Professional Documents
Culture Documents
MOUNTING OPTIONS
-00 LSI Track Fitting 00 LSI Track FittingLow profile Lexan fitting for 1 and 2 circuit LSI Track. Integral on/off switch and mechanical safety interlock for positive nonenergized making and breaking of fixture contacts with track. Available in Black, White, Silver, and Graphite Lexan to match fixture housings and track. Weight limit for ceiling mount is 15lbs., weight limit for wall mount is 10lbs. 00FSame as above with fuse. 5 13/16 overall length.
4 15/16 1 1/2
38mm
11/16
17mm
125mm
2-hole (0.25 diameter) flanged steel plate for any screw or bolt-up application. Integral on/off switch with 6-foot 3-wire grounding cord and NEMA 5-15 plug (120V) or NEMA 7-15 plug (277V) where applicable. Available in LSI Black, White, Silver, and Graphite paint finish to match fixture housings. White finish supplied with white cord, all other finishes supplied with black cord. Coiled cord available as an option.
1 1/4
32mm
4 3/8
111mm
3 3/8
86mm
1 1/2
38mm
Extruded aluminum theatrical pipe clamp for pipes from 5/8 to 2 O.D. Integral on/off switch with 6-foot 3-wire grounding cord and NEMA 5-15 plug (120V) or NEMA 7-15 plug (277V) where applicable. Available in LSI Black, White, Silver, and Graphite paint finish to match fixture housings. White finish supplied with white cord, all other finishes supplied with black cord. Coiled cord available as an option.
5/8
16mm
2 3/8
60mm
4
102mm
Cushioned iron weighted base for floor or table use. Integral on/off switch with 6-foot 3-wire grounding cord and NEMA 5-15 plug (120V) where applicable. Available in LSI Black, White, Silver, and Graphite paint finish to match fixture housings. White finish supplied with white cord, all other finishes supplied with black cord. Coiled cord available as an option. Non-UL listed.
5
127mm
1
25mm
www.LightingServicesInc.com
Mounting Options
6/09
MOUNTING OPTIONS
-5 Canopy Fitting 5 Canopy Fitting15/16 deep by 5 diameter steel canopy for permanent mounting on standard 4 electrical octagonal outlet box. Fixture supplied with 6 hi-temp leads ready for splicing. No switch. Available in LSI Black, White, Silver, and Graphite paint finish to match fixture housings.
5
127mm
15/16
24mm
3 1/2
89mm
5A Canopy FittingSame as above with 5/16 depth. 5E Canopy FittingSame as above with integral
transformer for certain low voltage fixtures. See specific catalog sheets.
Unimount
Unimount, Surface TrackSingle fixture mounting which attaches to standard flush electrical outlet box. Accepts most single LSI track-mounted fixtures with -00 and -00F fitting. Wired with 6 of high temperature wire for 500 watt maximum, single circuit. Available in LSI Black, White, Silver, and Graphite paint finish to match fixture housings.
Surface
1 5/8
41mm
10 13/16
275mm
Recessed - Flanged
7 1/8
181mm
4 1/4
109mm
12 11/16
322mm
Recessed - Flangeless
7 1/8
181mm
4 1/4
109mm
5/8
16mm
10 3/4
273mm
6/09
www.LightingServicesInc.com