You are on page 1of 18

Car Security System (CSS)

Supervisor :

Prof.Dr. Ibrahem Qamar

Contents:

Introduction Detection Techniques User Access Program Controlling Techniques Hardware Design Future Extension Used Tools

Introduction:

The main idea of the project, is detecting the cases of car theft if occurred, then controlling the car to perform some operations by a mobile device.
!! Stolen !!!
Stopped

Alarm.. Stop!!!

Detection:

Getting cell ID of the users Mobile. Getting the cell ID of the mobile board in the car

Sending the two Cell IDs to a server


Updating a database with the new cell IDs.

Applying a simple algorithm to detect the theft case.

Sending Both Cell IDs


Data Base

Tomcat Web Server

Server The server gets the two cell Both of the Mobile and the IDs send the Cell ID of data car and updates the each base server to the

Data Base
ID Mobile No Car Car Cell Cell ID (new) ID(Old) User Cell ID Old User cell ID(new)

1 2 3 4 5

0105251630 0101553282 0102246998

1911 1911 1911 1911 1911 126 1911 126 123 1987 123 123

Safe State Safe State STOLEN!!

User Access Program:

User Access Program:

The user receives an alarm SMS from the server, So hell access this program which could be considered as the link between him and the MC in the car. Some options and features created by the J2ME program, and finally an encoded SMS sent to the Mobile Board in the car stands for some operations to be applied in the car.

Controlling Techniques:

Controlling Techniques

After Detection we control the stolen car.


Microcontroller is the brain of the controlling process

The microcontroller receives the encoded SMS through mobile device connected through the UART connection. Mobile device modem communicate with AT Commands with the MC.

Microcontroller action:

STOP

Lock doors

Initiate Call

Power down

Alarm

Flasher

Hardware Design:

Hardware Design

Hardware Design

Used Tools:

2 Mobiles supports AT commands +GPRS to connect to the server (Sony Ericsson k500 and Siemens SL65)
Microcontroller Training KIT
(burner). (*2)

ATMEL 8515 Microcontroller IC Printed Circuit Board


(PCB)

Hard ware components

(Relays Resistances- Cut Outs-Capacitors)

Future Extension:

More Improvements (infra, power,.)

Marketing the idea


Production

Thank You

Akers Team

Ahmed Abdel Fatah El-Nomany Mohamed Zain El-Abideen Mohammed Ahmed El-Motaz Mohamed Ramadan Shafik

Contact us: Akers_Team@yahoogroups.com

You might also like