You are on page 1of 2

show run

Building configuration...
Current configuration : 1085 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!card type command needed for slot 1
enable secret 5 $1$unFL$BMDkR.zDlXtlbSmMUQR4q/
!
no aaa new-model
memory-size iomem 15
!
!
ip cef
!
!
no--More-ip domain lookup
!--More-!--More-!--More-!--More-!--More-!--More-!--More-interface
--More-- FastEthernet0/0
ip address 172.16.3.1 255.255.255.0
--More-duplex auto
--More-speed auto
--More-!--More-interface
--More-- FastEthernet0/1
no ip address
--More-shutdown
--More-duplex auto
--More-speed auto
--More-!--More-interface
--More-- Serial0/1/0
ip address 172.16.2.1 255.255.255.0
--More-clock rate 64000
--More-!--More-interface
--More-- Serial0/1/1
no ip address
--More-shutdown
--More-clock rate 2000000
--More-!--More-ip--More-forward-protocol nd
ip--More-route 0.0.0.0 0.0.0.0 172.16.2.2
ip--More-route 172.16.1.0 255.255.255.0 172.16.2.2
!--More-ip--More-http server
no--More-ip http secure-server
!--More--

!--More-control-plane
--More-!--More-banner
--More-motd ^C
********************************
--More---More-!!!AUTHORIZED ACCESS ONLY!!!
********************************
--More-^C--More-!--More-line
--More-con 0
password cisco
--More-login
--More-line
--More-aux 0
line
--More-vty 0 4
password cisco
--More-logging synchronous
--More-login
--More-!--More-scheduler
--More-- allocate 20000 1000
!--More-end
--More---More-R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#

You might also like