Every machine is perfectly adjusted and sent out in perfect working order. If the learner finds difficulty in working it at the outset, the fault usually lies in her inexperience. Should the thread break, it is either beeaul8:1. The tension is too great (see page 7) or 2. The needle is too fine; or 4. The eye of the needle is sharp; or the point blunt; or 5. The needle-plate is not properly secured; or 7. The Shuttle-Tension Screw is projecting.
Every machine is perfectly adjusted and sent out in perfect working order. If the learner finds difficulty in working it at the outset, the fault usually lies in her inexperience. Should the thread break, it is either beeaul8:1. The tension is too great (see page 7) or 2. The needle is too fine; or 4. The eye of the needle is sharp; or the point blunt; or 5. The needle-plate is not properly secured; or 7. The Shuttle-Tension Screw is projecting.
Every machine is perfectly adjusted and sent out in perfect working order. If the learner finds difficulty in working it at the outset, the fault usually lies in her inexperience. Should the thread break, it is either beeaul8:1. The tension is too great (see page 7) or 2. The needle is too fine; or 4. The eye of the needle is sharp; or the point blunt; or 5. The needle-plate is not properly secured; or 7. The Shuttle-Tension Screw is projecting.