4
4.6
4.7
5.0
5.0
5.5
5.5
7.0
7.3
7.9
6.9
7.2
7.0
8.0
High-output design
2.5
2.1
2.7
2.9
2.2
2.2
2.5
2.8
2.0
2.5
2.9
2.1
2.3
2.9
3.3
2.4
2.4
2.8
3.1
2.8
2.7
2.9
4.28
3.22
2.7
3.75
2.69
2.33
1.62
2.14
2.14
1.79
1.88
70.3
75.5
77.3
78.9
79.5
80.3
81.0
84.5
88.0
88.0
90.5
67.4
75.3
76.9
77.9
78.1
81.0
81.7
83.5
88.6
89.4
88.9
0.67
0.76
0.73
0.75
0.80
0.83
0.82
0.83
0.85
0.86
0.84
0.78
1.15
1.45
2.35
4.4
4.85
8.65
11.4
17.8
21
36
3.2
4.1
4.8
4.3
4.5
4.5
5.5
7.1
7.3
8.3
6.9
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
220-240 V 250-280 V
380-420 VY 440-480 VY
230 V 265 V
400 VY 460 VY
380-420 V 440-480 V
660-690 VY
400 V
690 VY
460 V
160-180
230 V
400 VY
230 V 265 V
400 VY 460 VY
400 V
690 VY
400 V
690 VY
460 V
265 V
460 VY
460 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
209
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
Product code
M3VRS 63 A
M3VRS 63 B
M3VRS 63 MB
M3VRS 71 A
M3VRS 71 B
M3VRS 80 A
M3VRS 80 B
M3ARS 90 S
M3ARS 90 L
M3ARS 100 L
M3ARS 112 M
M3ARS 132 S
M3ARS 132 MA
M3ARS 132 MB
M3ARS 160 M
M3ARS 160 L
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
1)
2)
3)
3)
3)
3)
3)
3)
M3VRS 63 BB
M3VRS 71 C
M3ARS 90 LB
M3ARS 100 LC
M3ARS 112 MB
M3ARS 132 MC
M3ARS 160 LB
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
K1)
100% 75%
7.5
5.76
3.5
5.26
3.84
6.15
4.06
4.66
3.18
2.93
3.85
4.36
3.27
2.36
3.14
2.13
47.1
56.0
56.0
61.1
64.9
72.9
73.3
71.5
74.4
80.0
80.5
84.5
85.5
86.0
89.3
89.8
400 V 50 Hz
063 451-C
063 452-C
063 462-C
073 451-E
073 452-E
083 451-E
083 452-E
093 451-E
093 452-E
103 451-E
113 451-E
133 451-E
133 452-E
133 453-E
163 451-E
163 452-E
Efciency
910
860
860
920
920
925
925
930
930
950
940
960
960
955
970
970
0.95
1.27
1.27
1.88
2.61
3.82
5.68
7.5
11
15
22.3
29.8
39.7
55
74
109
900
920
910
940
935
960
960
1.61
3.33
13.5
22
30.6
64
139
Current
IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
7700
7700
7700
7500
7500
7000
7000
3800
3900
3300
3200
2400
1900
1900
600
600
0.0003
0.00037
0.00033
0.00078
0.00096
0.00186
0.0022
0.0034
0.0045
0.0086
0.015
0.033
0.04
0.047
0.087
0.127
5
5.5
5
7
8
11
12
19
22
34
40
59
66
74
129
149
7700
7500
3800
3300
3200
2400
1900
0.00042
0.00125
0.005
0.009
0.018
0.051
0.147
6
9
24
37
46
79
164
IS/IN c/h2)
Basic design
2.1
1.8
1.8
2.1
2.5
3.1
2.9
1.9
2.1
1.9
2.1
2.0
2.0
2.2
2.0
2.2
2.1
2.2
2.2
2.2
2.7
3.4
3.1
2.3
2.4
2.3
2.7
2.6
2.8
2.8
2.8
2.9
42.5
53.5
50.0
57.7
62.3
70.8
71.9
70.7
72.5
77.0
79.3
82.7
83.1
85.0
88.4
88.5
400 V 50 Hz
063 453-C
073 453-E
093 453-E
103 452-E
113 452-E
133 454-E
163 453-E
Power
factor
cos
0.56
0.55
0.55
0.69
0.65
0.72
0.71
0.67
0.69
0.71
0.74
0.75
0.78
0.78
0.79
0.78
0.51
0.56
0.56
0.64
0.86
1.04
1.55
2.36
3.25
3.92
5.4
6.9
8.7
11.9
15.4
23
2.1
2.4
2.5
2.9
3.2
3.8
3.4
4.0
4.0
4.5
5.6
6.1
7.1
6.9
6.7
7.1
High-output design
2.2
2.6
1.9
1.9
2.0
2.0
2.7
2.3
2.8
2.2
2.3
2.7
2.7
3.1
4.68
3.1
2.59
2.0
2.81
2.01
1.65
56.9
64.8
69.0
77.0
80.0
85.0
89.1
52.1
61.6
69.0
72.8
79.9
84.5
84.5
0.54
0.63
0.71
0.71
0.76
0.75
0.77
0.74
1.15
3.85
5.9
7.2
14.8
29.5
2.2
3.2
4.0
4.5
5.5
6.6
7.6
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
220-240 V 250-280 V
380-420 VY 440-480 VY
230 V 265 V
400 VY 460 VY
380-420 V 440-480 V
660-690 VY
400 V
690 VY
460 V
160-180
230 V
400 VY
230 V 265 V
400 VY 460 VY
400 V
690 VY
400 V
690 VY
460 V
210
265 V
460 VY
460 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Torque
rated braking
Speed TN
TB
TS/
r/min Nm
Nm TN
Product code
1)
2)
Efciency
K1)
100% 75%
9.4
7.69
5.88
9.6
6.85
7.0
4.66
4.4
2.93
4.17
4.45
3.26
4.39
3.17
2.31
38.3
45.8
46.4
59.9
70.7
61.5
62.9
72.0
73.0
74.5
80.5
82.0
84.1
84.7
86.3
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
064 451-C
074 451-E
074 452-E
084 451-E
084 452-E
094 451-E
094 452-E
104 451-E
104 452-E
114 451-E
134 451-E
134 452-E
164 451-E
164 452-E
164 453-E
680
690
690
700
700
700
690
700
700
695
720
720
715
710
715
0.78
1.25
1.67
2.46
3.52
5.0
7.5
10
15
20.6
29.2
39.8
54
74
100
Power
factor
cos
Current
IN
A
IS/IN c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
Foot
mounted
kg
0.00037
0.00078
0.00096
0.0022
0.00245
0.0034
0.0045
0.0073
0.0086
0.016
0.04
0.047
0.11
0.11
0.127
5.5
7
8
11
12
19
22
31
34
41
66
73
139
139
154
Basic design
2.1
2.3
2.5
3.2
2.9
1.9
1.7
2.1
2.1
1.9
1.6
1.8
2.1
2.4
2.4
2.1
2.3
2.5
3.6
3.1
2.4
2.1
2.7
2.7
2.4
2.5
2.5
2.4
2.6
2.8
31.8
37.5
38.1
54.5
67.4
43.4
56.4
63.6
68.8
75.9
77.8
79.2
81.1
75.0
82.4
0.48
0.57
0.55
0.60
0.62
0.56
0.57
0.59
0.64
0.65
0.67
0.68
0.69
0.70
0.70
0.45
0.52
0.69
0.75
0.85
1.6
2.35
2.55
3.35
4.5
5.9
7.8
10
13.4
18.1
1.8
2.2
2.2
3.1
3.1
3.0
3.0
3.5
3.5
4.1
5.3
5.5
5.2
5.4
5.4
7700
7500
7500
7500
7500
4100
4100
3600
3700
3600
3000
2600
600
600
600
Braking-torque ratio
No-load (shaft-free) operations/hour
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
220-240 V 250-280 V
380-420 VY 440-480 VY
230 V 265 V
400 VY 460 VY
380-420 V 440-480 V
660-690 VY
400 V
690 VY
460 V
160-180
230 V
400 VY
230 V 265 V
400 VY 460 VY
400 V
690 VY
400 V
690 VY
460 V
265 V
460 VY
460 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
211
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
1.1/0.55
1.5/0.75
2/1
2.6/1.3
4.4/2.2
5.6/2.8
2900/1450
2900/1450
2900/1460
2900/1460
2925/1450
2885/1440
M3ARS 90 S
M3ARS 90 L
M3ARS 100 L
M3ARS 112 M
M3ARS 132 SB
M3ARS 132 M
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
098 451-E
098 452-E
108 451-E
118 451-E
138 451-E
138 452-E
3.6/3.6
4.9/4.9
6.5/6.5
8.6/8.5
14.4/14.5
18.5/18.6
400 V 50 Hz
0.2/0.15 M3VRS 63 A
0.3/0.2 M3VRS 63 B
0.37/0.25 M3VRS 71 A
0.48/0.31 M3VRS 71 B
0.55/0.37 M3VRS 71 C
0.63/0.5 M3VRS 80 A
0.85/0.65 M3VRS 80 B
1.1/0.8 M3VRS 80 C
1.3/1
M3ARS 90 S
1.9/1.5 M3ARS 90 L
2.5/2.1 M3ARS 100 LA
3.4/2.5 M3ARS 100 LB
4.26
M3ARS 112 M
6.3/4.4 M3ARS 132 SA
4.7/3.1 M3ARS 132 SB
8/6.2
M3ARS 132 SC
7.2/4.8 M3ARS 132 M
9.6/7
M3ARS 132 MD
12.5/9
M3ARS 160 M
15/10.5 M3ARS 160 L
2800/1400
2740/1370
2700/1390
2780/1400
2800/1400
2690/1400
2725/1405
2730/1410
2730/1400
2820/1420
2800/1430
2810/1430
2865/1430
2895/1445
2820/1420
2910/1440
2870/1435
2900/1440
2890/1440
2900/1445
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 451-C
068 452-C
078 451-E
078 452-E
078 453-E
088 451-E
088 452-E
088 453-E
098 453-E
098 454-E
108 452-E
108 453-E
118 452-E
138 461-E
138 453-E
138 462-E
138 454-E
138 453-E
168 454-E
168 455-E
0.68/1.02
1.05/1.4
1.3/1.72
1.66/2.15
1.87/2.52
2.25/3.42
2.99/4.43
3.8/5.38
4.5/6.8
6.4/20.1
8.5/20.1
11.5/18
13.3/17.4
20.8/29
15.9/20.8
26.2/41.1
24/31.9
31.6/46.4
41/60
49/69
400 V 50 Hz
0.11/0.08 M3VRS 63 B
0.3/0.2 M3VRS 71 A
0.37/0.22 M3VRS 71 B
0.43/0.28 M3VRS 80 A
0.58/0.37 M3VRS 80 B
0.8/0.5 M3ARS 90 S
1.2/0.75 M3ARS 90 L
1.5/0.9 M3ARS 100 LA
1.8/1.1 M3ARS 100 LB
2.6/1.7 M3ARS 112 M
3.3/2.2 M3ARS 132 S
3.3/2.2 M3ARS 132 M
5.5/3.7 M3ARS 132 MD
7.5/5.5 M3ARS 160 M
11.5/8.5 M3ARS 160 L
1390/860
1390/900
1380/900
1380/910
1390/920
1430/940
1430/940
1440/960
1460/960
1445/960
1470/980
1470/980
1460/960
1465/965
1465/965
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 453-C
078 454-E
078 455-E
088 454-E
088 455-E
098 455-E
098 456-E
108 454-E
108 455-E
118 453-E
138 455-E
138 456-E
138 464-E
168 456-E
168 457-E
0.75/0.88
1.37/0.79
2.07/1.91
2.54/3.02
4/3.85
5.3/5
8/7.6
9.9/8.9
11/11
17.2/16.9
21.4/21.4
29.2/29.2
36/36.8
49/54
75/84
braking
TB
TS/TN
Nm
1)
Efciency
%
Power
factor
cos
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
1.4/1.5
1.5/1.5
1.9/1.4
1.6/1.6
2/1.3
1.8/1.4
7.1/7.1
9.7/9.7
7.7/7.7
10/9.9
8.1/8.1
10.4/10
74/62
77/70
76/67
80/75
81/74
82/77
0.85/0.64
0.87/0.67
0.89/0.66
0.92/0.72
0.86/0.73
0.93/0.75
7.5
7.5
10
10
10
24
24
24
35
35
44
44
86
130
130
130
130
130
200
200
2.1/2
1.7/2.1
1.9/1.5
1.4/2
1.8/1.9
1.8/1.9
1.9/2
2/2
2/1.5
2.8/2
2.2/1.6
2.2/1.9
1.8/2.3
1.7/1.6
1.8/2.2
1.9/1.6
2.4/2.5
1.8/1.7
1.4/1.8
1.6/2.1
11/7.4
7.1/5.4
9.2/7
7.1/5.6
6.4/4.8
7.6/5.5
5.4/3.6
4.7/3.3
7.8/5.1
63/54
0.7/0.63
59/55
0.78/0.63
64/60
0.89/0.79
68/68
0.91/0.76
66/64
0.8/0.65
66/67
0.87/0.79
70/70
0.88/0.8
72/71
0.88/0.79
71/71
0.88/0.8
74/75
0.82/0.76
68/76
0.88/0.81
78/80
0.88/0.85
82/77
0.93/0.76
85/84
0.94/0.8
79/77
0.92/0.76
87/85
0.95/0.83
84/81
0.92/0.76
87/85
0.95/0.85
85.5/85.5 0.93/0.8
87/86
0.93/0.77
2.5/2
3.3/2.4
4.3/3.3
5.1/3.5
9.1/5.9
10.6/7
5.1/3.6
5.7/4.1
6.2/4
6.4/5
7.3/4.5
6.7/5
0,0019
0,0024
0,0041
0,012
0,016
0,022
20
23
32
45
55
76
5.9/3.6
4.3/2.7
10/9.9
7.2/5.2
10.4/10
6.9/3.6
6.3/4.7
4.7/3.2
5.6/3.8
4.7/3.3
0.65/0.65
0.95/0.85
0.95/0.7
1.2/0.9
1.5/1.2
1.6/1.35
2/1.7
2.55/2.05
3.1/2.6
4.4/3.9
6/5
7.2/5.9
7.6/6.5
11.4/9.5
9.2/7.7
14/12.7
13.3/11.5
16.8/14.1
22.5/19
27/23
3.6/2.8
2.8/2.8
3.3/3.1
3.6/4
4.7/4.3
3.6/4.2
4/4.4
4.2/4.7
3.9/3.8
5.1/4.4
4.8/4.4
5.3/5.4
6.3/6.2
6.5/5.7
5.5/5.7
7.8/5.6
7.1/6.2
7.6/5.9
5.2/4.6
5.8/4.9
0.00019
0.00026
0.00066
0.00089
0.0011
0.0013
0.0016
0.002
0.0032
0.0043
0.0069
0.0082
0.012
0.0155
0.016
0.0215
0.022
0.026
0.054
0.057
5
5.5
7
8
8.5
11
12.5
13
20
23
32
35
45
58
55
78
76
85
129
139
1.4/1.8
1.1/1.05
1/1.1
1.5/1.4
1.5/1.5
1.5/1.4
1.7/1.5
1.5/1.5
2.1/1.6
1.5/1.5
1.4/1.2
1.4/1.5
1.9/1.8
2.1/1.8
2.1/1.8
10/8.5
15.2/8.8
6.3/5.8
7.1/6
4/3.5
4.6/4.4
7/6.6
5.6/5.1
4.5/4.5
5/4.9
4.2/4.2
7/7
5.1/5.1
2.9/2.7
3.1/2.7
40/25
0.7/0.72
51/40
0.82/0.72
58/40
0.83/0.8
60/54
0.85/0.81
63/58
0.85/0.8
68/57
0.8/0.66
73/63
0.81/0.67
75/69
0.84/0.65
77/70
0.78/0.64
80/70
0.85/0.76
82/76
0.8/0.65
82/77
0.81/0.7
85/81
0.88/0.8
85.5/80.5 0.83/0.77
86.5/82.5 0.84/0.76
0.55/0.62
0.7/0.5
0.9/0.8
1.4/1.2
1.6/1.15
2.2/2
3/2.6
3.5/3
4.4/3.6
5.5/4.4
7.1/6.4
9.8/8
10.7/8.3
15.5/13
23/19.5
2.5/1.8
2.8/2
2.7/1.9
3.1/2.9
3.3/3.2
3.9/2.8
4.4/3.1
4.7/3.8
5.8/3.9
5.9/5.2
6.8/4.6
7.2/5.6
8/6.3
7.1/4.7
7/4.9
0.00026
0.00066
0.00089
0.0019
0.0022
0.0032
0.0043
0.0069
0.0082
0.018
0,038
0,048
0,036
0,089
0,119
5.5
7
8
12
12.5
20
23
32
35
45
61
79
84
129
139
Braking-torque ratio
212
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
0.25/0.06 M3VRS 71 A
0.37/0.09 M3VRS 71 B
0.5/0.12 M3VRS 80 A
0.66/0.15 M3VRS 80 B
0.75/0.18 M3ARS 90 LA
1.3/0.33 M3ARS 90 LB
1.8/0.5 M3ARS 100 LB
2.2/0.59 M3ARS 112 MC
3.3/0.95 M3ARS 132 SA
4.4/1.3 M3ARS 132 MC
078 458-E
078 459-E
088 459-E
088 460-E
098 461-E
098 462-E
108 460-E
118 456-E
138 465-E
138 466-E
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
078 458-E
078 459-E
088 459-E
088 460-E
098 461-E
098 462-E
108 460-E
118 456-E
138 465-E
138 466-E
2760/660
2800/660
2730/700
2780/700
2875/720
2780/690
2860/705
2900/720
2940/730
2920/725
400 V 50 Hz
0.55/0.25 M3ARS 90 S
0.75/0.37 M3ARS 90 L
1.1/0.55 M3ARS 100 LA
1.5/0.75 M3ARS 100 LB
1.8/0.9 M3ARS 112 M
2.5/1.3 M3ARS 132 S
3.3/1.7 M3ARS 132 M
1450/700
1450/700
1460/710
1440/700
1460/715
1480/735
1470/725
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
098 457-E
098 458-E
108 456-E
108 457-E
118 454-E
138 457-E
138 458-E
3.6/3.4
4.9/5
7.2/7.4
9.8/10
11.7/12
16.2/17
21.4/22.4
400 V 50 Hz
0.11/0.06 M3VRS 63 B
0.18/0.11 M3VRS 71 A
0.3/0.15 M3VRS 71 B
0.45/0.25 M3VRS 80 A
0.63/0.33 M3VRS 80 B
0.75/0.37 M3VRS 80 C
0.7/0.37 M3ARS 90 S
1.1/0.55 M3ARS 90 L
1.5/0.75 M3ARS 100 LA
2/0.95
M3ARS 100 LB
2.5/1.5 M3ARS 112 M
3.8/1.9 M3ARS 132 S
5/2.5
M3ARS 132 M
8/4.5
M3ARS 160 M
12/7
M3ARS 160 L
1390/660
1380/680
1400/700
1380/700
1380/705
1390/710
1420/700
1390/685
1440/710
1440/710
1410/705
1450/730
1455/730
1440/730
1445/730
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 454-C
078 456-E
078 457-E
088 456-E
088 457-E
088 458-E
098 459-E
098 460-E
108 458-E
108 459-E
118 455-E
138 459-E
138 460-E
168 460-E
168 461-E
0.75/0.87
1.24/1.54
2.05/2.05
3.12/3.42
4.37/4.48
5.16/4.98
4.7/5.1
7.4/7.5
10/10
13/12
16.9/20.3
25/24.9
32.8/32.7
53/59
79/92
braking
TB
TS/TN
Nm
Efciency
%
1)
Power
factor
cos
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
1/1.3
1/1.6
1.3/2
1.4/2.2
2.3/1.3
1.8/1.2
1.7/1.3
2.4/1.6
2.6/1.2
2.2/1.3
14/14
9.5/9.2
10.9/9.6
7.3/7.1
14/14
8/8
8.3/7.4
11.8/11
14/12
10.7/8.8
52/36
0.94/0.7
68/41
0.87/0.65
60/38
0.87/0.58
65/40
0.87/0.58
71.2/46.3 0.8/0.51
71/52
0.92/0.62
80/54
0.93/0.64
78/62
0.87/0.55
81/72
0.95/0.52
82/74
0.94/0.62
35
35
44
44
86
130
130
1.3/1.4
1.4/1.5
1.2/1.2
1.3/1.2
1.2/1.6
1.6/1.4
1.6/1.4
10.3/9.7
7.1/7
6.9/6.8
5.1/5
7.3/7.1
9.3/8.8
7/6.7
62/51
66/57
68/62
72/60
77/65
80/67
81/71
7.5
10
10
24
24
24
35
35
44
44
86
130
130
230
230
1.6/2.5
1.9/2.2
2/2.5
1.7/2.1
1.7/2.2
1.9/2.5
1.6/1.6
1.4/1.5
1.4/1.5
1.4/1.6
1.4/1.5
1.4/1.3
1.7/2
1.3/1.4
1.5/1.4
10/8.6
9.7/7.8
5.9/5.9
6.5/6
4/3.9
3.6/3.5
7.4/6.9
4.7/4.7
5/5
4.2/3.8
5/4.2
6/6
4.6/4.6
4.3/3.9
2.9/2.5
54/33
0.6/0.49
54/37
0.7/0.53
60/47
0.74/0.51
65/48
0.87/0.58
67/50
0.88/0.56
70/52
0.86/0.51
72/50
0.8/0.57
70/55
0.84/0.58
76/62
0.85/0.57
78/64
0.86/0.55
78/67
0.9/0.66
82/70
0.84/0.52
85/73
0.88/0.52
84.5/79.5 0.86/0.6
86.5/81 0.87/0.59
0.75/0.35
0.9/0.5
1.4/0.8
1.65/0.95
1.9/1.1
2.9/1.5
3.5/2.1
4.9/2.5
6.2/3.7
8.3/4.1
2.9/1.9
2.8/2
3.2/2.3
3.8/2.5
5.7/2.4
4.5/2.3
5.3/2.6
7/3.5
9.5/4.3
8.6/4
0,00066
0,00089
0,0013
0,0016
0,0043
0,0043
0,0082
0,015
0,0215
0,03
7
8
12,5
13
23
23
35
42
65
77
1.9/1.2
2.2/1.7
3.1/2.2
3.7/2.9
4.4/3
5.8/6
7.5/6
4.2/2.3
4.1/2.5
4.2/2.6
4.6/2.7
6.5/4
6/3.7
7/4.2
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
20
23
32
35
45
61
79
3/1.7
3.2/2.5
3.2/2.6
3.5/2.7
3.5/2.8
3.9/2.9
4.4/2.3
4.1/2.3
4.6/2.8
4.8/2.9
5.5/4.1
5.6/3.7
6.9/4.8
4.5/3.4
5/3.5
0.00026
0.00066
0.00089
0.0019
0.0022
0.0025
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
0.089
0.119
5.5
7
8
11
12
12.5
20
23
32
35
45
61
79
129
139
Braking-torque ratio
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement (pos 12):
Foot-mounted
A
Flange-mounted, 1 ange B for frame sizes 63-100, 180; E for frame sizes 112-160.
Flange-mounted, 2 anges
N for frame sizes 90-132
Flange-mounted, small ange
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
A
Motor
50 Hz
Brake
50 Hz
B
Motor
50 Hz
Brake
50 Hz
S
Motor
50 Hz
Brake
50 Hz
D
Motor
50 Hz
Brake
50 Hz
63-132
160
220 V
220 V
380 V
380 V
220-230 V
230 V
230 V
230 V
380-400 V
400 V
400 V
400 V
Motor
size
E
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
160
500 V
500 V
500 V
500 V
415 V
415 V
415 V
415 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
213
Variant
M3VRF/S
M3ARF/S
63
71
80
90
100
112
132
160
180
Brakes
086
087
NA
088
Hand release
213
285
288
Brake motor with voltage code S for the motor and separate
supply of the brake for voltage corresponding to code D.
Brake motor with voltage code D for the motor and separate
supply of the brake for voltage corresponding to code S.
Brake motor with a.c. brake, change into d.c. brake keeping
the voltage code.
Brake motor with d.c. brake, change into a.c. brake keeping
the voltage code.
289
290
291
Special voltage
209
Protection
005
For other variant codes please see section for standard aluminum motors or consult ABB.
S
P
M
R
NA
=
=
=
=
=
Included as standard
New manufacture only.
On modication of a stocked motor or on new manufacture, the number per order may be limited.
On request.
Not applicable.
214
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
Sizes 63-180
Dimension drawings
IM B3 (IM 1001)
L
AC
LP
UB1
AE
UB2
GA
HL
HC
G
DB EG
HD
D
AA
BA
BC
E
HA
AB
BB
Motor
size
AA
AB
AC
AE
BA
BB
BC
DB
EG
63 A/B
63 MA/MB
71
80
90S
90 L
100 L
112 M
132 S
132 M
160 M
160 L
180
100
100
112
125
140
140
160
190
216
216
254
254
279
26
35
24
28
27
27
32
41
47
47
56
56
65.5
120
115
136
154
170
170
197
222
262
262
310
310
340
123
123
139
156
177
177
197
221
261
261
314
314
314
85
94
85
97
110
110
110
160
160
160
210
210
210
80
80
90
100
100
125
140
140
140
178
210
254
241
21
25
31
34
30
30
34
31
40
40
55
55
91
96
96
110
125
125
150
172
168
212
212
287.5
287.5
329
21
25
31
34
30
30
34
31
76
76
86
86
91
40
40
45
50
56
56
63
70
89
89
108
108
121
11
11
14
19
24
24
28
28
38
38
42
42
48
M4
M4
M5
M6
M8
M8
M10
M10
M12
M12
M16
M16
M16
23
23
30
40
50
50
60
60
80
80
110
110
110
10
10
13
16
19
19
22
22
28
28
36
36
36
Motor
size
GA
HA
HC
HD
HL
LP
UB1
UB2
63 A/B
63 MA/MB
71
80
90S
90 L
100 L
112 M
132 S
132 M
160 M
160 L
180
4
4
5
6
8
8
8
8
10
10
12
12
14
12.5
12.5
16
21.5
27
27
31
31
41
41
45
45
51.5
63
63
71
80
90
90
100
112
132
132
160
160
180
10
6
9
10
10
10
12
12
14
14
20
20
20
177
177
197
226
264
264
325
325
345
180
188
176
190
217
217
237
258
296
296
369
369
389
107
114
124
161
161
173
184
225
225
253
253
253
7
7
7
10
10
10
12
12
12
12
15
15
15
270
277
316
360
370
395
453
487
606
606
782
782
782
66
76
70
70
70
105
105
119
119
139
139
139
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M40
M40
M40
Pg11
M20
Pg16
Pg16
M25
M25
M25
M25
M25
M25
M40
M40
M40
Tolerances:
D ISO j6 ( 28 )
D ISO k6 (38-42 )
F
ISO h9
H + 0, - 0.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
215
Sizes 63-180
Dimension drawings
IM B5 (IM 3001), IM V1 (IM 3011), IM B14 (IM 3601)
L
LP
UB1
UB2
GA
HL
HB
P N
G
AC
EG
DB
D
T
45
LA
IM B5 (IM 3001)
Motor
size
AC
DB
EG
GA
HB
HL
LP
UB1
UB2
63 A/B
63 MA/MB
71
80
90S
90 L
100 L
112 M
132 S,M
160 M,L
180
123
123
139
156
178
178
198
223
264
317
317
11
11
14
19
24
24
28
28
38
42
48
M4
M4
M5
M6
M8
M8
M10
M10
M12
M16
M16
23
23
30
40
50
50
60
60
80
110
110
10
10
13
16
19
19
22
22
28
36
36
4
4
5
6
8
8
8
8
10
12
14
12.5
12.5
16
21.5
27
27
31
31
41
45
51.5
117
125
105
110
127
127
137
146
164
209
209
107
114
124
161
161
173
184
225
253
253
270
277
316
360
370
395
453
487
606
782
782
66
76
70
70
70
105
105
119
139
139
M16
M20
M20
M20
M20
M20
M20
M20
M20
M40
M40
Pg 11
M20
Pg 16
Pg16
M25
M25
M25
M25
M25
M40
M40
IM B5 (IM 3001)
Motor
size
IEC
ange
LA
63 A/B
63 MA/MB
71
80
90
100
112
132
160
160 2)
180
FF115
FF115
FF130
FF165
FF165
FF215
FF215
FF265
FF265
FF300
FF300
10
6.5
10
12
11
11
11
12
12
20
20
115
115
130
165
165
215
215
265
265
300
300
95
95
110
130
130
180
180
230
230
250
250
140
140
160
200
200
250
250
300
300
350
350
M8
M8
M8
M10
M10
M12
M12
M12
M12
M16
M16
1)
Motor
size
IEC
ange
LA
3
3
3.5
3.5
3.5
4
4
4
4
5
5
63 A/B
63 MA/MB
71
80
90
100
112 3)
132
FT75
FT75
FT85
FT100
FT115
FT130
FT130
FT165
10
10
10
10
14
16
9.5
14.5
75
75
85
100
115
130
130
165
60
60
70
80
95
110
110
130
90
90
105
120
140
160
160
200
M5
M5
M6
M6
M8
M8
M8
M8
2.5
3
2.5
3
3
3.5
3.5
3.5
Tolerances:
D ISO j6 ( 28 )
D ISO k6 (38-42 )
F
ISO h9
1)
2)
3)
Modular anges:
Brake motors sizes 71-132 can be supplied with several non
standard modular ange dimensions
216
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
63 A/B
BB
63
MA/MB
71
80
90
100
112
132
160
180
Material
Material
Cast iron
D-end
62022Z/C3
6201-2Z
62032Z/C3
62042Z/C3
62052Z/C3
63062Z/C3
62062Z/C3
62082Z/C3
63092Z/C3
63102Z/C3
N-end
62022Z/C3
6201-2Z
62032Z/C3
62042Z/C3
62052Z/C3
62062Z/C3
62062Z/C3
62082Z/C3
62092Z/C3
62092Z/C3
Axially locked
bearings
System
Bearing seals
D-end
V-ring
Radial
seal
V-ring
N-end
V-ring
V-ring
Flanges
Bearings
Lubrication
Terminal box
Material
Surface treatment
Srews
Connections
Knock-out openings
1 x M16 2xM20
+ Pg11 +1xM12
2xM20 + Pg16
2 x(M25 + M20)
2 x(M25 + M20)
2 x (M40 + M16)
2.5
10
35
Terminal box
Fan
Material
Fan cover
Material
Steel.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicallised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Stator winding
temperature sensors
Rotor winding
Optional.
Material
Die-cast aluminum.
Balancing method
Key ways
Enclosure
Cooling method
IC 411.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
217
218
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake GB 12-2004
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
219
8
PSC
Run capacitor
Single-phase motor with attached run capacitor. The
starting torque is 30 - 70%, which makes this motor
particularly suitable for applications with low starting
torque requirements, such as fans, circular saws,
polishing machines and centrifugal pumps where the
shaft seal does not require a high breakaway torque.
Basic PSC model.
220
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
PSC
for speed regulation
The motors speed can be regulated by changing the
voltage to the motor (twin-cable regulation) or by only
changing the voltage to the circuit winding (three-cable
regulation). The best regulation and the minimum loss
in the motor is achieved only by changing the voltage to
the circuit winding.
The voltage can be regulated using a tranformer or a
Triac control. The Triac control provides a greater loss in
the motor and can contribute to noise in the motor.
To achieve good speed regulation it is important that
the motor is suitable for the load. If the motor is too
large for the load the regulation range will be small;
at full speed the motor should not be loaded with less
than 80% of its full load. With correct dimensioning it
is possible to regulate speed down to approx. 30% of
nominal speed.
Speed regulation is suitable for the following applications: fans where blades are mounted directly on the
motor shaft and centrifugal pumps where the shaft seal
does not require a high breakaway torque.
Reversing
As a rule a single phase motor can only reverse when
it stops completely before the rotational direction is
changed. In CSR motors it is also important that the
capacitor is discharged before the voltage is reconnected, as otherwise the starter relay will not connect the
starter capacitor.
It is possible to design a PSC motor that is suitable
for reversing. The motor has a joint start and circuit
winding, which provides for very simple switching.
No load
Standard single phase motors cannot run idle for a long
period. The losses are greater when running idle than
at full load. If the motor is to run idle for a long period,
specially designed windings must be produced.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
221
Mechanical design
Stator
Stator framework, bearing shields and feet are made of
aluminum alloy with low copper content.
Drain holes
Motors that will be operated in very humid or wet environments, and especially under intermittent duty, should
be provided with drain holes. The appropriate IM designation, such as IM 3031, is specied on the basis of the
method of mounting the motor.
Closed
Open
Open
Open
222
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
Motor
size
Terminal box
on top
right side
left side
56-63
standard
71-100
standard
on request
on request
Connections
The terminal block is provided with 6 terminals for connecting Cu-cable. The terminals are marked in accordance with IEC 60034-8.
Connection openings
Motor
size
Opening
Metric
cable entry
Cable
diameter,
mm, min-max
Terminal
bolt size
6x
Maximum
connectable
Cu-cable area, mm2
56-63
Knock-out opening
1 x M16 x 1.5; 1 x Pg 11
5-12
M4
2.5
71-80
Knock-out opening
2 x M20 x 1.5; 1 x Pg 16
8-15
M4
90-100
Knock-out opening
11-16
M4
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
223
Bearings
The motors are provided with bearings, according to
the tables on the right.
Motor
size
D-end
N-end
56
6201-2Z/C3
6201-2Z/C3
63
6202-2Z/C3
6201-2Z/C3
71
6203-2Z/C3
6202-2Z/C3
80
6204-2Z/C3
6203-2Z/C3
90
6205-2Z/C3
6204-2Z/C3
100
6306-2Z/C3
6205-2Z/C3
Axially-locked bearings
The table on the right shows which of the motors bearings is axially locked in the bearing seat. In motor sizes
56 to 80 the locking is done by an inner bearing circlip,
in motor sizes 90 and 100 by an inner bearing cover.
1)
Motor
size
Foot-mounted
motors
Flange-mounted motors
Large ange
Small ange
56-63
On request
On request
On request
71-80
On request
D-end
On request
90-100
D-end
D-end
1)
1)
D-end 1)
Lifetime of bearing/grease
The motors are supplied with bearings that are
lubricated for life with a bearing grease for use at
normal temperatures in dry or humid environments.
The greases operating temperature is between -40 and
+160C. See also variant code 039 under the heading
Bearings and Lubrication.
The life time of the grease L10 is dened as the number
of operating hours after which 90% of the bearings are
sufcently well lubricated. 50% of the bearings can
achieve a grease life time that is twice as long.
Motor size
No. of poles
Hours
56-80
2-6
40.000
90
30.000
90
4-6
40.000
100
28.000
100
4-6
40.000
Pulley diameter
224
Where:
D
P
n
K
FR
= diameter of pulley, mm
= power requirement, kW
= motor speed, r /min
= belt tension factor, dependent on belt type and
type of duty. A common value for V belts is K= 2.5
= permissible radial force
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
Ball bearings
Length
of shaft
Motor
No. of extension
25,000 hours
40,000 hours
size
poles
E (mm)
56
20
240
260
56
20
300
200
280
200
56
6-8
20
340
280
340
280
63
2-4
30
490
400
490
400
71
2-6
30
680
570
680
570
200
200
80
2-6
40
930
750
930
750
90
2-6
50
1010
810
1010
810
100
2-6
60
2280
1800
2280
1800
Motor
size
25,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
56
63
71
470
790
985
230
390
485
520
865
1070
80
90
100
1305
1360
2805
705
930
1945
1420
1490
3075
FAZ
40,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
635
430
720
900
190
320
400
470
780
970
905
1165
2400
1185
1225
2540
585
800
1680
1285
1335
2760
6-pole
FAD
N
FAZ
N
280
465
570
540
300
1135
820
1070
2215
1505
1590
3260
6-pole
FAD
N
FAZ
N
230
380
470
480
240
1020
520
685
915
1900
1350
1415
2910
750
990
2050
FAZ
Mounting arrangement IM V1
FAD
Motor
size
25,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
56
63
71
470
790
998
230
380
470
520
875
1085
80
90
100
1320
1390
2855
685
900
1890
1445
1525
3135
40,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
620
430
725
910
190
310
385
470
790
985
880
1130
2340
1200
1225
2590
565
770
1625
1310
1370
2820
6-pole
FAD
N
FAZ
N
270
455
555
540
290
1150
790
1035
2155
1530
1625
3320
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
6-pole
FAD
N
FAZ
N
230
370
455
480
240
1035
505
655
880
1840
1375
1450
2970
725
955
1990
225
Ordering information
Sample order
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
D, E, F G
A
B
C
M3VD 80C
2
IM B3 (IM 1001)
1.4 kW
3GVD 081003-ASB
Motor type
Motor size
Product code
D Mounting arrangement code
E Voltage/frequency code
F Generation code
G Variant codes
Position 11
- (dash)
Position 3 and 4
Enclosure and stator frame material
A, V = Totally enclosed motor with aluminum stator
frame
Position 12
Mounting arrangement
A = Foot-mounted motor.
B = Flange-mounted motor.
Large ange with clearance holes.
C = Flange-mounted motor.
Small ange with threaded holes.
H = Foot- and ange-mounted motor.
Large ange with clearance holes.
J = Foot- and ange-mounted motor.
Small ange with threaded holes.
N = Flange-mounted (CI ring ange FF).
P = Foot- and ange-mounted motor.
(CI ring ange FF).
V = Flange-mounted motor. Special ange.
Position 4
Motor type
D = Single-phase motor - CSR
E = Single-phase motor - PSC
Positions 5 and 6
IEC size
05 = 56
06 = 63
07 = 71
08 = 80
09 = 90
10 = 100
Position 7
Speed (pole pairs)
1 = 2 poles
2 = 4 poles
3 = 6 poles
Positions 8 to10
Serial number
226
Position 13
Voltage/frequency code
S = 230-240 V 50 Hz.
X = Other rated voltage, connection or frequency.
Position 14
B, E = Generation code
The product code must be, if needed, followed by
variant codes.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
Output
kW
Type
designation
Product
code
Speed
r/min
Efciency
%
Power
factor
cos
Current
IN
Is
Torque
TN
Ts
Tmax
Capasitor
Start Run
Moment of
inertia
J=1/4 GD2
kgm2
IN
Nm
TN
TN
Weight
kg
230 V 50 Hz
0.18
M3VD 63 A
2820
56.5
0.92
1.6
3.3
0.61
2.0
2.0
16
0.000160
0.25
0.37
0.55
0.75
0.75
1.10
1.4
1.5
2.2
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3AD
M3AD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GAD
3GAD
2820
2855
2860
2860
2860
2860
2860
2910
2910
60.5
71.5
72.5
74.5
73.0
74.5
75.5
80.0
81.5
0.94
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
1.95
2.3
3.4
4.4
4.4
6.5
8.2
8.2
11.8
3.6
4.8
4.8
4.9
4.6
4.6
4.8
4.6
4.2
0.85
1.25
1.85
2.5
2.0
3.7
4.7
5.0
7.3
2.0
1.7
1.7
1.7
1.8
1.7
1.7
1.4
1.1
2.1
1.8
1.8
1.8
2.2
2.1
2.0
1.9
1.8
20
40
60
60
80
100
100
130
130
10
10
16
20
20
25
30
40
50
0.000360
0.000400
0.000450
0.000500
0.000722
0.000763
0.001093
0.00190
0.00240
5.5
6
7
7.5
9.5
11.5
12
13
16
1)
63 B
71 A
71 B
71 C
80 A
80 B
80 C
90 L
90 LB
061 002-B
071 001-B
071 002-B
071 003-B
081 001-B
081 002-B
081 003-B
091 202-E
091 203-E
230 V 50 Hz
0.12
M3VD 63 A
1350
49.5
0.95
1.2
3.0
0.85
1.6
1.5
16
0.000260
0.18
0.25
0.37
0.5
0.55
0.75
0.95
1.1
1.5
1.7
1.85
2.2
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3AD
M3AD
M3AD
M3AD
M3AD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GAD
3GAD
3GAD
3GAD
3GAD
1360
1410
1410
1410
1410
1410
1410
1420
1430
1430
1390
1400
55.0
64.0
67.5
68.5
70.5
72.0
73.0
76.0
79.5
79.5
76.5
79.5
0.97
0.99
0.98
0.98
0.93
0.93
0.93
0.99
0.99
0.99
0.99
0.99
1.5
1.75
2.45
3.2
3.7
4.9
6.1
6.3
8.3
9.4
10.6
12
3.0
4.3
4.5
4.5
4.0
4.1
4.1
4.0
4.3
3.4
3.0
3.2
1.25
1.7
2.5
3.4
3.7
5.1
6.1
7.35
10.0
11.5
12.7
15
1.6
1.7
1.7
1.7
1.9
2.0
1.8
1.6
1.9
1.3
1.3
1.2
1.5
1.6
1.6
1.6
1.8
1.8
1.8
1.5
1.7
1.6
1.4
1.5
20
40
60
60
60
80
80
100
130
130
100
80
6
6
8
12
16
20
16
30
40
60
50
50
0.000300
0.000660
0.000890
0.001100
0.001257
0.001565
0.001948
0.00320
0.00430
0.00480
0.00690
0.00820
5.5
6
7
7.5
9.5
11
11.5
13
16
17
21
24
63 B
71 A
71 B
71 C
80 A
80 B
80 C
90 S
90 L
90 LB
100 LA
100 LB
062 002-B
072 001-B
072 002-B
072 003-B
082 001-B
082 002-B
082 003-B
092 201-E
092 202-E
092 203-E
102 201-E
102 202-E
230 V 50 Hz
0.18
0.25
M3VD 71 A
M3VD 71 B
880
880
52.0
59.0
0.99
0.99
1.5
1.9
2.8
3.0
1.95
2.7
1.5
1.5
1.3
1.3
20
40
10
12
0.000630
0.000810
6
7
0.32
0.37
0.55
0.65
0.85
M3VD
M3VD
M3VD
M3VD
M3AD
3GVD
3GVD
3GVD
3GVD
3GAD
880
900
900
900
930
61.0
65.0
66.0
67.5
71.0
0.99
0.97
0.97
0.97
0.96
2.3
2.6
3.8
4.3
5.4
3.0
3.0
3.1
3.2
3.9
3.5
3.9
5.8
6.9
8.65
1.5
1.8
1.8
1.8
1.7
1.3
1.5
1.5
1.5
1.4
40
40
40
60
80
16
12
20
25
25
0.001100
0.001842
0.002176
0.002576
0.00430
7.5
9.5
10.5
11.5
16
1)
1)
71 C
80 A
80 B
80 C
90 L
073 003-B
083 001-B
083 002-B
083 003-B
093 202-E
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
227
Output
kW
Type
designation
Product
code
Speed
r/min
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3AE
56 A
56 B
56 BB
63 A
63 B
71 A
71 B
71 C
80 A
80 B
80 C
90 L
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3AE
M3AE
M3AE
M3AE
56 A
56 B
63 A
63 B
71 A
71 B
71 C
80 A
80 B
80 C
90 L
90 LB
100 LA
100 LB
051 001-B
051 002-B
051 003-B
061 001-B
061 002-B
071 001-B
071 002-B
071 003-B
081 001-B
081 002-B
081 003-B
091 102-E
1)
1)
M3VE
M3VE
M3VE
M3VE
M3VE
M3VE
M3AE
71 A
71 B
71 C
80 A
80 B
80 C
90 L
Tmax
TN
Moment of
Capasitor inertia
Run
J=1/4 GD2
F
kgm2
IN
Nm
TN
Weight
kg
2830
2820
2800
2820
2810
2750
2750
2750
2760
2775
2800
2850
39.0
43.0
48.0
55.0
59.5
65.5
67.5
68.5
68.5
70.5
72.0
76.5
0.86
0.84
0.95
0.90
0.94
0.97
0.97
0.97
0.96
0.96
0.97
0.99
0.87
1.15
1.15
1.6
1.95
2.6
3.7
4.3
5.0
5.8
7.4
8.7
2.5
2.6
2.5
2.9
3.0
3.0
3.0
3.2
3.5
3.7
3.9
4.2
0.22
0.31
0.41
0.61
0.85
1.3
1.95
2.25
2.6
3.1
3.75
5.1
0.4
0.35
0.4
0.5
0.6
0.6
0.6
0.6
0.4
0.45
0.4
0.4
1.9
1.8
1.3
1.9
1.8
1.7
1.7
1.7
1.6
1.6
1.7
2.0
4
4
6
8
10
12
16
20
20
25
30
40
0.000110
0.000120
0.000120
0.000160
0.000360
0.000400
0.000450
0.000500
0.000722
0.000763
0.001093
0.00240
3.5
4
4
5
5.5
6
7
7.5
9.5
11.5
12
16
0.87
0.95
0.92
0.95
0.95
0.95
0.95
0.91
0.91
0.92
0.99
0.99
0.99
0.99
0.9
1.1
1.2
1.5
2.0
2.2
2.7
4.1
4.7
5.2
7.9
9.0
10.7
12.2
2.0
1.8
1.9
1.9
2.6
2.7
3.1
3.3
3.3
3.6
2.3
2.3
2.6
3.1
0.46
0.64
0.85
1.25
1.8
2.1
2.6
3.85
4.6
4.9
9.3
10.6
12.8
14.9
1.1
1.0
0.65
0.6
0.6
0.65
0.7
0.55
0.6
0.45
0.4
0.4
0.3
0.3
1.6
1.5
1.5
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.3
1.3
1.3
1.6
4
6
6
8
12
16
20
16
20
30
30
40
50
50
0.000180
0.000180
0.000260
0.000300
0.000660
0.000890
0.001100
0.001257
0.001565
0.001948
0.00430
0.00480
0.00690
0.00820
4
4
5
5.5
6
7
7.5
9.5
11
11.5
16
17
21
24
0.96
0.96
0.96
0.91
0.92
0.90
0.99
1.25
1.7
2.2
2.5
3.0
4.5
5.1
1.8
1.9
1.9
2.5
2.5
2.5
1.8
1.35
2.1
2.8
3.2
3.9
6
8.35
0.75
0.8
0.8
0.65
0.65
0.7
0.5
1.3
1.4
1.4
1.5
1.5
1.4
1.1
8
10
12
12
12
16
30
0.000630
0.000810
0.001100
0.001842
0.002176
0.002576
0.00430
6
7
7.5
9.5
10.5
11.5
16
230 V 50 Hz
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GAE
3GAE
3GAE
3GAE
052 001-B
052 002-B
062 001-B
062 002-B
072 001-B
072 002-B
072 003-B
082 001-B
082 002-B
082 003-B
092 102-E
092 103-E
102 101-E
102 102-E
Torque
TN
Ts
230 V 50 Hz
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GAE
Efciency
%
Current
IN
Is
Power
factor
cos
1360
1340
1350
1360
1350
1360
1370
1340
1360
1410
1330
1340
1380
1400
38.0
39.0
48.5
55.0
57.5
62.0
64.0
64.0
67.0
68.0
72.0
73.0
75.5
78.5
230 V 50 Hz
3GVE
3GVE
3GVE
3GVE
3GVE
3GVE
3GAE
073 001-B
073 002-B
073 003-B
083 001-B
083 002-B
083 003-B
093 102-E
850
860
860
900
900
880
850
45.0
48.0
51.5
56.5
58.5
59.5
64.5
228
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
Output
kW
Type
designation
Product
code
M3AE 90 S
M3AE 90 L
1)
M3AE 90 L
Efciency
%
Torque
TN
Ts
Moment of
inertia
J=1/4 GD2
kgm2
IN
Nm
TN
Weight
kg
0.99
0.99
4.4
5.4
2.3
2.3
4.9
6.3
0.5
0.4
25
30
0.00320
0.00430
13
16
0.99
5.1
1.8
8.35
0.5
30
0.00430
16
Capasitor
Run
230 V 50 Hz
3GAE 092 201-E
3GAE 092 202-E
Speed
r/min
Current
IN
Is
Power
factor
cos
1360
1370
71.0
73.5
230 V 50 Hz
3GAE 093 202-E
850
64.5
Rating plate
The standard rating plates is in aluminum. Rating plate
is available in stainless steel, see variant code 098.
Motor sizes 56 to 71
8
Motor size 80
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
229
Variant
1)
Motor size
56-63
71-80
90-100
Balancing
052
423
424
036
NA
NA
037
NA
NA
039
040
041
NA
NA
042
NA
057
058
NA
NA
059
NA
NA
188
63-series bearings.
NA
NA
NA
178
209
425
Cooling system
068
Metal fan.
NA
075
183
NA
Dimension drawing
141
Drain holes
066
Earthing bolt
067
External earthing bolt. Earthing screw for connection of external protective earth.
Heating elements
Motor size
Element capacity
56-71
8W
80-100
25 W
450
451
1)
230
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
Code
Variant
1)
Motor size
56-63
71-80
90-100
Insulation systems
014
Mounting arrangements
008
009
047
IM 3601 ange mounted, IEC ange, from IM 3001 (B14 from B5).
048
IM 3001 ange mounted, IEC ange, from IM 3601 (B5 from B14).
078
NA
NA
080
NA
NA
200
NA
217
NA
NA
218
NA
M (only 90)
219
NA
M (only 90)
220
NA
M (only 90)
223
NA
M (only 90)
224
NA
M (only 90)
226
NA
227
NA
233
NA
234
NA
243
NA
NA
M (only 100)
244
NA
NA
M (only 100)
Painting
114
179
NA
NA
Protection
005
072
073
NA
158
211
Weather protected, IP xx W.
NA
NA
403
003
098
138
139
161
1)
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
231
Code
Variant
1)
Motor size
56-63
71-80
90-100
070
165
410
029
NA
NA
122
435
436
437
NA
Terminal box
021
136
137
180
NA
230
731
NA
Testing
146
Type test with report for motor from specic delivery batch.
147
Type test with report for motor from specic delivery batch,
customer witnessed.
149
NA
NA
221
Type test and multi-point load test with report for motor from
specic delivery batch.
148
222
760
762
1)
1)
232
S = Included as standard.
M = On modication of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
Flange-mounted motor
IM B5 (IM 3001), large ange
IM B3 (IM 1001)
Motor
size A
AA
AB
AC
AD
AE
BB
CA
CB
DA
DB
DC
EA
EG
EH
FA
56
63
71
80
90 S
90 L
100 L
90
100
112
125
140
140
160
18
26
24
28
27
27
32
108
120
136
154
170
170
197
110
120
130
150
177
177
197
110
110
125
130
140
135
155
72
72
85
97
110
110
110
71
80
90
100
100
125
140
85
96
110
125
125
150
172
36
40
45
50
56
56
63
78
71
78
80
81
81
91
7
8
10
12.5
12.5
12.5
16
9
11
14
19
24
24
28
9
11
11
14
14
14
19
M3
M4
M5
M6
M8
M8
M10
M3
M4
M4
M5
M5
M5
M6
20
23
30
40
50
50
60
20
23
23
30
30
30
40
9
10
13
16
19
19
22
9
10
10
13
12.5
12.5
19
3
4
5
6
8
8
8
3
4
4
5
5
5
6
Motor
size
56
63
71
80
90 S
90 L
100 L
G
7.2
8.5
11
15.5
20
20
24
GA
10.2
12.5
16
21.5
27
27
31
GB
7.2
8.5
8.5
11
11
11
15.5
GC
10.2
12.5
12.5
16
16
16
21.5
VA
30
36
35
37
43.5
43.5
47
VB
72
72
92
100
110
110
110
H
56
63
71
80
90
90
100
HA
8
10
9
10
10
10
12
HC
110
120
130
150
177
177
197
HD
159
171
176
190
217
217
237
IM B5 (IM 3001)
HE
71
76
63
67
82.5
82.5
92.5
K
5.8
7
7
10
10
10
12
KA
9
11
10
15
14
14
15
L
197
205
238
265
282
307
349
LC
225
237
266
300
317
342
394
UB
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
UC
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
VC
26
26
22
26
33
33
33
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
12
10
10
11
100
115
130
165
165
165
215
80
95
110
130
130
130
180
120
140
160
200
200
200
200
7
10
10
12
12
12
15
3
3
3.5
3.5
3.5
3.5
4
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
10
13
13
14
65
75
85
100
115
115
130
50
60
70
80
95
95
110
80
90
105
120
140
140
160
M5
M5
M6
M6
M8
M8
M8
2.5
2.5
2.5
3
3
3
3.5
Tolerances
A, B
ISO js 14
C
0.8
D, DA
ISO j6
VD
53
53
57
61
67
67
67
F
H
N
ISO h9
+0 0.5
ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
233
Motor
size A
AA
AB
AC
AD
AE
BB
CA
CB
DA
DB
DC
EA
EG
EH
FA
56
63
71
80
90 S
90 L
100 L
90
100
112
125
140
140
160
18
26
24
28
27
27
32
108
120
136
154
170
170
197
110
120
130
150
177
177
197
110
110
125
130
140
135
155
72
72
85
97
110
110
110
71
80
90
100
100
125
140
85
96
110
125
125
150
172
36
40
45
50
56
56
63
78
71
78
80
81
81
91
7
8
10
12.5
12.5
12.5
16
9
11
14
19
24
24
28
9
11
11
14
14
14
19
M3
M4
M5
M6
M8
M8
M10
M3
M4
M4
M5
M5
M5
M6
20
23
30
40
50
50
60
20
23
23
30
30
30
40
9
10
13
16
19
19
22
9
10
10
13
12.5
12.5
19
3
4
5
6
8
8
8
3
4
4
5
5
5
6
Motor
size
56
63
71
80
90 S
90 L
100 L
G
7.2
8.5
11
15.5
20
20
24
GA
10.2
12.5
16
21.5
27
27
31
GB
7.2
8.5
8.5
11
11
11
15.5
GC
10.2
12.5
12.5
16
16
16
21.5
VA
30
36
35
37
43.5
43.5
47
VB
72
72
92
100
110
110
110
H
56
63
71
80
90
90
100
HA
8
10
9
10
10
10
12
HC
110
120
130
150
177
177
197
HD
159
171
176
190
217
217
237
IM 2001, IM B35
HE
71
76
63
67
82.5
82.5
82.5
K
5.8
7
7
10
10
10
12
KA
9
11
10
15
14
14
15
L
197
205
238
265
282
307
349
LC
225
237
266
300
317
342
394
UB
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
UC
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
VC
26
26
22
26
33
33
33
IM 2101, IM B34
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
12
10
10
11
100
115
130
165
165
165
215
80
95
110
130
130
130
180
120
140
160
200
200
200
250
7
10
10
12
12
12
15
3
3
3.5
3.5
3.5
3.5
4
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
10
13
13
14
65
75
85
100
115
115
130
50
60
70
80
95
95
110
80
90
105
120
140
140
160
M5
M5
M6
M6
M8
M8
M8
2.5
2.5
2.5
3
3
3
3.5
Tolerances
A, B ISO js 14
C
0.8
D, DA ISO j6
234
VD
53
53
57
61
67
67
67
F
H
N
ISO h9
+0 0.5
ISO j6
Bearings
Axially locked
bearings
Bearing seals
56
71
Material
Surface treatment
D-end
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6304-2Z/C3
6205-2Z/C3
6306-2Z/C3
N-end
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
1)
1)
1)
1)
D-end
D-end
1)
D-end
V ring.
N-end
Labyrinth seal.
Permanently lubricated bearings. Grease temperature (-30+150C).
Surface treatment
Similar to stator.
Srews
Connection openings
4 x M16
Terminal box
Fan
Material
Fan hood
Material
Metal.
Stator winding
Material
Copper.
Impregnation
Insulation class
Insulation class F.
Material
Die-cast aluminum.
Balancing method
Key ways
Heating elements
100
Rotor winding
90
Surface treatment
Material
Connections
80
Lubrication
Terminal box
63
Material
On request
4 x M20
8W
Drain holes
Standard.
Enclosure
IP 55.
Cooling method
IC 411.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
2 x (M25 + M20)
25 W
235
236
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase GB 12-2004
Integral Motors
Totally enclosed squirrel cage three
phase low voltage motors,
Sizes 71 - 100, 0.37 to 2.2 kW
www.abb.com/motor&drives
> Motors
> Low voltage motors
> General purpose motors
Features.................................................238
Connections ..........................................239
Ordering information ............................240
Technical data .......................................241
Technical specication for
frequency converter .............................245
Variant codes ........................................247
Derating information ............................249
Dimensions ...........................................250
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
237
Features
Integral Motor - the choice for a demanding
environment
Demanding environments place a requirement for high
protection class motors with good vibration endurance.
This is why the integral motor is IP 55 protected. In addition to the wide selection of digital and analogue user
interfaces, the integral motor offers higher integration
into the modern control system with its eldbuses, to
meet the demands for distributed control.
Products according to your needs
Integral motor models are available as 2, 4 or 6 pole
versions. The integral motor is delivered as an integrated, ready-to-use unit equipped with a brake, separate
ventilation, or any other selected variants. The pre-set
parameters offer conguration required by most of the
simple applications and make commissioning and use
as easy as possible. For more demanding applications,
an optional control panel or PC software tool can be
used to select from a range of more advanced application macros.
Full EMC limits at every level
Electro Magnetic Compatibility is an important issue in
AC automation. The integral motor complies with European distribution limits with the help of built-in EMC
lters, so that no external ltering is needed. Standard
models of the integral motor full EMC requirements in
industrial environments and models with RFI lter in the
domestic environments.
Excellent features for OEM's
The integral motor provides a low cost way to enhance
an application's performance: it is not limited to "soft
starting" applications in which integrated
motor-drive combinations have traditionally been used.
Features include up to 180 % overload capacity during start-up, PTC interface, built-in mechanical brake
control and electrical braking produce an unbeatable
combination for material handling applications. The robust design withstands supply voltage uctuations and
the wide selection of eldbus options makes integration
into automation systems easy.
One of the most interesting features is the Positioning
Macro, which together with an optional encoder makes
it possible to eliminate expensive PLCs in simple positioning applications. This feature is useful for example in
controlling conveyor lines or opening doors.
Intelligent control for pumps and fans
The built-in PID controller's two parameter sets make
the integral motor ideally suited for pump and fan applications. The integral motor can be congured to indicate
directly parameters such as the ow rate of a pumped
uid, for instance. With the integral motor it is possible
to make a connection to building automation via a LonWorks eldbus adapter.
Typically no overload capacity is needed in pump or fan
applications. This allows the integral motor to be optimised for squared torque use.
The integral motor offers
- Mounting to demanding environment
- Ready-to-use conguration with pre-set parameters
- Full congurable functionality when using an IP65
control panel
- Easy adaptation to automation systems with wide
range of eldbuses
- Built-in EMC lter and brake chopper
- Simple positioning tasks with Positioning application
macro
- Optimised selection integral motor
models and integrated variants
238
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
Connections
To achieve maximum compatibility the integral motor
provides all necessary connections and options. Options are IP 65 protected which means that they can
withstand extremely hostile environments like places
with high moisture. Options are placed straight on the
side of the drive and no extra installing space is required.
The various options are shown below. After the integral
motor has been specied, it will be delivered as a ready
assembled and parametrized unit.
I/O terminal
X1
0-10 V
SCR
0(4)-20 mA
AI1
AGND
1-10 k
ON ON
ON
ON
Analog
inputs
0-10 V
0-10 V
I/O terminal
X1
AI1
+10V
AGND
+10V
AI2
AI2
AGND
AGND
AO1
0...20 mA
Ground the cable screen
on the sourcing end.
AGND
+24V
DCOM
DI1
start/
stop
fwd/
rev
AO1
AGND
+24V
const.
speed 1
ramp
pair sel.
DCOM
DI1
DI2
DI2
DI3
DI3
DI4
DI4
RO1A
Running
closed
RO2A
RO1B
RO2B
start/
stop
ramp
pair sel.
fwd/
const.
rev
speed 1
+ 24 V
0V
DI5
DI5
Fault
open
1-10 k
SCR
Fault
open
RO1A
Running
closed
RO2A
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
RO1B
RO2B
239
Ordering information
1. Standard design
When ordering an integral motor, please state the
following minimum data in the order, as in the example.
2. Special designs
In addition to the minimum data all special features
desired shall be stated expressly in the text of the order.
3. Note
- If the order is based on a quotation please state the
number
- If the same motors were supplied before (replacement
motors) please state their serial number (see motor
rating plate).
M3VK 80C
D E F
5-6 7
8-10 11 12 13 14
240
Position 11
- (Dash)
Motor type
Pole number
Mounting arrangement (IM-code)
Rated output
Product code
Variant codes if needed
Type of drive
M3VK 80C
4
IM B3 (IM 1001)
0.75 kW
3GVK082662-ASC
Standard drive
A
B
C
Motor type
Motor size
Product code
D Mounting arrangement code
E Voltage and frequency code
F Generation code
G Variant codes
Position 12
Mounting arrangement
A = Foot-mounted motor.
B = Flange-mounted motor. Large ange with clearance
holes.
C = Foot-mounted motor. Small ange with tapped holes.
F = Foot- and ange-mounted motor. Special ange.
H = Foot- and ange-mounted motor. Large ange with
clearence holes.
J = Foot- and ange-mounted motor. Small ange with
tapped holes.
V = Flange-mounted motor. Special ange.
Position 13
Voltage and frequency code
Single-speed
D = 380-420 VD 50 Hz
440-480 VD 60 Hz
S = 220-240 VD 50 Hz
380-420 VY 50 Hz
440-480 VY 60 Hz
X = Other voltage/frequency
Position 14
Generation code = A, B, C...
The product code must be, if needed, followed by variant
codes.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
Output Type
kW
designation
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
71A
71B
80A
80B
80C
90S
90L
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
71B
80A
80B
80C
90S
90L
100LA
M3VK
M3VK
M3VK
M3VK
M3VK
71A
80B
90S
90L
100L
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
71A
71B
80A
80B
80C
90S
90L
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
71A
80A
80B
80C
90S
90L
100LA
M3VK
M3VK
M3VK
M3VK
M3VK
71A
80B
90S
90L
100L
Input
current
I1N
Product
code
Cont.
output
current
I2N1),2)
A
Max.
curent
150 %
Imax3)
A
1.8
1.8
2.4
3.4
4.1
4.1
5.4
2.7
2.7
3.6
5.1
6.2
6.2
8.1
1.8
1.8
2.4
3.4
3.4
4.1
5.4
2.7
2.7
3.6
5.1
5.1
6.2
8.1
1.8
1.8
2.4
3.4
4.1
2.7
2.7
3.6
5.1
6.2
1.8
1.8
2.4
3.4
4.1
4.1
5.4
2.7
2.7
3.6
5.1
6.2
6.2
8.1
380-480 V 50 Hz
3GVK 071 661-C
3GVK 071 662-C
3GVK 081 661-C
3GVK 081 662-C
3GVK 081 663-C
3GVK 091 661-E
3GVK 091 662-E
1.6
1.6
2.2
3.2
4.1
4.1
6.0
1.6
1.6
2.2
3.2
3.2
4.1
6.0
1.6
1.6
2.2
3.2
4.1
1.6
1.6
2.2
3.2
4.1
4.1
6.0
1.6
1.6
2.2
3.2
3.2
4.1
6.0
1.6
1.6
2.2
3.2
4.1
kg
3.2
3.2
4.3
6.1
7.4
7.4
9.7
7.1
7.1
9.5
13
16
16
21
4
4
4
6
10
10
10
17
17
23
33
45
45
66
16
16
17
18
19
19
20
10
11
14
16
16
18
21
3.2
3.2
4.3
6.1
6.1
7.4
9.7
7.1
7.1
9.5
13
13
16
21
4
4
4
6
6
10
10
17
17
23
33
33
45
66
16
16
17
18
18
19
20
11
14
15
16
18
21
26
3.2
3.2
4.3
6.1
7.4
7.1
7.1
9.5
13
16
4
4
4
6
10
17
17
23
33
45
16
16
17
18
19
14
15
18
21
28
3.2
3.2
4.3
6.1
7.4
7.4
9.7
4
4
4
6
10
10
10
17
17
23
33
45
45
66
18
18
19
20
21
21
22
12
13
15
17
18
19
23
4
4
4
6
6
10
10
17
17
23
33
33
45
66
18
18
19
20
20
21
22
13
15
16
17
19
22
28
4
4
4
6
10
17
17
23
33
45
18
18
19
20
21
15
16
19
22
29
7.1
7.1
9.5
13
16
16
21
380-480 V 50 Hz
3GVK 083 761-C
3GVK 083 762-C
3GVK 093 761-E
3GVK 093 762-E
3GVK 103 761-E
380-480 V 50 Hz
3GVK 072 762-C
3GVK 082 761-C
3GVK 082 762-C
3GVK 082 763-C
3GVK 092 761-E
3GVK 092 762-E
3GVK 102 761-E
Total
weight
Standard Drive
380-480 V 50 Hz
3GVK 071 761-C
3GVK 071 762-C
3GVK 081 761-C
3GVK 081 762-C
3GVK 081 763-C
3GVK 091 761-E
3GVK 091 762-E
Power losses
Power Control
circuit circuit
Standard Drive
380-480 V 50 Hz
3GVK 083 661-C
3GVK 083 662-C
3GVK 093 661-E
3GVK 093 662-E
3GVK 103 661-E
Line
fuse5)
Standard Drive
380-480 V 50 Hz
3GVK 072 662-C
3GVK 082 661-C
3GVK 082 662-C
3GVK 082 663-C
3GVK 092 661-E
3GVK 092 662-E
3GVK 102 661-E
Max.starting Over
current
current
180 %4)
limit
(peak)
A
A
2.7
2.7
3.6
5.1
5.1
6.2
8.1
3.2
3.2
4.3
6.1
6.1
7.4
9.7
7.1
7.1
9.5
13
13
16
21
2.7
2.7
3.6
5.1
6.2
3.2
3.2
4.3
6.1
7.4
7.1
7.1
9.5
13
16
The two bullets in the product code indicate choice of mounting arrangement, voltage and nominal frequecy.
1 ) Power stages are designed for the continuous I2N current.
These values apply at altitudes less than 1000 m ASL.
2 ) With 8 kHz switching frequency derate I2N to 70% in -10C...40C
or to 60% in 40C...50C.
3 ) 150 % of nominal current I2N allowed for one minute every 10 minutes.
4 ) 180 % of nominal current I2N allowed for two seconds.
5 ) Fuse type: UL class CC or T. For non-UL installations IEC269gG.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
241
Output Type
kW
designation
M3VK 80C
M3VK 90L
M3VK 90LB
M3VK 90L
M3VK 100LA
M3VK 100LC
M3VK 80C
M3VK 90L
M3VK 90LB
M3VK 90L
M3VK 100LA
M3VK 100LC
Input
current
I1N
Product
code
Cont.
output
current
I2N1)
A
380-480 V 50 Hz
3GVK 081 673-C
3GVK 091 672-E
3GVK 091 673-E
3.2
4.1
6.0
3.4
4.1
5.4
3.2
4.1
6.0
3.4
4.1
5.4
3.2
4.1
6.0
3.2
4.1
6.0
Power losses
Power Control
circuit circuit
Total
weight
kg
5.1
6.2
8.1
6.1
7.4
9.7
13
16
21
6
10
10
33
45
66
18
19
20
16
21
23
5.1
6.2
8.1
6.1
7.4
9.7
13
16
21
6
10
10
33
45
66
18
19
20
21
26
30
6
10
10
33
45
66
20
21
22
17
22
25
6
10
10
33
45
66
20
21
22
22
27
32
5.1
6.2
8.1
3.4
4.1
5.4
5.1
6.2
8.1
380-480 V 50 Hz
3GVK 092 772-E
3GVK 102 771-E
3GVK 102 773-E
Line
fuse4)
Standard Drive
380-480 V 50 Hz
3GVK 081 773-C
3GVK 091 772-E
3GVK 091 773-E
Max.starting Over
current
current
180 %3)
limit
(peak)
A
A
Standard Drive
380-480 V 50 Hz
3GVK 092 672-E
3GVK 102 671-E
3GVK 102 673-E
Max.
curent
150 %
Imax2)
A
6.1
7.4
9.7
13
16
21
13
16
21
The two bullets in the product code indicate choice of mounting arrangement, voltage and nominal frequecy.
1 ) Power stages are designed for the continuous I2N current.
These values apply at altitudes less than 1000 m ASL.
2 ) With 8 kHz switching frequency derate I2N to 70% in -10C...40C
or to 60% in 40C...50C.
3 ) 150 % of nominal current I2N allowed for one minute every 10 minutes.
4 ) 180 % of nominal current I2N allowed for two seconds.
5 ) Fuse type: UL class CC or T. For non-UL installations IEC269gG.
242
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
Output
kW
Type
designation
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
80A
80B
80C
90S
90L
100L
M3VK
M3VK
M3VK
M3VK
M3VK
80B
90S
90L
100LA
100LB
M3VK
M3VK
M3VK
M3VK
M3VK
M3VK
80A
80B
80C
90S
90L
100L
M3VK
M3VK
M3VK
M3VK
M3VK
80B
90S
90L
100LA
100LB
Input
current
I1N
Product
code
380-480 V 50 Hz
3GVK 081 861-C
3GVK 081 862-C
3GVK 081 863-C
3GVK 091 861-E
3GVK 091 862-E
3GVK 101 861-E
1.6
2.2
3.2
3.2
4.1
6.0
1.6
2.2
3.2
4.1
6.0
Power losses
Power Control
circuit
circuit
Total
weight
kg
2.2
2.8
3.8
3.8
5.0
6.6
7.1
9.5
13
13
16
21
4
4
6
6
10
10
17
23
33
33
45
66
16
17
18
18
19
20
14
16
16
18
21
27
2.2
2.8
3.8
5.0
6.6
7.1
9.5
13
16
21
4
4
6
10
10
17
23
33
45
66
16
17
18
19
20
15
18
21
26
30
17
23
33
33
45
66
18
19
20
20
21
22
15
17
18
19
22
28
17
23
33
45
66
18
19
20
21
22
16
19
22
27
31
2.2
2.8
3.8
3.8
5.0
6.6
1.6
2.2
3.2
4.1
6.0
2.2
2.8
3.8
5.0
6.6
380-480 V 50 Hz
3GVK 082 962-C
3GVK 092 961-E
3GVK 092 962-E
3GVK 102 961-E
3GVK 102 962-E
Line
fuse4)
Standard Drive
380-480 V 50 Hz
3GVK 081 961-C
3GVK 081 962-C
3GVK 081 963-C
3GVK 091 961-E
3GVK 091 962-E
3GVK 102 961-E
Over
current
limit
(peak)
A
Standard Drive
380-480 V 50 Hz
3GVK 082 862-C
3GVK 092 861-E
3GVK 092 862-E
3GVK 102 861-E
3GVK 102 862-E
Cont.
output
current
I2NSQ1),2),3)
A
7.1
9.5
13
13
16
21
4
4
6
6
10
10
4
4
6
10
10
The two bullets in the product code indicate choice of mounting arrangement, voltage and nominal frequecy.
1 ) Power stages are designed for the continuous I2NSQ current.
These values apply at altitudes less than 1000 m ASL.
2 ) With 8 kHz switching frequency derate I2NSQ to 70% in -10C...40C
or to 60% in 40C...50C.
3 ) No overloadability
4 ) Fuse type: UL class CC or T. For non-UL installations IEC269gG.
For 6 poles integral motors in Pump&Fan application select a product from General purpose codes.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
243
Output
kW
Type
designation
Product
code
M3VK
M3VK
M3VK
M3VK
80C
90L
90LB
100LB
M3VK 90L
M3VK 100LA
M3VK 100LC
M3VK
M3VK
M3VK
M3VK
80C
90L
90LB
100LB
M3VK 90L
M3VK 100LA
M3VK 100LC
081 873-C
091 872-E
091 873-E
101 873-E
2.2
3.2
4.1
6.0
2.8
3.8
5.0
6.6
2.2
3.2
4.1
2.8
3.8
5.0
081 973-C
091 972-E
091 973-E
101 973-E
2.2
3.2
4.1
6.0
2.8
3.8
5.0
6.6
2.2
3.2
4.1
2.8
3.8
5.0
Power losses
Power Control
circuit
circuit
Total
weight
kg
9.5
13
16
21
4
6
10
10
23
33
45
66
17
18
19
20
16
21
23
31
9.5
13
16
4
6
10
23
33
45
17
18
19
21
26
30
23
33
45
66
19
20
21
22
17
22
24
31
23
33
45
19
20
21
22
27
31
380-480 V 50 Hz
3GVK 092 972-E
3GVK 102 971-E
3GVK 102 973-E
Line
fuse4)
Standard Drive
380-480 V 50 Hz
3GVK
3GVK
3GVK
3GVK
Over
current
limit
(peak)
A
Standard Drive
380-480 V 50 Hz
3GVK 092 872-E
3GVK 102 871-E
3GVK 102 873-E
Cont.
output
current
I2NSQ1),2),3)
A
380-480 V 50 Hz
3GVK
3GVK
3GVK
3GVK
Input
current
I1N
9.5
13
16
21
4
6
10
10
4
6
10
The two bullets in the product code indicate choice of mounting arrangement, voltage and nominal frequecy.
1 ) Power stages are designed for the continuous I2NSQ current.
These values apply at altitudes less than 1000 m ASL.
2 ) With 8 kHz switching frequency derate I2NSQ to 70% in -10C...40C
or to 60% in 40C...50C.
3 ) No overloadability
4 ) Fuse type: UL class CC or T. For non-UL installations IEC269gG.
For 6 poles integral motors in Pump&Fan application select a product from General purpose codes.
244
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
Motor connection
Programmable features *)
Protection
Limits
- Over current trip limit: 3.5 I2
- DC current regulation limit: 0.5...1.5 I2
- DC over voltage trip limit: 875 V
- DC under voltage trip limit: 333 V
- Power-loss ride-through: 500 ms
- Over temperature limit: 105C inside power module
Inverter protection:
- Output short circuit, Input phase loss, Inverter overload,
Output earth-fault, Serial communication error, Loss of AI
signal, I/O terminal short circuit, Auxiliary voltage short
circuit, Brake resistor overload
Motor protection:
- Stall protection, Over temperature protection by I2t
estimation or PTC thermistors.
Environmental limits
Product compliance
- Low Voltage Directive 73/23/EEC with amendments
- EMC Directive 89/336/EEC with amendments
- Quality Assurance systems ISO 9001 and ISO 14001
- CE, UL, cUL and C-Tick approvals
*) Adjustable only with control panel.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
245
Type code
PROFIBUS
InterBus-S
DeviceNet
CANOpen
CFB-PDP
CFB-IBS
CFB-DEV
CFB-CAN
LONWORKS
Modbus
Variant code
Protocol mode
Device prole
Baudrate (min.-max.)
612
613
616
614
DP
PCP
N.A.
N.A.
CFB-LON
615
LONTALK
CFB-RS
617
RTU
Prodrive V.2
Drivecom (Prole 21)
AC Drive
Drives and Motion control
(DS402 V.1.1)
Variable Speed
Motor Drive 6010
Vendor Specic
78 kbits
300 - 19200 bit/s
Brake resistor
Type code
CA-BRK-R1-1
CA-BRK-R1-1
CA-BRK-R1-2
CA-BRK-R1-2
CA-BRK-R2
Variant code
618
618
619
619
620
Resistance
Ohm
W
390
390
125
125
125
Max. average
resistor power
W
39
39
39
39
45
Max. instantaneous
resistor power
700
950
1500
2100
3080
246
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
Variant
S = Included as standard.
NA = Not applicable.
R = On request.
P = New manufacture only.
Frame size
71
80
90
100
Balancing
052
423
424
042
Locked drive-end.
057
425
Cooling system
068
Metal fan.
183
Drain holes
065
NA
NA
066
076
Earthing bolt
067
Heating elements
450
451
Mounting arrangements
007
IM 3001 ange mounted, IEC ange, from IM 1001 (B5 from B3).
008
009
047
IM 3601 ange mounted, IEC ange, from IM 3001 (B14 from B5).
048
IM 3001 ange mounted, IEC ange, from IM 3601 (B14 from B5).
Painting
114
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
247
Variant
S = Included as standard.
NA = Not applicable.
R = On request.
P = New manufacture only.
Frame size
71
80
90
100
Protection
005
073
158
013
098
138
069
165
410
Testing
140
Test conrmation
473
477
248
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
Variant
S = Included as standard.
NA = Not applicable.
R = On request.
P = New manufacture only.
Frame size
71
80
90
100
Unit body
230
Brake resistor
618
Inverter brake resistor for 0.37 kW, 0.55 kW & 0.75 kW unit (general purpose ratings)
NA
619
Inverter brake resistor for 1.1 kW & 1.5 kW unit (general purpose ratings)
NA
620
NA
NA
Panel kit
611
Fieldbus type
612
CFB-PDP
613
CFB-IBS
614
CFB-CAN
615
CFB-LON
616
CFB-DEV
617
CFB-RS
Derating Information
M3VK
M3VK
with separate
cooling unit
Cooling
unit
249
Integral Motor
Standard Drive
Product Code
Drive with RFI lter
Dimensions
A
B
C
HC
D
std*
D
HD
w RFI* std*
HD
w RFI*
112
112
125
125
125
140
140
90
90
100
100
100
100
125
45
45
50
50
50
56
56
30
30
40
40
40
50
50
71
71
80
80
80
90
90
130
130
150
150
150
170
170
7
7
10
10
10
10
10
283
283
275
275
275
282
307
110
110
110
110
110
110
110
146
146
146
146
146
146
146
261
261
280
280
280
300
300
297
297
316
316
316
336
336
221
221
221
221
221
221
261
171
171
171
171
171
171
171
112
125
125
125
140
140
160
90
100
100
100
100
125
140
45
50
50
50
56
56
63
30
40
40
40
50
50
60
71
80
80
80
90
90
100
130
150
150
150
170
170
190
7
10
10
10
10
10
12
283
275
275
275
282
307
349
110
110
110
110
110
110
110
146
146
146
146
146
146
146
261
280
280
280
300
300
310
297
316
316
316
336
336
346
221
221
221
221
221
221
261
171
171
171
171
171
171
171
125
125
140
140
160
100
100
100
125
140
50
50
56
56
63
40
40
50
50
60
80
80
90
90
100
150
150
170
170
190
10
10
10
10
12
275
275
282
307
349
110
110
110
110
110
146
146
146
146
146
280
280
300
300
310
316
316
336
336
346
221
221
221
221
221
171
171
171
171
171
Integral Motor
Standard Drive
Product Code
Drive with RFI lter
Dimensions
A
B
C
HC
L
std*
D
D
w RFI* std
HD
HD
w RFI*
125
140
140
140
160
160
40
50
50
50
60
60
80
90
90
90
100
100
150
170
170
170
190
190
10
10
10
10
12
12
275
307
307
307
349
349
110
110
110
110
110
110
280
300
300
300
310
310
221
221
261
221
221
261
171
171
171
171
171
171
100
125
125
125
140
140
50
56
56
56
63
63
146
146
146
146
146
146
316
336
336
336
346
346
250
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
Integral Motor
Standard Drive
Product Code
Drive with RFI lter
Dimensions
A
B
C
HC
D
std*
D
w RFI*
HD
std*
HD
w RFI*
125
125
125
140
140
160
100
100
100
100
125
140
50
50
50
56
56
63
40
40
40
50
50
60
80
80
80
90
90
100
150
150
150
170
170
190
10
10
10
10
10
12
275
275
275
282
307
349
110
110
110
110
110
110
146
146
146
146
146
146
280
280
280
300
300
310
316
316
316
336
336
346
221
221
221
221
221
261
171
171
171
171
171
171
125
140
140
160
160
100
100
125
140
140
50
56
56
63
63
40
50
50
60
60
80
90
90
100
100
150
170
170
190
190
10
10
10
12
12
275
282
307
349
349
110
110
110
110
110
146
146
146
146
146
280
300
300
310
310
316
336
336
346
346
221
221
221
221
261
171
171
171
171
171
Integral Motor
Standard Drive
Product Code
Drive with RFI lter
Dimensions
A
B
C
HC
L
std*
D
D
w RFI*
HD
std
HD
w RFI*
125
140
140
160
140
160
160
40
50
50
60
50
60
60
80
90
90
100
90
100
100
150
170
170
190
170
190
190
10
10
10
12
10
12
12
275
307
307
349
307
349
349
110
110
110
110
110
110
110
280
300
300
310
300
310
310
316
336
336
346
336
346
346
221
221
221
261
221
221
221
171
171
171
171
171
171
171
100
125
125
140
125
140
140
50
56
56
63
56
63
63
146
146
146
146
146
146
146
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Integral GB 12-2004
251
Notes:
252
Notes:
253
Other applications
Permanent magnet motors
High speed motors
Wind turbine generators
Smoke venting motors
Water cooled motors
Motors for roller table drives
NEMA motors
www.abb.com/motors&drives
255
France
ABB Automation
Rue du Gnral de Gaulle
Champagne-sur-Seine
FR-77811 Moret-sur-Loing Cedex
Tel: +33 (0) 1 60 746 500
Fax: +33 (0) 1 60 746 565
Korea
ABB Korea Ltd.
7-9, Oksan Bldg., 157-33
Sungsung-dong, Kangnam-ku
Seoul
Tel: +82 2 528 2329
Fax: +82 2 528 2338
Austria
ABB AG
Clemens Holgmeisterstrasse 11 B
AT-1810 Wien
Tel: +43 (0) 1 601 090
Fax: +43 (0) 1 601 09 8305
Germany
ABB Automation Products GmbH
Edisonstrasse 15
DE-68623 Lampertheim
Tel: +49 (0) 6206 503 503
Fax: +49 (0) 6206 503 600
Malaysia
ABB Malaysia Sdn. Bhd.
Lot 608, Jalan SS 13/1K
47500 Subang Jaya, Selangor
Tel: +60 3 5628 4888
Fax: +60 3 5631 2926
Belgium
Asea Brown Boveri S.A.-N.V.
Hoge Wei 27
BE -1930 Zaventem
Tel: +32 (0) 2 718 6311
Fax: +32 (0) 2 718 6657
Hong Kong
ABB (Hong Kong) Ltd.
Tai Po Industrial Estate,
3 Dai Hei Street,
Tai Po, New Territories,
Hong Kong
Tel: +852 2929 3838
Fax: +852 2929 3505
Mexico
ABB Mxico, S.A. de C.V.
Apartado Postal 111
CP 54000 Tlalnepantla
Edo. de Mxico, Mxico
Tel: +52 5 328 1400
Fax: +52 5 390 3720
Canada
ABB Inc., BA Electrical Machines
10300 Henri-Bourassa Blvd, West,
Saint-Laurent, Quebec
Canada H4S 1N6
Tel: +1 514 832-6583
Fax: +1 514 332-0609
China*
ABB Shanghai Motors
Company Limited
8 Guang Xing Rd.,Rong Bei
Town, Songjiang County,
Shanghai 201613
Tel: +86 21 5778 0988
Fax: +86 21 5778 1364
India*
ABB Ltd.
32, Industrial Area, N.I.T
Faridabad 121 001
Tel: +91 (0) 129 502 3001
Fax: +91 (0) 129 502 3006
The Netherlands
ABB B.V.
Dept. LV motors (APP2R)
P.O.Box 301
NL-3000 AH Rotterdam
Tel: +31 (0) 10 4078 879
Fax: +31 (0) 10 4078 345
Indonesia
PT. ABB Sakti Industri
JL. Gajah Tunggal Km.1
Jatiuwung, Tangerang 15136
Banten, Indonesia
Tel: + 62 21 590 9955
Fax: + 62 21 590 0115 - 6
Norway
ABB AS
P.O.Box 154 Vollebekk
NO-0520 Oslo
Tel: +47 22 872 000
Fax: +47 22 872 541
Chile
Asea Brown Boveri S.A.
P.O.Box 581-3
Santiago
Tel: +56 (0) 2 5447 100
Fax: +56 (0) 2 5447 405
Ireland
Asea Brown Boveri Ltd
Components Division
Belgard Road
Tallaght, Dublin 24
Tel: +353 (0) 1 405 7300
Fax: +353 (0) 1 405 7327
Denmark
ABB A/S
Automation Technology Electrical
Machines
Petersmindevej 1
DK-5000 Odense C
Tel: +45 65 477 070
Fax: +45 65 477 713
Italy*
ABB SACE SpA
LV Motors
Via Della Meccanica, 22
IT-20040 Caponago - MI
Tel: +39 02 959 6671
Fax: +39 02 959 667216
Finland*
ABB Oy
LV Motors
P.O.Box 633
FI-65101 Vaasa
Tel: +358 (0) 10 22 11
Fax: +358 (0) 10 22 47372
Japan
ABB K.K.
26-1 Cerulean Tower
Sakuragaoka-cho, Shibuya-ku
Tokyo 150-8512
Tel: +81 (0) 3 578 46251
Fax: +81 (0) 3 578 46260
http://www.abb.com/motors&drives
http://online.abb.com/motors&drives
Singapore
ABB Industry Pte Ltd
2 Ayer Rajah Crescent
Singapore 139935
Tel: +65 6776 5711
Fax: +65 6778 0222
Spain*
ABB Automation Products S.A.
Division Motores
P.O.Box 81
ES-08200 Sabadell
Tel: +34 93 728 8500
Fax: +34 93 728 8741
Sweden*
ABB Automation Technologies AB
LV Motors
SE-721 70 Vsters
Tel: +46 (0) 21 329 000
Fax: +46 (0) 21 329 140
Switzerland
ABB Schweiz AG
Normelec
Badenerstrasse 790
Postfach
CH-8048 Zrich
Tel: +41 (0) 58 586 0000
Fax: +41 (0) 58 586 0603
Taiwan
ABB Ltd.
6F, No. 126, Nanking East Road,
Section 4i
Taipei, 105 Taiwan, R.O.C.
Tel: +886 (0) 2 2577 6090
Fax: +886 (0) 2 2577 9467
Thailand
ABB Limited (Thailand)
161/1 SG Tower,
Soi Mahadlekluang 3,
Rajdamri, Bangkok 10330
Tel: +66 2 665 1000
Fax: +66 2 665 1042
The United Kingdom
ABB Automation Ltd
9 The Towers, Wilmslow Road
Didsbury
Manchester, M20 2AB
Tel: +44 (0) 161 445 5555
Fax: +44 (0) 161 448 1016
USA
ABB Inc.
Low Voltage Motors
16250 W. Glendale Drive
New Berlin, WI 53151
Tel: +1 262 785 3200
Fax: +1 262 785 8628
Venezuela
Asea Brown Boveri S.A.
P.O.Box 6649
Carmelitas,
Caracas 1010A
Tel: +58 (0) 2 238 2422
Fax: +58 (0) 2 239 6383
Australia
ABB Industry Pty Ltd
2 Douglas Street
Port Melbourne,
Victoria, 3207
Tel: +61 (0) 3 9644 4100
Fax: +61 (0) 3 9646 9362