Professional Documents
Culture Documents
Training Course
Version 1.1
Comment [sf1]: If you can see this, Instructor Guide comments are visible throughout the document! To hide, from the Reviewing toolbar, select Final instead of Final Showing Markup
Actix Spotlight UMTS and GSM Training Course for Version 1.1
The content of this manual is provided for information only, is subject to change without notice, and should not be construed as a commitment by Actix. Actix assumes no responsibility or liability for any errors or inaccuracies that appear in this documentation. Copyright Actix 2007. All rights reserved. All trademarks are hereby acknowledged.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
Contents
INTRODUCTION ........................................................................................... 6
SCOPE OF THE COURSE .......................................................................................... 6 WHO SHOULD ATTEND THIS TRAINING COURSE?.............................................................. 7 PREREQUISITES ................................................................................................... 7 AIMS OF THE COURSE ............................................................................................ 8
UMTS SECTION ........................................................................................ 24 SUMMARY DASHBOARD ................................................................................ 25 UMTS SPOTLIGHT REPORTS ......................................................................... 27 EVENT EXPLORER ...................................................................................... 32
ADDITIONAL FEATURES .........................................................................................35 DETAILED EVENT DIAGNOSTICS ...............................................................................37 EXERCISE: DROP CALL ANALYSIS .............................................................................39
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
INTERLUDE: USING CELLREFS ........................................................................ 72 WORKSHOP: EXAMINING YOUR OWN DATA (OPTIONAL)......................................... 73 GSM SECTION ......................................................................................... 74 GSM SUMMARY DASHBOARD......................................................................... 75 GSM SPOTLIGHT REPORTS ........................................................................... 77 EVENT EXPLORER ...................................................................................... 82
ADDITIONAL FEATURES .........................................................................................85 DETAILED EVENT DIAGNOSTICS ...............................................................................87 EXERCISE: DROP CALL ANALYSIS .............................................................................89
INTERLUDE: USING CELLREFS .......................................................................106 WORKSHOP: EXAMINING YOUR OWN DATA (OPTIONAL)........................................107 APPENDIX A: UMTS THRESHOLDS .................................................................108
SPOTLIGHT ..................................................................................................... 108 UMTS / SCAN_COVERAGE ................................................................................... 108 UMTS / SPOTLIGHT .......................................................................................... 109 UMTS / UE_COVERAGE ..................................................................................... 111
APPENDIX B: DATA SETTINGS FOR UMTS NEIGHBOR ANALYSES ..............................114 APPENDIX C: UMTS EVENT DIAGNOSES ..........................................................118 APPENDIX D: GSM THRESHOLDS ..................................................................129
SPOTLIGHT ..................................................................................................... 129 GSM / ADVANCED_HANDOVER_ANALYSIS ................................................................ 129 GSM / ANALYSIS .............................................................................................. 130 GSM / CELL_PLAN_VIEWER ................................................................................. 131 GSM / EVENTS ................................................................................................ 131 GSM / SPOTLIGHT ............................................................................................ 132 GSM / TROUBLESHOOTER .................................................................................... 133
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
APPENDIX E: DATA SETTINGS FOR GSM 2G NEIGHBOR ANALYSIS ............................136 APPENDIX F: GSM DIAGNOSIS .....................................................................139 APPENDIX G: GSM VISUALIZATION ................................................................147 MYACTIX AND SUPPORT ..............................................................................152
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
Introduction
Scope of the course
The UMTS and GSM Spotlight Training Course provides a comprehensive overview of Spotlight for the UMTS and GSM technologies. The goal of the course is to give an understanding of the capabilities of the system and how it can help users to improve quality of service for their network subscribers. Advanced users will be introduced to new network applications. The instructors for this course are experts in using Actix solutions to increase productivity, and are familiar with the challenges faced by engineers working in cellular/PCS environments. Class size is limited to ensure that everyone receives extensive one on one instruction. Participants have many opportunities to ask questions relevant to their particular optimization needs. Upon completing the course, participants will be able to use what they learned in class to identify and solve real network problems. The UMTS and GSM Spotlight Training Course begins with a high-level presentation of the Actix platform interface and its capabilities. We will then cover how existing optimization processes can be tailored to the specific needs of the participants.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
Prerequisites
Familiarity with network infrastructure and operation of the air interface. A general understanding of drive test and call trace collection and post-processing methodology and advantages/limitations with each dataset. Access to Actix software and a familiarity with the Actix software platform. Basic computer literacy, including familiarity with Windows and MS Office applications.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
10
Cell coverage, interference problems and UMTS/GSM visualization can be investigated from the Radio Network Explorer analyses (links to these are shown as Important Issues in the Issues panel of the Summary Dashboard). These then point you at specific problem events which you can examine and diagnose using the Event Explorer (links to these are shown as Critical Issues in the Issues panel).
Event-based troubleshooting
Automated root-cause diagnostics for the most common subscriber problems such as dropped calls and call setup failure.
Reporting
Integrated, professional-quality reports including embedded maps.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
11
Whats in Spotlight?
New Project and Template Creation Provides a link to the new template configuration wizard or allows a user to create a new project using an existing template. New Template Configuration Wizard Step by step wizard that guides the user to configure a new template with required devices, KPIs, reports, queries and so on. Data Configuration Step by step wizard that guides the user to configure thresholds and cellrefs and also select data to process into the repository. Summary Dashboard From the Repository Dashboard, the user can choose to further investigate and perform either Event based or Radio Network analyses. Spotlight Report(s) Identifies critical and important issues, and provides links to summary statistics of the loaded data files. Event Investigation/Analyses Provides a breakdown of the critical and important issues by filename and handset identifier. These tabular pages are reached through links on the Summary Dashboard. Radio Network Investigation/Analyses Provides a breakdown of the important issues by filename and handset identifier. These tabular pages are reached through links on the Summary Dashboard.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
12
Comment [sf2]: Normally, if you prefer not to use Spotlight, you can always use the legacy Analyzer Classic link. But this is not recommended since the whole point of Spotlight , is not using Analyzer to drill down. Comment [sf3]: Upon launch of the Actix software, the Choose an Engineering Process dialog shows all the Engineering Processes that you are licensed to use, and so a user's software may display other processes to those shown here. Comment [sf4]: To start a new project, click on New Project, otherwise you can either Open or Delete an existing project (if you have one). If you prefer to start with Analyzer Classic, click on Classic mode
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
13
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
14
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
15
This opens the Preferences dialog. Select a cellrefs file if you have not already done so.
3. This opens the Thresholds dialog. You do not need to make any changes here yet, but click the button to have a quick look at the dialog.
If you have selected a new cellrefs file, you will need to restart the Spotlight application and return to this point.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
16
You can also add the entire folder by clicking on Add Folder and/or Add all subfolders.
All file information is displayed. You can either add more files, more folders or remove files.
Comment [sf6]: The project will be saved to this folder: \Documents and Settings\All Users\Application Data\Actix\Analyzer\Projects (depending on your current Windows user settings). For best use, aim for at least 1GB free disk space per project. Spotlight support max populated data volume: 3Gb
Click on Done to begin your troubleshooting. Actix Software will first save the Settings and Thresholds as part of the project. The progress bar for data processing will appear and this will give you an idea of how long it will take.
Note: The entire process of loading data is dependent on the volume of data to be loaded into the project. However, once the data has been loaded into the Repository, it can be reattached very quickly.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
17
In this exercise, you will be creating your own UMTS Template and define all the related devices (handset and/or scanner if you have them), KPIs, Reports, Queries and Attributes. Lets start by creating a template as shown below:
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
18
4. Choose a template you would like to base the project on by clicking on Based on Template. 5. Click Next to start to create your template.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
19
Choose a meaningful Device Name. Actix software determines whether data from a stream should be loaded into the Device based on whether the Filter text matches any text in the data stream name. For example, if you have TemExp (1) and TemExp (2) in your logfile, Filter 1) uniquely identifies the handset stream in the file, while using an identifier that is common to many types of logfiles. If the Filter field is left empty, data from all streams will be loaded into the device.
2. Key in the Device Name. 3. Key in the Filter to uniquely identifies different devices.
4. If have a different format or device, click on Import From File to add your device filter(s).
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
20
For this exercise, select or check on all UMTS Event & Radio Network KPIs and the related UMTS reports. To ensure best load time performance, do not forget to uncheck other options you do not require. Click Next> to continue.
Choose the appropriate Event KPIs, Radio Network KPIs and Reports.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
21
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
22
Note that the regional filtering option is not shown in the above example.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
23
After clicking Done on the fifth page, you are returned to the New Project start page, where the new template appears in the list of project templates. Note that for convenience, Spotlight appends the date on which it was created to the project template's name.
Select your new template. Click Next> to continue to select the cellref file, and change the settings and configure thresholds, as described in Step 2 and Step 3 in page 15.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
24
UMTS Section
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
25
Summary Dashboard
The Spotlight Summary Dashboard provides you a quick overview of the data loaded in the current Repository project on a per device basis. If you have configured multiple devices during the template configuration phase, a separate tab per device will be displayed on the dashboard. The Summary Dashboard consists of these main components:
Click on Event Explorer to drill down to all Event-based analysis such as Dropped calls, Call setup Failures etc. Click on Radio Network Explorer to investigate all Radio Network problems and perform wide-area coverage-based analyses. Click on Log Files to display all information regarding the data file(s) youve loaded.
Click on Report to generate your UMTS Spotlight Report based on the configuration and settings youve defined. The report consists of RF parameter charts and maps with important events and attributes.
The Map is the main integral part of Spotlight interface, where it shows the entire drive with Uu_Scan_RSSI being the default attribute is plotted. The cell wedges are colour coded: Green represents site that were serving during part of the drive.
The UMTS Issues panel lists all critical and important issues occurring in the dataset. It allows you to investigate further and drill down to issues in more detail by clicking on the link of the KPIs. The Critical Issues section provides an overview of the drive in terms of failure events. The Important Issues section includes the radio network analyses.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
26
At the top of the page, the navigation bar allows you to move around in Spotlight. It also provides some useful functions from any stage of your analysis:
If your current project uses Global Filters, a related link appears in the navigation bar. Click on the link to show a dialog similar to this:
This dialog allows you to specify any files or streams that you want to exclude from the analysis, and also allows you to filter by time (not shown above). Once you have specified the filter, note that you need to click the Add Filter link on the right to create the filter. If you have configured regional filtering, this dialog will also give you the option to filter by region.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
27
To close the Report, click here. To switch views, use the Window menu.
Click on one of the reports in navigation tabs such as Report, Overview, Overview Map, Radio, CS Domain and PS Domain to explore various pages of the report.
You can either click on the Save button to save report in .htm format or click on the Show Excel Report button to open the report in Microsoft Excel.
If you run the report again on different data, the map bitmaps will be updated to reflect the new data. If you then reopen the workbook that was saved earlier,
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
28
Excel asks if you want to update. Choose the Don't Update option, or the maps will be updated with the data from the latest running of the report. The Save button exports the report as a web page. Note that the web page has an associated subfolder with a unique name containing various image and other files relating to that report. However, the image files in each subfolder are always called image1.gif, image2.gif, which may cause you problems in some situations. To close the report, click on the X on the far right of the application menu options. If you have a map also open, you can switch between the report and the map view using the Window menu options.
Click on any of the navigation tabs such as Report, Overview, Overview Map, Radio, CS Domain and PS Domain to explore various pages of the report.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
29
Maps with Measurements and Failure Events help you to visualize the problem better and to create an appealing report.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
30
Report: Radio
Statistics and histogram give you a quick overview of the statistics (min, max, average etc.) and the distribution of the EcIo and RSCP analyses.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
31
CS Call Information drills down to each call and provides call information based on your log file. Call Drops are highlighted in Red while Call Setup Failures are highlighted in Orange. Note that the PS Domain Report looks similar except that only PS call information is displayed.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
32
Event Explorer
The Event Explorer provides a detailed analysis of critical failure events such as Call Drops and Call Setup Failure. You could arrive at this page from the Summary Dashboard because of clicking on a Critical Issue or on the Event Explorer icon. Spotlight contains the following Event Explorer pages for you to perform a wide range of analyses: Circuit Switched Dropped Calls Call Setup Failures Location Update Failures Handover Issues Handover Failures Missing Neighbors (Only available for Handset and Scanner data files, using the handset and scanner merge feature) Information only % Strong NBR Diff Baud (better than the serving cell) % NBR with 5dB (within 5dB of the serving cell) % NBR with 5dB Diff Baud (within 5dB of the serving cell but different frequency)
The table in the top panel has a row for each site and lists the failure rates for that site. On the bottom side panel, there is a list of all the dropped calls
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
33
occurring in the drive. If you select a check box in one of the rows, the bottom side panel will only show the events appearing for the site or sector in that row.
Click on Select Category to select the technology, if you have loaded different technology logfiles.
Click on Event Explorer on the top panel to go to the event dashboard page.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
34
View only
You can sort by the Diagnostics column to view the diagnostic types grouped alphabetically.
If the top table shows high values for a particular problem KPI, check the top left hand box to enable the selection boxes for each row. Then check each row with high problem KPIs. The side panel is now filtered to show the events appearing for only the selected site or sector rows. If there are too many rows in the table, you might want to sort by the Diagnostics column to see the diagnostic types grouped alphabetically.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
35
Additional Features
You can narrow down your results by choosing which analysis you want to perform, applying filter, displaying your selected attributes or events you would like to look at.
Category
Choose a suitable KPI category that you would like to look at quickly to narrow down your result.
Add Filter
Create or Add filter or filters to cut down the outcome and bring you closer to your desire result. You can also delete your filter by clicking on Remove Filter or Remove All.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
36
Attributes
To help you to understand the problem better, you can visualize more attributes by displaying them on the map. Select the attributes you would like to display on current map from the Attributes drop down list.
Events
You can also view different types of failure events, Pilot Pollution, Too Many Server etc by selecting them from the Events drop down list. If youve loaded other technology logfile, the relevant events will be displayed in the drop down list.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
37
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
38
File-based drilldown: Load the entire file containing the event and analyze further.
Drilldown illdown
Until this stage, the analysis has been based the database. If you would like to drill down further to message level, click on Begin Drilldown.
Time Window drilldown: Specify a time window before and after the event and Actix software will only load data for that window (fastest loading and best time performance).
The table on the left shows a row for each Dropped Call event selected for further drilldown, together with a diagnosis of the cause. There are a few additional views to help analyze the event in more detail. A map and the UMTS Event Navigator window display attributes relating to the selected event. There is also a Protocol Stack Browser providing detailed messaging
1. 2. 3. Check on Load entire file if you would like to load the whole file. Note that this will take longer. Key in the desire time in seconds for Before and After box. Check on Load All Devices if you have collected handset and scanner data together, and would like to load all the devices combined. Click on Begin Drilldown to extract detail information (up to message level) from the database.
around the event. Note: All the views will only have data for the specified time window.
4.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
39
This view (screen layout) provides most of the information needed to diagnose a dropped call. It can be modified by saving a new screen layout.
The UMTS Event Navigator State Form shows the event and SC.
The Protocol Stack Browser provides detailed messaging around the event.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
40
The UMTS Issues or Important Issues side panel on the Summary Dashboard provides a link to each of the above analysis. Click on a link to go to the corresponding Radio Network analysis section, or click on Radio Network Explorer to go to the corresponding radio network analysis section.
Click on Radio Network Explorer on the top panel to go to the Radio Network dashboard page. Click on a link to go to the corresponding Radio Network analysis section.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
41
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
42
Top Panel
Summary information is displayed in the top panel. When no rows are selected, overview information is displayed in the side panel. The top panel includes the following tabular form information on the sites: Scanner
o o o EcNo, RSCP (Max, Min, Av) > Beam Percentage of points outside the cell beamwidth > 180 Beam Percentage of points outside the 180 Beamwidth
Handset
o o EcNo, RSCP (Max, Min, Av) Link Diff. This is the difference between UL and DL pathloss and is used to highlight cell with possible LNA (TMA) issues. That is if the difference is greater the 8dB Downlink Interference factor Percentage of coverage issues System interference Limited coverage Poor UL & DL
o o
Note: Clicking on a row in this table causes the side panel to display more information about the site. The map zooms to the site and displays the sites coverage.
Map
When a row is clicked in the top panel or a site is clicked on the map, the map shows the coverage wedge for the selected cell, EcIo and RSCP. The red circle represents the user-configured coverage design boundary, and data points outside this circle represent overspill.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
43
Side Panel
This displays various KPI values for the site selected and a histogram of the distances at which the cell was measured.
Best Server and Where Seen modes for handset and scanner can be selected from the Analysis drop-down menu.
Sort all information by clicking on the headings of the top panels table.
Cell Coverage This panel displays on the Quality tab various KPI values for the site selected and the Distance tab shows a histogram of the distances at which the cell was measured.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
44
Changing the thresholds value will only take effect after the next load of data.
1. Click on the issue link to open the Cell Coverage analysis page. 2. The Issues panel showed a high percentage of System Interference issues, so examine the top table of the analysis for indications of poorly performing cells.
Several rows have a low sample count and so are unreliable to use in this investigation. To remove rows with low sample counts, apply a filter.
Note that all samples less than 50 are not displayed after the filter is applied.
3. Sort by Average EcIo and color the cells by EcIo by clicking on the icon beside the column heading.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
45
4. Examine the map and note that there are some samples with poor EcIo, despite being very close to the problem sector. Note that drive test data is binned according to the selections made in step 4 of defining the project template. However, any events displayed on the map (for example, by using the Events drop-down menu) will use the exact position rather than a binned position, so events might not align with the data points.
5. Are any other cells interfering to cause this situation? Experiment with plotting various Events and Attributes.
Plotting the Uu_ActiveSet_Count attribute shows that there is only one clear server, Site 0433 Sector C. This may indicate a missing neighbor or maybe not.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
46
6. Click on the 3G Missing Neighbors tab. Note that the map and table keep the focus on the selected cell.
Seems like there is no recommendation for Addition - there is no missing neighbor in this example.
Continue with the next Missing Neighbors exercise to find a good example of a missing neighbor.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
47
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
48
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
49
3. Sort by the Additions column in the top table to find out which site/sector has the highest number of missing neighbors.
You can now see the sector with the highest number of recommended additions to its neighbor list.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
50
4. Click on the top row in the table to show information for that sector.
A Green line indicates the selected sector is recommended to be added, while a red line indicates that the selected sector should be removed.
The thickness of the line indicates the higher percentage, i.e.: Site 0342 sector b1 should be retained (the line is blue) because it has been scanned of total 28.6% and it is a co-sector of sector a1.
The map now shows green lines to each recommended additional neighbor. The thickness of each line shows how well the suggestion meets the criteria of the analysis. The circle represents the user-defined radius (Maximum Intersite Distance) used by the analysis to identify potential neighbors. The map also displays the data points used in the analysis. Note that drive test data is binned according to the selections made in step 4 of defining the project template. However, any events displayed on the map (for example, by using the Events drop-down menu) will use the exact position rather than a binned position, so events might not align with the data points.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
51
5. Examine each suggested additional neighbor. You may have reasons for refusing to accept the suggestion on geographical grounds (for example, existing cells between the sector and the suggested addition), or for reasons related to the data settings. If you disagree with a suggested addition, you may want to use the SC Search feature to find an alternative sector to add to the neighbor list. Note that in this case you will not be able to output your choice, and will need to make the correction to the switch manually (for example, by editing the CSV file).
6. If you accept all suggestions for a sector, you can click the related button in the table to mark your choice.
Note that the number beside the button changes to match your selection.
7. Repeat this process for each row in the top table, as necessary.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
52
8. You can now go through the same process for the 'Removals' column. Note that by default the map does not show lines for removal recommendations. 9. Once you are satisfied with the recommendations that you have selected, you can output them to a CSV file. From the top of the page, click the Export Data link.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
53
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
54
Device
Choose the device (handset or scanner) that you would like to look at. In this example, there is only one device All, where everything is grouped together.
Find SC
Visualize an SC on the map. Specify an SC and this feature colors red all the sites using this SC. Key in the SC you would like to search for in the Scrambling Code field. Click on Search to search for the SC 273. Note SC 273 is highlighted in RED in the map:
Filter
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
55
Data Settings
(See Appendix B for details)
Export Data
Select this link to export neighbor recommendations to a CSV file.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
56
Add Filter
Create or Add filter or filters to cut down the outcome and bring you closer to your desire result. You can also delete your filter by clicking on Remove Filter or Remove All.
Attributes
To help you to understand the problem better, you can visualize more attributes by displaying them on the map. Select the attributes you would like to display on the current map from the Attributes drop down list.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
57
Events
You can also view different types of failure events by selecting them from the Events drop down list.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
58
Sort by Additions column to find out the recommendation of which missing neighbor sites/sectors should be added.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
59
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
60
2. If you have not done so before, check the data settings that control the algorithm for neighbor list analysis. In this example, we will be interested in the Minimum Sample Count and the Addition Threshold. If you alter a data setting, the analysis will immediately update.
3. Sort the top table by the Additions column. You can now see the sector with the highest number of recommended additions to its neighbor list. Check that the Server Count column shows an acceptable value (you can also define a cutoff threshold using the Minimum Sample Count as shown above).
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
61
4. Click on the top row in the table to show information for that sector.
There are many additions in this example as the cellrefs file does not contain any 3G-2G neighbor definitions - therefore there are also no retentions or removals suggested.
The side panel on the left shows each recommendation for a sector individually, sorted by the % of data points that meet the recommendation algorithm. If you accept the suggestion, you can select the checkbox in the table to mark your choice.
The map now shows lines to the recommended additions. The thickness of each line shows how well the suggestion meets the criteria of the analysis. The circle represents the user-defined radius (Minimum Intersite Distance) used by the analysis to identify potential neighbors. It also displays the data points used in the analysis.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
62
5. Select and examine a few suggested additional neighbors. If you accept all suggestions for a sector, you can select the related checkbox in the table to mark your choice. Note that the number beside the button changes to match your selection. For example, there were 178 suggested additions in the first row, with none currently selected for export, the number would show 0/178.
If you clicked, read 178/178. If you do not want to select every recommendation for a sector, you can use the table in the side panel on the left. So if you selected 13 additions, this would result in that number - useful if, as in this example, there are many recommendations, and you need to keep track of how many you have already selected. If you refuse to accept the suggestion, for example because there is no 3G-2G neighbor data in the cellrefs file, the sheer number of suggested additions is 51, compared with the maximum permitted number of 32. Note that the more potential neighbors you add, the longer it will take a handset to find appropriate neighbors, conceivably resulting in a dropped call. You may well have an upper limit already defined by your internal guidelines.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
63
6. If you disagree with a suggested addition, you may want to use the View SC feature to find an alternative sector to add to the neighbor list. Note that in this case you will not be able to output your choice, and will need to make the correction to the switch manually (for example, by editing the CSV file).
7. Repeat this process for each row in the top table, as necessary. 8. You could now go through the same process for the 'Removals' column (this example contains no 'removals' suggestions). Note that by default the map does not show lines for removal recommendations. 9. Once you are satisfied with the recommendations that you have selected, you can output them to a CSV file. From the top of the page, click the Export data link.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
64
Interface
The interface consists of the following components: Top Panel Summary information is displayed in the top panel. It includes in a tabular form the number of pilot pollution events for each site, and the total number of inbound/outbound polluters. Clicking on a row in this table causes pilot pollution information for the selected cell to be displayed in the side panel, and lines to polluters to be drawn on the map. Note that you can click on the icon at the left of the table to export this information in a CSV file. Map When you click a row in the top panel or on a site on the map, lines to inbound as well as outbound pollution are drawn from that site. All the pilot pollution events involving the site are also plotted on the map. The lines to polluters have a direction arrow suggesting inbound or outbound pollution.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
65
Side Panel Details of the inbound and outbound pollution for the selected site.
You can choose any of the following Analysis types:
Inbound cells are where the selected sector is being polluted by other sectors. Inbound pilot pollution lines are drawn in blue. Rolling over the lines with the cursor displays more detailed information.
Outbound cells are where the selected sector is polluting other sectors. All Inbound and Outbound sites and cells (sectors) of the selected sector is listed in the Cell Pilot Pollution Details panel. You can click on the icons on the left to export the related information in a CSV file. Outbound pollution lines are drawn in red from the selected sector to the sectors being polluted. The arrow on each line points from the polluting sector to the polluted sector. The thickness of the lines indicates the degree to which pilot pollution was detected for the selected sector, based on the loaded data.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
66
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
67
In this example, sector 0433b1 looks like the best candidate for investigation as it has a high number of Too Many Servers events, and Outbound and Inbound Cell polluters.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
68
3. De-select the Inbound Cells box to hide the inbound polluting lines. The map now highlights the selected sector.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
69
5. On the map, to show lines to cells, drag a box around the area with a cluster of Too Many Server events by using the Area Select in the map.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
70
There is no clear dominator in this area, and a few polluting cells are some distance away, so you would need to improve the coverage in that area.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
71
6. In the image below, the EcIo values have been plotted on the map to confirm the situation near the Too Many Server events.
7. To see how the selected sector is polluting other sectors, from the top table, de-select Inbound Cells and select Outbound Cells.
8. The selected sector is causing pollution at quite a distance, past much closer sectors. This confirms that the selected sector may need some downtilt to avoid causing the pollution and to increase nearby coverage. Use the Cell Coverage tab to see how best to improve the coverage for the selected sector.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
72
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
73
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
74
GSM Section
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
75
Click on Event Explorer to drill down to all event-based analyses such as Dropped Calls, Call Setup Failures etc.
Click on Radio Network Explorer to investigate all Radio Network problems and perform wide area coverage-based analyses.
Click on Log Files to display all information regarding the data file(s) youve loaded. Click on Reports to generate your GSM Spotlight Report based on the configuration and settings youve defined. The report consists of some RF parameter charts and maps with important events and attributes. The Map is an integral part of theSpotlight interface, showing the entire drive, with RxLev being the default attribute plotted. The cell wedges are colour coded: Green represents site that were serving during part of the drive.
The GSM Issues panel lists all critical and important issues occurring in the dataset. It allows you to further investigate and drill down to issues in more detail by clicking on the link of the KPIs. The Critical issues section provides an overview of the drive in terms of failure Events. The Important Issues section includes the Radio Network analyses.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
76
At the top of the page, the navigation bar allows you to move around in Spotlight. It also provides some useful functions from any stage of your analysis:
If your current project uses Global Filters, a related link appears in the navigation bar. Click on the link to show a dialog similar to this:
This dialog allows you to specify any files or streams that you want to exclude from the analysis, and also allows you to filter by time (not shown above). Once you have specified the filter, note that you need to click the Add Filter link on the right to create the filter. If you have configured regional filtering, this dialog will also give you the option to filter by region.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
77
To close the Report, click here. To switch views, use the Window menu.
Click on one of the reports in the navigation tabs, such as Report, File Overview, Overview Map, Radio and CS Domain to explore various pages of the report.
You can either click on the Save button to save the report in .htm format, or click on Show Excel Report button to export the report to Microsoft Excel format. Note that if you run the report again on different data, the map bitmaps will be updated to reflect the new data. If you subsequently reopen the workbook that was saved earlier, Excel will ask if you want to update. It is important that you choose the Don't Update option, or the maps will be updated with the data from the latest running of the report. The Save button exports the report as a web page. Note that the web page has an associated subfolder with a unique name containing various image and other files relating to that report. However, the image files in each subfolder are always called image1.gif, image2.gif, which may cause you problems in some situations.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
78
If you run the report again on different data, the map bitmaps will be updated to reflect the new data. If you then reopen the workbook that was saved earlier, Excel asks if you want to update. Choose the Don't Update option, or the maps will be updated with the data from the latest running of the report. The Save button exports the report as a web page. Note that the web page has an associated subfolder with a unique name containing various image and other files relating to that report. However, the image files in each subfolder are always called image1.gif, image2.gif, which may cause you problems in some situations. To close the report, click on the X on the far right of the application menu options. If you have a map also open, you can switch between the report and the map view using the Window menu options.
Click on any of the navigation tabs, such as Report, File Overview, Overview Map, Radio and CS Domain to explore various pages of the report.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
79
Maps with Measurements and Failure Events help you to visualize the problem better and create a more appealing report.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
80
Report: Radio
Statistics and histograms give you a quick overview of the statistics (min, max, average, etc.) and the distribution of the RxQual and RxLev analysis.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
81
Report: CS Domain
Call Information drills down to each call and provides call information based on your log file. Call Drops will be highlighted in Red while call setup failure will be highlighted in Orange.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
82
Event Explorer
The Event Explorer provides a detailed analysis of critical failure events such as Call Drops and Call Setup Failures. You could arrive at this page from the Summary Dashboard as a result of clicking on a Critical Issue or on the Event Explorer icon. Spotlight contains the following Event Explorer pages for you to perform a wide range of analyses: Circuit Switched Dropped Calls Call Setup Failures Location Update Failures Handover Issues Handover Failures Missing Neighbors (Only available for Handset and Scanner data files, using the handset and scanner merge feature) Information only % Strong NBR Diff Baud (better than the serving cell) % NBR with 5dB (within 5dB of the serving cell) % NBR with 5dB diff Baud (within 5dB of the serving cell but different frequency) The table in the top panel has a row for each site and lists the failure rates for that site. On the bottom side panel, there is a list of all the dropped calls occurring in the drive. If you select a check box in one of the rows, the bottom side panel will only show the events appearing for the site or sector in that row.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
83
Click on Event Explorer on the top panel to go to the Event dashboard page.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
84
You can sort by the Diagnostics column to see the diagnostic types grouped alphabetically.
View Only
If the top table shows high values for a particular problem KPI, check the top left hand box to enable the selection boxes for each row. Then check each row with high problem KPIs. The side panel is now filtered to show the events appearing for only the selected site or sector rows. If there are too many rows in the table, you might want to sort by the Diagnostics column to see the diagnostic types grouped alphabetically.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
85
Additional Features
You can narrow down your results by choosing which analysis you want to perform, applying a filter, or displaying your selected attributes or events you would like to examine.
Category
Choose a suitable KPI category that you would like to look at quickly, one which reduces the clutter of KPIs in the top table.
Add Filter
Create or Add filter or filters to cut down the outcome and bring you closer to your desire result. You can also delete your filter by clicking on Remove Filter or Remove All.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
86
Attributes
To help you to understand the problem better, you can visualize more attributes by displaying them on the map. Select the attributes you would like to display on the current map from the Attributes drop down list.
Events
You can also view different types of failure events by selecting them from the Events drop down list.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
87
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
88
Drilldown
Up till this stage, the analysis has been generated from the database. If you would like to drill down further to message level, click on Begin Drilldown to drilldown further.
Check on the Drill Down checkbox of the event that you would like to drill down to. File-based drilldown: Load the entire file containing the event and analyze further. Time Window drilldown: Specify a time window before and after the event and Actix software will only load data for that window (fastest loading and best time performance). 1. 2. 3. Check on Load entire file if you would like to Load the whole file. Note that this will take longer time. Key in the desire time in seconds for Before and After box. Check on Load All Devices if you have collected handset and scanner data together, and would like to load all the devices combined. Click on Begin Drilldown to extract detail information (up to message level) from the repository (database).
4.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
89
This view (screen layout) provides most of the information needed to diagnose a dropped call. It can be modified by saving a new screen layout.
Poor RxLev and poor Quality when call dropped is shown on GSM Line Chart State Form. The chart also shows the RxLev, Rx Qual and UE TxPower.
Comment [sf8]: This set of views displayed (Screen Layout) can be modified by the user by saving new screen layout.
Handover Failure right before the call dropped is shown on GSM Troubleshooter Navigator State Form. It shows the event and serving BCCH.
Protocol Stack Browser provides detail messaging around the event. Note that there was a Handover Failure before the drop.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
90
Click on Radio Network Explorer on the top panel to go to the Radio Network dashboard page.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
91
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
92
Top Panel
Summary information is displayed in the top panel. When no rows are selected, overview information is displayed in the side panel. It includes in tabular form information on the sites, containing the following information: BCCH # - Number of samples. Ensure that you are looking at a statistically sensible number of samples. > Dist. - Number of samples greater than the coverage design boundary (defined by SL_Overspill_Dist_Threshold). RxQual, RxLev, (Av, Max, Min). Note that clicking on the icon only displays the Average value. % > Beam Percentage of points outside the cell beamwidth. % >180 Beam Percentage of points outside a hypothetical beamwidth of 180 degrees. Link Diff This is the difference between UL and DL pathloss and is used to highlight cell with possible LNA (TMA) issues, if the difference is greater the 8 dB, where: UL = UE Tx Power - BTS Sensitivity + BTS Antenna Gain DL = BTS EIRP - RxLevSub Poor Ql % and Poor Lv % combined with No Dom % (see Coverage Criteria in page 103 for details).
Note: Clicking on a row in this table causes the side panel to display more information about the site. The map zooms to the site and displays its coverage.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
93
Map
When a row is clicked in the top panel or a site is clicked on the map, the map shows the coverage wedge for the selected cell, RxLev (and RxQual for best server only). The red circle represents the user-configured coverage design boundary, and data points outside this circle represent overspill.
Side Panel
This displays various KPI values for the site selected and a histogram of the distances at which the cell was measured (see the next section for examples).
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
94
Note: In the where seen mode, coverage footprint for only the cells that were best servers in the drive can be visualized.
Best Server and Where Seen mode can be selected from the Analysis drop down menu.
Sort all information by clicking on the headings of the top panels table.
In this example, the Quality tab of the side panel shows a percentage of Poor RxQual at the same time as Good RxLev, which usually indicates interference.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
95
The Distance tab shows the distance at which the cell was measured:
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
96
You can also use the Area Select button to drag a box around all binned data points for which you want to display Info:
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
97
Additional Features
These are some additional features available at this interface: Filters The table on the top panel can be filtered by adding filters through this dialog. Attributes drop down menu Select one or more commonly used attributes to plot on the map Events drop down menu Select one or more events to plot on the map Analysis drop down menu Select handset (Best Server or Where Seen) Show Overview Clicking on this link will display an overview of Grade of Service for the entire drive. You can narrow down your results by choosing which analysis you want to perform, applying filter, displaying your selected attributes or events you would like to look at.
Choose the device (handset or scanner) that you would like to look at. In this example, there is only one device All, where everything is grouped together.
Device
Analysis
Where Seen is where the map will show a different footprint of the sector, where it was detected anywhere during the drive, not just the strongest signal. Note: The coverage footprint for only the cells that were best servers in the drive can be visualized. Best Server is by selecting the row will select the cell on the map will show the areas on the map where the selected cell has been detected as the strongest cell.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
98
Add Filter
Create or Add filter or filters to cut down the outcome and bring you closer to your desire result. You can also delete your filter by clicking on Remove Filter or Remove All.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
99
Attributes
To help you understand the problem better, you can visualize more attributes by displaying them on the map. Select the attributes you would like to display on the current map from the Attributes drop down list.
Events
You can also view different types of failure events by selecting them from the Events drop down list.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
100
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
101
Exercise: No Dominance
The Summary Dashboard shows a Important Issue: '% area with No Serving Cell Dominance' (See Coverage Criteria on page 103 for details)
Click on the no Serving Cell Dominance link to open the Cell Coverage analysis page.
1. Click on the issue link to open the Cell Coverage analysis page. 2. Note that several rows in the top table have a low sample count, '#', and so are unreliable to use in this investigation. 3. To remove rows with low sample counts, apply a Filter with a threshold of, say, 50 counts. Click Add Filter and OK.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
102
4. From the Attribute drop-down menu, select an attribute to plot on the map, based on the related Important Issue from the Summary Dashboard (for this example, No Serving Cell Dominance):
Important Issue Poor Voice Quality Poor Signal Strength Attribute ServRxQualSub ServRxLevSub
The attribute is used in the calculation to identify the issue, as explained in Coverage Criteria on page 103. Note: The drive test data is binned according to the selections made in defining the project template earlier. However, any events displayed on the map (for example, by using the Events drop-down menu) will use the exact position rather than a binned position, so events might not align with the data points. 5. Examine the top panel summary information, which provides indications of poorly performing cells relating to the Important Issue, and select likely candidate rows.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
103
In the example below, a problem row has been selected. The first map image shows the 'NumNeighbors within 5 dB' attribute, which highlights an area of poor dominance (drawn in red). The second map image shows RxLev (Where Seen) plotted for the same sector, which shows that it covers an unnecessarily large area. This could be corrected by applying some downtilt to the sector.
Coverage Criteria
Condition Top table column or Quality tab 1 Poor Quality, Poor Ql Poor Level, Poor Lv No Dom Criteria
ServRxQualSub < G_RxQualSub_Max threshold ServRxLevSub < G_RxLevSub_Min threshold If the sum of all these conditions is > 2: ((ServRxLevSub-NborRxLev[n])<5) * (abs(ServBCCH-NborBCCH[n])<375), where n is 0 to 5. Where none of the above conditions is true.
Good Design
G. Design %
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
104
1. Sort by % RxQual
2. Select a sector with good RxLev and poor RxQual (Inteference). Click on the sector to zoom in to that area. By clicking on Visualization tab, the Distance Chart will be displayed:
By clicking on Distance tab, the Distance Chart will display a histogram of the distances at which the cell was measured:
This is the percentage of data points where one (or more than one) condition applies.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
105
The red circle in the map displays the maximum range for the analysis, as defined in Tools Thresholds Spotlight SL_Overspill_Dist_threshold.
Orange color is for upper adjacent channel interference. You can set your G_Interference_Radius threshold at Tools Display Thresholds GSM Cell_Plan_Viewer as below:
And set the threshold unit either in KM or Miles at Tools Preferences General Settings Distance Units
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
106
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
107
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
108
Spotlight
SL_Overspill_Dist_Threshold
This threshold is used, if there is no Max_ServerDist information in the cellref and indicates the maximum serving distance (in meters) a cell should serve. Default is 5000m.
UMTS / Scan_coverage
Uu_Scan_PilotPollutionThreshold
In calculating Pilot Pollution, this threshold sets up the level of interference required for pegging the events (based on scanner info). When 4 or more pilots are above this threshold, it creates a pilot pollution event. Recommended value is -15dB and the minimum and the maximum should be around -18 and -10 dB.
Uu_Scan_Poor_EcNoThreshold
This is used to indicate poor EcIo values from scanner data. Recommended value is -15 dB and should lie between -18 and -10 dB.
Uu_Scan_Poor_RSCP_Threshold
This is used to indicate poor RSCP values from scanner data. Recommended value is -95 dBm and should not be lower than -105 dBm.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
109
Uu_Scan_TooManyServersThreshold
In calculating "Too Many Servers", when 4 or more pilots (including the best server) are within the threshold value in dB of the best server, it creates a "too many server" event (based on scanner info). Recommended value is 5 dB and the minimum and the maximum should be around 1 and 10 dB.
UMTS / Spotlight
SL_Ant_Gain_Threshold
This threshold is the default Antenna gain, used in the calculation of pathloss. The default value is 18.4 dB.
SL_BLER_Threshold
This threshold is used for determining a UMTS lost DL channel condition. The default value is 10 dB.
SL_BTS_Sens_Threshold
This threshold is the default BTS receive Sensitivity, used in the calculation of UL pathloss. The default value is -120 dBm.
SL_Detectedset_EcIo_Threshold
This threshold is used for determining if a detected set member strong enough to be consider as a neighbor. The default value is -15 dB.
SL_EIRP_Threshold
This threshold is the default EIRP, used in the calculation of DL pathloss. The default value is 50.
SL_MaxTimeBetweenRRC_REQandCallStart
This threshold is used for determining UMTS CS calls with excessive setup time. Recommended value is 6000 ms.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
110
SL_RapidPathloss_EcIo_Threshold
This threshold is used in Rapid Pathloss detection, a condition of which is that EcIo has dropped by at least this threshold value within the defined time window. The RSCP condition must also be met for Rapid Pathloss to be detected. The default value is 5 dB.
SL_RapidPathloss_RSCP_Threshold
This threshold is used in Rapid Pathloss detection, a condition of which is that RSCP has dropped by at least this threshold value within the defined time window. The EcIo condition must also be met for Rapid Pathloss to be detected. The default value is 5.
SL_RapidPathloss_Time_window_Threshold
This threshold is used to define the window over which Rapid Pathloss is performed. The default value is 3000 ms.
SL_Site_Issues_Dist_Threshold
This threshold is used in the outside beamwidth analysis, and only data within this distance from the site is considered for the analysis. The default value is 5000m.
SL_UMTS_DT_Troubleshooter_CriticalIssues_Threshold
This threshold is used to filter out critical issues from the UMTS dashboard that are equal or less then this value. Recommended value is 0.
SL_UMTS_DT_Troubleshooter_ImportantIssues_Threshold
This threshold is used to filter out Important issues from the UMTS dashboard that are equal or less then this value. Recommended value is 0.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
111
UMTS / UE_Coverage
Uu_CoverageLimitedUE_TxPowerThreshold
This is used in the Coverage Limited event. If the UeTransmittedPower is greater than Uu_CoverageLimitedUE_TxPowerThreshold AND the CPICH_RSCP_in_ActiveSet is less than Uu_Poor_RSCP_Threshold AND the CPICH_EcNo_in_ActiveSet is less than Uu_Poor_EcNoThreshold, then a Coverage Limited event will appear on the map. Recommended value is 10 dBm. The minimum should not be lower than 0 and the maximum should not be higher than 25 dBm.
Uu_EcNoInterferenceThreshold
This is used in conjunction with the RSCP Interference Threshold for the System Interference event. If the CPICH_RSCP_in_ActiveSet is greater than Uu_RSCP_Interference_Threshold and the CPICH_EcNo_In_ActiveSet is less than Uu_EcNoInterferenceThreshold, then a System Interference event appears on the map. Recommended value is -15 dB. Values should lie between -10 and 18 dBm.
Uu_HighUE_TxPower
This is used in the Poor Uplink Coverage event. If the UeTransmittedPower is greater than Uu_HighUE_TxPower AND the CPICH_RSCP_in_ActiveSet is greater than Uu_Poor_RSCP_Threshold AND the CPICH_EcNo_in_ActiveSet is greater than Uu_Poor_EcNoThreshold, then Poor Uplink Coverage will appear on the map. Recommended value is 15 dBm. Values should lie between 0 and 25 dBm.
Uu_LowUE_TxPower
This is used in the Poor Downlink Coverage event. If the UeTransmittedPower is less than Uu_LowUE_TxPower AND the CPICH_RSCP_in_ActiveSet is less than Uu_Poor_RSCP_Threshold AND the CPICH_EcNo_in_ActiveSet is less than Uu_PoorEcNoThreshold, then the Poor Downlink Coverage event will appear on
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
112
the map. Recommended value is -15 dBm. Values should lie between -30 and 0 dBm.
Uu_PilotPollutionThreshold
In calculating Pilot Pollution, this threshold sets up the level of interference required for pegging the events. When 4 or more pilots are above this threshold, it creates a Pilot Pollution event. Recommended value is -15 dB and should lie between -18 and -10 dB.
Uu_Poor_EcNoThreshold
This is used in the Coverage Limited event. If the CPICH_EcNo_in_ActiveSet is less than Uu_PoorEcNOThreshold AND CPICH_RSCP_in_ActiveSet is less than Uu_Poor_RSCP_Threshold AND Ue_TransmittedPower is greater than Uu_CoverageLimitedUE_TxPowerThreshold, then a Coverage Limited event will appear on the map. It is also used in the Poor Uplink and Downlink Coverage event. Recommended value is -15 dB and should lie between -18 and -10 dB.
Uu_Poor_RSCP_Threshold
This is used in three different events. In the cases where CPICH_RSCP_in_ActiveSet is lower than Uu_Poor_RSCP_Threshold, it will trigger either a Coverage Limited event or a Poor Downlink Coverage event. In the case where it is greater than Uu_Poor_RSCP_Threshold, it will trigger a Poor Uplink Coverage event. Other conditions must be satisfied for these events to occur please note the other thresholds involved. Recommended value is -95 dBm and should not be lower than -105 dBm.
Uu_RSCP_InterferenceThreshold
This is used for the System Interference event. If the CPICH_RSCP_in_ActiveSet is greater than this threshold and the CPICH_EcNo_in_ActiveSet is less than
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
113
Uu_Poor_EcNoThreshold, then a System Interference event appears on the map. Recommended value is -80 dBm and should lie between -90 and -60 dBm.
Uu_TooManyServersThreshold
In calculating "Too Many Servers", when 4 or more pilots (including the best server) are within the threshold value in dB of the best server, it creates a "too many server" event (based on scanner info). Recommended value is 5 dB and the minimum and the maximum should be around 1 and 10 dB.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
114
For each data point, the algorithm creates a candidate list that includes those SCs within the Reporting Range value of the strongest signal. For example, if the strongest signal is -4 dBm, the default value of 5 dB would include in the candidate list all weaker SCs with signal strengths down to -9 dBm. Defines the percentage of samples that must be reached to trigger a cell being added as a suggested neighbor. This is used to reduce the effect of stray signals. Defines the minimum percentage of samples that cells in the current neighbor list must achieve in order to be recommended for retention in the list. When the percentages of samples fall below this threshold, cells will be recommended for removal from the list. Only sectors which have been measured above the Ec/Io Threshold at least this many times will be included in the analysis. Note that the algorithm works off Binned data. Used for 3G-2G Neighbor Analysis. Depending on which measurement your network uses for determining when to hand over, select EcIo, RSCP, EcIo or RSCP, or EcIo and RSCP.
0.2
Minimum Samples
50
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
115
Setting
Description
Defines the maximum line-of-sight distance in meters between two cells for one to be considered for inclusion on the other's neighbor list. For rural areas where the average intersite distance is naturally greater than a dense urban environment, use a higher value. To disable this feature, set this value to 0.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
116
Setting
Default value 90
Description
Defines the maximum angle between the edge of a cell's beam width and the data point, for that cell to be considered for inclusion in the serving cell's neighbor list.
In this example, the beam width is shown as a darker blue arc, and the angle to site threshold in lighter blue arcs on either side. Acceptable data points are within this threshold of the candidate sector's beam width, and are also within the Maximum Intersite Distance (the blue circle). This threshold ensures that missing neighbors are not suggested from reflected signals or back-lobes, and also that only cells angled towards the data point are suggested. To disable this feature, set this value to 0. Only process first best SC Select ed Select this option to analyze the neighbors of the best cell only. De-select this option if you want to analyze the neighbor list of all of the cells within the reporting range.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
117
Setting
Default value 15
Description
Maximum Size
Defines the maximum number of candidates in the candidate list. Used for 3G Neighbor Analysis. Select this option for the current neighbor list in the cellrefs file to be considered for additions and removals. Used for 3G-2G Neighbor Analysis. A neighboring cell must have an EcIo of less than or equal to this value to be included on the potential neighbor list. Used for 3G-2G Neighbor Analysis. A neighboring cell must have an RSCP of less than or equal to this value to be included on the potential neighbor list.
Select ed
-100
Once a potential neighbor list has been calculated for each data point, they are aggregated by serving cell to produce the recommended neighbor list. This is compared with the existing list to calculate which are additions, retentions and removals.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
118
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
119
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
120
Dropped Calls Diagnosis System Released Condition and notes When the cause code is Not Normal (0-31, 42) in either the NAS message or the RRC message. Missing Neighbor SC in Active Set after event < > SCs in Active Set and Neighbor list before event. Handover Problem Multiple Active Set update messages are received and a particular SC is not added to the Active Set. For the Raked RF Condition, the system picks the diagnosis with the highest value, providing it is higher than the specified threshold: Pilot Pollution 4+ pilots in Active or Monitored Set with Ec/No > Uu_PilotPollutionThreshold (-15 dB). Pilot Pollution: Too Many Servers 4+ pilots in the Active or Monitored Set with Ec/No within Uu_TooManyServersThreshold dB of the best server (Uu_ActiveSet_EcNo_0). Interference Problem CPICH_EcNo_in_ActiveSet < Uu_EcNoInterferenceThreshold (-15 dB) AND CPICH_RSCP_in_ActiveSet > Uu_RSCP_InterferenceThreshold (-80 dBm).
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
121
Dropped Calls Diagnosis Coverage Limitation Problem Condition and notes CPICH_EcNo_in_ActiveSet < Uu_Poor_EcNoThreshold (15 dB) AND CPICH_RSCP_in_ActiveSet < Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower > Uu_CoverageLimitedUE_TxPowerThreshold (10 dBm). Poor DL Coverage Problem CPICH_EcNo_in_ActiveSet < Uu_PoorEcNoThreshold (-15 dB) AND CPICH_RSCP_in_ActiveSet < Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower < Uu_LowUE_TxPower (-15 dBm). Poor UL Coverage Problem CPICH_EcNo_in_ActiveSet > Uu_Poor_EcNoThreshold (15 dB) AND CPICH_RSCP_in_ActiveSet > Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower > Uu_HighUE_TxPower (15 dBm). Lost DL Channel Over 5-seconds, on average, Uu_Trch_DownlinkBLERAGG > SL_BLER_Threshold. Investigate Further (unknown diagnosis) More investigation is needed. Use other tools and views to refine your understanding of the problem.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
122
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
123
Note that the window size used to evaluate the condition is the period from 5 seconds before the drop, up to the drop itself. Call Setup Failure Diagnosis System Rejected / RRC Failure CM Service Abort/Reject System Released When the cause code is Not Normal (0-31, 42) in either the NAS message or the RRC message. Missing Neighbor SC in Active Set after event < > SCs in Active Set and Neighbor list before event. Handover Problem Multiple Active Set update messages are received and a particular SC is not added to the Active Set. For the Raked RF Condition, the system picks the diagnosis with the highest value, providing it is higher than the specified threshold: Pilot Pollution 4+ pilots in Active or Monitored Set with Ec/No > Uu_PilotPollutionThreshold (-15 dB). Pilot Pollution: Too Many Servers 4+ pilots in the Active or Monitored Set with Ec/No within Uu_TooManyServersThreshold dB of the best server (Uu_ActiveSet_EcNo_0). A CM Service Abort / Reject message was received. Condition and notes When an RRC message contains an RRC Reject.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
124
Interference Problem CPICH_EcNo_in_ActiveSet < Uu_EcNoInterferenceThreshold (-15 dB) AND CPICH_RSCP_in_ActiveSet > Uu_RSCP_InterferenceThreshold (-80 dBm). Limited Coverage Problem CPICH_EcNo_in_ActiveSet < Uu_Poor_EcNoThreshold (15 dB) AND CPICH_RSCP_in_ActiveSet < Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower > Uu_CoverageLimitedUE_TxPowerThreshold (10 dBm). Poor DL Coverage Problem CPICH_EcNo_in_ActiveSet < Uu_PoorEcNoThreshold (-15 dB) AND CPICH_RSCP_in_ActiveSet < Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower < Uu_LowUE_TxPower (-15 dBm). Poor UL Coverage Problem CPICH_EcNo_in_ActiveSet > Uu_Poor_EcNoThreshold (15 dB) AND CPICH_RSCP_in_ActiveSet > Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower > Uu_HighUE_TxPower (15 dBm). Lost DL Channel Over 5-seconds, on average, Uu_Trch_DownlinkBLERAGG > SL_BLER_Threshold.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
125
Call Setup Failure Diagnosis Investigate Further (unknown diagnosis) Condition and notes Use other tools and views to refine your understanding of the problem.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
126
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
127
Note that the window size used to evaluate the condition is the period from 5 seconds before the drop, up to the drop itself. Excessive Calls Diagnosis Condition and notes
Multiple RRC attempts More than 1 RRC attempt. For the Coverage Issue Condition, the system picks the diagnosis with the highest value, providing it is higher than the specified threshold: Pilot Pollution 4+ pilots in Active or Monitored Set with Ec/No > Uu_PilotPollutionThreshold (-15 dB) Interference Problem CPICH_EcNo_in_ActiveSet < Uu_EcNoInterferenceThreshold (-15 dB) AND CPICH_RSCP_in_ActiveSet > Uu_RSCP_InterferenceThreshold (-80 dBm) Limited Coverage Problem CPICH_EcNo_in_ActiveSet < Uu_Poor_EcNoThreshold (15 dB) AND CPICH_RSCP_in_ActiveSet < Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower > Uu_CoverageLimitedUE_TxPowerThreshold (10 dBm)
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
128
Excessive Calls Diagnosis Poor DL Coverage Problem Condition and notes CPICH_EcNo_in_ActiveSet < Uu_Poor_EcNoThreshold (15 dB) AND CPICH_RSCP_in_ActiveSet < Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower > Uu_CoverageLimitedUE_TxPowerThreshold (10 dBm) Poor UL Coverage Problem CPICH_EcNo_in_ActiveSet > Uu_Poor_EcNoThreshold (15 dB) AND CPICH_RSCP_in_ActiveSet > Uu_Poor_RSCP_Threshold (-95 dBm) AND UeTransmittedPower > Uu_HighUE_TxPower (15 dBm) High RAB Activation Time Uu_RRC_RadioBearerSetup_r3_IEs_activationTime_0 > 229 (part of the RadioBearerSetup message) Investigate Further (unknown diagnosis) More investigation needed. Use other tools and views to refine your understanding of the problem.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
129
Spotlight
SL_Overspill_Dist_Threshold
This threshold is used if there is no Max_ServerDist information in the cellref file, and indicates the maximum serving distance (in meters) a cell should serve. Default is 5000m.
GSM / Advanced_Handover_Analysis
Dragged_Dominance_Hysteresis
This threshold is the dBm hysteresis applied to the Best Neighbor Level to trigger a loss of dominance of the server. Once a loss of dominance is triggered, and not re-established before the Dragged_HO_Window timer expires, then any subsequent Handover Failure or Dropped Call will trigger the Dragged Handover Failure or Dragged Drop. Dominance loss = ServRxLevSub < (Best_Nbr Hysteresis). The default value is 5 dBm.
Dragged_HO_Window
This threshold is the number of milliseconds that the MS must lose dominance for, before a Dragged Handover Failure or Dragged Dropped Call is triggered. The default value is 10000 ms.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
130
Ping_Pong_HO_Window
This threshold is the number of milliseconds during which a handover back to the previous cell will trigger the Ping Pong Handover Event. The default value is 6000 ms.
GSM / Analysis
G_Distance_Max
This threshold is used to determine the maximum distance allowed per cell. Typically, values in excess of 8000 meters are usually regarded as distant serving cells.
G_Handover_Min
This threshold is used in conjunction with handover to determine the minimum possible signal difference for handover to take place. Recommended values are 5-6 dB.
G_MsTxPowStepOrdered_Min
This threshold is used in conjunction with the signal strength to determine incorrect uplink power balance. This value is usually set to 0 to indicate maximum uplink power.
G_Prolong_Interf_timer
This threshold is used in conjunction with the signal strength and signal quality to determine prolong interference that is, good signal strength but bad quality in this time window will cause a prolong interference event.
G_RxLevSub_Min
This threshold is used to determine the minimum acceptable value for signal strength. Any signal below this threshold is categorized as poor coverage. Recommended value: -95 dBm.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
131
G_RxQualSub_Max
This threshold is used in conjunction with the signal strength to determine whether there is interference present on the cell. Typically, values in excess of 3 with good signal strength usually indicate the presence of interference.
G_TimingAdvance_Max
This threshold is used in absence of the Distance parameter to determine the maximum distance allowed per cell. Typically, values over 16 (that is, approximately 8 km) are usually regarded as distant serving cells.
GSM / Cell_Plan_Viewer
G_Interference_Radius
This value is used to define a radius of analysis about a selected sector for coadjacent interference and neighbors visualizations in the Cell Plan Viewer. You can set the units to be used (either miles or kilometers) in Preferences, General Settings, Distance Units.
G_ScanSortSigLevel_Min
This value is used in relation to the scanner signal level; for example, in the Channel Overlap analysis in the GSM Cell Plan Viewer.
GSM / Events
G_Timeout_ChannelRequest
This value is used to determine the time (in ms) the system will wait for RR Channel Request messages to be answered before registering a Call Setup Failure. Default is 3000 ms.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
132
GSM / Spotlight
SL_GSM_Ant_Gain_Threshold
This threshold is the default Antenna gain, used in the calculation of pathloss. The default value is 18.4 dB.
SL_GSM_BTS_Sens_Threshold
This threshold is the default BTS receive sensitivity, used in the calculation of UL pathloss. The default value is -120 dBm.
SL_GSM_EIRP_Threshold
This threshold is the default EIRP, used in the calculation of DL pathloss. The default value is 55.
SL_GSM_High_TX_Power_Threshold
This threshold is used for determining a High TX condition. The default value is 30.
SL_GSM_RapidPathloss_RxLev_Threshold
This threshold is used in Rapid Pathloss detection, a condition of which is that RxLev has dropped by at least this threshold value within the defined time window. The RxQual condition must also be met for Rapid Pathloss to be detected. The default value is 5 dB.
SL_GSM_RapidPathloss_RxQual_Threshold
This threshold is used in Rapid Pathloss detection, a condition of which is that RxQual has dropped by at least this threshold value within the defined time window. The RxLev condition must also be met for Rapid Pathloss to be detected. The default value is 2.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
133
SL_GSM_RapidPathloss_Time_window_Threshold
This threshold is used to define the window over which Rapid Pathloss is performed. The default value is 3000 ms.
SL_GSM_Site_Issues_Dist_Threshold
This threshold is used in the outside beamwidth analysis, and only data within this distance from the site is considered for the analysis. The default value is 5000m.
GSM / Troubleshooter
G_Analysis_Time_After
This value is used to determine the time (in ms) allocated to investigate the radio conditions AFTER the detected event occurrence. Typically, values of 5000 to 10000 ms are used. Values less than 5000 ms will tend to be more accurate, but less attributes will be detected, while values in excess of 10000 ms tend to have a high detection of attributes, but with relatively low accuracy since the time under analysis is large.
G_Analysis_Time_Before
This value is used to determine the time (in ms) allocated to investigate the radio conditions PRIOR to the detected event occurrence. Typically, values of 5000 to 10000 ms are used. Values less than 5000 ms will tend to be more accurate, but fewer attributes will be detected, while values in excess of 10000 ms tend to detect a large number of attributes, but with relatively low accuracy since the time under analysis is large.
G_CallDropRate
This threshold is used to determine the criterion for KPI acceptance in the repository views. The Call Drop Rate should not exceed 2% of all successful calls in the busy hour. If the resulting KPI is equal to or less than this value, it will be
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
134
flagged as accepted and will show up as a green tick mark in the KPI table. If it is higher than this value, it will be flagged as failed and will show up as a red cross in the KPI table.
G_CallSetupSuccessRate
This threshold is used to determine the criterion for KPI acceptance in the repository views. The Call Setup Success Rate should be in excess of 98% for most GSM networks in the busy hour. If the resulting KPI is equal to or in excess of this value, it will be flagged as accepted and will show up as a green tick mark in the KPI table. If it is less than this value, it will be flagged as failed and will show up as a red cross in the KPI table.
G_HandoverSuccessRate
This threshold is used to determine the criterion for KPI acceptance in the repository views. The Handover Success Rate should be in excess of 98% for most GSM networks in the busy hour. If the resulting KPI is equal or in excess to this value, it will be flagged as accepted and will show up as a green tick mark in the KPI table. If it is less than this value, it will be flagged as failed and will show up as a red cross in the KPI table.
G_LocationUpdateSuccessRate
This threshold is used to determine the criterion for KPI acceptance in the repository views. The Location Update Success Rate should be in excess of 98% for most GSM networks in the busy hour. If the resulting KPI is equal or in excess to this value, it will be flagged as accepted and will show up as a green tick mark in the KPI table. If it is less than this value, it will be flagged as failed and will show up as a red cross in the KPI table.
G_OverAllSuccessRate
This threshold is used to determine the criterion for KPI acceptance in the repository views. The Overall Success Rate should be in excess of 98% for most
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
135
GSM networks in the busy hour. If the resulting KPI is equal or in excess to this value, it will be flagged as accepted and will show up as a green tick mark in the KPI table. If it is less than this value, it will be flagged as failed and will show up as a red cross in the KPI table.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
136
The RxLev of the serving cell must be better than this value before the cell will be considered in the analysis. The RxLev of the serving cell must be no further than this from the RxLev Threshold before the cell will be considered in the analysis. Defines the percentage of samples that must be reached to trigger a cell being added as a suggested neighbor. This is used to reduce the effect of stray signals. Defines the minimum percentage of samples that cells in the current neighbor list must achieve in order to be recommended for retention in the list. When the percentages of samples fall below this threshold, cells will be recommended for removal from the list. Only sectors which have been measured above the Ec/Io Threshold at least this many times will be included in the analysis. Note that the algorithm works off Binned data. Defines the maximum line-of-sight distance in meters between two cells for one to be considered for inclusion on the other's neighbor list. For rural areas where the average intersite distance is naturally greater than a dense urban environment, use a higher value. To disable this feature, set this value to 0.
0.2
Minimum Samples
50
5000
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
137
Setting
Default value 90
Description
Defines the maximum angle between the edge of a cell's beam width and the data point, for that cell to be considered for inclusion in the serving cell's neighbor list.
In this example, the beam width is shown as a darker blue arc, and the angle to site threshold in lighter blue arcs on either side. Acceptable data points are within this threshold of the candidate sector's beam width, and are also within the Maximum Intersite Distance (the blue circle). This threshold ensures that missing neighbors are not suggested from reflected signals or backlobes, and also that only cells angled towards the data point are suggested. To disable this feature, set this value to 0. Only process first best ARFCN Selected Select this option to analyze the neighbors of the best cell only. De-select this option if you want to analyze the neighbor list of all of the cells meeting the other criteria.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
138
Setting
Default value 32
Description
Defines the maximum number of recommended neighbors. Note that the higher the number of potential neighbors, the longer it will take for a handset to find appropriate neighbors, conceivably resulting in a dropped call.
Once a potential neighbor list has been calculated for each data point, they are aggregated by serving cell to produce the recommended neighbor list. This is compared with the existing list to calculate which are additions, retentions and removals.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
139
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
140
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
141
Call Setup Failure Diagnosis RR Failed Condition and notes An RR Channel Request is not followed by an RR Immediate Assignment with matching establishment cause and random reference within the time period specified by the G_Timeout_ChannelRequest threshold. An Immediate Reject message was received. Another RR Channel Request with the same establishment cause and random reference occurs more than 200 milliseconds after the RR Immediate Assignment and before the call setup is complete. Another RR Channel Request with a different establishment cause or random reference occurs at any time after the RR Immediate Assignment and before the call setup is complete.
A CM Service Abort / Reject message was received. When the cause code is Not Normal (0-31, 42) in either the NAS message or the RR Channel Release message. If ServRxLevSub < G_RxLevSub_Min. If ServRxQualSub > G_RxQualSub_Max. More investigation is needed. Use other tools and views to refine your understanding of the problem.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
142
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
143
An Immediate Reject message was received. Another RR Channel Request with the same establishment cause and random reference occurs more than 200 milliseconds after the RR Immediate Assignment and before the call setup is complete. Another RR Channel Request with a different establishment cause or random reference occurs at any time after the RR Immediate Assignment and before the call setup is complete.
A Location Update Failure message was received. If ServRxLevSub < G_RxLevSub_Min. If ServRxQualSub > G_RxQualSub_Max. When the cause code is Not Normal (0-31, 42) in either the NAS message or the RR Channel Release message.
Other
More investigation is needed. Use other tools and views to refine your understanding of the problem.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
144
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
145
Dropped Calls Diagnosis Condition and notes When the cause code is Not Normal (0-31, 42) in either the NAS message or the RR Channel Release message. Handset: If after the drop, BCH is not in the BA list, but was before the drop. Missing Neighbor Scanner: If one of the top 6 BCH is not in the BA list before the drop. If stronger neighbors than the serving cell for a period. See GSM Dragged Handovers. If ServRxLevSub < G_RxLevSub_Min. If ServRxQualSub > G_RxQualSub_Max. More investigation is needed. Use other tools and views to refine your understanding of the problem.
System Released
Handover Problem
Other
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
146
Handover Failure Diagnosis The diagnosis for Handover Failure is derived directly from the CauseCodeRR value. For example: Diagnosis Handover Impossible (TA out of Range) Channel mode unacceptable Frequency not implemented Condition and notes
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
147
BCCHColourAdjacentCells()
Define an analysis radius within which this visualization is to occur. Select a site with BCCH g_bcch. Inside the analysis radius, trigger the analysis for any site with co-channel interference, upper/lower adjacent channel interference: If the site has the same BCCH (otherBCCH==g_BCCH) Co-interference. For all the possible related TCHs, if otherTCH[j]==g_BCCH Co-interference. If the site has upper adjacent BCCH (otherBCCH==g_BCCH+1) Adjacent upper. If the site has lower adjacent BCCH (otherBCCH==g_BCCH-1) Adjacent lower. For all the possible related TCHs, check if otherTCH[j]==g_BCCH+1 Adjacent upper. For all the possible related TCHs, check if otherTCH[j]==g_BCCH-1 Adjacent lower.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
148
As each site can only have one color, the sequence of steps is very important: the first satisfied condition decides the color of the site in analysis. The colors used are: red for co-channel interference orange for upper adjacent channel interference yellow for lower adjacent channel interference. All site information is stored in three structures, one for the co-channel interference, one for the adj/low channel interference and one for the adj/upp channel interference. Three tables, sorted by distance from the selected site, contain information on the sites that neighbor the selected site: Distance from the selected site SiteName, Sector BSIC %Interference #InterferedChannels Channel.
%Interference is calculated as the ratio between the number of channels in common and the sum of all the channels. In the example below, if the other cell has 4 channels, 1 BCCH and 3 TCHs, and the selected cell BCCH is equal to one of the other cell TCHs, the number of channels in common is equal to 2. Then %Interference is equal to 2/(4+1) = 40%.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
149
In this case, BCCHColourAdjacentCells, #InterferedChannels is equal to 1. The Channel field gives the type and the number of the channel that gives interference, i.e. BCCH 740.
TCHColourAdjacentCells()
Define an analysis radius within which this visualization is to occur. Select a site with TCHs stored in g_tch. Inside the analysis radius, we trigger the analysis to any site for co-channel interference, upper/lower adjacent channel interference: for all the g_TCHi If the site has same BCCH (otherBCCH== g_TCHi) Co-interference. For all the possible related TCHs, if otherTCH[j]==g_TCHi Co-interference. If the site has upper adjacent BCCH (otherBCCH==g_TCHi +1) Adjacent upper. If the site has lower adjacent BCCH (otherBCCH==g_TCHi -1) Adjacent lower. For all the possible related TCHs, check if otherTCH[j]==g_TCHi +1 Adjacent upper. For all the possible related TCHs, check if otherTCH[j]==g_TCHi -1 Adjacent lower. As in BCCHColourAdjacentCells(), each site can only have one color, and so the sequence of steps is very important: the first satisfied condition decides the
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
150
color of the site in analysis. The colors used are: red for co-channel interference orange for upper adjacent channel interference yellow for lower adjacent channel interference. All site information is stored in three structures, one for the co-channel interference, one for the adj/low channel interference and one for the adj/upp channel interference. Three tables, sorted by distance from the selected site, contain information on the sites that neighbor the selected site: Distance from the selected site SiteName, Sector BSIC %Interference #InterferedChannels Channels.
%Interference is calculated as ratio between the number of channels in common and the sum of all the channels. In the example below, if the other cell has 4 channels, 1 BCCH and 3 TCHs, and the selected cell has 2 TCHs that are equal to the other cells BCCH and to one of the other cells TCHs, then the number of channels in common is equal to 4, and %Interference is equal to 4/(4+2).
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
151
In this case, #InterferedChannels is equal to 2. The Channels field gives the type and the number of the channels that give interference, i.e. BCCH 740, TCH 570, TCH 571.
Edition E
Actix Spotlight UMTS and GSM Training Course for Version 1.1
152
Edition E