Professional Documents
Culture Documents
DEFORMASI BATUAN
Tegangan yang terjadi akibat gerakan tektonik tersebut mempunyai arah sejajar permukaan bumi (mendatar) dari segala arah dan tegangan yang lain berasal dari dalam bumi ke arah permukaan bumi (vertikal). Kekuatan tegangan-tegangan tersebut berbeda satu sama lain baik arah mendatar maupun yang berarah vertikal, oleh karenanya tegangan ini sering dikenal dengan tegangan utama (principal stress). Berdasarkan perbedaan kekuatan tegangan tersebut dibedakan menjadi 3 bagian yaitu (s1) Tegangan utama maksimum, (s2) Tegangan utama menengah, dan (s3). Faktor lain yang berpengaruh adalah sifat fisik dan mekanik batuan, seperti misalnya bila batuan bersifat plastis maka batuan akan mengalami pelipatan teta[I bila btuan bersifat tegar (rigid) maka batuan akan retak/pecah.
4. DEFORMASI BATUAN
s1 `
s2 `
s3 `
s2 `
s1`
s2`
s1`
s3`
slate
sandstone
limestone
STRUKTUR GEOLOGI
Deformasi batuan adalah perubahan lapisan kerak bumi yang diakibatkan adanya tegangan yang bersasal dari gerakan tektonik Hasil dari proses deformasi batuan dikenal dengan Struktur geologi.
Struktur geologi adalah bentuk arsitektural lapisan batuan yang muncul dipermukaan bumi. Struktur geologi dapat dibedakan menjadi 4 macam yaitu : 1. Struktur kekar (joint) 2. Struktur patahan (fault) 3. Struktur lipatan (fold) 4. Struktur ketidakselarasan (unconformity)
Fundamental Structures
Contacts: are the most basic structures, they separate one rock unit from another depositional, unconformities, faults, intrusive, shear zones.
Fundamental Structures
Primary Structures: These are sedimentary structures that may be in strata prior to deformation. They may be quite useful as strain markers (giving us an initial state) and as wayup indicators, etc. They must not be mistaken for secondary structures, which are the result of deformation.
Primary Structures
Bedding Laminations
Graded Bedding
up
Cross-Beds (asymmetric)
up
up
Mud Cracks
Load Casts up up
up
up
up
Stromatolites
up
KEKAR (JOINT)
KEKAR (JOINT) adalah retakan yang mempunyai pola dan arah tertentu sesuai dengan tegangan penyebabnya.
Kekar gerus (Shear Joint) Kekar Tarik (Tension Joint) s1` Kekar release(Release Joint) Gambar 2 : Kekar yang terjadi akibat tegangan dari bawah
Plumose Structures
Secondary Structures
Shear fractures:
Form in response to a very slight shearing movement parallel to the plane of the fracture. Commonly found in conjugate sets, in rocks that have been folded or faulted.
Secondary Structures
Slickensides, slickenlines:
Effectively, they are small scratches that form in response to motion on a fault. May be the result of very large or very small displacements. Lines indicate direction of motion. Steps in rock or mineral coatings may indicate sense of slip.
PATAHAN
Kekar yang terbentuk akan membentuk suatu bidang dengan arah dan kemiringan tertentu. Oleh karena tegangan yang ditimbulkan oleh gerakan lempeng tektonik bekerja terus maka akan terjadi pergeseran mengikuti arah bidang kekar. Kekar yang mengalami pergeseran disebut dengan patahan atau sesar (fault). Arah dan kemiringan bidang kekar/patahan/lapisan mempunyai orientasi terhadap arah azimut bumi. Arah dan kemiringan dapat digambarkan seperti dibawah ini :
PATAHAN
Strike dan dip
Strike (jurus), s adalah garis potong bidang kekar/patahan/ lapisan dengan bidang datar imajiner a Dip (kemiringan), a adalah sudut yang dibentuk oleh bidang kekar/patahan/ apisan dengan bidang datar imajiner
b a c e d
Keterangan : ab - strike slip ac - net slip ad - dip slip ae - vertical slip (throw) ed - harizontal slip (heave)
PATAHAN
Patahan adalah pergeseran blok batuan mengikuti arah bidang kekar 1.PATAHAN TURUN adalah pergeseran bidang dinding (hanging wall) kearah turun
s1`
PATAHAN
2. PATAHAN NAIK
s1
PATAHAN
3. PATAHAN GESER
s1`
PATAHAN
4. PATAHAN DIAGONAL
s1`
s3
LIPATAN
There can be two (2) resulting responses to stress: 1. Ductile deformation -- usually occurring deeper and with higher temperatures; flow
2. Brittle deformation -- usually occurring shallower and with cooler temperatures
Ductile deformation produces folds: 1. Anticline -- upwarping of rocks to produce an "A-like" structure 2. Syncline -- downwarping of rocks to produce "spoon-like" structure 3. Dome -- three-dimensional anticline resembling inverted cereal bowl 4. Basin -- three-dimensional syncline resembling upright cereal bowl * When brittle deformation occurs and rocks fracture, they can simply crack producing a fracture with no offset, called a joint (= kekar). When brittle deformation occurs and rocks fracture, they can also crack producing a fracture with offset, called a fault (= patahan = sesar).
Homocline: rocks that dip uniformly in one direction Monocline: a local steepening with homocline Structural terrace: local flattening of a uniform
regional dip Cylindrical: The hinges are parallel every where and the fold can be generated by moving the fold axis parallel to itself (Fig. 14.9) Non-cylindrical: The hinges are not parallel and can converge in one point (Fig.14.9) Sheath folds: are non-cylindrical and closed at one end the fold hinges curve within axial surface (Fig. 14.10) Upright folds: have vertical axial surface (Fig. 14.11) Overturned folds: have one inverted limb (Fig. 14.11) Reclined folds: axes plunge at nearly same angle as the dip of the axial surface, plunge of the axis normal or at high angle to the strike of the axial plane (Fig. 14.11) Recumbent folds: Have horizontal axes and axial surfaces. Isoclinal folds: are tight folds wherein axial surfaces and limbs are parallel
To distinguish between the different type of folds Fig. 14.13 (after Fleuty 1964) is used.
(Fig. 14.14)