Professional Documents
Culture Documents
LiLi Tower
LiLi Tower
Hi there, this build is already started begin march, but really wanted to let it see on bit-tech It's called the LiLi Tower. I've always had a kind of love for the Lian Li cubes Not one but two Lian Li PC-V351 One is new and the other one has some changes already First i wanna thank some sponsors of this build Mr. Freddy
En Mr. Ruud
Thanks to these guys my start is going to be a little faster and nicer. Thnx!!! The hardware - I7 920 D0 - 6x 2GB Corsair DDR3 1600 - 2 x EVGA GTX470 - Antec True Power Quatro-1000 - 2 x Aqua-computer Aquaero VF - Asus Rampage III GENE etc. Water cooling - 2 x Black Ice GT Stealth 240 Black - 2 x EK GTX470 waterblock - EK Supreme CPU block - 2 x EK-Multioption RES X2 - 150 Advanced - 2 x Swiftech 355 - Tygon slang - Bitspower Fittingen And more......... The color is gonna be black and transparent Some pics of the LiLi's Number 1
And number 2
This is the only thing i have from this Lian, but it's not bad. Have some nice ideas for this
2 rads, 2 reservoirs en 2 pumps. Last week i did some measuring and drilling the rivets Sawn a piece out of the 5,25 bay for the cables from the gpu
And these grilz will be put here with transparent fans with white leds
Flipped the HDD bay, so now have space for 2 HDD's and a SSD
This space is gonna be sawn out of the top. (formerly the bottom)
The back is gonna be like this, but painted black and i need to get/make a plate for the gpu
Always nice to get a new motherboard. A sweet little rampage The Asus Rampage III Gene fat box
The motherboard
Shiny
installed it
Using a EK-Supreme HF
And my 2 GTX470 in it
Everything fits, in the top Lian i have a lot of space for the watercooling
This weekend i had a lot of sawning to do Almost nothing is left from the Lian The middle of the 2 Lians
Made a little mistake, i tought that the aquaero,s where the same but the are different versions,
So i had to drill the holes for the bolds again more to the left
Had some Acryl covers for the aquaero, but the aren't the same color. So need to order 1 more
Made a acryl midplate. This times 2, one for the top and one for the midplate
Made holes for the cpu and the Rams and made a slot for the gpu's
And the BP fillports, a total of 4. @ for the cpu and 2 for the RAM
Coolermaster has givven me some nice stuff for my build A nice package with all kind of things
everything measured
Power up
The are real quiet, and a lot of air And finally my acryl has arrived So sawn everything and drilled the holes Top left
Top right
Left
Right
Turned around
On each side there's gonna be brushed aluminium. Th original panels i have finished already
Left
And right
I did a lot of thinking about the reservoirs, and tried a lot of things I have spinbays, EK tubes 150 and EK tubes 250 Had taken some pics what i had tried The spinbays like this
Or like this
Was getting crazy about this problem, but then............. Not horizontal or vertical, but in a inclined position From the top. Have a lot of space in the middle for the tubes
Right side, almost the same as the left. Only the tubes gonna be with a different angle
i did some small stuff. I've tested the airflow through the mesh It wasn't that good, so i've sawn a piece out of it
Needs a paintjob
1 rectangle is bigger then the other one, this is because i dont wanted to see the suspension from the rads Also i had some Glostrings, nice stuff
I hoped they where white, but they are bleu/green, but doesnt matter. Had to change my midplate
like this
Nice light in it
Only i have 2 different colors blue, sow need to brainstorm for that
Also i have sold my 3 GTX470, and get some other nice gpu's
The hole thing is really havy, so need to make something for this
i had some nice stuff been delivered I think it,s the last stuff i need to finish this build, i hope So what did i get in: Some nice aluminium fans, the NorthQ 120MM 3711WL Silent Tornado
BP links
And 2 bottles of Feser Aqua ultra water The fans are coming across the motherboard, pulling fresh air over the board
Like this
And i have played with the glostrings, i did made it some more blue Top vertical line
Played with the different light sources, fans with the white led and some other leds
Yesterday i did the front The 2 push buttons. One for the on switch and one for the eject button Sawn a piece of acryl. and maked 2 holes in it
The plex behind the front is gonna be enlighted, so that you have a white ring from the button and one around the button Also placed the new acryl front for the aquaero
That's it for now Grtzzz. Because my pictures where offline for a while, i'm gonna treat you guys for another major update
This time i couldn,t resist to fill the top section of my Lian The good thing of this build is that i can fill the both sections separate So i can do the leak test without my hardware under it, i had some bad luck with BP rotery,s in the past First i had al the tube in place, solid and flexible Turned the pumps, only need to make a nice bracket for this
And fill it up
And yes, i had a leaking rotery under the reservoir not shocking, but need to exchange this Also placed some black fillports, just to see the looks of it Al the black fittings and fillports are also beeing exchanged by silver think it,s a nice effect, seems to be floating
Gonna be silver
Now everything is almost in place, i'am thinking to remove the FrozenQ reservoir. It's to much chaos, and to bright i think, so i have changed some big little things Removed the FrozenQ, just to get some peace in the upper section Instead of this i've made a piece of mirror acryl around the pumps to let it look like everything is one piece (The Tygon tubes are gonna be changed)
Connect the pumps together, just for the looks. Has no function, but looks nice
Around the pumps the mirror acryl, for this i have cut out 2 slots to fit the pumps in
Think this is much better with the FozenQ out. Now i made the top cover of the Lian Sawn the holes for the fillports and drilled holes
Over this there's gonna be a aluminium cover, but i'm thinking about this for the shape Also been busy with my Be quiet psu. all the way black sleeving and give a little paintjob to the back And a little piece of me on the pic
The curve for the motherboard cables De curve van de draadjes naar de mobo voeding
Gonna make a plate, just to get it the same like all the other covers
I am still waiting for silver fillports. When they arrived i can put everything together, and connect all the cables to the 2 aquaero's But the most cables are covered for now
Fortunately there are a lot of modders who think along with me. So my good friend Pascal came up with the brilliant idea. The SLI bridge out of steel, this after much polishing and you have a nickel look SLI bridge
Unfortunately you do not see that much any more of it when the upper part is over it, but still a little bit. I have the psu lowered for a few millimeters to get a line with the side panel
Pretty cool effect the acryl edge under the aluminum plate
I've Also made some adjustments to the top. The air that the turbine masters blow out in to the case must go somewhere. Thats why i've made slots in the top
For cables that are going to aquaero's. This still needs a cap over it.
Then it was time to play around with the tubes. The small tubes first
With silver fittings and fill ports it looks very nice now
The GPUs also connected. Left to the radiator and right to the pump
CPU connected
Rams also
Other loop
Top placed
Tonight I think i'm gonna fill it up and test for leaks. Grtzzz. Before filling, I have made a small change I dont like tubes crossing each other. So this is how it's gonna be
, you didn't miss anything, i think. Connection is just for fun, and to get the pumps in one line there,s almost no flow between the pumps, all the pressure goes to the outlets on the sides from the pumps. Didnt like the original color of the wire, it,s to soft, have seen the red (pink glow) and the white(green glow) but with some adjustment it,s much better This night i filled the tower up, no leaks Just a little teaser for you guys
Update: filling Last night filled the first loop. Fortunately, without too much trouble, went pretty smoothly. I just had to tighten the reservoir.
This morning filled the other loop. This went completely without problems
Plenty of bubbles.
Air bubbles were during the day all almost gone, but will still take some time before everything is out
I also received a couple of times the request to show the hole case. So for the occasion, I put the panels back. sleeving and connecting cables has to be done and some other small time-consuming things. And I think to lasercut the side-and top panels, instead of to go messing around to get it right. These side / top panel gonna have a nice thin edge and different forms (I think)
Lower aluminum panels are good like this with the acryl behind
Itself looks all right now, but still think the aluminum panels will be the finishing touch
- Fans are still to be modded (circle center) - I / O shield also to do something with - And there's gonna be a backplate for the psu
And front panels below needs to be made. Same dimensions as the two pieces as above
That's it for now Grtzzz. The LiLi Tower is of course not on hold. Was only in doubt whether I would let the custom side panels to be laser cutted or do it myself. Hmm, gonna do it myself. Measured it 3 times before cutting
And after a lot of cutting and filing, 1 x side panel. Others also made but of course in reverse
Panel 1
Panel 2
Side has been made and fit. It has the same angle as the reservoir
The display of the aquaero is blue now, I have been using dark blue filter Other one is still off, still needs to make the cable
Total shot
He already runs now for two weeks very smoothly. Needs to do some small things before the final pictures But these will certainly come. Grtzzz. Hi Y'all on this very sunny day (in the netherlands) Just one small addition to the previous update. I was hoping my sleeve for the McMod was coming in this weekend, but no. So cleaned the BBQ after one year of standing still. In about an hour I'm gonna put half a cow on it, and the feast can begin. In the meantime, I was still brainstorming about the LiLi tower. I just miss something ........ I know...........the top. With the last aluminum i have, made some nice pieces. Can can afford to mess it up because the plates are EOL over here The two plates measured and marked, holes made for the jigsaw
After some cutting and filing work got everything nice and straight.
And the other panel, slightly different. This for the line around to continue
Still need to drill the holes and the countersunk the bolts.
Now, there's nothing more to do with the outside appearance of the tower (I think) The inside can still use some light, so tonight's gonna play with loose LEDs and LED strips And I'm thinking hard to put a blue color in the water. Think it is very nice effect. I've Looked for Dye Mayhem Deep Blue, I think one of the better color additives. But nowhere in the Netherlands to obtain. Belgium either, and I am just told that the dye is EOL. Now I have no experience with Feser Feser Active UV dye or blue dye active clear / blue entries, so if anyone has used it already once, please let me know! Grtzzz. Today I've got my blue dye so I can finally show you some pictures of the case closed, and especially for the Motm
It was transparant
Some more
Add about 3 ml
One more to go
Some more
It's now the some blue color as the illuminated glo string in the middle
Other side
It's a lot of blue, but I hope you like it Just need to do some more cable manegement and put some nice lights in it So to be continued Almost done with the lightning, here some preview pictures, but...............more to come I used white SMD led strips
Need to make one flatcable for the aquaero, then LiLi Tower is finished
I know, there's a lot of pics...........better than a large piece of text I think That's it folks, Hope you like it Keep on modding
ust one small addition due to questions about aquaero The flat cable for the display and aquaero The Aquaero (old one that I had lying around)
This old versions can not be separated I think, and do not want it demolished. But those who are in the LiLi I could easily be separated
female connectors
And headers
Other side, crossed the wires. Careful split the wires with a knife
Almost finished
Header pushed in
Still needed to make one so a good reason for this mini tutorial
Grtzzz.
Source: http://forums.bit-tech.net/showthread.php?t=207160